* xtensa-isa.c (xtensa_state_is_shared_or): New function.
2008-11-21 Sterling Augustine <sterling@tensilica.com>
* xtensa-isa-internal.h (XTENSA_STATE_IS_SHARED_OR): New flag.
* xtensa-isa.h (xtensa_state_is_shared_or): New prototype.
2008-11-21 Sterling Augustine <sterling@tensilica.com>
* config/tc-xtensa.c (check_t1_t2_reads_and_writes): Call
xtensa_state_is_shared_or to allow multiple opcodes within a
single FLIX bundle to write to these special states.
(_bfd_elf_default_got_elt_size): Declare.
* elflink.c (struct alloc_got_off_arg): Replace member got_elt_size
by new member info.
(elf_gc_allocate_got_offsets): Adjust for calling bed->got_elt_size
to get the element size instead of using a gofarg entry.
(bfd_elf_gc_common_finalize_got_offsets): Similar.
(_bfd_elf_default_got_elt_size): New function.
* elfxx-target.h: New macro elf_backend_got_elt_size.
(elfNN_bed): Use it.
matching syscall entry point.
* gdb.base/foll-vfork.exp (tcatch_vfork_then_parent_follow)
(tcatch_vfork_then_child_follow): Likewise. Finish through
vfork even if we stopped at the syscall trampoline.
TLS_LD even when symbol is used with other TLS reloc types.
(ppc_elf_relocate_section): Bypass symbol checks when using tlsld_got.
Leave addend zero on LD DTPMOD dynamic reloc.
(frv_gdbarch_init): Register frv_skip_main_prologue.
* solib-frv.c (fetch_loadmap): Return early when no segments are
found.
(frv_relocate_main_executable): Return early when both interpreter
and executable loadmap addresses are zero.
(putpkt_binary, read_frame, getpkt_or_notif_sane_1): Use it. Make
sure debug output printing a packet buffer goes through a single
fprintf_unfiltered call.
* utils.c (vfprintf_unfiltered): If outputting timestamps, end
output with a newline if it wasn't going to already.
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Treat WPLT30 relocs
against local symbols in 64-bit binaries as if they were WDISP30
relocs.
(_bfd_sparc_elf_relocate_section): Likewise.
* features/Makefile (rs6000/powerpc-isa205-32l-expedite,
rs6000/powerpc-isa205-altivec32l-expedite,
powerpc-isa205-vsx32l-expedite, rs6000/powerpc-isa205-64l-expedite,
rs6000/powerpc-isa205-altivec64l-expedite,
powerpc-isa205-vsx64l-expedite): New variables.
* regformats/rs6000/powerpc-isa205-32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx64l.dat: Generate.
gdbserver/
* Makefile.in (powerpc-isa205-32l.o, powerpc-isa205-32l.c,
powerpc-isa205-altivec32l.o, powerpc-isa205-altivec32l.c,
powerpc-isa205-vsx32l.o, powerpc-isa205-vsx32l.c,
powerpc-isa205-64l.o, powerpc-isa205-64l.c,
powerpc-isa205-altivec64l.o, powerpc-isa205-altivec64l.c,
powerpc-isa205-vsx64l.o, powerpc-isa205-vsx64l.c): New targets.
* configure.srv (powerpc*-*-linux*): Add ISA 2.05 object files and
XML target descriptions.
* linux-ppc-low.c (ppc_arch_setup): Init registers with 64-bit FPSCR
when inferior is running on an ISA 2.05 or later processor. Add
special case to return offset for full 64-bit slot of FPSCR when
in 32-bits.
* ppc-linux-nat.c (ppc_register_u_addr): Add special case to return
offset for full 64-bit slot of FPSCR when in 32-bits.
(ppc_linux_read_description): Return target description with 64-bit
FPSCR when inferior is running on an ISA 2.05 or later processor.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Call
initialize_tdec_powerpc_isa205_32l,
initialize_tdec_powerpc_isa205_altivec32l,
initialize_tdec_powerpc_isa205_vsx32l,
initialize_tdec_powerpc_isa205_64l,
initialize_tdec_powerpc_isa205_altivec64l and
initialize_tdec_powerpc_isa205_vsx64l.
* ppc-linux-tdep.h: Add external declaration for
tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l,
tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_isa205_64l,
tdesc_powerpc_isa205_altivec64l and tdesc_powerpc_isa205_vsx64l.
* features/rs600/powerpc-fpu-isa205.xml: New file.
* features/rs600/powerpc-isa205-32l.xml: New file.
* features/rs600/powerpc-isa205-64l.xml: New file.
* features/rs600/powerpc-isa205-altivec32l.xml: New file.
* features/rs600/powerpc-isa205-altivec64l.xml: New file.
* features/rs600/powerpc-isa205-vsx32l.xml: New file.
* features/rs600/powerpc-isa205-vsx64l.xml: New file.
* features/rs600/powerpc-isa205-32l.c: Generate.
* features/rs600/powerpc-isa205-64l.c: Generate.
* features/rs600/powerpc-isa205-altivec32l.c: Generate.
* features/rs600/powerpc-isa205-altivec64l.c: Generate.
* features/rs600/powerpc-isa205-vsx32l.c: Generate.
* features/rs600/powerpc-isa205-vsx64l.c: Generate.
gdb/testsuite/
* gdb.arch/ppc-dfp.exp: New file.
* gdb.arch/ppc-dfp.c: New file.
* configure: Regenerated.
* configure.ac: Add test for System V shared memory and semaphore.
* debug.c, debug.h: Add trace support for new devices.
* hw_sem.c, hw_shm.c: New files.
* Makefile.in: Add hw_sem.c and hw_shm.c.
(read_n_bytes): Remove unhelpful comment.
(read_indirect_string): Pass symbol table to read_section in case
the .debug_str section needs relocating.
PR 7037
* elf32-cr16.c (cr16_elf_howto_table): Zero the src_mask field of
the reloc descriptions.
* infrun.c (clear_proceed_status_thread): New function.
(clear_proceed_status_callback): New function.
(clear_proceed_status): In all-stop mode, clear per-thread
proceed status of *all* threads, not only the current.
(handle_inferior_event): In all-stop mode, if we're stepping
one thread, but got some inferior event in another thread
that does not cause GDB to break to the user interface,
ensure the interrupted stepping operation continues in the
original thread.
(currently_stepping): Move thread-related tests to ...
(currently_stepping_thread): ... this new function.
(currently_stepping_callback): New function.
* mi/mi-common.h (struct mi_interp): New, moved from ...
* mi/mi-interp.c: ...here.
* mi/mi-main.c (mi_execute_command): If the thread changed
as result of command, report that.
* mi/mi-main.c (proceed_thread_callback): New.
(mi_cmd_exec_continue): If --thread-group is specified, resume all
threads in that group.
(interrupt_thread_callback): New.
(mi_cmd_exec_interrupt): If --thread-group is specified, interrupt
all threads in that group.
