When SVE is enabled, the V registers become pseudo registers based
on the Z registers. They should look the same as they do when
there is no SVE.
The existing code viewed them as single value registers. Switch
this to a vector.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_vnv_type): Use vector types.
SVE can view Z registers as 128bit values using .q prefix.
Add this view to the SVE feature.
gdb/ChangeLog:
* features/aarch64-sve.c (create_feature_aarch64_sve): Add q view.
When using older compilers, AT_HWCAP2 may not be be defined.
It is defined in elf/common.h, however including this in
gdbserver/linux-low.c causes conflicts.
Manually add the define if it does not exist.
gdb/gdbserver/ChangeLog:
* linux-low.c (AT_HWCAP2): Add define if not already included.
"mtfsb0 4*cr7+lt" doesn't make all that much sense, but unfortunately
glibc uses just that instead of "mtfsb0 28" to clear the fpscr xe bit.
So for backwards compatibility accept cr field expressions when
assembling mtfsb operands, but disassemble to a plain number.
PR 24390
include/
* opcode/ppc.h (PPC_OPERAND_CR_REG): Comment.
opcodes/
* ppc-opc.c (BTF): Define.
(powerpc_opcodes): Use for mtfsb*.
* ppc-dis.c (print_insn_powerpc): Print fields with both
PPC_OPERAND_CR_REG and PPC_OPERAND_CR_BIT as a plain number.
gas/
* testsuite/gas/ppc/476.d: Update mtfsb*.
* testsuite/gas/ppc/a2.d: Likewise.
During building of several cgen simulator's I notices the below
warnings. Adding includes fixes these.
Including config.h allows stdio.h to properly configure itself to expose
asprintf().
The other warnings for abort, free, memset, strlen are trivial.
Warnings:
../../../binutils-gdb/sim/or1k/../common/sim-watch.c: In function ‘sim_watchpoint_install’:
../../../binutils-gdb/sim/or1k/../common/sim-watch.c:415:10: warning: implicit declaration of function ‘asprintf’; did you mean ‘vasprintf’? [-Wimplicit-function-declaration]
if (asprintf (&name, "watch-%s-%s",
^~~~~~~~
vasprintf
../../../binutils-gdb/sim/lm32/../common/hw-device.c: In function ‘hw_strdup’:
../../../binutils-gdb/sim/lm32/../common/hw-device.c:59:34: warning: implicit declaration of function ‘strlen’ [-Wimplicit-function-declaration]
char *dup = hw_zalloc (me, strlen (str) + 1);
^~~~~~
../../../binutils-gdb/sim/lm32/../common/hw-events.c: In function ‘hw_event_queue_schedule’:
../../../binutils-gdb/sim/lm32/../common/hw-events.c:92:3: warning: implicit declaration of function ‘memset’ [-Wimplicit-function-declaration]
memset (&dummy, 0, sizeof dummy);
^~~~~~
../../../binutils-gdb/sim/lm32/../common/hw-handles.c: In function ‘hw_handle_remove_ihandle’:
../../../binutils-gdb/sim/lm32/../common/hw-handles.c:211:4: warning: implicit declaration of function ‘free’ [-Wimplicit-function-declaration]
free (delete);
^~~~
../../../binutils-gdb/sim/lm32/../common/sim-fpu.c: In function ‘pack_fpu’:
../../../binutils-gdb/sim/lm32/../common/sim-fpu.c:292:7: warning: implicit declaration of function ‘abort’ [-Wimplicit-function-declaration]
abort ();
^~~~~
sim/common/ChangeLog:
* sim-options.c: Include "config.h".
Include <stdio.h>.
* sim-watch.c: Include "config.h".
Include <stdio.h>.
* hw-device.c: Include <string.h>.
* hw-events.c: Include <string.h>.
* hw-handles.c: Include <stdlib.h>.
* sim-fpu.c: Include <stdlib.h>.
This fixes a TODO item and also fixes an error which we get when
building with no optimizations (-O0) in at least gcc 8.2.1.
Tested with sims that use cgen code lm32, or1k, cris, m32r and inlining
is working corretly.
Reference Error:
gcc -DHAVE_CONFIG_H -DWITH_DEFAULT_MODEL='"or1200"' -DWITH_ALIGNMENT=STRICT_ALIGNMENT \
-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31 -DWITH_TARGET_ADDRESS_BITSIZE=32 \
-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG -DDEFAULT_INLINE=0 -DWITH_SCACHE=16384 \
-I. -I../../../binutils-gdb/sim/or1k -I../common -I../../../binutils-gdb/sim/or1k/../common \
-I../../include -I../../../binutils-gdb/sim/or1k/../../include -I../../bfd \
-I../../../binutils-gdb/sim/or1k/../../bfd -I../../opcodes -I../../../binutils-gdb/sim/or1k/../../opcodes \
-g -o run nrun.o libsim.a ../../bfd/libbfd.a ../../opcodes/libopcodes.a ../../libiberty/libiberty.a \
-ldl -lz -lm
/usr/bin/ld: libsim.a(mloop.o): in function `extract':
/home/shorne/work/openrisc/gdb-musl/sim/or1k/mloop.c:82: undefined reference to `sim_addr_range_hit_p'
/usr/bin/ld: /home/shorne/work/openrisc/gdb-musl/sim/or1k/mloop.c:83: undefined reference to `sim_addr_range_hit_p'
collect2: error: ld returned 1 exit status
make[3]: *** [Makefile:305: run] Error 1
sim/common/ChangeLog:
* Make-common.in (sim-arange_h): Remove sim-arange.c
* sim-arange.c: Remove SIM_ARANGE_C.
Add ifdef for _SIM_ARANGE_C_.
Include "sim-arange.h".
Remove include for unused "sim-assert.h".
Remove DEFINE_INLINE_P. Remove DEFINE_NON_INLINE_P.
(sim_addr_range_add): Declare as INLINE_SIM_ARANGE.
(sim_addr_range_delete): Declare as INLINE_SIM_ARANGE.
(sim_addr_range_hit_p): Change from SIM_ARANGE_INLINE to
INLINE_SIM_ARANGE.
