gdb/
* record.c: Include event-loop.h, inf-loop.h.
(record_beneath_to_async): New global.
(tmp_to_async): New global.
(record_async_inferior_event_token): New global.
(record_open_1): Don't error out if async is enabled.
(record_open): Handle to_async. Create an async event source in
the event loop.
(record_close): Delete the async event source.
(record_resumed): New global.
(record_execution_dir): New global.
(record_resume, record_core_resume): Set them. Register the
target on the event loop.
(record_wait): Rename to ...
(record_wait_1): ... this. Add more debug output. Handle
TARGET_WNOHANG, and the target beneath returning
TARGET_WAITKIND_IGNORE.
(record_wait): Reimplement on top of record_wait_1.
(record_async_mask_value): New global.
(record_async, record_async_mask, record_can_async_p)
(record_is_async_p, record_execution_direction): New functions.
(init_record_ops, init_record_core_ops): Install new methods.
* infrun.c (fetch_inferior_event): Temporarily switch the global
execution direction to the direction the target was going.
(execution_direction): Change type to int.
* target.c (default_execution_direction): New function.
(update_current_target): Inherit and de_fault
to_execution_direction.
* target.h (struct target_ops) <to_execution_direction>: New
field.
(target_execution_direction): New macro.
* inferior.h (execution_direction): Change type to int.
gdb/
* infcmd.c (finish_backward): Set a step-resume breakpoint at the
function's entry point instead of a manually managed momentary
breakpoint, and only ever issue one proceed call.
* infrun.c (handle_inferior_event) <BPSTAT_WHAT_STEP_RESUME>: If
doing a reverse-finish, switch to stepi mode, to do another step.
(insert_step_resume_breakpoint_at_sal): Make public.
(normal_stop): No need to save function value return registers if
going reverse.
* inferior.h (insert_step_resume_breakpoint_at_sal): Declare.
gdb/testsuite/
* gdb.reverse/finish-reverse-bkpt.exp: New test.
for ALPHA_ZERO_REGNUM.
(alpha_supply_int_regs): Explicitly supply zero as the value for
ALPHA_ZERO_REGNUM in the register cache.
* alpha-nat.c (fetch_osf_core_registers): Ditto.
gdb/
* breakpoint.c (watchpoint_check): If the watchpoint went out of
scope, clear its command list.
(map_breakpoint_numbers): Don't walk the related breakpoints list
of each breakpoint.
gdb/testsuite/
* gdb.base/commands.exp (watchpoint_command_test): Check that the
watchpoint's command list didn't execute when the watchpoint went
out of scope.
* symfile.h (enum dwarf2_section_enum): New type.
(dwarf2_get_section_info): New prototype.
* dwarf2read.c (dwarf2_get_section_info): Replace parameter
section_name by sect. Use a switch to select the info.
* dwarf2-frame.c (warf2_get_section_info): Remove prototype.
(dwarf2_build_frame_info): Adjust calls to dwarf2_get_section_info.
gdb/
* solib-svr4.c (svr4_solib_create_inferior_hook): Skip setting
shared library event breakpoint if there's no execution.
gdb/testsuite/
* gdb.trace/tfile.exp: Add test that opening the basic.tf trace
file doesn't error, using MI.
* c-lang.c (evaluate_subexp_c): Use expect_type if it is not
NULL.
gdb/testsuite
* gdb.base/charset.exp (string_display): Add tests to assign to
arrays.
* gdb.base/charset.c (short_array, int_array, long_array): New.
zero as the value for %g0 in the register cache.
* sparc-tdep.c (sparc32_supply_gregset): Likewise.
* sparc64-tdep.c (sparc64_supply_gregset): Likewise.
gdb/
* infcmd.c: Include "inf-loop.h".
(step_once): When stepping into an inline subroutine, pretend the
target has run. If the target can async, switch the inferior
event loop to INF_EXEC_COMPLETE.
* inferior.h (user_visible_resume_ptid): Declare.
* infrun.c (user_visible_resume_ptid): New function, factored out
from `resume'.
(resume): Use it.
* mi/mi-main.c (mi_execute_async_cli_command): Remove assertion
that the current thread is running. Merge async and sync
branches.
gdb/
* tracepoint.c: Include exceptions.h.
(TFILE_PID): Move higher in file.
(tfile_open): Delay pushing the tfile target until we're assured
the tfile header is present in the file. Wrap reading the initial
newline-terminated lines in TRY_CATCH. Pop the target if the
initial setup failed. Add the tfile's thread immediately
aftwards, before any non-essential setup. Don't skip
post_create_inferior if there are no traceframes present in the
file.
(tfile_close): Remove redundant check for null before xfree call.
(tfile_thread_alive): New function.
(init_tfile_ops): Register it as to_thread_alive callback.
quote pattern to avoid problems with Cygwin/mingw expect versions.
* gdb.base/default.exp (show convenience): Use double
quote pattern for regular expressions.
Fix -readnow for -gdwarf-4 unused type units.
* dwarf2read.c (struct signatured_type): Remove the field offset.
(create_signatured_type_table_from_index): Remove its initialization.
