I noticed the existence of -Wsuggest-override and so this patch
enables it for gdb. It found a few spots that could use "override".
Also I went ahead and removed all uses of the "OVERRIDE" macro.
Using override is beneficial because it makes it harder to change a
base class and then forget to change a derived class.
Tested by the buildbot.
ChangeLog
2018-04-27 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* warning.m4 (AM_GDB_WARNINGS): Add -Wsuggest-override.
* dwarf2loc.c (class dwarf_evaluate_loc_desc): Use "override", not
"OVERRIDE".
(class symbol_needs_eval_context): Likewise.
* dwarf2read.c (mock_mapped_index::symbol_name_count)
(mock_mapped_index::symbol_name_at): Use "override". Remove
"virtual".
* dwarf2-frame.c (dwarf_expr_executor::get_addr_index): Use
"override".
(class dwarf_expr_executor): Use "override", not "OVERRIDE".
* aarch64-tdep.c (instruction_reader::read): Use "override".
(instruction_reader_test::read): Likewise.
* arm-tdep.c (instruction_reader::read): Use "override".
(instruction_reader_thumb::read): Likewise.
gdbserver/ChangeLog
2018-04-27 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
pseudo registers are either from raw registers or memory, so
gdbarch methods pseudo_register_read and pseudo_register_read_value
should have regcache object which only have read methods. In other
words, we should disallow writing to regcache in these two gdbarch
methods. In order to apply this restriction, this patch adds a new
class readable_regcache, derived from reg_buffer, and it only has
raw_read and cooked_read methods. regcache is derived from
readable_regcache. This patch also passes readable_regcache instead of
regcache to gdbarch methods pseudo_register_read and
pseudo_register_read_value.
This patch moves raw_read* and cooked_read* methods to readable_regcache,
which is straightforward. One thing not straightforward is that I split
regcache::xfer_part to readable_regcache::read_part and regcache::write_part,
because readable_regcache can only have methods to read.
readable_regcache is an abstract base class, and it has a pure virtual
function raw_update, because I don't want readable_regcache know where
these raw registers are from. They can be from either the target
(readwrite regcache) or the regcache itself (readonly regcache).
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_pseudo_register_read_value): Change
parameter type to 'readable_regcache *'.
* amd64-tdep.c (amd64_pseudo_register_read_value): Likewise.
* arm-tdep.c (arm_neon_quad_read): Likewise.
(arm_pseudo_read): Likewise.
* avr-tdep.c (avr_pseudo_register_read): Likewise.
* bfin-tdep.c (bfin_pseudo_register_read): Likewise.
* frv-tdep.c (frv_pseudo_register_read): Likewise.
* gdbarch.c: Re-generated.
* gdbarch.h: Re-generated.
* gdbarch.sh (pseudo_register_read): Change parameter type to
'readable_regcache *'.
(pseudo_register_read_value): Likewise.
* h8300-tdep.c (pseudo_from_raw_register): Likewise.
(h8300_pseudo_register_read): Likewise.
* hppa-tdep.c (hppa_pseudo_register_read): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_pseudo_register_read_into_value): Likewise.
(i386_pseudo_register_read_value): Likewise.
* i386-tdep.h (i386_pseudo_register_read_into_value): Update
declaration.
* ia64-tdep.c (ia64_pseudo_register_read): Likewise.
* m32c-tdep.c (m32c_raw_read): Likewise.
(m32c_read_flg): Likewise.
(m32c_banked_register): Likewise.
(m32c_banked_read): Likewise.
(m32c_sb_read): Likewise.
(m32c_part_read): Likewise.
(m32c_cat_read): Likewise.
(m32c_r3r2r1r0_read): Likewise.
(m32c_pseudo_register_read): Likewise.
* m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read): Likewise.
(mep_pseudo_cr64_read): Likewise.
(mep_pseudo_register_read): Likewise.
* mips-tdep.c (mips_pseudo_register_read): Likewise.
* msp430-tdep.c (msp430_pseudo_register_read): Likewise.
* nds32-tdep.c (nds32_pseudo_register_read): Likewise.
* regcache.c (regcache::raw_read): Move it to readable_regcache.
(regcache::cooked_read): Likewise.
(regcache::cooked_read_value): Likewise.
(regcache_cooked_read_signed):
(regcache::cooked_read): Likewise.
* regcache.h (readable_regcache): New class.
(regcache): Inherit readable_regcache. Move some methods to
readable_regcache.
* rl78-tdep.c (rl78_pseudo_register_read): Change
parameter type to 'readable_regcache *'.
* rs6000-tdep.c (do_regcache_raw_read): Remove.
(e500_pseudo_register_read): Change parameter type to
'readable_regcache *'.
(dfp_pseudo_register_read): Likewise.
(vsx_pseudo_register_read): Likewise.
(efpr_pseudo_register_read): Likewise.
* s390-tdep.c (s390_pseudo_register_read): Likewise.
* sh-tdep.c (sh_pseudo_register_read): Likewise.
* sh64-tdep.c (pseudo_register_read_portions): Likewise.
(sh64_pseudo_register_read): Likewise.
* sparc-tdep.c (sparc32_pseudo_register_read): Likewise.
* sparc64-tdep.c (sparc64_pseudo_register_read): Likewise.
* spu-tdep.c (spu_pseudo_register_read_spu): Likewise.
(spu_pseudo_register_read): Likewise.