* sim-arange.h (sim_addr_range_add): Declare as
INLINE_SIM_ARANGE.
(sim_addr_range_delete): Declare as INLINE_SIM_ARANGE.
(sim_addr_range_hit_p) Declare as INLINE_SIM_ARANGE.
Remove definition of SIM_ARANGE_INLINE.
Remove [HAVE_INLINE].
Wrap include "sim-arange.c" in H_REVEALS_MODULE_P.
* sim-base.h: Include "sim-arange.h"
* sim-basics.h: Remove include of "sim-arange.h"
* sim-inline.c: Include "sim-arange.c"
* sim-inline.h: Define INLINE_SIM_ARANGE.
Define SIM_ARANGE_INLINE. Define EXTERN_SIM_ARANGE_P.
Define STATIC_INLINE_SIM_ARANGE. Define STATIC_SIM_ARANGE.
Valgrind detects the following error in a bunch of tests,
e.g. in gdb.base/foll-fork.exp.
==15155== VALGRIND_GDB_ERROR_BEGIN
==15155== Invalid read of size 8
==15155== at 0x55BE04: minimal_symbol_upper_bound(bound_minimal_symbol) (minsyms.c:1504)
==15155== by 0x3B2E9C: find_pc_partial_function(unsigned long, char const**, unsigned long*, unsigned long*, block const**) (blockframe.c:340)
==15155== by 0x3B3135: find_function_entry_range_from_pc(unsigned long, char const**, unsigned long*, unsigned long*) (blockframe.c:385)
==15155== by 0x4F5597: fill_in_stop_func(gdbarch*, execution_control_state*) [clone .part.16] (infrun.c:4124)
==15155== by 0x4FBE01: fill_in_stop_func (infrun.c:7636)
==15155== by 0x4FBE01: process_event_stop_test(execution_control_state*) (infrun.c:6279)
...
==15155== Address 0x715bec8 is 0 bytes after a block of size 2,952 alloc'd
==15155== at 0x4C2E2B3: realloc (vg_replace_malloc.c:836)
==15155== by 0x405F2C: xrealloc (common-utils.c:62)
==15155== by 0x55BA4E: xresizevec<minimal_symbol> (poison.h:170)
==15155== by 0x55BA4E: minimal_symbol_reader::install() (minsyms.c:1399)
==15155== by 0x4981C7: elf_read_minimal_symbols (elfread.c:1165)
...
This seems to be a regression created by:
commit 042d75e42c
Author: Tom Tromey <tom@tromey.com>
AuthorDate: Sat Mar 2 12:29:48 2019 -0700
Commit: Tom Tromey <tom@tromey.com>
CommitDate: Fri Mar 15 16:02:10 2019 -0600
Allocate minimal symbols with malloc
Before this commit, the array of 'struct minimal_symbol'
contained a last element that was a "null symbol". The comment in
minimal_symbol_reader::install was:
/* We also terminate the minimal symbol table with a "null symbol",
which is *not* included in the size of the table. This makes it
easier to find the end of the table when we are handed a pointer
to some symbol in the middle of it. Zero out the fields in the
"null symbol" allocated at the end of the array. Note that the
symbol count does *not* include this null symbol, which is why it
is indexed by mcount and not mcount-1. */
memset (&msymbols[mcount], 0, sizeof (struct minimal_symbol));
However, minimal_symbol_upper_bound was still based on the assumption
that the array of minsym is terminated by a minsym with a null symbol:
it is looping with:
for (i = 1; MSYMBOL_LINKAGE_NAME (msymbol + i) != NULL; i++)
Replace this NULL comparison by a logic that calculates how
many msymbol are following the msymbols from which we are starting from.
(Re-)tested on debian/amd64, natively and under valgrind.
gdb/ChangeLog
2019-03-24 Philippe Waroquiers <philippe.waroquiers@skynet.be>
Tom Tromey <tromey@adacore.com>
* minsyms.c (minimal_symbol_upper_bound): Fix buffer overflow.
Looking at the AArch64 buildbot, I noticed about two dozen old instances of
interrupt-daemon-attach taking up a full 100% cpu each.
If the test fails then the test binary relies on an alarm to ensure it dies
after 60 seconds.
As per the Linux man page for alarm:
Alarms created by alarm() ... are not inherited by children created via fork.
Update the test to add an alarm in the child and also put a sleep in the
child loop so it does not constantly consume cpu.
Note I haven't managed to re-create why the test failed. This fix will just
stop it hanging and consuming cpu when it does.
gdb/testsuite/ChangeLog:
* gdb.base/interrupt-daemon-attach.c (main): Add alarm and sleep
in child.
I noticed that trying to print the contents of a struct main_type
would fail when the type was a TYPE_CODE_RANGE:
(gdb) p *type.main_type
$1 = Python Exception <class 'gdb.error'> There is no member named low_undefined.:
And indeed, Python is right, fields "low_undefined" has been removed
from struct range_bounds back in ... 2014! It was done when we introduced
dynamic bounds handling. This patch fixes gdb-gdb.py.in according to
the new structure.
gdb/ChangeLog:
* gdb-gdb.py.in (StructMainTypePrettyPrinter.bound_img): New method.
(StructMainTypePrettyPrinter.bounds_img): Use new "bound_img"
method to compute the bounds of range types. Also print "[evaluated]"
if the bounds' values come from a dynamic evaluation.
The documentation say that the display_hint method must return a
string to serve as a display hint, and then goes on to list some
acceptable strings.
However, if we don't supply the display_hint method then we get a
default display style behaviour and there's currently no way (in the
python api) to force this default behaviour.
The guile api allows #f to be used in order to force the default
display style behaviour, and this is documented.
Currently, using None in the python api also forces the default
display behaviour.
This commit extends the documentation to make returning None from the
display_hint method an official mechanism by which the user can get
the default display style.
I've extended one of the existing tests to cover this case.
gdb/doc/ChangeLog:
* python.texi (Pretty Printing API): Document use of None for the
display_hint.
gdb/testsuite/ChangeLog:
* gdb.python/py-prettyprint.c (struct container) <is_map_p>: New
field.
