Using the test program gdb.base/foll-fork.c, with follow-fork-mode set to
"child" and detach-on-fork set to "off", stepping or running past the fork
call results in the child process running to completion, when it should
just finish the single step. In addition, the breakpoint is not removed
from the parent process, so if it is resumed it receives a SIGTRAP.
Cause:
No matter what the setting for detach-on-fork, when stepping past a fork,
the single-step breakpoint (step_resume_breakpoint) is not handled
correctly in the parent. The SR breakpoint is cloned for the child
process, but before the clone is associated with the child it is treated as
a duplicate of the original, associated wth the parent. This results in
the insertion state of the original SR breakpoint and the clone being
"swapped" by breakpoint.c:update_global_location_list, so that the clone is
marked as inserted.
In the case where the parent is not detached, the two breakpoints remain in
that state. The breakpoint is never inserted in the child, because
although the cloned SR breakpoint is associated with the child, it is
marked as inserted. When the child is resumed, it runs to completion. The
breakpoint is never removed from the parent, so that if it is resumed after
the child exits, it gets a SIGTRAP.
Here is the sequence of events:
1) handle_inferior_event: FORK event is recognized.
2) handle_inferior_event: detach_breakpoints removes all breakpoints
from the child.
3) follow_fork: the parent SR breakpoint is cloned. Part of this procedure
is to call update_global_location_list, which swaps the insertion state of
the original and cloned SR breakpoints as part of ensuring that duplicate
breakpoints are only inserted once. At this point the original SR
breakpoint is not marked as inserted, and the clone is. The breakpoint is
actually inserted in the parent but not the child.
4) follow_fork: the original breakpoint is deleted by calling
delete_step_resume_breakpoint. Since the original is not marked as
inserted, the actual breakpoint remains in the parent process.
update_global_location_list is called again as part of the deletion. The
clone is still associated with the parent, but since it is marked as
enabled and inserted, the breakpoint is left in the parent.
5) follow_fork: if detach-on-fork is 'on', the actual breakpoint will be
removed from the parent in target_detach, based on the cloned breakpoint
still associated with the parent. Then the clone is no longer marked as
inserted. In follow_inferior_reset_breakpoints the clone is associated
with the child, and can be inserted.
If detach-on-fork is 'off', the actual breakpoint in the parent is never
removed (although the breakpoint had been deleted from the list). Since
the clone continues to be marked 'inserted', the SR breakpoint is never
inserted in the child.
Fix:
Set the cloned breakpoint as disabled from the moment it is created. This
is done by modifying clone_momentary_breakpoint to take an additional
argument, LOC_ENABLED, which is used as the value of the
bp_location->enabled member. The clone must be disabled at that point
because clone_momentary_breakpoint calls update_global_location_list, which
will swap treat the clone as a duplicate of the original breakpoint if it
is enabled.
All the calls to clone_momentary_breakpoint had to be modified to pass '1'
or '0'. I looked at implementing an enum for the enabled member, but
concluded that readability would suffer because there are so many places it
is used as a boolean, e.g. "if (bl->enabled)".
In follow_inferior_reset_breakpoints the clone is set to enabled once it
has been associated with the child process. With this, the bp_location
'inserted' member is maintained correctly throughout the follow-fork
procedure and the behavior is as expected.
The same treatment is given to the exception_resume_breakpoint when
following a fork.
Testing:
Ran 'make check' on Linux x64.
Along with the fix above, the coverage of the follow-fork test
gdb.base/foll-fork.exp was expanded to:
1) cover all the combinations of values for
follow-fork-mode and detach-on-fork
2) make sure that both user breakpoints and
single-step breakpoints are propagated
correctly to the child
3) check that the inferior list has the
expected contents after following the fork.
4) check that unfollowed, undetached inferiors
can be resumed.
gdb/
2014-06-18 Don Breazeal <donb@codesourcery.com>
* breakpoint.c (set_longjmp_breakpoint): Call
momentary_breakpoint_from_master with additional argument.
(set_longjmp_breakpoint_for_call_dummy): Call
momentary_breakpoint_from_master with additional argument.
