Commit Graph

3538 Commits

Author SHA1 Message Date
Mike Frysinger 95bfe26e6b gas: mips: fix segfault with invalid default cpu strings
If you configure gas for a mips32el-* target, the default cpu calculation
gets mangled, and we end up passing and invalid value as the default cpu.

If you try executing gas after that, it segfaults.  This is because it
assumes that the default cpu value is always valid.
$ ./gas/as-new
Assembler messages:
Error: Bad value (2) for default CPU
Segmentation fault (core dumped)

I'm not debating that the target tuple is valid, just that gas shouldn't
crash.  So add a friendly assert to avoid that.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-05-22 01:55:16 +00:00
Alan Modra 59365e1917 * config/obj-elf.c (obj_elf_section): Cater for TC_KEEP_OPERAND_SPACES
targets when checking for "comdat".
2012-05-19 10:36:32 +00:00
Alan Modra f3719d90a6 * config/tc-dlx.c (s_proc): Don't use asprintf. 2012-05-18 23:21:49 +00:00
Alan Modra 74cda0c4ba * config/tc-dlx.c (s_proc): Avoid warning about ignoring asprintf
return value.
2012-05-18 05:48:50 +00:00
Alan Modra d6ed37ed5c * config/tc-ppc.c: Don't capitalise error and warning messages.
(md_parse_option): Add checks for -a32 -mvle.
2012-05-18 05:42:24 +00:00
Alan Modra 222661cb8e * config/obj-evax.c: Include as.h first. 2012-05-18 05:32:03 +00:00
Nick Clifton df7b86aa4c PR 14072
* configure.in: Add check that sysdep.h has been included before
	any system header files.
	* configure: Regenerate.
	* config.in: Regenerate.
	* sysdep.h: Generate an error if included before config.h.
	* alpha-opc.c: Include sysdep.h before any other header file.
	* alpha-dis.c: Likewise.
	* avr-dis.c: Likewise.
	* cgen-opc.c: Likewise.
	* cr16-dis.c: Likewise.
	* cris-dis.c: Likewise.
	* crx-dis.c: Likewise.
	* d10v-dis.c: Likewise.
	* d10v-opc.c: Likewise.
	* d30v-dis.c: Likewise.
	* d30v-opc.c: Likewise.
	* h8500-dis.c: Likewise.
	* i370-dis.c: Likewise.
	* i370-opc.c: Likewise.
	* m10200-dis.c: Likewise.
	* m10300-dis.c: Likewise.
	* micromips-opc.c: Likewise.
	* mips-opc.c: Likewise.
	* mips61-opc.c: Likewise.
	* moxie-dis.c: Likewise.
	* or32-opc.c: Likewise.
	* pj-dis.c: Likewise.
	* ppc-dis.c: Likewise.
	* ppc-opc.c: Likewise.
	* s390-dis.c: Likewise.
	* sh-dis.c: Likewise.
	* sh64-dis.c: Likewise.
	* sparc-dis.c: Likewise.
	* sparc-opc.c: Likewise.
	* spu-dis.c: Likewise.
	* tic30-dis.c: Likewise.
	* tic54x-dis.c: Likewise.
	* tic80-dis.c: Likewise.
	* tic80-opc.c: Likewise.
	* tilegx-dis.c: Likewise.
	* tilepro-dis.c: Likewise.
	* v850-dis.c: Likewise.
	* v850-opc.c: Likewise.
	* vax-dis.c: Likewise.
	* w65-dis.c: Likewise.
	* xgate-dis.c: Likewise.
	* xtensa-dis.c: Likewise.
	* rl78-decode.opc: Likewise.
	* rl78-decode.c: Regenerate.
	* rx-decode.opc: Likewise.
	* rx-decode.c: Regenerate.

	* configure.in: Add check that sysdep.h has been included before
	any system header files.
	* configure: Regenerate.
	* config.in: Regenerate.
	* sysdep.h: Generate an error if included before config.h.

	* configure.in: Add check that sysdep.h has been included before
	any system header files.
	* configure: Regenerate.
	* config.in: Regenerate.
	* aclocal.m4: Regenerate.
	* bfd-in.h: Generate an error if included before config.h.
	* sysdep.h: Likewise.
	* bfd-in2.h: Regenerate.
	* compress.c: Remove #include "config.h".
	* plugin.c: Likewise.
	* elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h.
	* elf64-hppa.c: Likewise.
	* som.c: Likewise.
	* xsymc.c: Likewise.

	* configure.in: Add check that sysdep.h has been included before
	any system header files.
	* configure: Regenerate.
	* config.in: Regenerate.

	* configure.in: Add check that sysdep.h has been included before
	any system header files.
	* configure: Regenerate.
	* config.in: Regenerate.
	* aclocal.m4: Regenerate.
	* Makefile.am: Use wrappers around C files generated by flex.
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
	* itbl-lex-wrapper.c: New file.
	* config/bfin-lex-wrapper.c: New file.
	* cgen.c: Include as.h before setjmp.h.
	* config/tc-dlx.c: Include as.h before any other header.
	* config/tc-h8300.c: Likewise.
	* config/tc-lm32.c: Likewise.
	* config/tc-mep.c: Likewise.
	* config/tc-microblaze.c: Likewise.
	* config/tc-mmix.c: Likewise.
	* config/tc-msp430.c: Likewise.
	* config/tc-or32.c: Likewise.
	* config/tc-tic4x.c: Likewise.
	* config/tc-tic54x.c: Likewise.
	* config/tc-xtensa.c: Likewise.

