This adds more styling to the disassemble command. In particular,
addresses and function names in the disassembly are now styled.
This required fixing a small latent bug in set_output_style. This
function always passed NULL to emit_style_escape; but when writing to
a file other than gdb_stdout, it should emit the style escape
directly. (FWIW this is another argument for better integrating the
pager with ui_file and getting rid of this entire layer.)
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* utils.c (set_output_style): Sometimes pass stream to
emit_style_escape.
* ui-out.h (class ui_out) <can_emit_style_escape>: Declare.
* record-btrace.c (btrace_insn_history): Update.
* mi/mi-out.h (class mi_ui_out) <can_emit_style_escape>: New
method.
* disasm.h (gdb_pretty_print_disassembler): Add uiout parameter.
Update initializers.
<m_uiout>: New field.
<m_di>: Move lower.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Remove "uiout" parameter.
(dump_insns): Update.
* cli-out.h (class cli_ui_out) <can_emit_style_escape>: Declare.
* cli-out.c (cli_ui_out::can_emit_style_escape): New method.
gdb/testsuite/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add disassemble test.
* gdb.base/style.c (some_called_function): New function.
(main): Use it.
build_address_symbolic contains some code which causes it to
prefer the minsym over the the function symbol in certain cases.
The cases where this occurs are the same as the "certain pathological
cases" that used to exist in find_frame_funname().
This commit largely disables that code; it will only prefer the
minsym when the address of minsym is identical to that of the address
under consideration AND the function address for the symbtab sym is
not the same as the address under consideration.
So, without this change, when using the dw2-ranges-func-lo-cold
executable from the gdb.dwarf2/dw2-ranges-func.exp test, GDB exhibits
the following behavior:
(gdb) x/5i foo_cold
0x40110d <foo+4294967277>: push %rbp
0x40110e <foo+4294967278>: mov %rsp,%rbp
0x401111 <foo+4294967281>: callq 0x401106 <baz>
0x401116 <foo+4294967286>: nop
0x401117 <foo+4294967287>: pop %rbp
On the other hand, still without this change, using the
dw2-ranges-func-hi-cold executable from the same test, GDB
does this instead:
(gdb) x/5i foo_cold
0x401128 <foo_cold>: push %rbp
0x401129 <foo_cold+1>: mov %rsp,%rbp
0x40112c <foo_cold+4>: callq 0x401134 <baz>
0x401131 <foo_cold+9>: nop
0x401132 <foo_cold+10>: pop %rbp
This is inconsistent behavior. When foo_cold is at a lower
address than the function's entry point, the symtab symbol (foo)
is displayed along with a large positive offset which would wrap
around the address space if the address space were only 32 bits wide.
(A later patch fixes this problem by displaying negative offsets.)
This commit makes the behavior uniform for both the "lo-cold" and
"hi-cold" cases:
lo-cold:
(gdb) x/5i foo_cold
0x40110d <foo_cold>: push %rbp
0x40110e <foo-18>: mov %rsp,%rbp
0x401111 <foo-15>: callq 0x401106 <baz>
0x401116 <foo-10>: nop
0x401117 <foo-9>: pop %rbp
hi-cold:
(gdb) x/5i foo_cold
0x401128 <foo_cold>: push %rbp
0x401129 <foo+35>: mov %rsp,%rbp
0x40112c <foo+38>: callq 0x401134 <baz>
0x401131 <foo+43>: nop
0x401132 <foo+44>: pop %rbp
In both cases, the symbol shown for the address at which foo_cold
resides is shown as <foo_cold>. Subsequent offsets are shown as
either negative or positive offsets from the entry pc for foo.
When disassembling a function, care must be taken to NOT display
<+0> as the offset for the second range. For this reason, I found
it necessary to add the "prefer_sym_over_minsym" parameter to
build_address_symbolic. The type of this flag is a bool; do_demangle
ought to be a bool also, so I made this change at the same time.
gdb/ChangeLog:
* valprint.h (build_address_symbolic): Add "prefer_sym_over_minsym"
parameter. Change type of "do_demangle" to bool.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Pass suitable "prefer_sym_over_minsym" flag to
build_address_symbolic(). Don't output "+" for negative offsets.
* printcmd.c (print_address_symbolic): Update invocation of
build_address_symbolic to include a "prefer_sym_over_minsym"
flag.
(build_address_symbolic): Add "prefer_sym_over_minsym" parameter.
Restrict cases in which use of minimal symbol is preferred to that
of a found symbol. Update comments.
This adds field_unsigned and changes various places using field_fmt
with "%u" to use this instead. This also replaces an existing
equivalent helper function in record-btrace.c.
2019-07-15 Tom Tromey <tromey@adacore.com>
* mi/mi-out.h (class mi_ui_out) <do_field_unsigned>: Declare.
* mi/mi-out.c (mi_ui_out::do_field_unsigned): New method.
* cli-out.h (class cli_ui_out) <do_field_unsigned>: Declare.
* cli-out.c (cli_ui_out::do_field_int): New method.
* ui-out.c (ui_out::field_unsigned): New method.
* symfile.c (generic_load): Use field_unsigned.
(print_transfer_performance): Likewise.
* record-btrace.c (ui_out_field_uint): Remove.
(btrace_call_history_insn_range, btrace_call_history): Use
field_unsigned.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Use
field_unsigned.
* ui-out.h (class ui_out) <field_unsigned>: New method.
<do_field_unsigned>: Likewise.
I noticed recently that some command had a trailing newline in its
"help" output. So, I temporarily hacked cli-decode.c to print
something when a new command was installed that had a trailing newline
in its help message, and wrote this patch, which removes all the ones
I could find this way. (There could still be a few more in *-nat
files.)
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-11 Tom Tromey <tromey@adacore.com>
* infcall.c (_initialize_infcall): Remove trailing newline from
help.
* user-regs.c (_initialize_user_regs): Remove trailing newline
from help.
* typeprint.c (_initialize_typeprint): Remove trailing newline
from help.
* reverse.c (_initialize_reverse): Remove trailing newlines from
help.
* tracepoint.c (_initialize_tracepoint): Remove trailing newlines
from help.
* language.c (add_set_language_command): Remove trailing newline
from help.
* infcmd.c (_initialize_infcmd): Remove trailing newlines from
help.
* disasm.c (_initialize_disasm): Remove trailing newline from
help.
* top.c (init_main): Remove trailing newline from help.
* interps.c (_initialize_interpreter): Remove trailing newline
from help.
* btrace.c (_initialize_btrace): Remove trailing newlines from
help.
* breakpoint.c (_initialize_breakpoint): Remove trailing newline
from help.
* python/python.c (_initialize_python): Remove trailing newline
from help.
* spu-tdep.c (_initialize_spu_tdep): Remove trailing newlines from
help.
* tui/tui-win.c (_initialize_tui_win): Remove trailing newlines
from help. Reformat some text.
* tui/tui-stack.c (_initialize_tui_stack): Remove trailing newline
from help.
* tui/tui-layout.c (_initialize_tui_layout): Remove trailing
newline from help.
Fix up all failures encountered when running the testsuite with
GDB_DEBUG="infrun".
Some tests rely on enabling debugging for various components. With
debugging on, this will be lost to the debug file.
Disable separate tty for mi tests when debugging. This currently
does not work.
disasm.c should send errors to the stderr instead of the logfile.
Note that enabling debug for other components might still cause
additional errors above what has been fixed here.
gdb/ChangeLog:
* disasm.c (set_disassembler_options): Send errors to stderr.
gdb/testsuite/ChangeLog:
* gdb.base/breakpoint-in-ro-region.exp: Disable when debugging.
* gdb.base/debug-expr.exp: Likewise.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/fork-print-inferior-events.exp: Likewise.
* gdb.base/gdb-sigterm.exp: Likewise.
* gdb.base/gdbinit-history.exp: Likewise.
