* common/linux-procfs.c (linux_proc_get_int): New, from
linux_proc_get_tgid, change its LWPID type to pid_t, add parameter
field.
(linux_proc_get_tgid): Only call linux_proc_get_int.
(linux_proc_get_tracerpid): New.
(linux_proc_pid_has_state): New, from linux_proc_pid_is_zombie.
(linux_proc_pid_is_stopped, linux_proc_pid_is_zombie): Only call
linux_proc_pid_has_state.
* common/linux-procfs.h (linux_proc_get_tracerpid): New declaration.
* common/linux-ptrace.c: Include linux-procfs.h and buffer.h.
(linux_ptrace_attach_warnings): New.
* common/linux-ptrace.h (struct buffer, linux_ptrace_attach_warnings):
New declaration.
* linux-nat.c: Include exceptions.h, linux-ptrace.h and buffer.h.
(linux_nat_attach): New variables ex, buffer, message and message_s.
Wrap to_attach by TRY_CATCH and call linux_ptrace_attach_warnings.
gdb/gdbserver/
* linux-low.c (linux_attach_lwp_1): New variable buffer. Call
linux_ptrace_attach_warnings.
gdb/testsuite/
* gdb.base/attach-twice.c: New files.
* gdb.base/attach-twice.exp: New files.
* inferiors.c (add_pid_to_list, pull_pid_from_list): Delete.
* linux-low.c (struct simple_pid_list): New.
(stopped_pids): New a struct simple_pid_list pointer.
(add_to_pid_list, pull_pid_from_list): New.
(handle_extended_wait): Don't assume the first signal new children
report is SIGSTOP. Adjust call to pull_pid_from_list.
(linux_wait_for_lwp): Adjust.
2012-02-29 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* linux-low.c (linux_wait_1): Call unsuspend_all_lwps when
`step_over_finished' is true.
gdb/testsuite:
2012-02-29 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.trace/trace-mt.c: New
* gdb.trace/trace-mt.exp: New.
gdb/gdbserver/
* linux-low.c (pid_is_stopped): Delete, moved to common/.
(linux_attach_lwp_1): Adjust to use linux_proc_pid_is_stopped.
gdb/
* linux-nat.c (pid_is_stopped): Delete, moved to common/.
(linux_nat_post_attach_wait): Adjust to use
linux_proc_pid_is_stopped.
* common/linux-procfs.h (linux_proc_pid_is_stopped): Declare.
* common/linux-procfs.c (linux_proc_pid_is_stopped): New function,
based on pid_is_stopped from both linux-nat.c and
gdbserver/linux-low.c, and renamed.
* server.c (handle_query): Advertise support for target-side
breakpoint condition evaluation.
(process_point_options): New function.
(process_serial_event): When inserting a breakpoint, check for
a target-side condition that should be evaluated.
* mem-break.c: Include regcache.h and ax.h.
(point_cond_list_t): New data structure.
(breakpoint) <cond_list>: New field.
(find_gdb_breakpoint_at): Make non-static.
(delete_gdb_breakpoint_at): Clear any target-side
conditions.
(clear_gdb_breakpoint_conditions): New function.
(add_condition_to_breakpoint): Likewise.
(add_breakpoint_condition): Likewise.
(gdb_condition_true_at_breakpoint): Likewise.
(gdb_breakpoint_here): Return result directly instead
of going through a local variable.
* mem-break.h (find_gdb_breakpoint_at): New prototype.
(clear_gdb_breakpoint_conditions): Likewise.
(add_breakpoint_condition): Likewise.
(gdb_condition_true_at_breakpoint): Likewise.
* linux-low.c (linux_wait_1): Evaluate target-side breakpoint condition.
(need_step_over_p): Take target-side breakpoint condition into
consideration.
This reproduces on the GDBserver side what GDB does when readlink is
not supported.
gdb/gdbserver/ChangeLog:
* configure.ac: Add readlink to AC_CHECK_FUNCS list.
* configure, config.in: Regenerate.
* hostio.c: Provide an alternate implementation if HAVE_READLINK
is not defined.
Try SIGKILL first, then PTRACE_KILL.
