As suggested by Pedro, this changes a few spots to use getcurx, rather
than getyx. This avoids some unused variable warnings.
2016-07-14 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_show_source_line): Use getcurx.
* tui/tui-io.c (tui_puts): Use getcurx.
(tui_redisplay_readline): Likewise.
Currently when a "step", "next", etc. finishes, the current source
line is printed on all console UIs.
This patch makes the CLI and TUI interpreters reuse MI's logic to only
emit console output related to a synchronous command on the
console-like interpreter that started the command in the first place.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_on_normal_stop): Bail out early if there's
nothing to print. Use should_print_stop_to_console.
* tui/tui-interp.c (tui_on_normal_stop): Likewise.
All interpreter types (CLI/TUI/MI) print the prompt, and then call
start_event_loop.
Because we'll need an interpreter hook to display the
interpreter-specific prompt before going back to the event loop,
without actually starting an event loop, this patch moves the
start_event_loop call to common code, and replaces the command_loop
hook with a pre_command_look hook, that now just prints the prompt.
Turns out to be a cleanup on its own right anyway.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interpreter_pre_command_loop): New
function.
(cli_interp_procs): Install it instead of cli_command_loop.
* cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare.
* event-top.c (cli_command_loop): Delete.
* interps.c (interp_new): Remove reference to command_loop_proc.
(current_interp_command_loop): Delete.
(interp_pre_command_loop): New function.
(interp_command_loop_ftype): Delete.
* interps.h (interp_pre_command_loop_ftype): New typedef.
(struct interp_procs) <command_loop_proc>: Delele field.
<pre_command_loop_proc>: New field.
(current_interp_command_loop): Delete declaration.
(interp_pre_command_loop): New declaration.
* main.c (captured_command_loop): Call interp_pre_command_loop
instead of current_interp_command_loop and start an event loop.
* mi/mi-interp.c (mi_command_loop): Delete.
(mi_interpreter_pre_command_loop): New.
(mi_interp_procs): Update.
* tui/tui-interp.c (tui_interp_procs): Install
cli_interpreter_pre_command_loop instead of cli_command_loop.
Due to the way that readline's API works (based on globals), we can
only have one instance of readline in a process. So the goal of this
patch is to only allow editing in the main UI, and make sure that only
one UI calls into readline. Some MI paths touch readline variables
currently, which is bad as that is changing variables that matter for
the main console UI. This patch fixes those.
This actually fixes a nasty bug -- starting gdb in MI mode ("gdb
-i=mi"), and then doing "set editing on" crashes GDB, because MI is
not prepared to use readline:
set editing on
&"set editing on\n"
=cmd-param-changed,param="editing",value="on"
^done
(gdb)
p 1
readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
The fix for that was to add an interp_proc method to query the
interpreter whether it actually supports editing. New test included.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
PR mi/20034
* cli/cli-interp.c: Include cli-interp.h and event-top.h.
(cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the
UI's input_handler here.
(cli_interpreter_supports_command_editing): New function.
(cli_interp_procs): Install it.
* cli/cli-interp.h: New file.
* event-top.c (async_command_editing_p): Rename to ...
(set_editing_cmd_var): ... this.
(change_line_handler): Add parameter 'editing', and use it. Bail
early if the interpreter doesn't support editing. Don't touch
readline state if editing is off.
(gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
(gdb_rl_callback_handler_reinstall): Assert the current UI is the
main UI.
(display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if
not using readline. Check whether the current UI is using command
editing instead of checking the async_command_editing_p global.
(set_async_editing_command): Delete.
(gdb_setup_readline): Add 'editing' parameter. Only allow editing
on the main UI. Don't touch readline state if editing is off.
(gdb_disable_readline): Don't touch readline state if editing is
off.
* event-top.h (gdb_setup_readline): Add 'int' parameter.
(set_async_editing_command): Delete declaration.
(change_line_handler, command_line_handler): Declare.
(async_command_editing_p): Rename to ...
(set_editing_cmd_var): ... this.
* infrun.c (reinstall_readline_callback_handler_cleanup): Check
whether the current UI has editing enabled rather than checking
the async_command_editing_p global.
* interps.c (interp_supports_command_editing): New function.
* interps.h (interp_supports_command_editing_ftype): New typedef.
(struct interp_procs) <supports_command_editing_proc>: New field.
(interp_supports_command_editing): Declare.
* mi/mi-interp.c (mi_interpreter_resume): Pass 0 to
gdb_setup_readline. Don't clear the async_command_editing_p
global. Update comments.
* top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check
whether the current UI has editing enabled rather than checking
the async_command_editing_p global. Don't touch readline state if
editing is off.
(undo_terminal_modifications_before_exit): Switch to the main UI.
Unconditionally call gdb_disable_readline.
(set_editing): New function.
(show_async_command_editing_p): Rename to ...
(show_editing): ... this. Show the state of the current UI.
(_initialize_top): Adjust.
* top.h (struct ui) <command_editing>: New field.
* tui/tui-interp.c: Include cli/cli-interp.h.
(tui_resume): Pass 1 to gdb_setup_readline. Set the UI's
input_handler.
(tui_interp_procs): Install
cli_interpreter_supports_command_editing.
* tui/tui-io.c (tui_getc): Check whether the current UI has
editing enabled rather than checking the async_command_editing_p
global.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
PR mi/20034
* gdb.mi/mi-editing.exp: New file.
