When performing linker relaxation, reduce the size of symbols that span
the deleted bytes. This ensures that, for example, function symbols
will have the correct size.
bfd/ChangeLog:
* elf32-avr.c (elf32_avr_relax_delete_bytes): During linker
relaxation, reduce the size of symbols that span the deleted
bytes.
ld/ChangeLog:
* testsuite/ld-avr/relax-02.d: Update to check size of symbols has
changed.
* testsuite/ld-avr/relax-03.d: Likewise.
Symbols at the very end of a section were not being updated correctly
when linker relaxation takes place due to the use of '<' instead of
'<='. Added a couple of tests to cover this behaviour.
bfd/ChangeLog:
* elf32-avr.c (elf32_avr_relax_delete_bytes): Modify symbols
located at the very end of the section.
ld/ChangeLog:
* ld/testsuite/ld-avr/relax-02.d: New file.
* ld/testsuite/ld-avr/relax-02.s: New file.
* ld/testsuite/ld-avr/relax-03.d: New file.
* ld/testsuite/ld-avr/relax-03.s: New file.
2014-10-22 Tejas Belagod <tejas.belagod@arm.com>
bfd/
* bfd-in.h (bfd_elf64_aarch64_set_options): Add a parameter.
* bfd-in2.h (bfd_elf64_aarch64_set_options): Likewise.
* elfnn-aarch64.c (aarch64_erratum_835769_stub): New.
(elf_aarch64_stub_type): Add new type
aarch64_stub_erratum_835769_veneer.
(elf_aarch64_stub_hash_entry): New fields for erratum 835769.
(aarch64_erratum_835769_fix): New data struct to record erratum
835769.
(elf_aarch64_link_hash_table: Global flags for 835769.
(aarch64_build_one_stub): Add case for 835769.
(aarch64_size_one_stub): Likewise.
(aarch64_mem_op_p, aarch64_mlxl_p,
aarch64_erratum_sequence,erratum_835769_scan):
New. Decode and scan functions for erratum 835769.
(elf_aarch64_create_or_find_stub_sec): New.
(elfNN_aarch64_size_stubs): Look for erratum 835769 and record
them.
(bfd_elfNN_aarch64_set_options: Set global flag for 835769.
(erratum_835769_branch_to_stub_data,
make_branch_to_erratum_835769_stub):New. Connect up all the
erratum stubs to occurances by branches.
(elfNN_aarch64_write_section): New hook.
(aarch64_map_one_stub): Output erratum stub symbol.
(elfNN_aarch64_size_dynamic_sections): Init mapping symbol
information for erratum 835769.
(elf_backend_write_section): Define.
ld/
* emultempl/aarch64elf.em: Add command-line option for erratum
835769.
ld/testsuite/
* ld-aarch64/aarch64-elf.exp (aarch64elftests): Drive erratum
835769 tests.
* ld-aarch64/erratum835769.d: New.
* ld-aarch64/erratum835769.s: New.
For binary ouput, we don't have an ELF bfd output so can't access
elf_elfheader. The elf64-ppc.c changes are really just a tidy,
triggered by looking at all places where the abiversion bits are
accessed.
bfd/
* elf64-ppc.c (ppc64_elf_before_check_relocs): Do .opd processing
even when output is not ppc64 ELF. Remove redundant tests on
type of input bfd.
ld/
PR 17488
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_finish): Don't attempt
to access ELF header e_flags when not ppc64 ELF output.
* ldlex.l (INPUTLIST): New start condition.
(comment pattern, ",", "(", ")", "AS_NEEDED")
({FILENAMECHAR1}{FILENAMECHAR}*, "-l"{FILENAMECHAR}+)
(quoted string pattern, whitespace pattern): Add INPUTLIST to
valid start conditions.
(<INPUTLIST>"="{FILENAMECHAR1}{FILENAMECHAR}*): New NAME rule.
(ldlex_inputlist): New start-condition-setter function.
* ldgram.y (input_list1): Rename from input_list. All recursive
use changed.
(input_list): New wrapper rule for input_list1, setting
INPUTLIST lexer state for the duration of parsing input_list1.
All this to say INPUT(=/path/to/file) and not be forced to use
INPUT("=/path/to/file") whenever there's a need to force a sysroot-
prefix. Still, IMHO it seems better to make use of a previously
invalid syntax and not only change the meaning of quoted =-prefixed
paths (though arguably that's not very useful before this patchset).
This got a little bit hairier than I'd expected: I had to add a new
lexer state (aka. start condition) to avoid a first "=" being lexed as
the token "=", despite that not making sense in constructs expecting
file-names in the first place. (The grammar doesn't allow for
expressions in any part of those lists.) I guess I *could* have made
it work using that token anyway, but I didn't like the idea that you
would be able to separate the "=" from the rest of the file-name with
whitespace.
