From: Robin Getz <robin.getz@analog.com>
Overflow with shift operations happens independently of saturation, but
we have the logic merged. Extend the lshift function so that callers
can tell it when to handle each independently, and then do so when it's
needed.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This isn't entirely correct in that it assumes the signal numbering of
the target and host match, but seeing as we already make that assumption
in a few places, this patch doesn't make the situation any worse.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
To make it easier to support ebiu banks at other addresses, move the base to
a runtime parameter rather than structure. Future work will make this more
dynamic, but I'm waiting for more details first.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The 32bit allopcodes test had quite a bit of optimization added to it
so that it ran in a reasonable amount of time out of uncached memory.
Port those changes over to the 16bit test so the two share common code.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
PR symtab/13777
* dwarf2read.c (process_full_comp_unit): Set LOCATIONS_VALID only for
GCC >=4.5.
gdb/testsuite/
PR symtab/13777
* gdb.dwarf2/dw2-skip-prologue.S (DW_AT_producer): Set it to 4.5.0.
Consider the following declaration:
type Small is new Integer range 0 .. 2 ** 4 - 1;
type Simple_Array is array (1 .. 4) of Small;
pragma Pack (Simple_Array);
SA : Simple_Array := (1, 2, 3, 4);
Trying to change the value of one of the elements in the packed array
causes the debugger to crash:
(gdb) set sa(3) := 9
[1] 4880 segmentation fault gdb -q foo
The circumstances leading to the crash are as follow:
. ada_evaluate_subexp creates a value corresponding to "sa(3)".
. ada_evaluate_subexp then tries to assign 9 to this value, and
for this calls value_assign (via ada_value_assign).
. Because the array is packed, the destination value is 3 bits long,
and as a result, value_assign uses the parent to determine that
element byte address and offset:
| if (value_bitsize (toval))
| {
| struct value *parent = value_parent (toval);
|
| changed_addr = value_address (parent) + value_offset (toval);
The destination value (corresponding to "sa(3)") was incorrectly created
by ada-lang.c:ada_value_primitive_packed_val, because the "parent" was
left as NULL. So, when we try to dereference it to get the parent address,
GDB crashed.
The first part of the fix therefore consists in setting that field.
This required the addition of a new "setter" in value.[hc]. It fixes
the crash, but is still not sufficient for the assignment to actually
work.
The second part of the problem came from the fact that value_assign
seems to expect the "child"'s address to be equal to the parent's address,
with the difference being the offset. Unfortunately, this requirement was
not followed by ada_value_primitive_packed_val, so the second part of
the fix consisted in fixing that.
Still, this was not sufficient, because it caused a regression when
trying to perform an aggregate assignment of a packed array of packed
record. The key element here is the nesting of packed entities.
Looking at the way ada_value_primitive_packed_val creates the value
of each sub-component, one can see that the value's offset is set
to the offset compared to the start of the parent. This was meant to
match what value_primitive_field does as well.
So, with our array of records, if the record offset was 2, and if
the field we're interested in that record is at offset 1, the record
value's offset would be set to 2, and the field value's offset would
be set to 1. But the address for both values would be left to the
array's address. This is where things start breaking down, because
the value_address function for our field value would return the
address of the array + 1, instead of + 3.
This is what causes the final issue, here, because ada-lang.c's
value_assign_to_component needs to compute the offset of the
subcomponent compared to the top-level aggregate's start address
(the array in our case). And it does so by subtracting the array's
address from the sub-component's address. When you have two levels
of packed components, and the mid-level component is at an offset of
the top-level component, things didn't work, because the component's
address was miscomputed (the parent's offset is missing).
The fix consists is fixing value_address to match the work done by
value_primitive_field (where we ignore the parent's offset).
gdb/ChangeLog:
* value.h (set_value_parent): Add declaration.
* value.c (set_value_parent): New function.
(value_address): If VALUE->PARENT is not NULL, then use it as
the base address instead of VALUE->LOCATION.address.
* ada-lang.c (ada_value_primitive_packed_val): Keep V's address
the same as OBJ's address. Adjust V's offset accordingly.
Set V's parent.
gdb/testsuite/ChangeLog:
* gdb.ada/set_pckd_arr_elt: New testcase.
PR breakpoints/10738
* dwarf2read.c (use_deprecated_index_sections): New global.
(struct partial_die_info): New member may_be_inlined.
(read_partial_die): Set may_be_inlined where appropriate.
(add_partial_subprogram): Add partial symbols for partial
DIEs that may be inlined.