(create_debug_types_hash_table): Likewise. Initialize per_cu.offset
instead. Add a complaint call.
(process_psymtab_comp_unit): Change assignment to gdb_assert.
(process_type_comp_unit, lookup_die_type, dump_die_shallow)
(lookup_signatured_type_at_offset, read_signatured_type)
(write_one_signatured_type): Update the field for per_cu.
gdb/testsuite/
Fix -readnow for -gdwarf-4 unused type units.
* gdb.dwarf2/dw4-sig-type-unused.S: New file.
* gdb.dwarf2/dw4-sig-type-unused.exp: New file.
This is just a minor cleanup of an ARI violation. As this affects
code that is normally unreachable (you'd need a runtime where
the unit providing the exception hook has been compiled without
debugging information), I tested this manually by commenting out
the code just above, thus forcing this part of the code to be
exercised.
gdb/ChangeLog:
* ada-lang.c (print_it_exception): Avoid use of sprintf.
Tested on x86_64-linux.
gdb/
* infrun.c (resume): Mention which is the current thread, and its
current PC in debug output.
(prepare_to_proceed): Mention the thread switching in debug
output.
gdb/doc/
* gdb.texinfo (Remote Protocol) <Overview>: Mention vCont is
required for multi-threading support.
(Remote Protocol) <Packets>: Mention that 'c', 's', 'C', 'S' and
Hc are deprecated for multi-threading debugging. Point readers at
the vCont packet.
gdb/testsuite/
* gdb.ada/start.exp: Call untested with the correct test filename.
* gdb.arch/i386-bp_permanent.exp: Call untested with the correct
test filename. Make the test's binary unique.
* gdb.arch/i386-signal.exp: Call untested with the correct test
filename.
* gdb.arch/i386-size-overlap.exp: Ditto.
* gdb.arch/Makefile.in (EXECUTABLES): Update.
* gdb.base/gcore-buffer-overflow.exp: Ditto.
* gdb.cp/call-c.exp: Ditto.
* gdb.mi/mi-reverse.exp: Call untested with the correct test
filename. Make the test's binary unique.
* gdb.mi/Makefile.in (EXECUTABLES): Update.
* gdb.python/py-mi.exp: Ditto.
* gdb.python/Makefile.in (EXECUTABLES): Update.
* gdb.reverse/i386-precsave.exp: Ditto.
* gdb.reverse/i387-env-reverse.exp: Call untested with the correct
test filename.
* gdb.reverse/i387-stack-reverse.exp: Ditto.
* gdb.reverse/sigall-precsave.exp: Ditto. Make the test's binary
unique.
* gdb.reverse/sigall-reverse.exp: Call untested with the correct
test filename.
* gdb.reverse/Makefile.in (EXECUTABLES): Update.
* gdb.trace/tfile.exp: Ditto.
(try_thread_db_load_from_pdir): Call it. If unable to find
libthread_db in directory of libpthread, see if we're looking at
the separate-debug-info copy.
"No" for missing scripts.
(info_auto_load_scripts): Tweak "Loaded" column to fit "Missing".
doc/
* gdb.texinfo (Auto-loading): Document printing of missing scripts.
* NEWS: Mention $sdir,$pdir.
* gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): Add $sdir:$pdir.
* linux-thread-db.c (try_thread_db_load_from_pdir): New function.
(try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $pdir, $sdir. Remove trying of
system directories if search of libthread-db-search-path fails,
that is now done via $sdir.
(has_libpthread): New function.
(thread_db_load): Remove search for libthread_db in directory of
libpthread, that is now done via $pdir.
gdbserver/
* thread-db.c (try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $sdir, ignore $pdir.
Remove trying of system directories if search of
libthread-db-search-path fails, that is now done via $sdir.
doc/
* gdb.texinfo (Threads): Document $sdir,$pdir.
(Server): Document $pdir exception.
* python/py-auto-load.c (struct auto_load_pspace_info): New member
script_not_found_warning_printed.
(init_loaded_scripts_info): Renamed from create_loaded_scripts_hash,
all callers updated. Initialize script_not_found_warning_printed.
(get_auto_load_pspace_data_for_loading): New function.
(maybe_add_script): New function.
(source_section_scripts): Simplify. Only print one warning regardless
of the number of auto-load scripts not found.
(clear_section_scripts): Clear script_not_found_warning_printed.
(auto_load_objfile_script): Record script in hash table.
(count_matching_scripts): New function.
(maybe_print_script): Renamed from maybe_print_section_script, all
callers updated. Rewrite to use ui_out_*.
(info_auto_load_scripts): Renamed from
maintenance_print_section_scripts, all callers updated.
(gdbpy_initialize_auto_load): "maintenance print section-scripts"
renamed as "info auto-load-scripts".
doc/
* gdb.texinfo (Auto-loading): Document "info auto-load-scripts".
testsuite/
* gdb.python/py-objfile-script.exp: New file.
* gdb.python/py-objfile-script.c: New file.
* gdb.python/py-objfile-script-gdb.py: New file.
* testsuite/gdb.python/py-section-script.exp: Test
"info auto-load-scripts".
* gdb.dwarf2/watch-notconst.exp: Use is_x86_like_target.