* ldlang.c (lang_add_input_file): If the first character in the
filename is '=', prepend the sysroot and force the context of that
input file to non-sysroot.
The "input_flags.sysrooted = 0" thing described in the comment is
covered by the testsuite part ("root-anchored =-prefixed script
inside"), but only observable for --with-sysroot configurations.
* ld.texinfo (input files in linker scripts): When mentioning
behavior of first character "/" on scripts within sysroot, also
mention that effect can be forced by prefixing with "=" and
refer to SEARCH_DIR.
The idea here is to drop .eh_frame FDEs corresponding to dropped
comdat group sections or linkonce sections, but not perform changes in
encoding.
bfd/
PR 17467
* elf-eh-frame.c (ENSURE_NO_RELOCS): Don't stop at first NONE reloc.
(_bfd_elf_parse_eh_frame): When relocatable output, don't set
flags enabling conversion of CIEs and FDEs to use relative encoding.
(find_merged_cie): Similarly.
(_bfd_elf_write_section_eh_frame): Don't edit FDEs when
relocatable, except for CIE pointer.
* elflink.c (bfd_elf_reloc_symbol_deleted_p): Return true for
relocs against symbols in dropped comdat group sections.
(bfd_elf_discard_info): Do some eh_frame optimisation when
relocatable.
ld/
* ldlang.c (lang_add_section): Set up map_head.s and map_tail.s when
relocatable.
Refactor each relaxation pattern to raise the maintainability.
In origin, all patterns is analysed in nds32_elf_relax_section,
so it is hard to debug and maintain. Therefore, we classify all
patterns into different functions in this patch.
Moreover, we adjust all optimizations into nds32_elf_relax_section
to take these optimizations in turn. This can promise all relaxation
being done after calling gld${EMULATION_NAME}_after_allocation.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
The section name used to store the build-id on pe/coff is arbitrary, as it's
contents should be located using the pe/coff header's DataDirectory debug data
entry, not by using the section name.
But '.build-id' is not a good choice for that section name, as it is 9
characters long, and hence truncated to 8 characters when
--disable-long-section-names is used (which is the default, when producing an
executable with no dwarf debug sections, e.g. using ld --strip-all --build-id)
This truncation then breaks 'objcopy --only-keep-debug', which does use the
section name, due to concerns that keeping an arbitrary section which contains
the debug directory is not sensible.
binutils/ChangeLog
2014-09-01 Jon TURNEY <jon.turney@dronecode.org.uk>
* objcopy.c (is_nondebug_keep_contents_section): Change pe/coff
build-id section name from '.build-id' to '.buildid'.
ld/ChangeLog
2014-09-01 Jon TURNEY <jon.turney@dronecode.org.uk>
* emultempl/pe.em (write_build_id, setup_build_id): Change pe/coff
build-id section name from '.build-id' to '.buildid'.
* emultempl/pep.em (write_build_id, setup_build_id): Ditto.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
I noticed recently that .eh_frame FDEs generated by the linker for
call stubs and .glink weren't being indexed in .eh_frame_hdr, due to
bfd_elf_discard_info being run before the linker generated .eh_frame
sections were available for parsing. This patch moves code around in
elf64-ppc.c and ppc64elf.em to avoid that problem.
Another problem fixed here is that --gc-sections parses .eh_frame
early, and the existing machinery allows only one go at parsing the
.eh_frame sections. That resulted in the linker generated .eh_frame
CIEs not being merged and no .eh_frame_hdr index entries for those
FDEs. It turns out that all the info from parsing .eh_frame is
attached to the section, so order of parsing isn't important, and
after parsing sec_info_type being set will prevent a section being
parsed again. At least, when parsing doesn't hit an error. So there
isn't really any need for "parsed_eh_frame". "merge_cies" is also
redundant, which means _bfd_elf_{begin,end}_eh_frame_parsing can also
disappear.
bfd/
* elf-bfd.h (struct eh_frame_hdr_info): Delete merge_cies and
parsed_eh_frames.
(_bfd_elf_begin_eh_frame_parsing): Delete.
(_bfd_elf_end_eh_frame_parsing): Delete.
* elf-eh-frame.c (_bfd_elf_begin_eh_frame_parsing): Delete.
(_bfd_elf_end_eh_frame_parsing): Delete.
(_bfd_elf_parse_eh_frame): Don't test parsed_eh_frame. Test
!info->relocatable in place of merge_cies.
* elflink.c (bfd_elf_gc_sections, bfd_elf_discard_info): Adjust.
* elf64-ppc.c (glink_eh_frame_cie): Pad to multiple of 8.