When we have multiple consoles, MI channels, etc., then we need to
broadcast breakpoint hits, etc. to all UIs. In the past, I've
adjusted most of the run control to communicate events to the
interpreters through observer notifications, so events would be
properly sent to console and MI streams, in sync and async modes.
This patch does the next logical step -- have each interpreter's
observers output interpreter-specific info to _all_ UIs.
Note that when we have multiple instances of active cli/tui
interpreters, then the cli_interp and tui_interp globals no longer
work. This is addressed by this patch.
Also, the interpreters currently register some observers when resumed
and remove them when suspended. If we have multiple instances of the
interpreters, and they can be suspended/resumed at different,
independent times, that no longer works. What we instead do is always
install the observers, and then have the observers themselves know
when to do nothing.
An earlier prototype of this series did the looping over struct UIs in
common code, and then dispatched events to the interpreters through a
matching interp_on_foo method for each observer. That turned out a
lot more complicated than the present solution, as we'd end up with
having to create a new interp method every time some interpreter
wanted to listen to some observer notification, resulting in a lot of
duplicated make-work and more coupling than desirable.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interp): Delete.
(as_cli_interp): New function.
(cli_on_normal_stop, cli_on_signal_received)
(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
(cli_on_no_history): Send output to all CLI UIs.
(cli_on_sync_execution_done, cli_on_command_error): Skip output if
the top level interpreter is not a CLI.
(cli_interpreter_init): Don't set cli_interp or install observers
here.
(_initialize_cli_interp): Install observers here.
* event-top.c (main_ui_, ui_list): New globals.
(current_ui): Point to main_ui_.
(restore_ui_cleanup, switch_thru_all_uis_init)
(switch_thru_all_uis_cond, switch_thru_all_uis_next): New
functions.
* mi/mi-interp.c (as_mi_interp): New function.
(mi_interpreter_init): Don't install observers here.
(mi_on_sync_execution_done): Skip output if the top level
interpreter is not a MI.
(mi_new_thread, mi_thread_exit, mi_record_changed)
(mi_inferior_added, mi_inferior_appeared, mi_inferior_exit)
(mi_inferior_removed): Send output to all MI UIs.
(find_mi_interpreter, mi_interp_data): Delete.
(find_mi_interp): New function.
(mi_on_signal_received, mi_on_end_stepping_range)
(mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output
to all MI UIs.
(mi_on_normal_stop): Rename to ...
(mi_on_normal_stop_1): ... this.
(mi_on_normal_stop): Reimplement, sending output to all MI UIs.
(mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted)
(mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted)
(mi_breakpoint_modified, mi_output_running_pid): Send output to
all MI UIs.
(mi_on_resume): Rename to ...
(mi_on_resume_1): ... this. Don't handle infcalls here.
(mi_on_resume): Reimplement, sending output to all MI UIs.
(mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
(mi_memory_changed): Send output to all MI UIs.
(report_initial_inferior): Install observers here.
* top.h (struct ui) <next>: New field.
(ui_list): Declare.
(struct switch_thru_all_uis): New.
(switch_thru_all_uis_init, switch_thru_all_uis_cond)
(switch_thru_all_uis_next): Declare.
(SWITCH_THRU_ALL_UIS): New macro.
* tui/tui-interp.c (tui_interp): Delete global.
(as_tui_interp): New function.
(tui_on_normal_stop, tui_on_signal_received)
(tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
(tui_on_no_history): Send output to all TUI UIs.
(tui_on_sync_execution_done, tui_on_command_error): Skip output if
the top level interpreter is not a TUI.
(tui_init): Don't set tui_interp or install observers here.
(_initialize_tui_interp): Install observers here.
If every UI instance has its own set of interpreters, then the current
scheme of creating the interpreters at GDB initialization time no
longer works. We need to create them whenever a new UI instance is
created.
The scheme implemented here has each interpreter register a factory
callback that when called creates a new instance of a specific
interpreter type. Then, when some code in gdb looks up an interpreter
(always by name), if there's none yet, the factory method is called to
construct one.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_uiout): Delete, moved into ...
(struct cli_interp): ... this new structure.
(cli_on_normal_stop, cli_on_signal_received)
(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
(cli_on_no_history): Use interp_ui_out.
(cli_interpreter_init): If top level, set the cli_interp global.
(cli_interpreter_init): Return the interp's data instead of NULL.
(cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust
to cli_uiout being in the interpreter's data.
(cli_interp_procs): New, factored out from _initialize_cli_interp.
(cli_interp_factory): New function.
(_initialize_cli_interp): Call interp_factory_register.
* interps.c (get_interp_info): New, factored out from ...
(get_current_interp_info): ... this.
(interp_new): Add parameter 'data'. Store it.
(struct interp_factory): New function.
(interp_factory_p): New typedef. Define a VEC_P.
(interpreter_factories): New global.
(interp_factory_register): New function.
(interp_add): Add 'ui' parameter. Use get_interp_info and
interp_lookup_existing.
(interp_lookup): Rename to ...
(interp_lookup_existing): ... this. Add 'ui' parameter. Don't
check for NULL or empty name here.
(interp_lookup): Add 'ui' parameter and reimplement.