* linux-low.c (linux_kill_one_lwp): New.
(linux_kill_one_lwp): Rename to ...
(kill_one_lwp_callback): ... this. Use the new
linux_kill_one_lwp.
2012-02-02 Pedro Alves <palves@redhat.com>
* tracepoint.c (cmd_qtminftpilen): Return 0 if there's no current
inferior.
gdb/
2012-02-02 Pedro Alves <palves@redhat.com>
* remote.c (remote_get_min_fast_tracepoint_insn_len): Return 0 if
the current inferior has no execution. Make sure the current
remote process matches gdb's current inferior.
* linux-low.c (linux_wait_for_event_1): Rename to ...
(linux_wait_for_event): ... here and merge it with former
linux_wait_for_event - new variable wait_ptid, use it.
(linux_wait_for_event): Remove - merge it to linux_wait_for_event_1.
Ulrich Weigand <ulrich.weigand@linaro.org>
ChangeLog:
* remote.c (remote_multi_process_p): Only check for multi-process
protocol feature, do not check for extended protocol.
(remote_supports_multi_process): Check for extended protocol here.
(set_general_process): Likewise.
(extended_remote_kill): Likewise.
(remote_pid_to_str): Likewise.
(remote_query_supported): Always query multiprocess mode.
gdbserver/ChangeLog:
* server.c (handle_v_requests): Only support vAttach and vRun to
start multiple processes when in extended protocol mode.
* linux-low.c (linux_create_inferior): Put empty if clause for write.
Revert:
2011-12-18 Hui Zhu <teawater@gmail.com>
* linux-low.c (linux_create_inferior): Save return value to ret.
redirect stdin from /dev/null, stdout to stderr.
* remote-utils.c (remote_is_stdio): New static global.
(remote_connection_is_stdio): New function.
(remote_prepare): Handle stdio connection.
(remote_open): Ditto.
(remote_close): Don't close stdin for stdio connections.
(read_prim,write_prim): New functions. Replace all calls to
read/write to these.
* server.c (main): Watch for "-" argument. Move call to
remote_prepare before start_inferior.
* server.h (STDIO_CONNECTION_NAME): New macro.
(remote_connection_is_stdio): Declare.
PR remote/13492
* i386-low.c (i386_low_stopped_data_address): Avoid fetching
DR_CONTROL unless necessary. Extend comments.
* linux-x86-low.c (x86_linux_prepare_to_resume): Don't write to
DR0-3 if not used. If any watchpoint was set, clear DR_STATUS.
Fix overlapping memcpy.
* mem-break.c (set_raw_breakpoint_at): New variable buf. Use it for
the read_inferior_memory transfer.
(delete_fast_tracepoint_jump): New variable buf. Use it for the
write_inferior_memory transfer.
(set_fast_tracepoint_jump): New variable buf. Use it for the
read_inferior_memory and write_inferior_memory transfers.
(uninsert_fast_tracepoint_jumps_at, reinsert_fast_tracepoint_jumps_at)
(delete_raw_breakpoint, uninsert_raw_breakpoint): New variable buf.
Use it for the write_inferior_memory transfer.
(check_mem_read, check_mem_write): New gdb_asserts for overlapping
buffers.
* s390-nat.c (SUBOFF): Remove.
(s390_native_supply, s390_native_collect): New functions.
(supply_gregset, supply_fpregset): Use s390_native_supply.
(fill_gregset, fill_fpregset): Use s390_native_collect.
* s390-tdep.c (s390_pseudo_register_reggroup_p): Update comment.
(s390_unwind_pseudo_register): New function.
(s390_prologue_frame_unwind_cache): Unwind PSW address and mask
registers instead of PC and CC.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_sigtramp_frame_unwind_cache): Do not unwind PC, CC, or
full GPR pseudos.
(s390_trad_frame_prev_register): New function.
(s390_frame_prev_register): Use it.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_dwarf2_prev_register): Use s390_unwind_pseudo_register.
(s390_dwarf2_frame_init_reg): Unwind PSW address and mask. Use
special callback to unwind any pseudo.
* features/s390-core32.xml: Add pswm/pswa to save/restore group.
