In the case where the GNAT runtime was built with full debugging info,
several of the exceptions defined there might have a name contain
the word "global". To make this less likely, this patch renames
the exception name, replacing "Global" by "Global_GDB". It still
keeps the exeption name relatively short, while it is unlikely that
the GNAT runtime has an exception whose name explicitly mentions GDB,
and even less likely that it contains "Global_GDB".
gdb/testsuite/ChangeLog:
* info_exc/const.ads (Aint_Global_GDB_E): Renames Aint_Global_E.
* info_exc/foo.adb: Adjust to new exception name.
* info_exc.exp: Adjust after exception renaming in const.ads.
Update "info exception global" test to test "info exceptions
global_gdb" instead.
* mi_exc_info/const.ads (Aint_Global_GDB_E): Renames Aint_Global_E.
* mi_exc_info/foo.adb (Adjust to new exception name.
* mi_exc_info.exp: Adjust after exception renaming in const.ads.
Update "-info-ada-exceptions global" test to test
"-info-ada-exceptions global_gdb" instead.
of inferior output for remote and native sessions.
* gdb.mi/mi-console.exp: Remove obsolete comment.
Check for semihosted inferior output pattern.
(semihosted_string): New function.
If the runtime has full debug info, then the non-standard exceptions
declared in the GNAT runtime will appear in the list of exceptions
printed by GDB ("info exceptions" or "-info-ada-exceptions").
This is valid output, so this patch allows for it.
gdb/testsuite/ChangeLog:
* gdb.ada/info_exc.exp: Allow other global exceptions to be
listed in the output of "info exceptions".
* gdb.ada/mi_exc_info.exp: Allow other global exceptions to be
listed in the output of "-info-ada-exceptions".
This patch fixes some spurious failures when the inferior is linked
against the shared version of libgnat by default, as appears to be
the case on many GNU/Linux distributions. When that happens, we have
to start the program in order to ensure that the GNAT runtime is
mapped to memory, in order for us to find the standard exceptions
(defined within the runtime). Otherwise, they will not be shown,
as expected, by the debugger.
gdb/testsuite/ChangeLog:
* gdb.ada/info_exc.exp: Start inferior before starting
the "info exceptions" tests.
* gdb.ada/mi_exc_info.exp: Start inferior before starting
the "-info-ada-exceptions" tests.
This patch fixes PR c++/16117.
gdb has an extension so that users can use expressions like FILE::NAME
to choose a variable of the given name from the given file. The bug
is that this extension takes precedence over ordinary C++ expressions
of the same form. You might think this is merely hypothetical, but
now that C++ headers commonly do not use an extension, it is more
common.
This patch fixes the bug by making two related changes. First, it
changes gdb to prefer the ordinary C++ meaning of a symbol over the
extended meaning. Second, it arranges for single-quoting of the
symbol to indicate a preference for the extension.
Built and regtested on x86-64 Fedora 18.
New test case included.
2013-11-15 Tom Tromey <tromey@redhat.com>
PR c++/16117:
* c-exp.y (lex_one_token): Add "is_quoted_name" argument.
(classify_name): Likewise. Prefer a field of "this" over a
filename.
(classify_inner_name, yylex): Update.
2013-11-15 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Variables): Note gdb rules for ambiguous cases.
Add example.
2013-11-15 Tom Tromey <tromey@redhat.com>
* gdb.cp/includefile: New file.
* gdb.cp/filename.exp: New file.
* gdb.cp/filename.cc: New file.
Consider the following code, compiled at -O2 on ppc-linux:
procedure Increment (Val : in out Float; Msg : String);
The implementation does not really matter in this case). In our example,
this function is being called from a function with Param_1 set to 99.0.
Trying to break inside that function, and running until reaching that
breakpoint yields:
(gdb) b increment
Breakpoint 1 at 0x100014b4: file callee.adb, line 6.
(gdb) run
Starting program: /[...]/foo
Breakpoint 1, callee.increment (val=99.0, val@entry=0.0, msg=...)
at callee.adb:6
6 if Val > 200.0 then
The @entry value for parameter "val" is incorrect, it should be 99.0.
The associated call-site parameter DIE looks like this:
.uleb128 0xc # (DIE (0x115) DW_TAG_GNU_call_site_parameter)
.byte 0x2 # DW_AT_location
.byte 0x90 # DW_OP_regx
.uleb128 0x21
.byte 0x3 # DW_AT_GNU_call_site_value
.byte 0xf5 # DW_OP_GNU_regval_type
.uleb128 0x3f
.uleb128 0x25
The DW_AT_GNU_call_site_value uses a DW_OP_GNU_regval_type
operation, referencing register 0x3f=63, which is $f31,
an 8-byte floating register. In that register, the value is
stored using the usual 8-byte float format:
(gdb) info float
f31 99.0 (raw 0x4058c00000000000)
The current code evaluating DW_OP_GNU_regval_type operations
currently is (dwarf2expr.c:execute_stack_op):
result = (ctx->funcs->read_reg) (ctx->baton, reg);
result_val = value_from_ulongest (address_type, result);
result_val = value_from_contents (type,
value_contents_all (result_val));
What the ctx->funcs->read_reg function does is read the contents
of the register as if it contained an address. The rest of the code
continues that assumption, thinking it's OK to then use that to
create an address/ulongest struct value, which we then re-type
to the type specified by DW_OP_GNU_regval_type.
We're getting 0.0 above because the read_reg implementations
end up treating the contents of the FP register as an integral,
reading only 4 out of the 8 bytes. Being a big-endian target,
we read the high-order ones, which gives us zero.
This patch fixes the problem by introducing a new callback to
read the contents of a register as a given type, and then adjust
the handling of DW_OP_GNU_regval_type to use that new callback.
gdb/ChangeLog:
* dwarf2expr.h (struct dwarf_expr_context_funcs) <read_reg>:
Extend the documentation a bit.
<get_reg_value>: New field.
* dwarf2loc.c (dwarf_expr_get_reg_value)
(needs_frame_get_reg_value): New functions.
(dwarf_expr_ctx_funcs, needs_frame_ctx_funcs): Add "get_reg_value"
callback.
* dwarf2-frame.c (get_reg_value): New function.
(dwarf2_frame_ctx_funcs): Add "get_reg_value" callback.
* dwarf2expr.c (execute_stack_op) <DW_OP_GNU_regval_type>:
Use new callback to compute result_val.
gdb/testsuite/ChangeLog:
* gdb.ada/O2_float_param: New testcase.
Pedro pointed out that it is handy for "make check" to print a summary
of the results. This happens in the check-single case and also if you
invoke runtest by hand.
This patch implements the same thing for check-parallel.
2013-11-14 Tom Tromey <tromey@redhat.com>
* Makefile.in (check-parallel): Print summary from gdb.sum.
dw2-case-insensitive.exp: p fuNC_lang fails on arm. The problem occurs
when thumb mode code is generated. On ARM last bit of function pointer
value indicates whether the target function is an ARM (if 0) or Thumb
(if 1) routine. The PC address should refer to actual address in
either case. This patch adds new compile unit and function labels to
code which act as address ranges of compile unit and functions in
debug information. Therefore address ranges will have correct
addresses and not the ones with an incremented least significant bit.
This patch has been tested on x86_64 and arm machines.
gdb/testsuite/ChangeLog:
2013-11-14 Omair Javaid <Omair.Javaid@linaro.org>
* gdb.dwarf2/dw2-case-insensitive-debug.S: Updated compile unit
and function label names.
* gdb.dwarf2/dw2-case-insensitive.c: Created function and
compile unit labels.
Frontend sometimes need to evaluate expressions that are
language-specific. For instance, Eclipse uses the following
expression to determine the size of an address on the target:
-data-evaluate-expression "sizeof (void*)"
Unfortunately, if the main of the program being debugged is not C,
this may not work. For instance, if the main is in Ada, you get...
-data-evaluate-expression "sizeof (void*)"
^error,msg="No definition of \"sizeof\" in current context."
... and apparently decides to stop the debugging session as a result.
The recommendation sent was to specifically set the language to C
before trying to evaluate the expression. Something such as:
1. save current language
2. set language c
3. -data-evaluate-expression "sizeof (void*)"
4. Restore language
This has the same disadvantages as the ones outlined in the "Context
Management" section of the GDB/MI documentation regarding setting
the current thread or the current frame, thus recommending the use of
general command-line switches such as --frame, or --thread instead.
This patch follows the same steps for the language, adding a similar
new command option: --language LANG. Example of use:
-data-evaluate-expression --language c "sizeof (void*)"
^done,value="4"
gdb/ChangeLog:
* mi/mi-parse.h (struct mi_parse) <language>: New field.
* mi/mi-main.c (mi_cmd_execute): Temporarily set language to
PARSE->LANGUAGE during command execution, if set.
* mi/mi-parse.c: Add "language.h" #include.
(mi_parse): Add parsing of "--language" command option.
* NEWS: Add entry mentioning the new "--language" command option.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-language.exp: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Show): Add xref anchor for "show language" command.
(Context management): Place current subsection text into its own
subsubsection. Add new subsubsection describing the "--language"
command option.
I noticed today that multi-arch-exec.exp was failing in parallel mode.
The bug is that multi-arch-exec.c assumes the non-parallel directory
layout.
This patch fixes the problem using the same "BASEDIR" approach used in
other tests.
Tested both ways on x86-64 Fedora 18.
I'm checking this in.
2013-11-13 Tom Tromey <tromey@redhat.com>
* gdb.multi/multi-arch-exec.exp: Define BASEDIR when compiling.
* gdb.multi/multi-arch-exec.c (main): Use BASEDIR.
This patch implements a new GDB/MI command implementing the equivalent
of the "info exceptions" CLI command. The command syntax is:
-info-ada-exceptions [REGEXP]
Here is an example of usage (slightly formatted by hand to make it
easier to read):
-info-ada-exceptions ions\.a_
^done,ada-exceptions=
{nr_rows="2",nr_cols="2",
hdr=[{width="1",alignment="-1",col_name="name",colhdr="Name"},
{width="1",alignment="-1",col_name="address",colhdr="Address"}],
body=[{name="global_exceptions.a_global_exception",
address="0x0000000000613a80"},
{name="global_exceptions.a_private_exception",
address="0x0000000000613ac0"}]}
Also, in order to allow graphical frontends to easily determine
whether this command is available or not, the output of the
"-list-features" command has been augmented to contain
"info-ada-exceptions".
gdb/Changelog:
* mi/mi-cmds.h (mi_cmd_info_ada_exceptions): Add declaration.
* mi/mi-cmds.c (mi_cmds): Add entry for -info-ada-exceptions
command.
* mi/mi-cmd-info.c: #include "ada-lang.c" and "arch-utils.c".
(mi_cmd_info_ada_exceptions): New function.
* mi/mi-main.c (mi_cmd_list_features): Add "info-ada-exceptions".
gdb/testsuite/ChangeLog:
* gdb.ada/mi_exc_info: New testcase.
This patch adds a new command "info exceptions" whose purpose is to
provide the list of exceptions currently defined in the inferior.
The usage is:
(gdb) info exceptions [REGEXP]
Without argument, the command lists all exceptions. Otherwise,
only those whose name match REGEXP are listed.
For instance:
(gdb) info exceptions
All defined Ada exceptions:
constraint_error: 0x613dc0
program_error: 0x613d40
storage_error: 0x613d00
tasking_error: 0x613cc0
global_exceptions.a_global_exception: 0x613a80
global_exceptions.a_private_exception: 0x613ac0
The name of the command, as well as its output is part of a legacy
I inherited long ago. It's output being parsed by frontends such as
GPS, I cannot easily change it. Same for the command name.
The implementation is mostly self-contained, and is written in a way
that should make it easy to implement the GDB/MI equivalent. The
careful reviewer will notice that the code added in ada-lang.h could
normally be made private inside ada-lang.c. But these will be used
by the GDB/MI implementation. Rather than making those private now,
only to move them later, I've made them public right away.
gdb/ChangeLog:
* ada-lang.h: #include "vec.h".
(struct ada_exc_info): New.
(ada_exc_info): New typedef.
(DEF_VEC_O(ada_exc_info)): New vector.
(ada_exceptions_list): Add declaration.
