* elf64-ppc.c (create_linkage_sections): Create sfpr when
save_restore_funcs, rest of sections when not relocatable.
(ppc64_elf_init_stub_bfd): Always call create_linkage_sections.
(sfpr_define): Define all symbols on emitted code.
(ppc64_elf_func_desc_adjust): Adjust for sfpr now being created
when relocatable. Move sfpr_define loop earlier.
Currently, 31-bit gdbserver doesn't support collecting/supplying high
GPRs, VX registers, and TDB data. This is not much of a problem now,
since machines that have them usually have a 64-bit gdbserver that can
be used to debug 31-bit targets just fine. However, with fast
tracepoints, it's not possible to use a 64-bit gdbserver with a 31-bit
IPA (and thus a 31-bit target), so 31-bit gdbserver has to be used
for 31-bit targets. Thus, this patch is needed to allow collecting
high GPRs and VX registers on 31-bit targets via fast tracepoints.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_num_regs_3264): Define on 31-bit too.
(s390_regmap_3264) [!__s390x__]: New global.
(s390_collect_ptrace_register): Skip map entries containing -1.
(s390_supply_ptrace_register): Ditto.
(s390_fill_gprs_high): New function.
(s390_store_gprs_high): New function.
(s390_regsets): Add NT_S390_HIGH_GPRS.
(s390_get_hwcap): Enable on 31-bit.
(have_hwcap_s390_high_gprs): Enable on 31-bit.
(s390_arch_setup): Enable detection of high GPRs, TDB, VX on 31-bit.
Detect NT_S390_HIGH_GPRS.
(s390_usrregs_info_3264): Enable on 31-bit.
(s390_regs_info): Enable regs_info_3264 on 31-bit.
(initialize_low_arch): Initialize s390_regsets_info_3264 on 31-bit.
This patch removes gdb.base/branches.c which was added by the following
commit, but it is not used at all.
commit ea8122af14
Author: John Metzler <jmetzler@cygnus>
Date: Thu Apr 16 17:56:11 1998 +0000
Thu Apr 16 10:52:34 1998 John Metzler <jmetzler@cygnus.com>
* gdb.base/branches.c: Code with lots of loops and
subroutines. Used to test gdbs ability to single step through PC
changes, especially to test mips-tdep.c:mips_next_pc
gdb/testsuite:
2016-02-25 Yao Qi <yao.qi@linaro.org>
* gdb.base/branches.c: Remove.
If gdbserver and IPA are using different tdesc, they will disagree
about 'R' trace packet size. This results in mangled traces.
To make sure they pick the same tdesc, gdbserver pokes the tdesc
(specified as an index in a target-specific list) into a global
variable in IPA. In theory, IPA could find out the tdesc on its
own, but that may be complex (in particular, I don't know how to
tell whether we have LAST_BREAK on s390 without messing with ptrace),
and we'd have to duplicate the logic.
Tested on i386 and x86_64. On i386, it fixes two FAILs in ftrace.exp.
On x86_64, these failures have been KFAILed - one of them works now,
but the other now fails due to an unrelated reason (ugh).
gdb/gdbserver/ChangeLog:
PR gdb/13808
* Makefile.in: Add i386-*-linux-ipa.o and amd64-*-linux-ipa.o.
* configure.srv: Ditto.
* linux-aarch64-ipa.c (get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment.
* linux-amd64-ipa.c: Add "linux-x86-tdesc.h" include.
(init_registers_amd64_linux): Remove prototype.
(tdesc_amd64_linux): Remove declaration.
(get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment,
initialize remaining tdescs.
* linux-i386-ipa.c: Add "linux-x86-tdesc.h" include.
(init_registers_i386_linux): Remove prototype.
(tdesc_i386_linux): Remove declaration.
(get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment,
initialize remaining tdescs.
* linux-low.c (linux_get_ipa_tdesc_idx): New function.
(linux_target_ops): wire in linux_get_ipa_tdesc_idx.
* linux-low.h (struct linux_target_ops): Add get_ipa_tdesc_idx.
* linux-x86-low.c: Move tdesc declarations to linux-x86-tdesc.h.
(x86_get_ipa_tdesc_idx): New function.
(the_low_target): Wire in x86_get_ipa_tdesc_idx.
* linux-x86-tdesc.h: New file.
* target.h (struct target_ops): Add get_ipa_tdesc_idx.
(target_get_ipa_tdesc_idx): New macro.
* tracepoint.c (ipa_tdesc_idx): New macro.
(struct ipa_sym_addresses): Add addr_ipa_tdesc_idx.