(interp_set_temp, interpreter_exec_cmd): Adjust.
(interpreter_completer): Complete on registered interpreter
factories instead of interpreters.
* interps.h (interp_factory_func): New typedef.
(interp_factory_register): Declare.
(interp_new, interp_add): Adjust.
(interp_lookup): Declare.
* main.c (captured_main): Adjust.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust.
(mi_interp_procs): New, factored out from
_initialize_mi_interp.
(mi_interp_factory): New function.
* python/python.c (execute_gdb_command): Adjust.
* tui/tui-interp.c (tui_init): If top level, set the tui_interp
global.
(tui_interp_procs): New.
(tui_interp_factory): New function.
(_initialize_tui_interp): Call interp_factory_register.
As can be seen in the tui_redisplay_readline comment:
"The command could call prompt_for_continue and we must not restore
SingleKey so that the prompt and normal keymap are used."
immediate_quit is being used as proxy for "secondary prompt".
We have a better predicate nowadays, so use it.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* tui/tui-io.c (tui_redisplay_readline): Check
gdb_in_secondary_prompt_p instead of immediate_quit.
* tui/tui.c: Include top.h.
(tui_rl_startup_hook): Check gdb_in_secondary_prompt_p instead of
immediate_quit.
I stumbled upon this while doing some cxx-conversion work. Since the
x-family alloc functions throw on failure, it is useless to test their
result for failure. The else branch of != NULL is basically dead code.
I changed the type of element_block_ptr to struct tui_win_element, which
seems obvious (this is actually what raised the flag, casting the result
of xmalloc to struct tui_win_element* wouldn't work).
gdb/ChangeLog:
* tui/tui-data.c (tui_alloc_content): Don't check xmalloc
result. Change type of element_block_ptr. Change allocation to
use XNEWVEC.
The (void *) casts make the build fail in C++ mode and are unnecessary.
gdb/ChangeLog:
* tui/tui-data.c (tui_add_to_source_windows): Remove void *
cast.
(tui_add_content_elements): Likewise.
This adds an object oriented replacement for the "struct continuation"
mechanism, and converts the stepping commands (step, next, stepi,
nexti) and the "finish" commands to use it.
It adds a new thread "class" (struct thread_fsm) that contains the
necessary info and callbacks to manage the state machine of a thread's
execution command.
This allows getting rid of some hacks. E.g., in fetch_inferior_event
and normal_stop we no longer need to know whether a thread is doing a
multi-step (e.g., step N). This effectively makes the
intermediate_continuations unused -- they'll be garbage collected in a
separate patch. (They were never a proper abstraction, IMO. See how
fetch_inferior_event needs to check step_multi before knowing whether
to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.)
The target async vs !async uiout hacks in mi_on_normal_stop go away
too.
print_stop_event is no longer called from normal_stop. Instead it is
now called from within each interpreter's normal_stop observer. This
clears the path to make each interpreter print a stop event the way it
sees fit. Currently we have some hacks in common code to
differenciate CLI vs TUI vs MI around this area.
The "finish" command's FSM class stores the return value plus that
value's position in the value history, so that those can be printed to
both MI and CLI's streams. This fixes the CLI "finish" command when
run from MI -- it now also includes the function's return value in the
CLI stream:
(gdb)
~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n"
~"35\t}\n"
+~"Value returned is $1 = 0\n"
*stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0"
-FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output
+PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_OBS): Add thread-fsm.o.
* breakpoint.c (handle_jit_event): Print debug output.
(bpstat_what): Split event callback handling to ...
(bpstat_run_callbacks): ... this new function.
(momentary_bkpt_print_it): No longer handle bp_finish here.
* breakpoint.h (bpstat_run_callbacks): Declare.
* gdbthread.h (struct thread_info) <step_multi>: Delete field.
<thread_fsm>: New field.
(thread_cancel_execution_command): Declare.
* infcmd.c: Include thread-fsm.h.
(struct step_command_fsm): New.
(step_command_fsm_ops): New global.
(new_step_command_fsm, step_command_fsm_prepare): New functions.
(step_1): Adjust to use step_command_fsm_prepare and
prepare_one_step.
(struct step_1_continuation_args): Delete.
(step_1_continuation): Delete.
(step_command_fsm_should_stop): New function.
(step_once): Delete.
(step_command_fsm_clean_up, step_command_fsm_async_reply_reason)
(prepare_one_step): New function, based on step_once.
(until_next_command): Remove step_multi reference.
(struct return_value_info): New.
(print_return_value): Rename to ...
(print_return_value_1): ... this. New struct return_value_info
parameter. Adjust.
(print_return_value): Reimplement as wrapper around
print_return_value_1.
(struct finish_command_fsm): New.
(finish_command_continuation): Delete.
(finish_command_fsm_ops): New global.
(new_finish_command_fsm, finish_command_fsm_should_stop): New
functions.
(finish_command_fsm_clean_up, finish_command_fsm_return_value):
New.
(finish_command_continuation_free_arg): Delete.
(finish_command_fsm_async_reply_reason): New.
(finish_backward, finish_forward): Change symbol parameter to a
finish_command_fsm. Adjust.
(finish_command): Create a finish_command_fsm. Adjust.
* infrun.c: Include "thread-fsm.h".
(clear_proceed_status_thread): Delete the thread's FSM.