* gdb.dwarf2/valop.exp: Use is_x86_like_target.
* gdb.dwarf2/typeddwarf.exp: Use is_x86_like_target. Pass
-nostdlib to compiler.
* gdb.dwarf2/typeddwarf.S (_start): Rename from 'main'.
* gdb.dwarf2/pieces.exp: Use is_x86_like_target.
* gdb.dwarf2/implptr.exp: Use is_x86_like_target.
* gdb.dwarf2/dw2-restore.exp: Check for LP64.
* gdb.dwarf2/callframecfa.exp: Use is_x86_like_target.
* mi/mi-main.c (mi_cmd_execute): Use cleanup from
prepare_execute_command.
* top.c (prepare_execute_command): Return cleanup.
(execute_command): Use cleanup from prepare_execute_command.
* top.h (prepare_execute_command): Change prototype to return
cleanup.
* defs.h (struct value): Add opaque declaration.
(make_cleanup_value_free_to_mark): Add prototype.
* utils.c (do_value_free_to_mark): New function.
(make_cleanup_value_free_to_mark): Likewise.
gdb/testsuite/
* gdb.python/py-function.exp: Test setting a value from a function
which executes a command.
experiment is still running.
gdb/
* breakpoint.c (disable_breakpoint): Disable all locations
associated with a tracepoint on target if a trace experiment is
running.
(disable_command): Disable a specific tracepoint location on target if
a trace experiment is running.
(do_enable_breakpoint): Enable all locations associated with a
tracepoint on target if a trace experiment is running.
(enable_command) Enable a specific tracepoint location on target if a
trace experiment is running.
* target.c (update_current_target): Add INHERIT and de_fault clauses for
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint.
* target.h: Add declaration of struct bp_location.
(struct target_ops): Add new functions
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint to target operations.
(target_supports_enable_disable_tracepoint): New macro.
(target_enable_tracepoint): New macro.
(target_disable_tracepoint): New macro.
* remote.c (struct remote_state): Add new field.
(remote_enable_disable_tracepoint_feature): New.
(remote_protocol_features): Add new entry.
(remote_supports_enable_disable_tracepoint): New.
(remote_enable_tracepoint): New.
(remote_disable_tracepoint): New.
(init_remote_ops): Add remote_enable_tracepoint,
remote_disable_tracepoint and remote_supports_enable_disable_tracepoint
to remote operations.
* tracepoint.c (start_tracing): Allow tracing to start without any
tracepoints enabled with just a warning if they can be re-enabled
later.
* NEWS: Add news item for the new behaviour of the enable and disable
GDB commands when applied to tracepoints.
Add news items for the new remote packets QTEnable and QTDisable.
gdb/doc/
* gdb.texinfo: Document change in the behaviour of the enable and
disable GDB commands when applied to tracepoints.
Document the EnableDisableTracepoints remote stub feature.
Document QTEnable and QTDisable in the list of tracepoint packets.
gdb/gdbserver/
* server.c (handle_query): Add EnableDisableTracepoints to the list
of supported features.
* tracepoint.c (clear_installed_tracepoints): Uninstall disabled
tracepoints.
(cmd_qtenable_disable): New.
(cmd_qtstart): Install tracepoints even if disabled.
(handle_tracepoint_general_set): Add call to cmd_qtenable_disable on
receiving a QTEnable or QTDisable packet.
(gdb_collect): Skip data collection if fast tracepoint is disabled.
(ust_marker_to_static_tracepoint): Do not ignore disabled static
tracepoints.
(gdb_probe): Skip data collection if static tracepoint is disabled.
Make addrs->SECTINDEX always defined.
* symfile.c (relative_addr_info_to_section_offsets): Check for
SECTINDEX -1, not for zero ADDR.
(addrs_section_compar): Remove checking for invalid SECTINDEX.
(addr_info_make_relative): Set SECTINDEX to -1 for unmatched entries.
* symfile.h (struct section_addr_info) <sectindex>: Update the comment
on its validity.
(_initialize_thread_db): Add setter for libthread-db-search-path.
gdbserver/
* thread-db.c (thread_db_handle_monitor_command): Handle elided path.
doc/
* gdb.texinfo (Threads): If an empty path is provided for
libthread-db-search-path it is reset to its default value.
(Server): Ditto.
* ppc-linux-tdep.c (ppu2spu_prev_register): Handle pseudo registers.
(ppu2spu_unwind_register): Mark pseudo registers unavailable.
* spu-tdep.c (op_selb): Use correct value.
testsuite/ChangeLog:
* gdb.cell/bt.exp: Delete breakpoints before running to signal
to avoid race condition.
* gdb.cell/coremaker.c: Use small stack size.
* gdb.cell/ea-standalone.exp: Use file name without path as
argument to c_to.
* gdb.cell/fork.exp: Allow other output when continuing to end.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Implement support for PowerPC BookE masked watchpoints.
gdb/
* NEWS: Mention masked watchpoint support. Create "Changed commands"
section.
* breakpoint.h (struct breakpoint_ops) <works_in_software_mode>: New
method. Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <hw_wp_mask>: New field.
