This patch allows examination of the registers FS_BASE and GS_BASE
for Linux Systems running on 64bit. Tests for simple read and write
of the new registers is also added with this patch.
2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
Richard Henderson <rth@redhat.com>
gdb/ChangeLog:
* amd64-linux-nat.c (PTRACE_ARCH_PRCTL): New define.
(amd64_linux_fetch_inferior_registers): Add case to fetch FS_BASE
GS_BASE for older kernels.
(amd64_linux_store_inferior_registers): Add case to store FS_BASE
GS_BASE for older kernels.
* amd64-linux-tdep.c (amd64_linux_gregset_reg_offset): Add FS_BASE
and GS_BASE to the offset table.
(amd64_linux_register_reggroup_p): Add FS_BASE and GS_BASE to the
system register group.
* amd64-nat.c (amd64_native_gregset_reg_offset): Implements case
for older kernels.
* amd64-tdep.c (amd64_init_abi): Add segment registers for the
amd64 ABI.
* amd64-tdep.h (amd64_regnum): Add AMD64_FSBASE_REGNUM and
AMD64_GSBASE_REGNUM.
(AMD64_NUM_REGS): Set to AMD64_GSBASE_REGNUM + 1.
* features/Makefile (amd64-linux.dat, amd64-avx-linux.dat)
(amd64-mpx-linux.dat, amd64-avx512-linux.dat, x32-linux.dat)
(x32-avx-linux.dat, x32-avx512-linux.dat): Add
i386/64bit-segments.xml in those rules.
* features/i386/64bit-segments.xml: New file.
* features/i386/amd64-avx-mpx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx512-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-mpx-linux.xml: Add 64bit-segments.xml.
* features/i386/x32-avx512-linux.xml: Add 64bit-segments.xml.
* features/i386/x32-avx-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-linux.xml: Add 64bit-segments.xml.
* features/i386/amd64-avx-linux.c: Regenerated.
* features/i386/amd64-avx-mpx-linux.c: Regenerated.
* features/i386/amd64-avx-mpx.c: Regenerated.
* features/i386/amd64-avx512-linux.c: Regenerated.
* features/i386/amd64-linux.c: Regenerated.
* features/i386/amd64-mpx-linux.c: Regenerated.
* features/i386/i386-avx-mpx-linux.c: Regenerated.
* features/i386/i386-avx-mpx.c: Regenerated.
* features/i386/x32-avx-linux.c: Regenerated.
* features/i386/x32-avx512-linux.c: Regenerated.
* regformats/i386/amd64-avx-linux.dat: Regenerated.
* regformats/i386/amd64-avx-mpx-linux.dat: Regenerated.
* regformats/i386/amd64-avx512-linux.dat: Regenerated.
* regformats/i386/amd64-linux.dat: Regenerated.
* regformats/i386/amd64-mpx-linux.dat: Regenerated.
* regformats/i386/x32-avx-linux.dat: Regenerated.
* regformats/i386/x32-avx512-linux.dat: Regenerated.
* regformats/i386/x32-linux.dat: Regenerated.
gdb/doc/ChangeLog:
* gdb.texinfo (i386 Features): Add system segment registers
as feature.
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_64_regmap): Add fs_base and gs_base
to the register table.
(x86_fill_gregset): Add support for old kernels for the
fs_base and gs_base system registers.
(x86_store_gregset): Likewise.
* configure.srv (srv_i386_64bit_xmlfiles): Add 64bit-segments.xml.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-gs_base.c: New file.
* gdb.arch/amd64-gs_base.exp: New file.
Change-Id: I2e0eeb93058a2320d4d3b045082643cfe4aff963
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
The macros mentioned in the title were set only for GDB. In gdbserver they
were not set until now. To align the code in GDB and gdbserver these macros
are also added into gdbserver, enabling read and write of gs_base and fs_base
registers from the system in new and old kernels.
2017-01-27 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/gdbserver/ChangeLog:
* configure.ac: Check if the fs_base and gs_base members of
`struct user_regs_struct' exist.
* config.in: Regenerated.
* configure: Likewise.
Before this patch, some functions would read the inferior memory with
(*the_target)->read_memory, which returns the raw memory, rather than the
shadowed memory.
This is wrong since these functions do not expect to read a breakpoint
instruction and can lead to invalid behavior.
Use of raw memory in get_next_pcs_read_memory_unsigned_integer for example
could lead to get_next_pc returning an invalid pc.
Here's how this would happen:
In non-stop:
the user issues:
thread 1
step&
thread 2
step&
thread 3
step&
In a similar way as non-stop-fair-events.exp (threads are looping).
GDBServer:
linux_resume is called
GDBServer has pending events,
threads are not resumed and single-step breakpoint for thread 1 not installed.
linux_wait_1 is called with a pending event on thread 2 at pc A
GDBServer handles the event and calls proceed_all_lwps
This calls proceed_one_lwp and installs single-step breakpoints on all
the threads that need one.
Now since thread 1 needs to install a single-step breakpoint and is at pc B
(different than thread 2), a step-over is not initiated and get_next_pc
is called to figure out the next instruction from pc B.
However it may just be that thread 3 as a single step breakpoint at pc
B. And thus get_next_pc fails.
This situation is tested with non-stop-fair-events.exp.
In other words, single-step breakpoints are installed in proceed_one_lwp
for each thread. GDBserver proceeds two threads for resume_step, as
requested by GDB, and the thread proceeded later may see the single-step
breakpoints installed for the thread proceeded just now.
Tested on gdbserver-native/-m{thumb,arm} no regressions.
gdb/gdbserver/ChangeLog:
* linux-aarch32-low.c (arm_breakpoint_kind_from_pc): Use
target_read_memory.
* linux-arm-low.c (get_next_pcs_read_memory_unsigned_integer): Likewise.
(get_next_pcs_syscall_next_pc): Likewise.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Since we don't use suffix rules nor implicit rules in gdb, we can
disable them. The advantage is a slightly faster make [1].
Here are some numbers about the speedup. I ran this on my trusty old
Intel Q6600, so the time numbers are probably higher than what you'd get
on any recent hardware. I ran "make" in the gdb/ directory of an
already built repository (configured with --enable-targets=all). I
recorded the time of execution (average of 5). I then ran "make -d" and
recorded the number of printed lines, which gives a rough idea of the
number of operations done.
I compared the following configurations, to see the impact of both the
empty .SUFFIXES target and the empty pattern rules, as well as running
"make -r", which can be considered the "ideal" case.
A - baseline
B - baseline + .SUFFIXES
C - baseline + pattern rules
D - baseline + .SUFFIXES + pattern rules
E - baseline + make -r
config | time (s) | "make -d"
-----------------------------
A | 5.74 | 2396643
B | 1.19 | 298469
C | 2.81 | 1266573
D | 1.13 | 245489
E | 1.01 | 163914
We can see that the empty .SUFFIXES target has a bigger impact than the
empty pattern rules, but still it doesn't hurt to disable the implicit
pattern rules as well.