(symbol_list): Add ipa_tdesc_idx.
(cmd_qtstart): Write ipa_tdesc_idx in the target.
(ipa_tdesc): Remove.
(ipa_tdesc_idx): New variable.
(get_context_regcache): Use get_ipa_tdesc.
(gdb_collect): Ditto.
(gdb_probe): Ditto.
* tracepoint.h (get_ipa_tdesc): New prototype.
(ipa_tdesc): Remove.
gdb/testsuite/ChangeLog:
PR gdb/13808
* gdb.trace/ftrace.exp (test_fast_tracepoints): Remove kfail.
We see this error when building with gcc 4.3.
../../gdb/i386-linux-tdep.c: In function ‘i386_linux_handle_segmentation_fault’:
../../gdb/i386-linux-tdep.c:399: error: ‘access’ may be used uninitialized in this function
../../gdb/i386-linux-tdep.c:399: error: ‘upper_bound’ may be used uninitialized in this function
../../gdb/i386-linux-tdep.c:399: error: ‘lower_bound’ may be used uninitialized in this function
It's a false positive, since the variables will always get initialized
in the TRY clause, and the CATCH returns.
gdb/ChangeLog:
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
Initialize variables.
The check used hardcoded targets and wasn't doing anything useful anyway,
since unsupported architectures blow up on link due to missing the IPA
library before they ever get to that check.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Remove unnecessary target check.
The PPC64 tracepoint patch added \y at the end of the call_insn pattern -
without that, it embarassed itself and matched the 'bl' in "Dump of
assem*bl*er code for function" as the powerpc call opcode. Since that
sounds like a generally good idea, I've added \y before and after
call_insn for every target. As a result, I had to change x86_64's mnemonic
to 'callq'.
gdb/testsuite/ChangeLog:
* gdb.trace/entry-values.exp: Surround $call_insn with '\y',
change x86_64 call_insn to 'callq'.
When encoding the agent expression operation ax_reg or ax_reg_mask, the
register number used is internal to GDB. However GDBServer expects a tdesc
based number.
This usually does not cause a problem since at the moment, for raw
registers GDBServer R trace action ignores the register mask and just
collects all registers.
It can be a problem, however with pseudo registers on some platforms if the
tdesc number doesn't match the GDB internal register number.
This is the case with ARM, the upcoming ARM tracepoint support, fails
these test cases without this patch:
gdb.trace/collection.exp: collect register locals collectively:*
GDBSever would exit with: unhandled register size
Since the register number is not mapped.
This patch fixes these issues by calling gdbarch_remote_register_number
before encoding the register number in the ax_reg or ax_reg_mask operation.
Tested on x86 native-gdbserver no regressions observed.
gdb/ChangeLog:
* ax-general.c (ax_reg): Call gdbarch_remote_register_number.
(ax_reg_mask): Likewise.
Add elf_x86_64_need_pic and replace x86_64_elf_howto_table[r_type].name
with howto->name.
* elf64-x86-64.c (elf_x86_64_need_pic): New function.
(elf_x86_64_relocate_section): Use it. Replace
x86_64_elf_howto_table[r_type] with howto.
Some gas tests are excluded for arc targets using the pattern arc-*-*,
however this only covers little endian arc targets. This commit extends
the patter to cover big endian arc targets, the pattern is now arc*-*-*.
gas/ChangeLog:
* testsuite/gas/all/gas.exp: Change target pattern to cover
arceb-*.
* testsuite/gas/all/redef3.d: Likewise.
* testsuite/gas/elf/elf.exp: Likewise.
We need to update symbol version for symbols from linker script.
bfd/
PR ld/19698
* elflink.c (bfd_elf_record_link_assignment): Set versioned if
symbol version is unknown.
ld/
PR ld/19698
* testsuite/ld-elf/pr19698.d: New file.
* testsuite/ld-elf/pr19698.s: Likewise.
* testsuite/ld-elf/pr19698.t: Likewise.
This unbreaks pending/delayed breakpoints handling, as well as
hardware watchpoints, on MIPS.
Ref: https://sourceware.org/ml/gdb-patches/2016-02/msg00681.html
The MIPS kernel reports SI_KERNEL for all kernel generated traps,
instead of TRAP_BRKPT / TRAP_HWBKPT, but GDB isn't aware of this.
Basically, this commit:
- Folds watchpoints logic into check_stopped_by_breakpoint, and
renames it to save_stop_reason.
- Adds GDB_ARCH_IS_TRAP_HWBKPT.