* features/s390-core64.xml: Likewise.
* features/s390x-core64.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
gdbserver/ChangeLog:
* linux-s390-low.c (s390_collect_ptrace_register): Fully convert
PSW address/mask between 8-byte and 16-byte formats.
(s390_supply_ptrace_register): Likewise.
(s390_get_pc, s390_set_pc): 4-byte PSW address always includes
basic addressing mode bit.
* breakpoint.h (struct tracepoint): New field traceframe_usage.
* breakpoint.c (print_one_breakpoint_location): Identify
tracepoints as such when reporting hit counts, report
trace buffer usage.
(create_tracepoint_from_upload): Copy status info.
* tracepoint.h (struct trace_status): Rename error_desc to stop_desc,
add fields user_name, notes, start_time, stop_time.
(struct uploaded_tp): Add fields hit_count, traceframe_usage.
* tracepoint.c (trace_user): New global.
(trace_notes): New global.
(trace_stop_notes): New global.
(start_tracing): Add argument and trace note handling.
(stop_tracing): Ditto.
(trace_start_command): Add notes argument.
(trace_stop_command): Ditto.
(trace_status_command): Report additional status info.
(trace_status_mi): Similarly.
(trace_save): Update, record tracepoint status.
(set_disconnected_tracing): Call target method directly.
(send_disconnected_tracing_value): Remove.
(set_trace_user): New function.
(set_trace_notes): New function.
(set_trace_stop_notes): New function.
(parse_trace_status): Handle additional status.
(parse_tracepoint_status): New function.
(parse_tracepoint_definition): Call it.
(tfile_get_tracepoint_status): New function.
(init_tfile_ops): Use it.
(_initialize_tracepoint): Add new setshows.
* target.h (struct target_ops): New methods to_get_tracepoint_status
and to_set_trace_notes.
(target_get_tracepoint_status): New macro.
(target_set_trace_notes): New macro.
* target.c (update_current_target): Add new methods.
* remote.c (remote_get_tracepoint_status): New function.
(remote_set_trace_notes): New function.
(init_remote_ops): Add them.
* mi/mi-main.c (mi_cmd_trace_start): Add argument to call.
(mi_cmd_trace_stop): Ditto.
* tracepoint.c (struct tracepoint): New field traceframe_usage.
(tracing_start_time): New global.
(tracing_stop_time): New global.
(tracing_user_name): New global.
(tracing_notes): New global.
(tracing_stop_note): New global.
(cmd_qtstart): Set traceframe_usage, start_time.
(stop_tracing): Set stop_time.
(cmd_qtstatus): Report additional status.
(cmd_qtp): New function.
(handle_tracepoint_query): Call it.
(cmd_qtnotes): New function.
(handle_tracepoint_general_set): Call it.
(get_timestamp): Rename from tsv_get_timestamp.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
note-related options and variables.
(Tracepoint Packets): Document packet changes.
* gdb.trace/tstatus.exp: New.
* gdb.trace/actions.c: Include string.h.
Kwok Cheung Yeung <kcy@codesourcery.com>
* NEWS: Document shorter fast tracepoints and qTMinFTPILen packet.
* i386-tdep.c (i386_fast_tracepoint_valid_at): Query target for
the minimum instruction size for fast tracepoints.
* target.h (struct target_ops): Add new method
to_get_min_fast_tracepoint_insn_len.
(target_get_min_fast_tracepoint_insn_len): New.
* target.c (update_current_target): Set up new target operation.
* remote.c (remote_write_bytes_aux): Fix typo.
(remote_get_min_fast_tracepoint_insn_len): New.
(init_remote_ops): Initialize new field.
* gdb.texinfo (Create and Delete Tracepoints): Describe what is
needed to get shorter fast tracepoints.
(Tracepoint Packets): Document new qTMinFTPILen packet.
* linux-x86-low.c (small_jump_insn): New.
(i386_install_fast_tracepoint_jump_pad): Add arguments for
trampoline and error message, build a trampoline and issue a small
jump instruction to it.
(x86_install_fast_tracepoint_jump_pad): Add arguments for
trampoline and error message.