(set_std_terminate_breakpoint): Call
momentary_breakpoint_from_master with additional argument.
(momentary_breakpoint_from_master): Add argument to function
definition and use it to initialize structure member flag.
(clone_momentary_breakpoint): Call
momentary_breakpoint_from_master with additional argument.
* infrun.c (follow_inferior_reset_breakpoints): Clear structure
member flags set in momentary_breakpoint_from_master.
gdb/testsuite/
2014-06-18 Don Breazeal <donb@codesourcery.com>
* gdb.base/foll-fork.exp (default_fork_parent_follow):
Deleted procedure.
(explicit_fork_parent_follow): Deleted procedure.
(explicit_fork_child_follow): Deleted procedure.
(test_follow_fork): New procedure.
(do_fork_tests): Replace calls to deleted procedures with
calls to test_follow_fork and reset GDB for subsequent
procedure calls.
This commit renames the functions that are to be shared.
Functions to be shared that were static are made nonstatic.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_show_dr): Renamed to
i386_dr_show and made nonstatic. All uses updated.
(i386_length_and_rw_bits): Renamed to
i386_dr_length_and_rw_bits and made nonstatic.
All uses updated.
(i386_insert_aligned_watchpoint): Renamed to
i386_dr_insert_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_remove_aligned_watchpoint): Renamed to
i386_dr_remove_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_update_inferior_debug_regs): Renamed to
i386_dr_update_inferior_debug_regs and made nonstatic.
All uses updated.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.h (i386_low_insert_watchpoint): Renamed to
i386_dr_insert_watchpoint.
(i386_low_remove_watchpoint): Renamed to
i386_dr_remove_watchpoint.
(i386_low_region_ok_for_watchpoint): Renamed to
i386_dr_region_ok_for_watchpoint.
(i386_low_stopped_data_address): Renamed to
i386_dr_stopped_data_address.
(i386_low_stopped_by_watchpoint): Renamed to
i386_dr_stopped_by_watchpoint.
* i386-low.c (i386_show_dr): Renamed to
i386_dr_show and made nonstatic. All uses updated.
(i386_length_and_rw_bits): Renamed to
i386_dr_length_and_rw_bits and made nonstatic.
All uses updated.
(i386_insert_aligned_watchpoint): Renamed to
i386_dr_insert_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_remove_aligned_watchpoint): Renamed to
i386_dr_remove_aligned_watchpoint and made nonstatic.
All uses updated.
(i386_update_inferior_debug_regs): Renamed to
i386_dr_update_inferior_debug_regs and made nonstatic.
All uses updated.
(i386_low_insert_watchpoint): Renamed to
i386_dr_insert_watchpoint. All uses updated.
(i386_low_remove_watchpoint): Renamed to
i386_dr_remove_watchpoint. All uses updated.
(i386_low_region_ok_for_watchpoint): Renamed to
i386_dr_region_ok_for_watchpoint. All uses updated.
(i386_low_stopped_data_address): Renamed to
i386_dr_stopped_data_address. All uses updated.
(i386_low_stopped_by_watchpoint): Renamed to
i386_dr_stopped_by_watchpoint. All uses updated.
This commit adds macros to abstract access to the i386_dr_low
function vector used by i386-nat.c. The macros are named so
as to match the names of the functions that do the same work
in gdbserver.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_dr_low_can_set_addr): New macro.
(i386_dr_low_can_set_control): Likewise.
(i386_dr_low_set_addr): Likewise.
(i386_dr_low_set_control): Likewise.
(i386_dr_low_get_addr): Likewise.
(i386_dr_low_get_status): Likewise.
(i386_dr_low_get_control): Likewise.
(i386_insert_aligned_watchpoint): Use new macros.
(i386_update_inferior_debug_regs): Likewise.
(i386_stopped_data_address): Likewise.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_dr_low_can_set_addr): New macro.
(i386_dr_low_can_set_control): Likewise.
(i386_insert_aligned_watchpoint): New check.