(make_container): Initialise new field.
* gdb.python/py-prettyprint.exp: Add new tests.
* gdb.python/py-prettyprint.py (class ContainerPrinter)
<display_hint>: New method.
This makes the test names unique in gdb.python/py-prettyprint.exp, it
also switches to use gdb_breakpoint and gdb_continue_to_breakpoint
more so that we avoid test names with the source line number in - this
is bad if the test source ever changes as the test names will then
change.
One final change is to switch from using gdb_py_test_silent_cmd to use
gdb_test_no_output, the former should be used for running python
commands and can catch any thrown exception. However, in this case
the command being run is not a python command, its just a normal GDB
CLI command that produces no output, so lets use the appropriate
wrapper function.
gdb/testsuite/ChangeLog:
* gdb.python/py-prettyprint.exp: Use gdb_breakpoint and
gdb_continue_to_breakpoint more throughout this test.
(run_lang_tests) Supply unique test names, and use
gdb_test_no_output.
While writing a new test for 'set print pretty on' I spotted that GDB
will sometimes add a trailing whitespace character when pretty
printing. This commit removes the trailing whitespace and updates the
expected results in one tests where this was an issue.
I've added an extra test for 'set print pretty on' as it doesn't seem
to have much testing.
gdb/ChangeLog:
* cp-valprint.c (cp_print_value_fields): Don't print trailing
whitespace when pretty printing is on.
gdb/testsuite/ChangeLog:
* gdb.base/finish-pretty.exp: Update expected results.
* gdb.base/pretty-print.c: New file.
* gdb.base/pretty-print.exp: New file.
This fixes the testcases that are failing due to my recent patch.
It turns out that the start address across baremetal and linux builds
isn't entirely predictable without a linker script. Since the address
themselves are not the important thing I am ignoring them now.
Secondly I was encoding data using .word using non 0 values, however
because .word is subjected to endiannes these non-zero values under
big-endian happen to fall into the encoding space of instructions which
changes the disassembly. Using 0 fixes this problem and the purpose of
the test still holds, though objdump will dump ... for data only sections,
which is ok as the data/insn mixed sections will test the patch.
The ARM Attributes sections is not important and is ignored.
binutils/ChangeLog:
* testsuite/binutils-all/aarch64/in-order.d: Likewise.
* testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise.
* testsuite/binutils-all/aarch64/out-of-order.d: Likewise.
* testsuite/binutils-all/aarch64/out-of-order.s: Likewise.
* testsuite/binutils-all/arm/in-order-all.d: Likewise.
* testsuite/binutils-all/arm/in-order.d: Likewise.
* testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
* testsuite/binutils-all/arm/out-of-order.d: Likewise.
* testsuite/binutils-all/arm/out-of-order.s: Likewise.
ld/ChangeLog:
2019-02-26 Martin Liska <mliska@suse.cz>
* plugin.c (get_symbols): Add lto_kind_str, lto_resolution_str,
lto_visibility_str and use then to inform about plugin-symbols.
* testsuite/ld-plugin/plugin-12.d: Adjust expected pattern.
Commit ab42892fb7 ("Fix vertical scrolling of TUI source window")
introduced a use-after-free in source_cache::get_source_lines.
At the beginning of the method, we get the fullname of the symtab:
const char *fullname = symtab_to_fullname (s);
fullname points to the string owned by the symtab (s.fullname). When we
later do
scoped_fd desc = open_source_file (s);
s.fullname gets reallocated (even though the string contents may not
change). The fullname local variable now points to freed memory.
To avoid it, refresh the value of fullname after calling
open_source_file.
Here is the ASan report:
$ ./gdb -nx --data-directory=data-directory ./a.out
(gdb) start
Temporary breakpoint 1 at 0x1130: file test.cpp, line 12.
Starting program: /home/simark/build/binutils-gdb/gdb/a.out
Temporary breakpoint 1, main () at test.cpp:12
=================================================================
==26068==ERROR: AddressSanitizer: heap-use-after-free on address 0x6210003d4100 at pc 0x7fed89a34681 bp 0x7ffd8d185d80 sp 0x7ffd8d185528
READ of size 2 at 0x6210003d4100 thread T0
#0 0x7fed89a34680 in __interceptor_strlen /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:301
#1 0x55b6edf6c2f7 in std::char_traits<char>::length(char const*) /usr/include/c++/8.2.1/bits/char_traits.h:320
#2 0x55b6edf6c9b2 in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::basic_string(char const*, std::allocator<char> const&) /usr/include/c++/8.2.1/bits/basic_string.h:516
#3 0x55b6ef09121b in source_cache::get_source_lines(symtab*, int, int, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*) /home/simark/src/binutils-gdb/gdb/source-cache.c:214
#4 0x55b6ef0a15cb in print_source_lines_base /home/simark/src/binutils-gdb/gdb/source.c:1340
#5 0x55b6ef0a2045 in print_source_lines(symtab*, int, int, enum_flags<print_source_lines_flag>) /home/simark/src/binutils-gdb/gdb/source.c:1415
#6 0x55b6ef112c87 in print_frame_info(frame_info*, int, print_what, int, int) /home/simark/src/binutils-gdb/gdb/stack.c:914
#7 0x55b6ef10e90d in print_stack_frame(frame_info*, int, print_what, int) /home/simark/src/binutils-gdb/gdb/stack.c:180
#8 0x55b6ee9592f8 in print_stop_location /home/simark/src/binutils-gdb/gdb/infrun.c:7853
#9 0x55b6ee95948f in print_stop_event(ui_out*) /home/simark/src/binutils-gdb/gdb/infrun.c:7870
#10 0x55b6ef34b962 in tui_on_normal_stop /home/simark/src/binutils-gdb/gdb/tui/tui-interp.c:98
#11 0x55b6ee01a14d in std::_Function_handler<void (bpstats*, int), void (*)(bpstats*, int)>::_M_invoke(std::_Any_data const&, bpstats*&&, int&&) /usr/include/c++/8.2.1/bits/std_function.h:297