* gdb.base/osabi.exp: Likewise.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
* gdb.base/ui-redirect.exp: Likewise.
* gdb.gdb/unittest.exp: Likewise.
* gdb.mi/mi-break.exp: Disable separate-mi-tty when debugging.
* gdb.mi/mi-watch.exp: Likewise.
* gdb.mi/new-ui-mi-sync.exp: Likewise.
* gdb.mi/user-selected-context-sync.exp: Likewise.
* gdb.python/python.exp: Disable debug test when debugging.
* gdb.threads/check-libthread-db.exp: Disable when debugging.
* gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
Likewise.
* gdb.threads/stepi-random-signal.exp: Likewise.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This adds some output styling to the CLI.
A style is currently a foreground color, a background color, and an
intensity (dim or bold). (This list could be expanded depending on
terminal capabilities.)
A style can be applied while printing. For ui-out, this is done by
passing the style constant as an argument. For low-level cases,
fprintf_styled and fputs_styled are provided.
Users can control the style via a number of new set/show commands. In
the interest of not typing many nearly-identical documentation
strings, I automated this. On the down side, this is not very
i18n-friendly.
I've chose some default colors to use. I think it would be good to
enable this by default, so that when users start the new gdb, they
will see the new feature.
Stylizing is done if TERM is set and is not "dumb". This could be
improved when the TUI is available by using the curses has_colors
call. That is, the lowest layer could call this without committing to
using curses everywhere; see my other patch for TUI colorizing.
I considered adding a new "set_style" method to ui_file. However,
because the implementation had to interact with the pager code, I
didn't take this approach. But, one idea might be to put the isatty
check there and then have it defer to the lower layers.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.h (set_output_style, fprintf_styled)
(fputs_styled): Declare.
* utils.c (applied_style, desired_style): New globals.
(emit_style_escape, set_output_style): New function.
(prompt_for_continue): Emit style escapes.
(fputs_maybe_filtered): Likewise.
(fputs_styled, fprintf_styled): New functions.
* ui-out.h (enum class ui_out_style_kind): New.
(class ui_out) <field_string, field_stream, do_field_string>: Add
style parameter.
* ui-out.c (ui_out::field_stream, ui_out::field_string): Add style
parameter.
* tui/tui-out.h (class tui_ui_out) <do_field_string>: Add style
parameter.
* tui/tui-out.c (tui_ui_out::do_field_string): Add style
parameter.
(tui_ui_out::do_field_string): Update.
* tracepoint.c (print_one_static_tracepoint_marker): Style
output.
* stack.c (print_frame_info, print_frame): Style output.
* source.c (print_source_lines_base): Style output.
* skip.c (info_skip_command): Style output.
* record-btrace.c (btrace_call_history_src_line): Style output.
(btrace_call_history): Likewise.
* python/py-framefilter.c (py_print_frame): Style output.
* mi/mi-out.h (class mi_ui_out) <do_field_string>: Add style
parameter.
* mi/mi-out.c (mi_ui_out::do_table_header)
(mi_ui_out::do_field_int): Update.
(mi_ui_out::do_field_string): Update.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Style output.
* cli/cli-style.h: New file.
* cli/cli-style.c: New file.
* cli-out.h (class cli_ui_out) <do_field_string>: Add style
parameter.
* cli-out.c (cli_ui_out::do_table_header)
(cli_ui_out::do_field_int, cli_ui_out::do_field_skip): Update.
(cli_ui_out::do_field_string): Add style parameter. Style the
output.
* breakpoint.c (print_breakpoint_location): Style output.
(update_static_tracepoint): Likewise.
* Makefile.in (SUBDIR_CLI_SRCS): Add cli-style.c.
(HFILES_NO_SRCDIR): Add cli-style.h.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: New file.
* gdb.base/style.c: New file.
This fixes all the straightforward -Wshadow=local warnings in gdb. A
few standard approaches are used here:
* Renaming an inner (or outer, but more commonly inner) variable;
* Lowering a declaration to avoid a clash;
* Moving a declaration into a more inner scope to avoid a clash,
including the special case of moving a declaration into a loop header.
I did not consider any of the changes in this patch to be particularly
noteworthy, though of course they should all still be examined.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* ctf.c (SET_ARRAY_FIELD): Rename "u32".
* p-valprint.c (pascal_val_print): Split inner "i" variable.
* xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
header.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
more inner scope.
* xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
* varobj.c (varobj_update): Rename inner "newobj",
"type_changed".
* valprint.c (generic_emit_char): Rename inner "buf".
* valops.c (find_overload_match): Rename inner "temp".
(value_struct_elt_for_reference): Declare "v" in more inner
scope.
* v850-tdep.c (v850_push_dummy_call): Rename "len".
* unittests/array-view-selftests.c (run_tests): Rename inner
"vec".
* tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
header.
* tracepoint.c (merge_uploaded_trace_state_variables): Declare
"tsv" in more inner scope.
(print_one_static_tracepoint_marker): Rename inner
"tuple_emitter".
* tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
(tic6x_push_dummy_call): Don't redeclare "addr".
* target-float.c: Declare "dto" lower.
* symtab.c (lookup_local_symbol): Rename inner "sym".
(find_pc_sect_line): Rename inner "pc".
* stack.c (print_frame): Don't redeclare "gdbarch".
(return_command): Rename inner "gdbarch".
* s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
"sp".
* rust-lang.c (rust_internal_print_type): Declare "i" in loop
header.
* rs6000-tdep.c (ppc_process_record): Rename inner "addr".
* riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
scope.
* remote.c (remote_target::update_thread_list): Don't redeclare
"tp".
(remote_target::process_initial_stop_replies): Rename inner
"thread".
(remote_target::remote_parse_stop_reply): Don't redeclare "p".
(remote_target::wait_as): Don't redeclare "stop_reply".
(remote_target::get_thread_local_address): Rename inner
"result".
(remote_target::get_tib_address): Likewise.
I typed this:
(gdb) help set disassembler-options
Set the disassembler options.
Usage: set disassembler-options OPTION [,OPTION]...
See: 'show disassembler-options' for valid option values.
... so I tried what it said and got:
(gdb) show disassembler-options
The current disassembler options are ''
This surprised me a little, so this patch adds some text to explain
the situation when an architecture does not have disassembler options.
While there I noticed one more spot where gdb was not using the GNU
style for metasyntactic variables. This patch fixes this as well.
gdb/ChangeLog
2018-09-16 Tom Tromey <tom@tromey.com>
* disasm.c (show_disassembler_options_sfunc): Use GNU style for
metasyntactic variables. Print message if no disassembler options
are available.
Implement MIPS target support for passing options to the disassembler,
complementing commit 65b48a8140 ("GDB: Add support for the new
set/show disassembler-options commands.").
This includes options that expect an argument, so adjust the generic
code and data structures used so as to handle such options. So as to
give backends syntax flexibility no specific delimiter has been defined
to separate options from their respective arguments, so it has to be
included as the last character of the option name. Completion code
however has not been adjusted and consequently option arguments cannot
be completed at this time.
Also the MIPS target has non-empty defaults for the options, so that ABI
names for the general-purpose registers respect our `set mips abi ...'
setting rather than always being determined from the ELF headers of the
binary file selected. Handle these defaults as implicit options, never
shown to the user and always prepended to the user-specified options, so
that the latters can override the defaults.
The resulting output for the MIPS target is as follows:
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
no-aliases Use canonical instruction forms.
msa Recognize MSA instructions.
virt Recognize the virtualization ASE instructions.
xpa Recognize the eXtended Physical Address (XPA) ASE
instructions.
ginv Recognize the Global INValidate (GINV) ASE instructions.
gpr-names=ABI Print GPR names according to specified ABI.
Default: based on binary being disassembled.
fpr-names=ABI Print FPR names according to specified ABI.
Default: numeric.
cp0-names=ARCH Print CP0 register names according to specified architecture.
