For the BTS recording format, we sometimes get a FROM->TO record where the
FROM address lies in the kernel and the TO address lies in user space at
whatever address the user process was resumed.
GDB has a heuristic to filter out such records based on looking at the most
significant bit in the PC. This works fine for 64-bit systems but it doesn't
always work for 32-bit systems. Libraries that are loaded at fairly high
addresses might be mistaken for kernel code and branches inside the library
are filtered out.
Change the heuristic to (again heuristically) try to determine the lowest
address in kernel space. Any PC that is smaller than that should be in
user space.
On today's systems, there should be a symbol "_text" at that address.
Read /proc/kallsyms and search for that symbol.
It is not guaranteed that /proc/kallsyms is readable on all systems. On
64-bit systems, we fall back to check the most significant bit. On 32-bit
systems, we refrain from filtering out addresses.
The filtering should really be done by the kernel. And it soon will be:
https://lkml.org/lkml/2015/8/31/212.
gdb/
* nat/linux-btrace.h (struct btrace_target_info) <ptr_bits>: Remove.
* nat/linux-btrace.c: Include filestuff.h and inttypes.h.
Remove include of sys/utsname.h.
(linux_determine_kernel_ptr_bits): Remove.
(linux_determine_kernel_start): New.
(perf_event_is_kernel_addr): Remove tinfo argument. Update users.
Update check.
(perf_event_skip_bts_record): Remove tinfo argument. Update users.
(linux_enable_bts, linux_enable_pt): Remove tinfo->ptr_bits
initialization.
* x86-linux-nat.c (x86_linux_enable_btrace): Remove ptr_bits
assignment.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Remove.
(linux_target_ops): Replace linux_low_enable_btrace with
linux_enable_btrace.
2015-09-08 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.threads/hand-call-in-threads.exp: Make sure the thread
command actually switches threads. Give up on remaining
tests if target fails to stop at breakpoint.
The new orphan handling tests added in commit c005eb9 fail on a range of
targets. Some of the failures were fixed in commit e32aa93 but not
all. This commit should address the remaining failures.
Update results to account for orphan sections being placed in different
orders, and for other, target specific sections, being discarded.
ld/testsuite/ChangeLog:
* ld-elf/orphan-7.map: Allow for other discarded sections.
* ld-elf/orphan-8.map: Updated to allow for different section
ordering on different targets.
* ld-elf/orphan.ld: Place .sbss section.
Building GDB in C++ mode on Fedora 20, the gdb/guile/ code shows ~280
errors like:
src/gdb/guile/guile.c:515:1: error: invalid conversion from ‘scm_unused_struct* (*)(SCM, SCM) {aka scm_unused_struct* (*)(scm_unused_struct*, scm_unused_struct*)}’ to ‘scm_t_subr {aka void*}’ [-fpermissive]
This commit fixes them all.
gdb/ChangeLog:
2015-09-07 Pedro Alves <palves@redhat.com>
* guile/guile-internal.h (as_a_scm_t_subr): New.
* guile/guile.c (misc_guile_functions): Use it.
* guile/scm-arch.c (arch_functions): Use it.
* guile/scm-block.c (block_functions, gdbscm_initialize_blocks):
Use it.
* guile/scm-breakpoint.c (breakpoint_functions): Use it.
* guile/scm-cmd.c (command_functions): Use it.
* guile/scm-disasm.c (disasm_functions): Use it.
* guile/scm-exception.c (exception_functions)
(private_exception_functions): Use it.
* guile/scm-frame.c (frame_functions)
* guile/scm-gsmob.c (gsmob_functions): Use it.
* guile/scm-iterator.c (iterator_functions): Use it.
* guile/scm-lazy-string.c (lazy_string_functions): Use it.
* guile/scm-math.c (math_functions): Use it.
* guile/scm-objfile.c (objfile_functions): Use it.
* guile/scm-param.c (parameter_functions): Use it.
* guile/scm-ports.c (port_functions, private_port_functions): Use
it.
* guile/scm-pretty-print.c (pretty_printer_functions): Use it.
* guile/scm-progspace.c (pspace_functions): Use it.
* guile/scm-string.c (string_functions): Use it.
* guile/scm-symbol.c (symbol_functions): Use it.
* guile/scm-symtab.c (symtab_functions): Use it.
* guile/scm-type.c (type_functions, gdbscm_initialize_types): Use
it.