* ada-lang.c (ada_is_exception_sym)
(ada_is_non_standard_exception_sym, compare_ada_exception_info)
(sort_remove_dups_ada_exceptions_list)
(ada_exc_search_name_matches, ada_add_standard_exceptions)
(ada_add_exceptions_from_frame, ada_add_global_exceptions)
(ada_exceptions_list_1, ada_exceptions_list)
(info_exceptions_command): New function.
(_initialize_ada_language): Add "info exception" command.
gdb/testsuite/ChangeLog:
* gdb.ada/info_exc: New testcase.
When using the GDB/MI commands to insert a catchpoint on a specific
Ada exception, any re-evaluation of that catchpoint (for instance
a re-evaluation performed after a shared library got mapped by the
inferior) fails. For instance, with any Ada program:
(gdb)
-catch-exception -e program_error
^done,bkptno="1",bkpt={[...]}
(gdb)
-exec-run
=thread-group-started,id="i1",pid="28315"
=thread-created,id="1",group-id="i1"
^running
*running,thread-id="all"
(gdb)
=library-loaded,[...]
&"warning: failed to reevaluate internal exception condition for catchpoint 1: No definition of \"exec\" in current context.\n"
&"warning: failed to reevaluate internal exception condition for catchpoint 1: No definition of \"exec\" in current context.\n"
[...]
The same is true if using an Ada exception catchpoint.
The problem comes from the fact that that we deallocate the strings
given as arguments to create_ada_exception_catchpoint, while the latter
just makes shallow copies of those strings, thus creating dandling
pointers.
This patch fixes the issue by passing freshly allocated strings to
create_ada_exception_catchpoint, while at the same time updating
create_ada_exception_catchpoint's documentation to make it clear
that deallocating the strings is no longer the responsibility of
the caller.
gdb/ChangeLog:
* ada-lang.c (create_ada_exception_catchpoint): Enhance
the documentation of fields "except_string" and "condition".
* mi/mi-cmd-catch.c (mi_cmd_catch_assert): Reallocate
CONDITION on the heap before passing it to
create_ada_exception_catchpoint.
(mi_cmd_catch_exception): Likewise for EXCEPTION_NAME and
CONDITION.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_ex_cond: New testcase.
Tested on x86_64-linux. The "-break-list" test FAILs without
this patch.
* python/py-breakpoint.c (bppy_get_temporary): New function.
(bppy_init): New keyword: temporary. Parse it and set breakpoint
to temporary if True.
2013-11-07 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: Add temporary breakpoint tests.
2013-11-07 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Breakpoints In Python): Document temporary
option in breakpoint constructor, and add documentation to the
temporary attribute.
This patch is to add a test case to on the performance of GDB handling
load and unload of shared library.
In V4:
- Handle malloc and dlopen failure,
- Document test parameters.
In V3, there are some changes,
- Adapt to perf test framework changes.
- Measure load and unload separately.
In V2, there are some changes,
- A new proc gdb_produce_source to produce source files. I tried to
move all source file generation code out of solib.exp, but
compilation step still needs to know the generated file names. I
have to hard-code the file names in compilation step, which is not
good to me, so I give up on this moving.
- SOLIB_NUMBER -> SOLIB_COUNT
- New variable SOLIB_DLCLOSE_REVERSED_ORDER to control the order of
iterating a list of shared libs to dlclose them.
- New variable GDB_PERFORMANCE to enable these perf test cases.
- Remove dlsym call in solib.c.
- Update solib.py for the updated framework.
gdb/testsuite/
* lib/gdb.exp (gdb_produce_source): New procedure.
* gdb.perf/solib.c: New.
* gdb.perf/solib.exp: New.
* gdb.perf/solib.py: New.
This patch adds a basic framework to do performance testing for GDB.
perftest.py is about the test case, testresult.py is about test
results, and how are they saved. reporter.py is about how results
are reported (in what format). measure.py is about measuring the
execution of tests by a collection of measurements.
In V5:
- Simplify perftest.exp.
In V4:
- Rename MeasurementCPUTime to MeasurementCpuTime,
- Add 'pass' in empty method,
- Simplify string comparison in perftest.exp.
- Rename GDB_PERFORMANCE to GDB_PERFTEST_MODE and rename
GDB_PERFORMANCE_TIMEOUT to GDB_PERFTEST_TIMEOUT.
In V3, there are some changes,
- Add wall time measurement, cpu time measurement and vmsize
measurement.
- Rename SingleStatisticTestCase to TestCaseWithBasicMeasurements,
which measures cpu time, wall time, and memory (vmsize).
- GDB_PERFORMANCE=run|compile|both to control the mode of perf
testing.
- New GDB_PERFORMANCE_TIMEOUT to specify the timeout.
- Split proc prepare to proc compile and startup.
- Disable GC while doing measurements.
In V2, there are several changes to address Doug and Sanimir's
comments.
- Add copyright header and docstring in perftest/__init__.py
- Remove config.py.
- Fix docstring format.
- Rename classes "SingleVariable" to "SingleStatistic".
- Don't extend gdb.Function in class TestCase. Add a new method run
to run the test case so that we can pass parameters to test.
- Allow to customize whether to warm up and to append test log.
- Move time measurement into test harness. Add a new class
Measurement for a specific measurement and a new class Measure to
measure them for a given test case.
- A new class ResultFactory to create instances of TestResult.
- New file lib/perftest.exp, which is to do some preparations and
cleanups to simplify each *.exp file.
- Skip compilation step if GDB_PERFORMANCE_SKIP_COMPILE is set.
gdb/testsuite/
2013-11-06 Yao Qi <yao@codesourcery.com>
* lib/perftest.exp: New.
* gdb.perf/lib/perftest/__init__.py: New.
* gdb.perf/lib/perftest/measure.py: New.
* gdb.perf/lib/perftest/perftest.py: New.
* gdb.perf/lib/perftest/reporter.py: New.
* gdb.perf/lib/perftest/testresult.py: New.
We add a new dir gdb.perf in testsuite for all performance tests.
However, current 'make check' logic will either run dejagnu in
directory testsuite or iterate all gdb.* directories which has *.exp
files. Both of them will run tests in gdb.perf. We want to achieve:
1) typical 'make check' should not run performance tests. In each perf
test case, GDB_PERFTEST_MODE is checked. If it doesn't exist, return.
2) run perf tests easily. We add a new makefile target 'check-perf'.
gdb:
2013-11-06 Yao Qi <yao@codesourcery.com>
* Makefile.in (check-perf): New target.
gdb/testsuite:
2013-11-06 Yao Qi <yao@codesourcery.com>
* Makefile.in (check-perf): New target.
* configure.ac (AC_OUTPUT): Output Makefile in gdb.perf.
* configure: Re-generated.
* gdb.perf/Makefile.in: New.
This switches "make check" to fully parallel mode.
One primary issue facing full parallelization is the overhead of
"runtest". On my machine, if I "touch gdb.base/empty.exp", making a
new file, and then "time runtest.exp", it takes 0.08 seconds.
Multiply this by the 1008 (in my configuration) tests and you get ~80
seconds. This is the overhead that would theoretically be present if
all tests were run in parallel.
However, the problem isn't nearly as bad as this, for two reasons.
First, you must divide by the number of jobs, assuming perfect
parallelization -- reasonably true for small -j numbers, based on the
results I see.
Second, the current test suite parallelization approach bundles the
tests, largely by directory, but also splitting up gdb.base into two
halves.
I was curious to see how the current bundling played out in practice,
so I ran "make -j1 check RUNTEST='/bin/time runtest'". This invokes
the parallel mode (thus the bundling) and then shows the time taken by
each invocation of runtest.
Then, I ran "/bin/time make -j3 check". (See below about -j2.)
The time for the entire -j3 test run was the same as the time for
"gdb.base1". What this means is that gdb.base1 is currently the
time-limiting run, preventing further parallelization gains.
So, I reason, whatever overhead we see from full parallelization will
only be seen by "-j1" and "-j2".
I then tried a -j2 test run. This does take longer than a -j3 build,
meaning that the gdb.base1 job finishes and then proceeds to other
runtest invocations.
Finally I tried a -j2 test run with the appended patch.
This was 9% slower than the -j2 run without the patch.
I think that is a reasonable slowdown for what is probably a rare
case. I believe this patch will yield faster test results for all -j
values greater than 2. For -j3 on my machine, the test suite is a few
seconds faster; I didn't try any larger -j values.
For -j1, I went ahead and changed the Makefile so that, if no -j
option is given, then the "check-single" mode is used. You can still
use "make -j1 check" to get single-job parallel-mode, though of course
there's no good reason to do so.
This change is likely to speed up the plain "make check" scenario a
little as we will now bypass dg-extract-results.sh.
One drawback of this change is that "make -jN check" is now much more
verbose. I generally only look at the .sum and .log files, but
perhaps this will bother some.
Another interesting question is scalability of the result. The
slowest test, which limits the scalability, took 80.78 seconds. The
mean of the remaining tests is 1.08 seconds. (Note that this is just
a rough estimate, since there are still outliers.)
This means we can run 80.78 / 1.08 =~ 74 tests in the time available.
And, in this data set (slightly older than the above, but materially
the same) there were 948 tests. So, I think the current test suite
should scale ok up to about -j12.
We could improve this number if need be by breaking up the biggest
tests.
2013-11-04 Tom Tromey <tromey@redhat.com>
* Makefile.in (TEST_DIRS): Remove.
(TEST_TARGETS, check-parallel): Rewrite.
(check-gdb.%, BASE1_FILES, BASE2_FILES, check-gdb.base%)
(subdir_do, subdirs): Remove.
(do-check-parallel, check/%): New targets.
(clean): Remove outputs, temp, and cache directories.
(saw_dash_j): New variable.
(CHECK_TARGET): Use it.
(check): Depend on all, site.exp. Rewrite.
(check-single): Remove dependencies.
(slow_tests, all_tests, reordered_tests): New variables.
A couple of Fission tests rely on the current directory layout. This
assumption is not valid in parallel mode.
This patch fixes the problem by removing the relative directory from
the .S files and instead having the tests set debug-file-directory
before opening the main file.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.dwarf2/fission-base.S: Remove "gdb.dwarf/".
* gdb.dwarf2/fission-base.exp: Set debug-file-directory
before loading binfile.
* gdb.dwarf2/fission-loclists.S: Remove "gdb.dwarf/".
* gdb.dwarf2/fission-loclists.exp: Set debug-file-directory
before loading binfile.
A few tests run an inferior that execs some other program. The name
of this exec'd program is compiled in. These tests assume the current
test suite directory layout, but fail in parallel mode.
This patch fixes these tests by letting the .exp files pass in the
directory names at compile time.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.base/foll-exec.c (main): Use BASEDIR.
* gdb.base/foll-exec.exp: Define BASEDIR during compilation.
* gdb.base/foll-vfork.c (main): Use BASEDIR.
* gdb.base/foll-vfork.exp: Define BASEDIR during compilation.
* gdb.multi/bkpt-multi-exec.c (main): Use BASEDIR.
* gdb.multi/bkpt-multi-exec.exp: Define BASEDIR during compilation.
argv0-symlink.exp doesn't work properly if standard_output_file puts
files into a per-test subdirectory. That's because it assumes that
files appear in $subdir, which is no longer true.
This patch fixes the problem by computing the correct directory at
runtime.
Tested both with and without GDB_PARALLEL on x86-64 Fedora 18.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.base/argv0-symlink.exp: Compute executable's directory
dynamically.
This introduces a new relative_filename proc to gdb.exp and changes
some tests to use it. This helps make these tests parallel-safe.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.base/fullname.exp: Use standard_output_file,
relative_filename.
* gdb.base/hashline1.exp: Use standard_testfile,
standard_output_file, relative_filename, clean_restart.
* gdb.base/hashline2.exp: Use standard_testfile,
standard_output_file.
* gdb.base/hashline3.exp: Use standard_testfile,
standard_output_file, relative_filename.
* lib/gdb.exp (relative_filename): New proc.
This updates the fileio test to be parallel-safe.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.base/fileio.c (test_open, test_write, test_read)
(test_lseek, test_close, test_stat, test_fstat)
(test_isatty, test_system, test_rename, test_unlink):
Use OUTDIR define.
* gdb.base/fileio.exp: Define OUTDIR during compilation.
