I went through most of the spots that include readline.h and, when
appropriate, either removed the include or changed it to include
tilde.h.
Note that remote-sim.c and bsd-kvm.c could probably include tilde.h
instead, but I did not change these. I think I can't build the
latter, and I didn't want to set up a sim build for the former.
Tested by rebuilding.
gdb/ChangeLog
2019-11-06 Tom Tromey <tom@tromey.com>
* tui/tui-interp.c: Don't include readline.h.
* tui/tui-hooks.c: Don't include readline.h.
* symmisc.c: Include tilde.h, not readline.h.
* symfile.c: Include tilde.h, not readline.h.
* source.c: Include tilde.h, not readline.h.
* solib.c: Include tilde.h, not readline.h.
* psymtab.c: Include tilde.h, not readline.h.
* exec.c: Include tilde.h, not readline.h.
* corelow.c: Include tilde.h, not readline.h.
* cli/cli-dump.c: Include tilde.h, not readline.h.
* cli/cli-cmds.c: Don't include readline.h.
Change-Id: I60487a190c43128b800ef77517d1ab42957571d7
In ELF, if a data symbol is defined in a shared library and used by
the main program, it will be subject to a "copy relocation". In this
scenario, the main program has a copy of the symbol in question, and a
relocation that tells ld.so to copy the data from the shared library.
Then the symbol in the main program is used to satisfy all references.
This patch changes gdb to handle this scenario. Data symbols coming
from ELF shared libraries get a special flag that indicates that the
symbol's address may be subject to copy relocation.
I looked briefly into handling copy relocations by looking at the
actual relocations in the main program, but this seemed difficult to
do with BFD.
Note that no caching is done here. Perhaps this could be changed if
need be; I wanted to avoid possible problems with either objfile
lifetimes and changes, or conflicts with the long-term (vapor-ware)
objfile splitting project.
gdb/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* symmisc.c (dump_msymbols): Don't use MSYMBOL_VALUE_ADDRESS.
* ada-lang.c (lesseq_defined_than): Handle
LOC_STATIC.
* dwarf2read.c (dwarf2_per_objfile): Add can_copy
parameter.
(dwarf2_has_info): Likewise.
(new_symbol): Set maybe_copied on symbol when
appropriate.
* dwarf2read.h (dwarf2_per_objfile): Add can_copy
parameter.
<can_copy>: New member.
* elfread.c (record_minimal_symbol): Set maybe_copied
on symbol when appropriate.
(elf_symfile_read): Update call to dwarf2_has_info.
* minsyms.c (lookup_minimal_symbol_linkage): New
function.
* minsyms.h (lookup_minimal_symbol_linkage): Declare.
* symtab.c (get_symbol_address, get_msymbol_address):
New functions.
* symtab.h (get_symbol_address, get_msymbol_address):
Declare.
(SYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_ADDRESS): Handle
maybe_copied.
(struct symbol, struct minimal_symbol) <maybe_copied>:
New member.
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
This series is revisit of Siddhesh Poyarekar's patch from back in
2012. The last status on the patch is in the following gdb-patches
thread:
https://sourceware.org/ml/gdb-patches/2012-08/msg00562.html
It appears that Tom approved the patch, but Jan had some issues
with a compiler error that made the test fail on -m32 test runs.
He wrote up a hand-tweaked .S file to deal with it. Siddesh said
he would update tests. Then nothing.
Siddesh and Jan have both moved on since.
The patch originally required a large precursor patch to work.
I have whittled this down to/rewritten the bare minimum, and this
first patch is the result, changing the type of TYPE_LENGTH
to ULONGEST from unsigned int.
The majority of the changes involve changing printf format
strings to use %s and pulongest instead of %d.
gdb/ChangeLog:
* ada-lang.c (ada_template_to_fixed_record_type_1): Use
%s/pulongest for TYPE_LENGTH instead of %d in format
strings.
* ada-typerint.c (ada_print_type): Likewise.
* amd64-windows-tdep.c (amd64_windows_store_arg_in_reg): Likewise.
* compile/compile-c-support.c (generate_register_struct): Likewise.
* gdbtypes.c (recursive_dump_type): Likewise.
* gdbtypes.h (struct type) <length>: Change type to ULONGEST.
* m2-typeprint.c (m2_array): Use %s/pulongest for TYPE_LENGTH
instead of %d in format strings.
* riscv-tdep.c (riscv_type_alignment): Cast second argument
to std::min to ULONGEST.
* symmisc.c (print_symbol): Use %s/pulongest for TYPE_LENGTH
instead of %d in format strings.
* tracepoint.c (info_scope_command): Likewise.
* typeprint.c (print_offset_data::update)
(print_offset_data::finish): Likewise.
* xtensa-tdep.c (xtensa_store_return_value)
(xtensa_push_dummy_call): Likewise.
I noticed that there are still many places referring to non-const
blocks. This constifies all the remaining ones that I found that
could be constified.
In a few spots, this search found unused variables or fields. I
removed these. I've also removed some unnecessary casts to
"struct block *".
gdb/ChangeLog
2019-03-24 Tom Tromey <tom@tromey.com>
* c-exp.y (typebase): Remove casts.
* gdbtypes.c (lookup_unsigned_typename, )
(lookup_signed_typename): Remove cast.
* eval.c (parse_to_comma_and_eval): Remove cast.
* parse.c (write_dollar_variable): Remove cast.
* block.h (struct block) <superblock>: Now const.
* symfile-debug.c (debug_qf_map_matching_symbols): Update.
* psymtab.c (psym_map_matching_symbols): Make "block" const.
(map_block): Make "block" const.
* symfile.h (struct quick_symbol_functions)
<map_matching_symbols>: Constify block argument to "callback".
* symtab.c (basic_lookup_transparent_type_quick): Make "block"
const.
(find_pc_sect_compunit_symtab): Make "b" const.
(find_symbol_at_address): Likewise.
(search_symbols): Likewise.
* dwarf2read.c (dw2_lookup_symbol): Make "block" const.
(dw2_debug_names_lookup_symbol): Likewise.
(dw2_map_matching_symbols): Update.
* p-valprint.c (pascal_val_print): Remove "block".
* ada-lang.c (ada_add_global_exceptions): Make "b" const.
(aux_add_nonlocal_symbols): Make "block" const.
(resolve_subexp): Remove cast.
* linespec.c (iterate_over_all_matching_symtabs): Make "block"
const.
(iterate_over_file_blocks): Likewise.
* f-exp.y (%union) <bval>: Remove.
* coffread.c (patch_opaque_types): Make "b" const.
* spu-tdep.c (spu_catch_start): Make "block" const.
* c-valprint.c (print_unpacked_pointer): Remove "block".
* symmisc.c (dump_symtab_1): Make "b" const.
(block_depth): Make "block" const.
* d-exp.y (%union) <bval>: Remove.
* cp-support.h (cp_lookup_rtti_type): Update.
* cp-support.c (cp_lookup_rtti_type): Make "block" const.
* psymtab.c (psym_lookup_symbol): Make "block" const.
(maintenance_check_psymtabs): Make "b" const.
* python/py-framefilter.c (extract_sym): Make "sym_block" const.
(enumerate_locals, enumerate_args): Update.
* python/py-symtab.c (stpy_global_block): Make "block" const.
(stpy_static_block): Likewise.
* inline-frame.c (block_starting_point_at): Make "new_block"
const.
* block.c (find_block_in_blockvector): Make return type const.