(infrun_thread_stop_requested_callback): Cancel the thread's
execution command.
(clean_up_just_stopped_threads_fsms): New function.
(fetch_inferior_event): Handle the event_thread's should_stop
method saying the command isn't done yet.
(process_event_stop_test): Run breakpoint callbacks here.
(print_stop_event): Rename to ...
(print_stop_location): ... this.
(restore_current_uiout_cleanup): New function.
(print_stop_event): Reimplement.
(normal_stop): No longer notify the end_stepping_range observers
here handle "step N" nor "finish" here. No longer call
print_stop_event here.
* infrun.h (struct return_value_info): Forward declare.
(print_return_value): Declare.
(print_stop_event): Change prototype.
* thread-fsm.c: New file.
* thread-fsm.h: New file.
* thread.c: Include "thread-fsm.h".
(thread_cancel_execution_command): New function.
(clear_thread_inferior_resources): Call it.
* cli/cli-interp.c (cli_on_normal_stop): New function.
(cli_interpreter_init): Install cli_on_normal_stop as normal_stop
observer.
* mi/mi-interp.c: Include "thread-fsm.h".
(restore_current_uiout_cleanup): Delete.
(mi_on_normal_stop): If the thread has an FSM associated, and it
finished, ask it for the async-reply-reason to print. Always call
print_stop_event here, regardless of the top-level interpreter.
Check bpstat_what to tell whether an asynchronous breakpoint hit
triggered.
* tui/tui-interp.c (tui_on_normal_stop): New function.
(tui_init): Install tui_on_normal_stop as normal_stop observer.
gdb/testsuite/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-cli.exp: Add CLI finish tests.
In the following code:
struct symbol *wsym = (struct symbol *) NULL;
the cast of NULL is redundant, it adds noise, and is just one more thing
to change if the type of wsym ever changes. There are a relatively
small number of places in gdb where the above code pattern is used.
Usually the cast is removed like this:
struct symbol *wsym = NULL;
This commit updates all the places within the gdb/tui directory where we
cast NULL during assignment, removing the cast.
gdb/ChangeLog:
* tui/tui-data.c (win_with_focus): Remove cast of NULL pointer.
(tui_next_win): Likewise.
(tui_prev_win): Likewise.
(tui_partial_win_by_name): Likewise.
(tui_init_generic_part): Likewise.
(init_content_element): Likewise.
(tui_del_window): Likewise.
(tui_free_window): Likewise.
(tui_del_data_windows): Likewise.
(tui_free_data_content): Likewise.
* tui/tui-layout.c (make_source_or_disasm_window): Likewise.
* tui/tui-regs.c (tui_show_register_group): Likewise.
* tui/tui-win.c (tui_resize_all): Likewise.
(tui_set_focus): Likewise.
(tui_set_win_height): Likewise.
(make_invisible_and_set_new_height): Likewise.
* tui/tui-windata.c (tui_delete_data_content_windows): Likewise.
* tui/tui-wingeneral.c (make_visible): Likewise.
Small clean up to make a local variable const and remove a cast of NULL.
gdb/ChangeLog:
* tui/tui-data.c (tui_win_name): Make local variable const, remove
cast of NULL.
This patch fixes the following bug in TUI:
(gdb) break foo
No symbol table is loaded. Use the "file" command.
Make breakpoint pending on future shared library load? (y or [n]) <ENTER>
By submitting an empty command line to a secondary prompt, the line
corresponding to the secondary prompt is undesirably cleared and
overwritten. Outside of a secondary prompt, clearing the prompt line
after submitting an empty command line is intended behavior which
complements GDB's repeat-command shorthand. But inside a secondary
prompt, this behavior is undesired since the shorthand is not applicable
in that case. We should retain the secondary-prompt line even when it's
given no input.
This patch makes sure that a prompt that was given an empty command line
is cleared and overwritten only if it's not a secondary prompt. To
acheive this, a new predicate is defined which informs us whether the
current input handler is a secondary prompt.
gdb/ChangeLog:
* top.h (gdb_in_secondary_prompt_p): Declare.
* top.c (gdb_secondary_prompt_depth): Define.
(gdb_in_secondary_prompt_p): Define.
(gdb_readline_wrapper_cleanup): Decrement
gdb_secondary_prompt_depth.
(gdb_readline_wrapper): Increment gdb_secondary_prompt_depth.
* tui/tui-io.c (tui_getc): Don't clear the prompt line if we
are in a secondary prompt.
This is necessary to make sure that start_line is updated after a
command has been entered. Usually, start_line gets updated anyway
because most commands output text, and outputting text is done through
the function tui_puts, which updates start_line. However if a command
does not output text, then tui_puts will not get called and start_line
will not get updated in time for the next prompt to be displayed.
One can observe this bug by executing the command "delete" within TUI.
After executing, the prompt line
(gdb) delete
gets overwritten by the next prompt. With this patch, the prompt line
gets preserved.
gdb/ChangeLog:
* tui/tui-io.c (tui_getc): Use tui_putc instead of waddch to
emit the newline.
These fields are currently used to track the location of the cursor
inside the command window. But their usefulness is questionable because
ncurses already internally keeps track of the location of the cursor,
whose coordinates we can query using the functions getyx(), getcurx() or
getcury(). It is an unnecessary pain to keep these fields in sync with
ncurses, and their meaning is not well-defined anyway. For instance, it
is not clear whether the coordinates held in these fields are
authoritative, or whether the coordinates reported by ncurses are.