(new_symbol_full): Add inlined subroutines to the current
scope.
(write_psymtabs_to_index): Bump version number.
(dwarf2_read_index): Read only version 6 indices unless
use_deprecated_index_sections is set.
* linespec.c (symbol_and_data_callback): New structure.
(iterate_inline_only): New function.
(iterate_over_all_matching_symtabs): New argument
"include_inline". If nonzero, also call the callback for
symbols representing inlined subroutines.
(lookup_prefix_sym): Pass extra argument to the above.
(find_function_symbols): Likewise.
(add_matching_symbols_to_info): Likewise.
* NEWS: Mention that GDB can now set breakpoints on inlined
functions.
gdb/doc:
PR breakpoints/10738
* gdb.texinfo (Inline Functions): Remove the now-unnecessary @item
stating that GDB cannot set breakpoints on inlined functions.
(Mode Options): Document --use-deprecated-index-sections.
(Index Section Format): Document new index section version format.
gdb/testsuite:
PR breakpoints/10738
* gdb.opt/inline-break.exp: New file.
* gdb.opt/inline-break.c: Likewise.
* gdb.dwarf2/inline-break.exp: Likewise.
* gdb.dwarf2/inline-break.S: Likewise.
* gdb.base/annota1.exp: Cope with old .gdb_index warnings.
* gdb.base/async-shell.exp: Likewise.
* lib/mi-support.exp (library_loaded_re): Likewise.
(powerpc_opcd_indices): Bump array size.
(disassemble_init_powerpc): Set powerpc_opcd_indices entries
corresponding to unused opcodes to following entry.
(lookup_powerpc): New function, extracted and optimised from..
(print_insn_powerpc): ..here.
(arm_register_g_packet_guesses): New function.
(arm_gdbarch_init): Don't force a target description with
registers when the executable is detected as M-profile. Instead
set gdbarch->tdep->is_m. Register `g' packet guesses.
(_initialize_arm_tdep): Initialize the new target description.
* features/arm-with-m-fpa-layout.xml: New description.
* features/arm-with-m-fpa-layout.c: New, generated.
When debugging on Windows with GDBserver, the debugger starts
failing after hitting a breakpoint. For instance:
(gdb) b foo
Breakpoint 1 at 0x40177e: file foo.adb, line 5.
(gdb) cont
Continuing.
Breakpoint 1, foo () at foo.adb:5
5 Put_Line ("Hello World."); -- STOP
(gdb) n
Program received signal SIGSEGV, Segmentation fault.
0x00401782 in foo () at foo.adb:5
5 Put_Line ("Hello World."); -- STOP
There are two issues:
1. While trying to re-insert a breakpoint that is still inserted
in memory, insert_bp_location wipes out the breakpoint location's
shadow_contents. As a consequence, we cannot restore the proper
instruction when removing the breakpoint anymore. That's why
the inferior's behavior changes when trying to resume after
the breakpoint was hit.
2. mem-break.c:default_memory_insert_breakpoint passes a breakpoint
location's shadow_contents as the buffer for a memory read.
This reveals a limitation of the various memory-read target
functions. This patch documents this limitation and adjust
the two calls that seem to hit that limitation.
gdb/ChangeLog:
* breakpoint.c (breakpoint_xfer_memory): Add assertion.
Update function description.
(insert_bp_location): Do not wipe bl->target_info out.
* mem-break.c: #include "gdb_string.h".
(default_memory_insert_breakpoint): Do not call target_read_memory
with a pointer to the breakpoint's shadow_contents buffer. Use
a local buffer instead.
* m32r-tdep.c (m32r_memory_insert_breakpoint): Ditto.
(get_elf_x86_64_backend_data, GET_PLT_ENTRY_SIZE): New macros.
(elf_x86_64_arch_bed): New variable.
(elf_backend_arch_data): New macro.
(elf_x86_64_adjust_dynamic_symbol): Use GET_PLT_ENTRY_SIZE.
(elf_x86_64_allocate_dynrelocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_plt_sym_val): Likewise.
(elf_x86_64_finish_dynamic_symbol): Use elf_x86_64_backend_data
parameters for PLT details.
(elf_x86_64_finish_dynamic_sections): Likewise.
Mike Frysinger
Doug Evans
gdbadmin
Alan Modra
Doug Kwan
Roland McGrath
Jan Kratochvil
Tom Tromey
Joel Brobecker
Gary Benson
Matthew Gretton-Dann
Pierre Muller
Jonathan Larmour
Ian Lance Taylor
Rainer Orth
Yao Qi
Thomas Schwinge