(blockvector_for_pc_sect): Make "b" const.
(find_block_in_blockvector): Make "b" const.
I found a couple of spots that manually saved and restored the current
language. This patch changes them to use
scoped_restore_current_language.
Tested by the buildbot.
gdb/ChangeLog
2019-03-23 Tom Tromey <tom@tromey.com>
* linespec.c (get_current_search_block): Use
scoped_restore_current_language.
* symmisc.c (dump_symtab): Use scoped_restore_current_language.
This patch builds on the previous by enabling the `new' multidictionary
API. A lot of the hunks are simply textual replacements of "dict_"
with "mdict_" and similar transformations.
A word of warning, even with the use of multidictionaries, the code
still does not satisfactorily fix the reported problems with gdb/23712
(or gdb/23010). We still have additional changes to make before that
happens.
gdb/ChangeLog:
PR gdb/23712
PR symtab/23010
* dictionary.h (struct dictionary): Replace declaration with
multidictionary.
(dict_create_hashed, dict_create_hashed_expandable)
(dict_create_linear, dict_create_linear_expandable)
(dict_free, dict_add_symbol, dict_add_pending, dict_empty)
(dict_iterator_first, dict_iterator_next, dict_iter_match_first)
(dict_iter_match_next, dict_size): Rename to "mdict_" versions
taking multidictionary argument.
[ALL_DICT_SYMBOLS]: Update for multidictionary.
* block.h (struct block) <dict>: Change to multidictionary
and rename `multidict'.
* block.c, buildsym.c, jit.c, mdebugread.c, objfiles.c,
symmisc.c: Update all dictionary references to multidictionary.
This introduces a new psymtab_storage class, which holds all
psymbol-related objects that are independent of the objfile. (This
latter contraint explains why psymbol_map was not moved; though this
could still be done with some work.)
This patch does not yet change where psymtab allocation is done --
that comes later. This just wraps everything in a single object to
make further transformations simpler.
Note that a shared_ptr is used to link from the objfile to the
psymtab_storage object. The end goal here is to allow a given symbol
reader to simply attach to the psymtab_storage object to the BFD, then
reuse it in later invocations; shared_ptr makes this simple to reason
about.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* symmisc.c (print_symbol_bcache_statistics): Update.
(print_objfile_statistics): Update.
* symfile.c (reread_symbols): Update.
* psymtab.h (class psymtab_storage): New.
* psymtab.c (psymtab_storage): New constructor.
(~psymtab_storage): New destructor.
(require_partial_symbols): Update.
(ALL_OBJFILE_PSYMTABS_REQUIRED): Rewrite.
(find_pc_sect_psymtab, find_pc_sect_psymbol)
(match_partial_symbol, lookup_partial_symbol, dump_psymtab)
(psym_dump, recursively_search_psymtabs, psym_has_symbols)
(psym_find_compunit_symtab_by_address, sort_pst_symbols)
(start_psymtab_common, end_psymtab_common)
(add_psymbol_to_bcache, add_psymbol_to_list, init_psymbol_list)
(allocate_psymtab): Update.
(psymtab_storage::discard_psymtab): Rename from discard_psymtab.
Update.
(dump_psymtab_addrmap, maintenance_print_psymbols)
(maintenance_check_psymtabs): Update.
(class objfile_psymtabs): Move to objfiles.h.
* psympriv.h (discard_psymtab): Now inline.
(psymtab_discarder::psymtab_discarder): Update.
(psymtab_discarder::~psymtab_discarder): Update.
(ALL_OBJFILE_PSYMTABS): Rewrite.
* objfiles.h (struct objfile) <psymtabs, psymtabs_addrmap,
free_psymtabs, psymbol_cache, global_psymbols, static_psymbols>:
Remove fields.
<partial_symtabs>: New field.
(class objfile_psymtabs): Move from psymtab.h. Update.
* objfiles.c (objfile::objfile): Initialize partial_symtabs, not
psymbol_cache.
(objfile::~objfile): Don't destroy psymbol_cache.
* mdebugread.c (parse_partial_symbols): Update.
* dwarf2read.c (create_addrmap_from_index)
(create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab)
(process_psymtab_comp_unit_reader, dwarf2_build_psymtabs_hard)
(add_partial_subprogram, dwarf2_ranges_read): Update.
* dwarf-index-write.c (write_address_map)
(write_one_signatured_type, recursively_write_psymbols)
(class debug_names, class debug_names, write_psymtabs_to_index):
Update.
This removes ALL_OBJFILE_FILETABS, replacing its uses with ranged for
loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symmisc.c (print_objfile_statistics, dump_objfile)
(maintenance_print_symbols): Use compunit_filetabs.
* source.c (forget_cached_source_info_for_objfile): Use
compunit_filetabs.
* objfiles.h (ALL_OBJFILE_FILETABS): Remove.
(ALL_FILETABS): Use compunit_filetabs.
* objfiles.c (objfile_relocate1): Use compunit_filetabs.
* coffread.c (coff_symtab_read): Use compunit_filetabs.
This removes ALL_COMPUNIT_FILETABS, replacing its uses with ranged for
loops.
Because this is still used in the ALL_OBJFILE_FILETABS macro, in some
places a declaration had to be removed or renamed to avoid shadowing.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.h (ALL_COMPUNIT_FILETABS): Remove.
(compunit_filetabs): New.
* symtab.c (iterate_over_some_symtabs, find_pc_sect_line): Use
compunit_filetabs.
(info_sources_command, make_source_files_completion_list): Remove
declaration.
* symmisc.c (print_objfile_statistics, dump_objfile)
(maintenance_print_symbols): Remove declaration.
(maintenance_info_symtabs): Use compunit_filetabs.
(maintenance_info_line_tables): Likewise.
* source.c (select_source_symtab): Change local variable name.
(forget_cached_source_info_for_objfile): Remove declaration.
* objfiles.h (ALL_OBJFILE_FILETABS): Use compunit_filetabs.
* objfiles.c (objfile_relocate1): Remove declaration.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Remove
declaration.
* maint.c (count_symtabs_and_blocks): Use compunit_filetabs.
* coffread.c (coff_symtab_read): Remove declaration.
* buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use
compunit_filetabs.
This removes the ALL_MSYMBOLS and ALL_OBJFILE_MSYMBOLS macros,
replacing their uses with ranged for loops.
In a couple of spots, a new declaration was needed in order to work
around shadowing; these are just temporary and are removed in a
subsequent patch.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (search_symbols)
(default_collect_symbol_completion_matches_break_on): Use
objfile_msymbols.
* ada-lang.c (ada_lookup_simple_minsym)
(ada_collect_symbol_completion_matches): Use objfile_msymbols.
* minsyms.c (find_solib_trampoline_target): Use objfile_msymbols.
* hppa-tdep.c (hppa_lookup_stub_minimal_symbol): Use
objfile_msymbols.
* coffread.c (coff_symfile_read): Use objfile_msymbols.
* symmisc.c (dump_msymbols): Use objfile_msymbols.
* objc-lang.c (find_methods): Use objfile_msymbols.
(info_selectors_command, info_classes_command): Likewise.
* stabsread.c (scan_file_globals): Use objfile_msymbols.
* objfiles.h (class objfile_msymbols): New.
(ALL_OBJFILE_MSYMBOLS): Remove.
(ALL_MSYMBOLS): Remove.