	* configure.in: Add check that sysdep.h has been included before
	any system header files.
	* configure: Regenerate.
	* config.in: Regenerate.
	* unwind-ia64.h: Include config.h.
2012-05-17 15:13:28 +00:00
Nick Clifton a0f49396fd * bfd-in.h (bfd_get_section_name, bfd_get_section_vma,
bfd_get_section_lma, bfd_get_section_alignment,
	bfd_get_section_flags, bfd_get_section_userdata): Rewrite macros
	in order to use the `bfd' argument.
	* bfd-in2.h: Regenerate.
	* elf-vxworks.c (elf_vxworks_finish_dynamic_entry): Pass proper `bfd'
	as the first argument for `bfd_get_section_alignment'.
	* elf32-arm.c (create_ifunc_sections): Likewise, for
	`bfd_set_section_alignment'.
	* elf32-m32r.c (m32r_elf_relocate_section): Likewise, for
	`bfd_get_section_name'.
	* elf32-microblaze.c (microblaze_elf_relocate_section): Likewise.
	* elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise.
	(ppc_elf_relocate_section): Likewise.
	* elf64-mmix.c (mmix_final_link_relocate): Likewise, for
	`bfd_get_section_vma'.
	* elf64-ppc.c (create_linkage_sections): Likewise, for
	`bfd_set_section_alignment'.

	* emultempl/m68hc1xelf.em (hook_in_stub): Pass proper `bfd'
	as the first argument for `bfd_get_section_name'.

	* config/tc-alpha.c (maybe_set_gp): Pass proper `bfd'
	as the first argument for `bfd_get_section_vma'.
2012-05-16 16:38:29 +00:00
Nick Clifton 40551fb82e PR 13503
* reloc.c: Rename BFD_RELOC_AVR_8_HHI to BFD_RELOC_AVR_8_HLO.
	* bfd-in2.h: Regenerate.
	* libbfd.h: Regenrate.
	* elf32-avr.c (elf_avr_howto_table): Rename R_AVR_8_HHI8 to
	R_AVR_8_HLO8.
	(avr_reloc_map): Ditto.

	* config/tc-avr.c (avr_cons_fix_new): Rename R_AVR_8_HHI8 to
	R_AVR_8_HLO8.
	(exp_mod_data) Ditto. And replace "hhi8" with "hlo8".
	(md_apply_fix): Rename BFD_RELOC_AVR_8_HHI to BFD_RELOC_AVR_8_HLO.

	* avr.h (RELOC_NUMBERS): Rename R_AVR_8_HHI8 to R_AVR_8_HLO8.
2012-05-16 14:52:16 +00:00
Nathan Sidwell c1c30076b2 * config/tc-m68k.c (m68k_cpus): Add 51ag, 51je, 51jf, 51jg, 51mm,
51qm variants.
2012-05-16 10:26:47 +00:00
Sean Keys 43a028780f Rewrote a loop that caused a seg fault on Windows systems. 2012-05-15 18:34:23 +00:00
Nick Clifton 6927f98292 * config/tc-m68hc11.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
	Tweak target flags to match other tools. (i.e. -m m68hc11).
	* doc/as.texinfo: Mention new options.
	* doc/c-m68hc11.texi: Document new options.
	* NEWS: Mention new support.

	* archures.c: Add bfd_arch_m9s12x and bfd_arch_m9s12xg.
	* config.bfd: Likewise.
	* cpu-m9s12x.c: New.
	* cpu-m9s12xg.c: New.
	* elf32-m68hc12.c: Add S12X and XGATE co-processor support.
	Add option to offset S12 addresses into XGATE memory space.
	Fix carry bug in IMM16 (IMM8 low/high) relocate.
	* Makefile.am (ALL_MACHINES): Add cpu-m9s12x and cpu-m9s12xg.
	(ALL_MACHINES_CFILES): Likewise.
	* reloc.c: Add S12X relocs.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* libbfd.h: Regenerate.

	* gas/m68hc11/insns9s12x.s: New
	* gas/m68hc11/insns9s12x.d: New
	* gas/m68hc11/hexprefix.s: New
	* gas/m68hc11/hexprefix.d: New
	* gas/m68hc11/9s12x-exg-sex-tfr.s: New
	* gas/m68hc11/9s12x-exg-sex-tfr.d: New
	* gas/m68hc11/insns9s12xg.s: New
	* gas/m68hc11/insns9s12xg.d: New
	* gas/m68hc11/9s12x-mov.s: New
	* gas/m68hc11/9s12x-mov.d: New
	* gas/m68hc11/m68hc11.exp: Updated
	* gas/m68hc11/*.d: Brought in line with changed objdump output.
	* gas/all/gas.exp: XFAIL all hc11/12 targets for redef2,3.
	* gas/elf/elf.exp: XFAIL all hc11/12 targets for redef.
	* gas/elf/dwarf2-1.d: Skip for hc11/12 targets.
	* gas/elf/dwarf2-2.d: Likewise.