#12 0x55b6ee965415 in std::function<void (bpstats*, int)>::operator()(bpstats*, int) const /usr/include/c++/8.2.1/bits/std_function.h:687
#13 0x55b6ee962f1b in gdb::observers::observable<bpstats*, int>::notify(bpstats*, int) const /home/simark/src/binutils-gdb/gdb/common/observable.h:106
#14 0x55b6ee95a6e7 in normal_stop() /home/simark/src/binutils-gdb/gdb/infrun.c:8142
#15 0x55b6ee93f236 in fetch_inferior_event(void*) /home/simark/src/binutils-gdb/gdb/infrun.c:3782
#16 0x55b6ee8f2641 in inferior_event_handler(inferior_event_type, void*) /home/simark/src/binutils-gdb/gdb/inf-loop.c:43
#17 0x55b6eea2a1f0 in handle_target_event /home/simark/src/binutils-gdb/gdb/linux-nat.c:4358
#18 0x55b6ee7045f1 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733
#19 0x55b6ee704e89 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859
#20 0x55b6ee7027b5 in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:322
#21 0x55b6ee702907 in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371
#22 0x55b6eeadfc16 in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:331
#23 0x55b6eeae2ef9 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1174
#24 0x55b6eeae30c2 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1190
#25 0x55b6edf4fa89 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32
#26 0x7fed88ad8222 in __libc_start_main (/usr/lib/libc.so.6+0x24222)
#27 0x55b6edf4f86d in _start (/home/simark/build/binutils-gdb/gdb/gdb+0x197186d)
0x6210003d4100 is located 0 bytes inside of 4096-byte region [0x6210003d4100,0x6210003d5100)
freed by thread T0 here:
#0 0x7fed89a8ac19 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:66
#1 0x55b6edfe12df in xfree<char> /home/simark/src/binutils-gdb/gdb/common/common-utils.h:60
#2 0x55b6edfea675 in gdb::xfree_deleter<char>::operator()(char*) const /home/simark/src/binutils-gdb/gdb/common/gdb_unique_ptr.h:34
#3 0x55b6edfe532c in std::unique_ptr<char, gdb::xfree_deleter<char> >::reset(char*) /usr/include/c++/8.2.1/bits/unique_ptr.h:382
#4 0x55b6edfe7329 in std::unique_ptr<char, gdb::xfree_deleter<char> >::operator=(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /usr/include/c++/8.2.1/bits/unique_ptr.h:289
#5 0x55b6ef09ec2b in find_and_open_source(char const*, char const*, std::unique_ptr<char, gdb::xfree_deleter<char> >*) /home/simark/src/binutils-gdb/gdb/source.c:990
#6 0x55b6ef09f56a in open_source_file(symtab*) /home/simark/src/binutils-gdb/gdb/source.c:1069
#7 0x55b6ef090f78 in source_cache::get_source_lines(symtab*, int, int, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*) /home/simark/src/binutils-gdb/gdb/source-cache.c:205
#8 0x55b6ef0a15cb in print_source_lines_base /home/simark/src/binutils-gdb/gdb/source.c:1340
#9 0x55b6ef0a2045 in print_source_lines(symtab*, int, int, enum_flags<print_source_lines_flag>) /home/simark/src/binutils-gdb/gdb/source.c:1415
#10 0x55b6ef112c87 in print_frame_info(frame_info*, int, print_what, int, int) /home/simark/src/binutils-gdb/gdb/stack.c:914
#11 0x55b6ef10e90d in print_stack_frame(frame_info*, int, print_what, int) /home/simark/src/binutils-gdb/gdb/stack.c:180
#12 0x55b6ee9592f8 in print_stop_location /home/simark/src/binutils-gdb/gdb/infrun.c:7853
#13 0x55b6ee95948f in print_stop_event(ui_out*) /home/simark/src/binutils-gdb/gdb/infrun.c:7870
#14 0x55b6ef34b962 in tui_on_normal_stop /home/simark/src/binutils-gdb/gdb/tui/tui-interp.c:98
#15 0x55b6ee01a14d in std::_Function_handler<void (bpstats*, int), void (*)(bpstats*, int)>::_M_invoke(std::_Any_data const&, bpstats*&&, int&&) /usr/include/c++/8.2.1/bits/std_function.h:297
#16 0x55b6ee965415 in std::function<void (bpstats*, int)>::operator()(bpstats*, int) const /usr/include/c++/8.2.1/bits/std_function.h:687
#17 0x55b6ee962f1b in gdb::observers::observable<bpstats*, int>::notify(bpstats*, int) const /home/simark/src/binutils-gdb/gdb/common/observable.h:106
#18 0x55b6ee95a6e7 in normal_stop() /home/simark/src/binutils-gdb/gdb/infrun.c:8142
#19 0x55b6ee93f236 in fetch_inferior_event(void*) /home/simark/src/binutils-gdb/gdb/infrun.c:3782
#20 0x55b6ee8f2641 in inferior_event_handler(inferior_event_type, void*) /home/simark/src/binutils-gdb/gdb/inf-loop.c:43
#21 0x55b6eea2a1f0 in handle_target_event /home/simark/src/binutils-gdb/gdb/linux-nat.c:4358
#22 0x55b6ee7045f1 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733
#23 0x55b6ee704e89 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859
#24 0x55b6ee7027b5 in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:322
#25 0x55b6ee702907 in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371
#26 0x55b6eeadfc16 in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:331
#27 0x55b6eeae2ef9 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1174
#28 0x55b6eeae30c2 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1190
#29 0x55b6edf4fa89 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32
previously allocated by thread T0 here:
#0 0x7fed89a8b019 in __interceptor_malloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:86
#1 0x7fed88af983f in realpath@@GLIBC_2.3 (/usr/lib/libc.so.6+0x4583f)
#2 0x7fed899dbbbc in __interceptor_canonicalize_file_name /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:3297
#3 0x55b6ee376a03 in gdb_realpath(char const*) /home/simark/src/binutils-gdb/gdb/common/pathstuff.c:72
#4 0x55b6ef09ec12 in find_and_open_source(char const*, char const*, std::unique_ptr<char, gdb::xfree_deleter<char> >*) /home/simark/src/binutils-gdb/gdb/source.c:990
#5 0x55b6ef09f56a in open_source_file(symtab*) /home/simark/src/binutils-gdb/gdb/source.c:1069
#6 0x55b6ef0a0f12 in print_source_lines_base /home/simark/src/binutils-gdb/gdb/source.c:1270