This commit synchronizes the i386_update_inferior_debug_regs functions
in i386-nat.c and i386-low.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_update_inferior_debug_regs) <state>:
New parameter. All uses updated.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_update_inferior_debug_regs) <inf_state>:
Renamed to state.
This commit renames maint_show_dr to debug_hw_points in i386-nat.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (maint_show_dr): Renamed to debug_hw_points.
All uses updated.
This commit makes all error handling in i386-low.c use internal_error
rather than fatal and error.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_length_and_rw_bits): Use internal_error
instead of fatal and error.
(i386_handle_nonaligned_watchpoint): Likewise.
This commit synchronizes the debug printing code in i386-nat.c and
i386-low.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (debug_printf): New macro.
(i386_get_debug_register_length): Likewise.
(TARGET_HAS_DR_LEN_8): Use above macro.
(i386_show_dr): Use debug_printf instead of puts_unfiltered
and printf_unfiltered. Use phex to format values.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c (i386_get_debug_register_length): New macro.
(TARGET_HAS_DR_LEN_8): Remove conditional. Use above macro.
(i386_show_dr): Use debug_printf instead of fprintf. Use
phex to format values.
This commit adds a const that was in i386-low.c but not in i386-nat.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c (i386_handle_nonaligned_watchpoint) <size_try_array>:
Make const.
This commit fixes various whitespace differences between i386-nat.c
and i386-low.c.
gdb/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-nat.c: Whitespace changes.
gdb/gdbserver/
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.c: Whitespace changes.
I happened to notice that savestring is still declared in utils.h,
despite the fact that it was moved to common/ a while back. This
patch removes the redundant declaration. Tested by rebuilding. I'm
committing this as obvious.
2014-06-17 Tom Tromey <tromey@redhat.com>
* utils.h (savestring): Remove declaration.
This replaces a function cast with a call to make_cleanup_freeargv.
I'm checking this in as obvious.
2014-06-17 Tom Tromey <tromey@redhat.com>
* remote.c (extended_remote_run): Use make_cleanup_freeargv.
We find the following fails in gdb test on mingw host.
FAIL: gdb.base/wchar.exp: print repeat
FAIL: gdb.base/wchar.exp: print repeat_p
FAIL: gdb.base/wchar.exp: print repeat (print null on)
FAIL: gdb.base/wchar.exp: print repeat (print elements 3)
FAIL: gdb.base/wchar.exp: print repeat_p (print elements 3)
print repeat^M
$7 = L"A", '¢' <repeats 21 times>, "B", '\000' <repeats 104 times>^M
(gdb) FAIL: gdb.base/wchar.exp: print repeat
the \242 is expected in the test but cent sign is displayed.
In valprint.c:print_wchar, wchar_printable is called to determine
whether a wchar is printable. wchar_printable calls iswprint but
the iswprint's return value depends on LC_CTYPE setting of locale [1, 2].
The output may vary with different locale settings and OS. IMO, '¢'
(cent sign) is a correct output on Windows.
[1] http://pubs.opengroup.org/onlinepubs/009604499/functions/iswprint.html
[2] http://msdn.microsoft.com/en-us/library/ewx8s4kw.aspx
This patch is set $cent to cent sign if the GDB is running on a
Windows host.
gdb/testsuite:
2014-06-17 Yao Qi <yao@codesourcery.com>
* gdb.base/wchar.exp: Set $cent to \u00A2 if "host-charset" is
CP1252.
skip_type_update_when_not_use_rtti_test) the testcase assumes an
uninitialized object has a specific type. In particular, 'ptr' and
's'.
In reality the compiler is free to do what it wants with that
uninitialized variable, even initialize it beforehand with the future
assignment's value. This is exactly what happens on some targets.
ptr should have type 'Base *', but it really has type 'Derived *'
because it is already initialized (earlier) by the compiler. The same
thing happens to 's'.
The following patch addresses this by explicitly initializing those
variables so the compiler doesn't optimize their assignments and GDB
can print their correct values.