There are still some mentions of implicit rules I can't get rid of in
the "make -d" output. For example, it's trying to build .c files from
.w files:
Looking for an implicit rule for '/home/simark/src/binutils-gdb/gdb/infrun.c'.
Trying pattern rule with stem 'infrun'.
Trying implicit prerequisite '/home/simark/src/binutils-gdb/gdb/infrun.w'.
and trying to build Makefile.in from a bunch of extensions:
Looking for an implicit rule for 'Makefile.in'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.o'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.c'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.cc'.
... many more ...
If somebody knows how to disable them, we can do it, but at this point
the returns are minimal, so it is not that important.
I verified that both in-tree and out-of-tree builds work.
[1] Switching from explicit rules to pattern rules for files in
subdirectories actually made it slower, so this is kind of a way to
redeem myself. But it the end it's faster than it was previously,
so it was all worth it. :)
gdb/ChangeLog:
* disable-implicit-rules.mk: New file.
* Makefile.in: Include disable-implicit-rules.mk.
* data-directory/Makefile.in: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/ChangeLog:
* Makefile.in: Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
gdb/testsuite/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
This patch fixes a few problems with GDB's time handling.
#1 - It avoids problems with gnulib's C++ namespace support
On MinGW, the struct timeval that should be passed to gnulib's
gettimeofday replacement is incompatible with libiberty's
timeval_sub/timeval_add. That's because gnulib also replaces "struct
timeval" with its own definition, while libiberty expects the
system's.
E.g., in code like this:
gettimeofday (&prompt_ended, NULL);
timeval_sub (&prompt_delta, &prompt_ended, &prompt_started);
timeval_add (&prompt_for_continue_wait_time,
&prompt_for_continue_wait_time, &prompt_delta);
That's currently handled in gdb by not using gnulib's gettimeofday at
all (see common/gdb_sys_time.h), but that #undef hack won't work with
if/when we enable gnulib's C++ namespace support, because that mode
adds compile time warnings for uses of ::gettimeofday, which are hard
errors with -Werror.
#2 - But there's an elephant in the room: gettimeofday is not monotonic...
We're using it to:
a) check how long functions take, for performance analysis
b) compute when in the future to fire events in the event-loop
c) print debug timestamps
But that's exactly what gettimeofday is NOT meant for. Straight from
the man page:
~~~
The time returned by gettimeofday() is affected by
discontinuous jumps in the system time (e.g., if the system
administrator manually changes the system time). If you need a
monotonically increasing clock, see clock_gettime(2).
~~~
std::chrono (part of the C++11 standard library) has a monotonic clock
exactly for such purposes (std::chrono::steady_clock). This commit
switches to use that instead of gettimeofday, fixing all the issues
mentioned above.
gdb/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/run-time-clock.c.
(HFILES_NO_SRCDIR): Add common/run-time-clock.h.
(COMMON_OBS): Add run-time-clock.o.
* common/run-time-clock.c, common/run-time-clock.h: New files.
* defs.h (struct timeval, print_transfer_performance): Delete
declarations.
* event-loop.c (struct gdb_timer) <when>: Now a
std::chrono::steady_clock::time_point.
(create_timer): use std::chrono::steady_clock instead of
gettimeofday. Use new instead of malloc.
(delete_timer): Use delete instead of xfree.
(duration_cast_timeval): New.
(update_wait_timeout): Use std::chrono::steady_clock instead of
gettimeofday.
* maint.c: Include <chrono> instead of "gdb_sys_time.h", <time.h>
and "timeval-utils.h".
(scoped_command_stats::~scoped_command_stats)
(scoped_command_stats::scoped_command_stats): Use
std::chrono::steady_clock instead of gettimeofday. Use
user_cpu_time_clock instead of get_run_time.
* maint.h: Include "run-time-clock.h" and <chrono>.
(scoped_command_stats): <m_start_cpu_time>: Now a
user_cpu_time_clock::time_point.
<m_start_wall_time>: Now a std::chrono::steady_clock::time_point.
* mi/mi-main.c: Include "run-time-clock.h" and <chrono> instead of
"gdb_sys_time.h" and <sys/resource.h>.
(rusage): Delete.
(mi_execute_command): Use new instead of XNEW.
(mi_load_progress): Use std::chrono::steady_clock instead of
gettimeofday.
(timestamp): Rewrite in terms of std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
(timeval_diff): Delete.
(print_diff): Adjust to use std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
* mi/mi-parse.h: Include "run-time-clock.h" and <chrono> instead
of "gdb_sys_time.h".
(struct mi_timestamp): Change fields types to
std::chrono::steady_clock::time_point, user_cpu_time_clock::time
and system_cpu_time_clock::time_point, instead of struct timeval.
* symfile.c: Include <chrono> instead of <time.h> and
"gdb_sys_time.h".
(struct time_range): New.
(generic_load): Use std::chrono::steady_clock instead of
gettimeofday.
(print_transfer_performance): Replace timeval parameters with a
std::chrono::steady_clock::duration parameter. Adjust.
* utils.c: Include <chrono> instead of "timeval-utils.h",
"gdb_sys_time.h", and <time.h>.
(prompt_for_continue_wait_time): Now a
std::chrono::steady_clock::duration.
(defaulted_query, prompt_for_continue): Use
std::chrono::steady_clock instead of
gettimeofday/timeval_sub/timeval_add.
(reset_prompt_for_continue_wait_time): Use
std::chrono::steady_clock::duration instead of struct timeval.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
(vfprintf_unfiltered): Use std::chrono::steady_clock instead of
gettimeofday. Use std::string. Use '.' instead of ':'.
* utils.h: Include <chrono>.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
gdb/gdbserver/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* debug.c: Include <chrono> instead of "gdb_sys_time.h".
(debug_vprintf): Use std::chrono::steady_clock instead of
gettimeofday. Use '.' instead of ':'.
* tracepoint.c: Include <chrono> instead of "gdb_sys_time.h".
(get_timestamp): Use std::chrono::steady_clock instead of
gettimeofday.
Mostly some whitespace changes to make things a bit more consistent.
gdb/ChangeLog:
* Makefile.in: Fix whitespace formatting.
gdb/gdbserver/ChangeLog:
* Makefile.in: Fix whitespace formatting.
I find the big file lists in the Makefiles a bit ugly and not very
practical. Since there are multiple filenames on each line (as much as
fits in 80 columns), it's not easy to add, remove or change a name in
the middle. As a result, we have a mix of long and short lines in no
particular order (ALL_TARGET_OBS is a good example).
I therefore suggest flattening the lists (one name per line) and keeping
them in alphabetical order. The diffs will be much clearer and merge
conflicts will be easier to resolve.
A nice (IMO) side-effect I observed is that the files are compiled
alphabetically by make, so it gives a rough idea of the progress of the
build.
I added a comment in gdb/Makefile.in to mention to keep the file lists
ordered, and gave the general guidelines on what order to respect. I
added a comment in other Makefiles which refers to gdb/Makefile.in, to
avoid duplication.
Running the patch through the buildbot found that gdb.base/default.exp
started to fail. The languages in the error message shown when typing
"set language" have changed order. We could probably improve gdb so
that it prints them in a stable order, regardless of the order of the
object list passed to the linked, but just fixing the test is easier for
now.