(x86_get_min_fast_tracepoint_insn_len): New.
(the_low_target): Add call to x86_get_min_fast_tracepoint_insn_len.
* linux-low.h (struct linux_target_ops): Add arguments to
install_fast_tracepoint_jump_pad operation, add new operation.
* linux-low.c (linux_install_fast_tracepoint_jump_pad): Add
arguments.
(linux_get_min_fast_tracepoint_insn_len): New function.
(linux_target_op): Add new operation.
* tracepoint.c (gdb_trampoline_buffer): New IPA variable.
(gdb_trampoline_buffer_end): Ditto.
(gdb_trampoline_buffer_error): Ditto.
(struct ipa_sym_addresses): Add fields for new IPA variables.
(symbol_list): Add entries for new IPA variables.
(struct tracepoint): Add fields to hold the address range of the
trampoline used by the tracepoint.
(trampoline_buffer_head): New static variable.
(trampoline_buffer_tail): Ditto.
(claim_trampoline_space): New function.
(have_fast_tracepoint_trampoline_buffer): New function.
(clone_fast_tracepoint): Fill in trampoline fields of tracepoint
structure.
(install_fast_tracepoint): Ditto, also add error buffer argument.
(cmd_qtminftpilen): New function.
(handle_tracepoint_query): Add response to qTMinFTPILen packet.
(fast_tracepoint_from_trampoline_address): New function.
(fast_tracepoint_collecting): Handle trampoline as part of jump
pad space.
(set_trampoline_buffer_space): New function.
(initialize_tracepoint): Initialize new IPA variables.
* target.h (struct target_ops): Add arguments to
install_fast_tracepoint_jump_pad operation, add new
get_min_fast_tracepoint_insn_len operation.
(target_get_min_fast_tracepoint_insn_len): New.
(install_fast_tracepoint_jump_pad): Add arguments.
* server.h (IPA_BUFSIZ): Define.
* linux-i386-ipa.c: Include extra header files.
(initialize_fast_tracepoint_trampoline_buffer): New function.
(initialize_low_tracepoint): Call it.
* server.h (set_trampoline_buffer_space): Declare.
(claim_trampoline_space): Ditto.
(have_fast_tracepoint_trampoline_buffer): Ditto.
* gdb.trace/ftrace.c: New.
* gdb.trace/ftrace.exp: New.
Watchpoint support doesn't work anymore when using gdbserver on Windows.
They just never trigger.
The problem comes from the fact that we always set the debug registers
to zero, no matter what. This in turn comes from the fact that we
use i386_low_insert_watchpoint to compute the DR values:
return i386_low_insert_watchpoint (&debug_reg_state,
type, addr, len);
This function saves the new values in debug_reg_state. However,
the values we actually use when setting the DR registers are
taken from two different globals:
static unsigned dr_status_mirror;
static unsigned dr_control_mirror;
These are really never actually changed (their value is set from
the DR values read from the inferior, but since we never change
them, in practice, they never change).
The fix is to use the values provided by debug_reg_state, and
to eliminate the two dr_[...] globals.
gdb/gdbserver/ChangeLog:
* win32-i386-low.c (dr_status_mirror, dr_control_mirror): Delete.
(i386_dr_low_get_control, i386_dr_low_get_status): Use
dr_status_mirror and dr_control_mirror from debug_reg_state.
(i386_dr_low_get_status): Use debug_reg_state.dr_status_mirror
(i386_initial_stuff): Remove use of deleted globals.
(i386_get_thread_context, i386_set_thread_context,
i386_thread_added): Use dr_status_mirror and dr_control_mirror
from debug_reg_state.
2011-11-05 Yao Qi <yao@codesourcery.com>
* tracepoint.c (gdb_collect): Loop over tracepoints of same
address as TPOINT's.
gdb/testsuite:
2011-11-05 Yao Qi <yao@codesourcery.com>
* gdb.trace/trace-break.exp: Add test on setting two
fast tracepoints at the same address.
* infrun.c (disable_randomization): New global variable.
(show_disable_randomization): New function.
(set_disable_randomization): Likewise.
(_initialize_infrun): Install set/show disable-randomization
commands.