* breakpoint.c (is_masked_watchpoint): Add prototype.
(update_watchpoint): Don't set b->val for masked watchpoints. Call
breakpoint's breakpoint_ops.works_in_software_mode if available.
(watchpoints_triggered): Handle the case of a hardware masked
watchpoint trigger.
(watchpoint_check): Likewise.
(works_in_software_mode_watchpoint): New function.
(insert_masked_watchpoint, remove_masked_watchpoint)
(resources_needed_masked_watchpoint)
(works_in_software_mode_masked_watchpoint, print_it_masked_watchpoint)
(print_one_detail_masked_watchpoint, print_mention_masked_watchpoint)
(print_recreate_masked_watchpoint, is_masked_watchpoint): New
functions.
(masked_watchpoint_breakpoint_ops): New structure.
(watch_command_1): Check for the existence of the `mask' parameter.
Set b->ops according to the type of hardware watchpoint being created.
* ppc-linux-nat.c (ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_masked_watch_num_registers): New functions.
(_initialize_ppc_linux_nat): Initialize to_insert_mask_watchpoint,
to_remove_mask_watchpoint and to_masked_watch_num_registers.
* target.c (update_current_target): Mention to_insert_mask_watchpoint,
to_remove_mask_watchpoint, and to_masked_watch_num_registers.
(target_insert_mask_watchpoint, target_remove_mask_watchpoint)
(target_masked_watch_num_registers): New functions.
* target.h (struct target_ops) <to_insert_mask_watchpoint>,
<to_remove_mask_watchpoint>, <to_masked_watch_num_registers>: New
methods.
(target_insert_mask_watchpoint, target_remove_mask_watchpoint)
(target_masked_watch_num_registers): Add prototypes.
gdb/doc/
* gdb.texinfo (Set Watchpoints): Document mask parameter.
(PowerPC Embedded): Mention support of masked watchpoints.
* gdb.threads/gcore-thread.exp (objfile, opts): New variables.
Try to compile the test using -Wl,-z,norelro first.
(load_core): New variable libthread_db_seen, initialize it.
(zeroed-threads cannot be listed): Protect it by XFAIL on
!$libthread_db_seen.
PR 12573
* dwarf2read.c (struct dwarf2_cu): New field has_loclist.
(producer_is_gcc_ge_4_0): New function.
(process_full_comp_unit): Set also symtab->locations_valid. Move the
symtab->language code.
(var_decode_location): Set cu->has_loclist.
* symtab.c (skip_prologue_sal): New variables saved_pc, force_skip and
skip. Intialize force_skip from locations_valid. Move the prologue
skipping code into two passes.
* symtab.h (struct symtab): Make the primary field a bitfield. New
field locations_valid.
gdb/testsuite/
PR 12573
* gdb.dwarf2/dw2-skip-prologue.S: New file.
* gdb.dwarf2/dw2-skip-prologue.c: New file.
* gdb.dwarf2/dw2-skip-prologue.exp: New file.
* c-exp.y (qualified_name): Call destructor_name_p with $1.type.
(classify_inner_name): Call cp_lookup_nested_type with
yylval.tsym.type.
* cp-namespace.c (cp_lookup_nested_type): New variable
saved_parent_type. Call CHECK_TYPEDEF for parent_type. Call
type_name_no_tag_or_error with saved_parent_type.
* dwarf2read.c (load_partial_dies): Read in any children of
DW_TAG_typedef with complaint in such case.
* gdbtypes.c (type_name_no_tag_or_error): New function.
* gdbtypes.h (type_name_no_tag_or_error): New prototype.
* valops.c (destructor_name_p): New comment for parameter type. Remove
type const. Make dname and cp const. Call type_name_no_tag_or_error.
* value.h (destructor_name_p): Remove type const.
Fix a race.
* gdb.cp/static-print-quit.exp (print c): Split to ...
(print c - <return>, print c - q <return>, print c - to quit):
... these. Make the testfile untested on gdb-7.1.
* breakpoint.c (update_watchpoint): Change between software and
hardware watchpoint for all kinds of watchpoints, not just
read/write ones. Determine b->exact value here instead of
in watch_command_1. Error out if there are not enough resources
for a read or access hardware watchpoint.
(watch_command_1): Remove logic of checking whether there are
enough resources available, since update_watchpoint will do that
work now. Don't set b->exact here. Catch exceptions thrown by
update_watchpoint and delete the watchpoint.
(can_use_hardware_watchpoint): Remove exact_watchpoints argument.
Use target_exact_watchpoints instead.
(delete_breakpoint): Notify observers only if deleted watchpoint
has a breakpoint number assigned to it.
* i386-tdep.c (i386_in_stack_tramp_p, i386_stack_tramp_frame_sniffer):
New functions.
(i386_stack_tramp_frame_unwind): New static global.
(i386_match_pattern): New function, extracted from i386_match_insn.
(i386_match_insn): Use i386_match_pattern.
(i386_match_insn_block): New function.
(i386_tramp_chain_in_reg_insns)
(i386_tramp_chain_on_stack_insns): New static variables.
(i386_gdbarch_init): Add i386_stack_tramp_frame_unwind to list
of unwinders.