2014-06-17 Luis Machado <lgustavo@codesourcery.com>
* gdb.mi/mi-var-rtti.cc (type_update_when_use_rtti_test):
Initialize ptr and S explicitly.
(skip_type_update_when_not_use_rtti_test): Likewise.
Add sp increment and decrement to ARMv8 IT block deprecate
pattern.
gas/
* config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
gas/testsuite/
* gas/arm/armv8-a-it-bad.s: New check for inc/dec sp.
* gas/arm/armv8-a-it-bad.l: Likewise.
If an MI client creates a varobj and attempts to update the root
/before/ the inferior is started, gdb will throw an internal error:
(gdb)
-var-create * - batch_flag
^done,name="var1",numchild="0",value="0",type="int",has_more="0"
(gdb)
-var-update var1
^done,changelist=[]
(gdb)
-var-update *
~"../../src/gdb/thread.c:628: internal-error: is_thread_state: Assertion `tp' failed.\nA problem internal to GDB has been detected,\nfurther debugging may prove unreliable.\nQuit this debugging session? "
~"(y or n) "
The function that handles the varobj update in the failing case,
mi_cmd_var_udpate_iter, checks if the thread/inferior is stopped before
attempting to update the varobj. It calls is_stopped (inferior_ptid)
which calls is_thread_state:
tp = find_thread_ptid (ptid);
gdb_assert (tp);
When there is no inferior, ptid is null_ptid, and find_thread_ptid (null_ptid)
returns NULL and the assertion is triggered.
This patch changes mi_cmd_var_update_iter to behave the same way
"-var-update var1" does: by calling the thread "stopped" if
there is no inferior (and thereby calling varobj_update_one).
ChangeLog
2014-06-16 Keith Seitz <keiths@redhat.com>
PR mi/15863
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Do not attempt
to update the varobj if inferior_ptid is null_ptid.
testsuite/ChangeLog
2014-06-16 Keith Seitz <keiths@redhat.com>
PR mi/15863
* gdb.mi/mi-var-cmd.exp: Add test for -var-update before
the inferior is started.
This makes a parameter of to_info_proc const and then fixes up some
fallout, including parameters in a couple of gdbarch methods.
I could not test the procfs.c change. I verified it by inspection.
If this causes an error here, it will be trivial to fix.
2014-06-16 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_info_proc>: Make parameter
const.
(target_info_proc): Update.
* target.c (target_info_proc): Make "args" const.
* procfs.c (procfs_info_proc): Update.
* linux-tdep.c (linux_info_proc): Update.
(linux_core_info_proc_mappings): Make "args" const.
(linux_core_info_proc): Update.
* gdbarch.sh (info_proc, core_info_proc): Make "args" const.
* gdbarch.c: Rebuild.
* gdbarch.h: Rebuild.
* corelow.c (core_info_proc): Update.
a syntax error is detected in an optional operand.
* config/tc-aarch64.c (END_OF_INSN): New macro.
(parse_operands): Handle operand given and be in wrong
format when operand is optional.
* gas/aarch64/diagnostic.s: New test patterns.
* gas/aarch64/diagnostic.l: Likewise.
Combining TLS descriptors and GNU indirect functions in the same
object could lead to assertions or multiple dynamic relocations
for the same GOT slot. Fix the bookkeeping so this doesn't happen.
This allows building and make checking glibc with -mtls-dialect=gnu2.
bfd/ChangeLog:
2014-06-16 Will Newton <will.newton@linaro.org>
* elf32-arm.c (elf32_arm_allocate_plt_entry): Increment
htab->next_tls_desc_index in the non-IPLT case.
Calculate GOT offset correctly for the non-IPLT case.
(allocate_dynrelocs_for_symbol): Don't increment
htab->next_tls_desc_index here.
ld/testsuite/ChangeLog:
2014-06-16 Will Newton <will.newton@linaro.org>
* ld-arm/arm-elf.exp: Add ifunc-gdesc test.
* ld-arm/ifunc-gdesc.r: New file.
* ld-arm/ifunc-gdesc.s: Likewise.
* ld-arm/ifunc-gdesc.ver: Likewise.