* xtensa-tdep.c (xtensa_register_read_masked): Likewise.
(xtensa_pseudo_register_read): Likewise.
The patch later in this series will move regcache's raw_read and
cooked_read methods to a new class regcache_read, and regcache is
dervied from it. Also pass regcache_read instead of regcache to gdbarch
methods pseudo_register_read and pseudo_register_read_value. In order
to prepare for this change, this patch changes regcache_raw_read to
regcache->raw_read. On the other hand, since we are in C++, I prefer
using class method (regcache->raw_read).
gdb:
2018-01-22 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_pseudo_read_value): Call regcache
method raw_read instead of regcache_raw_read.
* amd64-tdep.c (amd64_pseudo_register_read_value): Likewise.
* arm-tdep.c (arm_neon_quad_read): Likewise.
* avr-tdep.c (avr_pseudo_register_read): Likewise.
* bfin-tdep.c (bfin_pseudo_register_read): Likewise.
* frv-tdep.c (frv_pseudo_register_read): Likewise.
* h8300-tdep.c (h8300_pseudo_register_read): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_pseudo_register_read_into_value): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read): Likewise.
* msp430-tdep.c (msp430_pseudo_register_read): Likewise.
* nds32-tdep.c (nds32_pseudo_register_read): Likewise.
* rl78-tdep.c (rl78_pseudo_register_read): Likewise.
* s390-linux-tdep.c (s390_pseudo_register_read): Likewise.
* sparc-tdep.c (sparc32_pseudo_register_read): Likewise.
* sparc64-tdep.c (sparc64_pseudo_register_read): Likewise.
* spu-tdep.c (spu_pseudo_register_read_spu): Likewise.
* xtensa-tdep.c (xtensa_pseudo_register_read): Likewise.
ARMv8 supports tagged address, that is, the top one byte in address
is ignored. It is always enabled on aarch64-linux. See
https://www.kernel.org/doc/Documentation/arm64/tagged-pointers.txt
The tag in the tagged address is modeled as non-significant bits in
address, so this patch adds a new gdbarch method significant_addr_bit and
clear the non-significant bits (the top byte in ARMv8) of the virtual
address at the point before passing address to target cache layer. IOW,
the address used in the target cache layer is already cleared.
Before this patch,
(gdb) x/x 0x0000000000411030
0x411030 <global>: 0x00000000
(gdb) x/x 0xf000000000411030
0xf000000000411030: Cannot access memory at address 0xf000000000411030
After this patch,
(gdb) x/x 0x0000000000411030
0x411030 <global>: 0x00000000
(gdb) x/x 0xf000000000411030
0xf000000000411030: 0x00000000
Note that I used address_significant in paddress, but it causes a
regression gdb.base/long_long.exp, because gdb clears the non-significant
bits in address, but test still expects them.
p/a val.oct^M
$24 = 0x2ee53977053977^M
(gdb) FAIL: gdb.base/long_long.exp: p/a val.oct
so I defer the change there.
gdb:
2017-12-08 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdbarch_init): Install gdbarch
significant_addr_bit.
* gdbarch.sh (significant_addr_bit): New.
* gdbarch.c, gdbarch.h: Re-generated.
* target.c (memory_xfer_partial): Call address_significant.
* utils.c (address_significant): New function.
* utils.h (address_significant): Declare.
2017-12-08 Yao Qi <yao.qi@linaro.org>
gdb/testsuite:
* gdb.arch/aarch64-tagged-pointer.c: New file.
* gdb.arch/aarch64-tagged-pointer.exp: New file.
displaced_step_closure is a type defined in multiple -tdep.c files.
Trying to xfree it from the common code (infrun.c) is a problem when we
try to poison xfree for non-POD types. Because there can be multiple of
these types in the same build, this patch makes a hierarchy of classes
with a virtual destructor. When the common code deletes the object
through a displaced_step_closure pointer, it will invoke the right
destructor.
The amd64 used a last-member array with a variable size. That doesn't
work with new, so I changed it for an std::vector. Other architectures
which used a simple byte buffer as a closure now use a shared
buf_displaced_step_closure, a closure type that only contains a
gdb::byte_vector.
Reg-tested on the buildbot.
gdb/ChangeLog:
* infrun.h: Include common/byte-vector.h.
(struct displaced_step_closure): New struct.
(struct buf_displaced_step_closure): New struct.
* infrun.c (displaced_step_closure::~displaced_step_closure):
Provide default implementation.
(displaced_step_clear): Deallocate step closure with delete.
* aarch64-tdep.c (displaced_step_closure): Rename to ...
(aarch64_displaced_step_closure): ... this, extend
displaced_step_closure.
(aarch64_displaced_step_data) <dsc>: Change type to
aarch64_displaced_step_closure.
(aarch64_displaced_step_copy_insn): Adjust to type change, use
unique_ptr.
(aarch64_displaced_step_fixup): Add cast for displaced step
closure.
* amd64-tdep.c (displaced_step_closure): Rename to ...
(amd64_displaced_step_closure): ... this, extend
displaced_step_closure.
<insn_buf>: Change type to std::vector<gdb_byte>.
<max_len>: Remove.
(fixup_riprel): Change type of DSC parameter, adjust to type
change of insn_buf.
(fixup_displaced_copy): Change type of DSC parameter.
(amd64_displaced_step_copy_insn): Instantiate
amd64_displaced_step_closure.
(amd64_displaced_step_fixup): Add cast for closure type, adjust
to type change of insn_buf.