This removes most uses of ALL_OBJFILES, replacing them with ranged for
loops. The remaining uses are all in macros, and will be removed in
subsequent patches.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (iterate_over_symtabs, matching_obj_sections)
(expand_symtab_containing_pc, lookup_static_symbol)
(basic_lookup_transparent_type, find_pc_sect_compunit_symtab)
(find_symbol_at_address, find_line_symtab, find_main_name): Use
all_objfiles.
* probe.c (find_probe_by_pc, collect_probes): Use all_objfiles.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Use all_objfiles.
* linux-thread-db.c (try_thread_db_load_from_pdir)
(has_libpthread): Use all_objfiles.
* ada-lang.c (add_nonlocal_symbols): Use all_objfiles.
* linespec.c (iterate_over_all_matching_symtabs)
(search_minsyms_for_name): Use all_objfiles.
* maint.c (maintenance_info_sections): Use all_objfiles.
* main.c (captured_main_1): Use all_objfiles.
* spu-tdep.c (spu_objfile_from_frame): Use all_objfiles.
* guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles.
* guile/scm-pretty-print.c
(ppscm_find_pretty_printer_from_objfiles): Use all_objfiles.
* solib-spu.c (append_ocl_sos): Use all_objfiles.
* symmisc.c (maintenance_print_symbols): Use all_objfiles.
(maintenance_print_msymbols): Use all_objfiles.
* source.c (select_source_symtab): Use all_objfiles.
* jit.c (jit_find_objf_with_entry_addr): Use all_objfiles.
* symfile.c (remove_symbol_file_command)
(expand_symtabs_matching, map_symbol_filenames): Use
all_objfiles.
* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use
all_objfiles.
* dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles.
* objc-lang.c (find_methods): Use all_objfiles.
* objfiles.c (have_partial_symbols, have_full_symbols)
(have_minimal_symbols, qsort_cmp)
(default_iterate_over_objfiles_in_search_order): Use
all_objfiles.
* hppa-tdep.c (find_unwind_entry): Use all_objfiles.
* psymtab.c (maintenance_print_psymbols): Use all_objfiles.
(maintenance_check_psymtabs): Use all_objfiles.
(ALL_PSYMTABS): Remove.
* compile/compile-object-run.c (do_module_cleanup): Use
all_objfiles.
* blockframe.c (find_pc_partial_function): Use all_objfiles.
* cp-support.c (add_symbol_overload_list_qualified): Use
all_objfiles.
* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
Use all_objfiles.
* dwarf-index-write.c (save_gdb_index_command): Use all_objfiles.
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use
all_objfiles.
* python/py-objfile.c (objfpy_lookup_objfile_by_name)
(objfpy_lookup_objfile_by_build_id): Use all_objfiles.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
Uses all_objfiles.
* solib.c (solib_read_symbols): Use all_objfiles
This removes the ALL_PSPACE_OBJFILES macro in favor of ranged for
loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* probe.c (parse_probes_in_pspace): Use all_objfiles.
* guile/scm-progspace.c (gdbscm_progspace_objfiles): Use
all_objfiles.
* objfiles.h (ALL_PSPACE_OBJFILES): Remove.
* symmisc.c (print_symbol_bcache_statistics)
(print_objfile_statistics, maintenance_print_objfiles)
(maintenance_info_symtabs, maintenance_check_symtabs)
(maintenance_expand_symtabs, maintenance_info_line_tables): Use
all_objfiles.
* source.c (forget_cached_source_info): Use all_objfiles.
* symfile-debug.c (set_debug_symfile): Use all_objfiles.
* elfread.c (elf_gnu_ifunc_resolve_by_cache)
(elf_gnu_ifunc_resolve_by_got): Use all_objfiles.
* objfiles.c (update_section_map): Use all_objfiles.
(shared_objfile_contains_address_p): Likewise.
* psymtab.c (maintenance_info_psymtabs): Use all_objfiles.
* python/py-progspace.c (pspy_get_objfiles): Use all_objfiles.
I noticed a few places where a Usage line in gdb did not use upper
case for metasyntactic variables. This patch fixes all the instances
I found.
Tested on x86-64 Fedora 28.
gdb/ChangeLog
2019-01-04 Tom Tromey <tom@tromey.com>
* compile/compile.c (_initialize_compile): Use upper case for
metasyntactic variables.
* symmisc.c (_initialize_symmisc): Use upper case for
metasyntactic variables.
* psymtab.c (_initialize_psymtab): Use upper case for
metasyntactic variables.
* demangle.c (demangle_command): Use upper case for metasyntactic
variables.
(_initialize_demangler): Likewise.
* ax-gdb.c (_initialize_ax_gdb): Use upper case for metasyntactic
variables.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
TYPE_TAG_NAME has been an occasional source of confusion and bugs. It
seems to me that it is only useful for C and C++ -- but even there,
not so much, because at least with DWARF there doesn't seem to be any
way to wind up with a type where the name and the tag name are both
non-NULL and different.
So, this patch removes TYPE_TAG_NAME entirely. This should save a
little memory, but more importantly, it simplifies this part of gdb.
A few minor test suite adjustments were needed. In some situations
the new code does not yield identical output to the old code.
gdb/ChangeLog
2018-06-01 Tom Tromey <tom@tromey.com>
* valops.c (enum_constant_from_type, value_namespace_elt)
(value_maybe_namespace_elt): Update.
* valarith.c (find_size_for_pointer_math): Update.
* target-descriptions.c (make_gdb_type): Update.
* symmisc.c (print_symbol): Update.
* stabsread.c (define_symbol, read_type)
(complain_about_struct_wipeout, add_undefined_type)
(cleanup_undefined_types_1): Update.
* rust-lang.c (rust_tuple_type_p, rust_slice_type_p)
(rust_range_type_p, val_print_struct, rust_print_struct_def)
(rust_internal_print_type, rust_composite_type)
(rust_evaluate_funcall, rust_evaluate_subexp)
(rust_inclusive_range_type_p): Update.
* python/py-type.c (typy_get_tag): Update.
* p-typeprint.c (pascal_type_print_base): Update.
* mdebugread.c (parse_symbol, parse_type): Update.
* m2-typeprint.c (m2_long_set, m2_record_fields, m2_enum):
Update.
* guile/scm-type.c (gdbscm_type_tag): Update.
* go-lang.c (sixg_string_p): Update.
* gnu-v3-abi.c (build_gdb_vtable_type, build_std_type_info_type):
Update.
* gdbtypes.h (struct main_type) <tag_name>: Remove.
(TYPE_TAG_NAME): Remove.
* gdbtypes.c (type_name_no_tag): Simplify.
(check_typedef, check_types_equal, recursive_dump_type)
(copy_type_recursive, arch_composite_type): Update.
* f-typeprint.c (f_type_print_base): Update. Print "Type" prefix
in summary mode when needed.
* eval.c (evaluate_funcall): Update.
* dwarf2read.c (fixup_go_packaging, read_structure_type)
(process_structure_scope, read_enumeration_type)
(read_namespace_type, read_module_type, determine_prefix): Update.
* cp-support.c (inspect_type): Update.
* coffread.c (process_coff_symbol, decode_base_type): Update.
* c-varobj.c (c_is_path_expr_parent): Update.
* c-typeprint.c (c_type_print_base_struct_union): Update.
(c_type_print_base_1): Update. Print struct/class/union/enum in
summary when using C language.
* ax-gdb.c (gen_struct_ref, gen_namespace_elt)
(gen_maybe_namespace_elt): Update.
* ada-lang.c (ada_type_name): Simplify.
