the lower 32-bit halves of the GPRS to be their own raw registers,
not pseudoregisters.
* ppc-tdep.h (struct gdbarch_tdep): Remove ppc_gprs_pseudo_p flag;
add ppc_ev0_upper_regnum flag.
* rs6000-tdep.c: #include "reggroups.h".
(spe_register_p): Recognize the ev upper half registers as SPE
registers.
(init_sim_regno_table): Build gdb->sim mappings for the upper-half
registers.
(e500_move_ev_register): New function.
(e500_pseudo_register_read, e500_pseudo_register_write): The 'ev'
vector registers are the pseudo-registers now, formed by splicing
together the gprs and the upper-half registers.
(e500_register_reggroup_p): New function.
(P): Macro deleted.
(P8, A4): New macro.
(PPC_EV_REGS, PPC_GPRS_PSEUDO_REGS): Macros deleted.
(PPC_SPE_GP_REGS, PPC_SPE_UPPER_GP_REGS, PPC_EV_PSEUDO_REGS): New
macros.
(registers_e500): Rearrange register set so that the raw register
set contains 32-bit GPRs and upper-half registers, and the SPE
vector registers become pseudo-registers.
(rs6000_gdbarch_init): Don't initialize tdep->ppc_gprs_pseudo_p;
it has been deleted. Initialize ppc_ev0_upper_regnum. Many other
register numbers are now the same for the E500 as they are for
other PowerPC variants. Register e500_register_reggroup_p as the
register group function for the E500.
* Makefile.in (rs6000-tdep.o): Update dependencies.
Adapt PPC E500 native support to the new raw regcache layout.
* ppc-linux-nat.c (struct gdb_evrregset_t): Doc fixes.
(read_spliced_spe_reg, write_spliced_spe_reg): Deleted.
(fetch_spe_register, store_spe_register): Handle fetching/storing
all the SPE registers at once, if regno == -1. These now take
over the job of fetch_spe_registers and store_spe_registers.
(fetch_spe_registers, store_spe_registers): Deleted.
(fetch_ppc_registers, store_ppc_registers): Fetch/store gprs
unconditionally; they're always raw. Fetch/store SPE upper half
registers, if present, instead of ev registers.
(fetch_register, store_register): Remove sanity checks: gprs are
never pseudo-registers now, so we never need to even mention any
registers that are ever pseudoregisters.
* ppc-linux-tdep.c (ppc_linux_init_abi): Add [sic] to Linux.
* ppc-linux-nat.c: Use "Linux kernel".
* hppa-linux-tdep.c: Use GNU/Linux.
* hppa-linux-nat.c: Use GNU/Linux.
* dwarfread.c: Add [sic] to use of Linux.
* ppc-tdep.h (struct gdbarch_tdep): New member: 'ppc_gprs_pseudo_p'.
* rs6000-tdep.c (rs6000_gdbarch_init): Initialize it to false on
all architectures except the E500.
* ppc-linux-nat.c: (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): New
#definitions.
(struct gdb_evrregset_t): New type.
(have_ptrace_getsetevrregs): New variable.
(get_spe_registers, read_spliced_spe_reg, fetch_spe_register,
fetch_spe_registers): New functions.
(fetch_register): Call fetch_spe_register as appropriate.
Assert that we're only passed raw register numbers.
(fetch_ppc_registers): Call fetch_spe_registers as appropriate.
Don't fetch gprs if they're pseudoregisters.
(set_spe_registers, write_spliced_spe_reg, store_spe_register,
store_spe_registers): New functions.
(store_register): Call store_spe_register as appropriate.
Assert that we're only passed raw register numbers.
(store_ppc_registers): Call store_spe_registers as appropriate.
Don't store gprs if they're pseudoregisters.
ppc_fp0_regnum and ppc_fpscr_regnum: if they are -1, then this
processor variant lacks those registers.
(ppc_floating_point_unit_p): Change description to make it clear
that this returns info about the ISA, not the ABI.
* rs6000-tdep.c (ppc_floating_point_unit_p): Decide whether to
return true or false by checking tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum. The original code replicated the BFD
arch/mach switching done in rs6000_gdbarch_init; it's better to
keep that logic there, and just check the results here.
(rs6000_gdbarch_init): On the E500, set tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum to -1 to indicate that we have no
floating-point registers.