Default: based on binary being disassembled.
hwr-names=ARCH Print HWR names according to specified architecture.
Default: based on binary being disassembled.
reg-names=ABI Print GPR and FPR names according to specified ABI.
reg-names=ARCH Print CP0 register and HWR names according to specified
architecture.
For the options above, the following values are supported for "ABI":
numeric 32 n32 64
For the options above, the following values are supported for "ARCH":
numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600
r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000
r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64
mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e
loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp
(gdb)
which corresponds to what `objdump --help' used to print for the MIPS
target, with minor formatting changes, most notably option argument
lists being wrapped, but also the amount of white space separating
options from the respective descriptions. The relevant part the new
code is now also used by `objdump --help', which means these formatting
changes apply to both outputs, except for argument list wrapping, which
is GDB-specific.
This also adds a separating new line between the heading and option
lists where descriptions are provided, hence:
(gdb) set architecture s390:31-bit
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
esa Disassemble in ESA architecture mode
zarch Disassemble in z/Architecture mode
insnlength Print unknown instructions according to length from first two bits
(gdb)
but:
(gdb) set architecture powerpc:common
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl,
821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300,
e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5,
power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge,
ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe,
spe2, titan, vle, vsx
(gdb)
Existing affected target backends have been adjusted accordingly.
This has been verified manually with:
(gdb) set architecture arm
(gdb) set architecture powerpc:common
(gdb) set architecture s390:31-bit
to cause no issues with the `show disassembler-options' and `set
disassembler-options' commands. A test case for the MIPS target has
also been provided, covering the default settings with ABI overrides as
well as disassembler option overrides.
2018-07-02 Maciej W. Rozycki <macro@mips.com>
Simon Marchi <simon.marchi@polymtl.ca>
include/
PR tdep/8282
* dis-asm.h (disasm_option_arg_t): New typedef.
(disasm_options_and_args_t): Likewise.
(disasm_options_t): Add `arg' member, document members.
(disassembler_options_mips): New prototype.
(disassembler_options_arm, disassembler_options_powerpc)
(disassembler_options_s390): Update prototypes.
opcodes/
PR tdep/8282
* mips-dis.c (mips_option_arg_t): New enumeration.
(mips_options): New variable.
(disassembler_options_mips): New function.
(print_mips_disassembler_options): Reimplement in terms of
`disassembler_options_mips'.
* arm-dis.c (disassembler_options_arm): Adapt to using the
`disasm_options_and_args_t' structure.
* ppc-dis.c (disassembler_options_powerpc): Likewise.
* s390-dis.c (disassembler_options_s390): Likewise.
gdb/
PR tdep/8282
* disasm.h (gdb_disassembler): Add
`m_disassembler_options_holder'. member
* disasm.c (get_all_disassembler_options): New function.
(gdb_disassembler::gdb_disassembler): Use it.
(gdb_buffered_insn_length_init_dis): Likewise.
(gdb_buffered_insn_length): Adjust accordingly.
(set_disassembler_options): Handle options with arguments.
(show_disassembler_options_sfunc): Likewise. Add a leading new
line if showing options with descriptions.
(disassembler_options_completer): Adapt to using the
`disasm_options_and_args_t' structure.
* mips-tdep.c (mips_disassembler_options): New variable.
(mips_disassembler_options_o32): Likewise.
(mips_disassembler_options_n32): Likewise.
(mips_disassembler_options_n64): Likewise.
(gdb_print_insn_mips): Don't set `disassembler_options'.
(gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove
functions.
(mips_gdbarch_init): Always set `gdbarch_print_insn' to
`gdb_print_insn_mips'. Set `gdbarch_disassembler_options',
`gdbarch_disassembler_options_implicit' and
`gdbarch_valid_disassembler_options'.
* arm-tdep.c (_initialize_arm_tdep): Adapt to using the
`disasm_options_and_args_t' structure.
* gdbarch.sh (disassembler_options_implicit): New `gdbarch'
method.
(valid_disassembler_options): Switch from `disasm_options_t' to
the `disasm_options_and_args_t' structure.
* NEWS: Document `set disassembler-options' support for the MIPS
target.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
gdb/doc/
PR tdep/8282
* gdb.texinfo (Source and Machine Code): Document `set
disassembler-options' support for the MIPS target.
gdb/testsuite/
PR tdep/8282
* gdb.arch/mips-disassembler-options.exp: New test.
* gdb.arch/mips-disassembler-options.s: New test source.
This changes two out parameters of build_address_symbolic to be
std::string, and updates the callers. This allows removing some
cleanups.
This patch also moves the declaration of build_address_symbolic out of
defs.h. I think that many things in defs.h should be elsewhere
instead. In this case, I moved the declaration to valprint.h, becuase
there is no "printcmd.h" -- but perhaps it would be better to
introduce that instead.
Tested by the buildbot.
gdb/ChangeLog
2018-06-07 Tom Tromey <tom@tromey.com>
* valprint.h (build_address_symbolic): Declare.
* printcmd.c (print_address_symbolic): Update.
(build_address_symbolic): Change "name" and "filename" to
std::string.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Update.
* defs.h (build_address_symbolic): Remove declaration.
This changes some help text in disasm.c to follow the GNU style.
2018-04-29 Tom Tromey <tom@tromey.com>
* disasm.c (_initialize_disasm): Update help text.
This changes the remaining spots in disasm.c to use the RAII ui-out
emitters, removing a few cleanups. This also fixes a regression that
Simon pointed out.
2017-10-17 Tom Tromey <tom@tromey.com>
* disasm.c (do_mixed_source_and_assembly_deprecated): Use
gdb::optional, ui_out_emit_list, ui_out_emit_tuple.
(do_mixed_source_and_assembly): Likewise.
This renames a few functions -- skip_spaces_const,
skip_to_space_const, get_number_const, extract_arg_const -- to drop
the "_const" suffix and instead rely on overloading.
This makes future const fixes simpler by reducing the number of lines
that must be changed. I think it is also not any less clear, as all
these functions have the same interface as their non-const versions by
design. Furthermore there's an example of using an overload in-tree
already, namely check_for_argument.
This patch was largely created using some perl one-liners; then a few
fixes were applied by hand.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* common/common-utils.h (skip_to_space): Remove macro, redeclare
as function.
(skip_to_space): Rename from skip_to_space_const.
* common/common-utils.c (skip_to_space): New function.
(skip_to_space): Rename from skip_to_space_const.
* cli/cli-utils.h (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
* cli/cli-utils.c (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
(number_or_range_parser::get_number): Use ::get_number.
* aarch64-linux-tdep.c, ada-lang.c, arm-linux-tdep.c, ax-gdb.c,
break-catch-throw.c, breakpoint.c, cli/cli-cmds.c, cli/cli-dump.c,
cli/cli-script.c, cli/cli-setshow.c, compile/compile.c,
completer.c, demangle.c, disasm.c, findcmd.c, linespec.c,
linux-tdep.c, linux-thread-db.c, location.c, mi/mi-parse.c,
minsyms.c, nat/linux-procfs.c, printcmd.c, probe.c,
python/py-breakpoint.c, record.c, rust-exp.y, serial.c, stack.c,
stap-probe.c, tid-parse.c, tracepoint.c: Update all callers.
This changes one spot in disasm.c to use ui_out_emit_tuple. This
patch required a large reindentation, so I've separated it out.
ChangeLog
2017-09-09 Tom Tromey <tom@tromey.com>
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Use
ui_out_emit_tuple.
For some reason I ended up staring at some of the "int flags" in
btrace-related code, and I got confused because I had no clue what the
flags where supposed to indicate.
Fix that by using enum_flags, so that:
#1 - it's clear from the type what the flags are about, and
#2 - the compiler can catch mismatching mistakes
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (print_disassembly, disassemble_current_function)
(disassemble_command): Use gdb_disassembly_flags instead of bare
int.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn)
(dump_insns, do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly, do_assembly_only, gdb_disassembly):
Use gdb_disassembly_flags instead of bare int.