* linux-nat.c (disable_randomization): Remove.
(show_disable_randomization): Likewise.
(set_disable_randomization): Likewise.
(_initialize_linux_nat): No longer install set/show
disable-randomization commands here.
(linux_nat_supports_disable_randomization): New function.
(linux_nat_add_target): Install it.
* remote.c (PACKET_QDisableRandomization): New enum value.
(remote_protocol_packets): Support QDisableRandomization.
(_initialize_remote): Likewise.
(remote_supports_disable_randomization): New function.
(init_remote_ops): Install it.
(extended_remote_supports_disable_randomization): New function.
(init_extended_remote_ops): Install it.
(extended_remote_disable_randomization): New function.
(extended_remote_create_inferior_1): Call it.
* target.h (struct target_ops): Add to_supports_disable_randomization.
(target_supports_disable_randomization): Add prototype.
* target.c (target_supports_disable_randomization): New function.
(find_default_supports_disable_randomization): Likewise.
(init_dummy_target): Install it.
doc/
* gdb.texinfo (Starting your Program): "set disable-randomization"
is no longer Linux-specific.
(Remote Configuration): Document "set remote
disable-randomization-packet".
(General Query Packets): Document "QDisableRandomization" packet
and add it to "qSupported" list.
gdbserver/
* configure.ac: Check support for personality routine.
* configure: Regenerate.
* config.in: Likewise.
* linux-low.c: Include <sys/personality.h>.
Define ADDR_NO_RANDOMIZE if necessary.
(linux_create_inferior): Disable address space randomization when
forking inferior, if requested.
(linux_supports_disable_randomization): New function.
(linux_target_ops): Install it.
* server.h (disable_randomization): Declare.
* server.c (disable_randomization): New global variable.
(handle_general_set): Handle QDisableRandomization.
(handle_query): Likewise for qSupported.
(main): Support --disable-randomization and --no-disable-randomization
command line arguments.
* target.h (struct target_ops): Add supports_disable_randomization.
(target_supports_disable_randomization): New macro.
The DSBT support is very close to the FDPIC code, so extend the existing
loadmap support to work with FDPIC loadmaps too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
(arm_linux_hwbp_cap): New static variable.
(arm_linux_get_hwbp_cap): Replace by ...
(arm_linux_init_hwbp_cap): ... this new function.
(arm_linux_get_hw_breakpoint_count): Use arm_linux_hwbp_cap.
(arm_linux_get_hw_watchpoint_count): Likewise.
(arm_linux_get_hw_watchpoint_max_length): Likewise.
(arm_arch_setup): Call arm_linux_init_hwbp_cap.
(arm_prepare_to_resume): Use perror_with_name instead of error.
* tracepoint.c (gdb_agent_op_sizes): New table.
(emit_eq_goto): New function.
(emit_ne_goto): New function.
(emit_lt_goto): New function.
(emit_le_goto): New function.
(emit_gt_goto): New function.
(emit_ge_goto): New function.
(is_goto_target): New function.
(compile_bytecodes): Recognize special cases of compare-goto
combinations and call specialized emitters for them.
* linux-x86-low.c (amd64_emit_eq_goto): New function.
(amd64_emit_ne_goto): New function.
(amd64_emit_lt_goto): New function.
(amd64_emit_le_goto): New function.
(amd64_emit_gt_goto): New function.
(amd64_emit_ge_goto): New function.
(amd64_emit_ops): Add the new functions.
(i386_emit_eq_goto): New function.
(i386_emit_ne_goto): New function.
(i386_emit_lt_goto): New function.
(i386_emit_le_goto): New function.
(i386_emit_gt_goto): New function.
(i386_emit_ge_goto): New function.
(i386_emit_ops): Add the new functions.
gdb/testsuite/
* gdb.arch/i386-dr3-watch.exp: Test that the i386 watchpoints
backend doesn't leave used debug registers behind.
gdb/gdbserver/
* i386-low.c (i386_insert_aligned_watchpoint): Don't pass the info
to the inferior here.
(i386_remove_aligned_watchpoint): Ditto.
(i386_handle_nonaligned_watchpoint): Return immediate on fail to
fit part of the watchpoint in the debug registers.
