Some BMI/BMI2 insns allow their middle operands to be a memory one. In
such a case, matching register types between operands 0 and 1 as well as
1 and 2 won't help - operands 0 and 2 also need to be checked.
Make more obvious what the success and failure paths are, and in
particular that what used to be at the "skip" label can't be reached
by what used to be straight line code.
Just like for the AVX/AES and AVX/PCLMUL combinations, AVX/GFN,
AVX512F/GFNI, AVX512F/VAES, and AVX512F/PCLMUL need special handling to
deal with the pair of required checks specified in the templates.
Neither touches any XMM register, so the check is pointless. It is imo
even questionable whether in SSE2AVX mode the two should be converted to
their AVX counterparts.
fsub/fsubr/fsubp/fsubrp as well as fdiv/fdivr/fdivp/fdivrp disassembly
should match (a) the Intel SDM and (b) respective input fed to gas (both
of course with the exception of when we intentionally convert bogus
insns, accompanied by a warning).
Drop "second": For one there's no other source register (the other
source operand is in memory), and in Intel syntax such numbering would
also be wrong.
Take the opportunity and also
- properly place declarations ahead of statements
- use %u format for unsigned int arguments
- fix indentation
This requires a change to ModR/M handling: Recording of displacement
types must not discard operand size information. Change the respective
code to alter only .disp<N>.
Oops, not tested well enough. -mpower9 sets all the PPC_OPCODE_POWERn
for n <= 9.
* config/tc-ppc.c (ppc_handle_align): Correct last patch. Really
don't emit a group terminating nop for power9. Simplify cpu
tests.
Power9 doesn't have a group terminating nop, so we may as well emit a
normal nop for power9. Not that it matters a great deal, I believe
ori 2,2,0 will be treated exactly as ori 0,0,0 by the hardware.
* config/tc-ppc.c (ppc_handle_align): Don't emit a group
terminating nop for power9.
This changes to_fileio_readlink and target_fileio_readlink to return a
gdb::optional<std::sring>, and then fixes up the callers and
implementations. This allows the removal of some cleanups.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-07 Tom Tromey <tom@tromey.com>
* linux-tdep.c (linux_info_proc): Update.
* target.h (struct target_ops) <to_fileio_readlink>: Return
optional<string>.
(target_fileio_readlink): Return optional<string>.
* remote.c (remote_hostio_readlink): Return optional<string>.
* inf-child.c (inf_child_fileio_readlink): Return
optional<string>.
* target.c (target_fileio_readlink): Return optional<string>.
This option does not merge certain text sections with prefixes
.text.hot, .text.unlikely, .text.startup and .text.exit.
* layout.cc (Layout::default_section_order): Check for text section
prefixes.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
(Layout::output_section_name): Check for text section prefixes.
* layout.h (Output_section_order::ORDER_TEXT_HOT): New enum value.
(Output_section_order::ORDER_TEXT_STARTUP): New enum value.
(Output_section_order::ORDER_TEXT_EXIT): New enum value.
(Output_section_order::ORDER_TEXT_UNLIKELY): New enum value.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
* options.h (keep_text_section_prefix): New -z option.
* testsuite/Makefile.am (keep_text_section_prefix): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/keep_text_section_prefix.cc: New test source.
* testsuite/keep_text_section_prefix.sh: New test script.
The regcache cooked_read test needs to know which architectures have a
save_reggroup, riscv does and needs adding to the list.
gdb/ChangeLog:
* regcache.c (cooked_read_test): Add riscv to the list of
architectures that have a save_reggroup.
For absolute symbols which are forced local or not dynamic, the ABS relocation
should be resolved at static linking time.
Originally, an RELATIVE/ABS relocation will be generated even for absolution
symbols for the dynamic linker to resolve.
bfd/
2018-03-07 Renlin Li <renlin.li@arm.com>
PR ld/20402
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Check absolute symbol,
and don't emit relocation in specific case.
ld/
2018-03-07 Renlin Li <renlin.li@arm.com>
PR ld/20402
* testsuite/ld-aarch64/aarch64-elf.exp: Run new test.