New in v2:
- Change ordering style, directories go at the end.
- Cleanup gdbserver's and data-directory's Makefile as well.
- Add comments at top of Makefiles about the ordering.
- Remove wrong trailing backslahes.
- Fix test gdb.base/default.exp.
gdb/ChangeLog:
* Makefile.in: Add comment about file lists ordering.
(SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_MI_OBS, SUBDIR_MI_SRCS,
SUBDIR_TUI_OBS, SUBDIR_TUI_SRCS, SUBDIR_GCC_COMPILE_OBS,
SUBDIR_GCC_COMPILE_SRCS, SUBDIR_GUILE_OBS, SUBDIR_GUILE_SRCS,
SUBDIR_PYTHON_OBS, SUBDIR_PYTHON_SRCS, SUBDIR_GDBTK_OBS,
SUBDIR_GDBTK_SRCS, XMLFILES, REMOTE_OBS, ALL_64_TARGET_OBS,
ALL_TARGET_OBS, SFILES, HFILES_NO_SRCDIR, HFILES_WITH_SRCDIR,
COMMON_OBS, YYFILES, YYOBJ, generated_files, ALLDEPFILES):
Flatten list and order alphabetically.
* data-directory/Makefile.in: Add comment about file lists
ordering.
(GEN_SYSCALLS_FILES, PYTHON_FILE_LIST): Flatten list and order
alphabetically.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES, OBS): Flatten list and order
alphabetically.
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Fix output of "set language".
As mentioned here [1], suffix rules are obsolete and have been
superseeded with pattern rules. People (myself included, before writing
this patch) are more likely to know what pattern rules are than suffix
rules.
AFAIK, .SUFFIXES targets are only used for those rules, and can be
removed as well.
New in v2:
- Replace rule in gdbserver/Makefile.in as well.
[1] https://www.gnu.org/software/make/manual/html_node/Suffix-Rules.html
gdb/ChangeLog:
* Makefile.in (.c.o): Replace rule with ...
(%.o: %.c): ... this one.
(.po.gmo): Replace rule with ...
(%.gmo: %.po): ... this one.
(.po.pox): Replace rule with ...
(%.pox: %.po): ... this one.
(.y.c): Replace rule with ...
(%.c: %.y): ... this one.
(.l.c): Replace rule with ...
(%.c: %.l): ... this one.
(.SUFFIXES): Remove all instances.
gdb/gdbserver/ChangeLog:
* Makefile.in (.c.o): Replace rule with ...
(%.o: %.c): ... this one.
Since GNU make is now required to build GDB, we can remove everything
that checks whether the current make implemention is the GNU one or
not. I simply removed the @GMAKE_TRUE@ prefixes and removed the whole
lines that were prefixed with @GMAKE_FALSE@.
I removed the code in the configure scripts that set those variables.
I also removed the following bits from the configure scripts:
AC_CHECK_PROGS(MAKE, make): GNU make already defines a MAKE variable
internally to be used when invoking Makefiles recursively. I don't see
this variable being used anywhere else (in scripts for example), so I
think it's safe for removal.
AC_PROG_MAKE_SET: This macro defines a SET_MAKE output variable, which
is meant to be used in Makefiles to define the MAKE variable when
using an implementation of make that doesn't already define it.
Since we are now requiring GNU make, we don't need it anymore.
Plus, I don't see SET_MAKE being used anywhere, so I don't think it
was actually doing anything...
gdb/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
gdb/gdbserver/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
gdb/testsuite/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
Use AX_CXX_COMPILE_STDCXX to detect if the compiler supports C++11,
and if -std=xxx switches are necessary to enable C++11.
We need to tweak AX_CXX_COMPILE_STDCXX a bit though. Pristine
upstream AX_CXX_COMPILE_STDCXX appends -std=gnu++11 to CXX directly.
That doesn't work for us, because the top level Makefile passes CXX
down to subdirs, and that overrides whatever gdb/Makefile may set CXX
to. The result would be that a make invocation from the build/gdb/
directory would use "g++ -std=gnu++11" as expected, while a make
invocation at the top level would not.
So instead of having AX_CXX_COMPILE_STDCXX set CXX directly, tweak it
to AC_SUBST a separate variable -- CXX_DIALECT -- and use '$(CXX)
(CXX_DIALECT)' to compile/link.
Confirmed that this enables C++11 starting with gcc 4.8, the first gcc
release with full C++11 support.
Also confirmed that configure errors out gracefully with older GCC
releases:
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features by default... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++0x... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++0x... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with +std=c++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -h std=c++11... no
configure: error: *** A compiler with support for C++11 language features is required.
Makefile:9451: recipe for target 'configure-gdb' failed
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory '/home/pedro/brno/pedro/gdb/mygit/cxx-convertion/build-gcc-4.7'
If we need to revert back to making C++11 optional, all that's
necessary is to change the "mandatory" to "optional" in configure.ac
and regenerate configure (both gdb and gdbserver).
gdb/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
(COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
(FLAGS_TO_PASS): Pass CXX_DIALECT.
* acinclude.m4: Include ax_cxx_compile_stdcxx.m4.
* ax_cxx_compile_stdcxx.m4: Add FSF copyright header. Set and
AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP.
* configure.ac: Call AX_CXX_COMPILE_STDCXX.
* config.in: Regenerate.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
(COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
* acinclude.m4: Include ../ax_cxx_compile_stdcxx.m4.
* configure.ac: Call AX_CXX_COMPILE_STDCXX.
* config.in: Regenerate.
* configure: Regenerate.
If the target can do software single step, it can do range
stepping.
gdb/gdbserver:
2016-10-27 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_supports_agent): Return true if
can_software_single_step return true.
Nowadays, we select events to be reported to GDB in random, however
that is not enough when many GDBserver internal events (not reported
to GDB) are generated.
GDBserver pulls all events out of kernel via waitpid, and leave them
pending. When goes through threads which have pending events,
GDBserver uses find_inferior to find the first thread which has
pending event, and consumes it. Note that find_inferior always
iterate threads in a fixed order. If multiple threads keep hitting
GDBserver breakpoints, range stepping with single-step breakpoint for
example, threads in the head of the thread list are more likely to be
processed and threads in the tail are starved. This causes some timeout
fails in gdb.threads/non-stop-fair-events.exp when range stepping is
enabled on arm-linux.
This patch fixes this issue by randomly selecting pending events. It
adds a new function find_inferior_in_random, which iterates threads
which have pending events randomly.
gdb/gdbserver:
2016-10-27 Yao Qi <yao.qi@linaro.org>
* inferiors.c (find_inferior_in_random): New function.
* inferiors.h (find_inferior_in_random): Declare.
* linux-low.c (linux_wait_for_event_filtered): Call
find_inferior_in_random instead of find_inferior.
This patch removes single-step breakpoints if the event is only
GDBserver internal, IOW, isn't reported back to GDB.
gdb/gdbserver:
2016-10-27 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_wait_1): If single-step breakpoints are
inserted, remove them.