* arm-linux-tdep.c (arm_linux_cleanup_svc): Change type of
parameter DSC.
(arm_linux_copy_svc): Likewise.
(cleanup_kernel_helper_return): Likewise.
(arm_catch_kernel_helper_return): Likewise.
(arm_linux_displaced_step_copy_insn): Instantiate
arm_displaced_step_closure.
* arm-tdep.c (arm_pc_is_thumb): Add cast for closure.
(displaced_read_reg): Change type of parameter DSC.
(branch_write_pc): Likewise.
(load_write_pc): Likewise.
(alu_write_pc): Likewise.
(displaced_write_reg): Likewise.
(arm_copy_unmodified): Likewise.
(thumb_copy_unmodified_32bit): Likewise.
(thumb_copy_unmodified_16bit): Likewise.
(cleanup_preload): Likewise.
(install_preload): Likewise.
(arm_copy_preload): Likewise.
(thumb2_copy_preload): Likewise.
(install_preload_reg): Likewise.
(arm_copy_preload_reg): Likewise.
(cleanup_copro_load_store): Likewise.
(install_copro_load_store): Likewise.
(arm_copy_copro_load_store) Likewise.
(thumb2_copy_copro_load_store): Likewise.
(cleanup_branch): Likewise.
(install_b_bl_blx): Likewise.
(arm_copy_b_bl_blx): Likewise.
(thumb2_copy_b_bl_blx): Likewise.
(thumb_copy_b): Likewise.
(install_bx_blx_reg): Likewise.
(arm_copy_bx_blx_reg): Likewise.
(thumb_copy_bx_blx_reg): Likewise.
(cleanup_alu_imm): Likewise.
(arm_copy_alu_imm): Likewise.
(thumb2_copy_alu_imm): Likewise.
(cleanup_alu_reg): Likewise.
(install_alu_reg): Likewise.
(arm_copy_alu_reg): Likewise.
(thumb_copy_alu_reg): Likewise.
(cleanup_alu_shifted_reg): Likewise.
(install_alu_shifted_reg): Likewise.
(arm_copy_alu_shifted_reg): Likewise.
(cleanup_load): Likewise.
(cleanup_store): Likewise.
(arm_copy_extra_ld_st): Likewise.
(install_load_store): Likewise.
(thumb2_copy_load_literal): Likewise.
(thumb2_copy_load_reg_imm): Likewise.
(arm_copy_ldr_str_ldrb_strb): Likewise.
(cleanup_block_load_all): Likewise.
(cleanup_block_store_pc): Likewise.
(cleanup_block_load_pc): Likewise.
(arm_copy_block_xfer): Likewise.
(thumb2_copy_block_xfer): Likewise.
(cleanup_svc): Likewise.
(install_svc): Likewise.
(arm_copy_svc): Likewise.
(thumb_copy_svc): Likewise.
(arm_copy_undef): Likewise.
(thumb_32bit_copy_undef): Likewise.
(arm_copy_unpred): Likewise.
(arm_decode_misc_memhint_neon): Likewise.
(arm_decode_unconditional): Likewise.
(arm_decode_miscellaneous): Likewise.
(arm_decode_dp_misc): Likewise.
(arm_decode_ld_st_word_ubyte): Likewise.
(arm_decode_media): Likewise.
(arm_decode_b_bl_ldmstm): Likewise.
(arm_decode_ext_reg_ld_st): Likewise.
(thumb2_decode_dp_shift_reg): Likewise.
(thumb2_decode_ext_reg_ld_st): Likewise.
(arm_decode_svc_copro): Likewise.
(thumb2_decode_svc_copro): Likewise.
(install_pc_relative): Likewise.
(thumb_copy_pc_relative_16bit): Likewise.
(thumb_decode_pc_relative_16bit): Likewise.
(thumb_copy_pc_relative_32bit): Likewise.
(thumb_copy_16bit_ldr_literal): Likewise.
(thumb_copy_cbnz_cbz): Likewise.
(thumb2_copy_table_branch): Likewise.
(cleanup_pop_pc_16bit_all): Likewise.
(thumb_copy_pop_pc_16bit): Likewise.
(thumb_process_displaced_16bit_insn): Likewise.
(decode_thumb_32bit_ld_mem_hints): Likewise.
(thumb_process_displaced_32bit_insn): Likewise.
(thumb_process_displaced_insn): Likewise.
(arm_process_displaced_insn): Likewise.
(arm_displaced_init_closure): Likewise.
(arm_displaced_step_fixup): Add cast for closure.
* arm-tdep.h: Include infrun.h.
(displaced_step_closure): Rename to ...
(arm_displaced_step_closure): ... this, extend
displaced_step_closure.
<u::svc::copy_svc_os>: Change type of parameter DSC.
<cleanup>: Likewise.
(arm_process_displaced_insn): Likewise.
(arm_displaced_init_closure): Likewise.
(displaced_read_reg): Likewise.
(displaced_write_reg): Likewise.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn):
Adjust.
* i386-tdep.h: Include infrun.h.
(i386_displaced_step_closure): New typedef.
* i386-tdep.c (i386_displaced_step_copy_insn): Use
i386_displaced_step_closure.
(i386_displaced_step_fixup): Adjust.
* rs6000-tdep.c (ppc_displaced_step_closure): New typedef.
(ppc_displaced_step_copy_insn): Use ppc_displaced_step_closure
and unique_ptr.