* guile/scm-value.c (value_functions): Use it.
The previous commit to fix PR gold/18886 converted STT_IFUNC
to STT_FUNC when resolving to a symbol defined in a shared library.
This leads to an internal error if the shared library symbol is
seen first, as we do not convert the symbol at all.
We need to override the STT_IFUNC in add_from_dynobj() instead of
in override_base().
gold/
PR gold/18930
PR gold/18886
* resolve.cc (Symbol::override_base): Don't convert IFUNC symbols here.
* symtab.cc (Symbol_table::add_from_dynobj): Convert them here instead.
Replace the options --warn-orphan and --no-warn-orphan with a single
option --orphan-handling=MODE, where mode can be place, warn, error, and
discard.
Mode 'place' is the default, and is the current behaviour, placing the
orphan section into a suitable output section.
Mode 'warn' is the same as '--warn-orphan'. The orphan is also placed
using the same algorithm as for 'place'.
Mode 'error' is the same as '--warn-orphan' and '--fatal-warnings'.
Mode 'discard' assigns all output sections to the /DISCARD/ section.
ld/ChangeLog:
* ld.h (enum orphan_handling_enum): New.
(ld_config_type): Remove warn_orphan, add orphan_handling.
* ldemul.c (ldemul_place_orphan): Remove warning about orphan
sections.
* ldlang.c (ldlang_place_orphan): New function.
(lang_place_orphans): Call ldlang_place_orphan.
* ldlex.h (enum option_values): Remove OPTION_WARN_ORPHAN and
OPTION_NO_WARN_ORPHAN, add OPTION_ORPHAN_HANDLING.
* lexsup.c (ld_options): Remove 'warn-orphan' and
'no-warn-orphan', add 'orphan-handling'.
(parse_args): Remove handling for OPTION_WARN_ORPHAN and
OPTION_NO_WARN_ORPHAN, add handling for OPTION_ORPHAN_HANDLING.
* NEWS: Replace text about --warn-orphan with --orphan-handling.
* ld.texinfo (Options): Remove --warn-orphan entry and add
entry on --orphan-handling.
(Orphan Sections): Add reference to relevant command line options.
ld/testsuite/ChangeLog:
* ld-elf/elf.exp: Switch to rely on run_dump_test.
* ld-elf/orphan-5.l: Update expected output.
* ld-elf/orphan-5.d: New file.
* ld-elf/orphan-6.d: New file.
* ld-elf/orphan-6.l: New file.
* ld-elf/orphan-7.d: New file.
* ld-elf/orphan-7.map: New file.
* ld-elf/orphan-8.d: New file.
* ld-elf/orphan-8.map: New file.
In the following code:
struct symbol *wsym = (struct symbol *) NULL;
the cast of NULL is redundant, it adds noise, and is just one more thing
to change if the type of wsym ever changes. There are a relatively
small number of places in gdb where the above code pattern is used.
Usually the cast is removed like this:
struct symbol *wsym = NULL;
This commit updates all the places within the gdb/tui directory where we
cast NULL during assignment, removing the cast.
gdb/ChangeLog:
* tui/tui-data.c (win_with_focus): Remove cast of NULL pointer.
(tui_next_win): Likewise.
(tui_prev_win): Likewise.
(tui_partial_win_by_name): Likewise.
(tui_init_generic_part): Likewise.
(init_content_element): Likewise.
(tui_del_window): Likewise.
(tui_free_window): Likewise.
(tui_del_data_windows): Likewise.
(tui_free_data_content): Likewise.
* tui/tui-layout.c (make_source_or_disasm_window): Likewise.
* tui/tui-regs.c (tui_show_register_group): Likewise.
* tui/tui-win.c (tui_resize_all): Likewise.
(tui_set_focus): Likewise.
(tui_set_win_height): Likewise.
(make_invisible_and_set_new_height): Likewise.
* tui/tui-windata.c (tui_delete_data_content_windows): Likewise.
* tui/tui-wingeneral.c (make_visible): Likewise.
In the following code:
struct symbol *wsym = (struct symbol *) NULL;
the cast of NULL is redundant, it adds noise, and is just one more thing
to change if the type of wsym ever changes. There are a relatively
small number of places in gdb where the above code pattern is used.