- Makes MIPS set both GDB_ARCH_IS_TRAP_BRPT and
GDB_ARCH_IS_TRAP_HWBKPT to SI_KERNEL. In save_stop_reason, we
handle the case of the same si_code returning true for both
TRAP_BRPT and TRAP_HWBKPT by looking at what the debug registers
say.
Tested on x86-64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2016-02-24 Pedro Alves <palves@redhat.com>
* linux-nat.c (save_sigtrap) Delete.
(stop_wait_callback): Call save_stop_reason instead of
save_sigtrap.
(check_stopped_by_breakpoint): Rename to ...
(save_stop_reason): ... this. Bits of save_sigtrap folded here.
Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out
common code between the USE_SIGTRAP_SIGINFO and
!USE_SIGTRAP_SIGINFO blocks.
(linux_nat_filter_event): Call save_stop_reason instead of
save_sigtrap.
* nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
si_code for MIPS.
* nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add
comments on MIPS behavior.
(GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.
gdb/gdbserver/ChangeLog:
2016-02-24 Pedro Alves <palves@redhat.com>
* linux-low.c (check_stopped_by_breakpoint): Rename to ...
(save_stop_reason): ... this. Use GDB_ARCH_IS_TRAP_HWBKPT and
handle ambiguous GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT.
Factor out common code between the USE_SIGTRAP_SIGINFO and
!USE_SIGTRAP_SIGINFO blocks.
(linux_low_filter_event): Call save_stop_reason instead of
check_stopped_by_breakpoint and check_stopped_by_watchpoint.
Update comments.
(linux_wait_1): Update comments.
As it is planned to add more architectures to this test, rename to a more
generic name.
gdb/testsuite/ChangeLog:
* gdb.trace/tfile-avx.c: Move to...
* gdb.trace/tracefile-pseudo-reg.c: Here.
* gdb.trace/tfile-avx.exp: Move to...
* gdb.trace/tracefile-pseudo-reg.exp: Here.
Support z-point, so tracepoints and breakpoints can be inserted at the same
location.
gdb/gdbserver/ChangeLog:
2016-02-24 Wei-cheng Wang <cole945@gmail.com>
* linux-ppc-low.c (ppc_supports_z_point_type): New function:
(ppc_insert_point, ppc_remove_point): Insert/remove z-packet breakpoints.
(ppc64_emit_ops_vector): Add target ops - ppc_supports_z_point_type,
ppc_insert_point, ppc_remove_point.
opcodes/
2016-02-24 Renlin Li <renlin.li@arm.com>
* arm-dis.c (print_insn_coprocessor): Check co-processor number for
cpd/cpd2, mcr/mcr2, mrc/mrc2, ldc/ldc2, stc/stc2.
gas/
2016-02-24 Renlin Li <renlin.li@arm.com>
* testsuite/gas/arm/copro.s: Use coprocessor other than 10, 11.
* testsuite/gas/arm/copro.d: Update.
Since plt_got.offset may be updated in x86 allocate_dynrelocs, set
plt_got.offset to (bfd_vma) -1 when setting needs_plt to 0.
* elf32-i386.c (elf_i386_allocate_dynrelocs): Set plt_got.offset
to (bfd_vma) -1 when setting needs_plt to 0.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
This commit fixes an error in exec_file_locate_attach where
the main executable could be loaded from outside the sysroot
if a nonempty, non-"target:" sysroot was set but the discovered
executable filename did not exist in that sysroot and did exist
on the main filesystem.
gdb/ChangeLog:
* exec.c (exec_file_locate_attach): Do not attempt to
locate main executable locally if not found in sysroot.
gdb/testsuite/ChangeLog:
* gdb.base/attach-pie-noexec.exp: Do not expect an error
message on attach.
gdb/ChangeLog:
Extend "skip" command to support -file, -gfile, -function, -rfunction.
* NEWS: Document new features.
* skip.c: #include "fnmatch.h", "gdb_regex.h".
(skiplist_entry) <file>: Renamed from filename.
<function>: Renamed from function_name.
<file_is_glob, function_is_regexp>: New members.
<compiled_function_regexp, compiled_function_regexp_is_valid>:
New members.
(make_skip_entry): New function.
(free_skiplist_entry, free_skiplist_entry_cleanup): New functions.
(make_free_skiplist_entry_cleanup): New function.
(skip_file_command): Update.
(skip_function, skip_function_command): Update.
(compile_skip_regexp): New functions.
(skip_command): Add support for new options.
(skip_info): Update.
(skip_file_p, skip_gfile_p): New functions.
(skip_function_p, skip_rfunction_p): New functions.
(function_name_is_marked_for_skip): Update and simplify.
(_initialize_step_skip): Update.