Use standard_output_file.
This fixes the "checkpoint" test to use the standard output directory.
This makes the test be parallel-safe.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.base/checkpoint.c (main): Use PI_TXT and COPY1_TXT
defines.
* gdb.base/checkpoint.exp: Define PI_TXT and COPY1_TXT during
compilation. Use prepare_for_testing, standard_output_file.
This makes more changes in gdb.base to make it parallel-safe. I think
the changes in this particular patch are relatively straightforward,
so I've grouped them all together.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.base/advance.exp: Use standard_testfile and
prepare_for_testing.
* gdb.base/bigcore.exp: Use standard_output_file. "cd" to
appropriate directory when local.
* gdb.base/dump.exp: Use standard_output_file. Update all
"dump" and "restore" filenames.
* gdb.base/interact.exp: Use standard_output_file.
* gdb.base/jit-so.exp: Don't download file when local.
* gdb.base/jit.exp (compile_jit_test): Don't download file
when local.
* gdb.base/list.exp: Use gdb_remote_download.
* gdb.base/maint.exp: Use standard_output_file.
* gdb.base/prelink.exp: Use standard_output_file.
* gdb.base/save-bp.exp: Use standard_output_file.
* gdb.base/sepdebug.exp: Use standard_testfile,
standard_output_file.
(test_different_dir): Don't declare objdir.
* gdb.base/solib-search.exp: Use standard_output_file.
* gdb.base/step-line.exp: Use gdb_remote_download.
* gdb.base/trace-commands.exp: Use standard_output_file.
This fixes gdb.trace to be parallel-safe.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.trace/mi-traceframe-changed.exp: Pass -DTFILE_DIR
to compilation. Use standard_output_file.
(test_tfind_tfile): Update.
* gdb.trace/tfile.c (write_basic_trace_file)
(write_error_trace_file): Use TFILE_DIR.
* gdb.trace/tfile.exp: Pass -DTFILE_DIR to compilation. Use
standard_output_file.
This fixes gdb.mi to be parallel-safe.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.mi/mi-cmd-param-changed.exp (test_command_param_changed):
Use "dwarf2 always-disassemble" for the "maint set" test.
* gdb.mi/mi-file-transfer.exp (test_file_transfer): Use
standard_output_file.
* gdb.mi/mi-logging.exp: Use standard_output_file.
This fixes the gdb.xml tests to be parallel-safe.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.xml/tdesc-arch.exp: Use standard_output_file. Make
downloads conditional on remote host.
(set_arch): Likewise.
* gdb.xml/tdesc-regs.exp: Use gdb_remote_download.
(load_description): Use standard_output_file.
This fixes the gdb.gdb tests to be parallel-safe, by ensuring that the
new "xgdb" file ends up in the standard output directory during the
tests.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.gdb/selftest.exp: Use standard_output_file.
* lib/selftest-support.exp (do_self_tests): Use
standard_output_file.
This fixes up gdb.stabs/weird.exp for parallel testing. This just
means using gdb_remote_download and standard_output_file, so that the
tests end up in the right place.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.stabs/weird.exp: Use gdb_remote_download and
standard_output_file.
This fixes some parallelization thinkos from a while ago. I'm not
sure how the problems ever slipped through. In addition to a thinko
fix in twice.exp, this also finishes fixing it up for parallelization.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.base/gcore-buffer-overflow.exp: Use
standard_output_file, not standard_testfile.
* gdb.base/twice.exp: Use standard_testfile, not
standard_output_file. Use gdb_remote_download.
Currently a proc in gdb.exp toggles the expect (and thus dejagnu)
logging. This is not a super idea, but it is there to avoid putting
some preprocessor output into the log.
In the right circumstances, this can result in the log file being
mysteriously truncated. I think this happens because it doesn't
necessarily write to the correct log file again.
The fix is to use "log_file -info" to save the previous log file.
2013-11-04 Tom Tromey <tromey@redhat.com>
* lib/gdb.exp (get_compiler_info): Use log_file -info and
restore from that.
Correct the patterns in the gdb_test_multiple invocation.
testsuite/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/s390-multiarch.exp (test_linux_v2): Add $gdb_prompt to
the patterns in gdb_test_multiple.
These references to ChangeLog-mi are stale.
testsuite/gdb.mi/ChangeLog-mi doesn't exist anymore, since:
...
commit 2dd627049d
Author: Andrew Cagney <cagney@redhat.com>
Date: Sat Jun 23 21:47:09 2001 +0000
Rename gdb.mi/ChangeLog-mi to gdb.mi/ChangeLog. Update everything.
...
commit 48efe7049b
Author: Andrew Cagney <cagney@redhat.com>
Date: Mon Jan 12 15:16:44 2004 +0000
Eliminate the old mi/tui specific ChangeLog files as in ...
Added Files:
mi/ChangeLog-1999-2003 testsuite/gdb.mi/ChangeLog-1999-2003
tui/ChangeLog-1998-2003
Removed Files:
mi/ChangeLog testsuite/gdb.mi/ChangeLog tui/ChangeLog
Tested with 'make check RUNTESTFLAGS="--directory=gdb.mi"' on x86_64 Fedora 17.
gdb/testsuite/
2013-10-29 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-console.c, gdb.mi/mi-stack.c: Remove local emacs
variable setting change-log-default-name to ChangeLog-mi.
https://sourceware.org/ml/gdb-patches/2013-08/msg00171.html
gdb/ChangeLog
* infcmd.c (default_print_one_register_info): Use val_print to
print all values even optimized out or unavailable ones. Don't
try to print a raw form of optimized out or unavailable values.
gdb/testsuite/ChangeLog
* gdb.trace/unavailable.exp (gdb_unavailable_registers_test):
Expect <unavailable> pattern.
This test exercises the commands 'add-symbol-file'
and 'remove-symbol-file'.
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
gdb/testsuite
* gdb.base/sym-file-lib.c: New file.
* gdb.base/sym-file-loader.c: New file.
* gdb.base/sym-file-loader.h: New file.
* gdb.base/sym-file-main.c: New file.
* gdb.base/sym-file.exp: New file.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
gdb/testsuite
* lib/gdb.exp (is_elf_target): New function.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
Some remote stubs do not have a proper exit() function implementation.
gdb.base/bang.exp was failing on those targets due to timeout. With
this patch bang.exp uses already defined library procedures to handle
this situation gracefully without breaking native targets.
Tested with x86_64 (unix, native-gdbserver) and with arc-*-elf32.
gdb/testsuite/ChangeLog:
2013-10-25 Anton Kolesov <Anton.Kolesov@synopsys.com> (tiny change)
* gdb.base/bang.exp: Use gdb_continue_to_end to properly support
remote stubs where exit() behaviour is unreliable.
With:
struct static_struct { static int aaa; };
struct static_struct sss;
int main () { return 0; }
We get:
(gdb) p sss
$1 = {static aaa = <optimized out>}
(gdb) p sss.aaa
field aaa is nonexistent or has been optimized out
Note that the "field aaa ..." message is an error being thrown.
GDB is graceful everywhere else when printing optimized out values.
IOW it usually prints an <optimized out> value and puts that in the
value history. I see no reason for here to be different, more so that
when the print the whole "containing" object (well, it's a static
field, so it's not really a container), we already print <optimized
out>.
After the patch:
(gdb) p sss
$1 = {static aaa = <optimized out>}
(gdb) p sss.aaa
$2 = <optimized out>
The value_entirely_optimized_out checks are there to preserve
behavior. Without those, if the static field is a struct/union, GDB
would go and print its fields one by one (and print <optimized out>
for each).
Tested on x86_64 Fedora 17.
gdb/
2013-10-25 Pedro Alves <palves@redhat.com>
* cp-valprint.c (cp_print_value_fields): No longer handle a NULL
static field value.
(cp_print_static_field): If the value is entirely optimized out,
print <optimized out> here.
* jv-valprint.c (java_print_value_fields): No longer handle a NULL
static field value.
* p-valprint.c (pascal_object_print_static_field): If the value is
entirely optimized out, print <optimized out> here.
* valops.c (do_search_struct_field)
(value_struct_elt_for_reference): No longer handle a NULL static
field value.
* value.c (value_static_field): Return an optimized out value
instead of NULL.
gdb/testsuite/
2013-10-25 Pedro Alves <palves@redhat.com>
* gdb.cp/m-static.exp: Adjust expected output of printing a
nonexistent or optimized out static field. Also test printing the
the "container" object.
* lib/gdb.exp (gdb_finish): Send a kill request to `gdbserver'
if in the persistent mode.
* gdb.trace/disconnected-tracing.exp: Reconnect before completion.
gdb/
* linux-tdep.c (linux_corefile_thread_callback): Propagate any
failure from register information collection.
gdb/testsuite/
* lib/gdb.exp (gdb_gcore_cmd): Also handle a "Target does not
support core file generation" reply.
PR gdb/15986
* gdb.base/run.c (main): gdb_get_line_number tag added for
commands.exp.
(factorial): Likewise.
* gdb.base/commands.exp (watchpoint_command_test): Use
gdb_get_line_number in order to determine the locations in run.c
where local_var is detected to go out of scope.
https://sourceware.org/ml/gdb-patches/2013-10/msg00477.html
gdb/ChangeLog
* breakpoint.c (update_watchpoint): If hardware watchpoints are
forced off, downgrade them to software watchpoints if possible,
and error out if not possible.
(watch_command_1): Move watchpoint type selection closer to
watchpoint creation, and extend the comments.
gdb/testsuite/ChangeLog
* gdb.base/watchpoints.exp: Add test for setting software
watchpoints of different types before starting the inferior.
I noticed something odd while doing "stepi" over a fork syscall:
...
(gdb) set disassemble-next-line on
...
(gdb) si
0x000000323d4ba7c2 131 pid = ARCH_FORK ();
0x000000323d4ba7a4 <__libc_fork+132>: 64 4c 8b 04 25 10 00 00 00 mov %fs:0x10,%r8
0x000000323d4ba7ad <__libc_fork+141>: 31 d2 xor %edx,%edx
0x000000323d4ba7af <__libc_fork+143>: 4d 8d 90 d0 02 00 00 lea 0x2d0(%r8),%r10
0x000000323d4ba7b6 <__libc_fork+150>: 31 f6 xor %esi,%esi
0x000000323d4ba7b8 <__libc_fork+152>: bf 11 00 20 01 mov $0x1200011,%edi
0x000000323d4ba7bd <__libc_fork+157>: b8 38 00 00 00 mov $0x38,%eax
=> 0x000000323d4ba7c2 <__libc_fork+162>: 0f 05 syscall
0x000000323d4ba7c4 <__libc_fork+164>: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
0x000000323d4ba7ca <__libc_fork+170>: 0f 87 2b 01 00 00 ja 0x323d4ba8fb <__libc_fork+475>
(gdb) si
0x000000323d4ba7c4 131 pid = ARCH_FORK ();
0x000000323d4ba7a4 <__libc_fork+132>: 64 4c 8b 04 25 10 00 00 00 mov %fs:0x10,%r8
0x000000323d4ba7ad <__libc_fork+141>: 31 d2 xor %edx,%edx
0x000000323d4ba7af <__libc_fork+143>: 4d 8d 90 d0 02 00 00 lea 0x2d0(%r8),%r10
0x000000323d4ba7b6 <__libc_fork+150>: 31 f6 xor %esi,%esi
0x000000323d4ba7b8 <__libc_fork+152>: bf 11 00 20 01 mov $0x1200011,%edi
0x000000323d4ba7bd <__libc_fork+157>: b8 38 00 00 00 mov $0x38,%eax
0x000000323d4ba7c2 <__libc_fork+162>: 0f 05 syscall
=> 0x000000323d4ba7c4 <__libc_fork+164>: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
0x000000323d4ba7ca <__libc_fork+170>: 0f 87 2b 01 00 00 ja 0x323d4ba8fb <__libc_fork+475>
(gdb) si
0x000000323d4ba7c4 131 pid = ARCH_FORK ();
0x000000323d4ba7a4 <__libc_fork+132>: 64 4c 8b 04 25 10 00 00 00 mov %fs:0x10,%r8
0x000000323d4ba7ad <__libc_fork+141>: 31 d2 xor %edx,%edx
0x000000323d4ba7af <__libc_fork+143>: 4d 8d 90 d0 02 00 00 lea 0x2d0(%r8),%r10
0x000000323d4ba7b6 <__libc_fork+150>: 31 f6 xor %esi,%esi
0x000000323d4ba7b8 <__libc_fork+152>: bf 11 00 20 01 mov $0x1200011,%edi
0x000000323d4ba7bd <__libc_fork+157>: b8 38 00 00 00 mov $0x38,%eax
0x000000323d4ba7c2 <__libc_fork+162>: 0f 05 syscall
=> 0x000000323d4ba7c4 <__libc_fork+164>: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
0x000000323d4ba7ca <__libc_fork+170>: 0f 87 2b 01 00 00 ja 0x323d4ba8fb <__libc_fork+475>
(gdb) si
0x000000323d4ba7ca 131 pid = ARCH_FORK ();
0x000000323d4ba7a4 <__libc_fork+132>: 64 4c 8b 04 25 10 00 00 00 mov %fs:0x10,%r8
0x000000323d4ba7ad <__libc_fork+141>: 31 d2 xor %edx,%edx
0x000000323d4ba7af <__libc_fork+143>: 4d 8d 90 d0 02 00 00 lea 0x2d0(%r8),%r10
0x000000323d4ba7b6 <__libc_fork+150>: 31 f6 xor %esi,%esi
0x000000323d4ba7b8 <__libc_fork+152>: bf 11 00 20 01 mov $0x1200011,%edi
0x000000323d4ba7bd <__libc_fork+157>: b8 38 00 00 00 mov $0x38,%eax
0x000000323d4ba7c2 <__libc_fork+162>: 0f 05 syscall
0x000000323d4ba7c4 <__libc_fork+164>: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
=> 0x000000323d4ba7ca <__libc_fork+170>: 0f 87 2b 01 00 00 ja 0x323d4ba8fb <__libc_fork+475>
Notice how the third "si" didn't actually make progress.