(i386_update_inferior_debug_regs): New.
(i386_low_insert_watchpoint): Work on a local mirror of the debug
registers, and only update the inferior on success.
(i386_low_remove_watchpoint): Ditto.
gdb/
* i386-nat.c (I386_DR_VACANT, I386_DR_LOCAL_ENABLE)
(I386_DR_GLOBAL_ENABLE, I386_DR_DISABLE, I386_DR_SET_RW_LEN)
(I386_DR_GET_RW_LEN, I386_DR_WATCH_HIT): Add state parameter and
adjust.
(dr_mirror, dr_status_mirror, dr_control_mirror): Delete.
(struct i386_debug_reg_state): New.
(i386_init_dregs): New.
(dr_mirror): New.
(i386_cleanup_dregs): Use i386_init_dregs.
(i386_show_dr): Add state parameter and adjust.
(i386_insert_aligned_watchpoint): Ditto. Don't pass the info to
the inferior here.
(i386_remove_aligned_watchpoint): Likewise.
(i386_handle_nonaligned_watchpoint): Add state parameter and adjust.
(i386_update_inferior_debug_regs): New.
(i386_insert_watchpoint): Work on a local mirror of the debug
registers, and only update the inferior on success.
(i386_remove_watchpoint): Ditto.
(i386_region_ok_for_watchpoint): Adjust.
(i386_stopped_data_address): Adjust.
(i386_insert_hw_breakpoint): Adjust.
(i386_remove_hw_breakpoint): Adjust.
gdb/gdbserver/
* linux-x86-low.c (i386_dr_low_get_addr): Fix off by one in
assertion.
* win32-i386-low.c (i386_dr_low_get_addr): Ditto.
gdb/testsuite/
* gdb.arch/i386-dr3-watch.c: New file.
* gdb.arch/i386-dr3-watch.exp: New file.
* NEWS: Mention $sdir,$pdir.
* gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): Add $sdir:$pdir.
* linux-thread-db.c (try_thread_db_load_from_pdir): New function.
(try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $pdir, $sdir. Remove trying of
system directories if search of libthread-db-search-path fails,
that is now done via $sdir.
(has_libpthread): New function.
(thread_db_load): Remove search for libthread_db in directory of
libpthread, that is now done via $pdir.
gdbserver/
* thread-db.c (try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $sdir, ignore $pdir.
Remove trying of system directories if search of
libthread-db-search-path fails, that is now done via $sdir.
doc/
* gdb.texinfo (Threads): Document $sdir,$pdir.
(Server): Document $pdir exception.
experiment is still running.
gdb/
* breakpoint.c (disable_breakpoint): Disable all locations
associated with a tracepoint on target if a trace experiment is
running.
(disable_command): Disable a specific tracepoint location on target if
a trace experiment is running.
(do_enable_breakpoint): Enable all locations associated with a
tracepoint on target if a trace experiment is running.
(enable_command) Enable a specific tracepoint location on target if a
trace experiment is running.
* target.c (update_current_target): Add INHERIT and de_fault clauses for
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint.
* target.h: Add declaration of struct bp_location.
(struct target_ops): Add new functions
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint to target operations.
(target_supports_enable_disable_tracepoint): New macro.
(target_enable_tracepoint): New macro.
(target_disable_tracepoint): New macro.
* remote.c (struct remote_state): Add new field.
(remote_enable_disable_tracepoint_feature): New.
(remote_protocol_features): Add new entry.
(remote_supports_enable_disable_tracepoint): New.
(remote_enable_tracepoint): New.
(remote_disable_tracepoint): New.
(init_remote_ops): Add remote_enable_tracepoint,
remote_disable_tracepoint and remote_supports_enable_disable_tracepoint
to remote operations.
* tracepoint.c (start_tracing): Allow tracing to start without any
tracepoints enabled with just a warning if they can be re-enabled
later.
* NEWS: Add news item for the new behaviour of the enable and disable
GDB commands when applied to tracepoints.
Add news items for the new remote packets QTEnable and QTDisable.
gdb/doc/
* gdb.texinfo: Document change in the behaviour of the enable and
disable GDB commands when applied to tracepoints.