So to keep things simple, this patch removes these fields and replaces
existing reads of these fields with calls to the appropriate ncurses
querying functions, and replaces writes to these fields with calls to
wmove() (when necessary and applicable).
In the function tui_cont_sig(), I removed the call to wmove() entirely
because moving to (start_line, curch) makes no sense. The move should
have been to (cur_line, curch) -- which would now be a no-op.
Tested on x86_64 Fedora 22, no obvious regressions.
gdb/ChangeLog:
* tui/tui-data.h (tui_command_info): Remove fields cur_line and
curch.
* tui/tui-data.c (tui_clear_win_detail) [CMD_WIN]: Don't set
cur_line or curch, instead call wmove().
(init_win_info) [CMD_WIN]: Likewise.
* tui/tui-io.c (tui_puts): Likewise. Don't read cur_line,
instead call getcury().
(tui_redisplay_readline): Don't set cur_line or curch.
(tui_mld_erase_entire_line): Don't read cur_line, instead call
getcury().
(tui_cont_sig): Remove call to wmove.
(tui_getc): Don't read cur_line or curch, instead call getcury()
or getyx(). Don't set curch.
* tui/tui-win.c (make_visible_with_new_height) [CMD_WIN]: Don't
set cur_line or curch. Always move cursor to (0,0).
Share the window name completion code from the focus command with the
winheight command, providing window name completion for the winheight
command.
gdb/ChangeLog:
* tui/tui-win.c (window_name_completer): New function.
(focus_completer): Call window_name_completer. All old content
moved into window_name_completer.
(winheight_completer): New function.
(_initialize_tui_win): Rename variable. Add completer to
winheight command. Update doc string on winheight.
In parse_scrolling_args it is possible for a string copy to leak if an
error occurs. Switching to using a cleanup fixes this leak.
In tui_set_win_height the string can't be leaked, but switching to using
a cleanup guards against the possibility that a leak could be introduced
in the future (by adding an error somewhere in the call stack).
gdb/ChangeLog:
* tui/tui-win.c (tui_set_win_height): Use a cleanup to free the
string copy.
(parse_scrolling_args): Likewise.
Don't duplicate the window names inside the completion function.
Instead make use of the existing defines, and the tui_win_name function
to obtain the window names.
gdb/ChangeLog:
* tui/tui-win.c (focus_completer): Don't duplicate the tui window
names in this function.
This commit converts the window names for the TUI windows to lower case.
The windows names are already lower case in the documentation, and are
shown as lower case in some of the command completion results.
Given that all the commands that take a window name currently accept
upper or lower case, this commit just changes the window names to lower
case in the remaining places they are displayed by gdb.
gdb/ChangeLog:
* tui/tui-data.h (SRC_NAME): Convert to lower case.
(CMD_NAME): Likewise.
(DATA_NAME): Likewise.
(DISASSEM_NAME): Likewise.
* tui/tui-win.c (tui_set_focus): Window names are now lower case.
(tui_set_win_height): Likewise.
(parse_scrolling_args): Likewise.
This is a straightforward replacement of the TUI's use of the
aforementioned hook with the register_changed observer. Since this was
the only user of the hook, this patch also removes the hook.
gdb/ChangeLog:
* defs.h (deprecated_register_changed_hook): Remove prototype.
* interps.c (clear_iterpreter_hooks): Remove reference to
deprecated_register_changed_hook.
* top.c (deprecated_register_changed_hook): Remove prototype.
* valops.c (value_assign): Remove reference to
deprecated_register_changed_hook.
* tui/tui-hooks.c (tui_register_changed): Add parameter "frame".
Add comment documenting the function.
(tui_register_changed_observer): Define.
(tui_install_hooks): Remove reference to
deprecated_register_changed_hook. Set
tui_register_changed_observer.
(tui_remove_hooks): Remove reference to
deprecated_register_changed_hook. Unset
tui_register_changed_observer.
Instead of casting between structure types to get the 'tui_gen_win_info'
info from a 'tui_win_info' access the generic member variable. This is
inline with what is done throughout the rest of the tui code.
gdb/ChangeLog:
* tui/tui-win.c (tui_set_focus): Use structure member 'generic'
instead of casting the structure type.
This commit makes the parameter and the result for 'tui_win_name'
constant. There's one place in the code that is then updated as a
result of this change.
gdb/ChangeLog:
* tui/tui-data.c (tui_partial_win_by_name): Window name is const.
(tui_win_name): Make parameter and result const.
* tui/tui-data.h (tui_win_name): Make parameter and result const.
When I replaced TUI's frame_changed hook to fix PR tui/13378 I assumed
that there's no reason to refresh register information following a call
to "up", "down" or "frame". This assumption was made to fix the problem
of refreshing frame information twice following a sync-execution normal
stop (once in tui_normal_stop and then in tui_before_prompt) -- the
second refresh removing any highlights made by the first.
I was wrong about that -- GDB's snapshot of register information is
per-frame, and when the frame changes, registers do too (most
prominently the %rip and %rsp registers). So e.g. GDB 7.8 would
highlight such register changes after invoking "up", "down" or "frame",
and current GDB does not.