Turning on infrun and lin-lwp debug, we see:
(gdb)
infrun: clear_proceed_status_thread (process 5252)
infrun: proceed (addr=0xffffffffffffffff, signal=144, step=1)
infrun: resume (step=1, signal=0), trap_expected=0, current thread [process 5252] at 0x323d4ba7c4
LLR: Preparing to step process 5252, 0, inferior_ptid process 5252
RC: Not resuming sibling process 5252 (not stopped)
LLR: PTRACE_SINGLESTEP process 5252, 0 (resume event thread)
sigchld
infrun: wait_for_inferior ()
linux_nat_wait: [process -1], []
LLW: enter
LNW: waitpid(-1, ...) returned 5252, No child processes
LLW: waitpid 5252 received Child exited (stopped)
LLW: Candidate event Child exited (stopped) in process 5252.
SEL: Select single-step process 5252
LLW: exit
infrun: target_wait (-1, status) =
infrun: 5252 [process 5252],
infrun: status->kind = stopped, signal = SIGCHLD
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x323d4ba7c4
infrun: random signal 20
infrun: stepi/nexti
infrun: stop_stepping
So the inferior got a SIGCHLD (because the fork child exited while
we're doing 'si'), and since that signal is set to "nostop noprint
pass" (by default), it's considered a random signal, so it should not
cause a stop. But, it resulted in an immediate a stop_stepping call
anyway. So the single-step never really finished.
This is a regression caused by:
[[PATCH] Do not respawn signals, take 2.]
https://sourceware.org/ml/gdb-patches/2012-06/msg00702.html
Specifically, caused by this change (as mentioned in the "the lost
step issue first" part of that mail):
diff --git a/gdb/infrun.c b/gdb/infrun.c
index 53db335..3e8dbc8 100644
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -4363,10 +4363,8 @@ process_event_stop_test:
(leaving the inferior at the step-resume-breakpoint without
actually executing it). Either way continue until the
breakpoint is really hit. */
- keep_going (ecs);
- return;
}
-
+ else
/* Handle cases caused by hitting a breakpoint. */
{
That made GDB fall through to the
> /* In all-stop mode, if we're currently stepping but have stopped in
> some other thread, we need to switch back to the stepped thread. */
> if (!non_stop)
part. However, if we don't have a stepped thread to get back to,
we'll now also fall through to all the "stepping" tests. For line
stepping, that'll turn out okay, as we'll just end up realizing the
thread is still in the stepping range, and needs to be re-stepped.
However, for stepi/nexti, we'll reach:
if (ecs->event_thread->control.step_range_end == 1)
{
/* It is stepi or nexti. We always want to stop stepping after
one instruction. */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
return;
}
and stop, even though the thread actually made no progress. The fix
is to restore the keep_going call, but put it after the "switch back
to the stepped thread" code, and before the stepping tests.
Tested on x86_64 Fedora 17, native and gdbserver. New test included.
gdb/
2013-10-18 Pedro Alves <palves@redhat.com>
PR gdb/16062
* infrun.c (handle_inferior_event): Keep going if we got a random
signal we should not stop for, instead of falling through to the
step tests.
gdb/testsuite/
2013-10-18 Pedro Alves <palves@redhat.com>
PR gdb/16062
* gdb.threads/stepi-random-signal.c: New file.
* gdb.threads/stepi-random-signal.exp: New file.
This patch fixes PR gdb/15995.
The bug here is that gdb's printf command does not flush the output
stream. This makes a printf that is not newline-terminated interleave
incorrectly with other forms of output, such as that generated via a
call to an external program using "shell".
I note that the "output" command already does this flushing.
The fix is to call gdb_flush in printf_command.
Built and regtested on x86-64 Fedora 18.
New test case included.
PR gdb/15995:
* printcmd.c (printcmd): Call gdb_flush.
* gdb.base/printcmds.exp (test_printf): Test printf flushing.
gdb/
2013-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
Canonicalize directories for EXEC_FILENAME.
* exec.c (exec_file_attach): Use gdb_realpath_keepfile for
exec_filename.
* utils.c (gdb_realpath_keepfile): New function.
* utils.h (gdb_realpath_keepfile): New declaration.
gdb/testsuite/
2013-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
Canonicalize directories for EXEC_FILENAME.
* gdb.base/argv0-symlink.exp
(kept file symbolic link name for info inferiors): New.
(kept directory symbolic link name): Setup kfail.
(kept directory symbolic link name for info inferiors): New.
... in place of the CLI "catch ..." commands. The latter were used
because the GDB/MI equivalents were not available at the time.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_catch_ex.exp: Adjusts all "catch ..." tests to
use the appropriate GDB/MI command instead, and verify
the test output.
Consider the following example:
% gdb -q -batch -ex 'source nonexistant-file'
[nothing]
One would have at least expected the debugger to warn about
not finding the file, similar to the error shown when using
a more interactive mode. Eg:
(gdb) source nonexistant-file
nonexistant-file: No such file or directory.
Not raising an error appears to be intentional, presumably in order
to prevent this situation from stoping the execution of a GDB script.
But the lack of at least a warning makes it harder for a user to
diagnose any issue, if the file was expected to be there and readable.
This patch adds a warning in that case:
% gdb -q -batch -ex 'source nonexistant-file'
warning: nonexistant-file: No such file or directory.
gdb/ChangeLog:
* utils.h (perror_warning_with_name): Add declaration.
* utils.c (perror_warning_with_name): New function.
* cli/cli-cmds.c (source_script_with_search): Add call to
perror_warning_with_name if from_tty is nul.
gdb/testsuite/ChangeLog:
* gdb.base/source-nofile.gdb: New file.
* gdb.base/source.exp: Add two tests verifying the behavior when
the "source" command is given a non-existant filename.
* gdb.mi/mi-catch-load.c: Remove the include of "dlfcn.h".
[__WIN32__]: Include "windows.h" and define macro 'dlopen'
and 'dlclose'.
[!__WIN32__]: Include "dlfcn.h".
* gdb.mi/mi-catch-load.exp: Set up kfail.
target_read_memory & friends build on top of target_read (thus on top
of the target_xfer machinery), but turn all errors to EIO, an errno
value. I think we'd better convert all these to return a
target_xfer_error too, like target_xfer_partial in a previous patch.
The patch starts by doing that.
(The patch does not add a enum target_xfer_error value for '0'/no
error, and likewise does not change the return type of several of
these functions to enum target_xfer_error, because different functions
return '0' with different semantics.)
I audited the tree for memory_error calls, EIO checks, places where
GDB hardcodes 'errno = EIO', and also for strerror calls. What I
found is that nowadays there's really no need to handle random errno
values, other than the EIOs gdb itself hardcodes. No doubt errno
values would appear in common code back in the day when
target_xfer_memory was the main interface to access memory, but
nowadays, any errno value that deprecated interface could return is
just absorved by default_xfer_partial:
else if (xfered == 0 && errno == 0)
/* "deprecated_xfer_memory" uses 0, cross checked against
ERRNO as one indication of an error. */
return 0;
else
return -1;
There are two places in the code that check for EIO and print "out of
bounds", and defer to strerror for other errors. That's
c-lang.c:c_get_string, and valprint.c.:val_print_string. AFAICT, the
strerror branch can never be reached nowadays, as the only error
possible to get at those points is EIO, given that it's GDB itself
that set that errno value (in target_read_memory, etc.).
breakpoint.c:insert_bp_location always prints the error val as if an
errno, returned by target_insert_breakpoint, with strerr. Now the
error here is either always EIO for mem-break.c targets (again
hardcoded by the target_read_memory/target_write_memory functions), so
this always prints "Input/output error" or similar (depending on
host), or, for remote targets (and probably others), this gem:
Error accessing memory address 0x80200400: Unknown error -1.
This patch makes these 3 places print the exact same error
memory_error prints. This changes output, but I think this is better,
for making memory error output consistent with other commands, and, it
means we have a central place to tweak for memory errors.
E.g., this changes:
Cannot insert breakpoint 1.
Error accessing memory address 0x5fc660: Input/output error.
to:
Cannot insert breakpoint 1.
Cannot access memory at address 0x5fc660
Which I find pretty much acceptable.
Surprisingly, only py-prettyprint.exp had a regression, for needing an
adjustment. I also grepped the testsuite for the old errors, and
found no other hits.
Now that errno values aren't used anywhere in any of these memory
access related routines, I made memory_error itself take a
target_xfer_error instead of an errno. The new
target_xfer_memory_error function added recently is no longer
necessary, and is thus removed.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-10-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Use memory_error_message to
build the memory error string.
* c-lang.c: Include "gdbcore.h".
(c_get_string): Use memory_error to throw error.
(target_xfer_memory_error): Delete.
(memory_error_message): New, factored out from
target_xfer_memory_error.
(memory_error): Change parameter type to target_xfer_error.
Rewrite.
(read_memory): Use memory_error instead of
target_xfer_memory_error.
* gdbcore.h: Include "target.h".
(memory_error): Change parameter type to target_xfer_error.
(memory_error_message): Declare function.
* target.c (target_read_memory, target_read_stack)
(target_write_memory, target_write_raw_memory): Return
TARGET_XFER_E_IO on error. Adjust comments.
(get_target_memory): Pass TARGET_XFER_E_IO to memory_error,
instead of EIO.
* target.h (target_read, target_insert_breakpoint)
(target_remove_breakpoint): Adjust comments.
* valprint.c (partial_memory_read): Rename parameter, and adjust
comment.
(val_print_string): Use memory_error_message to build the memory
error string.
gdb/testsuite/
2013-10-09 Pedro Alves <palves@redhat.com>
* gdb.python/py-prettyprint.exp (run_lang_tests): Adjust expected
output.
catch-syscall.exp has a series of duplicated output in gdb.sum. This
patch makes sure all test names are unique, using with_test_prefix.
Tested on x86_64 Fedora 17.
gdb/testsuite/
2013-10-09 Pedro Alves <palves@redhat.com>
* gdb.base/catch-syscall.exp (test_catch_syscall_without_args)
(test_catch_syscall_with_args, test_catch_syscall_with_many_args)
(test_catch_syscall_with_wrong_args)
(test_catch_syscall_restarting_inferior)
(test_catch_syscall_fail_nodatadir)
(test_catch_syscall_without_args_noxml)
(test_catch_syscall_with_args_noxml)
(test_catch_syscall_with_wrong_args_noxml): Use with_test_prefix.