(empty_record, ada_template_to_fixed_record_type_1)
(template_to_static_fixed_type)
(to_record_with_fixed_variant_part, ada_check_typedef): Update.
gdb/testsuite/ChangeLog
2018-06-01 Tom Tromey <tom@tromey.com>
* gdb.xml/tdesc-regs.exp (load_description): Update expected
results.
* gdb.dwarf2/method-ptr.exp: Set language to C++.
* gdb.dwarf2/member-ptr-forwardref.exp: Set language to C++.
* gdb.cp/typeid.exp (do_typeid_tests): Update type_re.
* gdb.base/maint.exp (maint_pass_if): Update.
Running the new tests added later in the series on PPC64 (ELFv1)
revealed that the current ifunc support needs a bit of a design rework
to work properly on PPC64/ELFv1, as most of the new tests fail. The
ifunc support only kind of works today if the ifunc symbol and the
resolver have the same name, as is currently tested by the
gdb.base/gnu-ifunc.exp testcase, which is unlike how ifuncs are
written nowadays.
The crux of the problem is that ifunc symbols are really function
descriptors, not text symbols:
44: 0000000000020060 104 FUNC GLOBAL DEFAULT 18 gnu_ifunc_resolver
54: 0000000000020060 104 GNU_IFUNC GLOBAL DEFAULT 18 gnu_ifunc
But, currently GDB only knows about ifunc symbols that are text
symbols. GDB's support happens to work in practice for PPC64 when the
ifunc and resolver are one and only, like in the current
gdb.base/gnu-ifunc.exp testcase:
15: 0000000000020060 104 GNU_IFUNC GLOBAL DEFAULT 18 gnu_ifunc
because in that case, the synthetic ".gnu_ifunc" entry point text
symbol that bfd creates from the actual GNU ifunc "gnu_ifunc" function
(descriptor) symbol ends up with the the "is a gnu ifunc" flag set /
copied over:
(gdb) maint print msymbols
...
[ 8] i 0x9c4 .gnu_ifunc section .text <<< mst_text_gnu_ifunc
...
[29] D 0x20060 gnu_ifunc section .opd crtstuff.c <<< mst_data
But, if the resolver gets a distinct symbol/name from the ifunc
symbol, then we end up with this:
(gdb) maint print msymbols
[ 8] T 0x9e4 .gnu_ifunc_resolver section .text <<< mst_text
...
[29] D 0x20060 gnu_ifunc section .opd crtstuff.c <<< mst_data
[30] D 0x20060 gnu_ifunc_resolver section .opd crtstuff.c <<< mst_data
I have a follow up bfd patch that turns that into:
(gdb) maint print msymbols
+ [ 8] i 0x9e4 .gnu_ifunc section .text <<< mst_text_gnu_ifunc
[ 8] T 0x9e4 .gnu_ifunc_resolver section .text <<< mst_text
...
[29] D 0x20060 gnu_ifunc section .opd crtstuff.c
[30] D 0x20060 gnu_ifunc_resolver section .opd crtstuff.c
but that won't help everything. We still need this patch.
Specifically, when we do a symbol lookup by name, like e.g., to call a
function (see c-exp.y hunk), e.g., "p gnu_ifunc()", then we need to
know that the found "gnu_ifunc" minimal symbol is an ifunc in order to
do some special processing. But, on PPC, that lookup by name finds
the function descriptor symbol, which presently is just a mst_data
symbol, while at present, we look for mst_text_gnu_ifunc symbols to
decide whether to do special GNU ifunc processing. In most of those
places, we could try to resolve the function descriptor with
gdbarch_convert_from_func_ptr_addr, and then lookup the minimal symbol
at the resolved PC, see if that finds a minimal symbol of type
mst_text_gnu_ifunc. If so, then we could assume that the original
mst_dadta / function descriptor "gnu_ifunc" symbol was an ifunc. I
tried it, and it mostly works, even if it's not the most efficient.
However, there's one case that can't work with such a design -- it's
that of the user calling the ifunc resolver directly to debug it, like
"p gnu_ifunc_resolver(0)", expecting that to return the function
pointer of the final function (which is exercised by the new tests
added later). In this case, with the not-fully-working solution, we'd
resolve the function descriptor, find that there's an
mst_text_gnu_ifunc symbol for the resolved address, and proceed
calling the function as if we tried to call "gnu_ifunc", the
user-visible GNU ifunc symbol, instead of the resolver. I.e., it'd be
impossible to call the resolver directly as a normal function.
Introducing mst_data_gnu_ifunc eliminates the need for several
gdbarch_convert_from_func_ptr_addr calls, and, fixes the "call
resolver directly" use case mentioned above too. It's the cleanest
approach I could think of.
In sum, we make GNU ifunc function descriptor symbols get a new
"mst_data_gnu_ifunc" minimal symbol type instead of the bare mst_data
type. So when symbol lookup by name finds such a minimal symbol, we
know we found an ifunc symbol, without resolving the entry/text
symbol. If the user calls the the resolver symbol instead, like "p
gnu_ifunc_resolver(0)", then we'll find the regular mst_data symbol
for "gnu_ifunc_resolver", and we'll call the resolver function as just
another regular function.
With this, most of the GNU ifunc tests added by a later patch pass on
PPC64 too. The following bfd patch fixes the remaining issues.
gdb/ChangeLog:
2018-04-26 Pedro Alves <palves@redhat.com>
* breakpoint.c (set_breakpoint_location_function): Handle
mst_data_gnu_ifunc.
* c-exp.y (variable production): Handle mst_data_gnu_ifunc.
* elfread.c (elf_symtab_read): Give data symbols with
BSF_GNU_INDIRECT_FUNCTION set mst_data_gnu_ifunc type.
(elf_rel_plt_read): Update comment.
* linespec.c (convert_linespec_to_sals): Handle
mst_data_gnu_ifunc.
(minsym_found): Handle mst_data_gnu_ifunc.
* minsyms.c (msymbol_is_function, minimal_symbol_reader::record)
(find_solib_trampoline_target): Handle mst_data_gnu_ifunc.
* parse.c (find_minsym_type_and_address): Handle
mst_data_gnu_ifunc.
* symmisc.c (dump_msymbols): Handle mst_data_gnu_ifunc.
* symtab.c (find_gnu_ifunc): Handle mst_data_gnu_ifunc.
* symtab.h (minimal_symbol_type) <mst_text_gnu_ifunc>: Update
comment.
<mst_data_gnu_ifunc>: New enumerator.
Summary:
- This is preparation for supporting wild name matching on C++ too.
- This is also preparation for TAB-completion fixes.
- Makes symbol name matching (think strcmp_iw) be based on a per-language method.
- Merges completion and non-completion name comparison (think
language_ops::la_get_symbol_name_cmp generalized).
- Avoid re-hashing lookup name multiple times
- Centralizes preparing a name for lookup (Ada name encoding / C++ Demangling),
both completion and non-completion.
- Fixes Ada latent bug with verbatim name matches in expressions
- Makes ada-lang.c use common|symtab.c completion code a bit more.
Ada's wild matching basically means that
"(gdb) break foo"
will find all methods named "foo" in all packages. Translating to
C++, it's roughly the same as saying that "break klass::method" sets
breakpoints on all "klass::method" methods of all classes, no matter
the namespace. A following patch will teach GDB about fullname vs
wild matching for C++ too. This patch is preparatory work to get
there.
Another idea here is to do symbol name matching based on the symbol
language's algorithm. I.e., avoid dependency on current language set.