* testsuite/ld-aarch64/pr20402.s: New.
* testsuite/ld-aarch64/pr20402.d: New.
Some of the watchpoint logic depends on the fact that the head of the
value chain represents the user-specified value to watch. Thus no
additional values should be added to the value chain after that. However,
if a watchpoint is defined for a C++ structure/class object, then run-time
type information (RTTI) may be present. Thus, while constructing the
value chain for the watchpoint, the dynamic type is fetched by
gnuv3_rrti_type, which invokes value_addr, which then adds a new value to
the head of the value chain. This new value represents the pointer to the
structure instead of the structure itself.
With such a "polluted" value chain the watchpoint logic does not recognize
when the user intended to watch a struct, and can_use_hardware_watchpoint
returns zero. Instead of a hardware watchpoint, a software watchpoint
will then be set for no apparent reason.
This is fixed by adding an early exit to gnuv3_rtti_type when the input
value is not a dynamic class object.
gdb/testsuite/ChangeLog:
* gdb.cp/watch-cp.cc: New test.
* gdb.cp/watch-cp.exp: New file.
gdb/ChangeLog:
* gnu-v3-abi.c (gnuv3_rtti_type): Add early exit if the given
value is not a dynamic class object.
xcoff (32-bit) objdump accepted but ignored -M options unless
-mpowerpc was also given. This patch fixes that, leaving the default
as -Mpwr for xcoff. I've also enabled more tests for xcoff targets.
binutils/
* configure.ac: Add objdump_private_desc_xcoff for rs6000.
* configure: Regenerate.
gas/
* testsuite/gas/ppc/aix.exp: Run for rs6000 too.
* testsuite/gas/ppc/ppc.exp: Run more tests for non-ELF targets.
* testsuite/gas/ppc/machine.d: Don't run for PE targets.
opcodes/
* disassemble.c (disassembler): Use bfd_arch_powerpc entry for
bfd_arch_rs6000.
* disassemble.h (print_insn_rs6000): Delete.
* ppc-dis.c (powerpc_init_dialect): Handle rs6000.
(disassemble_init_powerpc): Call powerpc_init_dialect for rs6000.
(print_insn_rs6000): Delete.
I noticed a few formatting buglets in rust-exp.y: A couple of lines
were too long, and a couple of parser rules did not follow the same
formatting as the rest of the code.
I'm checking this in as obvious. Tested by rebuilding.
2018-03-06 Tom Tromey <tom@tromey.com>
* rust-exp.y: Formatting fixes.
Some parts of the target description support were committed with the
initial riscv patch. As target descriptions are not currently supported
on riscv this commit removes the two pieces for code that relate to
target description support.
It is expected that target description support will be added in the
future, at which point this, or similar code will be added back.
gdb/ChangeLog:
* riscv-tdep.c (riscv_register_name): Remove target description
support.
(riscv_gdbarch_init): Remove target description check.
The GDB coding standard states these lines should never have been
added.
gdb/ChangeLog:
* riscv-tdep.c: Remove 'Contributed by ...' lines from header
comment.
* riscv-tdep.h: Likewise.
The code making use of pseudo registers was initially intended to
support running 32-bit ABI files on 64-bit riscv targets. However, the
implementation was incomplete, and broken.
For now I've removed all reference to pseudo registers from the riscv
target, we've not lost any functionality, and this cleans up failures in
the selftests.
Once the riscv target has matured a little we'll probably end up
bringing back some of the use of pseudo registers in order to better
support running 32-bit executables on a 64-bit target.
gdb/ChangeLog:
* riscv-tdep.c (riscv_pseudo_register_read): Delete.
(riscv_pseudo_register_write): Delete.
(riscv_gdbarch_init): Remove all use of pseudo registers.
This patch replaces the cleanups that close the list and tuple of the
btrace instruction history output with ui_out_emit_tuple and
ui_out_emit_list.