#7 0x55b6ef0a2045 in print_source_lines(symtab*, int, int, enum_flags<print_source_lines_flag>) /home/simark/src/binutils-gdb/gdb/source.c:1415
#8 0x55b6ef112c87 in print_frame_info(frame_info*, int, print_what, int, int) /home/simark/src/binutils-gdb/gdb/stack.c:914
#9 0x55b6ef10e90d in print_stack_frame(frame_info*, int, print_what, int) /home/simark/src/binutils-gdb/gdb/stack.c:180
#10 0x55b6ee9592f8 in print_stop_location /home/simark/src/binutils-gdb/gdb/infrun.c:7853
#11 0x55b6ee95948f in print_stop_event(ui_out*) /home/simark/src/binutils-gdb/gdb/infrun.c:7870
#12 0x55b6ef34b962 in tui_on_normal_stop /home/simark/src/binutils-gdb/gdb/tui/tui-interp.c:98
#13 0x55b6ee01a14d in std::_Function_handler<void (bpstats*, int), void (*)(bpstats*, int)>::_M_invoke(std::_Any_data const&, bpstats*&&, int&&) /usr/include/c++/8.2.1/bits/std_function.h:297
#14 0x55b6ee965415 in std::function<void (bpstats*, int)>::operator()(bpstats*, int) const /usr/include/c++/8.2.1/bits/std_function.h:687
#15 0x55b6ee962f1b in gdb::observers::observable<bpstats*, int>::notify(bpstats*, int) const /home/simark/src/binutils-gdb/gdb/common/observable.h:106
#16 0x55b6ee95a6e7 in normal_stop() /home/simark/src/binutils-gdb/gdb/infrun.c:8142
#17 0x55b6ee93f236 in fetch_inferior_event(void*) /home/simark/src/binutils-gdb/gdb/infrun.c:3782
#18 0x55b6ee8f2641 in inferior_event_handler(inferior_event_type, void*) /home/simark/src/binutils-gdb/gdb/inf-loop.c:43
#19 0x55b6eea2a1f0 in handle_target_event /home/simark/src/binutils-gdb/gdb/linux-nat.c:4358
#20 0x55b6ee7045f1 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733
#21 0x55b6ee704e89 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859
#22 0x55b6ee7027b5 in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:322
#23 0x55b6ee702907 in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371
#24 0x55b6eeadfc16 in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:331
#25 0x55b6eeae2ef9 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1174
#26 0x55b6eeae30c2 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1190
#27 0x55b6edf4fa89 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32
#28 0x7fed88ad8222 in __libc_start_main (/usr/lib/libc.so.6+0x24222)
gdb/ChangeLog:
* source-cache.c (source_cache::get_source_lines): Re-read
fullname after calling open_source_file.
Philippe pointed out that some comments in minsyms.c still referred to
obstack allocation. This patch fixes these up.
In most cases here, my view is that the comments were more misleading
than helpful. So, I've generally removed text.
gdb/ChangeLog
2019-03-25 Tom Tromey <tromey@adacore.com>
* minsyms.c (BUNCH_SIZE): Update comment.
(~minimal_symbol_reader): Remove old comment.
(compact_minimal_symbols): Update comment.
(minimal_symbol_reader::install): Remove old comment. Update
other comments.
Similar to the AArch64 patches the Arm disassembler has the same issues with
out of order sections but also a few short comings.
For one thing there are multiple code blocks to determine mapping symbols, and
they all work slightly different, and neither fully correct. The first thing
this patch does is centralise the mapping symbols search into one function
mapping_symbol_for_insn. This function is then updated to perform a search in
a similar way as AArch64.
Their used to be a value has_mapping_symbols which was used to determine the
default disassembly for objects that have no mapping symbols. The problem with
the approach was that it was determining this value in the same loop that needed
it, which is why this field could take on the states -1, 0, 1 where -1 means
"don't know". However this means that until you actually find a mapping symbol
or reach the end of the disassembly glob, you don't know if you did the right
action or not, and if you didn't you can't correct it anymore.
This is why the two jump-reloc-veneers-* testcases end up disassembling some
insn as data when they shouldn't.
Out of order here refers to an object file where sections are not listed in a
monotonic increasing VMA order.
The ELF ABI for Arm [1] specifies the following for mapping symbols:
1) A text section must always have a corresponding mapping symbol at it's
start.
2) Data sections do not require any mapping symbols.
3) The range of a mapping symbol extends from the address it starts on up to
the next mapping symbol (exclusive) or section end (inclusive).
However there is no defined order between a symbol and it's corresponding
mapping symbol in the symbol table. This means that while in general we look
up for a corresponding mapping symbol, we have to make at least one check of
the symbol below the address being disassembled.
When disassembling different PCs within the same section, the search for mapping
symbol can be cached somewhat. We know that the mapping symbol corresponding to
the current PC is either the previous one used, or one at the same address as
the current PC.
However this optimization and mapping symbol search must stop as soon as we
reach the end or start of the section. Furthermore if we're only disassembling
a part of a section, the search is a allowed to search further than the current
chunk, but is not allowed to search past it (The mapping symbol if there, must
be at the same address, so in practice we usually stop at PC+4).
lastly, since only data sections don't require a mapping symbol the default
mapping type should be DATA and not INSN as previously defined, however if the
binary has had all its symbols stripped than this isn't very useful. To fix
this we determine the default based on the section flags. This will allow the
disassembler to be more useful on stripped binaries. If there is no section
than we assume you to be disassembling INSN.