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
will hold the signal number when the inferior terminates due to the
uncaught signal.
I've made modifications on infrun.c:handle_inferior_event such that
$_exitcode gets cleared when the inferior signalled, and vice-versa.
This assumption was made because the variables are mutually
exclusive, i.e., when the inferior terminates because of an uncaught
signal it is not possible for it to return. I have also made modifications
such that when a corefile is loaded, $_exitsignal gets set to the uncaught
signal that "killed" the inferior, and $_exitcode is cleared.
The patch also adds a NEWS entry, documentation bits, and a testcase. The
documentation entry explains how to use $_exitsignal and $_exitcode in a
GDB script, by making use of the new $_isvoid convenience function.
gdb/
2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS: Mention new convenience variable $_exitsignal.
* corelow.c (core_open): Reset exit convenience variables. Set
$_exitsignal to the uncaught signal which generated the corefile.
* infrun.c (handle_inferior_event): Reset exit convenience
variables. Set $_exitsignal for TARGET_WAITKIND_SIGNALLED.
(clear_exit_convenience_vars): New function.
* inferior.h (clear_exit_convenience_vars): New prototype.
gdb/testsuite/
2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/corefile.exp: Test whether $_exitsignal is set and
$_exitcode is void when opening a corefile.
* gdb.base/exitsignal.exp: New file.
* gdb.base/segv.c: Likewise.
* gdb.base/normal.c: Likewise.
gdb/doc/
2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Convenience Variables): Document $_exitsignal.
Update entry for $_exitcode.
gdb/ChangeLog:
* mi/mi-main.c (run_one_inferior): Add function description.
Make ARG a pointer to an integer whose value determines whether
we should "run" or "start" the program.
(mi_cmd_exec_run): Add handling of the "--start" option.
Reject all other command-line options.
* NEWS: Add entry for "-exec-run"'s new "--start" option.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Program Execution): Document "-exec-run"'s
new "--start" option.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-start.c, gdb.mi/mi-start.exp: New files.
Currently, in some scenarios, GDB prints <optimized out> when printing
outer frame registers. An <optimized out> register is a confusing
concept. What this really means is that the register is
call-clobbered, or IOW, not saved by the callee. This patch makes GDB
say that instead.
Before patch:
(gdb) p/x $rax $1 = <optimized out>
(gdb) info registers rax
rax <optimized out>
After patch:
(gdb) p/x $rax
$1 = <not saved>
(gdb) info registers rax
rax <not saved>
However, if for some reason the debug info describes a variable as
being in such a register (**), we still want to print <optimized out>
when printing the variable. IOW, <not saved> is reserved for
inspecting registers at the machine level. The patch uses
lval_register+optimized_out to encode the not saved registers, and
makes it so that optimized out variables always end up in
!lval_register values.
** See <https://sourceware.org/ml/gdb-patches/2012-08/msg00787.html>.
Current/recent enough GCC doesn't mark variables/arguments as being in
call-clobbered registers in the ranges corresponding to function
calls, while older GCCs did. Newer GCCs will just not say where the
variable is, so GDB will end up realizing the variable is optimized
out.
frame_unwind_got_optimized creates not_lval optimized out registers,
so by default, in most cases, we'll see <optimized out>.
value_of_register is the function eval.c uses for evaluating
OP_REGISTER (again, $pc, etc.), and related bits. It isn't used for
anything else. This function makes sure to return lval_register
values. The patch makes "info registers" and the MI equivalent use it
too. I think it just makes a lot of sense, as this makes it so that
when printing machine registers ($pc, etc.), we go through a central
function.
We're likely to need a different encoding at some point, if/when we
support partially saved registers. Even then, I think
value_of_register will still be the spot to tag the intention to print
machine register values differently.
value_from_register however may also return optimized out
lval_register values, so at a couple places where we're computing a
variable's location from a dwarf expression, we convert the resulting
value away from lval_register to a regular optimized out value.
Tested on x86_64 Fedora 17
gdb/
2013-10-02 Pedro Alves <palves@redhat.com>
* cp-valprint.c (cp_print_value_fields): Adjust calls to
val_print_optimized_out.
* jv-valprint.c (java_print_value_fields): Likewise.
* p-valprint.c (pascal_object_print_value_fields): Likewise.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full)
<DWARF_VALUE_REGISTER>: If the register was not saved, return a
new optimized out value.
* findvar.c (address_from_register): Likewise.
* frame.c (put_frame_register): Tweak error string to say the
register was not saved, rather than optimized out.
* infcmd.c (default_print_one_register_info): Adjust call to
val_print_optimized_out. Use value_of_register instead of
get_frame_register_value.
* mi/mi-main.c (output_register): Use value_of_register instead of
get_frame_register_value.
* valprint.c (valprint_check_validity): Likewise.
(val_print_optimized_out): New value parameter. If the value is
lval_register, print <not saved> instead.
(value_check_printable, val_print_scalar_formatted): Adjust calls
to val_print_optimized_out.
* valprint.h (val_print_optimized_out): New value parameter.
* value.c (struct value) <optimized_out>: Extend comment.
(error_value_optimized_out): New function.
(require_not_optimized_out): Use it. Use a different string for
lval_register values.
* value.h (error_value_optimized_out): New declaration.
* NEWS: Mention <not saved>.
gdb/testsuite/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-reg-undefined.exp <pattern_rax_rbx_rcx_print,
pattern_rax_rbx_rcx_info>: Set to "<not saved>".
* gdb.mi/mi-reg-undefined.exp (opt_out_pattern): Delete.
(not_saved_pattern): New.
Replace use of the former with the latter.
gdb/doc/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Registers): Expand description of saved registers
in frames. Explain <not saved>.
Running catch-syscall.exp against a gdbserver that actually supports
it, we get:
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit at catch syscall with unused syscall (mlock) (the program exited)
FAIL: gdb.base/catch-syscall.exp: continue until exit (the program exited)
The fail pattern is:
Catchpoint 2 (call to syscall exit_group), 0x000000323d4baa29 in _exit () from /lib64/libc.so.6
(gdb) PASS: gdb.base/catch-syscall.exp: program has called exit_group
delete breakpoints
Delete all breakpoints? (y or n) y
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) break exit
Breakpoint 3 at 0x323d438bf0
(gdb) continue
Continuing.
[Inferior 1 (process 21081) exited normally]
That "break exit" + "continue" comes from:
> # gdb_continue_to_end:
> # The case where the target uses stubs has to be handled specially. If a
> # stub is used, we set a breakpoint at exit because we cannot rely on
> # exit() behavior of a remote target.
> #
The native-gdbserver.exp board, used to test against gdbserver in
"target remote" mode, triggers that case ($use_gdb_stub is true). So
gdb_continue_to_end doesn't work for catch-syscall.exp as here we
catch the exit_group and continue from that, expecting to see a real
program exit. I was about to post a patch that changes
catch-syscall.exp to call a new function that just always does what
gdb_continue_to_end does in the !$use_gdb_stub case. But, since
GDBserver doesn't really need this, in the end I thought it better to
teach the testsuite that there are stubs that know how to report
program exits, by adding a new "exit_is_reliable" board variable that
then gdb_continue_to_end checks.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/testsuite/
2013-10-02 Pedro Alves <palves@redhat.com>
* README (Board Settings): Document "exit_is_reliable".
* lib/gdb.exp (gdb_continue_to_end): Check whether the board says
running to exit reliably reports program exits.
* boards/native-gdbserver.exp: Set exit_is_reliable in the board
info.
* boards/native-stdio-gdbserver.exp: Likewise.
2013-09-25 Andreas Arnez <arnez@linux.vnet.ibm.com>
PR shlibs/8882
* solib-svr4.c (svr4_read_so_list): Skip the vDSO when reading
link map entries.
testsuite/ChangeLog:
2013-09-25 Andreas Arnez <arnez@linux.vnet.ibm.com>
PR shlibs/8882
* gdb.base/corefile.exp: Add a check to assure warning-free
core-file load.
gdb/
2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (open_and_init_dwp_file): Try open_dwp_file also with
objfile->original_name.
gdb/testsuite/
2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.dwarf2/dwp-symlink.c: New file.
* gdb.dwarf2/dwp-symlink.exp: New file.
https://sourceware.org/ml/gdb-patches/2013-08/msg00170.html
gdb/ChangeLog
* infcmd.c (default_print_one_register_info): Add detection of
optimized out values.
(default_print_registers_info): Switch to using
get_frame_register_value.
gdb/testsuite/ChangeLog
* gdb.dwarf2/dw2-reg-undefined.exp: Change pattern for info
register to "<optimized out>", and also print the registers.
Skip the test on Cygwin too.
2013-09-18 Pedro Alves <palves@redhat.com>
PR server/15967
* gdb.server/wrapper.exp: Also return unsupported for Cygwin, and
change text.
PR gdb/11568 is about thread-specific breakpoints being left behind
when the corresponding thread exits.
Currently:
(gdb) b start thread 2
Breakpoint 3 at 0x400614: file thread-specific-bp.c, line 23.
(gdb) b end
Breakpoint 4 at 0x40061f: file thread-specific-bp.c, line 29.
(gdb) c
Continuing.
[Thread 0x7ffff7fcb700 (LWP 14925) exited]
[Switching to Thread 0x7ffff7fcc740 (LWP 14921)]
Breakpoint 4, end () at thread-specific-bp.c:29
29 }
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fcc740 (LWP 14921) "thread-specific" end () at thread-specific-bp.c:29
(gdb) info breakpoints
Num Type Disp Enb Address What
2 breakpoint keep y 0x0000000000400614 in start at thread-specific-bp.c:23
breakpoint already hit 1 time
3 breakpoint keep y 0x0000000000400614 in start at thread-specific-bp.c:23 thread 2
stop only in thread 2
4 breakpoint keep y 0x000000000040061f in end at thread-specific-bp.c:29
breakpoint already hit 1 time
Note that the thread-specific breakpoint 3 stayed around, even though
thread 2 is gone.
There's no way that breakpoint can trigger again (*), so the PR argues
that the breakpoint should just be removed, like local watchpoints.
I'm ambivalent on this -- it could be reasonable to disable the
breakpoint (kind of like breakpoint in shared library code when the
DSO is unloaded), so the user could still use it as visual template
for creating other breakpoints (copy/paste command lists, etc.), or we
could have a way to change to which thread a breakpoint applies. But,
several people pushed this direction, and I don't plan on arguing...
(*) - actually, there is ... thread numbers are reset on "run", so
the user could do "break foo thread 2", "run", and expect the
breakpoint to hit again on the second thread. But given gdb's thread
numbering can't really be stable, that'd only work sufficiently well
for thread 1, so we'd better call it unsupported.
So with the patch, whenever a thread is deleted from GDB's list, GDB
goes through the thread-specific breakpoints and deletes corresponding
breakpoints. Since this is user-visible, GDB prints out:
Thread-specific breakpoint 3 deleted - thread 2 is gone.
And of course, we end up with:
(gdb) info breakpoints
Num Type Disp Enb Address What
2 breakpoint keep y 0x0000000000400614 in start at thread-specific-bp.c:23
breakpoint already hit 1 time
4 breakpoint keep y 0x000000000040061f in end at thread-specific-bp.c:29
breakpoint already hit 1 time
2013-09-17 Muhammad Waqas <mwaqas@codesourcery.com>
Pedro Alves <palves@redhat.com>
PR gdb/11568
* breakpoint.c (remove_threaded_breakpoints): New function.
(_initialize_breakpoint): Attach remove_threaded_breakpoints
as thread_exit observer.
2013-09-17 Muhammad Waqas <mwaqas@codesourccery.com>
Jan Kratochvil <jan.kartochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR gdb/11568
* gdb.thread/thread-specific-bp.c: New file.
* gdb.thread/thread-specific-bp.exp: New file.
function. It adds a check for $_isvoid during the test of "show convenience"
output.
gdb/testsuite/
2013-09-17 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/defaults.exp (<show_conv_list>): Add check for $_isvoid
convenience function.
"info threads" changes the default source for "break" and "list", to
whatever the location of the first/bottom thread in the thread list
is...
(gdb) b start
(gdb) c
...
(gdb) list
*lists "start"*
(gdb) b 23
Breakpoint 3 at 0x400614: file test.c, line 23.