This allows for example doing
(gdb) b foo::bar< int > (<tab>
and having gdb name match the C++ symbols correctly even if the
current language is C or Assembly (or Rust, or Ada, or ...), which can
easily happen if you step into an Assembly/C runtime library frame.
By encapsulating all the information related to a lookup name in a
class, we can also cache hash computation for a given language in the
lookup name object, to avoid recomputing it over and over.
Similarly, because we don't really know upfront which languages the
lookup name will be matched against, for each language we store the
lookup name transformed into a search name. E.g., for C++, that means
demangling the name. But for Ada, it means encoding the name. This
actually forces us to centralize all the different lookup name
encoding in a central place, resulting in clearer code, IMO. See
e.g., the new ada_lookup_name_info class.
The lookup name -> symbol search name computation is also done only
once per language.
The old language->la_get_symbol_name_cmp / symbol_name_cmp_ftype are
generalized to work with both completion, and normal symbol look up.
At some point early on, I had separate completion vs non-completion
language vector entry points, but a single method ends up being better
IMO for simplifying things -- the more we merge the completion /
non-completion name lookup code paths, the less changes for bugs
causing completion vs normal lookup finding different symbols.
The ada-lex.l change is necessary because when doing
(gdb) p <UpperCase>
then the name that is passed to write_ write_var_or_type ->
ada_lookup_symbol_list misses the "<>", i.e., it's just "UpperCase",
and we end up doing a wild match against "UpperCase" lowercased by
ada_lookup_name_info's constructor. I.e., "uppercase" wouldn't ever
match "UpperCase", and the symbol lookup fails.
This wouldn't cause any regression in the testsuite, but I added a new
test that would pass before the patch and fail after, if it weren't
for that fix.
This is latent bug that happens to go unnoticed because that
particular path was inconsistent with the rest of Ada symbol lookup by
not lowercasing the lookup name.
Ada's symbol_completion_add is deleted, replaced by using common
code's completion_list_add_name. To make the latter work for Ada, we
needed to add a new output parameter, because Ada wants to return back
a custom completion candidates that are not the symbol name.
With this patch, minimal symbol demangled name hashing is made
consistent with regular symbol hashing. I.e., it now goes via the
language vector's search_name_hash method too, as I had suggested in a
previous patch.
dw2_expand_symtabs_matching / .gdb_index symbol names were a
challenge. The problem is that we have no way to telling what is the
language of each symbol name found in the index, until we expand the
corresponding full symbol, which is off course what we're trying to
avoid. Language information is simply not considered in the index
format... Since the symbol name hashing and comparison routines are
per-language, we now have a problem. The patch sorts this out by
matching each name against all languages. This is inneficient, and
indeed slows down completion several times. E.g., with:
$ cat script.cmd
set pagination off
set $count = 0
while $count < 400
complete b string_prin
printf "count = %d\n", $count
set $count = $count + 1
end
$ time gdb --batch -q ./gdb-with-index -ex "source script-string_printf.cmd"
I get, before patch (-O2, x86-64):
real 0m1.773s
user 0m1.737s
sys 0m0.040s
While after patch (-O2, x86-64):
real 0m9.843s
user 0m9.482s
sys 0m0.034s
However, the following patch will optimize this, and will actually
make this use case faster compared to the "before patch" above:
real 0m1.321s
user 0m1.285s
sys 0m0.039s
gdb/ChangeLog:
2017-11-08 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_encode): Rename to ..
(ada_encode_1): ... this. Add throw_errors parameter and handle
it.
(ada_encode): Reimplement.
(match_name): Delete, folded into full_name.
(resolve_subexp): No longer pass the encoded name to
ada_lookup_symbol_list.
(should_use_wild_match): Delete.
(name_match_type_from_name): New.
(ada_lookup_simple_minsym): Use lookup_name_info and the
language's symbol_name_matcher_ftype.
(add_symbols_from_enclosing_procs, ada_add_local_symbols)
(ada_add_block_renamings): Adjust to use lookup_name_info.
(ada_lookup_name): New.
(add_nonlocal_symbols, ada_add_all_symbols)
(ada_lookup_symbol_list_worker, ada_lookup_symbol_list)
(ada_iterate_over_symbols): Adjust to use lookup_name_info.
(ada_name_for_lookup): Delete.
(ada_lookup_encoded_symbol): Construct a verbatim name.
(wild_match): Reverse sense of return type. Use bool.
(full_match): Reverse sense of return type. Inline bits of old
match_name here.
(ada_add_block_symbols): Adjust to use lookup_name_info.
(symbol_completion_match): Delete, folded into...
(ada_lookup_name_info::matches): ... .this new method.
(symbol_completion_add): Delete.
(ada_collect_symbol_completion_matches): Add name_match_type
parameter. Adjust to use lookup_name_info and
completion_list_add_name.
(get_var_value, ada_add_global_exceptions): Adjust to use
lookup_name_info.
(ada_get_symbol_name_cmp): Delete.
(do_wild_match, do_full_match): New functions.
(ada_lookup_name_info::ada_lookup_name_info): New method.
(ada_symbol_name_matches, ada_get_symbol_name_matcher): New
functions.
(ada_language_defn): Install ada_get_symbol_name_matcher.
* ada-lex.l (processId): If name starts with '<', copy it
verbatim.
* block.c (block_iter_match_step, block_iter_match_first)
(block_iter_match_next, block_lookup_symbol)
(block_lookup_symbol_primary, block_find_symbol): Adjust to use
lookup_name_info.
* block.h (block_iter_match_first, block_iter_match_next)
(ALL_BLOCK_SYMBOLS_WITH_NAME): Adjust to use lookup_name_info.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Adjust comments to
refer to la_get_symbol_name_matcher.
* completer.c (complete_files_symbols)
(collect_explicit_location_matches, symbol_completer): Pass a
symbol_name_match_type down.
* completer.h (class completion_match, completion_match_result):
New classes.
(completion_tracker::reset_completion_match_result): New method.
(completion_tracker::m_completion_match_result): New field.
* cp-support.c (make_symbol_overload_list_block): Adjust to use
lookup_name_info.
(cp_fq_symbol_name_matches, cp_get_symbol_name_matcher): New
functions.
* cp-support.h (cp_get_symbol_name_matcher): New declaration.
* d-lang.c: Adjust comments to refer to
la_get_symbol_name_matcher.
* dictionary.c (dict_vector) <iter_match_first, iter_match_next>:
Adjust to use lookup_name_info.
(dict_iter_match_first, dict_iter_match_next)
(iter_match_first_hashed, iter_match_next_hashed)
(iter_match_first_linear, iter_match_next_linear): Adjust to work
with a lookup_name_info.
* dictionary.h (dict_iter_match_first, dict_iter_match_next):
Likewise.
* dwarf2read.c (dw2_lookup_symbol): Adjust to use lookup_name_info.
(dw2_map_matching_symbols): Adjust to use symbol_name_match_type.
(gdb_index_symbol_name_matcher): New class.
(dw2_expand_symtabs_matching) Adjust to use lookup_name_info and
gdb_index_symbol_name_matcher. Accept a NULL symbol_matcher.
* f-lang.c (f_collect_symbol_completion_matches): Adjust to work
with a symbol_name_match_type.
(f_language_defn): Adjust comments to refer to
la_get_symbol_name_matcher.
* go-lang.c (go_language_defn): Adjust comments to refer to
la_get_symbol_name_matcher.
* language.c (default_symbol_name_matcher)
(language_get_symbol_name_matcher): New functions.