* symtab.c: #include "fnmatch.h".
(compare_glob_filenames_for_search): New function.
* symtab.h (compare_glob_filenames_for_search): Declare.
* utils.c (count_path_elements): New function.
(strip_leading_path_elements): New function.
* utils.h (count_path_elements): Declare.
(strip_leading_path_elements): Declare.
gdb/doc/ChangeLog:
* gdb.texinfo (Skipping Over Functions and Files): Document new
options to "skip" command. Update docs of output of "info skip".
gdb/testsuite/ChangeLog:
* gdb.base/skip.c (test_skip): New function.
(end_test_skip_file_and_function): New function.
(test_skip_file_and_function): New function.
* gdb.base/skip1.c (test_skip): New function.
(skip1_test_skip_file_and_function): New function.
* gdb.base/skip.exp: Add tests for new skip options.
* gdb.base/skip-solib.exp: Update expected output.
* gdb.perf/skip-command.cc: New file.
* gdb.perf/skip-command.exp: New file.
* gdb.perf/skip-command.py: New file.
Linker assigned symbols should be made dynamic by default only when
creating shared object or relocatable executable.
bfd/
* elflink.c (bfd_elf_record_link_assignment): Check for shared
library, instead of PIC, and don't check PDE when making linker
assigned symbol dynamic.
ld/
* testsuite/ld-frv/fdpic-pie-6.d: Updated.
* testsuite/ld-mips-elf/pie-n32.d: Likewise.
* testsuite/ld-mips-elf/pie-n64.d: Likewise.
* testsuite/ld-mips-elf/pie-o32.d: Likewise.
This patch updates the syscalls in sync with syscalls/aarch64-linux.xml.
Some syscalls are still not supported by gdb/linux-record.c yet. Mark
them UNSUPPORTED_SYSCALL_MAP.
This patch fixes the following test fail,
Process record and replay target doesn't support syscall number 56^M
Process record: failed to record execution log.^M
^M
Program stopped.^M
0x00000020000e9dfc in open () from /lib/aarch64-linux-gnu/libc.so.6^M
(gdb) FAIL: gdb.reverse/fstatat-reverse.exp: continue to breakpoint: marker2
gdb:
2016-02-23 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c (enum aarch64_syscall) <aarch64_sys_mknod>:
Remove.
<aarch64_sys_mkdir, aarch64_sys_unlink, aarch64_sys_symlink>: Remove.
<aarch64_sys_link, aarch64_sys_rename, aarch64_sys_faccess>: Remove.
<aarch64_sys_mknodat, aarch64_sys_mkdirat>: New.
<aarch64_sys_unlinkat, aarch64_sys_symlinkat>: New.
<aarch64_sys_linkat, aarch64_sys_renameat, aarch64_sys_faccessat>: New.
<aarch64_sys_open, aarch64_sys_readlink, aarch64_sys_fstatat>: Remove.
<aarch64_sys_openat, aarch64_sys_readlinkat>: New.
<aarch64_sys_newfstatat>: New.
(UNSUPPORTED_SYSCALL_MAP): New macro.
(aarch64_canonicalize_syscall): Add missing syscalls.
We should always create the dynsym section, even if it is empty, with
dynamic sections.
* elflink.c (_bfd_elf_link_renumber_dynsyms): Always create the
dynsym section, even if it is empty, with dynamic sections.
unavailable.exp executes "info registers", expecting to find at least
two instances of "<unavailable>". However, it uses
"<unavailable>.*<unavailable>" as the pattern, which doesn't match
when the last register happens to be available (eg. PC). Change it
to ".*<unavailable>.*<unavailable>.*" instead.
Noticed on s390, no regression on x86_64.
gdb/testsuite/ChangeLog:
* gdb.trace/unavailable.exp (gdb_unavailable_registers_test_1): Fix
info registers pattern.
After building GDB
--with-python=/usr/bin/python3
and for example stripping ./gdb and running:
./gdb -data-directory data-directory/ -iex "add-auto-load-safe-path $PWD/gdb-gdb.gdb" -iex "add-auto-load-safe-path $PWD/gdb-gdb.
py" ./gdb
I get:
Make breakpoint pending on future shared library load? (y or [n]) [answered N; input not from terminal]
File "/home/jkratoch/redhat/gdb-test-python3/gdb/gdb-gdb.py", line 91
print "Warning: Cannot find enum type_flag_value type."
^
SyntaxError: Missing parentheses in call to 'print'
(top-gdb) q
gdb/ChangeLog
2016-02-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb-gdb.py (class TypeFlagsPrinter): Use parentheses for print.