	* ld-m68hc11/xgate-link.s: New.
	* ld-m68hc11/xgate-link.d: New.
	* ld-m68hc11/xgate-offset.s: New.
	* ld-m68hc11/xgate-offset.d: New.
	* ld-m68hc11/xgate1.s: New.
	* ld-m68hc11/xgate1.d: New.
	* ld-m68hc11/xgate2.s: New.
	* ld-m68hc11/m68hc11.exp: Updated.
	* ld-m68hc11/*.d: Brought in line with changed objdump output.
	* ld-gc/gc.exp: Update CFLAGS for m68hc11.
	* ld-plugin/plugin.exp: Likewise.
	* ld-srec/srec.exp: XFAIL for m68hc11 and m68hc12.

	* configure.in: Add S12X and XGATE co-processor support to m68hc11
	target.
	* disassemble.c: Likewise.
	* configure: Regenerate.
	* m68hc11-dis.c: Make objdump output more consistent, use hex
	instead of decimal and use 0x prefix for hex.
	* m68hc11-opc.c: Add S12X and XGATE opcodes.
	* dis-asm.h (print_insn_m9s12x): Prototype.
	(print_insn_m9s12xg): Prototype.

	* m68hc11.h (R_M68HC12_16B, R_M68HC12_PCREL_9, R_M68HC12_PCREL_10)
	R_M68HC12_HI8XG, R_M68HC12_LO8XG): New relocations.
	(E_M68HC11_XGATE_RAMOFFSET): Define.

	* m68hc11.h: Add XGate definitions.
	(struct m68hc11_opcode): Add xg_mask field.
2012-05-15 12:55:51 +00:00
DJ Delorie 918edac337 * config/rx-parse.y (rx_range): declare.
(O1,O2,O3,O4): Add calls to rx_range.
(UO1,UO2,UO3): Likewise.
(IMM2,IMMB): Likewise.
(rx_range): New.
2012-05-15 03:23:37 +00:00
DJ Delorie 0e25bcb440 * config/tc-rx.c (rx_fetchalign): Declare.
(md_pseudo_table): Add .fetchalign.
(RX_NBASE_FETCHALIGN): New.
(fetchalign_bytes): New.
(rx_fetchalign): New.
(rx_frag_init): If a "magic" value is found, also init the
machine-specific data.
(md_assemble): Note following opcode size if called for.
(rx_next_opcode): New.
(rx_relax_frag): Support .fetchalign.
(md_convert_frag): Likewise.
* doc/c-rx.texi (RX-Directives): Add .fetchalign.
2012-05-15 03:04:47 +00:00
James Lemke b9c361e0ad Add support for PowerPC VLE.
2012-05-14  Catherine Moore  <clm@codesourcery.com>

	* NEWS:  Mention PowerPC VLE port.

2012-05-14  James Lemke <jwlemke@codesourcery.com>
	    Catherine Moore  <clm@codesourcery.com>

	bfd/
	* bfd.c (bfd_lookup_section_flags): Add section parm.
	* ecoff.c (bfd_debug_section): Remove flag_info initializer.
	* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
	(bfd_elf_lookup_section_flags): Add section parm.
	* elf32-ppc.c (is_ppc_vle): New function.
	(ppc_elf_modify_segment_map): New function.
	(elf_backend_modify_segment_map): Define.
	(has_vle_insns): New define.
	* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
	* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
	Move in logic to omit / include a section.
	* libbfd-in.h (bfd_link_info): Add section parm.
	(bfd_generic_lookup_section_flags): Likewise.
	* reloc.c (bfd_generic_lookup_section_flags): Likewise.
	* section.c (bfd_section): Move out section_flag_info.
	(BFD_FAKE_SECTION): Remove flag_info initializer.
	* targets.c (_bfd_lookup_section_flags): Add section parm.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

	bfd/
	* archures.c (bfd_mach_ppc_vle): New.
	* bfd-in2.h: Regenerated.
	* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
	* elf32-ppc.c (split16_format_type): New enumeration.
	(ppc_elf_vle_split16): New function.
	(HOWTO): Add entries for R_PPC_VLE relocations.
	(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
	(ppc_elf_section_flags): New function.
	(ppc_elf_lookup_section_flags): New function.
	(ppc_elf_section_processing): New function.
	(ppc_elf_check_relocs): Handle PPC_VLE relocations.
	(ppc_elf_relocation_section): Likewise.
	(elf_backend_lookup_section_flags_hook): Define.
	(elf_backend_section_flags): Define.
	(elf_backend_section_processing): Define.
	* elf32-ppc.h (ppc_elf_section_processing): Declare.
	* libbfd.h: Regenerated.
	* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
	BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
	BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
	BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
	BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
	BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
	BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
	BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
	BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

	gas/
	* config/tc-ppc.c (insn_validate): New func of existing code to call..
	(ppc_setup_opcodes): ..from 2 places here.
	Revise for second (VLE) opcode table.
	Add #ifdef'd code to print opcode tables.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

	gas/
	* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
	for the VLE conditional branches.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
	    Rhonda Wittels  <rhonda@codesourcery.com>