(ppc_displaced_step_fixup): Adjust.
* s390-linux-tdep.c (s390_displaced_step_closure): New typedef.
(s390_displaced_step_copy_insn): Use s390_displaced_step_closure
and unique_ptr.
(s390_displaced_step_fixup): Adjust.
This patch is an initial C++-ification of pv_area, from
prologue-value. It turns pv_area into a class with a constructor and
destructor; renames the data members; and changes various functions to
be member functions. This allows the removal of
make_cleanup_free_pv_area.
gdb/ChangeLog
2017-10-12 Tom Tromey <tom@tromey.com>
* s390-linux-tdep.c (s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue): Update.
* rx-tdep.c (check_for_saved, rx_analyze_prologue): Update.
* rl78-tdep.c (rl78_analyze_prologue, check_for_saved): Update.
* prologue-value.h (class pv_area): Move from prologue-value.c.
Change names of members. Add constructor, destructor, member
functions.
(make_pv_area, free_pv_area, make_cleanup_free_pv_area)
(pv_area_store, pv_area_fetch, pv_area_store_would_trash)
(pv_area_fetch, pv_area_scan): Don't declare.
* prologue-value.c (struct pv_area::area_entry): Now member of
pv_area.
(struct pv_area): Move to prologue-value.h.
(pv_area::pv_area): Rename from make_pv_area.
(pv_area::~pv_area): Rename from free_pv_area.
(do_free_pv_area_cleanup, make_cleanup_free_pv_area): Remove.
(clear_entries, find_entry, overlaps, store_would_trash, store)
(fetch, find_reg, scan): Now member of pv_area.
Remove "area" argument. Update.
* msp430-tdep.c (check_for_saved, msp430_analyze_prologue):
Update.
* mn10300-tdep.c (push_reg, check_for_saved)
(mn10300_analyze_prologue): Update.
* mep-tdep.c (is_arg_spill, check_for_saved)
(mep_analyze_prologue): Update.
* m32c-tdep.c (m32c_pv_push, m32c_srcdest_fetch)
(m32c_srcdest_store, m32c_pv_enter, m32c_is_arg_spill)
(m32c_is_struct_return, m32c_analyze_prologue): Update.
* arm-tdep.c (thumb_analyze_prologue, arm_analyze_prologue):
Update.
* arc-tdep.c (arc_is_in_prologue, arc_analyze_prologue): Update.
* aarch64-tdep.c (aarch64_analyze_prologue): Update.
As a first small step to getting rid of doublest.h, this patch removes the
include of "floatformat.h" in "doublest.h". This is actually not needed
for the file itself. A few source files now need to include "floatformat.h"
directly, since they got it indirectly via "doublest.h" and still need it.
In reviewing which files need it, I found a number of files that include
"floatformat.h" directly without actually needing it at all. Similarly,
a number of files include "doublest.h" without needing it. I've also
removed those unnecessary include statements.
gdb/ChangeLog:
2017-10-05 Ulrich Weigand <uweigand@de.ibm.com>
* doublest.h: Do not include "floatformat.h". Remove stale comments.
* gdbtypes.c: Include "floatformat.h".
* value.c: Likewise.
* m68k-tdep.c: Likewise.
* findvar.c: Do not include "floatformat.h".
* amd64-darwin-tdep.c: Likewise.
* arm-linux-tdep.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* m68k-linux-tdep.c: Likewise.
* mep-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* s390-linux-tdep.c: Likewise.
* sparc-obsd-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* vax-tdep.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-tdep.c: Likewise.
* top.c: Do not include "doublest.h".
* aarch64-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* arm-linux-tdep.c: Likewise.
* m68k-linux-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* xstormy16-tdep.c: Likewise.
With the growing number of selftests, I think it would be useful to be
able to run only a subset of the tests. This patch associates a name to
each registered selftest. It then allows doing something like:
(gdb) maintenance selftest aarch64
Running self-tests.
Running selftest aarch64-analyze-prologue.
Running selftest aarch64-process-record.
Ran 2 unit tests, 0 failed
or with gdbserver:
./gdbserver --selftest=aarch64
In both cases, only the tests that contain "aarch64" in their name are
ran. To help validate that the tests you want to run were actually ran,
it also prints a message with the test name before running each test.
Right now, all the arch-dependent tests are registered as a single test
of the selftests. To be able to filter those too, I made them
"first-class citizen" selftests. The selftest type is an interface,
with different implementations for "simple selftests" and "arch
selftests". The run_tests function simply iterates on that an invokes
operator() on each test.
I changed the tests data structure from a vector to a map, because
- it allows iterating in a stable (alphabetical) order
- it allows to easily verify if a test with a given name has been
registered, to avoid duplicates
There's also a new command "maintenance info selftests" that lists the
registered selftests.
gdb/ChangeLog:
* common/selftest.h (selftest): New struct/interface.
(register_test): Add name parameter, add new overload.
(run_tests): Add filter parameter.
(for_each_selftest_ftype): New typedef.
(for_each_selftest): New declaration.
* common/selftest.c (tests): Change type to
map<string, unique_ptr<selftest>>.
(simple_selftest): New struct.
(register_test): New function.
(register_test): Add name parameter and use it.
(run_tests): Add filter parameter and use it. Add prints.
Adjust to vector -> map change.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add names when
registering selftests.
* arm-tdep.c (_initialize_arm_tdep): Likewise.