(ppc_supply_fpregset, ppc_collect_fpregset)
(rs6000_push_dummy_call, rs6000_extract_return_value)
(rs6000_store_return_value): Assert that we have floating-point
registers.
(rs6000_dwarf2_stab_reg_to_regnum): Add FIXME.
(rs6000_frame_cache): Don't note the locations at which
floating-point registers were saved if we have no fprs.
* aix-thread.c (supply_fprs, fill_fprs): Assert that we have FP
registers.
(fetch_regs_user_thread, fetch_regs_kernel_thread)
(store_regs_user_thread, store_regs_kernel_thread): Only call
supply_fprs / fill_fprs if we actually have floating-point
registers.
(special_register_p): Check ppc_fpscr_regnum before matching
against it.
(supply_sprs64, supply_sprs32, fill_sprs64, fill_sprs32): Don't
supply / collect fpscr if we don't have it.
* ppc-bdm.c: #include "gdb_assert.h".
(bdm_ppc_fetch_registers, bdm_ppc_store_registers): Assert that we
have floating-point registers, since I can't test this code on
FP-free systems to adapt it.
* ppc-linux-nat.c (ppc_register_u_addr): Don't match against the
fpscr and floating point register numbers if they don't exist.
(fetch_register): Assert that we have floating-point registers
before we reach the code that handles them.
(store_register): Same. And use tdep instead of calling
gdbarch_tdep again.
(fill_fpregset): Don't try to collect FP registers and fpscr if we
don't have them.
(ppc_linux_sigtramp_cache): Don't record the saved locations of
fprs and fpscr if we don't have them.
(ppc_linux_supply_fpregset): Don't supply fp regs and fpscr if we
don't have them.
* ppcnbsd-nat.c: #include "gdb_assert.h".
(getfpregs_supplies): Assert that we have floating-point registers.
* ppcnbsd-tdep.c (ppcnbsd_supply_fpreg, ppcnbsd_fill_fpreg): Same.
* ppcobsd-tdep.c: #include "gdb_assert.h".
(ppcobsd_supply_gregset, ppcobsd_collect_gregset): Assert that we
have floating-point registers.
* rs6000-nat.c (regmap): Don't match against the fpscr and
floating point register numbers if they don't exist.
(fetch_inferior_registers, store_inferior_registers,
fetch_core_registers): Only fetch / store / supply the
floating-point registers and the fpscr if we have them.
* Makefile.in (ppc-bdm.o, ppc-linux-nat.o, ppcnbsd-nat.o)
(ppcobsd-tdep.o): Update dependencies.
ppc_fp0_regnum and ppc_fpscr_regnum: if they are -1, then this
processor variant lacks those registers.
(ppc_floating_point_unit_p): Change description to make it clear
that this returns info about the ISA, not the ABI.
* rs6000-tdep.c (ppc_floating_point_unit_p): Decide whether to
return true or false by checking tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum. The original code replicated the BFD
arch/mach switching done in rs6000_gdbarch_init; it's better to
keep that logic there, and just check the results here.
(rs6000_gdbarch_init): On the E500, set tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum to -1 to indicate that we have no
floating-point registers.
(ppc_supply_fpregset, ppc_collect_fpregset)
(rs6000_push_dummy_call, rs6000_extract_return_value)
(rs6000_store_return_value): Assert that we have floating-point
registers.
(rs6000_dwarf2_stab_reg_to_regnum): Add FIXME.
(rs6000_frame_cache): Don't note the locations at which
floating-point registers were saved if we have no fprs.
* aix-thread.c (supply_fprs, fill_fprs): Assert that we have FP
registers.
(fetch_regs_user_thread, fetch_regs_kernel_thread)
(store_regs_user_thread, store_regs_kernel_thread): Only call
supply_fprs / fill_fprs if we actually have floating-point
registers.
(special_register_p): Check ppc_fpscr_regnum before matching
against it.
(supply_sprs64, supply_sprs32, fill_sprs64, fill_sprs32): Don't
supply / collect fpscr if we don't have it.
* ppc-bdm.c: #include "gdb_assert.h".
(bdm_ppc_fetch_registers, bdm_ppc_store_registers): Assert that we
have floating-point registers, since I can't test this code on
FP-free systems to adapt it.
* ppc-linux-nat.c (ppc_register_u_addr): Don't match against the
fpscr and floating point register numbers if they don't exist.