Document the EnableDisableTracepoints remote stub feature.
Document QTEnable and QTDisable in the list of tracepoint packets.
gdb/gdbserver/
* server.c (handle_query): Add EnableDisableTracepoints to the list
of supported features.
* tracepoint.c (clear_installed_tracepoints): Uninstall disabled
tracepoints.
(cmd_qtenable_disable): New.
(cmd_qtstart): Install tracepoints even if disabled.
(handle_tracepoint_general_set): Add call to cmd_qtenable_disable on
receiving a QTEnable or QTDisable packet.
(gdb_collect): Skip data collection if fast tracepoint is disabled.
(ust_marker_to_static_tracepoint): Do not ignore disabled static
tracepoints.
(gdb_probe): Skip data collection if static tracepoint is disabled.
(_initialize_thread_db): Add setter for libthread-db-search-path.
gdbserver/
* thread-db.c (thread_db_handle_monitor_command): Handle elided path.
doc/
* gdb.texinfo (Threads): If an empty path is provided for
libthread-db-search-path it is reset to its default value.
(Server): Ditto.
* linux-nat.c: Move common macros to ...
Include linux-ptrace.h.
* common/linux-ptrace.h: ... here. New.
gdb/gdbserver/
* linux-low.c: Move common macros to linux-ptrace.h.
Include linux-ptrace.h.
* Makefile.in (linux_ptrace_h): New.
(linux-low.o): Depends on linux-ptrace.h.
* NEWS: Document the new gdbserver --once option.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): New anchor
for disconnected tracing.
(Multi-Process Mode for @code{gdbserver}): Mention --multi and
extended-remote relationship. Mention --once.
(TCP port allocation lifecycle of @code{gdbserver}): New.
gdb/gdbserver/
* remote-utils.c (handle_accept_event): Close LISTEN_DESC only if
RUN_ONCE. Comment for the LISTEN_DESC delete_file_handler call.
(remote_prepare): New function with most of the TCP code from ...
(remote_open): ... here. Detect PORT here unconditionally. Move also
setting transport_is_reliable.
* server.c (run_once): New variable.
(gdbserver_usage): Document it.
(main): Set run_once for `--once'. Call remote_prepare. Exit after
the first run if RUN_ONCE.
* server.h (run_once, remote_prepare): New declarations.
gdb/testsuite/
* gdb.base/solib-disc.exp: Set gdbserver_reconnect_p.
* lib/gdb.exp (gdb_init): Clear gdbserver_reconnect_p.
* lib/gdbserver-support.exp (gdbserver_start): Add `--once' if
!gdbserver_reconnect_p..
(gdbserver_reconnect): Call error if !gdbserver_reconnect_p..
* win32-low.c (win32_create_inferior): Use new cygwin_path_list
function to avoid warning.
(win32_add_one_solib): Use cygwin_conv_path function to avoid
warning.
function call message.
(target_signal_to_host): Add _ markup and remove trailing new line
from warning call message.
(target_signal_from_command): Add _ markup to error function call
message.
* gdbserver/server.h (Macro _): Define it if not available.
2011-03-09 Yao Qi <yao@codesourcery.com>
Revert:
2011-02-11 Yao Qi <yao@codesourcery.com>
* common/Makefile.in: Add copyright header.
2011-02-11 Yao Qi <yao@codesourcery.com>
* Makefile.in: Remove signals.o from COMMON_OBS. Link
libcommon.a.
* configure.ac: Add common to sub dir.
* configure: Regenerate.
gdb/gdbserver/
2011-03-09 Yao Qi <yao@codesourcery.com>
Revert:
2011-03-04 Yao Qi <yao@codesourcery.com>
* Makefile.in: Remove GNU make feature --directory.
2011-03-05 Yao Qi <yao@codesourcery.com>
* Makefile.in (CLEANDIRS, REQUIRED_SUBDIRS): New variable.
(subdir_do): New make target. Copied from gdb/Makefile.
(maintainer-clean, realclean, distclean, clean): Call corresponding
make targets in common/Makefile.