* disasm-selftests.c (_initialize_disasm_selftests): Likewise.
* dwarf2-frame.c (_initialize_dwarf2_frame): Likewise.
* dwarf2loc.c (_initialize_dwarf2loc): Likewise.
* findvar.c (_initialize_findvar): Likewise.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Likewise.
* maint.c (maintenance_selftest): Update call to run_tests.
(maintenance_info_selftests): New function.
(_initialize_maint_cmds): Register "maintenance info selftests"
command. Update "maintenance selftest" doc.
* regcache.c (_initialize_regcache): Add names when registering
selftests.
* rust-exp.y (_initialize_rust_exp): Likewise.
* selftest-arch.c (gdbarch_selftest): New struct.
(gdbarch_tests): Remove.
(register_test_foreach_arch): Add name parameter. Call
register_test.
(tests_with_arch): Remove, move most content to
gdbarch_selftest::operator().
(_initialize_selftests_foreach_arch): Remove.
* selftest-arch.h (register_test_foreach_arch): Add name
parameter.
(run_tests_with_arch): New declaration.
* utils-selftests.c (_initialize_utils_selftests): Add names
when registering selftests.
* utils.c (_initialize_utils): Likewise.
* unittests/array-view-selftests.c
(_initialize_array_view_selftests): Likewise.
* unittests/environ-selftests.c (_initialize_environ_selftests):
Likewise.
* unittests/function-view-selftests.c
(_initialize_function_view_selftests): Likewise.
* unittests/offset-type-selftests.c
(_initialize_offset_type_selftests): Likewise.
* unittests/optional-selftests.c
(_initialize_optional_selftests): Likewise.
* unittests/scoped_restore-selftests.c
(_initialize_scoped_restore_selftests): Likewise.
* NEWS: Document "maintenance selftest" and "maint info
selftests".
gdb/gdbserver/ChangeLog:
* server.c (captured_main): Accept argument for --selftest.
Update run_tests call.
* linux-x86-tdesc-selftest.c (initialize_low_tdesc): Add names
when registering selftests.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Document filter parameter
of "maint selftest". Document "maint info selftests" command.
As an update to commit ede5f15146 ("gdbarch.h: Change
gdbarch_info::tdep_info's type to void *") replace the definition of the
`tdep_info' member in `struct gdbarch_info' with an anonymous union,
comprising the original member, with its type reverted to `struct
gdbarch_tdep_info *', a `tdesc_data' member of a `struct tdesc_arch_data
*' type and an `id' member of an `int *' type. Remove now unnecessary
casts throughout use places then, making code easier to read an less
prone to errors, which may happen with casting.
gdb/
* gdbarch.sh (gdbarch_info): Replace the `tdep_info' member with
a union of `tdep_info', `tdesc_data' and `id'.
* aarch64-tdep.c (aarch64_gdbarch_init): Use `info.tdesc_data'
rather than `info.tdep_info'.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* i386-tdep.c (i386_gdbarch_init): Likewise.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Use `info.id' rather than
`info.tdep_info'.
(ppc_linux_init_abi): Use `info.tdesc_data' rather than
`info.tdep_info'.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* spu-multiarch.c (spu_gdbarch): Use `info.id' rather than
`info.tdep_info'.
* spu-tdep.c (spu_gdbarch_init): Likewise.
* gdbarch.h: Regenerate.
This is a follow-up to
[PATCH 0/6] Unify the disassembler selection in gdb and objdump
https://sourceware.org/ml/binutils/2017-05/msg00192.html
that is, opcodes is able to select the right disassembler, so gdb
doesn't have to select them. Instead, gdb can just use
default_print_insn. As a result, these print_insn_XXX are not used
out of opcodes, so this patch also moves their declarations from
include/dis-asm.h to opcodes/disassemble.h. With this change,
GDB doesn't use any print_insn_XXX directly any more.
gdb:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdb_print_insn): Call
default_print_insn instead of print_insn_aarch64.
* arm-tdep.c (gdb_print_insn_arm): Call
default_print_insn instead of print_insn_big_arm
and print_insn_little_arm.
* i386-tdep.c (i386_print_insn): Call default_print_insn
instead of print_insn_i386.
* ia64-tdep.c (ia64_print_insn): Call
default_print_insn instead of print_insn_ia64.
* mips-tdep.c (gdb_print_insn_mips): Call
default_print_insn instead of print_insn_big_mips
and print_insn_little_mips.
* spu-tdep.c (gdb_print_insn_spu): Call default_print_insn
instead of print_insn_spu.
include:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
(print_insn_spu): Likewise.
opcodes:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c: Include disassemble.h instead of dis-asm.h.
* arm-dis.c: Likewise.
* ia64-dis.c: Likewise.
* mips-dis.c: Likewise.
* spu-dis.c: Likewise.
* disassemble.h (print_insn_aarch64): New declaration, moved from
include/dis-asm.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
The size of wchar_t on AArch64 and ARM is 4-byte, so we can use the
default value (4*TARGET_CHAR_BIT).
This patch fixes some fails in gdb.cp/wide_char_types.exp on
aarch64-linux.
gdb:
2017-04-25 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdbarch_init): Don't call
set_gdbarch_wchar_bit.
