* monitor.c: Turn on caching.
(monitor_printf): If a ^C was sent, don't expect to see its
echo.
(monitor_open): Enable caching.
(monitor_resume, monitor_load): Flush cache.
(monitor_xfer_memory): Call cache routine.
(monitor_dump_regs): New.
(monitor_fetch_registers): If monitor_dump_regs available
then use it.
(monitor_load): Don't ref exec_bfd if it's NULL.
(monitor_load_srec): Use new monitor_make_srec calling convention.
(monitor_make_srec): Rewrite to cope with two, three and four byte
addresses.
* remote-hms.c (hms_cmds): Initialze end-of-command delim.
* dcache.h, dcache.h: Rewritten.
* remote.c: Reenable caching.
(getpkt): Reduce MAX_TRIES to 3.
(remote_xfer_memory): Use dcache_xfer_memory.
* defs.h (error_hook): New.
* top.c (error_hook): New definition.
* utils.c (error): Use error_hook if initialized.
* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
HAVE_SOCKETS in place of #ifndef GO32.
error message to work with pre-ansi compilers.
(monitor_load_srec): reduced length of s-records from 128 to 32
bytes so download is more reliable with the rom68k monitor.
* rom68k-rom.c: Added trailing space to prompt string.
* config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
* config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
Removed.
* defs.h, config/{xm-lynx.h, xm-nbsd.h},
config/i386/{xm-i386bsd.h, xm-linux.h},
config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
(PSIGNAL_IN_SIGNAL_H): Removed.
consistency with error_begin. Also print warning_pre_print.
Document it better.
* utils.c (warning): Use it.
* utils.c (error_begin): Doc fix.
* rs6000-nat.c (vmap_ldinfo): If symfile_objfile is not part of
any vmap, nuke it.
* breakpoint.h (disable_breakpoint, enable_breakpoint):
New declarations.
(enum bpdisp): Change name of 'delete' member to 'del'.
(struct bpstat): Changed name to 'bpstats'.
* breakpoint.c (disable_breakpoint, enable_breakpoint,
breakpoint_chain): Made globally visible.
(bpstat_stop_status): Use new name for bpstat.
(break_command_1, watch_command_1, catch_command_1,
breakpoint_auto_delete, denable_delete_breakpoint): Use 'del'
instead of 'delete'.
(set_breakpoint_sal): New function.
* defs.h (registers_changed_hook): New declaration.
* infcmd.c (run_stack_dummy): 'delete' is now 'del'.
* inflow.c (new_tty): Treat WIN32 in same way as __GO32__
* main.c (main): Don't scan options when in WIN32 and exit
without entering main loop.
* m2-exp.y (m2_elx): Member 'class' is now 'aclass'.
* symtab.h (struct symbol, struct partial_symbol): Changed name of
member 'class' to 'aclass'.
(SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change.
* top.c (registers_changed_hook): New definition.
* utils.c (quit, notice_quit, initialize_utils): Treate WIN32
in same way as __GO32__.
* value.h (c_typedef_print): Rename 'new' argument.
* core.c (dis_asm_read_memory): Add call to
dis_asm_read_memory_hook to provide alternate way for disassembler
to read memory.
* defs.h: Protect from multiple inclusion. Add decl for
dis_asm_read_memory_hook.
* gdbtk.c (finish_saving_output): Don't do anything if not saving
output.
* (breakpoint_notify): Don't send null filename to tcl.
* (gdb_eval): New tcl command to eval an expression.
* (gdb_disassemble): New tcl command to do disassembly. This
allows tcl code to choose between exec file and target memeory,
and can also do mixed source and assembly.
* (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure
that more of the environment is set up. Also, create link between
gdb and tcl vars disassemble{-_}from{-_}exec.
* gdbtk.tcl: New expression window support.
* Make assembly window be 80 columns wide.
* Use new disassembly method. Add menu items to select
disassembly from exec file or target.
* Change View menubar item to Options.