Currently GDB never sends more than one action per vCont packet, when
connected in non-stop mode. A follow up patch will change that, and
it exposed a gdbserver problem with the vCont handling.
For example, this in non-stop mode:
=> vCont;s:p1.1;c
<= OK
Should be equivalent to:
=> vCont;s:p1.1
<= OK
=> vCont;c
<= OK
But gdbserver currently doesn't handle this. In the latter case,
"vCont;c" makes gdbserver clobber the previous step request. This
patch fixes that.
Note the server side must ignore resume actions for the thread that
has a pending %Stopped notification (and any other threads with events
pending), until GDB acks the notification with vStopped. Otherwise,
e.g., the following case is mishandled:
#1 => g (or any other packet)
#2 <= [registers]
#3 <= %Stopped T05 thread:p1.2
#4 => vCont s:p1.1;c
#5 <= OK
Above, the server must not resume thread p1.2 when it processes the
vCont. GDB can't know that p1.2 stopped until it acks the %Stopped
notification. (Otherwise it wouldn't send a default "c" action.)
(The vCont documentation already specifies this.)
Finally, special care must also be given to handling fork/vfork
events. A (v)fork event actually tells us that two processes stopped
-- the parent and the child. Until we follow the fork, we must not
resume the child. Therefore, if we have a pending fork follow, we
must not send a global wildcard resume action (vCont;c). We can still
send process-wide wildcards though.
(The comments above will be added as code comments to gdb in a follow
up patch.)
gdb/gdbserver/ChangeLog:
2016-10-26 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Link parent/child fork
threads.
(linux_wait_1): Unlink them.
(linux_set_resume_request): Ignore resume requests for
already-resumed and unhandled fork child threads.
* linux-low.h (struct lwp_info) <fork_relative>: New field.
* server.c (in_queued_stop_replies_ptid, in_queued_stop_replies):
New functions.
(handle_v_requests) <vCont>: Don't call require_running.
* server.h (in_queued_stop_replies): New declaration.
I got the following warning if I build GDBserver for aarch64_be-linux-gnu,
git/gdb/gdbserver/linux-aarch64-low.c:1539:39: error: invalid conversion from 'void*' to 'uint32_t* {aka unsigned int*}' [-fpermissive]
uint32_t *le_buf = xmalloc (byte_len);
^
The patch is to fix the warning.
gdb/gdbserver:
2016-10-24 Yao Qi <yao.qi@linaro.org>
PR server/20733
* linux-aarch64-low.c (append_insns): Cast the return value to
'uint32_t *'.
This patch shares "enum arm_breakpoint_kinds", and use ARM_BP_KIND_THUMB2
in GDB.
gdb:
2016-10-10 Yao Qi <yao.qi@linaro.org>
* arch/arm.h (enum arm_breakpoint_kinds): New.
* arm-tdep.c (arm_remote_breakpoint_from_pc): Use
ARM_BP_KIND_THUMB2.
gdb/gdbserver:
2016-10-10 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (enum arm_breakpoint_kinds): Remove.
This simple commit consolidates the API of
target_supports_multi_process. Since both GDB and gdbserver use the
same function prototype, all that was needed was to move create this
prototype on gdb/target/target.h and turn the macros declared on
gdb/{,gdbserver/}target.h into actual functions.
Regtested (clean pass) on the BuildBot.
gdb/ChangeLog:
2016-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (target_supports_multi_process): New function, moved
from...
* target.h (target_supports_multi_process): ... here. Remove
macro.
* target/target.h (target_supports_multi_process): New prototype.
gdb/gdbserver/ChangeLog:
2016-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (target_supports_multi_process): New function, moved
from...
* target.h (target_supports_multi_process): ... here. Remove
macro.
handle_tracepoint_bkpts has two parallel "if"s. This changes the
second one to check ipa_error_tracepoint, which seems to be what was
intended.
2016-10-05 Tom Tromey <tom@tromey.com>
PR remote/20655:
* tracepoint.c (handle_tracepoint_bkpts): Check
ipa_error_tracepoint, not ipa_stopping_tracepoint.
0a69eedb (Clean up the XML files for ARM) breaks the GDBserver build
on aarch64 because some arm-*.xml files can't be found.
This patch is to fix the build failure.
gdb/gdbserver:
2016-10-05 Yao Qi <yao.qi@linaro.org>
* configure.srv: Update the path of arm-*.xml files.
This patch is move features/arm-*.xml to features/arm/, and it is based
on Terry's patch posted here
https://sourceware.org/ml/gdb-patches/2014-06/msg00794.html
One comment to Terry's patch is about losing "arm" prefix, and the new
patch fixes this problem.
gdb:
2016-10-05 Terry Guo <terry.guo@arm.com>
Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Adjust includes.
* features/Makefile (WHICH): Add "arm/" directory to arm
target descriptions.
(XMLTOC): Likewise.
(arm/arm-with-iwmmxt.dat): Adjust the path for
dependencies.
* features/arm-core.xml: Moved to ...
* features/arm/arm-core.xml: ... it.
* features/arm-fpa.xml: Moved to ...
* features/arm/arm-fpa.xml: ... it.
* features/arm-m-profile.xml: Moved to ...
* features/arm/arm-m-profile.xm: ... it.
* features/arm-vfpv2.xml: Moved to ...
* features/arm/arm-vfpv2.xm: ... it.
* features/arm-vfpv3.xml: Moved to ...
* features/arm/arm-vfpv3.xml: ... it.
* features/arm-with-iwmmxt.c: Moved to ...
* features/arm/arm-with-iwmmxt.c: ... it.
* features/arm-with-iwmmxt.xml: Moved to ...
* features/arm/arm-with-iwmmxt.xml: ... it.
* features/arm-with-m-fpa-layout.c: Moved to ...
* features/arm/arm-with-m-fpa-layout.c: ... it.
* features/arm-with-m-fpa-layout.xml: Moved to ...
* features/arm/arm-with-m-fpa-layout.xml: ... it.
* features/arm-with-m-vfp-d16.c: Moved to ...
* features/arm/arm-with-m-vfp-d16.c: ... it.
* features/arm-with-m-vfp-d16.xml: Moved to ...
* features/arm/arm-with-m-vfp-d16.xml: ... it.
* features/arm-with-m.c: Moved to ...
* features/arm/arm-with-m.c: ... it.
* features/arm-with-m.xml: Moved to ...
* features/arm/arm-with-m.xm: ... it.
* features/arm-with-neon.c: Moved to ...
* features/arm/arm-with-neon.c: ... it.
* features/arm-with-neon.xml: Moved to ...
* features/arm/arm-with-neon.xml: ... it.
* features/arm-with-vfpv2.c: Moved to ...
* features/arm/arm-with-vfpv2.c: ... it.
* features/arm-with-vfpv2.xml: Moved to ...
* features/arm/arm-with-vfpv2.xml: ... it.
* features/arm-with-vfpv3.c: Moved to ...
* features/arm/arm-with-vfpv3.c: ... it.
* features/arm-with-vfpv3.xml: Moved to ...
* features/arm/arm-with-vfpv3.xml: ... it.