* disasm.h (DISASSEMBLY_SOURCE_DEPRECATED, DISASSEMBLY_RAW_INSN)
(DISASSEMBLY_OMIT_FNAME, DISASSEMBLY_FILENAME)
(DISASSEMBLY_OMIT_PC, DISASSEMBLY_SOURCE)
(DISASSEMBLY_SPECULATIVE): No longer macros. Instead they're...
(enum gdb_disassembly_flag): ... values of this new enumeration.
(gdb_disassembly_flags): Define.
(gdb_disassembly)
(gdb_pretty_print_disassembler::pretty_print_insn): Use it.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Use
gdb_disassembly_flags instead of bare int.
* record-btrace.c (btrace_insn_history)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from): Use gdb_disassembly_flags
instead of bare int.
* record.c (get_insn_history_modifiers, cmd_record_insn_history):
Use gdb_disassembly_flags instead of bare int.
* target-debug.h (target_debug_print_gdb_disassembly_flags):
Define.
* target-delegates.c: Regenerate.
* target.c (target_insn_history, target_insn_history_from)
(target_insn_history_range): Use gdb_disassembly_flags instead of
bare int.
* target.h: Include "disasm.h".
(struct target_ops) <to_insn_history, to_insn_history_from,
to_insn_history_range>: Use gdb_disassembly_flags instead of bare
int.
(target_insn_history, target_insn_history_from)
(target_insn_history_range): Use gdb_disassembly_flags instead of
bare int.
This patch reworks the whole completion machinery, and prepares it
for later enhancements.
Adds a new "completion_tracker" class that is meant to hold everything
about the state of the current completion operation.
This class now has the responsibility of tracking the list of
completion matches, and checking whether the max completions limit has
been reached. You can look at this as this patch starting out by
C++fying the existing "completion_tracker" in symtab.c (it's just an
htab_t typedef currently), moving it to completer.h/c, and then making
it a class/generalizing/enhancing it.
Unlike with the current tracking, completion_tracker now checks
whether the limit has been reached on each completion match list
insertion. This both simplifies the max-completions handling code
(maybe_add_completion_enum is gone, for example), and is a
prerequisite for follow up patches.
The current completion_tracker is only used for symbol completions,
and the symbol code gets at the current instance via globals. This
patch cleans that up by adding a completion_tracker reference to the
signature of the completion functions, and passing the tracker around
everywhere necessary.
Then, the patch changes how the completion match list is handed over
to readline. Currently, we're using the rl_completion_entry_function
readline entry point, and the patch switches to
rl_attempted_completion_function. A following patch will want to let
GDB itself decide the common completion prefix between all matches
(what readline calls the "lowest common denominator"), instead of
having readline compute it, and that's not possible with the
rl_completion_entry_function entry point. Also,
rl_attempted_completion_function lets GDB hand over the match list to
readline as an array in one go instead of passing down matches one by
one, so from that angle it's a nicer entry point anyway.
Lastly, the patch catches exceptions around the readline entry points,
because we can't let C++ exceptions cross readline. We handle that in
the readline input entry point, but the completion entry point isn't
guarded, so GDB can abort if completion throws. E.g., in current
master:
(gdb) b -function "fun<tab>
terminate called after throwing an instance of 'gdb_exception_RETURN_MASK_ERROR'
Aborted (core dumped)
This patch fixes that. This will be exercised in the new tests added
later on in the series.
gdb/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* ada-lang.c (symbol_completion_match): Adjust comments.
(symbol_completion_add): Replace vector parameter with
completion_tracker parameter. Use it.
(ada_make_symbol_completion_list): Rename to...
(ada_collect_symbol_completion_matches): ... this. Add
completion_tracker parameter and use it.
(ada_language_defn): Adjust.
* break-catch-syscall.c (catch_syscall_completer): Adjust
prototype and work with completion_tracker instead of VEC.
* breakpoint.c (condition_completer): Adjust prototype and work
with completion_tracker instead of VEC.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Adjust to renames.
* cli/cli-cmds.c (complete_command): Rework using
completion_tracker. Catch exceptions when completing.
* cli/cli-decode.c (integer_unlimited_completer)
(complete_on_cmdlist, complete_on_enum): Adjust prototype and work
with completion_tracker instead of VEC.
* command.h (struct completion_tracker): Forward declare.
(completer_ftype, completer_handle_brkchars_ftype): Change
types.
(complete_on_cmdlist, complete_on_enum): Adjust.
* completer.c: Include <algorithm>.
(struct gdb_completer_state): New.
(current_completion): New global.
(readline_line_completion_function): Delete.
(noop_completer, filename_completer)
(filename_completer_handle_brkchars, complete_files_symbols)
(linespec_location_completer): Adjust to work with a
completion_tracker instead of a VEC.
(string_or_empty): New.
(collect_explicit_location_matches): Adjust to work with a
completion_tracker instead of a VEC.
(explicit_location_completer): Rename to ...
(complete_explicit_location): ... this and adjust to work with a
completion_tracker instead of a VEC.
(location_completer): Adjust to work with a completion_tracker
instead of a VEC.
(add_struct_fields): Adjust to work with a completion_list instead
of VEC.
(expression_completer): Rename to ...
(complete_expression): ... this and adjust to work with a
completion_tracker instead of a VEC. Use complete_files_symbols.
(expression_completer): Reimplement on top of complete_expression.
(symbol_completer): Adjust to work with a completion_tracker
instead of a VEC.
(enum complete_line_internal_reason): Add describing comments.
(complete_line_internal_normal_command): Adjust to work with a
completion_tracker instead of a VEC.
(complete_line_internal): Rename to ...
(complete_line_internal_1): ... this and adjust to work with a
completion_tracker instead of a VEC. Assert TEXT is NULL in the
handle_brkchars phase.
(new_completion_tracker): Delete.
(complete_line_internal): Reimplement as TRY/CATCH wrapper around
complete_line_internal_1.
(free_completion_tracker): Delete.
(INITIAL_COMPLETION_HTAB_SIZE): New.
(completion_tracker::completion_tracker)
(completion_tracker::~completion_tracker): New.
(maybe_add_completion): Delete.
(completion_tracker::maybe_add_completion)
(completion_tracker::add_completion)
(completion_tracker::add_completions): New.
(throw_max_completions_reached_error): Delete.
(complete_line): Adjust to work with a completion_tracker instead
of a VEC. Don't create a completion_tracker_t or check for max
completions here.
(command_completer, command_completer_handle_brkchars)
(signal_completer, reg_or_group_completer_1)
(reg_or_group_completer, default_completer_handle_brkchars):
Adjust to work with a completion_tracker.
(gdb_completion_word_break_characters_throw): New.
(gdb_completion_word_break_characters): Reimplement.
(line_completion_function): Delete.
(completion_tracker::recompute_lowest_common_denominator)
(expand_preserving_ws)
(completion_tracker::build_completion_result)
(completion_result::completion_result)
(completion_result::completion_result)
(completion_result::~completion_result)
(completion_result::completion_result)
(completion_result::release_match_list, compare_cstrings)
(completion_result::sort_match_list)
(completion_result::reset_match_list)
(gdb_rl_attempted_completion_function_throw)
(gdb_rl_attempted_completion_function): New.
* completer.h (completion_list, struct completion_result)
(class completion_tracker): New.
(complete_line): Add completion_tracker parameter.
(readline_line_completion_function): Delete.
(gdb_rl_attempted_completion_function): New.
(noop_completer, filename_completer, expression_completer)
(location_completer, symbol_completer, command_completer)
(signal_completer, reg_or_group_completer): Update prototypes.
(completion_tracker_t, new_completion_tracker)
(make_cleanup_free_completion_tracker): Delete.