	gas/
	* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
	(PPC_VLE_SPLIT16D): New macro.
	(PPC_VLE_LO16A): New macro.
	(PPC_VLE_LO16D): New macro.
	(PPC_VLE_HI16A): New macro.
	(PPC_VLE_HI16D): New macro.
	(PPC_VLE_HA16A): New macro.
	(PPC_VLE_HA16D): New macro.
	(PPC_APUINFO_VLE): New definition.
	(md_chars_to_number): New function.
	(md_parse_option): Check for combinations of little
	endian and -mvle.
	(md_show_usage): Document -mvle.
	(ppc_arch): Recognize VLE.
	(ppc_mach): Recognize bfd_mach_ppc_vle.
	(ppc_setup_opcodes): Print the opcode table if
	* config/tc-ppc.h (ppc_frag_check): Declare.
	* doc/c-ppc.texi: Document -mvle.
	* NEWS:  Mention PowerPC VLE port.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

	gas/
	* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
	(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
	* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
	* dwarf2dbg.c (scale_addr_delta): Handle values of 1
	for DWARF2_LINE_MIN_INSN_LENGTH.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
	    Rhonda Wittels  <rhonda@codesourcery.com>

	gas/testsuite/
	* gas/ppc/ppc.exp: Run new tests.
	* gas/ppc/vle-reloc.d: New test.
	* gas/ppc/vle-reloc.s: New test.
	* gas/ppc/vle-simple-1.d: New test.
	* gas/ppc/vle-simple-1.s: New test.
	* gas/ppc/vle-simple-2.d: New test.
	* gas/ppc/vle-simple-2.s: New test.
	* gas/ppc/vle-simple-3.d: New test.
	* gas/ppc/vle-simple-3.s: New test.
	* gas/ppc/vle-simple-4.d: New test.
	* gas/ppc/vle-simple-4.s: New test.
	* gas/ppc/vle-simple-5.d: New test.
	* gas/ppc/vle-simple-5.s: New test.
	* gas/ppc/vle-simple-6.d: New test.
	* gas/ppc/vle-simple-6.s: New test.
	* gas/ppc/vle.d: New test.
	* gas/ppc/vle.s: New test.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>
	include/elf/
	* ppc.h (SEC_PPC_VLE): Remove.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
	    James Lemke  <jwlemke@codesourcery.com>

	include/elf/
	* ppc.h (R_PPC_VLE_REL8): New reloction.
	(R_PPC_VLE_REL15): Likewise.
	(R_PPC_VLE_REL24): Likewise.
	(R_PPC_VLE_LO16A): Likewise.
	(R_PPC_VLE_LO16D): Likewise.
	(R_PPC_VLE_HI16A): Likewise.
	(R_PPC_VLE_HI16D): Likewise.
	(R_PPC_VLE_HA16A): Likewise.
	(R_PPC_VLE_HA16D): Likewise.
	(R_PPC_VLE_SDA21): Likewise.
	(R_PPC_VLE_SDA21_LO): Likewise.
	(R_PPC_VLE_SDAREL_LO16A): Likewise.
	(R_PPC_VLE_SDAREL_LO16D): Likewise.
	(R_PPC_VLE_SDAREL_HI16A): Likewise.
	(R_PPC_VLE_SDAREL_HI16D): Likewise.
	(R_PPC_VLE_SDAREL_HA16A): Likewise.
	(R_PPC_VLE_SDAREL_HA16D): Likewise.
	(SEC_PPC_VLE): Remove.
	(PF_PPC_VLE): New program header flag.
	(SHF_PPC_VLE): New section header flag.
	(vle_opcodes, vle_num_opcodes): New.
	(VLE_OP): New macro.
	(VLE_OP_TO_SEG): New macro.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
	    Rhonda Wittels  <rhonda@codesourcery.com>

	include/opcode/
	* ppc.h (PPC_OPCODE_VLE): New definition.
	(PPC_OP_SA): New macro.
	(PPC_OP_SE_VLE): New macro.
	(PPC_OP): Use a variable shift amount.
	(powerpc_operand): Update comments.
	(PPC_OPSHIFT_INV): New macro.
	(PPC_OPERAND_CR): Replace with...
	(PPC_OPERAND_CR_BIT): ...this and
	(PPC_OPERAND_CR_REG): ...this.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

	ld/
	* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
	Pass it to callback.
	(walk_wild_section_general): Pass section_flag_list to callback.
	(lang_add_section): Add sflag_list parm.
	Move out logic to keep / omit a section & call bfd_lookup_section_flags.
	(output_section_callback_fast): Add sflag_list parm.
	Add new parm to lang_add_section calls.
	(output_section_callback): Likewise.
	(check_section_callback): Add sflag_list parm.
	(lang_place_orphans): Add new parm to lang_add_section calls.
	(gc_section_callback): Add sflag_list parm.
	(find_relro_section_callback): Likewise.
	* ldlang.h (callback_t): Add flag_info parm.
	(lang_add_section): Add sflag_list parm.
	* emultempl/armelf.em (elf32_arm_add_stub_section):
	Add lang_add_section parm.
	* emultempl/beos.em (gld*_place_orphan): Likewise.
	* emultempl/elf32.em (gld*_place_orphan): Likewise.
	* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
	* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
	* emultempl/mipself.em (mips_add_stub_section): Likewise.
	* emultempl/mmo.em (mmo_place_orphan): Likewise.
	* emultempl/pe.em (gld_*_place_orphan): Likewise.
	* emultempl/pep.em (gld_*_place_orphan): Likewise.
	* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
	* emultempl/spuelf.em (spu_place_special_section): Likewise.
	* emultempl/vms.em (vms_place_orphan): Likewise.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