It turns out that this change is not correct, and it causes a crash
on sparc-solaris while trying to load ld.so. This is because the
memory is actually still referenced after elf_symtab_read completes.
gdb/ChangeLog:
* elfread.c (elf_symtab_read): Revert the previous change
that tried to stop a memory leak.
@value{GDBN} should be used in place of GDB, so this patch fixes it.
gdb/doc/ChangeLog:
* gdb.texinfo (In Memoriam): Replace litteral uses of `GDB' with
`@value{GDBN}'.
This change removes the dedication of the manual to Fred Fish.
It also creates a new `In Memoriam' appendix, where Fred Fish
and Michael Snyder are mentioned.
gdb/doc/ChangeLog:
* gdb.texinfo (titlepage): Remove dedication.
(In Memoriam): New appendix.
PR testsuite/12649
Fix races.
* gdb.base/completion.exp: Remove all sleep calls. Remove
unnecessary regexs. Don't explicitly expect anything after the
prompt. Eat the prompt if necessary.
* valprint.c (val_print_array_elements): Fixed poor performance
of printing very large arrays with repeat_count_threshold set
to unlimited. New comment.
PR mi/12531
* varobj.c (install_default_visualizer): Do not install a
visualizer if the varobj is CPLUS_FAKE_CHILD.
(construct_visualizer): Likewise.
2011-04-29 Phil Muldoon <pmuldoon@redhat.com>
PR mi/12531
* gdb.python/py-mi.exp: Add CPLUS_FAKE_CHILD tests and a C++
compile target.
* gdb.python/py-prettyprint.exp: Add C++ object for
CPLUS_FAKE_CHILD test.
* infrun.c (proceed): Revert previous change.
(resume): Instead, handle the case of signal delivery while stepping
off a breakpoint location here, and only if software single-stepping
is used. Handle nested signals.
gdb/testsuite/
* gdb.base/signest.exp: New file.
* gdb.base/signest.c: Likewise.
* gdb.texinfo (Index Section Format): Change the version to 5.
Describe the different formula.
gdb/
Case insensitive lookups implementation.
* dwarf2read.c: Include ctype.h.
(struct mapped_index): New field version.
(mapped_index_string_hash): New parameter index_version. New comment
for it. Call tolower appropriately.
(find_slot_in_mapped_hash): New variable cmp, initialize it, use it.
Choose the right index version for mapped_index_string_hash.
(dwarf2_read_index): Support also the index version 5. Initialize the
new struct mapped_index field version.
(hash_strtab_entry): Pass INT_MAX for the new parameter, explain why.
(find_slot): Explain the version needs. Pass INT_MAX for the new
parameter.
(write_psymtabs_to_index): Produce version 5.
* minsyms.c (lookup_minimal_symbol): New variable cmp, initialize it,
use it. New comment for SYMBOL_MATCHES_SEARCH_NAME.
* psymtab.c (lookup_partial_symbol): Find the
SYMBOL_MATCHES_SEARCH_NAME start of the found block of matching
entries.
* symtab.c (lookup_symbol_in_language): Remove the case_sensitive_off
NAME lowercasing.
(search_symbols): Pass REG_ICASE to regcomp for case_sensitive_off.
(completion_list_add_name): New variable ncmp, initialize it, use it.
* symtab.h (SYMBOL_HASH_NEXT): Always call tolower.
* utils.c (strcmp_iw): Support case_sensitive_off.
(strcmp_iw_ordered): Sort in a way compatible with case_sensitive_off.
New function comment part. New variables saved_string1,
saved_string2 and case_pass. Add a proper second pass.
gdb/testsuite/
* gdb.base/fortran-sym-case.c: New file.
* gdb.base/fortran-sym-case.exp: New file.
* gdb.dwarf2/dw2-case-insensitive-debug.S: New file.
* gdb.dwarf2/dw2-case-insensitive.c: New file.
* gdb.dwarf2/dw2-case-insensitive.exp: New file.
Replace re_comp/re_exec by regcomp/regexec.
* symtab.c (struct search_symbols_data): New fields preg, preg_p.
(search_symbols_name_matches): Use them, use regexec.
(search_symbols): New variable retval_chain, adjust the use of
old_chain against it. Replace re_comp by regcomp. Use the new struct
search_symbols_data fields, use regexec instead of re_exec.
Format the code for the next patch.
* dwarf2read.c (struct mapped_index): Include delimiting newlines.
* utils.c (strcmp_iw_ordered): Reformat the code for the next patch.
New variables c1 and c2.
* lib/gdb.exp (gdb_test_multiple): Eror on newline in $message.
* gdb.base/ifelse.exp: Give names to the "" tests as `if true else
false #1', `if true else false #2' and `if true else false #3'.
* infrun.c (proceed): Do not single-step into signal delivery
when stepping off a breakpoint location.
(insert_step_resume_breakpoint_at_frame): Move prototype earlier.
(insert_step_resume_breakpoint_at_caller): Likewise.
(insert_step_resume_breakpoint_at_sal): Likewise.
(insert_longjmp_resume_breakpoint): Likewise.
testsuite/ChangeLog:
* gdb.base/annota1.exp: Accept breakpoints-invalid annotation
while delivering signal.
add to_pass_signals.