To fix this regression, this patch adds another (sufficient) condition
for refreshing register information: in
tui_refresh_frame_and_register_information, always refresh register
information if frame information has changed. This makes register
information get refreshed following a call to "up", "down" or "frame"
while still avoiding the "double refresh" issue following a normal stop.
This condition may seem to obsolete the existing registers_too_p
parameter, but it does not: following a normal stop, it is possible that
registers may have changed while frame information had not. We could be
on the exact same PC with different register values. The new condition
would not catch such a case, but the registers_too_p condition will. So
both conditions seem necessary (and either one is sufficient).
gdb/ChangeLog:
* tui/tui-hooks.c (tui_refresh_frame_and_register_information):
Update commentary. Always refresh the registers when frame
information has changed.
* tui/tui-stack.c (tui_show_frame_info): Update commentary.
Change return type to int. Return 1 if frame information has
changed, 1 otherwise.
(tui_before_prompt): Update commentary.
* tui/tui-stack.h (tui_show_frame_info): Change return type to
int.
The select_frame hook is used by TUI to update TUI's frame and register
information following changes to the selected frame. The problem with
this hook is that it gets called after every single frame change, even
if the frame change is only temporary or internal. This is the primary
cause of flickering and slowdown when running the inferior under TUI
with conditional breakpoints set. Internal GDB events are the source of
many calls to select_frame and these internal events are triggered
frequently, especially when a few conditional breakpoints are set.
This patch removes the select_frame hook altogether and instead makes
the frame and register information get updated in two key places (using
observers): after an inferior stops, and right before displaying a
prompt. The latter hook covers the case when frame information must be
updated following a call to "up", "down" or "frame", and the former
covers the case when frame and register information must be updated
after a call to "continue", "step", etc. or after the inferior stops in
async execution mode. Together these hooks should cover all the cases
when frame information ought to be refreshed (and when the relevant
windows ought to be subsequently updated).
The print_frame_info_listing hook is also effectively obsolete now, but
it still must be set while the TUI is active because its caller
print_frame_info will otherwise assume that the CLI is active, and will
print the frame informaion accordingly. So this patch also sets the
print_frame_info_listing hook to a dummy callback, in lieu of outright
removing it yet.
Effectively, with this patch, frame/PC changes that do not immediately
precede an inferior-stop event or a prompt display event no longer cause
TUI's frame and register information to be updated.
And as a result of this change and of the previous change to
tui_show_frame_info, the TUI is much more disciplined about updating the
screen, and so the flicker as described in the PR is totally gone.
gdb/ChangeLog:
PR tui/13378
* frame.c (select_frame): Remove reference to
deprecated_selected_frame_level_changed_hook.
* frame.h (deprecated_selected_frame_level_changed_hook): Remove
declaration.
* stack.c (deprecated_selected_frame_level_changed_hook):
Likewise.
* tui/tui-hooks.c (tui_selected_frame_level_changed_hook):
Rename to ...
(tui_refresh_frame_and_register_information): ... this. Bail
out if there is no stack. Don't update register information
unless registers_too_p is true.
(tui_print_frame_info_listing_hook): Rename to ...
(tui_dummy_print_frame_info_listing_hook): ... this.
(tui_before_prompt): New function.
(tui_normal_stop): New function.
(tui_before_prompt_observer): New observer.
(tui_normal_stop_observer): New observer.
(tui_install_hooks): Set
deprecated_print_frame_info_listing_hook to
tui_dummy_print_frame_info_listing_hook. Register
tui_before_prompt_observer to call tui_before_prompt and
tui_normal_stop_observer to call tui_normal_stop. Remove
reference to deprecated_selected_frame_level_changed_hook.
(tui_remove_hooks): Detach and unset tui_before_prompt_observer
and tui_normal_stop_observer. Remove reference to
deprecated_selected_frame_level_changed_hook.
tui_show_frame_info is responsible for updating the visible windows
following a change in frame information (that being the currently
selected frame, PC, line number, etc). Currently it always redraws and
refreshes each window even if frame information has not changed. This
behavior is inefficient and helps contribute to the occassional
flickering of the TUI as described in the mentioned PR.
This patch makes tui_show_frame_info refresh the windows only if frame
information has changed. Determining whether frame information has
changed is done indirectly by determining whether the locator has
changed. This approach is convenient and yet sensible because the
locator contains all the relevant info we need to check anyway: the
current PC, the line number, the name of the executable and the name of
the current function. Probably only the PC is really necessary to
check, but it doesn't hurt to check every field.
Effectively, with this patch, consecutive calls to select_frame with the
same frame/PC no longer cause TUI's frame information to be updated
multiple times.
gdb/ChangeLog:
PR tui/13378
* tui/tui-stack.c (tui_set_locator_info): Change prototype to
return an int instead of void. Return whether the locator
window has changed.
(tui_show_frame_info): If the locator info has not changed, then
bail out early to avoid refreshing the windows.
The call to tui_alloc_content in tui_set_locator_info passes
locator->type as the type of the window whose content is being
allocated. This may seem correct but it's actually not because when
this code path actually get executed locator->type has not yet been to
set LOCATOR_WIN so it defaults to 0 i.e. SRC_WIN. Thus we allocate the
content of the locator window as if it was the source window. This
oversight turns out not to be a big deal in practice but the patch that
follows depends on the locator's proc_name and full_name arrays to be
initialized to the empty string which is done by tui_alloc_content if
we pass to it LOCATOR_WIN.