* Get rid of Stack, Breakpoints, Signals, and Variables Windows,
since they don't exist yet.
* Pop up a copyright window on startup.
* top.c: Make window startup be the default.
* Add dis_asm_read_memory_hook.
to fputs_unfiltered_hook. Differentiate stdout from stderr when
passing text into tcl land.
* defs.h, top.c, utils.c (error): Add error_hook.
* gdbtk.c: Improve mechanism for capturing output values.
* (full_filename): Remove.
* (gdb_cmd call_wrapper gdbtk_init): Protect all calls from tcl
land with call_wrapper. This prevents longjmps (usually via
error()) from jumping out of tcl/tk and leaving things in an
indeterminate state.
* gdbtk.tcl: New view option to disable line numbers. Put catch
around most uses of gdb_cmd. Add update button to reg config
window. Stop doing immediate updates when selecting registers.
Change register view values into checkbuttons.
target_wait_hook to allow GUI to handle blocking for inferior. Call
call_command_hook in execute_command to provide means for wrapping
commands with GUI state change updates.
* gdbtk.c (gdb_cmd): Force GUI into idle mode when errors occur.
* (gdb_stop): New tcl command to stop the target process.
* (x_event, gdbtk_wait): Allow GUI to interrupt gdb out of target
waits.
* (gdbtk_call_command): Wrapper around command processing to
alert GUI of target state changes.
* (gdbtk_init): Get the fd of X server for doing async
notification of X events (via x_event). Setup new hooks.
* gdbtk.tcl: Add scrollbars to assembly and command windows.
* Change window foreground & background colors.
* Create margin tag for breakpoints in source and assembly windows.
* Add new routines to be invoked when target state changes to/from
idle.
* Add start of expression window.
* Change bindings of mouse button 1 in assembly and source window
to just set or clear breakpoints when in the margin tag.
* Change shape of register window to be more vertical to better
reflect it's contents.
* Add stop button.
* Cleanup some code around command window bindings.
* infrun.c (wait_for_inferior): Make sure
through_sigtramp_breakpoint is non-null before deleting.
Also, add decl for symtab_to_filename.
* gdbtk.c: Replace calls to full_filename with symtab_to_filename.
* gdbtk.tcl: New routine pc_to_line replaces in line code. New
routine decr replaces in line code.
* (create_file_win): Use catch to handle open failures more
elegantly. Also, create special window to display file open
failure message. Move opening of file prior to creation of text
widget.
* (create_asm_win): Add PC as argument. We now base disassembly
on PC instead of function name, since function names can be
ambiguous (usually seen with shared libs). Also, use catch to
simplify code where we don't care about failures.
* source.c (symtab_to_filename): New. Returns the file
associated with a symtab.
* top.c: Define interactive_hook. Called during QUIT to animate
the GUI.
for describing the command and control types.
(struct command_line): Add new fields to keep track of the command
type and body associated with the command.
* top.c: Include value.h. Delete whitespace at the end of lines.
(build_command_line, get_command_line): New functions.
(execute_control_command, while_command, if_command): Likewise.
(realloc_body_list, read_next_line): Likewise.
(recurse_read_control_structure): Likewise.
(execute_user_command): Call execute_control_command.
(read_command_lines): Simplify by calling read_next_line, call
read_control_structure for "if" and "while" commands.
(free_command_lines): Free new fields in the command structure.
(define_command): Reset control_level to zero.
(init_main): Install command handlers for "if" and "while" commands.
(NORETURN): Define as "volatile" only for older GCCs.
(ATTR_NORETURN): Define for newer GCCs.
* procfs.c (proc_init_filed): Add ATTR_NORETURN to declaration.
--enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
where appropriate.
* General hackery to support alternate user-interface.
* breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
disable_breakpoint): Call hooks for alternate user-interface.
* defs.h: Add declarations for alternate user-interface hooks.
* main.c (main): Add --nw (and --nowindows) options to disable
the GUI.
* (near call to command_loop): Call command_loop_hook if set.