	ld/testsuite/
	* ld-powerpc/powerpc.exp: Create ppceabitests.
	* ld-powerpc/vle-multiseg.s: New.
	* ld-powerpc/vle-multiseg-1.d: New.
	* ld-powerpc/vle-multiseg-1.ld: New.
	* ld-powerpc/vle-multiseg-2.d: New.
	* ld-powerpc/vle-multiseg-2.ld: New.
	* ld-powerpc/vle-multiseg-3.d: New.
	* ld-powerpc/vle-multiseg-3.ld: New.
	* ld-powerpc/vle-multiseg-4.d: New.
	* ld-powerpc/vle-multiseg-4.ld: New.
	* ld-powerpc/vle-multiseg-5.d: New.
	* ld-powerpc/vle-multiseg-5.ld: New.
	* ld-powerpc/vle-multiseg-6.d: New.
	* ld-powerpc/vle-multiseg-6.ld: New.
	* ld-powerpc/vle-multiseg-6a.s: New.
	* ld-powerpc/vle-multiseg-6b.s: New.
	* ld-powerpc/vle-multiseg-6c.s: New.
	* ld-powerpc/vle-multiseg-6d.s: New.
	* ld-powerpc/powerpc.exp: Run new tests.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

	ld/
	* NEWS:  Mention PowerPC VLE port.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

	ld/testsuite/
	* ld-powerpc/apuinfo.rd: Update for VLE.
	* ld-powerpc/vle-reloc-1.d: New.
	* ld-powerpc/vle-reloc-1.s: New.
	* ld-powerpc/vle-reloc-2.d: New.
	* ld-powerpc/vle-reloc-2.s: New.
	* ld-powerpc/vle-reloc-3.d: New.
	* ld-powerpc/vle-reloc-3.s: New.
	* ld-powerpc/vle-reloc-def-1.s: New.
	* ld-powerpc/vle-reloc-def-2.s: New.
	* ld-powerpc/vle-reloc-def-3.s: New.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

	opcodes/
	* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
	(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
	(vle_opcd_indices): New array.
	(lookup_vle): New function.
	(disassemble_init_powerpc): Revise for second (VLE) opcode table.
	(print_insn_powerpc): Likewise.
	* ppc-opc.c: Likewise.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
	    Rhonda Wittels  <rhonda@codesourcery.com>
	    Nathan Froyd <froydnj@codesourcery.com>

	opcodes/
	* ppc-opc.c (insert_arx, extract_arx): New functions.
	(insert_ary, extract_ary): New functions.
	(insert_li20, extract_li20): New functions.
	(insert_rx, extract_rx): New functions.
	(insert_ry, extract_ry): New functions.
	(insert_sci8, extract_sci8): New functions.
	(insert_sci8n, extract_sci8n): New functions.
	(insert_sd4h, extract_sd4h): New functions.
	(insert_sd4w, extract_sd4w): New functions.
	(insert_vlesi, extract_vlesi): New functions.
	(insert_vlensi, extract_vlensi): New functions.
	(insert_vleui, extract_vleui): New functions.
	(insert_vleil, extract_vleil): New functions.
 	(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
 	(BI16, BI32, BO32, B8): New.
	(B15, B24, CRD32, CRS): New.
 	(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
	(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
	(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
	(SH6_MASK): Use PPC_OPSHIFT_INV.
	(SI8, UI5, OIMM5, UI7, BO16): New.
	(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
	(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
	(ALLOW8_SPRG): New.
	(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
	(OPVUP, OPVUP_MASK OPVUP): New
	(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
	(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
	(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
	(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
 	(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
	(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
	(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
	(SE_IM5, SE_IM5_MASK): New.
	(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
	(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
	(BO32DNZ, BO32DZ): New.
	(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
	(PPCVLE): New.
	(powerpc_opcodes): Add new VLE instructions.  Update existing
	instruction to include PPCVLE if supported.
	* ppc-dis.c (ppc_opts): Add vle entry.
	(get_powerpc_dialect): New function.
	(powerpc_init_dialect): VLE support.
	(print_insn_big_powerpc): Call get_powerpc_dialect.
	(print_insn_little_powerpc): Likewise.
	(operand_value_powerpc): Handle negative shift counts.
	(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 19:45:30 +00:00
H.J. Lu 56e63005cd Remove x32 addend overflow for BFD_RELOC_64
gas/

	* config/tc-i386.c (tc_gen_reloc): Remove x32 addend overflow
	for BFD_RELOC_64.

gas/testsuite/

	* gas/i386/ilp32/ilp32.exp: Don't run reloc64-inval.

	* gas/i386/ilp32/reloc64.s: Add test for -4294967295 addend.
	* gas/i386/ilp32/reloc64.d: Updated.