(unknown_language_defn, auto_language_defn): Adjust comments to
refer to la_get_symbol_name_matcher.
* language.h (symbol_name_cmp_ftype): Delete.
(language_defn) <la_collect_symbol_completion_matches>: Add match
type parameter.
<la_get_symbol_name_cmp>: Delete field.
<la_get_symbol_name_matcher>: New field.
<la_iterate_over_symbols>: Adjust to use lookup_name_info.
(default_symbol_name_matcher, language_get_symbol_name_matcher):
Declare.
* linespec.c (iterate_over_all_matching_symtabs)
(iterate_over_file_blocks): Adjust to use lookup_name_info.
(find_methods): Add language parameter, and use lookup_name_info
and the language's symbol_name_matcher_ftype.
(linespec_complete_function): Adjust.
(lookup_prefix_sym): Use lookup_name_info.
(add_all_symbol_names_from_pspace): Adjust.
(find_superclass_methods): Add language parameter and pass it
down.
(find_method): Pass symbol language down.
(find_linespec_symbols): Don't demangle or Ada encode here.
(search_minsyms_for_name): Add lookup_name_info parameter.
(add_matching_symbols_to_info): Add name_match_type parameter.
Use lookup_name_info.
* m2-lang.c (m2_language_defn): Adjust comments to refer to
la_get_symbol_name_matcher.
* minsyms.c: Include <algorithm>.
(add_minsym_to_demangled_hash_table): Remove table parameter and
add objfile parameter. Use search_name_hash, and add language to
demangled languages vector.
(struct found_minimal_symbols): New struct.
(lookup_minimal_symbol_mangled, lookup_minimal_symbol_demangled):
New functions.
(lookup_minimal_symbol): Adjust to use them. Don't canonicalize
input names here. Use lookup_name_info instead. Lookup up
demangled names once for each language in the demangled names
vector.
(iterate_over_minimal_symbols): Use lookup_name_info. Lookup up
demangled names once for each language in the demangled names
vector.
(build_minimal_symbol_hash_tables): Adjust.
* minsyms.h (iterate_over_minimal_symbols): Adjust to pass down a
lookup_name_info.
* objc-lang.c (objc_language_defn): Adjust comment to refer to
la_get_symbol_name_matcher.
* objfiles.h: Include <vector>.
(objfile_per_bfd_storage) <demangled_hash_languages>: New field.
* opencl-lang.c (opencl_language_defn): Adjust comment to refer to
la_get_symbol_name_matcher.
* p-lang.c (pascal_language_defn): Adjust comment to refer to
la_get_symbol_name_matcher.
* psymtab.c (psym_lookup_symbol): Use lookup_name_info.
(match_partial_symbol): Use symbol_name_match_type,
lookup_name_info and psymbol_name_matches.
(lookup_partial_symbol): Use lookup_name_info.
(map_block): Use symbol_name_match_type and lookup_name_info.
(psym_map_matching_symbols): Use symbol_name_match_type.
(psymbol_name_matches): New.
(recursively_search_psymtabs): Use lookup_name_info and
psymbol_name_matches. Rename 'kind' parameter to 'domain'.
(psym_expand_symtabs_matching): Use lookup_name_info. Rename
'kind' parameter to 'domain'.
* rust-lang.c (rust_language_defn): Adjust comment to refer to
la_get_symbol_name_matcher.
* symfile-debug.c (debug_qf_map_matching_symbols)
(debug_qf_map_matching_symbols): Use symbol_name_match_type.
(debug_qf_expand_symtabs_matching): Use lookup_name_info.
* symfile.c (expand_symtabs_matching): Use lookup_name_info.
* symfile.h (quick_symbol_functions) <map_matching_symbols>:
Adjust to use symbol_name_match_type.
<expand_symtabs_matching>: Adjust to use lookup_name_info.
(expand_symtabs_matching): Adjust to use lookup_name_info.
* symmisc.c (maintenance_expand_symtabs): Use
lookup_name_info::match_any ().
* symtab.c (symbol_matches_search_name): New.
(eq_symbol_entry): Adjust to use lookup_name_info and the
language's matcher.
(demangle_for_lookup_info::demangle_for_lookup_info): New.
(lookup_name_info::match_any): New.
(iterate_over_symbols, search_symbols): Use lookup_name_info.
(compare_symbol_name): Add language, lookup_name_info and
completion_match_result parameters, and use them.
(completion_list_add_name): Make extern. Add language and
lookup_name_info parameters. Use them.
(completion_list_add_symbol, completion_list_add_msymbol)
(completion_list_objc_symbol): Add lookup_name_info parameters and
adjust. Pass down language.
(completion_list_add_fields): Add lookup_name_info parameters and
adjust. Pass down language.
(add_symtab_completions): Add lookup_name_info parameters and
adjust.
(default_collect_symbol_completion_matches_break_on): Add
name_match_type parameter, and use it. Use lookup_name_info.
(default_collect_symbol_completion_matches)
(collect_symbol_completion_matches): Add name_match_type
parameter, and pass it down.
(collect_symbol_completion_matches_type): Adjust.
(collect_file_symbol_completion_matches): Add name_match_type
parameter, and use lookup_name_info.
* symtab.h: Include <string> and "common/gdb_optional.h".
(enum class symbol_name_match_type): New.
(class ada_lookup_name_info): New.
(struct demangle_for_lookup_info): New.
(class lookup_name_info): New.
(symbol_name_matcher_ftype): New.
(SYMBOL_MATCHES_SEARCH_NAME): Use symbol_matches_search_name.
(symbol_matches_search_name): Declare.
(MSYMBOL_MATCHES_SEARCH_NAME): Delete.
(default_collect_symbol_completion_matches)
(collect_symbol_completion_matches)
(collect_file_symbol_completion_matches): Add name_match_type
parameter.
(iterate_over_symbols): Use lookup_name_info.
(completion_list_add_name): Declare.
* utils.c (enum class strncmp_iw_mode): Moved to utils.h.
(strncmp_iw_with_mode): Now extern.
* utils.h (enum class strncmp_iw_mode): Moved from utils.c.
(strncmp_iw_with_mode): Declare.
gdb/testsuite/ChangeLog:
2017-11-08 Pedro Alves <palves@redhat.com>
* gdb.ada/complete.exp (p <Exported_Capitalized>): New test.
(p Exported_Capitalized): New test.
(p exported_capitalized): New test.
If you want to use catch_errors with a function with parameters, then
currently you have to manually write a "capture" struct wrapping the
arguments and marshall/unmarshall that.
https://sourceware.org/ml/gdb-patches/2017-09/msg00834.html proposed
adjusting catch_errors to use gdb::function_view, which would allow
passing lambdas with automatic captures. However, it seems like using
TRY/CATCH directly instead ends up producing clearer and easier to
debug code. This is what this commit does.
Note that removing catch_errors exposes further cleanup opportunities
around no longer having to follow catch_errors callback type, and also
removes a few cleanups.
I didn't do anything to save/restore current_uiout because I think
that should be the responsibility of the code that changes
current_uiout in the first place.
(Another approach could be to make catch_errors a variadic template
like:
template<typename Function, typename... Args>
int catch_errors (const char *errstring, return_mask mask,
Function &&func, Args... args);
and then with:
extern void function_with_args (int, int);
extern void function_with_no_args ();
calls to the above functions would be wrapped like this:
catch_errors ("some error happened", RETURN_MASK_ERROR,
function_with_args, arg1, arg2);
catch_errors ("some error happened", RETURN_MASK_ERROR,
function_with_no_args);
but I'm thinking that that doesn't improve much if at all either.)
gdb/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* breakpoint.c (breakpoint_cond_eval): Change return type to bool
and reverse logic.