This allows removing make_cleanup_ui_out_tuple_begin_end and
make_cleanup_ui_out_list_begin_end.
This patch (along with the previous ones in the series) was regtested on
the buildbot.
gdb/ChangeLog:
* record-btrace.c (btrace_print_lines): Replace cleanup
parameter with RAII equivalents.
(btrace_insn_history): Replace cleanup with RAII equivalents.
* ui-out.h (make_cleanup_ui_out_list_begin_end,
make_cleanup_ui_out_tuple_begin_end): Remove.
* ui-out.c (struct ui_out_end_cleanup_data, do_cleanup_end,
make_cleanup_ui_out_end, make_cleanup_ui_out_tuple_begin_end,
make_cleanup_ui_out_list_begin_end): Remove.
This patch replaces two VEC(tp_t) with std::vector<thread_info *>, which
allows to remove two cleanups. To make it easier to map the old code to
the new code, I added the ordered_remove and unordered_remove functions,
which operate on std::vector and do the same as VEC's
ordered_remove/unordered_remove.
gdb/ChangeLog:
* record-btrace.c (record_btrace_maybe_mark_async_event): Change
parameter types to std::vector. Use bool.
(record_btrace_wait): Replace VEC(tp_t) with
std::vector<thread_info *>.
* common/gdb_vecs.h (unordered_remove, ordered_remove): New.
This patch removes a cleanup that disables btrace on threads in case of
failure, so we don't leave it enabled for some the threads and disabled
for the rest.
gdb/ChangeLog:
* record-btrace.c (record_btrace_disable_callback): Remove.
(struct scoped_btrace_disable): New.
(record_btrace_open): Use scoped_btrace_disable.
Should use a ULONGEST when reading from the regcache.
gdb/ChangeLog:
* riscv-tdep.c (riscv_return_value): Change type to ULONGEST for
reading values from registers.
Some of the format strings used in the new riscv target were incorrect,
resulting in build failures on some hosts. This commit does the
following:
1. Uses core_addr_to_string for formatting CORE_ADDR types.
2. Fixes legacy use of stderr for logging in one place that got
missed, instead gdb_stdlog is used.
3. Re-indent a few printf related lines that were wrong.
This should resolve some (but not all) of the build failures the new
riscv target introduced.
gdb/ChangeLog:
* riscv-tdep.c (riscv_print_arg_location): Add header comment,
change parameter type. Use GDB's print functions, and use
core_addr_to_string where appropriate.
(riscv_push_dummy_call): Use core_addr_to_string where
appropriate, update call to riscv_print_arg_location, and reindent
a few lines.
(riscv_return_value): Update call to riscv_print_arg_location.
This commit introduces basic support for baremetal RiscV as a GDB
target. This target is currently only tested against the RiscV software
simulator, which is not included as part of this commit. The target has
been tested against the following RiscV variants: rv32im, rv32imc,
rv32imf, rv32imfc, rv64im, rv64imc, rv64imfd, rv64imfdc.
Across these variants we pass on average 34858 tests, and fail 272
tests, which is ~0.8%.
The RiscV has a feature of its ABI where structures with a single
floating point field, a single complex float field, or one float and
one integer field are treated differently for argument passing. The
new test gdb.base/infcall-nested-structs.exp is added to cover this
feature. As passing these structures should work on all targets then
I've made the test as a generic one, even though, for most targets,
there's probably nothing special about any of these cases.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add riscv-tdep.o
(HFILES_NO_SRCDIR): Add riscv-tdep.h.
(ALLDEPFILES): Add riscv-tdep.c
* configure.tgt: Add riscv support.
* riscv-tdep.c: New file.
* riscv-tdep.h: New file.
* NEWS: Mention new target.
* MAINTAINERS: Add entry for riscv.
gdb/testsuite/ChangeLog:
* gdb.base/infcall-nested-structs.exp: New file.
* gdb.base/infcall-nested-structs.c: New file.