* (fputs_unfiltered): Call fputs_unfiltered_hook if set.
* stack.c: Call print_frame_info_listing_hook if set.
* top.c (gdb_init): Initialize targets.c and utils.c prior to
other files to make sure that calls to error and warning will
work. Call init_ui_hook after everything else.
* utils.c (query): Call query_hook if set.
* (gdb_flush): Call flush_hook if set.
* Change _initialize_utils to initialize_utils cuz we don't use
automatic initialization of utils.c anymore.
* Support for TK GUI.
* Makefile.in: Add rule for gdbtk.o.
* configure.in: Add support for --enable-gdbtk.
* gdbtk.c: New file. Contains support routines for TK interface.
* gdbtk.tcl: New file. Implements GUI policy.
* remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer
necessary.
(quit): Print annotation before printing the error message.
* main.c (return_to_top_level): Print annotation before doing the
longjmp.
* symtab.c (decode_line_1): Call error not warning and then
return_to_top_level. Call error_begin and printf_unfiltered
rather calling warning (before calls to return_to_top_level).
* core.c (memory_error): Use error_begin, printf_unfiltered,
print_address_numeric and return_to_top_level instead of error.
Cleans up a FIXME-32x64.
* language.c (type_error, range_error): Call error_begin
not just target_terminal_ours.
target null pointer.
* blockframe.c (find_frame_addr_in_frame_chain): Likewise.
* printcmd.c (output_command): Annotate things we print here too.
* Move declaration of print_value_flags from defs.h to value.h.
* main.c (command_line_input): Call wrap_here as well as gdb_flush.
that we print.
(print_frame_args): Annotate each argument.
* printcmd.c, defs.h (print_value_flags): New function.
* cp-valprint.c (cp_print_value_fields): Annotate each field.
* valprint.c (val_print_array_elements): Annotate each array element.
the same as --annotate=1.
(command_line_input): Print annotatation before and after prompt.
* blockframe.c (flush_cached_frames): Print annotation.
* Rename frame_file_full_name to annotation_level and move it from
symtab.h to defs.h.
* source.c (identify_source_line): If annotation_level > 1,
change output format.
* breakpoint.c: Print annotation whenever a breakpoint changes.
* main.c: New variable server_command.
(command_line_input): Parse "server " and set server_command.
(dont_repeat): Check server_command.
various miscellaneous things discovered in the process:
* printcmd.c, defs.h (print_address_numeric): New function.
* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
Use it.
* utils.c, defs.h (gdb_print_address): New function.
* expprint (dump_expression), gdbtypes.h: Use it.
* breakpoint.c (describe_other_breakpoints),
symmisc.c (dump_symtab, print_symbol):
Use filtered not unfiltered I/O.
(remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
just run gdb under a debugger for this (and it had problems with
printing addresses, how to print b->shadow, etc.).
* buildsym.c (make_blockvector), core.c (memory_error),
exec.c (print_section_info), maint.c (print_section_table),
mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Add comments saying code is broken. Marked with "FIXME-32x64".
* dbxread.c (process_one_symbol), partial-stab.h (default),
remote-vx.c (vx_run_files_info):
Don't cast int being passed to local_hex_string.
* symmisc.c (print_symbol): Don't cast long being passed to %lx.
* symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
only being a long.
* symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
and LOC_LOCAL.
* printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
* source.c: Include <sys/types.h> regardless of USG.
The old way (using #undef in tm.h) was ugly and asking for
trouble, because it makes it possible for some file to use the
wrong definition. Move definition of HOST_CHAR_BIT after definition
of TARGET_CHAR_BIT.
* config/alpha/tm-alpha.h, config/h8300/tm-h8300.h,
config/h8500/tm-h8500.h, config/z8k/tm-z8k.h: Don't undef TARGET_*_BIT
before defining them.
Some of the following is in #ifdef CALL_DUMMY_BREAKPOINT_OFFSET.
* breakpoint.h (enum bptype): Add bp_call_dummy.
(struct bpstat_what): Add call_dummy field.