(ppc64_elf_size_stubs): Likewise pad stub FDE.
(ppc64_elf_build_stubs): Move code setting glink .eh_frame to..
(ppc64_elf_size_stubs): ..here and..
(ppc64_elf_finish_dynamic_sections): ..here.
ld/
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_after_allocation): Call
bfd_elf_discard_info after generating glink .eh_frame. Delete
redundant test on ppc64_elf_setup_section_lists status.
At the moment it is possible to configure binutils for these triples
but the resulting linker defaults to little endian with huge numbers
of testsuite failures, which on the face of it does not appear to make
much sense.
This patch makes the behaviour similar to armeb-elf and the testsuite
is clean.
bfd/ChangeLog:
2014-08-20 Will Newton <will.newton@linaro.org>
* config.bfd: Default armeb-*-eabi* to big endian.
ld/ChangeLog:
2014-08-20 Will Newton <will.newton@linaro.org>
* configure.tgt: Default armeb-*-eabi* to big endian.
addresses outside of the 32-bit range before memory exhaustion. This
results in a higher entropy implementation of ASLR when used with the
DYNAMIC_BASE flag.
* include/coff/pe.h: Add HIGH_ENTROPY_VA flag
* ld/emultempl/pep.em: Add --high-entropy-va switch
* ld/ld.texinfo: Document the --high-entropy-va switch
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
PR 17287
bfd/
* elflink.c (on_needed_list): Only consider libraries that have
been loaded.
ld/
* ld.texinfo (--as-needed): Clarify that references from libraries
must be from needed libraries.
ld/testsuite/
* ld-plugin/needed3.c: New file.
* ld-elf/shared.exp: Add needed3 test.
Presents .eh_frame input sections to the optimisation machinery in
elf-eh-frame.c in the order they are given by the linker script.
PR 16563
bfd/
* elflink.c (bfd_elf_discard_info): Process .eh_frame and .stab
in the order they are mapped to output sections.
ld/
* ldlang.c (map_head_is_link_order): Rename from
stripped_excluded_sections.
(lang_clear_os_map): New function, extracted from..
(strip_excluded_output_sections): ..here.
* ldlang.h (lang_clear_os_map): Declare.
* ldwrite.c (ldwrite): Call lang_clear_os_map.
* emultempl/sh64elf.em (sh64_elf_${EMULATION_NAME}_after_allocation):
Likewise.
This also makes --enable-plugins default to on for hosts that can
support plugins, so we have consistent lto toolchain support. The
ACX_LARGEFILE moves aren't strictly necessary, but are harmless and
will be necessary if plugin support is extended to more hosts via
libtool's dlopen support. I started down that path then decided it
was more work than I was interested in doing. (ACX_LARGEFILE invokes
AC_PLUGINS.)
config/
* plugins.m4: Test for dlfcn.h or windows.h here to set default
for --enable-plugins. Report error if someone tries to enable
plugins on a host we don't support.
bfd/
* configure.ac: Delete redundant plugin related checks.
* configure: Regenerate.
binutils/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gas/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gprof/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* configure: Regenerate.
* gconfig.in: Regenerate.
ld/
* configure.ac: Move AC_PROG_CC and other macros earlier. Delete
plugin checks now done in config/plugins.m4.
* config.in: Regenerate.
* configure: Regenerate.
The main aim of this change was to have non_ir_ref set correctly on
new indirect symbols. I could have added a "copy" param to the "notice"
function, so that indirect symbols could be created in plugin_notice,
but it seemed cleaner to create indirect syms earlier and pass them
rather than "string" to "notice".
include/
* bfdlink.h (struct bfd_link_callbacks <notice>): Remove "string"
param, add "inh".
bfd/
* coff-aux.c (coff_m68k_aux_link_add_one_symbol): Only call "notice"
here when not calling the generic add_symbol function. Formatting.
Correct handling of indirect symbols. Update notice call.
* elflink.c (_bfd_elf_notice_as_needed): Update notice call.
* linker.c (_bfd_generic_link_add_one_symbol): Create indirect
symbols early. Update notice call. Add comments regarding weak
symbols vs. indirect.
ld/
* ldmain.c (notice): Update args.
* plugin.c (plugin_notice): Likewise. Follow warning sym link.
Handle new indirect symbol.
Override the default value of 0x0000 defined in
TEXT_START_ADDR to avoid linux executables to be mapped
at zero page.
ld/
* emulparams/elf32or1k_linux.sh (TEXT_START_ADDR): Increase from
0x0 to first page boundary at 0x2000.
is_inconsistent_linkonce_section makes an assumption that section name
that starts with ".gnu.linkonce.prop." has one more dot in its suffix.