	* gas/i386/ilp32/reloc64-inval.l: Removed.
	* gas/i386/ilp32/reloc64-inval.s: Likewise.
2012-05-12 12:34:37 +00:00
Nick Clifton 99700d6feb PR 13503
* reloc.c: Add new ENUM for BFD_RELOC_AVR_8_LO,
	BFD_RELOC_AVR_8_HI, BFD_RELOC_AVR_8_HHI.
	* bfd-in2.h: Regenerate.
	* libbfd.h: Regenrate.
	* elf32-avr.c (elf_avr_howto_table): Add entries for
	R_AVR_8_LO8, R_AVR_8_HI8, R_AVR_8_HHI8.
	(avr_reloc_map): Add RELOC mappings for R_AVR_8_LO8, R_AVR_8_HI8,
	R_AVR_8_HHI8.

	* config/tc-avr.c (exp_mod_pm): Remove variable.
	(exp_mod_data_t): New typedef.
	(pexp_mod_data, exp_mod_data): New variables.
	(avr_parse_cons_expression): Scan through exp_mod_data[] to find
	data expression modifiers "pm", "gs", "lo8", hi8", "hhi8", "hh8"
	and set pexp_mod_data accordingly to be used in avr_cons_fix_new.
	(avr_cons_fix_new): Handle new data expression modifiers shipped
	in pexp_mod_data.
	(md_apply_fix): Handle BFD_RELOC_AVR_8_LO, BFD_RELOC_AVR_8_HI,
	BFD_RELOC_AVR_8_HHI.

	* elf/avr.h (RELOC_NUMBERS): Add values for R_AVR_8_LO8,
	R_AVR_8_HI8, R_AVR_8_HHI8.
2012-05-11 12:59:23 +00:00
H.J. Lu 268a8d3ac4 Use int and bfd_signed_vma in x32 addend overflow check
bfd/

	* elf64-x86-64.c (elf_x86_64_relocate_section): Use int in x32
	addend overflow check.

gas/

	* config/tc-i386.c (tc_gen_reloc): Use bfd_signed_vma in x32
	addend overflow check.
2012-05-11 00:50:43 +00:00
H.J. Lu 6f2c9068ed Display signed hex number in x32 addend overflow check
bfd/

	* elf64-x86-64.c (elf_x86_64_relocate_section): Display signed
	hex number in x32 addend overflow check.

gas/

	* config/tc-i386.c (tc_gen_reloc): Display signed hex number in
	x32 addend overflow check.

ld/testsuite/

	* ld-x86-64/ilp32-11.d: Updated.
2012-05-10 20:46:34 +00:00
H.J. Lu 83acd3e879 Use fits_in_signed_long to check x32 addend overflow
* config/tc-i386.c (tc_gen_reloc): Use fits_in_signed_long.
2012-05-10 03:48:33 +00:00
H.J. Lu 8cf0d2dd21 Check 64-bit relocation addend overflow for x32
bfd/

	* elf64-x86-64.c (elf_x86_64_relocate_section): Check addend
	overflow for R_X86_64_RELATIVE64.

gas/

	* config/tc-i386.c (tc_gen_reloc): Check x32 addend overflow
	for BFD_RELOC_64.

gas/testsuite/

	* gas/i386/ilp32/ilp32.exp: Run reloc64-inval.

	* gas/i386/ilp32/reloc64.s: Add tests for ".quad".
	* gas/i386/ilp32/reloc64.d: Updated.

	* gas/i386/ilp32/reloc64-inval.l: New file.
	* gas/i386/ilp32/reloc64-inval.s: Likewise.

ld/testsuite/

	* ld-x86-64/ilp32-11.d: New file.
	* ld-x86-64/ilp32-11.s: Likewise.