(fetch_register): Assert that we have floating-point registers
before we reach the code that handles them.
(store_register): Same. And use tdep instead of calling
gdbarch_tdep again.
(fill_fpregset): Don't try to collect FP registers and fpscr if we
don't have them.
(ppc_linux_sigtramp_cache): Don't record the saved locations of
fprs and fpscr if we don't have them.
(ppc_linux_supply_fpregset): Don't supply fp regs and fpscr if we
don't have them.
* ppcnbsd-nat.c: #include "gdb_assert.h".
(getfpregs_supplies): Assert that we have floating-point registers.
* ppcnbsd-tdep.c (ppcnbsd_supply_fpreg, ppcnbsd_fill_fpreg): Same.
* ppcobsd-tdep.c: #include "gdb_assert.h".
(ppcobsd_supply_gregset, ppcobsd_collect_gregset): Assert that we
have floating-point registers.
* rs6000-nat.c (regmap): Don't match against the fpscr and
floating point register numbers if they don't exist.
(fetch_inferior_registers, store_inferior_registers,
fetch_core_registers): Only fetch / store / supply the
floating-point registers and the fpscr if we have them.
* Makefile.in (ppc-bdm.o, ppc-linux-nat.o, ppcnbsd-nat.o)
(ppcobsd-tdep.o): Update dependencies.
Don't assume that the gprs, fprs, and UISA sprs are
contiguous, start at register number zero, and end with fpscr.
Instead, use the numbers from the tdep structure.
* ppc-linux-nat.c (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Define.
(have_ptrace_getvrregs): Define for run time checks.
(gdb_vrregset_t): New type for Altivec register handling.
(fetch_register, store_register): Fetch/store altivec register
when needed.
(fetch_altivec_register, store_altivec_register): New functions.
(supply_vrregset, fill_vrregset): New functions.
(fetch_altivec_registers, store_altivec_registers): New functions.
(fetch_ppc_registers, store_ppc_registers): Fetch/store altivec
registers as well.
* ppc-linux-nat.c: Update copyright.
(fetch_register, store_register): Add tid parameter, don't compute
tid here.
(fetch_ppc_registers, store_ppc_registers): Add tid
parameter. Pass it along to callees.
(fetch_inferior_registers, store_inferior_registers): Compute tid
here, and pass it to calleed functions.
(fill_gregset, supply_fpregset): Clean up formatting.
* ppc-linux-nat.c (ppc_register_u_addr, supply_gregset,
fill_gregset): Call gdbarch_tdep() just once, assign result to
variable and use that, instead of calling the function several
times.
* ppc-linux-nat.c (ppc_ptrace_cannot_fetch_store_register):
New function.
(fetch_register): New function.
(fetch_ppc_registers): New function.
(fetch_inferior_registers): New function.
(store_register): New function.
(store_ppc_registers): New function.
(store_inferior_registers): New function.
(ppc_register_u_addr): Eliminate ustart parameter and its
uses. Make static.
(PT_READ_U, PT_WRITE_U, PTRACE_XFER_TYPE): Define if needed.
Include sys/ptrace.h.
* config/powerpc/nm-linux.h (FETCH_INFERIOR_REGISTERS): Define.
(U_REGS_OFFSET, REGISTER_U_ADDR): Delete.
* config/powerpc/linux.mh (NATDEPFILES): Delete core-aout.o.
* gregset.h: New file. Typedefs for gdb_gregset_t and
gdb_fpregset_t, prototypes for supply_gregset and friends.
* procfs.c: Include gregset.h. Delete local prototypes for
supply_gregset etc., and local typedef gdb_gregset_t etc.
* sol-thread.c: Include gregset.h, delete local prototypes,
add appropriate casts to gdb_gregset_t.
* uw-thread.c, lin-thread.c, core-sol2.c, core-regset.c,
sparc-tdep.c, ptx4-nat.c, ppc-linux-nat.c, mipsv4-nat.c,
m88k-nat.c, m68klinux-nat.c, m68k-tdep.c, irix5-nat.c,
irix4-nat.c, ia64-linux-nat.c, i386v4-nat.c, cxux-nat.c,
arm-linux-nat.c, alpha-nat.c: Include gregset.h.
* config/nm-linux.h: Define GDB_GREGSET_T, GDB_FPREGET_T.
* config/sparc/tm-sun4sol2.h: Ditto.
Jim Blandy