This patch fixes this bug by explicitly passing LOCATOR_WIN to
tui_alloc_content.
gdb/ChangeLog:
* tui/tui-stack.c (tui_set_locator_info): Explicitly pass
LOCATOR_WIN to tui_alloc_content.
The implementation is pretty straightforward, with the only caveat being
that the "src", "cmd", "next" and "prev" entries get delibrately added
to the completion list even when the TUI has not yet been initialized
(i.e. has never been enabled during the session), since invoking the
"focus" command with these arguments already works when the TUI has not
yet been initialized.
gdb/ChangeLog:
* tui/tui-win.c (focus_completer): New static function.
(_initialize_tui_win): Set the completion function of the
"focus" command to focus_completer.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Test the completion of the "focus"
command.
In some cases tui_show_frame_info() may get called while the inferior's
terminal settings are still in effect. But when we call this function
we absolutely need to have our terminal settings in effect because the
function is responsible for redrawing TUI's windows following a change
in the selected frame or a change in the PC. If our terminal settings
are not in effect, the screen does not get redrawn properly, causing
temporary display artifacts (which can be fixed via ^L).
This scenario happens most prominently when stepping through a program
in TUI while a watchpoint is in effect.
Here is an example backtrace for when tui_show_frame_info() gets called
while target_terminal_is_inferior() == 1:
#1 0x00000000004988ee in tui_selected_frame_level_changed_hook (level=0)
#2 0x0000000000617b99 in select_frame (fi=0x18c9820)
#3 0x0000000000617c3f in get_selected_frame (message=message@entry=0x0)
#4 0x00000000004ce534 in update_watchpoint (b=b@entry=0x2d9a760,
reparse=reparse@entry=0)
#5 0x00000000004d625e in insert_breakpoints ()
#6 0x0000000000531cfe in keep_going (ecs=ecs@entry=0x7ffea7884ac0)
#7 0x00000000005326d7 in process_event_stop_test (ecs=ecs@entry=0x7ffea7884ac0)
#8 0x000000000053596e in handle_inferior_event_1 (ecs=0x7ffea7884ac0)
The fix is simple: call target_terminal_ours_for_output() before calling
tui_show_frame_info() in TUI's frame-changed hook, making sure to
restore the original terminal settings afterwards.
gdb/ChangeLog:
* tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
target_terminal_ours_for_output() before calling
tui_show_frame_info(), and restore the original terminal
settings afterwards.
We previously specified a few known register groups for the 'tui reg'
command. Other register groups could be accessed, but only by using the
'tui reg next' command and cycling through all the groups.
This commit removes the hard coded sub-commands of 'tui reg' and instead
adds dynamic completion of sub-commands based on the architecturally
defined register groups, giving immediate access to all available
register groups.
There is still the 'next' and 'prev' commands for cycling through the
register groups if that's wanted.
The new code maintains the ability to only enter partial names for
register groups, which is something we got for free when using the
standard sub-command mechanism.
The register (and register group) completer has been changed to use
get_current_arch rather than using the architecture of the currently
selected frame. When the target is running, this is equivalent,
however, when the target is not running, using get_current_arch will
provide results from the default architecture.
gdb/ChangeLog:
* completer.c: Add arch-utils.h include.
(enum reg_completer_targets): New enum.
(reg_or_group_completer_1): New function containing old
reg_or_group_completer, add and use new parameter to control what
is completed on. Use get_current_arch rather than architecture of
currently selected frame.
(reg_or_group_completer): Call new reg_or_group_completer_1.
(reggroup_completer): Call new reg_or_group_completer_1.
* completer.h (reggroup_completer): Add declaration.
* tui/tui-regs.c: Add 'completer.h' include.
(tui_reg_next_command): Renamed to...
(tui_reg_next): ...this. Adjust parameters and return rather than
display new group.
(tui_reg_prev_command): Renamed to...
(tui_reg_prev): ...this. Adjust parameters and return rather than
display new group.
(tui_reg_float_command): Delete.
(tui_reg_general_command): Delete.
(tui_reg_system_command): Delete.
(tui_reg_command): Rewrite to perform switching of register group.
Add header comment.
(tuireglist): Remove.
(tui_reggroup_completer): New function.
(_initialize_tui_regs): Remove 'tui reg' sub-commands, update
creation of 'tui reg' command.
* NEWS: Add comment about 'tui reg' changes.
gdb/doc/ChangeLog:
* gdb.texinfo (TUI Commands): Bring all 'tui reg' commands into a
single table entry.
Add new commands to specifically enable and disable tui mode. This is
in addition to the readline bindings, but might be easier for a user to
discover if they accidentally end up in tui mode.
gdb/ChangeLog:
* NEWS: Mention 'tui enable' and 'tui disable'.
* tui/tui.c (tui_enable_command): New function.
(tui_disable_command): New function.
(_initialize_tui): New function.
gdb/doc/ChangeLog:
* gdb.texinfo (TUI): Include 'tui enable' in the introduction.
(TUI Commands): Add 'tui enable' and 'tui disable' details.
Use cleanup to avoid leaking memory if an error occurs during tui
start up.
gdb/ChangeLog:
* tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
buf_ptr is freed.