* gdb.base/float.exp: Add riscv support.
In some cases passing an argument to a function on amd64, or attempting
to fetch the return value, can trigger an assertion failure within GDB.
An example of a type that would trigger such an error is:
struct foo_t
{
long double a;
struct {
struct {
/* Empty. */
} es1;
} s1;
};
GCC does permit empty structures, so we should probably support this.
The test that exposes this bug is in the next commit along with the
RiscV support.
gdb/ChangeLog:
* amd64-tdep.c (amd64_classify_aggregate): Ignore zero sized
fields within aggregates.
Replace linear search with binary search on dynamic relocations. After
finding a match, scan backward to the first matching relocation, then
scan forward for a matching relocation with non-absolute symbol.
On Fedora 27 x86-64, time for "objdump -d" on libxul.so from RHEL 7.4
x86-64 went from
134.46user 0.12system 2:15.03elapsed
to
8.49user 0.14system 0:08.64elapsed
PR binutils/22911
* objdump.c (is_significant_symbol_name): Return TRUE for all
.plt* sections.
(find_symbol_for_address): Replace linear search with binary
search on dynamic relocations.
This function can take the flags as the gdb_disassembly_flags type
instead of int.
gdb/ChangeLog:
* record-btrace.c (btrace_print_lines): Change type of flags to
gdb_disassembly_flags.
Use the signal code from siginfo_t to distinguish SIGTRAP events due
to trace traps (TRAP_TRACE) and software breakpoints (TRAP_BRKPT).
For software breakpoints, adjust the PC when the event is reported as
part of the API when supplying "stopped_by_sw_breakpoint". Currently
FreeBSD only supports hardware watchpoints and breakpoints on x86
which are reported as trace traps. Signal information is not used on
MIPS and sparc64 kernels which do not reliably report TRAP_BRKPT for
software breakpoints.
gdb/ChangeLog:
* fbsd-nat.c: Include "inf-ptrace.h".
(USE_SIGTRAP_SIGINFO): Conditionally define.
[USE_SIGTRAP_SIGINFO] (fbsd_handle_debug_trap): New function.
(fbsd_wait) [USE_SIGTRAP_SIGINFO]: Call "fbsd_handle_debug_trap".
[USE_SIGTRAP_SIGINFO] (fbsd_stopped_by_sw_breakpoint): New
function.
[USE_SIGTRAP_SIGINFO] (fbsd_supports_stopped_by_sw_breakpoint):
Likewise.
[USE_SIGTRAP_SIGINFO] (fbsd_supports_stopped_by_hw_breakpoint):
Likewise.
(fbsd_nat_add_target) [USE_SIGTRAP_SIGINFO]: Set
"stopped_by_sw_breakpoint", "supports_stopped_by_sw_breakpoint",
"supports_stopped_by_hw_breakpoint" target methods.
For now this just logs information about the state of the current LWP
for each STOPPED event in fbsd_wait().
gdb/ChangeLog:
* NEWS (Changes since GDB 8.1): Add "set/show debug fbsd-nat".
* fbsd-nat.c (debug_fbsd_nat): New variable.
(show_fbsd_nat_debug): New function.
(fbsd_wait): Log LWP info if "debug_fbsd_nat" is enabled.
(_initialize_fbsd_nat): Add "fbsd-nat" debug boolean command.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging Output): Document "set/show debug
fbsd-nat".
Report that a thread is stopped by a hardware breakpoint if a non-data
watchpoint is set in DR6. This change should be a no-op since a target
still needs to implement the "to_supports_stopped_by_hw_breakpoint"
method before this function is used.
gdb/ChangeLog:
* nat/x86-dregs.c (x86_dr_stopped_by_hw_breakpoint): New function.
* nat/x86-dregs.h (x86_dr_stopped_by_hw_breakpoint): New
prototype.
* x86-nat.c (x86_stopped_by_hw_breakpoint): New function.
(x86_use_watchpoints): Set "stopped_by_hw_breakpoint" target
method.