Turns out there's a difference between loading the program with "gdb
PROGRAM", vs loading it with "(gdb) file PROGRAM". The latter results
in the objfile ending up with OBJF_USERLOADED set, while not with the
former. (That difference seems bogus, but still that's not the point
of this patch. We can revisit that afterwards.)
The new code that suppresses breakpoint removal errors for
add-symbol-file objects ends up being too greedy:
/* In some cases, we might not be able to remove a breakpoint in
a shared library that has already been removed, but we have
not yet processed the shlib unload event. Similarly for an
unloaded add-symbol-file object - the user might not yet have
had the chance to remove-symbol-file it. shlib_disabled will
be set if the library/object has already been removed, but
the breakpoint hasn't been uninserted yet, e.g., after
"nosharedlibrary" or "remove-symbol-file" with breakpoints
always-inserted mode. */
if (val
&& (bl->loc_type == bp_loc_software_breakpoint
&& (bl->shlib_disabled
|| solib_name_from_address (bl->pspace, bl->address)
|| userloaded_objfile_contains_address_p (bl->pspace,
bl->address))))
val = 0;
as it turns out that OBJF_USERLOADED can be set for objfiles loaded by
some other means not add-symbol-file. In this case, symbol-file (or
"file", which is really just "exec-file"+"symbol-file").
Recall that add-symbol-file is documented as:
(gdb) help add-symbol-file
Load symbols from FILE, assuming FILE has been dynamically loaded.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
And it's the "dynamically loaded" aspect that the breakpoint.c code
cares about. So make add-symbol-file set OBJF_SHARED on its objfiles
too, and tweak the breakpoint.c code to look for OBJF_SHARED instead
of OBJF_USERLOADED.
This restores back the missing breakpoint removal warning when we let
sss-bp-on-user-bp-2.exp run on native GNU/Linux
(https://sourceware.org/ml/gdb-patches/2014-06/msg00335.html):
(gdb) PASS: gdb.base/sss-bp-on-user-bp-2.exp: define stepi_del_break
stepi_del_break
warning: Error removing breakpoint 3
(gdb) FAIL: gdb.base/sss-bp-on-user-bp-2.exp: stepi_del_break
I say "restores" because this was GDB's behavior in 7.7 and earlier.
And, likewise, "file" with no arguments only started turning
breakpoints set in the main executable to "<pending>" with the
remote-symbol-file patch (63644780). The old behavior is now
restored, and we break-unload-file.exp test now exercizes both "gdb;
file PROGRAM" and "gdb PROGRAM".
gdb/
2014-06-16 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location, remove_breakpoint_1): Adjust.
(disable_breakpoints_in_freed_objfile): Skip objfiles that don't
have OBJF_SHARED set.
* objfiles.c (userloaded_objfile_contains_address_p): Rename to...
(shared_objfile_contains_address_p): ... this. Check OBJF_SHARED
instead of OBJF_USERLOADED.
* objfiles.h (OBJF_SHARED): Update comment.
(userloaded_objfile_contains_address_p): Rename to ...
(shared_objfile_contains_address_p): ... this, and update
comments.
* symfile.c (add_symbol_file_command): Also set OBJF_SHARED in the
new objfile.
(remove_symbol_file_command): Skip objfiles that don't have
OBJF_SHARED set.
gdb/testsuite/
2014-06-16 Pedro Alves <palves@redhat.com>
* gdb.base/break-main-file-remove-fail.c: New file.
* gdb.base/break-main-file-remove-fail.exp: New file.
* gdb.base/break-unload-file.exp: Use build_executable instead of
prepare_for_testing.
(test_break): New parameter "initial_load". Handle it.
(top level): Add initial_load cmdline/file axis.
minsyms.h incorrectly claims that a couple of functions call
prim_record_minimal_symbol_full with COPY_NAME=0 -- but actually they
pass 1. Passing 1 is the correct behavior, so this patch fixes the
documentation.
I'm checking this in as obvious.
2014-06-16 Tom Tromey <tromey@redhat.com>
* minsyms.h (prim_record_minimal_symbol)
(prim_record_minimal_symbol_and_info): Update comments.
and fix more nds32 dependencies.