Calling tui_enable too early in tui_layout_command can leave the tui in
an enabled state if the user has entered an invalid layout name.
Instead postpone the call to tui_enable until later in
tui_set_layout_for_display_command just before the layout is changed.
gdb/ChangeLog:
* tui/tui-layout.c (tui_layout_command): Move call to tui_enable
into ...
(tui_set_layout_for_display_command): ...here, before calling
tui_set_layout. Only set the layout if gdb has not already
entered the TUI_FAILURE state.
Add layout name completion for the layout command.
gdb/ChangeLog:
* tui/tui-layout.c (layout_completer): New function.
(_initialize_tui_layout): Set completer on layout command.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Add test for completion of layout
names.
The layout command supports the layout names $FREGS, $GREGS, $SREGS,
and $REGS. The intention of these layout names was to display the tui
register window with a specific set of registers.
First, these layout names no longer work, and haven't for a while, using
any of them will just result in switching to the general register view.
Second there is already the command 'tui reg GROUP' command to set the
displayed register set to GROUP, so making the layout command also
control the register set feels like unnecessary overloading of the
layout command.
This commit removes all code relating to supporting the register set
specific names from the layout command. Afterwards the user can select
an available layout using the layout command, and control the choice of
register set using the 'tui reg GROUP' command.
gdb/ChangeLog:
* tui/tui-layout.c (tui_set_layout): Remove
tui_register_display_type parameter. Remove all checking of this
parameter, and reindent function. Update header comment.
(tui_set_layout_for_display_command): Rename to...
(tui_set_layout_by_name): ...this, and don't check for different
register class types, don't pass a tui_register_display_type to
tui_set_layout. Update header comment.
(layout_names): Remove register set specific names.
* tui/tui-layout.h (tui_set_layout): Remove
tui_register_display_type parameter.
* tui/tui.c (tui_rl_change_windows): Don't pass a
tui_register_display_type to tui_set_layout.
(tui_rl_delete_other_windows): Likewise.
(tui_enable): Likewise.
* tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
(TUI_FLOAT_REGS_NAME_LOWER): Remove.
(TUI_GENERAL_REGS_NAME): Remove.
(TUI_GENERAL_REGS_NAME_LOWER): Remove.
(TUI_SPECIAL_REGS_NAME): Remove.
(TUI_SPECIAL_REGS_NAME_LOWER): Remove.
(TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
(TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
(enum tui_register_display_type): Remove.
(struct tui_layout_def): Remove regs_display_type and
float_regs_display_type fields.
(struct tui_data_info): Remove regs_display_type field.
(tui_layout_command): Use new name for
tui_set_layout_for_display_command.
* tui/tui-data.c (layout_def): Don't initialise removed fields.
(tui_clear_win_detail): Don't initialise removed fields of
win_info.
* tui/tui-regs.c (tui_show_registers): Use new name for
tui_set_layout_for_display_command.
* tui/tui.h (tui_set_layout_for_display_command): Rename
declaration to...
(tui_set_layout_by_name): ...this.
* printcmd.c (display_command): Remove tui related layout call,
and reindent.
The function tui_dispatch_ctrl_char() has an old workaround (from 1999)
for buggy terminals and/or ncurses library that don't return page
up/down keys as single characters. Because the workaround is so old, I
think the bug it is targetting is no longer relevant anymore.
But more importantly, the workaround is itself buggy: it 1) performs a
blocking call to wgetch() and 2) if the key returned by wgetch() does
not make up a relevant key sequence it throws away the input instead of
pushing it back via ungetch(). And indeed the workaround breaks Alt-key
sequences under TERM=xterm because of bug #2.
So this patch removes the buggy workaround and tidies up the function
accordingly.
I personally tested this change on a recent xterm (with TERM=xterm) in
Fedora 20 and had no problems with having ncurses properly interpret
page up/down keys. And Alt-key sequences now work when TERM=xterm too.
gdb/ChangeLog:
* tui/tui-command.c: Remove include of <ctype.h>.
(tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
The control variable win_resized must be cleared before responding to
it.
Otherwise there is a small window where another SIGWINCH might occur in
between the handling of an earlier SIGWINCH and the clearing of
win_resized, at which point win_resized would be set (again) by the
signal handler. Shortly thereafter we would clear win_resized even
though we only handled the earlier SIGWINCH but not the latest one.
This chain of events is all avoided if we clear win_resized first.
gdb/ChangeLog:
* tui/tui-win.c (tui_async_resize_screen): Clear win_resized
first before resizing the window.
* tui.c (tui_enable): Likewise.
When in the CLI, GDB's "width" and "height" variables are not kept in sync
when the underlying terminal gets resized.
This patch fixes this issue by making sure sure to update GDB's "width"
and "height" variables in the !tui_active case of our SIGWINCH handler.
gdb/ChangeLog:
* tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
(tui_sigwinch_handler): Still update our idea of
the terminal's width and height even when TUI is not active.
... to replace the roundabout pattern of
execute_command ("set width %d");
execute_command ("set height %d");
for doing the same thing.
gdb/ChangeLog:
* utils.h (set_screen_width_and_height): Declare.
* utils.c (set_screen_width_and_height): Define.
* tui/tui-win.c (tui_update_gdb_sizes): Use it.
Tom Tromey