* arm-tdep.c (arm_gdbarch_init): Likewise.
gdb-8.0-branch
./configure --enable-werror --enable-targets=all
aarch64-tdep.c:3045:13: error: ‘void selftests::aarch64_process_record_test()’ declared ‘static’ but never defined [-Werror=unused-function]
arm-tdep.c:9601:13: error: ‘void selftests::arm_record_test()’ declared ‘static’ but never defined [-Werror=unused-function]
gdb/ChangeLog
2017-04-21 Jan Kratochvil <jan.kratochvil@redhat.com>
* aarch64-tdep.c (selftests::aarch64_process_record_test): Make it #if
GDB_SELF_TEST.
* arm-tdep.c (selftests::arm_record_test): Likewise.
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
This patch fixes the bug of handling PRFM instruction. PRFM is documented
in a table with other load and store instructions, but it doesn't do any
load or store. This patch also adds a unit test to PRFM instruction.
gdb:
2017-03-23 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_process_record_test): Declare.
(_initialize_aarch64_tdep): Register it.
(aarch64_record_load_store): Handle PRFM instruction.
(aarch64_process_record_test): New function.
Both aarch64-tdep.c and arm-tdep.c defines a class instruction_reader, which
violates ODR, but linker doesn't an emit error. I fix this issue by wrapping
them by anonymous namespace, but I think it is better to apply this for all
locally used classes.
If it is a good idea to put locally used class into anonymous namespace, we
should document this rule into GDB coding convention, or even GCC coding
convention. Note that anonymous namespace has been used in GCC but GCC
coding convention doesn't mention the it.
gdb:
2017-03-22 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c: Wrap locally used classes in anonymous
namespace.
* arm-tdep.c: Likewise.
* linespec.c: Likewise.
* ui-out.c: Likewise.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This patch change aarch prologue analyzer using code cache, in order
to improve the performance of remote debugging.
gdb.perf/skip-prologue.exp (measured by wall-time) is improved when
the program is compiled without debug information.
Original Patched Original Patched
without dbg without dbg with dbg with dbg
/ 11.1635239124 9.99472999573 9.65339517593 9.66648793221
-fstack-protector-all 11.2560930252 9.338118 9.63896489143 9.59474396706
gdb:
2016-12-9 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (instruction_reader::read): Call
read_code_unsigned_integer instead of
read_memory_unsigned_integer.
This patch teaches GDB AArch64 backend to recognize STR instructions
in prologue, like 'str x19, [sp, #-48]!' or 'str w0, [sp, #44]'.
The unit test is added too.
gdb:
2016-12-02 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_analyze_prologue): Recognize STR
instruction.
(aarch64_analyze_prologue_test): More tests.
We don't have an effective way to test prologue analyzer which is
highly dependent on instruction patterns in prologue generated by
compiler. GDB prologue analyzer may not handle the new sequences
generated by new compiler, or may still handle some sequences that
generated by very old compilers which are no longer used. The
former is a functionality issue, while the latter is a maintenance
issue.
The input and output of prologue analyzer is quite clear, so it
fits for unit test. The input is series of instructions, and the
output are 1) where prologue end, 2) where registers are saved.
In aarch64, they are represented in 'struct aarch64_prologue_cache'.
This patch refactors aarch64_analyze_prologue so it can read
instructions from either real target or test harness. In unit
test aarch64_analyze_prologue_test, aarch64_analyze_prologue gets
instructions we prepared in the test, as the input of prologue
analyzer. Then, we checked various fields in
'struct aarch64_prologue_cache'.
gdb:
2016-12-02 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c: Include "selftest.h".
(abstract_instruction_reader): New class.
(instruction_reader): New class.
(aarch64_analyze_prologue): Add new parameter reader. Call
reader.read instead of read_memory_unsigned_integer.
[GDB_SELF_TEST] (instruction_reader_test): New class.
(aarch64_analyze_prologue_test): New function.
(_initialize_aarch64_tdep) [GDB_SELF_TEST]: Register
selftests::aarch64_analyze_prologue_test.
* trad-frame.c (trad_frame_cache_zalloc):
(trad_frame_alloc_saved_regs): Add a new function.
* trad-frame.h (trad_frame_alloc_saved_regs): Declare.
Use regcache in software_single_step.
gdb:
2016-11-22 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_software_single_step): Call
get_regcache_arch instead of get_frame_arch. Call
regcache_read_pc instead of get_frame_pc.
Both of them are used in conversion. We can remove them since the
conversion is done.
There are many architectures only have one breakpoint instruction,
so their gdbarch methods breakpoint_kind_from_pc and
sw_breakpoint_from_kind look very similar. Instead of macro, we
use template "template <size_t, const gdb_byte *> struct bp_manipulation"
for these architectures. In order to use template, I also change
breakpoint instruction of type "static const gdb_byte[]" to
"constexpr gdb_byte[]", and rename them to ARCH_break_insn.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change it to
constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(aarch64_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* alpha-tdep.c (break_insn): Rename to alpha_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(alpha_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arc-tdep.c (arc_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation): New.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation_endian): New.
(BP_MANIPULATION): New.
(BP_MANIPULATION_ENDIAN): New.
* arm-tdep.c (arm_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* avr-tdep.c (avr_break_insn): Change it constexpr.
(avr_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cris-tdep.c (cris_gdbarch_init): Likewise.