However gas generates such section name by insertion of "prop." right
after ".gnu.linkonce." part of the name of the original section. So, for
section named ".gnu.linkonce.this_module" corresponding property section
name does not satisfy the assumption. Such section names are common in
linux modules. This bug was exposed by the patch "a35d5e8 Fix alignment
for the first section frag on xtensa", that makes gas produce property
section for each section that has ".align" directive in it.
Use suffix that immediately follows ".gnu.linkonce.prop." when there are
no more dots following it.
2014-07-10 Max Filippov <jcmvbkbc@gmail.com>
ld/
* emultempl/xtensaelf.em (is_inconsistent_linkonce_section):
correctly handle missing dot in section name after
".gnu.linkonce.prop.".
Increase the maximum page size to 64kB and align the TEXT_START_ADDR
to a 64kB boundary. This brings AArch32 in line with AArch64 and
improves compatability under certain conditions.
bfd/ChangeLog:
2014-07-08 Will Newton <will.newton@linaro.org>
* elf32-arm.c (ELF_MAXPAGESIZE): Increase the default
value to 64kB and remove custom setting for NaCl.
ld/ChangeLog:
2014-07-08 Will Newton <will.newton@linaro.org>
* emulparams/armelf_linux.sh (TEXT_START_ADDR): Increase
alignment to 64kB boundary.
ld/testsuite/ChangeLog:
2014-07-08 Will Newton <will.newton@linaro.org>
* ld-arm/arm-lib.ld: Increase MAXPAGESIZE value to
match bfd.
* ld-arm/cortex-a8-fix-bl-rel-plt.d: Update offsets to
take into account increased segment alignment.
* ld-arm/ifunc-gdesc.r: Likewise.
* ld-arm/tls-lib.d: Likewise.
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
When a shared library appears within --start-group/--end-group ld may
only discover a need for loading the library on the second or
subsequent pass over archive libraries, as more objects are extracted.
ld/
PR 17068
* ldlang.c (load_symbols): Always check flags.reload.
(open_input_bfds): Always reload --as-needed shared libraries,
not just when rescanning.
* ldlang.h (struct lang_input_statement_flags): Update reload comment.
* plugin.c (plugin_should_reload): Assume shared library arg.
* plugin.h (plugin_should_reload): Update comment.
ld/testsuite
* ld-elf/pr17068.s: New.
* ld-elf/pr17068a.s: New.
* ld-elf/pr17068b.s: New.
* ld-elf/pr17068c.s: New.
* ld-elf/pr17068d.s: New.
* ld-elf/pr17068e.s: New.
* ld-elf/pr17068ez.s: New.
* ld-elf/elf.exp: Run new test.
The undefined function symbols (with non-zero value) on global entry
stubs are discarded by objdump when disassembling, so give objdump
another symbol to mark the stubs.
Also fixes a couple of bugs:
- entry_section was set to .opd for ELFv2, which meant a hard error
rather than a warning when _start wasn't defined.
- global entry stubs were not built if they were the only type of
stub in an executable.
bfd/
* elf64-ppc.c (ppc_stub_type): Add ppc_stub_global_entry.
(struct ppc_link_hash_table): Increase size of stub_count array.
(build_global_entry_stubs): Emit symbol on global entry stub.
(ppc64_elf_build_stubs): NULL check htab->brlt. Add global entry
stub stats.
ld/
* emultempl/ppc64elf.em (stub_added): Delete.
(gld${EMULATION_NAME}_finish): Call ppc64_elf_build_stubs even when
none of the usual stubs have been added. Only change entry_section
for ELFv1.
sys/param.h on recent versions of powerpc glibc ends up including
asm/elf.h via asm/sigcontex.h. asm/elf.h defines R_PPC_* and R_PPC64_*
macros, which clash with our include/elf/ppc.h and include/elf/ppc64.h.
It turns out that no current source uses LD_PATHMAX, so there is no
need for limits.h or sys/param.h, except for one occurrence of UINT_MAX.
I don't have a quarrel with limits.h, but it seems unnecessary just
for UINT_MAX.
* sysdep.h: Don't include limits.h and sys/param.h. Don't
include unistd.h twice.
(LD_PATHMAX): Don't define.
* ldlang.c (lang_common): Don't use UINT_MAX.
Alan Modra
Andrew Burgess
Nick Clifton
Jiong Wang
Hans-Peter Nilsson
Tristan Gingold
Kuan-Lin Chen
Andrew Bennett
Jon TURNEY
Andreas Tobler
Maciej W. Rozycki
Will Newton
Yaakov Selkowitz
Ulrich Drepper
Matthew Fortune
Anthony Green
Stefan Kristiansson
Max Filippov
Denis Chertykov