(WP_DELETED, WP_VALUE_CHANGED, WP_VALUE_NOT_CHANGED, WP_IGNORE):
No longer macros. Instead ...
(enum wp_check_result): They're now values of this new
enumeration.
(watchpoint_check): Change return type to wp_check_result and
parameter type to bpstat.
(bpstat_check_watchpoint): Use TRY/CATCH instead of catch_errors.
(bpstat_check_breakpoint_conditions): Use TRY/CATCH instead of
catch_errors. Reverse logic of watchpoint_check call.
(breakpoint_re_set_one): Now returns void and takes a breakpoint
pointer as parameter.
(breakpoint_re_set): Use TRY/CATCH instead of catch_errors.
* common/common-exceptions.c (throw_exception_sjlj): Update
comments to avoid mentioning catch_errors.
* exceptions.c (catch_errors): Delete.
* exceptions.h: Update comments to avoid mentioning catch_errors.
(catch_errors_ftype, catch_errors): Delete.
* infrun.c (normal_stop): Use TRY/CATCH instead of catch_errors.
(hook_stop_stub): Delete.
(restore_selected_frame): Change return type to void, and
parameter type to const frame_id &.
(restore_infcall_control_state): Use TRY/CATCH instead of
catch_errors.
* main.c (captured_command_loop): Return void and remove
parameter. Remove references to catch_errors.
(captured_main): Use TRY/CATCH instead of catch_errors.
* objc-lang.c (objc_submethod_helper_data)
(find_objc_msgcall_submethod_helper): Delete.
(find_objc_msgcall_submethod): Use TRY/CATCH instead of
catch_errors.
* record-full.c (record_full_message): Return void.
(record_full_message_args, record_full_message_wrapper): Delete.
(record_full_message_wrapper_safe): Return bool and use TRY/CATCH
instead of catch_errors.
* solib-aix.c (solib_aix_open_symbol_file_object): Change
parameter type to int.
* solib-darwin.c (open_symbol_file_object): Ditto.
* solib-dsbt.c (open_symbol_file_object): Ditto.
* solib-frv.c (open_symbol_file_object): Ditto.
* solib-svr4.c (open_symbol_file_object): Ditto.
* solib-target.c (solib_target_open_symbol_file_object): Ditto.
* solib.c (update_solib_list): Use TRY/CATCH instead of
catch_errors.
* solist.h (struct target_so_ops) <open_symbol_file_object>:
Change type.
* symmisc.c (struct print_symbol_args): Remove.
(dump_symtab_1): Use TRY/CATCH instead of catch_errors.
(print_symbol): Change type.
* windows-nat.c (handle_load_dll, handle_unload_dll): Return void
and remove parameters.
(catch_errors): New.
(get_windows_debug_event): Adjust.
gdb/testsuite/ChangeLog:
2017-10-10 Pedro Alves <palves@redhat.com>
* lib/selftest-support.exp (selftest_setup): Update for
captured_command_loop's prototype change.
This patch changes most sites calling tilde_expand to use
gdb::unique_xmalloc_ptr, rather than a cleanup. It also changes
scan_expression_with_cleanup to return a unique pointer, because the
patch was already touching code in that area.
Regression tested on the buildbot.
ChangeLog
2017-08-05 Tom Tromey <tom@tromey.com>
* compile/compile-object-load.c (compile_object_load): Use
gdb::unique_xmalloc_ptr.
* cli/cli-dump.c (scan_filename): Rename from
scan_filename_with_cleanup. Change return type.
(scan_expression): Rename from scan_expression_with_cleanup.
Change return type.
(dump_memory_to_file, dump_value_to_file, restore_command):
Use gdb::unique_xmalloc_ptr. Update.
* cli/cli-cmds.c (find_and_open_script): Use
gdb::unique_xmalloc_ptr.
* tracefile-tfile.c (tfile_open): Use gdb::unique_xmalloc_ptr.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols): Use gdb::unique_xmalloc_ptr.
* symfile.c (symfile_bfd_open, generic_load)
(add_symbol_file_command, remove_symbol_file_command): Use
gdb::unique_xmalloc_ptr.
* source.c (openp): Use gdb::unique_xmalloc_ptr.
* psymtab.c (maintenance_print_psymbols): Use
gdb::unique_xmalloc_ptr.
* corelow.c (core_open): Use gdb::unique_xmalloc_ptr.
* breakpoint.c (save_breakpoints): Use gdb::unique_xmalloc_ptr.
* solib.c (solib_map_sections): Use gdb::unique_xmalloc_ptr.
(reload_shared_libraries_1): Likewise.
This introduces gdb_argv, a class wrapping an "argv" pointer; that is,
a pointer to a NULL-terminated array of char*, where both the array
and each non-NULL element in the array are xmalloc'd.
This patch then changes most users of gdb_buildargv to use gdb_argv
instead.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* utils.h (struct gdb_argv_deleter): New.
(gdb_argv): New class.
* utils.c (gdb_argv::reset): New method.
* tracepoint.c (delete_trace_variable_command): Use gdb_argv.
* tracefile.c (tsave_command): Use gdb_argv.
* top.c (new_ui_command): Use gdb_argv.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols, maintenance_expand_symtabs): Use gdb_argv.
* symfile.c (symbol_file_command, generic_load)
(remove_symbol_file_command): Use gdb_argv.
* stack.c (backtrace_command): Use gdb_argv.
* source.c (add_path, show_substitute_path_command)
(unset_substitute_path_command, set_substitute_path_command):
Use gdb_argv.
* skip.c (skip_command): Use gdb_argv. Use gdb_buildargv.
* ser-mingw.c (pipe_windows_open): Use gdb_argv.
* remote.c (extended_remote_run, remote_put_command)
(remote_get_command, remote_delete_command): Use gdb_argv.
* remote-sim.c (gdbsim_load, gdbsim_create_inferior)
(gdbsim_open): Use gdb_argv.
* python/py-cmd.c (gdbpy_string_to_argv): Use gdb_argv.
* psymtab.c (maintenance_print_psymbols): Use gdb_argv.
* procfs.c (procfs_info_proc): Use gdb_argv.
* interps.c (interpreter_exec_cmd): Use gdb_argv.
* infrun.c (handle_command): Use gdb_argv.
* inferior.c (add_inferior_command, clone_inferior_command):
Use gdb_argv.
* guile/scm-string.c (gdbscm_string_to_argv): Use gdb_argv.
* exec.c (exec_file_command): Use gdb_argv.
* cli/cli-cmds.c (alias_command): Use gdb_argv.
* compile/compile.c (build_argc_argv): Use gdb_argv.
I wanted to pass a lambda to iterate_over_symtabs (see following
patch), so I converted it to function_view, and then the rest is
cascaded from that.
This gets rid of a bunch of single-use callback functions and
corresponding manually managed callback capture types
(add_partial_datum, search_symbols_data, etc.) in favor of letting the
compiler generate them for us by using lambdas with a capture. In a
couple cases, it was more natural to convert the existing function
callbacks to function objects (i.e., operator(), e.g.,
decode_compound_collector).
gdb/ChangeLog:
2017-02-23 Pedro Alves <palves@redhat.com>
* ada-lang.c: Include "common/function-view.h".