* features/xscale-iwmmxt.xml: Moved to ...
* features/arm/xscale-iwmmxt.xml: ... it.
gdb/gdbserver:
2016-10-05 Terry Guo <terry.guo@arm.com>
Yao Qi <yao.qi@linaro.org>
* Makefile.in: Adjust the path of rules.
* configure.srv: Update the path of xml files.
* regformats/arm-with-iwmmxt.dat: Regenerated.
* regformats/arm-with-neon.dat: Likewise.
* regformats/arm-with-vfpv2.dat: Likewise.
* regformats/arm-with-vfpv3.dat Likewise.
Commit 049a8570 (Use target_continue{,_no_signal} instead of target_resume)
replaces the code stopping lwp with target_continue_no_signal in
target_stop_and_wait, like this,
- resume_info.thread = ptid;
- resume_info.kind = resume_stop;
- resume_info.sig = GDB_SIGNAL_0;
- (*the_target->resume) (&resume_info, 1);
+ target_continue_no_signal (ptid);
the replacement is not equivalent, and it causes PR 20627. This patch
is just to revert that change.
Regression testing it on x86_64-linux.
gdb/gdbserver:
2016-09-30 Yao Qi <yao.qi@linaro.org>
PR gdbserver/20627
* target.c (target_stop_and_wait): Don't call
target_continue_no_signal, use resume_stop instead.
When I read the GDBserver debug message, I find the "entering" of
linux_wait_1 doesn't match the "existing" of linux_wait_1. Looks
we don't call debug_exit somewhere in linux_wait_1 on return.
gdb/gdbserver:
2016-09-26 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_wait_1): Call debug_exit.
If xmalloc fails allocating memory, usually because something tried a
huge allocation, like xmalloc(-1) or some such, GDB asks the user what
to do:
.../src/gdb/utils.c:1079: internal-error: virtual memory exhausted.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
If the user says "n", that throws a QUIT exception, which is caught by
one of the multiple CATCH(RETURN_MASK_ALL) blocks somewhere up the
stack.
The default implementations of operator new / operator new[] call
malloc directly, and on memory allocation failure throw
std::bad_alloc. Currently, if that happens, since nothing catches it,
the exception escapes out of main, and GDB aborts from unhandled
exception.
This patch replaces the default operator new variants with versions
that, just like xmalloc:
#1 - Raise an internal-error on memory allocation failure.
#2 - Throw a QUIT gdb_exception, so that the exact same CATCH blocks
continue handling memory allocation problems.
A minor complication of #2 is that operator new can _only_ throw
std::bad_alloc, or something that extends it:
void* operator new (std::size_t size) throw (std::bad_alloc);
That means that if we let a gdb QUIT exception escape from within
operator new, the C++ runtime aborts due to unexpected exception
thrown.
So to bridge the gap, this patch adds a new gdb_quit_bad_alloc
exception type that inherits both std::bad_alloc and gdb_exception,
and throws _that_.
If we decide that we should be catching memory allocation errors in
fewer places than all the places we currently catch them (everywhere
we use RETURN_MASK_ALL currently), then we could change operator new
to throw plain std::bad_alloc then. But I'm considering such a change
as separate matter from this one -- it'd make sense to do the same to
xmalloc at the same time, for instance.
Meanwhile, this allows using new/new[] instead of xmalloc/XNEW/etc.
without losing the "virtual memory exhausted" internal-error
safeguard.
Tested on x86_64 Fedora 23.
gdb/ChangeLog:
2016-09-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/new-op.c.
(COMMON_OBS): Add common/new-op.o.
(new-op.o): New rule.
* common/common-exceptions.h: Include <new>.
(struct gdb_quit_bad_alloc): New type.
* common/new-op.c: New file.
gdb/gdbserver/ChangeLog:
2016-09-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/new-op.c.
(OBS): Add common/new-op.o.
(new-op.o): New rule.
This patch adds a bunch of generated files to gdb's gitignore files.
There are still a bunch of "stamp" files that are not ignored, but I
think the rule for them should be put in the top-level gitignore.
Users and developers are encouraged to build out-of-tree, but some
people prefer the simplicity to build in-tree, so it should be useful
for them.
gdb/ChangeLog:
* .gitignore: Ignore more files.
* data-directory/.gitignore: Likewise.
gdb/doc/ChangeLog:
* .gitignore: New file.
gdb/gdbserver/ChangeLog:
* .gitinore: Ignore more files.
gdb/testsuite/ChangeLog:
* .gitignore: New file.
In patch https://sourceware.org/ml/gdb-patches/2016-04/msg00529.html
I cleared reserved bits when reading CPSR. It makes a problem that
these bits (zero) are written back to kernel through ptrace, and it
changes the state of the processor on some recent kernel, which is
unexpected.
In this patch, I keep these reserved bits when write CPSR back to
hardware.
gdb:
2016-09-21 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c (aarch32_gp_regcache_collect): Keep
bits 20 to 23.
gdb/gdbserver:
2016-09-21 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (arm_fill_gregset): Keep bits 20 to
23.
This patch consolidates the API of target_mourn_inferior between GDB
and gdbserver, in my continuing efforts to make sharing the
fork_inferior function possible between both.
GDB's version of the function did not care about the inferior's ptid
being mourned, but gdbserver's needed to know this information. Since
it actually makes sense to pass the ptid as an argument, instead of
depending on a global value directly (which GDB's version did), I
decided to make the generic API to accept it. I then went on and
extended all calls being made on GDB to include a ptid argument (which
ended up being inferior_ptid most of the times, anyway), and now we
have a more sane interface.
On GDB's side, after talking to Pedro a bit about it, we decided that
just an assertion to make sure that the ptid being passed is equal to
inferior_ptid would be enough for now, on the GDB side. We can remove
the assertion and perform more operations later if we ever pass
anything different than inferior_ptid.
Regression tested on our BuildBot, everything OK.
I'd appreciate a special look at gdb/windows-nat.c's modification
because I wasn't really sure what to do there. It seemed to me that
maybe I should build a ptid out of the process information there, but
then I am almost sure the assertion on GDB's side would trigger.
gdb/ChangeLog:
2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
* darwin-nat.c (darwin_kill_inferior): Adjusting call to
target_mourn_inferior to include ptid_t argument.
* fork-child.c (startup_inferior): Likewise.
* gnu-nat.c (gnu_kill_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_kill): Likewise.
* infrun.c (handle_inferior_event_1): Likewise.
* linux-nat.c (linux_nat_attach): Likewise.
(linux_nat_kill): Likewise.
* nto-procfs.c (interrupt_query): Likewise.
(procfs_interrupt): Likewise.
(procfs_kill_inferior): Likewise.
* procfs.c (procfs_kill_inferior): Likewise.
* record.c (record_mourn_inferior): Likewise.
* remote-sim.c (gdbsim_kill): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_kill): Likewise.
* target.c (target_mourn_inferior): Change declaration to accept
new ptid_t argument; use gdb_assert on it.
* target.h (target_mourn_inferior): Move function prototype from
here...