* infrun.c (wait_for_inferior): Deal with it.
* breakpoint.c (bpstat_what): Deal with call dummy breakpoint.
* infcmd.c (run_stack_dummy): Set the call dummy breakpoint.
* config/sparc/tm-sparc.h: Define CALL_DUMMY_BREAKPOINT_OFFSET.
* defs.h (memcmp): Add decl for memcmp to #ifndef MEM_FNS_DECLARED.
* findvar.c (write_register): See if we are writing back the same
value that's already in the register. If so, don't bother.
* remote.c (putpkt, getpkt): Improve handling of communication
problems.
* ser-go32.c: Prototype it to death. Update serial_ops and add
dummy routines where appropriate.
* ser-tcp.c: New module to implement serial I/O via TCP
connections.
* ser-unix.c: Clean up getting/setting of tty state. Get rid of
SERIAL_RESTORE, add SERIAL_{GET|SET}_TTY_STATE interfaces.
* serial.c: Add start of support for connect command.
(serial_open): Distinguish between tcp and local devices.
* serial.h (struct serial_ops): Get rid of restore, add
get_tty_state and set_tty_state. Define protoypes and macros for
this mess.
* gdbserver/remote-utils.c: Add tcp support. (readchar): Do
some real buffering. Handle error conditions gracefully.
* gdbserver/remote-inflow-sparc.c: Update to remote-inflow.c
(Lynx), remove lots of cruft.
when compiling with gcc, but disable it for now. See comment.
* defs.h (LONGEST): Define as either "long" or "long long"
based on CC_HAS_LONG_LONG.
* defs.h (longest_to_int): Use CC_HAS_LONG_LONG to control
how longest_to_int is defined.
* c-valprint.c (c_val_print): Call print_longest.
* expprint.c (dump_expression): Use PRINTF_HAS_LONG_LONG
instead of LONG_LONG.
* {printcmd.c, gdbtypes.h} (LONG_LONG): Replace usages with
CC_HAS_LONG_LONG.
* printcmd.c (print_scalar_formatted): Call print_longest
and let it figure out what to do for PRINTF_HAS_LONG_LONG.
* typeprint.c (print_type_scalar): Call print_longest and let
it figure out what to do for PRINTF_HAS_LONG_LONG.
* valprint.c (val_print_type_code_int): Call print_longest
and let it figure out what to do for PRINTF_HAS_LONG_LONG.
* stabsread.c (LONG_LONG): Replace usages with CC_HAS_LONG_LONG.
* value.h (struct value): Replace usage of LONG_LONG with
CC_HAS_LONG_LONG.
* value.h (print_longest): Add prototype.
* values.c (LONG_LONG): Replace usages with CC_HAS_LONG_LONG.
* values.c (unpack_double): Collapse code that was unnecessarily
dependent on CC_HAS_LONG_LONG. Use LONGEST instead of direct types.
* values.c (value_from_longest): Remove dependency on
CC_HAS_LONG_LONG and just use LONGEST.
* solib.c (solib_map_sections): Use bfd_get_filename
to access filename field.
* solib.c (clear_solib): Save filename and free it later, after
bfd_close, since bfd_close may reference it. Use bfd_get_filename
to access the field.
* config/convex/xm-convex.h (LONG_LONG): Replace with
CC_HAS_LONG_LONG. Add define for PRINTF_HAS_LONG_LONG.
* doc/gdbint.texinfo (LONG_LONG): Replace with CC_HAS_LONG_LONG.
Add PRINTF_HAS_LONG_LONG references.
add a language parameter that is used to select the demangling
algorithm.
* defs.h (enum language): Move further up in file so enum can
be used in prototypes.
* defs.h (fputs_demangled): Update prototype to add lang arg.
* c-typeprint.c (cp_type_print_method_args): Add language arg
to fputs_demangled calls, remove DMGL_PARAMS flag.
* stack.c (print_frame_info): Remove obsolete code so we don't
have to update fputs_demangled usage in it.