(enum maybe_add_completion_enum): Delete.
(maybe_add_completion): Delete.
(throw_max_completions_reached_error): Delete.
* corefile.c (complete_set_gnutarget): Adjust to work with a
completion_tracker instead of a VEC.
* cp-abi.c (cp_abi_completer): Adjust to work with a
completion_tracker instead of a VEC.
* d-lang.c (d_language_defn): Adjust.
* disasm.c (disassembler_options_completer): Adjust to work with a
completion_tracker instead of a VEC.
* f-lang.c (f_make_symbol_completion_list): Rename to ...
(f_collect_symbol_completion_matches): ... this. Adjust to work
with a completion_tracker instead of a VEC.
(f_language_defn): Adjust.
* go-lang.c (go_language_defn): Adjust.
* guile/scm-cmd.c (cmdscm_add_completion, cmdscm_completer):
Adjust to work with a completion_tracker instead of a VEC.
* infrun.c (handle_completer): Likewise.
* interps.c (interpreter_completer): Likewise.
* interps.h (interpreter_completer): Likewise.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Adjust.
* language.h (language_defn::la_make_symbol_completion_list):
Rename to ...
(language_defn::la_collect_symbol_completion_matches): ... this
and adjust to work with a completion_tracker instead of a VEC.
* m2-lang.c (m2_language_defn): Adjust.
* objc-lang.c (objc_language_defn): Adjust.
* opencl-lang.c (opencl_language_defn): Adjust.
* p-lang.c (pascal_language_defn): Adjust.
* python/py-cmd.c (cmdpy_completer_helper): Handle NULL word.
(cmdpy_completer_handle_brkchars, cmdpy_completer): Adjust to work
with a completion_tracker.
* rust-lang.c (rust_language_defn): Adjust.
* symtab.c (free_completion_list, do_free_completion_list)
(return_val, completion_tracker): Delete.
(completion_list_add_name, completion_list_add_symbol)
(completion_list_add_msymbol, completion_list_objc_symbol)
(completion_list_add_fields, add_symtab_completions): Add
completion_tracker parameter and use it.
(default_make_symbol_completion_list_break_on_1): Rename to...
(default_collect_symbol_completion_matches_break_on): ... this.
Add completion_tracker parameter and use it instead of allocating
a completion tracker here.
(default_make_symbol_completion_list_break_on): Delete old
implementation.
(default_make_symbol_completion_list): Delete.
(default_collect_symbol_completion_matches): New.
(make_symbol_completion_list): Delete.
(collect_symbol_completion_matches): New.
(make_symbol_completion_type): Rename to ...
(collect_symbol_completion_matches_type): ... this. Add
completion_tracker parameter and use it instead of VEC.
(make_file_symbol_completion_list_1): Rename to...
(collect_file_symbol_completion_matches): ... this. Add
completion_tracker parameter and use it instead of VEC.
(make_file_symbol_completion_list): Delete.
(add_filename_to_list): Use completion_list instead of a VEC.
(add_partial_filename_data::list): Now a completion_list.
(make_source_files_completion_list): Work with a completion_list
instead of a VEC.
* symtab.h: Include "completer.h".
(default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type, make_file_symbol_completion_list)
(make_source_files_completion_list): Delete.
(default_collect_symbol_completion_matches_break_on)
(default_collect_symbol_completion_matches)
(collect_symbol_completion_matches)
(collect_symbol_completion_matches_type)
(collect_file_symbol_completion_matches)
(make_source_files_completion_list): New.
* top.c (init_main): Don't install a rl_completion_entry_function
hook. Install a rl_attempted_completion_function hook instead.
* tui/tui-layout.c (layout_completer): Adjust to work with a
completion_tracker.
* tui/tui-regs.c (tui_reggroup_completer):
* tui/tui-win.c (window_name_completer, focus_completer)
(winheight_completer): Adjust to work with a completion_tracker.
* value.c: Include "completer.h".
(complete_internalvar): Adjust to work with a completion_tracker.
* value.h (complete_internalvar): Likewise.
This changes some spots to use ui_out_emit_list. This only touches
"easy" cases, where the cleanup was used in a block-structured way.
There's also one more use of ui_out_emit_tuple in here.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Use
ui_out_emit_list.
* stack.c (print_frame): Use ui_out_emit_list.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_list.
* mi/mi-main.c (print_one_inferior)
(mi_cmd_data_list_register_names)
(mi_cmd_data_list_register_values, mi_cmd_list_features)
(mi_cmd_list_target_features, mi_cmd_trace_frame_collected): Use
ui_out_emit_list.
* mi/mi-interp.c (mi_on_normal_stop_1): Use ui_out_emit_list.
(mi_output_solib_attribs): Use ui_out_emit_list,
ui_out_emit_tuple.
* mi/mi-cmd-var.c (varobj_update_one): Use ui_out_emit_list.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
(mi_cmd_stack_list_args, list_args_or_locals): Use
ui_out_emit_list.
* disasm.c (do_assembly_only): Use ui_out_emit_list.
* breakpoint.c (print_solib_event, output_thread_groups): Use
ui_out_emit_list.
This patch changes various places to use ui_out_emit_tuple,
eliminating a number of cleanups. This patch only tackles "easy"
cases, which are ones where the cleanups in question were
block-structured and did not involve any changes other than the
obvious replacement.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* record-btrace.c (record_btrace_insn_history)
(record_btrace_insn_history_range, record_btrace_call_history)
(record_btrace_call_history_range): Use ui_out_emit_tuple.
* thread.c (do_captured_list_thread_ids, print_thread_info_1): Use
ui_out_emit_tuple.
* stack.c (print_frame_info): Use ui_out_emit_tuple.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_tuple.
* skip.c (skip_info): Use ui_out_emit_tuple.
* remote.c (show_remote_cmd): Use ui_out_emit_tuple.
* progspace.c (print_program_space): Use ui_out_emit_tuple.
* probe.c (info_probes_for_ops): Use ui_out_emit_tuple.
* osdata.c (info_osdata): Use ui_out_emit_tuple.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_tuple.
* mi/mi-main.c (print_one_inferior, list_available_thread_groups)
(output_register, mi_cmd_data_read_memory)
(mi_cmd_data_read_memory_bytes, mi_load_progress)
(mi_cmd_trace_frame_collected): Use ui_out_emit_tuple.
* mi/mi-cmd-var.c (mi_cmd_var_list_children, varobj_update_one):
Use ui_out_emit_tuple.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Use
ui_out_emit_tuple.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions)
(mi_cmd_info_gdb_mi_command): Use ui_out_emit_tuple.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_tuple.
* inferior.c (print_inferior): Use ui_out_emit_tuple.
* gdb_bfd.c (print_one_bfd): Use ui_out_emit_tuple.
* disasm.c (do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly): Use ui_out_emit_tuple.
* cp-abi.c (list_cp_abis): Use ui_out_emit_tuple.
* cli/cli-setshow.c (cmd_show_list): Use ui_out_emit_tuple.
* breakpoint.c (print_one_breakpoint_location)
(print_one_breakpoint): Use ui_out_emit_tuple.
* auto-load.c (print_script, info_auto_load_cmd): Use
ui_out_emit_tuple.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_tuple.
The memory disassemble_info::disassembler_options points to is always
owned by the client. I.e., that field is an non-owning, observing
pointer. Thus const makes sense.
Are the include/ and opcodes/ bits OK?
Tested on x86_64 Fedora 23, built with --enable-targets=all.
include/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* dis-asm.h (disassemble_info) <disassembler_options>: Now a
"const char *".
(next_disassembler_option): Constify.
opcodes/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arc-dis.c (parse_option, parse_disassembler_options): Constify.
* arm-dis.c (parse_arm_disassembler_options): Constify.
* ppc-dis.c (powerpc_init_dialect): Constify local.