* frv-tdep.c (breakpoint): Rename it to frv_break_insn, and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(frv_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* ft32-tdep.c (breakpoint): Rename it to ft32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(ft32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* h8300-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(h8300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* hppa-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(hppa_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* i386-tdep.c (break_insn): Rename it to i386_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(i386_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* iq2000-tdep.c (iq2000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* lm32-tdep.c (breakpoint): Rename it to lm32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(lm32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32c-tdep.c (break_insn): Rename it to m32c_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m32c_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* m68hc11-tdep.c (breakpoint): Rename it to m68hc11_break_insn and
change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68hc11_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m68k-tdep.c (break_insn): Rename it to m68k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m88k-tdep.c (break_insn): Rename it to m88k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m88k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mep-tdep.c (breakpoint): Rename it to mep_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(mep_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* microblaze-tdep.c (break_insn): Rename it to
microblaze_break_insn and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(microblaze_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (breakpoint): Rename it to mn10300_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(mn10300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* moxie-tdep.c (breakpoint): Rename it to moxie_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(moxie_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* msp430-tdep.c (breakpoint): Rename it to msp430_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(msp430_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* nds32-tdep.c (break_insn): Rename it to nds32_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(nds32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* rl78-tdep.c (breakpoint): Rename it to rl78_break_ins
and change its type to rl78_break_insn. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rl78_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rs6000-tdep.c (big_breakpoint): Change its type to
constexpr.
(little_breakpoint): Likewise.
Don't use GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN.
(rs6000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rx-tdep.c (breakpoint): Rename it to rx_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* s390-linux-tdep.c (breakpoint): Rename it to s390_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION
(s390_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* score-tdep.c (score_gdbarch_init): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* sparc-tdep.c (break_insn): Rename it to sparc_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(sparc32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* spu-tdep.c (breakpoint): Rename it to spu_break_insn and change
its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(spu_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* tilegx-tdep.c (breakpoint): Rename it to tilegx_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(tilegx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* vax-tdep.c (break_insn): Rename it to vax_break_insn and
change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(vax_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xstormy16-tdep.c (breakpoint): Rename it to
xstormy16_break_insn and change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(xstormy16_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
We don't track FP registers in aarch64 prologue analyzer, so this causes
an internal error when FP registers are saved by "stp" instruction in
prologue (stp d8, d9, [sp,#128]),
tbreak _Unwind_RaiseException^M
aarch64-tdep.c:335: internal-error: CORE_ADDR aarch64_analyze_prologue(gdbarch*, CORE_ADDR, CORE_ADDR, aarch64_prologue_cache*): Assertion `inst.operands[0].type == AARCH64_OPND_Rt' failed.^M
A problem internal to GDB has been detected,
This patch teaches GDB to track FP registers (D registers) in prologue
analyzer.
gdb:
2016-10-12 Yao Qi <yao.qi@linaro.org>
PR tdep/20682
* aarch64-tdep.c: Replace 32 with AARCH64_D_REGISTER_COUNT.
(aarch64_analyze_prologue): Extend array 'regs' for D registers.
Assert that operand 0 and 1 can be X or D registers. Update
register number for D registers. Update registers in frame
cache.
* aarch64-tdep.h (AARCH64_D_REGISTER_COUNT): New macro.
Nowadays, we only match pre-indexed STP in prologue. Due to the change
in gcc, https://gcc.gnu.org/ml/gcc-patches/2016-07/msg01933.html, it
may generate "STP with base register" in prologue, which GDB doesn't
handle. That is to say, previously GCC generates prologue like this,
sub sp, sp, #490
stp x29, x30, [sp, #-96]!
mov x29, sp
with the gcc patch above, GCC generates prologue like like this,
sub sp, sp, #4f0
stp x29, x30, [sp]
mov x29, sp
This patch is to teach GDB to recognize this instruction in prologue
analysis.
gdb:
2016-08-19 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_analyze_prologue): Handle register
based STP instruction.
In AArch64 displaced stepping and fast tracepoint, GDB/GDBserver needs
to check whether the offset can fit in the range. We are using int32_t
for offset, it is sufficient to get an offset from an instruction, but
it is not enough to get an offset from two addresses. For example,
we have a BL in shared lib which is at 0x0000002000040774, and the
scratch pad for displaced stepping is at 0x400698. The offset can't
fit in 28 bit imm. However, since we are using int32_t for offset, GDB
thinks the offset can fit it, and generate the B instruction with wrong
offset.
It fixes the following fail,
-FAIL: gdb.base/dso2dso.exp: next over call to sub2
gdb:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_displaced_step_b): Use int64_t for
variable new_offset.
gdb/gdbserver:
2016-06-28 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_ftrace_insn_reloc_b): Use int64_t
for variable new_offset.
(aarch64_ftrace_insn_reloc_b_cond): Likewise.
(aarch64_ftrace_insn_reloc_cb): Likewise.
(aarch64_ftrace_insn_reloc_tb): Likewise.
(aarch64_install_fast_tracepoint_jump_pad): Likewise. Use
PRIx64 instead of PRIx32.
Fixes, with x86_64-apple-darwin15-gcc (gcc 5.3.0):
.../src/gdb/aarch64-tdep.c: In function 'aarch64_record_load_store':
.../src/gdb/aarch64-tdep.c:3479:67: error: passing argument 3 of 'regcache_raw_read_unsigned' from incompatible pointer type [-Werror=incompatible-pointer-types]
bits (aarch64_insn_r->aarch64_insn, 16, 20), ®_rm_val);
^
In file included from .../src/gdb/regcache.h:23:0,
from .../src/gdb/gdbarch.h:69,
from .../src/gdb/defs.h:620,
from .../src/gdb/aarch64-tdep.c:21:
.../src/gdb/common/common-regcache.h:60:29: note: expected 'ULONGEST * {aka long unsigned int *}' but argument is of type 'uint64_t * {aka long long unsigned int *}'
extern enum register_status regcache_raw_read_unsigned
^
gdb/ChangeLog:
2016-04-20 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_record_load_store): Change type of
'reg_rm_val' local to ULONGEST.
core_addr_to_string_nz returns string which has "0x" prefix, so don't
need to print "0x" again. This patch is to remove the "0x".
gdb:
2016-02-15 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_analyze_prologue): Remove "0x".