(target_notice_signals): Remove.
(target_pass_signals): Add prototype.
* target.c (update_current_target): Remove to_notice_signals;
mention to_pass_signals.
(target_pass_signals): New function.
(debug_to_notice_signals): Remove.
(setup_target_debug): Do not install debug_to_notice_signals.
* infrun.c (signal_pass): New global.
(resume): Call target_pass_signals.
(handle_inferior_event): Report all signals while stepping over
non-steppable watchpoint. Reset trap_expected to ensure breakpoints
are re-inserted when stepping over a signal handler.
(signal_cache_update): New function.
(signal_stop_update): Call it.
(signal_print_update): Likewise.
(signal_pass_update): Likewise.
(handle_command): Call signal_cache_update and target_pass_signals
instead of target_notice_signals.
(_initialize_infrun): Initialize signal_pass.
* linux-nat.c (pass_mask): New global.
(linux_nat_pass_signals): New function.
(linux_nat_create_inferior): Report all signals initially.
(linux_nat_attach): Likewise.
(linux_nat_resume): Use pass_mask to decide whether to directly
handle an inferior signal.
(linux_nat_wait_1): Likewise.
(linux_nat_add_target): Install to_pass_signals callback.
* nto-procfs.c (notice_signals): Remove.
(procfs_resume): Do not call notice_signals.
(procfs_notice_signals): Remove.
(procfs_pass_signals): New function.
(init_procfs_ops): Install to_pass_signals callback instead of
to_notice_signals callback.
(_initialize_procfs): Report all signals initially.
* procfs.c (procfs_notice_signals): Remove.
(procfs_pass_signals): New function.
(procfs_target): Install to_pass_signals callback instead of
to_notice_signals callback.
(register_gdb_signals): Remove.
(procfs_debug_inferior): Report all signals initially.
(procfs_init_inferior): Remove redundant register_gdb_signals call.
* remote.c (remote_pass_signals): Add numsigs and pass_signals
parameters; use them instead of calling signal_..._state routines.
(remote_notice_signals): Remove.
(remote_start_remote): Report all signals initially.
(remote_resume): Do not call remote_pass_signals.
(_initialize_remote): Install to_pass_signals callback instead of
to_notice_signals callback.
gdb/
* breakpoint.c (user_settable_breakpoint): Delete.
(user_breakpoint_p): Remove check on user_settable_breakpoint.
(delete_command): Check user_breakpoint_p instead of looking at
the breakpoint's type.
(disable_command): Ditto.
(enable_command): Ditto.
(delete_trace_command): Use user_breakpoint_p instead of looking
at the breakpoint number directly. When checking if there are
user visible tracepoints, in order to know whether to ask the user
for confirmation, check whether the breakpoint is actually a
tracepoint.
* linux-nat.c: Move common macros to ...
Include linux-ptrace.h.
* common/linux-ptrace.h: ... here. New.
gdb/gdbserver/
* linux-low.c: Move common macros to linux-ptrace.h.
Include linux-ptrace.h.
* Makefile.in (linux_ptrace_h): New.
(linux-low.o): Depends on linux-ptrace.h.
* elfread.c (elf_symfile_read): Protect dwarf2_initialize_objfile by
!objfile_has_partial_symbols. New comment.
* objfiles.c (objfile_has_partial_symbols): Call HAS_SYMBOLS if
SYM_READ_PSYMBOLS is not present. Extend the comment.
* symfile.h (struct sym_fns): Extend the sym_read_psymbols comment.
gdb/testsuite/
* gdb.base/gdbindex-stabs-dwarf.c: New file.
* gdb.base/gdbindex-stabs.c: New file.
* gdb.base/gdbindex-stabs.exp: New file.
* NEWS: Document the new gdbserver --once option.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): New anchor
for disconnected tracing.
(Multi-Process Mode for @code{gdbserver}): Mention --multi and
extended-remote relationship. Mention --once.
(TCP port allocation lifecycle of @code{gdbserver}): New.
gdb/gdbserver/
* remote-utils.c (handle_accept_event): Close LISTEN_DESC only if
RUN_ONCE. Comment for the LISTEN_DESC delete_file_handler call.
(remote_prepare): New function with most of the TCP code from ...
(remote_open): ... here. Detect PORT here unconditionally. Move also
setting transport_is_reliable.
* server.c (run_once): New variable.
(gdbserver_usage): Document it.
(main): Set run_once for `--once'. Call remote_prepare. Exit after
the first run if RUN_ONCE.
* server.h (run_once, remote_prepare): New declarations.
gdb/testsuite/
* gdb.base/solib-disc.exp: Set gdbserver_reconnect_p.
* lib/gdb.exp (gdb_init): Clear gdbserver_reconnect_p.
* lib/gdbserver-support.exp (gdbserver_start): Add `--once' if
!gdbserver_reconnect_p..
(gdbserver_reconnect): Call error if !gdbserver_reconnect_p..
(INTERMEDIATE_ENCODING): Change value to intermediate_encoding
function call if __STDC_ISO_10646__ macro is defined.