(gdb) info threads
Id Target Id Frame
* 2 Thread 0x7ffff7fcb700 (LWP 1760) "test" start (arg=0x0) at test.c:23
1 Thread 0x7ffff7fcc740 (LWP 1748) "test" 0x000000323dc08e60 in pthread_join (threadid=140737353922304, thread_return=0x0) at pthread_join.c:93
(gdb) b 23
Breakpoint 4 at 0x323dc08d90: file pthread_join.c, line 23.
^^^^^^^^^^^^^^^
(gdb) list
93 lll_wait_tid (pd->tid);
94
95
96 /* Restore cancellation mode. */
97 CANCEL_RESET (oldtype);
98
99 /* Remove the handler. */
100 pthread_cleanup_pop (0);
101
102
The issue is that print_stack_frame always sets the current sal to the
frame's sal. print_frame_info (which print_stack_frame calls to do
most of the work) also sets the last displayed sal, but only if
print_what isn't LOCATION. Now the call in question, from within
thread.c:print_thread_info, does pass in LOCATION as print_what, but
print_stack_frame doesn't have the same check print_frame_info has.
We could consider adding it, but setting these globals depending on
print_what isn't very clean, IMO. What we have is two logically
distinct operations mixed in the same function(s):
#1 - print frame, in the format specified by {print_what,
print_level and print_args}.
#2 - We're displaying a frame to the user, and I want the default
sal to point here, because the program stopped here, or the user
did some context-changing command (up, down, etc.).
So I added a new parameter to print_stack_frame & friends for point
#2, and went through all calls in the tree adjusting as necessary.
Tested on x86_64 Fedora 17.
gdb/
2013-09-17 Pedro Alves <palves@redhat.com>
PR gdb/15911
* ada-tasks.c (task_command_1): Adjust call to print_stack_frame.
* bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd):
* corelow.c (core_open):
* frame.h (print_stack_frame, print_frame_info): New
'set_current_sal' parameter.
* infcmd.c (finish_command, kill_command): Adjust call to
print_stack_frame.
* inferior.c (inferior_command): Likewise.
* infrun.c (normal_stop): Likewise.
* linux-fork.c (linux_fork_context): Likewise.
* record-full.c (record_full_goto_entry, record_full_restore):
Likewise.
* remote-mips.c (common_open): Likewise.
* stack.c (print_stack_frame): New 'set_current_sal' parameter.
Use it.
(print_frame_info): New 'set_current_sal' parameter. Set the last
displayed sal depending on the new paremeter instead of looking at
print_what.
(backtrace_command_1, select_and_print_frame, frame_command)
(current_frame_command, up_command, down_command): Adjust call to
print_stack_frame.
* thread.c (print_thread_info, restore_selected_frame)
(do_captured_thread_select): Adjust call to print_stack_frame.
* tracepoint.c (tfind_1): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
(mi_cmd_stack_info_frame): Likewise.
* mi/mi-interp.c (mi_on_normal_stop): Likewise.
* mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise.
gdb/testsuite/
* gdb.threads/info-threads-cur-sal-2.c: New file.
* gdb.threads/info-threads-cur-sal.c: New file.
* gdb.threads/info-threads-cur-sal.exp: New file.
* gdb.base/catch-load.c: Remove the include of "dlfcn.h".
[__WIN32__]: Include "windows.h" and define macro dlopen
and dlclose.
[!__WIN32__]: Include "dlfcn.h".
* gdb.base/catch-load.exp (one_catch_load_test): Match
directory separator.
<https://sourceware.org/ml/gdb-patches/2013-09/msg00301.html>
<https://sourceware.org/ml/gdb-patches/2013-09/msg00383.html>
This patch adds a new convenience function called $_isvoid, whose
only purpose is to check whether an expression is void or not.
This became necessary because the new convenience variable
$_exitsignal (not yet approved) has a mutual exclusive behavior
with $_exitcode, i.e., when one is "defined" (i.e., non-void),
the other is cleared (i.e., becomes void). Doug wanted a way to
identify which variable to use, and checking for voidness is the
obvious solution.
It is worth mentioning that my first attempt, after a conversation with
Doug, was to actually implement a new $_isdefined() convenience
function. I would do that (for convenience variables) by calling
lookup_only_internalvar. However, I found a few problems:
- Whenever I called $_isdefined ($variable), $variable became defined
(with a void value), and $_isdefined always returned true.
- Then, I tried to implement $_isdefined ("variable"), and do the "$" +
"variable" inside GDB, thus making it impossible for GDB to create the
convenience variable. However, it was hard to extract the string
without having to mess with values and their idiossincrasies.
Therefore, I decided to abandon this attempt (specially because I
didn't want to spend too much time struggling with it).
Anyway, after talking to Doug again we decided that it would be easier
to implement $_isvoid, and this will probably help in cases like
<http://stackoverflow.com/questions/3744554/testing-if-a-gdb-convenience-variable-is-defined>.
I wrote a NEWS entry for it, and some new lines on the documentation.
gdb/
2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS: Mention new convenience function $_isvoid.
* value.c (isvoid_internal_fn): New function.
(_initialize_values): Add new convenience function $_isvoid.
gdb/doc/
2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Convenience Functions): Mention new convenience
function $_isvoid.
gdb/testsuite/
2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/gdbvars.c (foo_void): New function.
(foo_int): Likewise.
* gdb.base/gdbvars.exp (test_convenience_functions): New
function. Call it.
gdb/doc/
2013-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (MiniDebugInfo): Prepare file debug and use it to create
mini_debuginfo. Strip binary before adding mini_debuginfo to it.
gdb/testsuite/
2013-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/gnu-debugdata.exp (objcopy 1): Move it lower and use only
debug part of the binary.
New regexpr now correctly deals with trailing canonical pathname.
Before only the following output was matched:
(gdb) cd
Working directory /users/foo
In addition it now matches an optional trailing canonical pathname:
(gdb) cd
Working directory /users/foo
(canonically /nfs/users/foo).
Triggered by `realpath .` != `pwd`
2013-09-10 Sanimir Agovic <sanimir.agovic@intel.com>
testsuite/
* gdb.base/default.exp: Adjust regexpr for 'cd' to match optional
canonical pathname.
(queue_and_load_dwo_tu): New function.
(lookup_dwo_signatured_type): Set per_cu.tu_read.
(maybe_queue_comp_unit): Rename this_cu argument to dependent_cu.
Make dependent_cu optional.
(dw2_do_instantiate_symtab): If we just loaded a CU from a DWO,
and an older .gdb_index is in use, queue and load all its TUs too.
testsuite/
* gdb.base/enumval.c (ZERO): New enum value.
(main): Use it
* gdb.base/enumval.exp: Test ability to print ZERO.
Pedro Alves <palves@redhat.com>
* symfile.c (add_symbol_file_command): Error out on unknown
option. Handle EXPECTING_SEC_ADDR/EXPECTING_SEC_NAME before '-'
options and collapse into single conditional branch.
2013-09-13 Muhammad Bilal <mbilal@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.base/relocate.exp: Check that invalid options are
rejected.
* python/py-framefilter.c (py_print_frame): Remove usage of
PyString_AsString. Use python_string_to_host_string instead.
Refactor function to work with a string as a new allocation
instead of a pointer.
(py_print_frame): Ditto.
* python/lib/gdb/frames.py (return_list): Cain iterators together
instead of adding them as a list.
(_sort_list): Call return_list, and remove duplicate code.
(execute_frame_filters): Convert iterator to a list with list().
* python/lib/gdb/command/frame_filters.py
(SetFrameFilterPriority._set_filter_priority): Convert priority
attribute to an integer.
* python/lib/gdb/FrameIterator.py (FrameIterator.next): Define
wrapper function __next__.
* python/lib/gdb/FrameDecorator.py: If basestring not defined,
define as "str".
2013-08-29 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-framefilter.py (FrameFilter.filter): Check
itertools for imap attribute. Otherwise use map().
(ElidingIterator): Define wrapper function __next__.
* gdb.python/py-framefilter-mi.exp: Do not use execfile,
use exec (open (read ())) instead.
* gdb.python/py-framefilter.exp: Ditto.
* gdb.python/py-arch.exp: Update print based test to Python 3.x
compliance.
* gdb.python/py-frame.exp: Ditto.
* gdb.python/py-type.exp: Ditto.
This is the patch to add new option '--skip-unavailable' to MI
commands '-stack-list-{locals, arguments, variables}'. This patch
extends list_args_or_locals to add a new parameter 'skip_unavailable',
and don't list locals or arguments if values are unavailable and
'skip_unavailable' is true.
This is inspecting a trace frame (tfind mode), where only a few
locals have been collected.
-stack-list-locals, no switch vs new switch:
-stack-list-locals --simple-values
^done,locals=[{name="array",type="unsigned char [2]"},{name="i",type="int",value="<unavailable>"}]
-stack-list-locals --skip-unavailable --simple-values
^done,locals=[{name="array",type="unsigned char [2]"}]
-stack-list-arguments, no switch vs new switch:
-stack-list-arguments --simple-values
^done,stack-args=[frame={level="0",args=[{name="j",type="int",value="4"},{name="s",type="char *",value="<unavailable>"}]},frame={level="1",args=[]}]
-stack-list-arguments --skip-unavailable --simple-values
^done,stack-args=[frame={level="0",args=[{name="j",type="int",value="4"}]},frame={level="1",args=[]}]
-stack-list-variables, no switch vs new switch:
-stack-list-variables --simple-values
^done,variables=[{name="j",arg="1",type="int",value="4"},{name="s",arg="1",type="char *",value="<unavailable>"},{name="array",type="unsigned char [2]"},{name="i",type="int",value="<unavailable>"}]
-stack-list-variables --skip-unavailable --simple-values
^done,variables=[{name="j",arg="1",type="int",value="4"},{name="array",type="unsigned char [2]"}]
tests are added to test these new options.
gdb:
2013-08-27 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* mi/mi-cmd-stack.c (list_args_or_locals): Adjust prototype.
(parse_no_frames_option): Remove.
(mi_cmd_stack_list_locals): Handle --skip-unavailable.
(mi_cmd_stack_list_args): Adjust.
(mi_cmd_stack_list_variables): Handle --skip-unavailable.
(list_arg_or_local): Add new parameter 'skip_unavailable'. Return
early if SKIP_UNAVAILABLE is true and ARG->val is unavailable.
Caller update.
(list_args_or_locals): New parameter 'skip_unavailable'.
Handle it.
* valprint.c (scalar_type_p): Rename to ...
(val_print_scalar_type_p): ... this. Make extern.
(val_print, value_check_printable): Adjust.
* valprint.h (val_print_scalar_type_p): Declare.
* value.c (value_entirely_unavailable): New function.
* value.h (value_entirely_unavailable): Declare.
* NEWS: Mention the new option "--skip-unavailable" to MI
commands '-stack-list-locals', '-stack-list-arguments' and
'-stack-list-variables'.
gdb/doc:
2013-08-27 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* gdb.texinfo (GDB/MI Stack Manipulation) <-stack-list-locals>:
Document new --skip-unavailable option.
<-stack-list-variables>: Document new --skip-unavailable option.
gdb/testsuite:
2013-08-27 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.exp: Test unavailable entry value is
not shown when option '--skip-unavailable' is specified.
* gdb.trace/mi-trace-unavailable.exp (test_trace_unavailable):
Add tests for new option '--skip-unavailable'.
* gdb.trace/entry-values.c (end): New
(main): Call end.
* gdb.trace/entry-values.exp: Load trace-support.exp. Set
tracepoint and collect data. Test entry value is unavailable.
PR gdb/15501
* breakpoint.c (enable_command, disable_command): Iterate over
all specified breakpoint locations.
2013-07-12 Muhammad Waqas <mwaqas@codesourccery.com>
PR gdb/15501
* gdb.base/ena-dis-br.exp: Add test to verify
enable/disable commands work correctly with
multiple arguments that include multiple locations.
This time, it passes all the tests and comes with a nearly complete
XML file (plus a script that can nearly regenerate the XML file).
(I elected to leave out __ARM_NR_cmpxchg, since it has dire warnings
to the effect that the only pieces of code that should be aware of it
are the implementation and the __kuser_cmpxchg code in entry-armv.S.)
gdb/
2013-08-14 Samuel Bronson <naesten@gmail.com>
ARM Linux support for `catch syscall'.