(ada_iterate_over_symbols): Adjust to use function_view as
callback type.
(struct add_partial_datum, ada_complete_symbol_matcher): Delete.
(ada_make_symbol_completion_list): Use a lambda.
(ada_exc_search_name_matches): Delete.
(name_matches_regex): New.
(ada_add_global_exceptions): Use a lambda and name_matches_regex.
* compile/compile-c-support.c: Include "common/function-view.h".
(print_one_macro): Change prototype to accept a ui_file pointer.
(write_macro_definitions): Use a lambda.
* dwarf2read.c: Include "common/function-view.h".
(dw2_map_expand_apply, dw2_map_symtabs_matching_filename)
(dw2_expand_symtabs_matching): Adjust to use function_view as
callback type.
* language.h: Include "common/function-view.h".
(struct language_defn) <la_iterate_over_symbols>: Adjust to use
function_view as callback type.
(LA_ITERATE_OVER_SYMBOLS): Remove DATA parameter.
* linespec.c: Include "common/function-view.h".
(collect_info::add_symbol): New method.
(struct symbol_and_data_callback, iterate_inline_only, struct
symbol_matcher_data, iterate_name_matcher): Delete.
(iterate_over_all_matching_symtabs): Adjust to use function_view
as callback type and lambdas.
(iterate_over_file_blocks): Adjust to use function_view as
callback type.
(decode_compound_collector): Now a class with private fields.
(decode_compound_collector::release_symbols): New method.
(collect_one_symbol): Rename to...
(decode_compound_collector::operator()): ... this and adjust.
(lookup_prefix_sym): decode_compound_collector construction bits
move to decode_compound_collector ctor. Pass the
decode_compound_collector object directly as callback. Remove
cleanups and use decode_compound_collector::release_symbols
instead.
(symtab_collector): Now a class with private fields.
(symtab_collector::release_symtabs): New method.
(add_symtabs_to_list): Rename to...
(symtab_collector::operator()): ... this and adjust.
(collect_symtabs_from_filename): symtab_collector construction
bits move to symtab_collector ctor. Pass the symtab_collector
object directly as callback. Remove cleanups and use
symtab_collector::release_symtabs instead.
(collect_symbols): Delete.
(add_matching_symbols_to_info): Use lambdas.
* macrocmd.c (print_macro_callback): Delete.
(info_macro_command): Use a lambda.
(info_macros_command): Pass print_macro_definition as callable
directly.
(print_one_macro): Remove 'ignore' parameter.
(macro_list_command): Adjust.
* macrotab.c (macro_for_each_data::fn): Now a function_view.
(macro_for_each_data::user_data): Delete field.
(foreach_macro): Adjust to call the function_view.
(macro_for_each): Adjust to use function_view as callback type.
(foreach_macro_in_scope): Adjust to call the function_view.
(macro_for_each_in_scope): Adjust to use function_view as callback
type.
* macrotab.h: Include "common/function-view.h".
(macro_callback_fn): Declare a prototype instead of a pointer.
Remove "user_data" parameter.
(macro_for_each, macro_for_each_in_scope): Adjust to use
function_view as callback type.
* psymtab.c (partial_map_expand_apply)
(psym_map_symtabs_matching_filename, recursively_search_psymtabs):
Adjust to use function_view as callback type and to return bool.
(psym_expand_symtabs_matching): Adjust to use function_view as
callback types.
* symfile-debug.c (debug_qf_map_symtabs_matching_filename): Adjust
to use function_view as callback type and to return bool.
(debug_qf_expand_symtabs_matching): Adjust to use function_view as
callback types.
* symfile.c (expand_symtabs_matching): Adjust to use function_view
as callback types.
* symfile.h: Include "common/function-view.h".
(expand_symtabs_file_matcher_ftype)
(expand_symtabs_symbol_matcher_ftype)
(expand_symtabs_exp_notify_ftype): Remove "data" parameter and
return bool.
(quick_symbol_functions::map_symtabs_matching_filename)
(quick_symbol_functions::expand_symtabs_matching): Adjust to use
function_view as callback type and return bool.
(expand_symtabs_matching): Adjust to use function_view as callback
type.
(maintenance_expand_name_matcher)
(maintenance_expand_file_matcher): Delete.
(maintenance_expand_symtabs): Use lambdas.
* symtab.c (iterate_over_some_symtabs): Adjust to use
function_view as callback types and return bool.
(iterate_over_symtabs): Likewise. Use unique_xmalloc_ptr instead
of a cleanup.
(lookup_symtab_callback): Delete.
(lookup_symtab): Use a lambda.
(iterate_over_symbols): Adjust to use function_view as callback
type.
(struct search_symbols_data, search_symbols_file_matches)
(search_symbols_name_matches): Delete.
(search_symbols): Use a pair of lambdas.
(struct add_name_data, add_macro_name, symbol_completion_matcher)
(symtab_expansion_callback): Delete.
(default_make_symbol_completion_list_break_on_1): Use lambdas.
* symtab.h: Include "common/function-view.h".
(iterate_over_some_symtabs): Adjust to use function_view as
callback type and return bool.
(iterate_over_symtabs): Adjust to use function_view as callback
type.
(symbol_found_callback_ftype): Remove 'data' parameter and return
bool.
(iterate_over_symbols): Adjust to use function_view as callback
type.
This is a fix for PR gdb/21164. The problem started to happen after:
commit 34c41c681f
Author: Doug Evans <xdje42@gmail.com>
AuthorDate: Mon Dec 19 08:33:46 2016 -0800
New syntax for mt print symbols,msymbols,psymbols.
This change introduced new syntax for the mentioned commands, and
improved the parsing of arguments by using 'gdb_buildargv'. However,
it is necessary to check if the argv being built is not NULL, which
can happen if the user doesn't provide any arguments to these
commands.
gdb/ChangeLog:
2017-02-15 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21164
* psymtab.c (maintenance_print_psymbols): Verify if 'argv' is not
NULL before using it.
* symmisc.c (maintenance_print_symbols): Likewise.
(maintenance_print_msymbols): Likewise.
gdb/testsuite/ChangeLog:
gdb/ChangeLog:
2017-02-15 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21164
* gdb.base/maint.exp: Add testcases for when the commands do
not have arguments.
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Add a new command 'maint info line-table' to display the contents of
GDB's internal line table structure. Useful when trying to understand
problems (within gdb) relating to line tables.
gdb/ChangeLog:
* symmisc.c (maintenance_info_line_tables): New function.
(maintenance_print_one_line_table): New function.
(_initialize_symmisc): Register 'maint info line-table' command.
* NEWS: Mention new command.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new 'maint info line-table'
command.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: New tests for 'maint info line-table'.
This commit adds a new callback parameter, "expansion_notify", to the
top-level expand_symtabs_matching function and to all the vectorized
functions it defers to. If expansion_notify is non-NULL, it will be
called every time a symbol table is expanded.
gdb/ChangeLog:
* symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
(struct quick_symbol_functions) <expand_symtabs_matching>:
New argument expansion_notify. All uses updated.
(expand_symtabs_matching): New argument expansion_notify.
All uses updated.
* symfile-debug.c (debug_qf_expand_symtabs_matching):
Also print expansion notify.
* symtab.c (expand_symtabs_matching_via_partial): Call
expansion_notify whenever a partial symbol table is expanded.
* dwarf2read.c (dw2_expand_symtabs_matching): Call
expansion_notify whenever a symbol table is instantiated.