Usually the cast is removed like this:
struct symbol *wsym = NULL;
This commit updates all the places within the gdb/cli directory where we
cast NULL during assignment, removing the cast.
gdb/ChangeLog:
* cli/cli-decode.c (find_cmd): Remove cast of NULL pointer.
In the following code:
struct symbol *wsym = (struct symbol *) NULL;
the cast of NULL is redundant, it adds noise, and is just one more thing
to change if the type of wsym ever changes. There are a relatively
small number of places in gdb where the above code pattern is used.
Usually the cast is removed like this:
struct symbol *wsym = NULL;
This commit updates all the places within the gdb/ directory where we
cast NULL during assignment, removing the cast.
gdb/ChangeLog:
* c-valprint.c (print_unpacked_pointer): Remove cast of NULL
pointer.
* dbxread.c (dbx_end_psymtab): Likewise.
* gnu-nat.c (gnu_write_inferior): Likewise.
* mdebugread.c (cross_ref): Likewise.
* p-valprint.c (pascal_val_print): Likewise.
* xcoffread.c (xcoff_end_psymtab): Likewise.
Before this change, trying to call an overloaded function with at least
one character literal in argument would fail. For instance, given these
two functions:
function F (C : Character) return Integer is
begin
return Character'Pos (C);
end F;
function F (I : Integer) return Integer is
begin
return -I;
end F;
We would get the following GDB session:
(gdb) p f('A')
$1 = -65
(gdb) p f(1)
$1 = -1
This is wrong because the first call should select the first F function
and thus return 65.
The root problem is that ada-lang.c:ada_language_arch_info stores in
string_char_type a type whose code is TYPE_CODE_INT instead of
TYPE_CODE_CHAR. As a result, all parsed character literals are turned
into integer values and during overload matching, the TYPE_CODE_CHAR
formal rejects the TYPE_CODE_INT actual.
This change turns string_char_type into a true TYPE_CODE_CHAR type in
ada-lang.c so that we have instead the expected:
(gdb) p f('A')
$1 = 65
gdb/ChangeLog:
* ada-lang.c (ada_language_arch_info): Create a TYPE_CODE_CHAR
type instead of a TYPE_CODE_INT one for the string_char_type
and the ada_primitive_type_char types.
gdb/testsuite/ChangeLog:
* gdb.ada/funcall_char.exp: New testcase.
* gdb.ada/funcall_char/foo.adb: New file.
Tested on x86_64-linux, no regression.
PR binutils/18879
* readelf.c (get_unwind_section_word): Check for negative offsets
and very small sections.
(dump_arm_unwind): Warn if the table offset is too large.
Nowadays, if user requests HW watchpoint to monitor a large memory area
or unaligned area, aarch64 GDB will split into multiple aligned areas,
and use multiple debugging registers to watch them. However, the
registers are not updated in a transaction way. GDBserver doesn't revert
updates in previous iterations if some debugging registers fail to update
due to some reason, like no free debugging registers available, in the
latter iteration. For example, if we have a char buf[34], and watch buf
in gdb,
(gdb) watch buf
Hardware watchpoint 2: buf
(gdb) c
Continuing.
infrun: clear_proceed_status_thread (Thread 13466)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: step-over queue now empty
infrun: resuming [Thread 13466] for step-over
Sending packet: $m410838,22#35...Packet received: 00000000000000000000000000000000000000000000000000000000000000000000
infrun: skipping breakpoint: stepping past insn at: 0x400524
infrun: skipping breakpoint: stepping past insn at: 0x400524
Sending packet: $Z2,410838,22#80...Packet received: E01 <----- [1]
Packet Z2 (write-watchpoint) is supported
Sending packet: $Z0,7fb7fe0a8c,4#43...Packet received: OK
Warning:
Could not insert hardware watchpoint 2.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
GDB receives E01 for Z2 packet [1] but GDBserver updates the debugging
register status,
insert_point (addr=0x00410838, len=34, type=hw-write-watchpoint):
BREAKPOINTs:
BP0: addr=0x0, ctrl=0x00000000, ref.count=0
BP1: addr=0x0, ctrl=0x00000000, ref.count=0
BP2: addr=0x0, ctrl=0x00000000, ref.count=0
BP3: addr=0x0, ctrl=0x00000000, ref.count=0
BP4: addr=0x0, ctrl=0x00000000, ref.count=0
BP5: addr=0x0, ctrl=0x00000000, ref.count=0
WATCHPOINTs:
WP0: addr=0x410850, ctrl=0x00001ff5, ref.count=1
WP1: addr=0x410848, ctrl=0x00001ff5, ref.count=1
WP2: addr=0x410840, ctrl=0x00001ff5, ref.count=1
WP3: addr=0x410838, ctrl=0x00001ff5, ref.count=1
four debugging registers can not monitor 34-byte long area, so the last
iteration of updating debugging register state fails but previous
iterations succeed. This makes GDB think no HW watchpoint is inserted
but some debugging registers are used.