	* ld-x86-64/x86-64.exp: Run ilp32-11.
2012-05-10 03:25:17 +00:00
Arnold Metselaar 25045f7922 2012-05-06 Arnold Metselaar <arnold_m@operamail.com>
* config/tc-z80.h(md_register_arithmetic): Define as 0.
	* config/tc-z80.c(md_begin): Store register names in symbol table, prevents usage as ordinary symbol.
	* config/tc-z80.c(contains_register): New function.
	* config/tc-z80.c(parse_exp2): Removed.
	* config/tc-z80.c(parse_exp_not_indexed): New function.
	* config/tc-z80.c(parse_exp): Add code to recogize indexed addressing after parsing.
	* config/tc-z80.c(emit_byte, emit_word): Use contains_register.
	* config/tc-z80.c(emit_jp): Use parse_exp_not_indexed, simplify condition for jump to register.
	* config/tc-z80.c(emit_call, emit_jr, emit_ex, emit_rst): Use parse_exp_not_indexed.
2012-05-06 09:49:21 +00:00
Alan Modra 45dfa85a1e Replace all uses of bfd_abs_section, bfd_com_section, bfd_und_section
and bfd_ind_section with their _ptr variants, or use corresponding
bfd_is_* macros.
2012-05-05 03:05:32 +00:00
H.J. Lu 35262a230c Add `instruction' to unsupported error message
* config/tc-i386.c (match_template): Add `instruction' to
	unsupported error message.
2012-05-04 19:18:02 +00:00
H.J. Lu 89e71f5c88 Reformat output_insn
* config/tc-i386.c (output_insn): Reformat.
2012-05-04 19:11:04 +00:00
H.J. Lu ae5c1c7b1d Remove the extra VEX check
* config/tc-i386.c (output_insn): Remove the extra VEX check.
2012-05-04 18:06:38 +00:00
H.J. Lu 10efe3f6ab Improve unsupported error message
* config/tc-i386.c (match_template): Improve unsupported error
	message.
2012-05-04 17:55:38 +00:00
Nick Clifton f6c1a2d592 Add support for Motorola XGATE embedded CPU 2012-05-03 13:12:08 +00:00
DJ Delorie cad335c901 * config/rx-parse.y (rx_intop): Add parameter for operation size.
Check for large positive constants really being small negative
ones.
(BRA, BSR): Update calls to rx_intop.
(immediate): Likewise.
2012-04-30 22:09:09 +00:00
Mark Wielaard 88ebb0a156 gas: Make dwarf2dbg.c versions specific and add DW_AT_high_pc case for DWARF 4+.
* dwarf2dbg.c (DWARF2_ARANGES_VERSION): New define to 2.
    (DWARF2_LINE_VERSION): Likewise.
    (out_debug_line): Use DWARF2_LINE_VERSION not DWARF2_VERSION.
    (out_debug_aranges): Use DWARF2_ARANGES_VERSION not DWARF2_VERSION.
    (out_debug_abbrev): Use DW_FORM_data for DW_AT_high_pc when
    DWARF2_VERSION >= 4.
    (out_debug_info): Use difference between start and end as data
    value for DW_AT_high_pc when DWARF2_VERSION >= 4.
    * config/tc-ia64.h (DWARF2_LINE_VERSION): Override it.
2012-04-30 14:32:28 +00:00
David S. Miller 2e52845baf Add support for sparc %cfr ASR register.
opcodes/

	* sparc-dis.c (v9a_asr_reg_names): Add 'cfr'.
	* sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr.

gas/

	* config/tc-sparc.c (v9a_asr_table): Add 'cfr'.

gas/testsuite/

	* gas/sparc/sparc.exp: Run cfr test.
	* gas/sparc/cfr.s: New testcase.
	* gas/sparc/cfr.d: Likewise.
2012-04-27 20:43:35 +00:00
David S. Miller 58004e23c9 Add support for sparc pause instruction.
opcodes/

	* sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'.
	* sparc-dis.c (v9a_asr_reg_names): Add 'pause'.

gas/

	* config/tc-sparc.c (sparc_arch_table): Add HWCAP_PAUSE to sparc4,
	v8pluse, v8plusv, v9e, and v9v.
	(v9a_asr_table): Add 'pause'.

gas/testsuite/

	* gas/sparc/sparc.exp: Run pause test.
	* gas/sparc/pause.s: New testcase.
	* gas/sparc/pause.d: Likewise.
2012-04-27 18:04:00 +00:00
David S. Miller 698544e152 Add support for sparc compare-and-branch instructions.
opcodes/

	* sparc-opc.c (CBCOND): New define.
	(CBCOND_XCC): Likewise.
	(cbcond): New helper macro.
	(sparc_opcodes): Add compare-and-branch instructions.

gas/

	* config/tc-sparc.c (sparc_arch_table): Add HWCAP_CBCOND to
	sparc4, v8pluse, v8plusv, v9e, and v9v.
	(sparc_ip): Handle R_SPARC_5 of immediate constants inline in
	order to accomodate cbcond which otherwise would require two
	relocations to be handled in a single instruction..

gas/testsuite/

	* gas/sparc/cbcond.s: New file.
	* gas/sparc/cbcond.d: New file.
	* gas/sparc/sparc.exp: Run cbcond test.
2012-04-27 18:03:13 +00:00
David S. Miller 6cda13266f Add support for SPARC T4 crypto instructions.
include/opcode/

	* sparc.h: Document new arg code' )' for crypto RS3
	immediates.

opcodes/

	* sparc-dis.c (print_insn_sparc): Handle ')'.
	* sparc-opc.c (sparc_opcodes): Add crypto instructions.

gas/

	* config/tc-sparc.c (sparc_ip): Likewise.  Accept instruction
	names containing "_".
	(sparc_arch_table): Add sparc4, v8pluse, and v9e.  Add crypto
	hwcap masks to v8plusv and v9v.

gas/testsuite/

	* gas/sparc/crypto.s: New file.
	* gas/sparc/crypto.d: New file.
	* gas/sparc/sparc.exp: Run crypto test.
2012-04-27 18:02:35 +00:00
David S. Miller ec668d69b9 Move sparc opcode hwcaps out of sparc_opcode flags field.
include/opcode/