* target/target.h (target_mourn_inferior): ... to here. Adjust it
to accept new ptid_t argument.
* windows-nat.c (get_windows_debug_event): Adjusting call to
target_mourn_inferior to include ptid_t argument.
gdb/gdbserver/ChangeLog:
2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (start_inferior): Call target_mourn_inferior instead of
mourn_inferior; pass ptid_t argument to it.
(resume): Likewise.
(handle_target_event): Likewise.
* target.c (target_mourn_inferior): New function.
* target.h (mourn_inferior): Delete macro.
Add the function lwp_is_stepping which indicates whether the given LWP
is currently single-stepping. This is a common interface, usable from
native GDB as well as from gdbserver.
gdb/gdbserver/ChangeLog:
* linux-low.c (lwp_is_stepping): New function.
gdb/ChangeLog:
* nat/linux-nat.h (lwp_is_stepping): New declaration.
* linux-nat.c (lwp_is_stepping): New function.
The last commit was supposed to have the reference to ptrace () removed.
The patch didn't get updated correctly before the commit. This commit
fixes the comment as requested
gdbserver/ChangeLog
2016-09-06 Carl Love <cel@us.ibm.com>
* server.c (start_inferior): Fixed comment, requested comment change
didn't get updated correctly. Removed reference to ptrace () call as
it is only true on Linux systems.
The test checks to make sure GDB exits cleanly if there is
no valid target binary. Currently, ppc and S390 fail on this
test. The function target_post_create_inferior () calls
linux_post_create_inferior () which calls the architecture
specific functions s390_arch_setup () and ppc_arch_setup ()
which make ptrace calls to access the architecture specific
registers. These ptrace calls fail because the process does
not exist causing GDB to exit on error.
This patch checks to see if the initial ptrace (PTRACE_TRACEME, ...)
call returned a status of TARGET_WAITKIND_EXITED indicating the
target has already exited. If the target has exited, then the
target_post_create_inferior () is not called since there is no
inferior to be setup. The test to see if the initial ptrace
call succeeded is done after the ptrace (PTRACE_TRACEME, ...)
call and the wait for the inferior process to stop, assuming
it exists, has occurred.
The patch has been tested on X86 64-bit, ppc64 and s390. If
fixes the test failures on ppc64 and s390. The test does not
fail on X86 64-bit. The patch does not introduce any additional
regression failures on any of these three platforms.
gdbserver/ChangeLog
2016-09-06 Carl Love <cel@us.ibm.com>
* server.c (start_inferior): Do not call
function target_post_create_inferior () if the
inferior process has already exited.
This removes all support for building gdb & gdbserver with a C
compiler from gdb & gdbserver's build machinery.
gdb/ChangeLog:
2016-09-05 Pedro Alves <palves@redhat.com>
* NEWS: Mention that a C++ compiler is now required.
* Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
(COMPILE.pre, CC_LD): Use CXX directly.
(INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
* acinclude.m4: Don't include build-with-cxx.m4.
* build-with-cxx.m4: Delete file.
* configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
* warning.m4: Assume $enable_build_with_cxx is yes.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-09-05 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
(COMPILE.pre, CC_LD): Use CXX directly.
(INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
* acinclude.m4: Don't include build-with-cxx.m4.
* configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
* configure: Regenerate.
reinsert_breakpoint is used for software single step, so it is more
clear to rename it to single_step_breakpoint. This was pointed out in
the review https://sourceware.org/ml/gdb-patches/2016-05/msg00429.html
I don't rename "other_breakpoint" in this patch.
gdb/gdbserver:
2016-09-02 Yao Qi <yao.qi@linaro.org>
* linux-low.c: Replace "reinsert_breakpoints" with
"single_step_breakpoints". Replace "reinsert breakpoints"
with "single-step breakpoints".
* mem-break.c: Likewise.
* mem-break.h: Likewise.
This commit moves the target_wait prototype from the GDB-specific
target.h header to the common target/target.h header. Then, it
creates a compatible implementation of target_wait on gdbserver using
the_target->wait, and adjusts the (only) caller (mywait function).
Pretty straightforward, no regressions introduced.
gdb/gdbserver/ChangeLog:
2016-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (mywait): Call target_wait instead of
the_target->wait.
(target_wait): New function.
gdb/ChangeLog:
2016-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
* target.c (target_wait): Mention that the function's prototype
can be found at target/target.h.
* target.h (target_wait): Move prototype from here...
* target/target.h (target_wait): ... to here.
This commit implements a new function, target_continue, on top of the
target_resume function. Then, it replaces all calls to target_resume
by calls to target_continue or to the already existing
target_continue_no_signal.
This is one of the (many) necessary steps needed to consolidate the
target interface between GDB and gdbserver. In particular, I am
interested in the impact this change will have on the unification of
the fork_inferior function (which I have been working on).
Tested on the BuildBot, no regressions introduced.
gdb/gdbserver/ChangeLog:
2016-09-31 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (start_inferior): New variable 'ptid'. Replace calls
to the_target->resume by target_continue{,_no_signal}, depending
on the case.
* target.c (target_stop_and_wait): Call target_continue_no_signal
instead of the_target->resume.
(target_continue): New function.
gdb/ChangeLog:
2016-09-31 Sergio Durigan Junior <sergiodj@redhat.com>
* fork-child.c (startup_inferior): Replace calls to target_resume
by target_continue{,_no_signal}, depending on the case.
* linux-nat.c (cleanup_target_stop): Call
target_continue_no_signal instead of target_resume.
* procfs.c (procfs_wait): Likewise.
* target.c (target_continue): New function.
* target/target.h (target_continue): New prototype.
This patch fixes imbalanced lwp_suspend/unsuspend calls caused by the
premature choosing of another event for fairness.
select_event_lwp would switch the event before a call to
unsuspend_all_lwps, thus it would be called with the wrong event.
This caused an assertion failure: unsuspend LWP xx, suspended=-1 when
testing gdb.threads/non-stop-fair-events.exp with ARM range stepping in
GDBServer.
This patch moves the switch of event after the unsuspend/unstop calls.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-native.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_wait_1): Move event switch after unsuspend_lwps.
GLIBC BZ#20311 [1] proc_service.h install patch also remove 'const'
attributes from ps_get_thread_area and comment #15 discuss why to remove
the const attribute (basically since it a callback with the struct
ps_prochandle owned by the client it should be able to modify it if
it the case).
On default build this is not the issue and current g++ does not trigger
any issue with this mismatch declaration. However, on some bootstrap
build configuration where gdbserver is build with gcc instead this
triggers:
error: conflicting types for 'ps_get_thread_area'
This patch fixes it by syncing the declaration with GLIBC.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=20311
gdb/ChangeLog:
2016-08-25 Adhemerval Zanella <adhemerval.zanella@linaro.org>
* aarch64-linux-nat.c (ps_get_thread_area): Remove const from
struct ps_prochandle.
* amd64-linux-nat.c (ps_get_thread_area): Likewise.
* arm-linux-nat.c (ps_get_thread_area): Likewise.
* gdb_proc_service.h (ps_get_thread_area): Likewise.