[1] https://developer.arm.com/docs/ihi0044/latest/elf-for-the-arm-architecture-abi-2018q4-documentation#aaelf32-table4-7
binutils/ChangeLog:
* testsuite/binutils-all/arm/in-order-all.d: New test.
* testsuite/binutils-all/arm/in-order.d: New test.
* testsuite/binutils-all/arm/objdump.exp: Support .d tests.
* testsuite/binutils-all/arm/out-of-order-all.d: New test.
* testsuite/binutils-all/arm/out-of-order.T: New test.
* testsuite/binutils-all/arm/out-of-order.d: New test.
* testsuite/binutils-all/arm/out-of-order.s: New test.
ld/ChangeLog:
* testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Update disassembly.
* testsuite/ld-arm/jump-reloc-veneers-long.d: Update disassembly.
opcodes/ChangeLog:
* arm-dis.c (struct arm_private_data): Remove has_mapping_symbols.
(mapping_symbol_for_insn): Implement new algorithm.
(print_insn): Remove duplicate code.
The documentation for -D says that on Arm platforms -D should disassemble
data as instructions.
"If the target is an ARM architecture this switch also has the effect of
forcing the disassembler to decode pieces of data found in code sections
as if they were instructions. "
This makes it do as it says on the tincan so it's more consistent with
aarch32. The usecase here is for baremetal developers who have created
their instructions using .word directives instead if .insn.
Though for Linux users I do find this behavior somewhat non-optimal.
Perhaps there should be a new flag that just disassembles the values
following the actual mapping symbol?
binutils/ChangeLog:
* testsuite/binutils-all/aarch64/in-order-all.d: New test.
* testsuite/binutils-all/aarch64/out-of-order-all.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.d:
opcodes/ChangeLog:
* aarch64-dis.c (print_insn_aarch64):
Implement override.
My previous patch for AArch64 was not enough to catch all the cases where
disassembling an out-of-order section could go wrong. It had missed the case
DATA sections could be incorrectly disassembled as TEXT.
Out of order here refers to an object file where sections are not listed in a
monotonic increasing VMA order.
The ELF ABI for AArch64 [1] specifies the following for mapping symbols:
1) A text section must always have a corresponding mapping symbol at it's
start.
2) Data sections do not require any mapping symbols.
3) The range of a mapping symbol extends from the address it starts on up to
the next mapping symbol (exclusive) or section end (inclusive).
However there is no defined order between a symbol and it's corresponding
mapping symbol in the symbol table. This means that while in general we look
up for a corresponding mapping symbol, we have to make at least one check of
the symbol below the address being disassembled.
When disassembling different PCs within the same section, the search for mapping
symbol can be cached somewhat. We know that the mapping symbol corresponding to
the current PC is either the previous one used, or one at the same address as
the current PC.
However this optimization and mapping symbol search must stop as soon as we
reach the end or start of the section. Furthermore if we're only disassembling
a part of a section, the search is a allowed to search further than the current
chunk, but is not allowed to search past it (The mapping symbol if there, must
be at the same address, so in practice we usually stop at PC+4).
lastly, since only data sections don't require a mapping symbol the default
mapping type should be DATA and not INSN as previously defined, however if the
binary has had all its symbols stripped than this isn't very useful. To fix this
we determine the default based on the section flags. This will allow the
disassembler to be more useful on stripped binaries. If there is no section than
we assume you to be disassembling INSN.
[1] https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4#aaelf64-section4-5-4
binutils/ChangeLog:
* testsuite/binutils-all/aarch64/in-order.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as
well.
opcodes/ChangeLog:
* aarch64-dis.c (print_insn_aarch64): Update the mapping symbol search
order.
The AArch64 disassembler has an optimization that it uses to reduce the amount
it has to search for mapping symbols during disassembly. This optimization
assumes that sections are listed in the section header in monotonic increasing
VMAs. However this is not a requirement for the ELF specification.
Because of this when such "out of order" sections occur the disassembler would
pick the wrong mapping symbol to disassemble the section with.
This fixes it by explicitly passing along the stop offset for the current
disassembly glob and when this changes compared to the previous one we've seen
the optimization won't be performed. In effect this restarts the search from
a well defined starting point. Usually the symbol's address.
The existing stop_vma can't be used for this as it is allowed to be unset and
setting this unconditionally would change the semantics of this field.
binutils/ChangeLog:
* objdump.c (disassemble_bytes): Pass stop_offset.
* testsuite/binutils-all/aarch64/out-of-order.T: New test.
* testsuite/binutils-all/aarch64/out-of-order.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.s: New test.
include/ChangeLog:
* dis-asm.h (struct disassemble_info): Add stop_offset.
opcodes/ChangeLog:
* aarch64-dis.c (last_stop_offset): New.
(print_insn_aarch64): Use stop_offset.
This commit fixes a regression in the testsuite itself, triggered by
errors being raised from within gdb_test_multiple, originally reported
by Pedro Franco de Carvalho's at
<https://sourceware.org/ml/gdb-patches/2019-03/msg00160.html>. Parts
of the commit message are based on his report.
This started happening due to a commit that was introduced recently,
and it can cause the testsuite to hang.
The commit that triggers this is:
fe1a5cad30
[gdb/testsuite] Log wait status on process no longer exists error
That commit introduces a new "eof" block in gdb_test_multiple. That
is not incorrect itself, but dejagnu's remote_expect is picking that
block as the "default" action when an error is raised from within the
commands inside a call to gdb_test_multiple:
# remote_expect works basically the same as standard expect, but it
# also takes care of getting the file descriptor from the specified
# host and also calling the timeout/eof/default section if there is an
# error on the expect call.
#
proc remote_expect { board timeout args } {
I find that "feature" surprising, and I don't really know why it
exists, but this means that the eof section that remote_expect picks
as the error block can be executed even when there was no actual eof
and the GDB process is still running, so the wait introduced in the
commit that tries to get the exit status of GDB hangs forever, while
GDB itself waits for input.
This only happens when there are internal testsuite errors (not
testcase failures). This can be reproduced easily with a testcase
such as:
gdb_start
gdb_test_multiple "show version" "show version" {
-re ".*" {
error "forced error"
}
}
I think that working around this in GDB is useful so that the
testsuite doesn't hang in these cases.