* vax-dis.c (parse_disassembler_options): Constify.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arm-tdep.c (show_disassembly_style_sfunc): Constify local.
* disasm.c (set_disassembler_options): Constify local.
* i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
This commit adds support to GDB so that it can modify the disassembler-options
value that is passed to the disassembler, similar to objdump's -M option.
Currently, the only supported targets are ARM, PowerPC and S/390, but
adding support for a new target(s) is not difficult.
include/
* dis-asm.h (disasm_options_t): New typedef.
(parse_arm_disassembler_option): Remove prototype.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(get_arm_regname_num_options): Likewise.
(disassemble_init_s390): New prototype.
(disassembler_options_powerpc): Likewise.
(disassembler_options_arm): Likewise.
(disassembler_options_s390): Likewise.
(remove_whitespace_and_extra_commas): Likewise.
(disassembler_options_cmp): Likewise.
(next_disassembler_option): New inline function.
(FOR_EACH_DISASSEMBLER_OPTION): New macro.
opcodes/
* disassemble.c Include "safe-ctype.h".
(disassemble_init_for_target): Handle s390 init.
(remove_whitespace_and_extra_commas): New function.
(disassembler_options_cmp): Likewise.
* arm-dis.c: Include "libiberty.h".
(NUM_ELEM): Delete.
(regnames): Use long disassembler style names.
Add force-thumb and no-force-thumb options.
(NUM_ARM_REGNAMES): Rename from this...
(NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE.
(get_arm_regname_num_options): Delete.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(parse_disassembler_options): Likewise.
(parse_arm_disassembler_option): Rename from this...
(parse_arm_disassembler_options): ...to this. Make static.
Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options.
(print_insn): Use parse_arm_disassembler_options.
(disassembler_options_arm): New function.
(print_arm_disassembler_options): Handle updated regnames.
* ppc-dis.c: Include "libiberty.h".
(ppc_opts): Add "32" and "64" entries.
(ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp.
(powerpc_init_dialect): Add break to switch statement.
Use new FOR_EACH_DISASSEMBLER_OPTION macro.
(disassembler_options_powerpc): New function.
(print_ppc_disassembler_options): Use ARRAY_SIZE.
Remove printing of "32" and "64".
* s390-dis.c: Include "libiberty.h".
(init_flag): Remove unneeded variable.
(struct s390_options_t): New structure type.
(options): New structure.
(init_disasm): Rename from this...
(disassemble_init_s390): ...to this. Add initializations for
current_arch_mask and option_use_insn_len_bits_p. Remove init_flag.
(print_insn_s390): Delete call to init_disasm.
(disassembler_options_s390): New function.
(print_s390_disassembler_options): Print using information from
struct 'options'.
* po/opcodes.pot: Regenerate.
binutils/
* objdump.c (main): Use remove_whitespace_and_extra_commas.
gdb/
* NEWS: Mention new set/show disassembler-options commands.
* doc/gdb.texinfo: Document new set/show disassembler-options commands.
* disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h".
(prospective_options): New static variable.
(gdb_disassembler::gdb_disassembler): Initialize
m_di.disassembler_options.
(gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options.
(get_disassembler_options): New function.
(set_disassembler_options): Likewise.
(set_disassembler_options_sfunc): Likewise.
(show_disassembler_options_sfunc): Likewise.
(disassembler_options_completer): Likewise.
(_initialize_disasm): Likewise.
* disasm.h (get_disassembler_options): New prototype.
(set_disassembler_options): Likewise.
* gdbarch.sh (gdbarch_disassembler_options): New variable.
(gdbarch_verify_disassembler_options): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* arm-tdep.c (num_disassembly_options): Delete.
(set_disassembly_style): Likewise.
(arm_disassembler_options): New static variable.
(set_disassembly_style_sfunc): Convert short style name into long
option name. Call set_disassembler_options.
(show_disassembly_style_sfunc): New function.
(arm_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
(_initialize_arm_tdep): Delete regnames variable and update callers.
(arm_disassembler_options): Initialize.
(disasm_options): New variable.
(num_disassembly_options): Rename from this...
(num_disassembly_styles): ...to this. Compute by scanning through
disasm_options.
(valid_disassembly_styles): Initialize using disasm_options.
Remove calls to parse_arm_disassembler_option, get_arm_regnames and
set_arm_regname_option.
Pass show_disassembly_style_sfunc to the "disassembler" setshow command.
* rs6000-tdep.c (powerpc_disassembler_options): New static variable.
(rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
* s390-tdep.c (s390_disassembler_options): New static variable.
(s390_gdbarch_init):all set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
gdb/testsuite/
* gdb.arch/powerpc-power.exp: Delete test.
* gdb.arch/powerpc-power.s: Likewise.
* gdb.disasm/disassembler-options.exp: New test.
* gdb.arch/powerpc-altivec.exp: Likewise.
* gdb.arch/powerpc-altivec.s: Likewise.
* gdb.arch/powerpc-altivec2.exp: Likewise.
* gdb.arch/powerpc-altivec2.s: Likewise.
* gdb.arch/powerpc-altivec3.exp: Likewise.
* gdb.arch/powerpc-altivec3.s: Likewise.
* gdb.arch/powerpc-power7.exp: Likewise.
* gdb.arch/powerpc-power7.s: Likewise.
* gdb.arch/powerpc-power8.exp: Likewise.
* gdb.arch/powerpc-power8.s: Likewise.
* gdb.arch/powerpc-power9.exp: Likewise.
* gdb.arch/powerpc-power9.s: Likewise.
* gdb.arch/powerpc-vsx.exp: Likewise.
* gdb.arch/powerpc-vsx.s: Likewise.
* gdb.arch/powerpc-vsx2.exp: Likewise.
* gdb.arch/powerpc-vsx2.s: Likewise.
* gdb.arch/powerpc-vsx3.exp: Likewise.
* gdb.arch/powerpc-vsx3.s: Likewise.
* gdb.arch/arm-disassembler-options.exp: Likewise.
* gdb.arch/powerpc-disassembler-options.exp: Likewise.
* gdb.arch/s390-disassembler-options.exp: Likewise.
gdb_pretty_print_insn allocates and destroys a couple local buffers
each time it is called, which can be many times when disassembling a
region of memory. Avoid that overhead by adding a new class that
holds the buffers and making gdb_pretty_print_insn a method of that
class, so that the buffers can be reused across calls.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm.c (gdb_pretty_print_insn): Rename to ...
(gdb_pretty_print_disassembler::pretty_print_insn): ... this.
Remove gdbarch parameter. Adapt to clear the object's buffers
instead of allocating new buffers, and to print using the object's
gdb_disassembler instead of calling gdb_print_insn.
(dump_insns): Use gdb_pretty_print_disassembler.
* disasm.h (gdb_pretty_print_insn): Delete declaration.
(gdb_pretty_print_disassembler): New class.
* record-btrace.c (btrace_insn_history): Use
gdb_pretty_print_disassembler.
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
ui_file_rewind is a ui_file method that only really works with mem
buffer files, and is a nop on other ui_file types. It'd be desirable
to eliminate it from the base ui_file interface, and move it to the
"mem_fileopen" subclass of ui_file instead. A following patch does
just that.
Unfortunately, there are a couple references to ui_file_rewind inside
gdb_disassembler::pretty_print_insn that were made harder to eliminate
with the recent addition of the gdb_disassembler wrapper.
Before the gdb_disassembler wrapper was added, in commit
e47ad6c0bd ("Refactor disassembly code"), gdb_pretty_print_insn
used to be passed a ui_file pointer as argument, and it was simple to
adjust that pointer be a "mem_fileopen" ui_file pointer instead, since
there's only one gdb_pretty_print_insn caller.