Two small changes so everything builds with latest GCC and its
-Wmisleading-indentation.
In the aarch64-tdep.c case, the two misindented lines should actually be
part of the for loop. It looks like the indentation is all done using
spaces in that file though... I fixed it (changed for tabs + spaces) for
the lines I touched.
In the xcoffread.c case, we can simply remove the braces and fix the
indentation.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_record_asimd_load_store): Add braces
to for include additional lines.
* xcoffread.c (scan_xcoff_symtab): Remove unnecessary braces.
Hi,
AddressSanitizer reports an error like this,
(gdb) PASS: gdb.base/call-ar-st.exp: continue to tbreak9
print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
=================================================================
==6236==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x60200008eb50 at pc 0x89e432 bp 0x7fffa3df9080 sp 0x7fffa3df9078
READ of size 5 at 0x60200008eb50 thread T0
#0 0x89e431 in memory_xfer_partial gdb/target.c:1264
#1 0x89e6c7 in target_xfer_partial gdb/target.c:1320
#2 0x89f267 in target_write_partial gdb/target.c:1595^M
#3 0x8a014b in target_write_with_progress gdb/target.c:1889^M
#4 0x8a0262 in target_write gdb/target.c:1914^M
#5 0x89ee59 in target_write_memory gdb/target.c:1492^M
#6 0x9a1c74 in write_memory gdb/corefile.c:393^M
#7 0x467ea5 in aarch64_push_dummy_call gdb/aarch64-tdep.c:1388
The problem is that an instance of stack_item_t is created to adjust
stack for alignment, the item.len is correct, but item.data is buf,
which is wrong, because item.len can be greater than the length of
buf. This patch sets item.data to NULL, and only update sp (no
inferior memory writes on stack for this item).
gdb:
2015-12-17 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (struct stack_item_t): Update comments.
(pass_on_stack): Set item.data to NULL.
(aarch64_push_dummy_call): Call write_memory if si->data
isn't NULL.
AArch64 AAPCS defined HFA (homogeneous floating-point aggregate)
and HVF (homogeneous short vector aggregate), bug GDB only handles the
former. In the AAPCS doc, both types are treated exactly the same
in terms of alignment and passing locations (on registers or stack).
This patch is to extend is_hfa to handle both HFA and HVA.
gdb:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (is_hfa): Rename to ...
(is_hfa_or_hva): ... this. Handle vector type. All callers
updated.
(aarch64_extract_return_value): Update debugging message.
(aarch64_store_return_value): Likewise.
(aarch64_return_in_memory): Update comments.
As defined in AArch64 AAPCS, short vectors are passed through V
registers, and its maximum alignment is 16-byte. This patch is
to reflect these rules in GDB. This patch fixes some fails in
gdb.base/gnu_vector.exp.
gdb:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_type_align): For vector type, return
its length, but with the maximum of 16 bytes.
(is_hfa): Return zero for vector type.
(aarch64_push_dummy_call): Handle short vectors.
(aarch64_extract_return_value): Likewise.
(aarch64_store_return_value): Likewise.
Hi,
I build GDB with -fsanitize=address, and run testsuite. In
gdb.base/callfuncs.exp, I see the following error,
p t_float_values(0.0,0.0)
=================================================================
==8088==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000cb650 at pc 0x6e195c bp 0x7fff164f9770 sp 0x7fff164f9768
READ of size 16 at 0x6020000cb650 thread T0^
#0 0x6e195b in regcache_raw_write /home/yao/SourceCode/gnu/gdb/git/gdb/regcache.c:912
#1 0x6e1e52 in regcache_cooked_write /home/yao/SourceCode/gnu/gdb/git/gdb/regcache.c:945
#2 0x466d69 in pass_in_v /home/yao/SourceCode/gnu/gdb/git/gdb/aarch64-tdep.c:1101
#3 0x467512 in pass_in_v_or_stack /home/yao/SourceCode/gnu/gdb/git/gdb/aarch64-tdep.c:1196
#4 0x467d7d in aarch64_push_dummy_call /home/yao/SourceCode/gnu/gdb/git/gdb/aarch64-tdep.c:1335
The code in pass_in_v read contents from V registers (128 bit), but the
data passed through V registers can be less than 128 bit. In this case,
float is passed. So writing V registers contents into contents buff
will cause overflow. In this patch, we add an array reg[V_REGISTER_SIZE],
which is to hold the contents from V registers, and then copy useful
bits to buf.
gdb:
2015-11-18 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (pass_in_v): Add argument len. Add local array
reg. Callers updated.
Tom Tromey
Yao Qi
Joel Brobecker
Alan Hayward
Simon Marchi
Ulrich Weigand
Simon Marchi
John Baldwin
Maciej W. Rozycki
Jan Kratochvil
Pedro Alves
Artemiy Volkov
Trevor Saunders