This problem was exposed by "watch buf" gdb.base/watchpoint.exp with
aarch64 GDBserver debugging arm 32-bit program. The buf is 30-byte long
but 4-byte aligned, and four debugging registers can't cover 34-byte
(extend 4 bytes to be 8-byte aligned) area. However, this problem
does exist on non-multi-arch debugging scenario as well.
This patch moves code in aarch64_linux_region_ok_for_hw_watchpoint to
aarch64_linux_region_ok_for_watchpoint in nat/aarch64-linux-hw-point.c.
Then, checks with aarch64_linux_region_ok_for_watchpoint, like what we
are doing in GDB. If the region is OK, call aarch64_handle_watchpoint.
Regression tested on aarch64 with both 64-bit program and 32-bit
program. Some fails in gdb.base/watchpoint.exp are fixed.
gdb:
2015-09-03 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_region_ok_for_hw_watchpoint):
Move code to aarch64_linux_region_ok_for_watchpoint. Call
aarch64_linux_region_ok_for_watchpoint.
* nat/aarch64-linux-hw-point.c (aarch64_linux_region_ok_for_watchpoint):
New function.
* nat/aarch64-linux-hw-point.h (aarch64_linux_region_ok_for_watchpoint):
Declare it.
gdb/gdbserver:
2015-09-03 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_insert_point): Call
aarch64_handle_watchpoint if aarch64_linux_region_ok_for_watchpoint
returns true.
Since the type whose name is being set is now being allocated on the
gdbarch obstack, we should allocate its TYPE_NAME on the obstack too.
This reduces the number of individual valgrind warnings for the command
"gdb gdb" from ~300 to ~150.
Tested on x86_64-unknown-linux-gnu.
gdb/ChangeLog:
* gdb_obstack.h (obstack_strdup): Declare.
* gdb_obstack.c (obstack_strdup): Define.
* gdbarch.sh (gdbarch_obstack_strdup): Declare and define.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbtypes.c (arch_type): Use gdbarch_obstack_strdup.
Following commit 8f57eec2fb ("Use gdbarch obstack to allocate types in
alloc_type_arch") it is no longer the case that the type returned by
copy_type_recursive is allocated using malloc. Because the function
uses alloc_type_arch internally, the new type is now allocated on the
gdbarch associated with the type, and is thus owned by that gdbarch.
gdb/ChangeLog:
* gdbtypes.c (copy_type_recursive): Update documentation.
Turn IFUNC symbols from shared libraries into normal FUNC symbols when
we are resolving symbol references, instead of when we are writing out
the symbol table.
PR gold/18886
* resolve.cc (Symbol::override_base): Turn IFUNC symbols from
shared libraries into normal FUNC symbols.
* symtab.cc (Symbol_table::sized_write_symbol): Assert IFUNC
symbols aren't from shared libraries.
Gold version of a4b6fadd. Don't emit long branch or plt branch stubs
to save/restore functions. Copy them instead.
PR 18878
* powerpc.cc (Target_powerpc): Add savres_section_ and accessor.
(Target_powerpc::Branch_info::make_stub): Determine whether long
branch stub is for save/restore function.
(Branch_stub_ent): Add save_res_, and extra parm to constructor.
(Stub_table): Add need_save_res_.
(Stub_table:clear_stubs): Clear need_save_res_.
(Stub_table:set_address_and_size): Add save/restore section size.
(Stub_table::add_long_branch_entry): Add save_res param. Set
need_save_res_, but don't add space for save/restore stubs.
(Stub_table::find_long_branch_entry): Return offset to local copy
of save/restore func.
(Stub_table::do_write): Don't output save/restore stubs. Instead
copy the save/restore functions.
(Output_data_save_res:contents): New accessor.
(Target_powerpc::define_save_restore_funcs): Set savres_section_.