* scripttempl/elf.sc: Edit out __rela_iplt symbol assignments from
.rel sections, and __rel_iplt from .rela sections.
* scripttempl/nds32elf.sc: Likewise.
* Makefile.am (ends32*.c): Depend on nds32elf.sc.
* Makefile.in: Regenerate.
This is to fix unitialised memory access when printing listings.
Many targets don't initialise parts of insn frags or data frags that
have fixups, relying on md_apply_fix to finalise the frag. Which is
fine normally, but means we need to run write_object_file after
errors, for listings. Otherwise MALLOC_PERTURB_=1 causes errors like:
x86_64-linux +FAIL: i386 mpx-inval-1
x86_64-linux +FAIL: i386 inval-equ-1
x86_64-linux +FAIL: i386 x86-64-mpx-inval-1
Running write_object_file after errors requires some tweaking to the
testsuite, since we then get extra errors reported from md_apply_fix.
gas/
* write.h (subsegs_finish): Delete declaration.
* write.c (subsegs_finish): Make static.
(write_object_file): Call subsegs_finish from here. Don't print
warning and error count here..
* as.c (main): ..do so here instead. Remove dead code for "no
object file generated". Split out count strings to better support
internationalisation. Don't call subsegs_finish. Tidy setting of
"keep_it". Run write_object_file even after errors.
(keep_it): Make static.
* config/obj-elf.c (elf_frob_symbol): Remove assert.
(elf_frob_file_before_adjust): Likewise.
gas/testsuite/
* gas/elf/bad-group.s: Use %function.
* gas/elf/bad-group.err: Expect correct line number. Allow
other errors.
* gas/elf/bad-size.err: Allow other errors. Match expected
error somewhat more rigorously.
* gas/i386/reloc32.l: Allow other errors.
* gas/i386/mpx-inval-1.l: Match applied relocs.
* gas/i386/x86-64-mpx-inval-1.l: Likewise, and nop padding.
* gas/i386/x86-64-mpx-inval-2.l: Match nop padding, and allow
other errors.
* gas/macros/dot.s: Use .balign.
* gas/macros/dot.l: Update alignment output.
* gas/symver/symver6.l: Allow other errors.
In particular the_insn.reloc must be initialised, otherwise the early
exit cases for bad opcodes will result in cascading errors if
write_object_file is called after an error.
* config/tc-dlx.c (machine_ip): Move initialisation of the_insn
earlier.
MALLOC_PERTURB_=1 results in "FAIL: c54x macros".
* config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
end of archive to temp file.
(tic54x_start_line_hook): Start scan for parallel on next line,
not one char into next line (which may overrun the buffer).
MALLOC_PERTURB_=1 results in "FAIL: VAX ELF relocations", due to object
file being emitted with uninitialised fields. Since these fields had
RELA relocs the field value won't be used at final link time, so the
problem is only seen in relocatable object files.
This rewrite of md_apply_fix clears all fields with relocs, whereas
before some fields had non-zero values.
gas/
* config/tc-vax.c (md_apply_fix): Rewrite.
(tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
define rather than the equivalent BFD_RELOC_NONE.
gas/testsuite/
* gas/vax/elf-rel.d: Update.
Cures these failures with MALLOC_PERTURB_=1
FAIL: GOT test (executable)
FAIL: GOT test (shared library)
FAIL: VAX export class call relocation test
FAIL: VAX export class data relocation test
* elf32-vax.c (elf_vax_size_dynamic_sections): Clear linker
created sections.
MALLOC_PERTURB_=1 results in "FAIL: PIC" on arm-vxworks, due to garbage
in words with got relocs.
* config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
(md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
and BFD_RELOC_ARM_TLS* relocs. Simplify BFD_RELOC_8 case.
gas/
* config/tc-cris.c (md_create_long_jump): Follow "short" jump
with a nop rather than leaving uninitialised.
gas/testsuite/
* gas/cris/rd-bkw4v32.d: Update.