* syscalls/arm-linux.py: New file.
* syscalls/arm-linux.xml: Likewise.
* arm-linux-tdep.c (arm_linux_get_syscall_number): New function.
(arm_linux_init_abi): Register the new function and syscall xml file.
* data-directory/Makefile.in: Install the new syscall xml file.
* NEWS: Brag about this.
gdb/testsuite/
2013-08-14 Samuel Bronson <naesten@gmail.com>
ARM Linux support for `catch syscall'.
* gdb.base/catch-syscall.exp: Test this on ARM now.
(fill_all_syscalls_numbers): ARM has close/chroot on 6/61, too.
This fixes dwz.exp on 32-bit targets. It does so by introducing a new
"default" setting for the address size in the DWARF assembler.
Built and regtested on x86-64 Fedora 18.
I also ran the gdb.dwarf2 tests on an x86 machine (gcc45).
* lib/dwarf.exp (cu, tu): Handle addr_size of "default". Change
default addr_size.
* lib/gdb.exp (is_64_target): New gdb_caching_proc.
I noticed that skip_btrace_tests is a classic "caching proc" that I
missed when I added gdb_caching_proc. This patch converts it.
Built and regtested on x86-64 Fedora 18.
* lib/gdb.exp (skip_btrace_tests): Use gdb_caching_proc and
standard_temp_file.
This fixes parts of gdb.arch to be parallel-safe.
I only changed the bits I could test on this machine.
I don't have access to many of the machines needed to fully switch
gdb.arch; but I am happy to provide advice to others attempting this.
Or, I can send an untested patch to convert it all.
Tested on x86-64 Fedora 18.
* gdb.arch/amd64-byte.exp: Use standard_testfile,
clean_restart.
* gdb.arch/amd64-disp-step.exp: Use standard_testfile.
* gdb.arch/amd64-dword.exp: Use standard_testfile,
clean_restart.
* gdb.arch/amd64-entry-value-param.exp: Use standard_testfile.
* gdb.arch/amd64-entry-value.exp: Use standard_testfile.
* gdb.arch/amd64-prologue-xmm.exp: Use standard_testfile.
* gdb.arch/amd64-word.exp: Use standard_testfile,
clean_restart.
* gdb.arch/i386-avx.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-byte.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-disp-step.exp: Use standard_testfile.
* gdb.arch/i386-dr3-watch.exp: Use standard_testfile.
* gdb.arch/i386-permbkpt.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-signal.exp: Use standard_testfile.
* gdb.arch/i386-size-overlap.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-sse.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-unwind.exp: Use standard_testfile.
* gdb.arch/i386-word.exp: Use standard_testfile, clean_restart.
This fixes gdb.python to be parallel-safe, mostly by changing it to
use gdb_remote_download.
Tested on x86-64 Fedora 18.
* gdb.python/py-error.exp: Use gdb_remote_download.
* gdb.python/py-mi.exp: Use gdb_remote_download.
* gdb.python/py-objfile-script.exp: Use standard_output_file.
* gdb.python/py-prettyprint.exp: Use gdb_remote_download.
(run_lang_tests): Likewise.
* gdb.python/py-section-script.c: Use SCRIPT_FILE rather than
filename.
* gdb.python/py-section-script.exp: Set SCRIPT_FILE when
compiling. Use gdb_remote_download. Update some tests.
* gdb.python/py-strfns.exp (test_strfns_core_file): Use
standard_output_file.
* gdb.python/py-typeprint.exp: Use gdb_remote_download.
* gdb.python/py-frame-args.exp: Use gdb_remote_download.
* gdb.python/py-framefilter-mi.exp: Use gdb_remote_download.
* gdb.python/py-framefilter.exp: Use gdb_remote_download,
standard_output_file.
In an earlier patch I forgot to change the caching proc in cell.exp to
use standard_temp_file. This fixes the oversight.
Tested on x86-64 Fedora 18.
* lib/cell.exp (skip_cell_tests): Use standard_temp_file.
This finishes making gdb.dwarf2 parallel-safe.
To do this, this patch introduces a new gdb_remote_download proc, that
works somewhat differently in the one specific case where it matters:
for a copy to "host", if no destination was given, and the host is not
actually remote, then standard_output_file is used. In parallel mode
this guarantees that the resulting file will end up in a parallel-safe
location.
Tested on x86-64 Fedora 18.
* gdb.dwarf2/dw2-basic.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-compressed.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-intercu.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-intermix.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-producer.exp: Use gdb_remote_download.
* gdb.dwarf2/mac-fileno.exp: Use gdb_remote_download.
* lib/gdb.exp (gdb_remote_download): New proc.
This fixes a few gdb.dwarf2 tests to be more parallel-safe. This
mostly amounts to changing them to write their files into the
directory designated by standard_output_file.
Built and regtested on x86-64 Fedora 18.
* gdb.dwarf2/clztest.exp: Use standard_testfile.
* gdb.dwarf2/dw2-minsym-in-cu.exp: Use standard_testfile.
* gdb.dwarf2/fission-base.S: Remove directory from
DW_AT_GNU_dwo_name.
* gdb.dwarf2/fission-base.exp: Use build_executable. Set
debug-file-directory.
* gdb.dwarf2/fission-reread.S: Remove directory from
DW_AT_GNU_dwo_name.
* gdb.dwarf2/fission-reread.exp: Use build_executable. Set
debug-file-directory.
This introduces parallel mode for the test suite.
It doesn't fully work yet in the sense that if you do a fully parallel
run, you will encounter some file-name clashes, but this has to start
somewhere, and it seemed best to add some infrastructure now, so that
you can follow along and test subsequent patches if you care to.
This patch has two parts.
First, it checks for the GDB_PARALLEL variable. If this is set (say,
on the runtest command line), then the test suite assumes "parallel
mode". In this mode, files are put into a subdirectory named after
the test. That is, for DIR/TEST.exp, the outputs are put into
./outputs/DIR/TEST/.
This first part has various follow-on changes coming in subsequent
patches. This is why the code in this patch also makes "temp" and
"cache" directories.
Second, this adds an "inotify" mode. If you have the inotifywait
command (part of inotify-tools), you can set the GDB_INOTIFY variable.
This will tell the test suite to watch for changes outside of the
allowed output directories.
This mode is useful for debugging the test suite, as it issues a
report whenever a possibly parallel-unsafe file open is done.
2013-08-13 Tom Tromey <tromey@redhat.com>
Yao Qi <yao@codesourcery.com>
* lib/cache.exp (gdb_do_cache): Handle GDB_PARALLEL.
* lib/gdb.exp: Handle GDB_PARALLEL.
(default_gdb_version): Kill inotify_pid if it exists.
(default_gdb_exit): Emit warning if the inotify log is not
empty.
(standard_output_file): Respect GDB_PARALLEL.
(standard_temp_file): Likewise.
(gdb_init): Start inotifywait if requested.
* gdbint.texinfo (Testsuite): Use @table, not @itemize.
Document GDB_PARALLEL and GDB_INOTIFY.
http://sourceware.org/ml/gdb-patches/2013-08/msg00340.html
gdb/ChangeLog
* common/format.c (parse_format_string): Don't allow '#' flag for
pointer arguments in format string.
gdb/testsuite/ChangeLog
* gdb.base/printcmds.exp (test_printf): Add test for printf of
pointer with various flags.
In the fully parallel mode, each .exp file can be run in parallel (at
least conceptually -- the actual split may not be so severe). This
means that procs that compute a result and cache it are not going to
function very well. The test they run will be invoked over and over.
This patch introduces a generic caching mechanism and changes various
result-caching procs to use it. This is a cleanup to introduce the
basic change; the results aren't written to disk yet.
A caching proc is defined using gdb_caching_proc, which works like
"proc", except that it caches the result of the body.
* lib/cache.exp: New file.
* lib/cell.exp (skip_cell_tests): Use gdb_caching_proc.
* lib/gdb.exp: Load cache.exp.
(support_complex_tests, is_ilp32_target, is_lp64_target)
(is_amd64_regs_target, skip_altivec_tests, skip_vsx_tests)
(gdb_skip_xml_test): Use gdb_caching_proc.
* lib/opencl.exp (skip_opencl_tests): Use gdb_caching_proc.
This adds a new helper proc, standard_temp_file. This proc takes a
file name and returns a possibly-qualified form. This lets us make
parallel runs use a directory other than ".", which helps the inotify
mode.
This initial patch introduces the proc and changes a few spots to use
it.
* lib/gdb.exp (standard_temp_file): New proc.
(support_complex_tests, is_ilp32_target, is_lp64_target)
(is_amd64_regs_target, skip_altivec_tests, skip_vsx_tests): Use
standard_temp_file.
A few spots in lib make output files, either in "." or in
$objdir/$subdir.
This patch changes these spots to use standard_output_file.
This help the parallelization project.
* lib/gdb.exp (build_id_debug_filename_get): Use
standard_output_file.
* lib/prelink-support.exp (section_get)
(build_executable_own_libs): Use standard_output_file.
* stack.c (read_frame_arg): Set 'entryval_error' to NULL if
'entryval' is set.
gdb/testsuite/
* gdb.trace/collection.exp (gdb_collect_args_test): Set
"only" and "both" to 'print entry-values' before selecting
trace frame.
* frame.h (read_frame_local): Declare.
* mi/mi-cmd-stack.c (list_args_or_locals): Call
read_frame_local.
* stack.c (read_frame_local): New.
gdb/testsuite/
* gdb.trace/mi-trace-unavailable.exp: Don't set
"print entry-values" to "no".
(test_trace_unavailable): Set various values to
"print entry-values" to test that the output of
'-stack-list-locals' is not affected, and then set
set "print entry-values" to "no".
* gdb.python/py-value-cc.exp: Update.
* gdb.python/py-value.exp: Use different names for .o files for
C and C++. Only perform C++ tests if !skip_cplus_tests.
With "dwz -m", "main" appears in both the PU and the importing CU when
running anon-struct.exp. However, the PU does not have a file name.
So, find_main_filename returns the empty string, making
deduce_language_from_filename return language_unknown.
This patch fixes this problem by changing gdb to use the ordinary
symbol-lookup functions to find "main"'s symbol. Then, it examines the
symbol's language.
I think this is cleaner than the current approach. For one thing it
avoids trying to guess the language based on the source file name,
instead deferring to the presumably more reliable debuginfo.
Another possible fix would have been to change how the file name is
found via the "qf" methods. However, I think the approach given is
preferable for the reason outlined above.
This required a minor test suite change, as now a symtab is expanded
during the search for "main".
Built and regtested (both ways) on x86-64 Fedora 18.
* symfile.c (set_initial_language): Look up "main" symbol
and use its language.
* symtab.c (find_main_filename): Remove.
* symtab.h (find_main_filename): Remove.
* gdb.base/maint.exp: Allow zero symtabs to be expanded.
Doug pointed out a while ago that in the final dwz -m patch, nothing
ever set symtab::user.
This patch fixes this oversight and adds a test case showing why it is
important.
Built and regtested (both ways) on x86-64 Fedora 18.
The new test unconditionally tests the partial unit machinery, which I
think is an added plus.
* dwarf2read.c (recursively_compute_inclusions): Add
"immediate_parent" argument. Set symtab's "user" field
if not set.
(compute_symtab_includes): Update.
* gdb.dwarf2/dwz.exp: New file.
This patch fixes PR symtab/15719.
The bug is that "watch -location" crashes on a certain expression.
The problem is that fetch_subexp_value is catching an exception.
For ordinary watchpoints this is ok; but for location watchpoints,
it is better for the exception to propagate.
Built and regtested on x86-64 Fedora 18.
New test case included.
PR symtab/15719:
* breakpoint.c (update_watchpoint, watchpoint_check)
(watch_command_1): Update.
* eval.c (fetch_subexp_value): Add "preserve_errors"
parameter.
* ppc-linux-nat.c (check_condition): Update.
* value.h (fetch_subexp_value): Update.
* gdb.base/watchpoint.c (struct foo5): New.
(nullptr): New global.
* gdb.base/watchpoint.exp (test_watch_location): Add test.