That commit made gdb_pretty_print_insn be a method of
gdb_disassembler, and removed the method's ui_file parameter at the
same time, replaced by referencing the gdb_disassembler's stream
instead. The trouble is that a gdb_disassembler can be instantiated
with a pointer any kind of ui_file. Casting the gdb_disassembler's
stream to a mem_fileopen ui_file inside
gdb_disassembler::pretty_print_insn in order to call the reset method
would be gross hack.
The fix here is to:
- make gdb_disassembler::pretty_print_insn a be free function again
instead of a method of gdb_disassembler. I.e., bring back
gdb_pretty_print_insn.
- but, don't add back the ui_file * parameter. Instead, move the
mem_fileopen allocation inside. That is a better interface, given
that the ui_file is only ever used as temporary scratch buffer as
an implementation detail of gdb_pretty_print_insn. The function's
real "where to send output" parameter is the ui_out pointer. (A
following patch will add back buffer reuse across invocations
differently).
- don't add back a disassemble_info pointer either. That used to be
necessary for this bit:
err = m_di.read_memory_func (pc, &data, 1, &m_di);
if (err != 0)
m_di.memory_error_func (err, pc, &m_di);
... but AFAIK, it's not really necessary. We can replace those
three lines with a call to read_code. This seems to fix a
regression even, because before commit d8b49cf0c8 ("Don't throw
exception in dis_asm_memory_error"), that memory_error_func call
would throw an error/exception, but now it only records the error
in the gdb_disassembler's m_err_memaddr field. (read_code throws
on error.)
With all these, gdb_pretty_print_insn is completely layered on top of
gdb_disassembler only using the latter's public API.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* disasm.c (gdb_disassembler::pretty_print_insn): Rename to...
(gdb_pretty_print_insn): ... this. Now a free function. Add back
a 'gdbarch' parameter. Allocate a mem_fileopen stream here.
Adjust to call gdb_print_insn instead of
gdb_disassembler::print_insn.
(dump_insns, do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly, do_assembly_only): Add back a
'gdbarch' parameter. Remove gdb_disassembler parameter.
(gdb_disassembly): Don't allocate a gdb_disassembler here.
* disasm.h (gdb_disassembler::pretty_print_insn): Delete
declaration.
(gdb_pretty_print_insn): Re-add declaration.
* record-btrace.c (btrace_insn_history): Don't allocate a
gdb_disassembler here. Adjust to call gdb_pretty_print_insn.
The file_string parameter was added in 8f0eea0 (sorry, no title back
then) and has never actually been used.
gdb/ChangeLog:
* disasm.h (gdb_disassembly): Remove file_string parameter.
* disasm.c (gdb_disassembly): Likewise.
* cli/cli-cmds.c (print_disassembly): Adapt.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Likewise.
* stack.c (do_gdb_disassembly): Likewise.
Hi,
GDB calls some APIs from opcodes to do disassembly and provide some
call backs. This model makes troubles on C++ exception unwinding,
because GDB is a C++ program, and opcodes is still compiled as C.
As we can see, frame #10 and #12 are C++, while #frame 11 is C,
#10 0x0000000000544228 in memory_error (err=TARGET_XFER_E_IO, memaddr=<optimized out>) at ../../binutils-gdb/gdb/corefile.c:237
#11 0x00000000006b0a54 in print_insn_aarch64 (pc=0, info=0xffffffffeeb0) at ../../binutils-gdb/opcodes/aarch64-dis.c:3185
#12 0x0000000000553590 in gdb_pretty_print_insn (gdbarch=gdbarch@entry=0xbbceb0, uiout=uiout@entry=0xbc73d0, di=di@entry=0xffffffffeeb0,
insn=0xffffffffed40, insn@entry=0xffffffffed90, flags=flags@entry=0,
C++ exception unwinder can't go across frame #11 unless it has
unwind table. However, C program on many architectures doesn't
have it in default. As a result, GDB aborts, which is described
in PR 20939.
This is not the first time we see this kind of problem. We've
had a commit 89525768cd
"Propagate GDB/C++ exceptions across readline using sj/lj-based TRY/CATCH".
We can fix the disassembly bug in a similar way, this is the option one.
Since opcodes is built with gdb, we fix this problem in a different
way as we did for the same issue with readline. Instead of throwing
exception in dis_asm_memory_error, we record the failed memory
address, and throw exception when GDB returns from opcodes disassemblers.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
PR gdb/20939
* disasm.c (gdb_disassembler::dis_asm_memory_error): Don't
call memory_error, save memaddr instead.
(gdb_disassembler::print_insn): If gdbarch_print_insn returns
negative, cal memory_error.
* disasm.h (gdb_disassembler) <m_err_memaddr>: New field.
gdb/testsuite:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* gdb.base/all-architectures.exp.in (do_arch_tests): Test
disassemble on address 0.
This patch addes class gdb_disassembler, and refactor
code to use it. The gdb_disassembler object is saved
in disassember_info.application_data. However,
disassember_info.application_data is already used by
gdb for arm, mips spu, and scm-disasm. In arm and mips,
.application_data is gdbarch, but we can still get gdbarch
from gdb_disassember.
The use of application_data in spu is a little bit
complicated. It creates its own disassemble_info, and
save spu_dis_asm_data in .application_data. This will
overwrite the pointer to gdb_disassembler, so we need
to find another place to save spu_dis_asm_data. I
extend disassemble_info, and put "id" there.
gdb:
2017-01-26 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Include "disasm.h".
(gdb_print_insn_arm): Update code to get gdbarch.
* disasm.c (dis_asm_read_memory): Change it to
gdb_disassembler::dis_asm_read_memory.
(dis_asm_memory_error): Likewise.
(dis_asm_print_address): Likewise.
(gdb_pretty_print_insn): Change it to
gdb_disassembler::pretty_print_insn.
(dump_insns): Add one argument gdb_disassemlber. All
callers updated.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
(do_assembly_only): Likewise.
(gdb_disassembler::gdb_disassembler): New.
(gdb_disassembler::print_insn): New.
* disasm.h (class gdb_disassembler): New.
(gdb_pretty_print_insn): Remove declaration.
(gdb_disassemble_info): Likewise.
* guile/scm-disasm.c (class gdbscm_disassembler): New.
(gdbscm_disasm_read_memory_worker): Update.
(gdbscm_disasm_read_memory): Update.
(gdbscm_disasm_memory_error): Remove.
(gdbscm_disasm_print_address): Remove.
(gdbscm_disassembler::gdbscm_disassembler): New.
(gdbscm_print_insn_from_port): Update.
* mips-tdep.c: Include disasm.h.
(gdb_print_insn_mips): Update code to get gdbarch.
* record-btrace.c (btrace_insn_history): Update.
* spu-tdep.c: Include disasm.h.
(struct spu_dis_asm_data): Remove.
(struct spu_dis_asm_info): New.
(spu_dis_asm_print_address): Use spu_dis_asm_info to get
SPU id.
(gdb_print_insn_spu): Cast disassemble_info to
spu_dis_asm_info.
This patch adds a new function null_stream, which returns a null
stream. The null stream can be used in multiple places. It is
used in gdb_insn_length, and the following patches will use it too.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* disasm.c (do_ui_file_delete): Delete.
(gdb_insn_length): Move code creating stream to ...
* utils.c (null_stream): ... here. New function.
* utils.h (null_stream): Declare.
This removes make_cleanup_htab_delete in favor of destructors,
building on an earlier patch that added the htab_up typedef.
Testing revealed that more cleanup-removal work was needed in
dwarf2loc.c, so this version of the patch changes code there to use
unordered_set and vector, removing some more cleanups.
2017-01-10 Tom Tromey <tom@tromey.com>
* utils.h (make_cleanup_htab_delete): Don't declare.
* utils.c (do_htab_delete_cleanup, make_cleanup_htab_delete):
Remove.
* linespec.c (decode_compound_collector): Add constructor,
destructor.
(lookup_prefix_sym): Remove cleanup.
(symtab_collector): Add constructor, destructor.