* i386-linux-nat.c (ps_get_thread_area): Likewise.
* m68klinux-nat.c (ps_get_thread_area): Likewise.
* mips-linux-nat.c (ps_get_thread_area): Likewise.
* nat/aarch64-linux.c (aarch64_ps_get_thread_area): Likewise.
* nat/aarch64-linux.h (aarch64_ps_get_thread_area): Likewise.
* xtensa-linux-nat.c (ps_get_thread_area): Likewise.
gdb/gdbserver/ChangeLog:
2016-08-25 Adhemerval Zanella <adhemerval.zanella@linaro.org>
PR server/20491
* gdb_proc_service.h (ps_get_thread_area): Remove const from struct
ps_prochandle.
* linux-aarch64-low.c (ps_get_thread_area): Likewise.
* linux-arm-low.c (ps_get_thread_area): Likewise.
* linux-crisv32-low.c (ps_get_thread_area): Likewise.
* linux-m68k-low.c (ps_get_thread_area): Likewise.
* linux-mips-low.c (ps_get_thread_area): Likewise.
* linux-nios2-low.c (ps_get_thread_area): Likewise.
* linux-tic6x-low.c (ps_get_thread_area): Likewise.
* linux-x86-low.c (ps_get_thread_area): Likewise.
* linux-xtensa-low.c (ps_get_thread_area): Likewise.
Running fast tracepoint tests on x32 exposes a latent bug in the agent
bytecode jitting. There's a code path that forgets to emit the call
opcode... Whoops. Fixes a bunch of gdb.trace/trace-condition.exp
FAILs, like:
(gdb)
continue
Continuing.
Thread 1 "trace-condition" received signal SIGSEGV, Segmentation fault.
0x7ffec016 in ?? ()
(gdb) FAIL: gdb.trace/trace-condition.exp: ftrace: $rip == *set_point: advance through tracing
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (amd64_emit_call): Emit missing call opcode.
We're casting through unsigned long to write a 64-bit immediate
operand of movabs (the comment said movl, but that was incorrect).
The problem is that unsigned long is 32-bit on x32, so we were writing
fewer bytes than necessary.
Fix this by using an 8 byte memcpy like in other similar places in the
function.
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (amd64_install_fast_tracepoint_jump_pad): Fix
comment. Use memcpy instead of casting through unsigned long.
MAP_32BIT is ignored on x32, meaning the jump pad can end up somewhere
between 2GB and 4GB, too far away from the executable for 5-byte
relative jumps (JMP rel32). So on x32, try explicitly placing the
jump pad near the middle of the available address space.
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* linux-amd64-ipa.c (alloc_jump_pad_buffer) [__ILP32__]: Try
allocating around 0x80000000.
Building GDB for x32 fails building the IPA, with:
.../src/gdb/gdbserver/linux-amd64-ipa.c: In function ‘const target_desc* get_ipa_tdesc(int)’:
.../src/gdb/gdbserver/linux-amd64-ipa.c:182:14: error: ‘tdesc_amd64_avx_linux’ was not declared in this scope
return tdesc_amd64_avx_linux;
^
.../src/gdb/gdbserver/linux-amd64-ipa.c:184:14: error: ‘tdesc_amd64_mpx_linux’ was not declared in this scope
return tdesc_amd64_mpx_linux;
^
.../src/gdb/gdbserver/linux-amd64-ipa.c:186:14: error: ‘tdesc_amd64_avx_mpx_linux’ was not declared in this scope
return tdesc_amd64_avx_mpx_linux;
^
[...]
The problem is that the IPA is trying to use the 64-bit descriptions,
when it should be using the x32 ones.
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
PR gdb/20415
* Makefile.in (x32-linux-ipa.o, x32-avx-linux-ipa.o)
(x32-avx512-linux-ipa.o): New rules.
* configure.ac (x86_64-*-linux*): New x32 check.
* configure.srv (ipa_x32_linux_regobj): New.
(x86_64-*-linux*): Use $ipa_x32_linux_regobj if building for x32.
* linux-amd64-ipa.c (get_ipa_tdesc) [__ILP32__]: Return x32
descriptions.
(initialize_low_tracepoint) [__ILP32__]: Initialize x32
descriptions.
* configure: Regenerate.
gdb's (or gdbserver's) own signal handling should not interfere with
the signal dispositions their spawned children inherit. However, it
currently does. For example, some paths in gdb cause SIGPIPE to be
set to SIG_IGN, and as consequence, the child starts with SIGPIPE to
set to SIG_IGN too, even though gdb was started with SIGPIPE set to
SIG_DFL.
This is because the exec family of functions does not reset the signal
disposition of signals that are set to SIG_IGN:
http://pubs.opengroup.org/onlinepubs/7908799/xsh/execve.html
Signals set to the default action (SIG_DFL) in the calling process
image are set to the default action in the new process
image. Signals set to be ignored (SIG_IGN) by the calling process
image are set to be ignored by the new process image. Signals set to
be caught by the calling process image are set to the default action
in the new process image (see <signal.h>).
And neither does it reset signal masks or flags.
In order to be transparent, when spawning new child processes to debug
(with "run", etc.), reset signal actions and mask back to what was
originally inherited from gdb/gdbserver's parent, just before execing
the target program to debug.
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (SFILES): Add
common/signals-state-save-restore.c.
(HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h.
(COMMON_OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* configure: Regenerate.
* fork-child.c: Include "signals-state-save-restore.h".
(fork_inferior): Call restore_original_signals_state.
* main.c: Include "signals-state-save-restore.h".
(captured_main): Call save_original_signals_state.
* common/common.m4: Add sigaction to AC_CHECK_FUNCS checks.
* common/signals-state-save-restore.c: New file.
* common/signals-state-save-restore.h: New file.
gdb/gdbserver/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* config.in: Regenerate.
* configure: Regenerate.
* linux-low.c: Include "signals-state-save-restore.h".
(linux_create_inferior): Call
restore_original_signals_state.
* server.c: Include "dispositions-save-restore.h".
(captured_main): Call save_original_signals_state.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* gdb.base/signals-state-child.c: New file.
* gdb.base/signals-state-child.exp: New file.
* gdb.gdb/selftest.exp (do_steps_and_nexts): Add new pattern.
We build by default with a C++ compiler, but "configure --help" still
says "--enable-build-with-cxx", which hints that it is by default
disabled. Update the --help text.
gdb/ChangeLog:
2016-08-05 Pedro Alves <palves@redhat.com>
* build-with-cxx.m4: Change help string to be in terms of
--disable-build-with-cxx.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-08-05 Pedro Alves <palves@redhat.com>
* configure: Regenerate.
When I run process-dies-while-detaching.exp with GDBserver, I see many
warnings printed by GDBserver,
ptrace(regsets_fetch_inferior_registers) PID=26183: No such process
ptrace(regsets_fetch_inferior_registers) PID=26183: No such process
ptrace(regsets_fetch_inferior_registers) PID=26184: No such process
ptrace(regsets_fetch_inferior_registers) PID=26184: No such process
regsets_fetch_inferior_registers is called when GDBserver resumes each
lwp.