* dwarf2read.c (struct dwarf2_per_cu_data): New member tu_read.
(fill_in_sig_entry_from_dwo_entry): Reorganize asserts.
Add assert of sig_entry->dwo_unit == NULL.
(lookup_dwo_signatured_type): Don't assign TU to a DWO if the TU
had already been read.
(read_signatured_type): Set per_cu.tu_read.
testsuite/
* gdb.dwarf2/fission-mix.exp: New file.
* gdb.dwarf2/fission-mix.h: New file.
* gdb.dwarf2/fission-mix.c: New file.
* gdb.dwarf2/fission-mix2.c: New file.
* tracepoint.c (trace_dump_command): Select the current frame.
gdb/testsuite/
* gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Test command
'tdump' on stack frame 0 and 1 respectively.
* gdb.trace/backtrace.exp: Don't invoke 'get_exit' and
'gdb_start'.
Invoke 'prepare_for_testing' instead of 'gdb_compile'.
Use gdb_test_no_output to issue commands 'tstart' and 'tstop'.
http://sourceware.org/ml/gdb-patches/2013-07/msg00317.html
gdb/ChangeLog
* value.c (value_fetch_lazy): Mark optimized out values as such
rather than raising an error.
gdb/testsuite/ChangeLog
* gdb.dwarf2/pieces-optimized-out.exp: Expect "<optimized out>"
when printing an optimized out value. Expect an error when using
an optimized out value in an expression.
http://sourceware.org/ml/gdb-patches/2013-07/msg00316.html
gdb/ChangeLog
* value.c (value_fetch_lazy): Ensure parent value is not lazy
before checking which bits of the parent, not the child, value are
valid.
gdb/testsuite/ChangeLog
* gdb.dwarf2/pieces-optimized-out.exp: New file.
* gdb.dwarf2/pieces-optimized-out.c: New file.
* gdb.dwarf2/pieces-optimized-out.S: New file.
PR gdb/15715
* top.c: Include "filenames.h".
(set_history_filename): New function.
(init_main): Install it as set hook of the "set history filename"
command.
2013-07-30 Muhammad Bilal <mbilal@codesourcery.com>
PR gdb/15715
* gdb.base/setshow.exp: Test that relative paths passed to
'set history filename' are converted to absolute paths.
of f77.
Allow for compiler variations of integer types.
Use mi_create_varobj.
Use mi_list_varobj_children for the immediate children of `array'.
Add "has_more" attribute for grandchildren test.
When GDB is run with IO redirected to a pipe, the 'interrupt' command
causes it to kill its own process group instead of the inferior's.
The problem manifests itself in async mode, native debugging:
$ cat | gdb <file>
(gdb) set target-async on
(gdb) run &
(gdb) interrupt
A debugging session is active.
Inferior 1 [process 20584] will be killed.
Quit anyway? (y or n) [answered Y; input not from terminal]
In this case, GDB tells that its stdin isn't a tty and doesn't save
the inferior's process group in
inflow.c:terminal_init_inferior_with_pgrp. The 'interrupt' command
tries to 'kill' the inferior's process group in
`inf-ptrace.c:inf_ptrace_stop`, but since that wasn't saved in the
first place, GDB kills process group 0, meaning, its own process
group.
When GDB is used from a frontend, that means killing its own process
group including the frontend and possibly the X session. This was
originally seen with SublimeGDB:
https://github.com/quarnster/SublimeGDB/issues/29.
The patch makes GDB save the inferior pgid regardless of having a
terminal, as pgid is used not only to reset foreground process group,
but also to interrupt the inferior process. It also adds a regression
test. Luckily, we can emulate not having a terminal with "set
interactive-mode off", avoiding the need of special magic to spawn gdb
with a pipe.
Tested on x86_64 Fedora 17.
gdb/
2013-07-26 Cyril Nikolaev <cyril@nichtverstehen.de>
* inflow.c (terminal_init_inferior_with_pgrp): Save inferior
process group regardless of having tty on stdin.
gdb/testsuite/
2013-07-26 Pedro Alves <palves@redhat.com>
* gdb.base/interrupt-noterm.c, gdb.base/interrupt-noterm.exp: New
files.
http://sourceware.org/ml/gdb-patches/2013-07/msg00236.html
gdb/ChangeLog
* mi/mi-main.c (output_register): Make MI 'r' format use standard
'z' format code. Remove error for optimized out values, standard
code will handle these fine.
gdb/testsuite/ChangeLog
* gdb.mi/mi-reg-undefined.exp: New file.
* gdb.mi/mi-reg-undefined.c: Likewise.
* gdb.mi/mi-reg-undefined.S: Likewise.
http://sourceware.org/ml/gdb-patches/2013-07/msg00235.html
gdb/ChangeLog
* NEWS: Mention new 'z' formatter.
* printcmd.c (print_scalar_formatted): Add new 'z' formatter.
(_initialize_printcmd): Mention 'z' formatter in help text of the
'x' command.
gdb/doc/ChangeLog
* gdb.texinfo (Output Formats): Mention the new 'z' formatter.
gdb/testsuite/ChangeLog
* gdb.base/printcmds.exp (test_print_int_arrays): Add tests for x,
z, o, and t output formats.
* gdb.base/display.exp: Use 'k' as an undefined format now that
'z' is defined.
* gdb.mi/mi-var-cmd.exp: If host is remote, use ${testfile} on
host.
* gdb.mi/mi-basics.exp (test_exec_and_symbol_mi_operatons):
Likewise. If host is remote, copy ${binfile} to host.
disp-step-syscall.exp is not run for ARM targets because ARM syscall
instructions have not been added to the list of possible syscall
instructions. This patch adds ARM syscall instructions to enable
disp-step-syscall.exp tests for ARM targets. Attached patch is tested
on ARMv7 and helps pass all disp-step-syscall.exp tests for ARM
targets.
gdb/testsuite/ChangeLog:
2013-07-19 Omair Javaid <Omair.Javaid@linaro.org>
* gdb.base/disp-step-syscall.exp: Add svc and swi syscall
instructions and enable disp-step-syscall for arm targets.
The ARM assembler recognises @ symbol as a comment marker and
therefore is unable to assemble some of gdb.dwarf2 testsuite tests.
This patch replaces all occurrences of @ symbol with % sign to allow
tests stay compatible with both ARM and x86 assembly. This patch has
been tested on x86_64 and ARMv7 targets.
gdb/testsuite/ChangeLog:
2013-07-19 Omair Javaid <Omair.Javaid@linaro.org>
* gdb.dwarf2/fission-reread.S: Replace @ sign with % sign to remove
assembler errors on arm.
* gdb.dwarf2/mac-fileno.S: Likewise.
* gdb.dwarf2/member-ptr-forwardref.S: Likewise.
* gdb.dwarf2/pr13961.S: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Pass the tail name of
$dest to link options if host is remote. Move the
generated file to $dest.a on host if host is remote.
On Ubuntu by default the compiler passes --as-needed to ld which
means no DT_NEEDED entry is added for libpthread when building
the TLS tests. This causes the test to fail as libpthread is
required to look up TLS variables. Add calls to pthread_testcancel
to make sure libpthread gets linked.
gdb/testsuite/ChangeLog:
2013-07-18 Will Newton <will.newton@linaro.org>
* gdb.threads/tls-nodebug.c: Call pthread_testcancel
to ensure the test is linked against pthreads.
* gdb.threads/tls-var-main.c: Likewise.
* gdb.threads/tls-shared.c: Likewise.
* lib/future.exp (gdb_default_target_compile): Use tail name
of $destfile as the output name of compile. Move the
generated file to $destfile on build.
* lib/gdb.exp (gdb_compile): Set
gdb_saved_set_unbuffered_mode_obj to
set_unbuffered_mode_saved.o if host is remote. Invoke
remote_download to copy $unbuf_obj to host.
http://sourceware.org/ml/gdb-patches/2013-07/msg00322.html
gdb/ChangeLog
* common/format.c (parse_format_string): Add checks for NULL
character before calling strchr.
gdb/testsuite/ChangeLog
* gdb.base/printcmds.exp (test_printf): Add tests for format
strings with missing format specifier.
This is another simple test suite change for the parallelization
project.
This changes mi-basics.exp to avoid the use of subdir and objdir and
instead use standard_output_file.
There are still some uses of objdir, but as noted in a new comment in
the patch, these uses are parallel-safe.
* gdb.mi/mi-basics.exp: Use standard_output_file.
(test_dir_specification, test_cwd_specification)
(test_path_specification): Use testsubdir, not subdir and objdir.
This is a minor fix to clean up the last remaining test suite
parallelization issue in gdb.trace.
mi-traceframe-changed.exp refers to objdir. This patch changes the
code to have the same effect, but avoid using that variable.
* gdb.trace/mi-traceframe-changed.exp: Don't use objdir.
PR threads/13217
* thread.c (thread_apply_all_command): Check for valid threads
and thread count.
(thread_array_cleanup): New struct.
(set_thread_refcount): New function.
This patch adds some tests that evidence a regression fixed by
the following patch from Pedro Alves:
[PATCH] ada-lang.c:coerce_unspec_val_to_type: Preserve laziness
http://www.sourceware.org/ml/gdb-patches/2013-07/msg00178.html
gdb/testsuite/ChangeLog:
* gdb.ada/arrayptr/foo.adb: Add some code defining an access
to a packed array.
* gdb.ada/arrayptr.exp: Add a few tests using that new access
to packed array.
If enough information is provided by the compiler, the debugger
now prints the entry value of various parameters:
(gdb) continue
Continuing.
Breakpoint 2, pck.call_me (w=w@entry=50) at [...]
20 Last_Word := W;
This patch adjusts the expected output to allow an optional
"w@entry=" in the parameter value.
gdb/testsuite/ChangeLog:
* gdb.ada/small_reg_param.exp: Accept optional entry value
for parameter "w".
Enum values rename as well. All uses updated.
* valprint.h (value_print_options): Rename member pretty to
pretty format. Rename member prettyprint_arrays to
prettyformat_arrays. Rename member prettyprint_structs to
prettyformat_structs. All uses updated.
(get_no_prettyformat_print_options): Renamed from
get_raw_print_options.
* valprint.c (get_no_prettyformat_print_options): Renamed from
get_raw_print_options. All callers updated.
(show_prettyformat_structs): Renamed from show_prettyprint_structs.
All callers updated.
(show_prettyformat_arrays): Renamed from show_prettyprint_arrays.
All callers updated.
(_initialize_valprint): Improve help text for "set print pretty" and
"set print arrays".
testsuite/
* gdb.base/default.exp: Update expected output of "show print array"
and "show print pretty".
ARM uses @ as a comment character, but % seems to be usable by all
existing ifunc enabled architectures.
gdb/testsuite/ChangeLog:
2013-07-05 Will Newton <will.newton@linaro.org>
* gdb.base/gnu-ifunc-lib.c: Use %function instead of @function
in asm syntax to allow building on ARM.
gdb/ChangeLog
* stack.c (read_frame_arg): No longer fetch lazy values.
* value.c (value_optimized_out): If the value is not already
marked optimized out, and is lazy then fetch it.
(value_primitive_field): Move optimized out check to later in the
function, after we have loaded any lazy values.
(value_fetch_lazy): Use optimized out flag directly rather than
calling optimized_out method.
gdb/testsuite/ChangeLog
* gdb.dwarf2/dw2-reg-undefined.exp: New file.
* gdb.dwarf2/dw2-reg-undefined.c: Likewise.
* gdb.dwarf2/dw2-reg-undefined.S: Likewise.
Joel Brobecker
Luis Machado
Tom Tromey
Doug Evans
Omair Javaid
Keith Seitz
Doug Evans
Phil Muldoon
Doug Evans
Yao Qi
Maciej W. Rozycki
Andrew Burgess
Ulrich Weigand
Nicolas Blanc
Pedro Alves
Tom de Vries
Anton Kolesov
Jose E. Marchesi
Maciej W. Rozycki
Jan Kratochvil
Ulrich Weigand
Joel Brobecker
Andreas Krebbel
Sergio Durigan Junior
Yufeng Zhang
Stan Shebs
Sanimir Agovic
Muhammad Bilal
Sterling Augustine
Muhammad Waqas
Ali Anwar
Will Newton
Hui Zhu
Luis Machado