* stack.c (print_frame_info, frame_info): Add language variable
to pass to fputs_demangled and initialize it from the symbol's
language. Call fputs_demangled with language arg.
* symtab.c (find_methods): Add language arg to fputs_demangled
call.
* tm-sysv4.h (CPLUS_MARKER): By default, g++ uses '.' as the
CPLUS_MARKER for all SVR4 systems, so follow suit.
* defs.h (strdup_demangled): Remove prototype.
* dwarfread.c (enum_type, synthesize_typedef): Use new macro
SYMBOL_INIT_LANGUAGE_SPECIFIC.
* dwarfread.c (new_symbol): Use SYMBOL_INIT_DEMANGLED_NAME.
* minsyms.c (install_minimal_symbols, prim_record_minimal_symbol,
prim_record_minimal_symbol_and_info): Use new macro
SYMBOL_INIT_LANGUAGE_SPECIFIC.
* minsyms.c (install_minimal_symbols): Use new macro
SYMBOL_INIT_DEMANGLED_NAME.
* stabsread.c (define_symbol): Use new macro
SYMBOL_INIT_DEMANGLED_NAME.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Use new macro SYMBOL_INIT_DEMANGLED_NAME.
* symfile.h (ADD_PSYMBOL_VT_TO_LIST): Use new macro
SYMBOL_INIT_DEMANGLED_NAME.
* symmisc.c (dump_msymbols, dump_symtab, print_partial_symbol):
SYMBOL_DEMANGLED_NAME now tests language itself.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): SYMBOL_DEMANGLED_NAME
now tests language itself.
* symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME): New macro that does
what SYMBOL_DEMANGLED_NAME used to do, directly access the C++
mangled name member in the language dependent portion of a symbol.
* symtab.h (SYMBOL_DEMANGLED_NAME): New macro that returns the
mangled name member appropriate for a symbol's language.
* symtab.h (SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME,
SYMBOL_MATCHES_NAME, SYMBOL_MATCHES_REGEXP):
SYMBOL_DEMANGLED_NAME now tests language itself.
* symtab.h (SYMBOL_INIT_LANGUAGE_SPECIFIC): New macro that
initializes language dependent portion of symbol.
* symtab.h (SYMBOL_INIT_DEMANGLED_NAME): New macro that
demangles and caches the demangled form of symbol names.
* utils.c (fputs_demangled, fprint_symbol): Use current language
to select an appropriate demangling algorithm.
* utils.c (strdup_demangled): Remove, no longer used.
**** start-sanitize-chill ****
* symtab.h (SYMBOL_CHILL_DEMANGLED_NAME): New macro that directly
access the Chill mangled name member in the language dependent
portion of a symbol.
* ch-lang.c (chill_demangle): New function, simple demangler.
* defs.h (chill_demangle): Add prototype.
* symtab.h (language_dependent_info): Add struct for Chill.
**** end-sanitize-chill ****
* defs.h (demangle_and_match): Remove prototype.
* dwarfread.c (STREQ, STREQN): Remove macros, replaced with STREQ
and STREQN defined in defs.h.
* dwarfread.c (set_cu_language): For completely unknown languages,
try to deduce the language from the filename. Retain behavior
that for known languages we don't know how to handle, we use
language_unknown.
* dwarfread.c (enum_type, symthesize_typedef): Initialize language
and demangled name fields in symbol.
* dwarfread.c, mipsread.c, partial-stab.h: For all usages of
ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
* dwarfread.c (new_symbol): Attempt to demangle C++ symbol names
and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
* elfread.c (STREQ): Remove macro, use STREQ defined in defs.h.
Replace usages throughout.
* elfread.c (demangle.h): Include.
* elfread.c (record_minimal_symbol): Remove prototype and function.
* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
B_CLRALL): Moved from symtab.h to gdbtypes.h.
* infcmd.c (jump_command): Remove code to demangle name and add
it to a cleanup list. Now just use SYMBOL_DEMANGLED_NAME.