(collect_symtabs_from_filename): Remove cleanup.
* disasm.c (do_mixed_source_and_assembly): Use htab_up.
* compile/compile-c-symbols.c (generate_c_for_variable_locations):
Use htab_up.
* gnu-v3-abi.c (gnuv3_print_vtable): Use htab_up.
* dwarf2read.c (dw2_expand_symtabs_matching)
(dw2_map_symbol_filenames, dwarf_decode_macros)
(write_psymtabs_to_index): Use htab_up.
* dwarf2loc.c (func_verify_no_selftailcall)
(call_site_find_chain_1, func_verify_no_selftailcall)
(chain_candidate, call_site_find_chain_1): Use std::unordered_set,
std::vector, gdb::unique_xmalloc_ptr.
(call_sitep): Remove typedef.
(dwarf2_locexpr_baton_eval): Remove unused variable.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This patch consolidates the (possibly-questionable) spots where we
remove a declaration but continue to call some function for side
effects. In a couple of cases it wasn't entirely clear to me that
this mattered; and in some other cases it might be more aesthetically
pleasing to use ATTRIBUTE_UNUSED. So, I broke this out into a
separate patch for simpler review.
2016-07-14 Tom Tromey <tom@tromey.com>
* arch-utils.c (default_skip_permanent_breakpoint): Remove
"bp_insn".
* disasm.c (do_assembly_only): Remove "num_displayed".
* dwarf2read.c (read_abbrev_offset): Remove "length".
(dwarf_decode_macro_bytes) <DW_MACINFO_vendor_ext>: Remove
"constant".
* m32c-tdep.c (make_regs): Remove "r2hl", "r3hl", and "intbhl".
* microblaze-tdep.c (microblaze_frame_cache): Remove "func".
* tracefile.c (trace_save): Remove "status".
Give the function a better name (drop "maybe_") and update the header
comment.
gdb/ChangeLog:
* disasm.c (maybe_add_dis_line_entry): Rename to...
(add_dis_line_entry): ...this, and update header comment.
(do_mixed_source_and_assembly): Now use add_dis_line_entry.
This patch fixes C++ build errors like this:
/home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive]
| COREFILTER_HUGETLB_PRIVATE);
^
This is a case of enums used as bit flags. Unlike "regular" enums,
these values are supposed to be or'ed together. However, in C++, the
type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to
an enum variable without a cast. That means that this:
enum foo_flags flags = 0;
if (...)
flags |= FOO_FLAG1;
if (...)
flags |= FOO_FLAG2;
... would have to be written as:
enum foo_flags flags = (enum foo_flags) 0;
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG1);
if (...)
flags = (enum foo_flags) (flags | FOO_FLAG2);
which is ... ugly. Alternatively, we'd have to use an int for the
variable's type, which isn't ideal either.
This patch instead adds an "enum flags" class. "enum flags" are
exactly the enums where the values are bits that are meant to be ORed
together.
This allows writing code like the below, while with raw enums this
would fail to compile without casts to enum type at the assignments to
'f':
enum some_flag
{
flag_val1 = 1 << 1,
flag_val2 = 1 << 2,
flag_val3 = 1 << 3,
flag_val4 = 1 << 4,
};
DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags)
some_flags f = flag_val1 | flag_val2;
f |= flag_val3;
It's also possible to assign literal zero to an enum flags variable
(meaning, no flags), dispensing either adding an awkward explicit "no
value" value to the enumeration or the cast to assignments from 0.
For example:
some_flags f = 0;
f |= flag_val3 | flag_val4;
Note that literal integers other than zero do fail to compile:
some_flags f = 1; // error
C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that
case.
gdb/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* btrace.h: Include common/enum-flags.h.
(btrace_insn_flags): Define.
(struct btrace_insn) <flags>: Change type.
(btrace_function_flags): Define.
(struct btrace_function) <flags>: Change type.
(btrace_thread_flags): Define.
(struct btrace_thread_info) <flags>: Change type.
* c-exp.y (token_flags): Rename to ...
(token_flag): ... this.
(token_flags): Define.
(struct token) <flags>: Change type.
* common/enum-flags.h: New file.
* compile/compile-c-types.c (convert_qualified): Change type of
'quals' local.
* compile/compile-internal.h: Include "common/enum-flags.h".
(gcc_qualifiers_flags): Define.
* completer.c (enum reg_completer_targets): Rename to ...
(enum reg_completer_target): ... this.
(reg_completer_targets): Define.
(reg_or_group_completer_1): Change type of 'targets' parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Change type
of 'psl_flags' local.
(do_mixed_source_and_assembly): Change type of 'psl_flags' local.
* infrun.c: Include "common/enum-flags.h".
(enum step_over_what): Rename to ...
(enum step_over_what_flag): ... this.
(step_over_what): Change type.
(start_step_over): Change type of 'step_what' local.
(thread_still_needs_step_over): Now returns a step_over_what.
Adjust.
(keep_going_pass_signal): Change type of 'step_what' local.
* linux-tdep.c: Include "common/enum-flags.h".
(enum filterflags): Rename to ...
(enum filter_flag): ... this.
(filter_flags): Define.
(dump_mapping_p): Change type of 'filterflags' parameter.
(linux_find_memory_regions_full): Change type of 'filterflags'
local.
(linux_find_memory_regions_full): Pass the address of an unsigned
int to sscanf instead of the address of an enum.
* record-btrace.c (btrace_print_lines): Change type of local
'psl_flags'.
(btrace_call_history): Replace 'flags' parameter
with 'int_flags' parameter. Adjust.
(record_btrace_call_history, record_btrace_call_history_range)
(record_btrace_call_history_from): Rename 'flags' parameter to
'int_flags'. Use record_print_flags.
* record.h: Include "common/enum-flags.h".
(record_print_flags): Define.
* source.c: Include "common/enum-flags.h".
(print_source_lines_base, print_source_lines): Change type of
flags parameter.
* symtab.h: Include "common/enum-flags.h".
(enum print_source_lines_flags): Rename to ...
(enum print_source_lines_flag): ... this.
(print_source_lines_flags): Define.
(print_source_lines): Change prototype.
The "record instruction-history" command prints for each instruction in
addition to the instruction's disassembly:
- the instruction number in the recorded execution trace
- a '?' before the instruction if it was executed speculatively
To allow the "record instruction-history" command to use GDB's disassembly
infrastructure, we extend gdb_pretty_print_insn to optionally print those
additional fields and export the function.
Add a new struct disasm_insn to add additional fields describing the
to-be-disassembled instruction. The additional fields are:
number an optional instruction number, zero if omitted.
is_speculative a predicate saying whether the instruction was
executed speculatively.
If non-zero, the instruction number is printed first. It will also appear
as a new optional field "insn-number" in MI. The field will be present if
insn_num is non-zero.
If is_speculative is set, speculative execution will be indicated by a "?"
following the new instruction number field. Unless the PC is omitted, it
will overwrite the first byte of the PC prefix. It will appear as a new
optional field "is-speculative" in MI. The field will contain "?" and will
be present if is_speculative is set.
The speculative execution indication is guarded by a new flag
DISASSEMBLY_SPECULATION.
Replace the PC parameter of gdb_pretty_print_insn with a pointer to the above
struct. GDB's "disassemble" command does not use the new fields.
gdb/
* disasm.h (DISASSEMBLY_SPECULATION): New.
(struct disasm_insn): New.
(gdb_pretty_print_insn): New.
* disasm.c (gdb_pretty_print_insn): Replace parameter PC with INSN.
Update users. Print instruction number and indicate speculative
execution, if requested.
Split disasm.c's dump_insn into two parts:
- print a single instruction
- loop over the specified address range
The first part will be refined in subsequent patches so it can be reused.
gdb/
* disasm.c (dump_insns): Split into this and ...
(gdb_pretty_print_insn): ... this.