Yet another BuildBot e-mail, yet another breakage on RHEL-7.1 s390x
(which uses an older GCC). This time,
solib-svr4.c:solib_event_probe_action has the probe_argc variable,
which is now inside a TRY..CATCH and therefore needs to be
initialized. Pushed as obvious.
gdb/ChangeLog:
2015-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
* solib-svr4.c (solib_event_probe_action): Initialize 'probe_argc'
as zero.
BuildBot e-mailed me to let me know that my last commit broke GDB on
RHEL-7.1 s390x. On solib-svr4.c:svr4_handle_solib_event, 'val' now
needs to be initialized as NULL because it is inside a TRY..CATCH
block. This patch does that. Pushed as obvious.
gdb/ChangeLog:
2015-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
* solib-svr4.c (svr4_handle_solib_event): Initialize 'val' as NULL
This patch is intended to make the interaction between the
probes-based dynamic linker interface and the SystemTap SDT probe code
on GDB more robust. It does that by wrapping the calls to the probe
API with TRY...CATCH'es, so that any exception thrown will be caught
and handled properly.
The idea for this patch came from
<https://bugzilla.redhat.com/show_bug.cgi?id=1196181>, which is a bug
initially filed against Fedora GDB (but now under Fedora GLIBC). This
bug happens on armhfp (although it could happen on other targets as
well), and is triggered because GCC generates a strange argument for
one of the probes used by GDB in the dynamic linker interface. As can
be seen in the bug, this argument is "-4@.L1052".
I don't want to discuss the reasons for this argument to be there
(this discussion belongs to the bug, or to another thread), but GDB
could definitely do a better error handling here. Currently, one sees
the following message when there is an error in the probes-based
dynamic linker interface:
(gdb) run
Starting program: /bin/inferior
warning: Probes-based dynamic linker interface failed.
Reverting to original interface.
Cannot parse expression `.L976 4@r4'.
(gdb)
Which means that one needs to explicitly issue a "continue" command to
make GDB continue running the inferior, even though this error is not
fatal and GDB will fallback to the old interface automatically.
This is where this patch helps: it makes GDB still print the necessary
warnings or error messages, but it *also* does not stop the inferior
unnecessarily.
I have tested this patch on the systems where this error happens, but
I could not come up with a way to create a testcase for it.
Nevertheless, it should be straightforward to see that this patch does
improve the current situation.
gdb/ChangeLog:
2015-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
* solib-svr4.c (solib_event_probe_action): Call
get_probe_argument_count using TRY...CATCH.
(svr4_handle_solib_event): Likewise, for evaluate_probe_argument.
This patch improves the error reporting when handling SystemTap SDT
probes. "Handling", in this case, mostly means "parsing".
On gdb/probe.h, only trivial changes on functions' comments in order
to explicitly mention that some of them can throw exceptions. This is
just to make the API a bit more clear.
On gdb/stap-probe.c, I have s/internal_error/error/ on two functions
that are responsible for parsing specific bits of the probes'
arguments: stap_get_opcode and stap_get_expected_argument_type. It is
not correct to call internal_error on such situations because it is
not really GDB's fault if the probes have malformed arguments. I also
improved the error reported on stap_get_expected_argument_type by also
including the probe name on it.
Aside from that, and perhaps most importantly, I added a check on
stap_get_arg to make sure that we don't try to extract an argument
from a probe that has no arguments. This check issues an
internal_error, because it really means that GDB is doing something it
shouldn't.
Although it can be considered almost trivial, and despite the fact
that I am the maintainer for this part of the code, I am posting this
patch for review. I will wait a few days, and if nobody has anything
to say, I will go ahead and push it.
gdb/ChangeLog:
2015-09-01 Sergio Durigan Junior <sergiodj@redhat.com>
* probe.h (struct probe_ops) <get_probe_argument_count,
evaluate_probe_argument, enable_probe, disable_probe>: Mention in
the comment that the function can throw an exception.
(get_probe_argument_count): Likewise.
(evaluate_probe_argument): Likewise.
* stap-probe.c (stap_get_opcode): Call error instead of
internal_error.
(stap_get_expected_argument_type): Likewise. Add argument
'probe'. Improve error message by mentioning the probe's name.
(stap_parse_probe_arguments): Adjust call to
stap_get_expected_argument_type.