Adding an empty "default" block at the end of the expect body in
gdb_test_multiple doesn't work, because dejagnu gives preference to
"eof" blocks:
if { $x eq "eof" } {
set save_next 1
} elseif { $x eq "default" || $x eq "timeout" } {
if { $error_sect eq "" } {
set save_next 1
}
}
And we do have "eof" blocks. So we need to make sure that the last
"eof" block is safe to use as the default error block. It's also
pedantically incorrect to print
"ERROR: Process no longer exists"
which is what we'd get if the last eof block we have was selected
(more below on this).
So this commit solves this by appending an "eof" with an empty
spawn_id list, so that it won't ever match.
Now, why is the first "eof" block selected today as the error block,
instead of the last one?
The reason is that remote_expect, while parsing the body to select the
default block to execute after an error, is affected by the comments
in the body (since they are also parsed).
If this comment in gdb_test_multiple
# patterns below apply to any spawn id specified.
is changed to
# The patterns below apply to any spawn id specified.
then the second eof block is selected and there is no hang.
Any comment at that same place with an even number of tokens also
works.
This is IMO a coincidence caused by how comments work in TCL.
Comments should only appear in places where a command can appear. And
here, remote_expect is parsing a list of options, not commands, so
it's not unreasonable to not parse comments, similarly to how this:
set a_list {
an_element
# another_element
}
results in a list with three elements, not one element.
The fact that comments with an even number of tokens work is just a
coincidence of how remote_expect's little state machine is
implemented.
I thought we could solve this by stripping out comment lines in
gdb_expect, but I didn't find an easy way to do that. Particularly, a
couple naive approaches I tried run into complications. For example,
we have gdb_test calls with regular expressions that include sequences
like "\r\n#", and by the time we get to gdb_expect, the \r\n have
already been expanded to a real newline, so just splitting the whole
body at newline boundaries, looking for lines that start with #
results in incorrectly stripping out half of the gdb_text regexp. I
think it's better (at least in this commit), to move the comments out
of the list, because it's much simpler and risk free.
gdb/testsuite/ChangeLog:
2019-03-25 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_multiple): Split appends to $code and
move comments outside list. Append '-i "" eof' section.
expression.h includes symtab.h, but apparently only for the
declaration of struct block. This patch changes it to foward-declare
the structure, and remove the include.
gdb/ChangeLog
2019-03-24 Tom Tromey <tom@tromey.com>
* expression.h: Don't include symtab.h.
(struct block): Forward declare.
I noticed that there are still many places referring to non-const
blocks. This constifies all the remaining ones that I found that
could be constified.
In a few spots, this search found unused variables or fields. I
removed these. I've also removed some unnecessary casts to
"struct block *".
gdb/ChangeLog
2019-03-24 Tom Tromey <tom@tromey.com>
* c-exp.y (typebase): Remove casts.
* gdbtypes.c (lookup_unsigned_typename, )
(lookup_signed_typename): Remove cast.
* eval.c (parse_to_comma_and_eval): Remove cast.
* parse.c (write_dollar_variable): Remove cast.
* block.h (struct block) <superblock>: Now const.
* symfile-debug.c (debug_qf_map_matching_symbols): Update.
* psymtab.c (psym_map_matching_symbols): Make "block" const.
(map_block): Make "block" const.
* symfile.h (struct quick_symbol_functions)
<map_matching_symbols>: Constify block argument to "callback".
* symtab.c (basic_lookup_transparent_type_quick): Make "block"
const.
(find_pc_sect_compunit_symtab): Make "b" const.
(find_symbol_at_address): Likewise.
(search_symbols): Likewise.
* dwarf2read.c (dw2_lookup_symbol): Make "block" const.
(dw2_debug_names_lookup_symbol): Likewise.
(dw2_map_matching_symbols): Update.
* p-valprint.c (pascal_val_print): Remove "block".
* ada-lang.c (ada_add_global_exceptions): Make "b" const.
(aux_add_nonlocal_symbols): Make "block" const.
(resolve_subexp): Remove cast.
* linespec.c (iterate_over_all_matching_symtabs): Make "block"
const.
(iterate_over_file_blocks): Likewise.
* f-exp.y (%union) <bval>: Remove.
* coffread.c (patch_opaque_types): Make "b" const.
* spu-tdep.c (spu_catch_start): Make "block" const.
* c-valprint.c (print_unpacked_pointer): Remove "block".
* symmisc.c (dump_symtab_1): Make "b" const.
(block_depth): Make "block" const.
* d-exp.y (%union) <bval>: Remove.
* cp-support.h (cp_lookup_rtti_type): Update.
* cp-support.c (cp_lookup_rtti_type): Make "block" const.
* psymtab.c (psym_lookup_symbol): Make "block" const.
(maintenance_check_psymtabs): Make "b" const.
* python/py-framefilter.c (extract_sym): Make "sym_block" const.
(enumerate_locals, enumerate_args): Update.
* python/py-symtab.c (stpy_global_block): Make "block" const.
(stpy_static_block): Likewise.
* inline-frame.c (block_starting_point_at): Make "new_block"
const.
* block.c (find_block_in_blockvector): Make return type const.
(blockvector_for_pc_sect): Make "b" const.
(find_block_in_blockvector): Make "b" const.
Commit 799efbe8e0 was supposed to fix
the below leak. However, for this fix to work, it is critical to
save the ptid before detach.
This commit (pushed as OBVIOUS, as the change was already reviewed/approved)
saves the ptid before the detach, as in the original reviewed patch
(see https://sourceware.org/ml/gdb-patches/2019-02/msg00263.html).
Re-tested on debian/amd64, natively and under valgrind.
==7426== 1,123 (72 direct, 1,051 indirect) bytes in 1 blocks are definitely lost in loss record 2,872 of 3,020
==7426== at 0x4C2C4CC: operator new(unsigned long) (vg_replace_malloc.c:344)
==7426== by 0x5BD1E1: get_thread_arch_aspace_regcache(ptid_t, gdbarch*, address_space*) (regcache.c:330)
==7426== by 0x5BD39A: get_thread_regcache (regcache.c:366)
==7426== by 0x5BD39A: get_current_regcache() (regcache.c:372)
==7426== by 0x4B1EB4: get_current_frame() (frame.c:1588)
...