(intermediate_encoding): New prototype.
* charset.c (your_gdb_wchar_t_is_bogus): New extern test variable
to generate compile time error for unsupported gdb_wchar_t size.
(ENDIAN_SUFFIX): New macro.
(intermediate_encoding): New function.
* ada-lang.c (struct add_partial_datum): Update the comment for
expand_partial_symbol_name.
(ada_add_partial_symbol_completions): Rename to ...
(ada_expand_partial_symbol_name): ... here, change return type, update
function comment, call symbol_completion_match instead of
symbol_completion_add.
(ada_make_symbol_completion_list): Use now expand_partial_symbol_names
and ada_expand_partial_symbol_name.
* dwarf2read.c (dw2_expand_symtabs_matching): Support NULL
FILE_MATCHER.
(dw2_map_symbol_names): Remove.
(dwarf2_gdb_index_functions): Unlist dw2_map_symbol_names.
* psymtab.c (map_symbol_names_psymtab): Remove.
(expand_symtabs_matching_via_partial): Support NULL FILE_MATCHER.
Support KIND == ALL_DOMAIN. Exchange the NAME_MATCHER and KIND check
order.
(psym_functions): Unlist map_symbol_names_psymtab.
(map_partial_symbol_names): Rename to ...
(expand_partial_symbol_names): ... here, change the FUN type, call
expand_symtabs_matching with ALL_DOMAIN and NULL FILE_MATCHER now.
* psymtab.h (map_partial_symbol_names): Rename to ...
(expand_partial_symbol_names): ... here, change the FUN type.
* symfile.h (struct quick_symbol_functions): Update the description of
expand_symtabs_matching. Remove map_symbol_names.
* symtab.c (search_symbols): Add ALL_DOMAIN to the function comment.
(struct add_name_data): Update the comment for
expand_partial_symbol_name.
(add_partial_symbol_name): Rename to ...
(expand_partial_symbol_name): ... here. Replace
completion_list_add_name call by strncmp.
(default_make_symbol_completion_list_break_on): Use now
expand_partial_symbol_names and expand_partial_symbol_name.
* symtab.h (enum search_domain): New element ALL_DOMAIN.
gdb/testsuite/
* gdb.cp/cpcompletion.exp (complete class methods)
(complete class methods beginning with F): Move them above runto. New
comment about the runto delimiter.
* dwarf2read.c (save_gdb_index_command): Replace format
documentation with a pointer to the manual.
gdb/doc
* gdb.texinfo (Index Section Format): New node.
(Top): Add new node to menu.
gdb/
* regcache.c (get_thread_arch_regcache): If creating a regcache for
null_ptid, assume and allow a NULL address space, instead of
asking the target for the ptid's address space.
* infrun.c (ptid_is_pid): Remove assertion.
gdb/testsuite/
* gdb.base/maint.exp: Test that "maint print registers" works
without a running program.
* thread.c (any_live_thread_of_process): Prioritize threads
that are not executing.
* gdbthread.h (any_live_thread_of_process): Update comment
as per above change.
* nto-tdep.c (LM_ADDR): Rename to...
(lm_addr): New function name.
(nto_relocate_section_addresses): Adapt to change above.
* solib-sunos.c (LM_ADDR): Rename to...
(lm_addr): New function name.
(LM_NEXT): Rename to...
(lm_next): New function name.
(sunos_current_sos, sunos_relocate_section_addresses): Adapt to
function name changes above.
* solib-svr4.c (LM_ADDR_FROM_LINK_MAP): Rename to...
(lm_addr_from_link_map): New function name.
(HAS_LM_DYNAMIC_FROM_LINK_MAP): Rename to...
(has_lm_dynamic_from_link_map): New function name.
(LM_DYNAMIC_FROM_LINK_MAP): Rename to...
(lm_dynamic_from_link_map): New function name.
(LM_ADDR_CHECK): Rename to...
(lm_addr_check): New function name.
(LM_NEXT): Rename to...
(lm_next): New function name.
(LM_PREV): Rename to...
(lm_prev): New function name.
(LM_NAME): Rename to...
(lm_name): New function name.
(IGNORE_FIRST_LINK_MAP_ENTRY): Rename to...
(ignore_first_link_map_entry): New function name.
(svr4_keep_data_in_core): Adapt to function name changes above.
(svr4_current_sos): Likewise.
(enable_break): Likewise.
(svr4_relocate_section_addresses): Likewise.
* xtensa-tdep.c (xtensa_register_type): Use xstrprintf instead of
sprintf. Simplify code and avoid loosing memory.
(xtensa_register_reggroup_p): Extract assignment out of IF clause.
(call0_frame_cache): Remove && operator from end of line.
Fix libraries displacement if they change whether they were prelinked.
* solib-svr4.c (LM_ADDR_CHECK): Set L_ADDR even if the DYNAMIC pointer
does not match. Comment why.
gdb/testsuite/
* gdb.base/break-interp-lib.c (v, vptr): New variables.
* gdb.base/break-interp.exp (test_attach): New comment.
* corelow.c: Include wrapper.h.
(core_open): Call now gdb_target_find_new_threads.
* wrapper.c: Include target.h.
