(CHECKFLAGS): Remove.
(site.exp): New target.
(check): Rewrite to invoke runtest directly, rather than recurring
down into testsuite.
(clean-here): Remove testsuite directory.
(clean, distclean): Don't recur into testsuite.
* configure.in: Don't call AC_CONFIG_SUBDIRS(testsuite).
* configure: Rebuild.
* configure.in: Consistently use ${target_cpu_type} rather than
${cpu_type} after the loop.
* configure: Rebuild.
* Makefile.in (targ-cpu.o): Use @target_cpu_type@ rather than
@cpu_type@.
including support for Motorola syntax.
* config/m68k-parse.h: New file; definitions shared between
m68k-parse.y and tc-m68k.c.
* config/tc-m68k.c: Include m68k-parse.h.
(enum operand_type): Move to m68k-parse.h, where it is named
m68k_operand_type. Rename all uses. Rearrange somewhat. Add
FPREG. Rename AOFF to DISP. Rename AINDX to BASE. Rename APODX
to POST. Rename APRDX to PRE. Remove AMIND. Rename MSCR to
CONTROL. Remove DINDR.
(struct m68k_exp): Move to m68k-parse.h. Remove e_beg, e_end and
e_seg fields. Rename e_exp to exp. Rename e_siz to size, and
change type to enum m68k_size. Change all uses.
(enum _register): Move to m68k-parse.h, where it is named
m68k_register. Rename all uses. Add ZDATA0-7 and ZADDR0-7.
(struct m68k_op): Move to m68k-parse.h. Change all fields.
(seg): Don't define.
(add_exp): Remove.
(FAIL, OK): Remove.
(m68k_reg_parse): Move to m68k-parse.y, and rewrite.
(SKIP_WHITE, SKIP_W): Remove.
(try_moto_index, try_index): Remove.
(m68k_ip_op): Move to m68k-parse.y, and rewrite to use grammar.
(main): Remove obsolete test function.
(m68k_ip): Extensive changes to use new grammar.
(get_regs): Remove.
(crack_operand): m68k_ip_op now returns 0 on success.
(init_table): Add ssp, zd0-7 and za0-7.
(md_assemble): Make er const. Correct loop over operands when
looking for error message.
(md_begin): Set alt_notend_table for '(' and '@'.
(get_num): Expression is already parsed. Don't set seg.
* configure.in: If cpu_type is m68k, put m68k-parse.o in
extra-objects.
* configure: Rebuild.
* Makefile.in (DISTSTUFF): Add m68k-parse.c.
(BISON): Use ../bison/bison if it exists.
(BISONFLAGS): Define as empty.
(TARG_CPU_DEP_m68k): Depend upon $(srcdir)/config/m68k-parse.h.
(m68k-parse.c, m68k-parse.o): New targets.
* configure.in: Put AC_DEFINE(sparcv9) on its own line, so that the shell
variable settings associated with it are permanent. For CPUs requiring
bfd_gas=yes, select it based on CPU only, not individual target names. Handle
m68k-hp-hpux*, not just -hpux.
* config/tc-z8k.c (tc_coff_symbol_emit_hook): Add dummy argument to match
prototype in obj-coff.h.
* configure.in: Skip tests for defining WANT_FOPEN_BIN and IBM_COMPILER_SUX.
* acconfig.h: Deleted them.
* configure, conf.in: Rebuild with autoconf 2.0.
* config/go32.cfg, config/vms-conf.h: Updated.
* config/tc-m68k.c (md_apply_fix_2, md_convert_frag_1): Always use
IBM_COMPILER_SUX version of code, with comments indicating why.
* listing.c (file_info): Use text mode when opening file for read. Use "r"
directly, no macro.
* input-file.c (input_file_open): Don't use FOPEN_RT, just use "r".
* read.c (s_include): Ditto.
* output-file.c (output_file_create): Try both "wb" and "w", don't bother with
FOPEN_* macros.
* as.h: Don't include fopen-*.h.
* config/alpha-opcode.h: Make "ret" with no operands equivalent to "ret
zero,(ra)", to match OSF1 and to be consistent with both one-operand forms.
Patches from DJ Delorie:
* as.h (alloca): undef alloca before defining it just in case
* config/go32.cfg: new file for autoconf values
* config/te-go32.h: new file
* configure.bat: new for autoconf
* config/tc-i386.c (md_assemble): Fix typo in GOTPC check; had = for ==.
* configure.in: If target_frag doesn't exist, use /dev/null.