(stap_get_arg): Add comment. Assert that 'probe->args_parsed' is
not zero. Call internal_error if GDB requests an argument but the
probe has no arguments.
Before this change, trying to complete an expression ending with an
ambiguous function name (i.e. for which there are multiple matches)
would display a menu with a prompt for the user to pick one. For
instance:
(gdb) p func<tab>Multiple matches for func
[0] cancel
[1] pack2.func at pack2.adb:5
[2] pack.func at pack.adb:5
>
This is not user friendly and actually triggered a segmentation fault
after the user did pick one. It is not clear whether the segmentation
fault needs a separate fix, but this is the only known case which
exhibits it at the moment, and this case must be fixed itself.
The problem lies in ada-lang.c (ada_resolve_function): when we got
multiple matches, we should not display the menu if we are in completion
mode. This patch adjusts the corresponding condition accordingly.
gdb/ChangeLog:
* ada-lang.c (ada_resolve_function): Do not ask the user what
match to use when in completion mode.
gdb/testsuite/ChangeLog:
* gdb.ada/complete.exp: Add "pck.ambiguous_func" to the relevant
expected outputs. Add two testcases for completing ambiguous
functions.
* gdb.ada/complete/aux_pck.adb: New file.
* gdb.ada/complete/aux_pck.ads: New file.
* gdb.ada/complete/foo.adb: Pull Aux_Pck and call the two
Ambiguous_Func functions.
* gdb.ada/complete/pck.ads: Add an Ambiguous_Func function.
* gdb.ada/complete/pck.adb: Likewise.
Tested on x86_64-linux, no regression.
We use its PLT entry to initialize function pointer at run-time. If
there is no other usage for the PLT entry, we can generate run-time
function pointer relocations in read-write section, which can be
resolved by dynamic linker, to initialize function pointers. It avoids
the extra indirect branch overhead in PLT.
bfd/
PR ld/18900
* elf32-i386.c (elf_i386_link_hash_entry): Add
func_pointer_refcount.
(elf_i386_link_hash_newfunc): Clear func_pointer_refcount.
(elf_i386_get_local_sym_hash): Likewise.
(elf_i386_copy_indirect_symbol): Also copy
func_pointer_refcount.
(elf_i386_check_relocs): Increment func_pointer_refcount.
(elf_i386_gc_sweep_hook): Decrement func_pointer_refcount.
(elf_i386_allocate_dynrelocs): Don't create the PLT entry if
there are only function pointer relocations which can be
resolved at run-time. Keep dynanamic relocations for run-time
function pointer initialization.
(elf_i386_relocate_section): Copy dynamic function pointer
relocations.
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Add
func_pointer_refcount.
(elf_x86_64_link_hash_newfunc): Clear func_pointer_refcount.
(elf_x86_64_get_local_sym_hash): Likewise.
(elf_x86_64_copy_indirect_symbol): Also copy
func_pointer_refcount.
(elf_x86_64_check_relocs): Increment func_pointer_refcount.
(elf_x86_64_gc_sweep_hook): Decrement func_pointer_refcount.
(elf_x86_64_allocate_dynrelocs): Don't create the PLT entry if
there are only function pointer relocations which can be
resolved at run-time. Keep dynanamic relocations for run-time
function pointer initialization.
(elf_x86_64_relocate_section): Copy dynamic function pointer
relocations.
ld/testsuite/
PR ld/18900
* ld-i386/i386.exp: Run tests for PR ld/18900.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr18900.out: New file.
* ld-i386/pr18900a.c: Likewise.
* ld-i386/pr18900a.c: Likewise.
* ld-i386/pr18900a.rd: Likewise.
* ld-i386/pr18900b.c: Likewise.
* ld-i386/pr18900b.rd: Likewise.
* ld-i386/pr18900c.c: Likewise.
* ld-x86-64/pr18900.out: Likewise.
* ld-x86-64/pr18900a.c: Likewise.
* ld-x86-64/pr18900a.rd: Likewise.
* ld-x86-64/pr18900b.c: Likewise.
* ld-x86-64/pr18900b.rd: Likewise.
* ld-x86-64/pr18900c.c: Likewise.
* ld-x86-64/mpx3.dd: Updated.
OPD lookup goes awry when .opd has been shuffled to remove unused
functions.
* elf64-ppc.c (ppc64_elf_maybe_function_sym): Adjust symbol value
if .opd section has been edited.