(gdb_target_find_new_threads): New.
* wrapper.h (gdb_target_find_new_threads): New declaration.
* linux-thread-db.c (find_new_threads_callback): Exit on zero TI_TID
even if !TARGET_HAS_EXECUTION.
gdb/testsuite/
* gdb.threads/gcore-thread.exp ($core0file): New variable.
(clear __stack_user.next, clear stack_used.next)
(save a zeroed-threads corefile): New test.
Call core_load for $core0file.
(zeroed-threads cannot be listed): New test.
* gdb.threads/gcore-thread.exp ($testfile): Match it the .exp
filename.
($srcfile): Preserve the original value.
($testfile): Match it the .exp filename.
($corefile): New variable. Substitute it around.
Use clean_restart.
($prev_timeout): Remove.
(load_core): Move core loading into this proc.
Fix restore of $timeout if load_core fails.
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Do not check for
SEC_LOAD.
gdb/
Fix convert_code_addr_to_desc_addr for ppc64 files after eu-strip.
* elfread.c (elf_symfile_read): New variable synth_abfd, pass it to
bfd_get_synthetic_symtab.
* jit.c (jit_register_code): Pass NULL to the new parameter parent.
* machoread.c (macho_add_oso_symfile): Pass main_objfile to the new
parameter parent, remove the call to add_separate_debug_objfile.
* solib.c (solib_read_symbols): Pass NULL to the new parameter parent.
* symfile-mem.c (symbol_file_add_from_memory): Likewise.
* symfile.c (symbol_file_add_with_addrs_or_offsets): New parameter
parent, new comment for it, call add_separate_debug_objfile for it.
(symbol_file_add_separate): Pass objfile as the parameter parent,
remove the call to add_separate_debug_objfile.
(symbol_file_add_from_bfd): New parameter parent, pass it.
(symbol_file_add): Pass NULL to the new parameter parent.
* symfile.h (symbol_file_add_from_bfd): New parameter parent.
gdb/testsuite/
* gdb.base/eu-strip-infcall.c: New file.
* gdb.base/eu-strip-infcall.exp: New file.
* elfread.c (elf_symtab_read): Do not ignore .L symbols if they are
BSF_SYNTHETIC.
gdb/testsuite/
* gdb.base/callfuncs.c (Lcallfunc, callfunc): New functions.
* gdb.base/callfuncs.exp (print callfunc (Lcallfunc, 5)): New test.
For now, only the sub-command name is completed. No support yet for
completing options to that command. But even this is a huge step as
currently, nothing is completed, and the basic "help sim" is fairly
obtuse as to what exactly the "sim" command accepts.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Code cleanup.
* symtab.c (search_symbols): Reorder the KIND description in the
function comment. Remove the unused 4th element of types, types2,
types3 and types4. New gdb_assert on KIND.
(symtab_symbol_info): Remove the unused 4th element of classnames.
New gdb_assert on KIND.
* symtab.h (enum search_domain): New warning in the enum comment.
Assign numbers to the elements VARIABLES_DOMAIN, FUNCTIONS_DOMAIN and
TYPES_DOMAIN.
Fix DW_AT_accessibility compatibility with gcc-4.6+.
* dwarf2read.c: Include ctype.h.
(producer_is_gxx_lt_4_6, dwarf2_default_access_attribute): New
functions.
(dwarf2_add_field): Fix new_field->accessibility by calling
dwarf2_default_access_attribute. Restructure setting accessibility
vs. virtuality.
(dwarf2_add_member_fn): New variable accessibility. Fix fnp
is_private and is_protected by calling
dwarf2_default_access_attribute.
* win32-low.c (win32_create_inferior): Use new cygwin_path_list
function to avoid warning.
(win32_add_one_solib): Use cygwin_conv_path function to avoid
warning.
* remote-fileio.c: Remove macros used to emulate new cygwin_conv_path
function on old Cygwin version.
* windows-nat.c: Remove cygwin version check and always define
__USEWIDE for Cygwin compilation.
Code cleanup.
* dictionary.c (dict_hash): Use SYMBOL_HASH_NEXT.
* dwarf2read.c (mapped_index_string_hash): Refer to SYMBOL_HASH_NEXT
in the function comment, a new note on values compatibility.
* minsyms.c (msymbol_hash_iw, msymbol_hash): Use SYMBOL_HASH_NEXT.
* symtab.h (SYMBOL_HASH_NEXT): New.
Marek Polacek
Pedro Alves
gdbadmin
Yao Qi
Tristan Gingold
Andreas Schwab
Keith Seitz
Tom Tromey
Pierre Muller
Thiago Jung Bauermann
Doug Evans
Jerome Guitton
Mark Kettenis
Luis Machado
Jan Kratochvil
Hui Zhu
Joel Brobecker
Kwok Yeung
Ulrich Weigand
Janis Johnson
Joseph Myers
Edjunior Barbosa Machado
Paul Pluzhnikov
Phil Muldoon
Nathan Froyd
Vladimir Prus
Eli Zaretskii
Jie Zhang
Marc Khouzam
Gary Benson
Mike Frysinger
Kevin Buettner
Steve Ellcey