* as.c (parse_args): For non-VMS systems, re-add `v' to std_shortopts. Add
"verbose" to list of long options.
* write.c (adjust_reloc_syms): When generating an absolute section symbol as a
placeholder, don't mark it as used in a relocation entry, here.
* Makefile.in (comparison): Compare using makefile code from gcc, stripped down
to discard subdir stuff and adapted to give a non-zero exit status if either
file differs.
handling of program_transform_name.
* configure.in: Test for "unlink" and "delete", define USE_DELETE_FOR_UNLINK if
only the latter is found. Not expected to be triggered on UNIX/POSIX systems.
* acconfig.h (USE_DELETE_FOR_UNLINK): Undef here, provide comments.
Update for autoconf 1.118:
* gdbinit.in: New file, created from old .gdbinit.
* .gdbinit: Deleted.
* aclocal.m4 (GAS_GDBINIT): Deleted.
* configure.in: Don't use it. Instead, generate .gdbinit from gdbinit.in.
Don't substitute cpu_type, obj_format, emulation, atof. Switched order of
AC_LINK_FILES arguments. Use AC_PREREQ to ensure that older versions of
autoconf aren't used.
* Makefile.in: Added @configure_input@ line.
(configure): Deleted rule.
[regenerated conf.in, configure]
* aclocal.m4 (GAS_CHECK_DECL_NEEDED, GAS_WORKING_ASSERT): New macros.
* configure.in: Use them. Use AC_ARG_PROGRAM (now provided by autoconf)
instead of my hacked-up AC_PROGRAM_TRANSFORM_NAME. Move test for CROSS_COMPILE
just before AC_FUNC_ALLOCA, and emit a message to try to ease confusion about
autoconf's "cross-compiling" message.
* acconfig.h (NEED_DECLARATION_MALLOC, NEED_DECLARATION_FREE,
NEED_DECLARATION_ERRNO): Renamed from NEED_*_DECLARATION.
* configure, conf.in: Regenerated.
* aclocal.m4 (AC_OUTPUT_LINKS): Deleted redefinition, since autoconf 1.109 has
this fixed.
* configure.in: Don't change quote characters around AC_MSG_ERROR invocation.
Don't use AC_HEADER_STDC, since it requires running a program. Cache
NEED_*_DECLARATION values.
* configure, conf.in: Regenerated with a modified autoconf 1.109.
* acconfig.h, aclocal.m4: New files.
* configure.in: Rewritten (except for some target-specific code) for autoconf.
* conf.in, configure: New files, generated from the above.
* Makefile.in: Changed magic sequence indicating insertion of makefile
fragments.
(VPATH, srcdir, CC, LIBS, OBJS dependencies): Use @-substitutions from
configure.
(LINKED_HEADERS): Deleted a.out.gnu.h, a.out.h, and host.h.
(config.status, configure): Rewrite rules.
(config-stamp): Depend on conf. Skip variables that configure is now
substituting itself.
(*.o dependencies): Deleted host.h.
(distclean, realclean): Don't delete host.h.
* as.c: Don't include stdio.h, string.h, sys/types.h. Include signal.h after
as.h.
* as.h: Include alloca-conf.h first. Include ctype.h, string.h, strings.h,
stdlib.h, unistd.h, sys/types.h, fopen-bin.h, fopen-same.h, as suggested by
autoconf test results.
[BROKEN_ASSERT]: Don't include assert.h.
(strdup): Declare.
(volatile, const): Define if not __STDC__ and not already defined.
(malloc, realloc) [NEED_MALLOC_DECLARATION]: Declare.
(free) [NEED_FREE_DECLARATION]: Declare.
* gasp.c: Include config.h, stdlib.h (if HAVE_STDLIB_H). Don't include host.h.
(malloc) [NEED_MALLOC_DECLARATION]: Declare.
* messages.c: Include as.h first. Include errno.h only if HAVE_ERRNO_H. If
HAVE_VARARGS_H and not __STDC__, undefine HAVE_STDARG_H. Set NO_STDARG and
NO_VARARGS as appropriate.
* doc/Makefile.in (srcdir, INSTALL, INSTALL_PROGRAM, INSTALL_DATA): Use
autoconf @-substitutions.
with native MIPS assembler.
* configure.in (mips-*-irix*): Don't set emulation.
* config/te-irix.h: Remove.
With these changes, gas works with mips-tfile.
* configure.in: Set ALL_OBJ_DEPS in output Makefile.