Don't emit long branch or plt branch stubs to save/restore functions.
Copy them instead. The problem is that plt branch stubs currently
trash r12, one of the parameters to some of the save/restore
functions, and there is no free register available to use instead of
r12.
6f20ed8a is prerequisite for this patch.
PR 18878
* elf64-ppc.c (ARRAY_SIZE): Define. Use throughout.
(enum ppc_stub_type): Add ppc_stub_save_res.
(struct map_stub): Add "next" and "needs_save_res".
(struct ppc_link_hash_entry): Add "save_res" flag.
(struct ppc_link_hash_table): Add "group".
(sfpr_define): Add stub_sec param. Define symbol in stub_sec if
stub_sec is non-null. Set "save_res".
(save_res_funcs): Make file scope, rename from funcs. Adjust uses.
(ppc64_elf_adjust_dynamic_symbol): Prohibit plt call to save_res syms.
(ppc_build_one_stub): Handle ppc_stub_save_res.
(ppc_size_one_stub): Set stub type to ppc_size_one_stub on finding
stub for linker defined save_res sym.
(group_sections): Init new fields of struct map_stub.
(ppc64_elf_size_stubs): Reserve space for save/restore func copy.
(ppc64_elf_build_stubs): Copy save/restore funcs to groups. Emit
alias syms too.
(ppc64_elf_relocate_section): Set destination for ppc_stub_save_res.
Sometimes these stubs don't need to change the low 16-bits of r2, so in
that case omit a useless addi r2,r2,0 insn. Also, change the get_r2off
error return from 0 to -1 since 0 is a valid return for ELFv2 -R objects.
* elf64-ppc.c (get_r2off): Return -1 on error.
(ppc_build_one_stub): Adjust for get_r2off change. Don't emit
addi r2,r2,0 on r2off stubs when the low 16-bit delta is zero.
(ppc_size_one_stub): Corresponding size changes for r2off stubs.
Add condition in test for -R objects.
Two organizational changes to the array of additional info kept for
sections.
1) Move group info into a per-group allocated struct, in preparation
for future changes that need per-group accounting.
2) Expand the array to include output sections, which simplifies
sizing and removes the need for a separate output section array.
* section.c (section_id): Make file scope.
(bfd_get_next_section_id): New function.
* elf64-ppc.c (struct map_stub): Remove toc_off field. Move decl.
(struct ppc_stub_hash_entry): Delete stub_sec and id_sec. Add
group. Update all uses.
(struct ppc_link_hash_table): Delete top_id, top_index, and
input_list. Add sec_info_arr_size. Rename stub_group to
sec_info, and make group info indirect. Update stub_group refs
throughout file.
(ppc_add_stub): Don't look for stub_sec on link_sec stub_group
entry.
(ppc_build_one_stub): Delete FIXME.
(ppc64_elf_setup_section_lists): Size htab->sec_info for all
sections, not just input sections. Don't create htab->input_list.
(ppc64_elf_next_input_section): Update to use sec_info union as
list pointer.
(PREV_SEC): Delete.
(group_sections): Pass "info" param rather than "htab". Iterate
over output sections rather than input_list. Use sec_info union
as list pointers. Alloc atruct map_stub, and return fail status.
* bfd-in2.h: Regenerate.
Small clean up to make a local variable const and remove a cast of NULL.
gdb/ChangeLog:
* tui/tui-data.c (tui_win_name): Make local variable const, remove
cast of NULL.
Use XSHAL_ABI value provided by xtensa-config.h to correctly initialize
xtensa_tdep.call_abi
This fixes calls to functions from GDB that otherwise fail with the
following assertion in call0 configuration:
gdb/regcache.c:602: internal-error: regcache_raw_read: Assertion
`regnum >= 0 && regnum < regcache->descr->nr_raw_registers' failed.
2015-08-31 Max Filippov <jcmvbkbc@gmail.com>
gdb/
* xtensa-tdep.h (XTENSA_GDBARCH_TDEP_INSTANTIATE): Initialize
call_abi using XSHAL_ABI macro.
Nick Clifton
Markus Metzger
Sandra Loosemore
GDB Administrator
Chen Gang
Andrew Burgess
Pedro Alves
Cary Coutant
H.J. Lu
Yao Qi
Pierre-Marie de Rodat
Patrick Palka
Alan Modra
Sergio Durigan Junior
Max Filippov