2011-02-11 Yao Qi <yao@codesourcery.com>
* configure.ac: Call AC_PROG_RANLIB.
* Makefile.in: Remove signals.o from OBS. Link libcommon.a.
* configure: Regenerate.
This problem was noticed during the nightly snapshot build,
but can be reduced to:
% /path/to/gdb/gdbserver/configure
% make clean
The "make clean" fails, because it tries to do a "make clean"
in the common/ subdirectory. But the problem is that this
common/ subdirectory is NOT created during the configure phase,
but rather during the build phase. The error is fatal because
we had put the common subdirectory in the list of REQUIRED_SUBDIRS.
This fixes the problem by removing it from the REQUIRED_SUBDIRS
list.
gdb/gdbserver/ChangeLog:
* Makefile.in (REQUIRED_SUBDIRS): Remove $(LIBCOMMON_DIR).
011-03-05 Yao Qi <yao@codesourcery.com>
* Makefile.in (CLEANDIRS, REQUIRED_SUBDIRS): New variable.
(subdir_do): New make target. Copied from gdb/Makefile.
(maintainer-clean, realclean, distclean, clean): Call corresponding
make targets in common/Makefile.
* regcache.c (init_register_cache): Initialize
regcache->register_status.
(free_register_cache): Release regcache->register_status.
(regcache_cpy): Copy register_status.
(registers_to_string): Print 'x's for unavailable registers.
(supply_register): Mark the register's status valid or
unavailable, depending on whether a buffer was passed in or not.
(supply_register_zeroed): New.
(supply_regblock): Mark the registers' status valid or
unavailable, depending on whether a buffer was passed in or not.
* regcache.h (REG_UNAVAILABLE, REG_VALID): New defines.
(struct regcache): New `register_status' field.
(supply_register_zeroed): Declare.
* i387-fp.c (i387_xsave_to_cache): Zero out registers using
supply_register_zeroed, rather than passing a NULL buffer to
supply_register.
* tracepoint.c (fetch_traceframe_registers): Update comment.
* server.h (decode_xfer_write): Change prototype.
* remote-utils.c (decode_xfer_write): Remove `annex' parameter,
and don't extract the annex here.
* server.c (decode_xfer_read): Remove `annex' parameter,
and don't extract the annex here.
(decode_xfer): New.
(struct qxfer): New.
(handle_qxfer_auxv, handle_qxfer_features, handle_qxfer_libraries)
(handle_qxfer_osdata, handle_qxfer_siginfo, handle_qxfer_spu)
(handle_qxfer_statictrace): New functions, abstracted out from
handle_query, and made to use the struct qxfer interface.
(handle_threads_qxfer_proper): Rename to ...
(handle_qxfer_threads_proper): ... this.
(handle_threads_qxfer): Rename to ...
(handle_qxfer_threads): ... this. Adjust.
(qxfer_packets): New array.
(handle_qxfer): New function.
(handle_query): Use handle_qxfer.
gdb/ChangeLog:
* top.c (print_gdb_version): Update copyright year in version output.
gdb/gdbserverChangeLog:
* server.c (gdbserver_version): Update copyright year in version
output.
* gdbreplay.c (gdbreplay_version): Ditto.
Building gdbserver for nommu targets atm fails with:
linux-low.c: In function 'linux_tracefork_child':
linux-low.c:4151: error: pointer of type 'void *' used in arithmetic
So cast the void* to a char*.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
recursively invoke make for install-only.
* data-directory/Makefile.in: Add FLAGS_TO_PASS variable.
(install): Pass FLAGS_TO_PASS when recursively make install-only.
gdbserver/
* Makefile.in: Add FLAGS_TO_PASS variable.
(install): Remove dependency of install-only and recursively
invoke make for install-only.
Jan Kratochvil
Yao Qi
Joel Brobecker
Pedro Alves
Maciej W. Rozycki
Luis Machado
Ulrich Weigand
Doug Evans
Hui Zhu
Stan Shebs
Mike Frysinger
Jie Zhang
Eli Zaretskii
Kwok Yeung
Tom Tromey
Joseph Myers
Nathan Froyd
Pierre Muller
Michael Snyder