Based on suggestions from <BAILEY@hmivax.humgen.upenn.edu> (Charles Bailey):
* vmsconf.sh: In generated file, get ".obj" suffix right, build source files
from other directories into objects in the current directory, and specify PSECT
attributes explicitly to linker. Also added missing label.
* Makefile.in (stamp-mk.com): Reference new variable VMS_OTHER_OBJS for list of
non-local object files, instead of listing them here.
(VMS_OTHER_OBJS): New variable, added more libiberty files.
* make-gas.com: Regenerated.
* config/ho-vms.h (unlink): Define as delete.
* config-gas.com: Fix quoting on TARGET_CANONICAL definition. Delete files
before creating them.
BFD_ASSEMBLER; I think all such targets that are supported will be matched by
real CPU-OS combinations earlier in the case statement.
(targets *-*-coff*, *-sysv*, *-*-sco*, *-*-sysv32): Deleted. Made some
comments about the dpx2 configuration, but left it disabled, since it couldn't
be reached before.
(target a29k-amd-ebmonold): Deleted.
ic960coff.
* config/ic960coff.mt: New file.
* config/obj-coffbfd.h [TC_I960]: Include coff/i960.h.
(TARGET_FORMAT) [TC_I960]: Use coff-Intel-little.
* config/te-ic960.h (CROSS_COMPILE): Don't undef this. We'll always build
little-endian object files.
* config/tc-i960.c (md_reloc_size): Don't define at all if BFD or
BFD_ASSEMBLER is defined.
(mem_fmt): Since COFF doesn't handle callx relocations yet, treat them like
normal 32-bit relocations.
(md_apply_fix): For callx relocations, store zero.
(tc_bout_fix_to_chars): Store symbol idx for all callx relocations, regardless
of link-relax setting.
(tc_coff_fix2rtype, tc_coff_sizemachdep): New functions.
(i960_handle_align) [! OBJ_BOUT]: If link-relax option is selected, print an
error message and clear it.
* config/tc-i960.h (BFD_ARCH, COFF_FLAGS, COFF_MAGIC, TC_COUNT_RELOC,
TC_COFF_FIX2RTYPE, TC_COFF_SIZEMACHDEP, tc_fix_adjustable): New macros.
(tc_coff_fix2rtype, tc_coff_sizemachdep): Declare.
* configure.in: If cpu is powerpc*, use ppc.
(ppc-*-sysv4*): Use object format elf.
* config/tc-ppc.h: Only declare a number of things if OBJ_COFF is
defined.
(TARGET_ARCH): Make it call ppc_arch.
(ppc_arch): Declare.
(TARGET_FORMAT): Set based on OBJ_COFF or OBJ_ELF.
(NO_STRING_ESCAPES): Define.
(LOCAL_LABEL, FAKE_LABEL_NAME): Define for OBJ_ELF.
* config/tc-ppc.c: Only define a number of functions of OBJ_COFF
is defined.
(md_pseudo_table): Most pseudo-ops are OBJ_COFF specific. Added
OBJ_COFF specific "bi" and "ei".
(md_parse_option): Fix handling of -u. Make -m601 set
PPC_OPCODE_601. If OBJ_ELF, accept -V and -Q.
(ppc_set_cpu): New function.
(ppc_arch): New function.
(md_begin): Call ppc_set_cpu.
(ppc_insert_operand): For a signed operand accept an unsigned
value, for IBM compatibility.
(ppc_byte): Don't call stringer for strings; instead, treat two
double quotes as a single double quote.
(ppc_comm): Set sy_tc.output for a .lcomm symbol.
(ppc_biei): New function.
(ppc_tc): If not OBJ_COFF, ignore first argument.
(ppc_fix_adjustable): Call as_bad_where, not as_bad.
(ppc_is_toc_sym): New function.
(md_apply_fix): Use ppc_is_toc_sym. Handle BFD_RELOC_16 and
BFD_RELOC_8.
(i386-*-netbsd0.8): New target, like 386bsd.
* configure.in: Set BFDDEF in Makefile to "define" or "undef".
* Makefile.in (config.h): Protect against multiple inclusions. Define or undef
BFD_ASSEMBLER as specified by $(BFDDEF).
(ALL_CFLAGS): Omit $(BFDDEF).
Ian Lance Taylor
Fred Fish
Steve Chamberlain
Ken Raeburn
Michael Meissner
Jeff Law
Michael Tiemann
J.T. Conklin