#2 0x0000000000428260 in regsets_fetch_inferior_registers (regsets_info=0x4690d0 <aarch64_regsets_info>, regcache=0x31832020)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:5412
#3 0x00000000004070e8 in get_thread_regcache (thread=0x31832940, fetch=fetch@entry=1) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/regcache.c:58
#4 0x0000000000429c40 in linux_resume_one_lwp_throw (info=<optimized out>, signal=0, step=0, lwp=0x31832830)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4463
#5 linux_resume_one_lwp (lwp=0x31832830, step=<optimized out>, signal=<optimized out>, info=<optimized out>)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4573
The is the case that threads are disappeared when GDB/GDBserver resumes
them. We check errno for ESRCH, and don't print error messages, like
what we are doing in regsets_store_inferior_registers.
gdb/gdbserver:
2016-08-04 Yao Qi <yao.qi@linaro.org>
* linux-low.c (regsets_fetch_inferior_registers): Check
errno is ESRCH or not.
As a result of this commit,
9b4c5f878f
(Remove support for thread events without PTRACE_EVENT_CLONE in GDBServer.)
the last usage of td_ta_event_addr td_ta_set_event and
td_ta_event_getmsg were removed. They are no longer used. This patch
is to remove them.
gdb/gdbserver:
2016-08-02 Yao Qi <yao.qi@linaro.org>
* thread-db.c (struct thread_db) <td_ta_event_getmsg_p>: Remove.
<td_ta_set_event_p, td_ta_event_addr_p>: Remove.
(thread_db_load_search): Update.
(try_thread_db_load_1): Don't look for td_ta_event_addr,
td_ta_set_event and td_ta_event_getmsg.
Debugging an x32 process with an x32 gdbserver always results in:
(gdb) c
Continuing.
Program received signal SIGSEGV, Segmentation fault.
0xf7de9600 in _dl_debug_state () from target:/libx32/ld-linux-x32.so.2
(gdb)
Looking at the remote debug logs reveals the problem, here:
Packet received: T05swbreak:;06:a0d4ffff00000000;07:b8d3ffff00000000;10:0096def701000000;thread:p7d7a.7d7a;core:1;
^^^^^^^^^^^^^^^^
The underlined value is the expedited value of RIP (in little endian).
But notice that 01 in 0x01f7de9600, while gdb says the program stopped
at 0xf7de9600. 0x01ffffffff is over 32 bits, which indicates that
something wen't wrong somewhere in gdbserver.
The problem turns out to be in gdbserver's x86_get_pc / x86_set_pc
routines, where "unsigned long" is used assuming that it can fit a
64-bit value, while unsigned long is actually 32-bit on x32. The
result is that collect_register_by_name / supply_register_by_name end
up reading/writing random bytes off the stack.
Fix this by using explicit uint64_t instead of unsigned long.
For consistency, use uint32_t instead of unsigned int in the 32-bit
paths.
gdb/gdbserver/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
PR server/20414
* linux-x86-low.c (x86_get_pc, x86_set_pc): Use uint64_t instead
of unsigned long for 64-bit registers and use uint32_t instead of
unsigned int for 32-bit registers.
Building an x32 gdb trips on a static assertion:
In file included from .../src/gdb/common/common-defs.h:71:0,
from .../src/gdb/nat/amd64-linux-siginfo.c:21:
.../src/gdb/common/gdb_assert.h:26:66: error: size of array ‘never_defined_just_used_for_checking’ is negative
extern int never_defined_just_used_for_checking[(expr) ? 1 : -1]
^
.../src/gdb/nat/amd64-linux-siginfo.c:113:1: note: in expansion of macro ‘gdb_static_assert’
gdb_static_assert (sizeof (nat_siginfo_t) == sizeof (siginfo_t));
^
The problem is that the way nat_siginfo_t is defined, it can only
match the host's siginfo_t object when gdb is built as a 64-bit
program.
Several bits of nat_siginfo_t are off:
- nat_siginfo_t's _pad field's definition is:
int _pad[((128 / sizeof (int)) - 4)];
while /usr/include/bits/siginfo.h has:
# define __SI_MAX_SIZE 128
# if __WORDSIZE == 64
# define __SI_PAD_SIZE ((__SI_MAX_SIZE / sizeof (int)) - 4)
# else
# define __SI_PAD_SIZE ((__SI_MAX_SIZE / sizeof (int)) - 3)
# endif
and __WORDSIZE == 32 for x32. This is what causes the size of
nat_siginfo_t to be wrong and the assertion to fail.
- the nat_clock_t type is incorrect for 64-bit. We have this:
/* For native 64-bit, clock_t in _sigchld is 64bit aligned at 4 bytes. */
typedef long __attribute__ ((__aligned__ (4))) nat_clock_t;
however, /usr/include/bits/siginfo.h has:
# if defined __x86_64__ && __WORDSIZE == 32
/* si_utime and si_stime must be 4 byte aligned for x32 to match the
kernel. We align siginfo_t to 8 bytes so that si_utime and si_stime
are actually aligned to 8 bytes since their offsets are multiple of
8 bytes. */
typedef __clock_t __attribute__ ((__aligned__ (4))) __sigchld_clock_t;
# define __SI_ALIGNMENT __attribute__ ((__aligned__ (8)))
# else
typedef __clock_t __sigchld_clock_t;
# define __SI_ALIGNMENT
# endif
So we're currently forcing 4-byte alignment on clock_t, when it
should only be so for x32, not 64-bit.
The fix:
- Leaves nat_siginfo_t strictly for the 64-bit ABI.
- Adds a new typedef for the siginfo type that ptrace uses
(ptrace_siginfo_t). An x32 gdb always gets/sets an x32 siginfo_t
type with PTRACE_GETSIGINFO/PTRACE_SETSIGINFO.
- Uses this new ptrace_siginfo_t type instead of nat_siginfo_t as the
intermediate conversion type.
gdb/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (amd64_linux_siginfo_fixup): Rename 'native'
parameter to 'ptrace'.
* nat/amd64-linux-siginfo.c (GDB_SI_SIZE): New define.
(nat_uptr_t): New an unsigned long.
(nat_clock_t): Remove attribute __aligned__.
(struct nat_timeval): Delete.
(nat_siginfo_t): Remove attribute __aligned__.
(ptrace_siginfo_t): Define.
(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
(compat_x32_siginfo_from_siginfo)
(siginfo_from_compat_x32_siginfo): Make 'from' parameter const.
Convert through a ptrace_siginfo_t instead of a nat_siginfo_t.
Remove casts.
(amd64_linux_siginfo_fixup_common): Rename 'native' parameter to
'ptrace'. Remove static assertions.
(top level): New static assertions.
gdb/gdbserver/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (x86_siginfo_fixup): Rename 'native' parameter
to 'ptrace'.
Walfred Tedeschi
Antoine Tremblay
Joel Brobecker
Luis Machado
Simon Marchi
Pedro Alves
Yao Qi
Sergio Durigan Junior
Tom Tromey
Simon Marchi
Andreas Arnez
Carl E. Love
Akash Trehan
Adhemerval Zanella