I ran across a comment in symfile.c today:
/* Clear globals which might have pointed into a removed objfile.
FIXME: It's not clear which of these are supposed to persist
between expressions and which ought to be reset each time. */
It seems to me that this can be clarified: the parser entry points
ought to reset the innermost block tracker (and the expression context
block), and these should not be considered valid for code to use at
arbitrary times -- only immediately after an expression has been
parsed.
This patch implements this idea. This could be further improved by
removing the parser globals and changing the parser functions to
return this information, but I have not done this.
Tested by the buildbot.
gdb/ChangeLog
2019-03-23 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_create): Update.
* symfile.c (clear_symtab_users): Don't reset innermost_block.
* printcmd.c (display_command, do_one_display): Don't reset
innermost_block.
* parser-defs.h (enum innermost_block_tracker_type): Move to
expression.h.
(innermost_block): Update comment.
* parse.c (parse_exp_1): Add tracker_types parameter.
(parse_exp_in_context): Rename from parse_exp_in_context_1. Add
tracker_types parameter. Reset innermost_block.
(parse_exp_in_context): Remove.
(parse_expression_for_completion): Update.
* objfiles.c (~objfile): Don't reset expression_context_block or
innermost_block.
* expression.h (enum innermost_block_tracker_type): Move from
parser-defs.h.
(parse_exp_1): Add tracker_types parameter.
* breakpoint.c (set_breakpoint_condition, watch_command_1): Don't
reset innermost_block.
objfiles.h needs "struct bcache" to be complete, so it should include
bcache.h. This patch implements this.
Tested by rebuilding.
gdb/ChangeLog
2019-03-23 Tom Tromey <tom@tromey.com>
* objfiles.h: Include bcache.h.
I found a couple of spots that manually saved and restored the current
language. This patch changes them to use
scoped_restore_current_language.
Tested by the buildbot.
gdb/ChangeLog
2019-03-23 Tom Tromey <tom@tromey.com>
* linespec.c (get_current_search_block): Use
scoped_restore_current_language.
* symmisc.c (dump_symtab): Use scoped_restore_current_language.
Pauth address signing is enabled at binary compile time. When enabled the
return addresses for functions may be mangled. This patch adds functionality
to restore the original address for use in the prologue scan unwinder.
In the prologue analyzer, check for PACIASP/PACIBSP (enable address mangling)
and AUTIASP/AUTIBSP (disable address mangling).
When unwinding the PC from the prologue, unmask the register if required.
Add a test case to the prologue tests.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_analyze_prologue): Check for pauth
instructions.
(aarch64_analyze_prologue_test): Add PACIASP test.
(aarch64_prologue_prev_register): Unmask PC value.
Pauth address signing is enabled at binary compile time. When enabled the
return addresses for functions may be mangled. This patch adds functionality
to restore the original address for use in the DWARF unwinder.
DW_CFA_AARCH64_negate_ra_state in a binary indicates the toggling of address
signing between enabled and disabled. Ensure the state is stored in the DWARF
register ra_state.
Ensure the pauth DWARF registers are initialised.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_frame_unmask_address): New function.
(aarch64_dwarf2_prev_register): Unmask PC value.
(aarch64_dwarf2_frame_init_reg): Init pauth registers.
(aarch64_execute_dwarf_cfa_vendor_op): Check for
DW_CFA_AARCH64_negate_ra_state.
(aarch64_gdbarch_init): Add aarch64_execute_dwarf_cfa_vendor_op.
Map the pauth registers to DWARF.
Add a new pseudo register ra_state and also map this to DWARF. This register
is hidden from the user - prevent it from being read or written to. It will
be used for the unmangling of addresses.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_dwarf_reg_to_regnum): Check for pauth
registers.
(aarch64_pseudo_register_name): Likewise.
(aarch64_pseudo_register_type): Likewise.
(aarch64_pseudo_register_reggroup_p): Likewise.
(aarch64_gdbarch_init): Add pauth registers.
* aarch64-tdep.h (AARCH64_DWARF_PAUTH_RA_STATE): New define.
(AARCH64_DWARF_PAUTH_DMASK): Likewise.
(AARCH64_DWARF_PAUTH_CMASK): Likewise.
(struct gdbarch_tdep): Add regnum for ra_state.
Add the pauth registers to the regset lists.
Add a new regset type OPTIONAL_REGS which allows for the regset read to fail.
Once the read fails, it will not be checked again. This allows targets with
optional features to keep a single static regset_info structure.
gdb/ChangeLog:
* arch/aarch64.h (AARCH64_PAUTH_REGS_SIZE): New define.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_store_pauthregset): New function.
* linux-low.c (regsets_store_inferior_registers): Allow optional reads
to fail.
* linux-low.h (enum regset_type): Add OPTIONAL_REGS.
Initialise the pauth registers when creating a target description, and store
the regnum of the first pauth register.
Use ptrace to read the registers in the pauth feature.
Do not allow the registers to be written.
gdb/ChangeLog:
* aarch64-linux-nat.c (fetch_pauth_masks_from_thread): New
function.
(aarch64_linux_nat_target::fetch_registers): Read pauth registers.
* aarch64-tdep.c (aarch64_cannot_store_register): New function.
(aarch64_gdbarch_init): Add puth registers.
* aarch64-tdep.h (struct gdbarch_tdep): Add pauth features.
* arch/aarch64.h (AARCH64_PAUTH_DMASK_REGNUM): New define.
(AARCH64_PAUTH_CMASK_REGNUM): Likewise.
Alan Hayward
Alan Modra
GDB Administrator
Stafford Horne
Philippe Waroquiers
Joel Brobecker
Andrew Burgess
Tamar Christina
marxin
Nick Clifton
Simon Marchi
John Baldwin
Tom Tromey
Pedro Alves
Tom Tromey