* minsyms.c (demangle.h): Include.
* minsyms.c (lookup_minimal_symbol): Indent comment to match code.
* minsyms.c (install_minimal_symbols): Attempt to demangle symbol
names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
* mipsread.c (psymtab_language): Add static variable.
* stabsread.c (demangle.h): Include.
* stabsread.c (define_symbol): Attempt to demangle C++ symbol
names and cache them in the SYMBOL_DEMANGLED_NAME field.
* stack.c (return_command): Remove explicit demangling of name
and use of cleanups. Just use SYMBOL_DEMANGLED_NAME.
* symfile.c (demangle.h): Include.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Fix
to match macros in symfile.h and allow them to be compiled
if INLINE_ADD_PSYMBOL is not true.
* symfile.h (INLINE_ADD_PSYMBOL): Default to true if not set.
* symfile.h (ADD_PSYMBOL_*): Add language and objfile parameters.
Add code to demangle and cache C++ symbol names. Use macro form
if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Remove, also defined in symfile.c, which we already fixed.
* symtab.c (expensive_mangler): Remove prototype and function.
* symtab.c (find_methods): Remove physnames parameter and fix
prototype to match.
* symtab.c (completion_list_add_symbol): Name changed to
completion_list_add_name.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): New macro, adds both
the normal symbol name and the cached C++ demangled name.
* symtab.c (lookup_demangled_partial_symbol,
lookup_demangled_block_symbol): Remove prototypes and functions.
* symtab.c (lookup_symbol): Remove use of expensive_mangler,
use lookup_block_symbol instead of lookup_demangled_block_symbol.
Remove code to try demangling names and matching them.
* symtab.c (lookup_partial_symbol, lookup_block_symbol):
Fix to try matching the cached demangled name if no match is
found using the regular symbol name.
* symtab.c (find_methods): Remove unused physnames array.
* symtab.c (name_match, NAME_MATCH): Remove function and macro,
replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
* symtab.c (completion_list_add_symbol): Rewrite to use cached
C++ demangled symbol names.
* symtab.h: Much reformatting of structures and such to add
whitespace to make them more readable, and make them more
consistent with other gdb structure definitions.
* symtab.h (general_symbol_info): New struct containing fields
common to all symbols.
* symtab.h (SYMBOL_LANGUAGE, SYMBOL_DEMANGLED_NAME,
SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, SYMBOL_MATCHES_NAME,
SYMBOL_MATCHES_REGEXP, MSYMBOL_INFO, MSYMBOL_TYPE): New macros.
* symtab. (struct minimal_symbol, struct partial_symbol, struct
symbol): Use general_symbol_info struct.
* utils.c (demangle_and_match): Remove, no longer used.
* valops.c (demangle.h): Include.
* xcoffexec.c (eq): Remove macro, replace usages with STREQ.
* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
symmisc.c, symtab.c, valops.c: Replace references to minimal
symbol fields with appropriate macros.
* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
demangle.c, elfread.c, energize.c, environ.c, exec.c,
gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c,
symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c: Replace strcmp
and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
symmisc.c, tm-29k.h, valops.c, values.c: Replace SYMBOL_NAME
references with SYMBOL_SOURCE_NAME or SYMBOL_LINKAGE_NAME as
appropriate.
* buildsym.c (start_subfile, patch_subfile_names): Default the
source language to what can be deduced from the filename.
* buildsym.c (end_symtab): Update the source language in the
allocated symtab to match what we have been using.
* buildsym.h (struct subfile): Add a language field.
* c-typeprint.c (c_print_type): Remove code to do explicit
demangling.
* dbxread.c (psymtab_language): Add static variable.
* dbxread.c (start_psymtab): Initialize psymtab_language using
deduce_language_from_filename.
Per Bothner
Steve Chamberlain
Fred Fish
Jeff Law
J.T. Conklin
Jim Kingdon
Kung Hsu
Stan Shebs
Stu Grossman
Peter Schauer
David Edelsohn
K. Richard Pixley