	* sparc.h (struct sparc_opcode): New field 'hwcaps'.
	F_MUL32, F_DIV32, F_FDMULD, F_V8PLUS, F_POPC, F_VIS, F_VIS2,
	F_ASI_BLK_INIT, F_FMAF, F_VIS3, F_HPC, F_RANDOM, F_TRANS,
	F_FJFMAU, F_IMA, F_ASI_CACHE_SPARING, F_HWCAP_MASK): Delete.
	(HWCAP_MUL32, HWCAP_DIV32, HWCAP_FSMULD, HWCAP_V8PLUS, HWCAP_POPC,
	HWCAP_VIS, HWCAP_VIS2, HWCAP_ASI_BLK_INIT, HWCAP_FMAF,
	HWCAP_VIS3, HWCAP_HPC, HWCAP_RANDOM, HWCAP_TRANS, HWCAP_FJFMAU,
	HWCAP_IMA, HWCAP_ASI_CACHE_SPARING, HWCAP_AES, HWCAP_DES,
	HWCAP_KASUMI, HWCAP_CAMELLIA, HWCAP_MD5, HWCAP_SHA1,
	HWCAP_SHA256, HWCAP_SHA512, HWCAP_MPMUL, HWCAP_MONT, HWCAP_PAUSE,
	HWCAP_CBCOND, HWCAP_CRC32): New defines.

opcodes/

	* sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
	into new struct sparc_opcode 'hwcaps' field instead of 'flags'.

gas/

	* config/tc-sparc.c (sparc_arch_table): Rework to use HWCAP_*
	masks.
	(sparc_md_end): No longer need to translate hwcap_seen values into
	ELF hwcap bits, they now match exactly.
	(get_hwcap_name): Use HWCAP_* and handle new values.
	(sparc_ip): Fetch hwcaps from insn->hwcaps instead of insn->flags.
2012-04-27 18:01:35 +00:00
Tristan Gingold 2b0bc50148 2012-04-20 Tristan Gingold <gingold@adacore.com>
* config/tc-ia64.c (obj_elf_vms_common): New function.
	(md_pseudo_table): Add .vms_common pseudo.
	* config/obj-elf.h (obj_elf_section_name): Add a prototype.
	* config/obj-elf.c (obj_elf_section_name): Make it public.
2012-04-20 10:21:33 +00:00
Richard Sandiford 0b649256e3 gas/
* config/tc-avr.c (md_apply_fix): Fix handling of BFD_RELOC32.
2012-04-17 13:59:41 +00:00
David S. Miller 2615994e91 Support R_SPARC_WDISP10 and R_SPARC_H34.
include/

	* elf/sparc.h (R_SPARC_WDISP10): New reloc.
	* opcode/sparc.h: Define '=' as generating R_SPARC_WDISP10.

opcodes/

	* sparc-dis.c (X_DISP10): Define.
	(print_insn_sparc): Handle '='.

bfd/

	* reloc.c (BFD_RELOC_SPARC_H34, BFD_RELOC_SPARC_SIZE32,
	BFD_RELOC_SPARC_SIZE64, BFD_RELOC_SPARC_WDISP10): New relocs.
	* libbfd.h: Regenerate.
	* bfd-in2.h: Likewise.
	* elfxx-sparc.c (sparc_elf_wdisp10_reloc): New function.
	(_bfd_sparc_elf_howto_table): Add entries for R_SPARC_H34,
	R_SPARC_SIZE32, R_SPARC_64, and R_SPARC_WDISP10.
	(_bfd_sparc_elf_reloc_type_lookup): Handle new relocs.
	(_bfd_sparc_elf_check_relocs): Likewise.
	(_bfd_sparc_elf_gc_sweep_hook): Likewise.
	(_bfd_sparc_elf_relocate_section): Likewise.

gas/

	* config/tc-sparc.c (sparc_ip): Handle '=', "%h34", "%l34", and
	BFD_RELOC_SPARC_H34.
	(md_apply_fix): Handle BFD_RELOC_SPARC_WDISP10 and BFD_RELOC_SPARC_H34.
	(tc_gen_reloc): Likewise.

gas/testsuite/

	* gas/sparc/reloc64.s: Add abs34 code model tests.
	* gas/sparc/reloc64.d: Update.

elfcpp/

	* sparc.h (R_SPARC_WDISP10): New relocation.

gold/

	* sparc.cc (Reloc::wdisp10): New relocation method.
	(Reloc::h34): Likewise.
	(Target_sparc::Scan::check_non_pic): Handle R_SPARC_H34.
	(Target_sparc::Scan::get_reference_flags): Handle R_SPARC_H34 and
	R_SPARC_WDISP10.
	(Target_sparc::Scan::local): Likewise.
	(Target_sparc::Scan::global): Likewise.
	(Target_sparc::Relocate::relocate): Likewise.
2012-04-12 16:26:06 +00:00
Nick Clifton b38cadfb70 * elf32-arm.c (elf32_arm_nacl_plt0_entry, elf32_arm_nacl_plt_entry):
New variables.
	(struct elf32_arm_link_hash_table): New member `nacl_p'.
	(elf32_arm_link_hash_table_create): Initialize it.
	(elf32_arm_nacl_link_hash_table_create): New function.
	(arm_movw_immediate, arm_movt_immediate): New functions.
	(elf32_arm_populate_plt_entry): Test HTAB->nacl_p.
	(elf32_arm_finish_dynamic_sections): Likewise.
	(elf32_arm_output_plt_map_1): Likewise.
	(bfd_elf32_littlearm_nacl_vec, bfd_elf32_bigarm_nacl_vec):
	New backend vector stanza.
	(elf32_arm_nacl_modify_segment_map): New function.
	* config.bfd: Handle arm-*-nacl*, armeb-*-nacl*.
	* targets.c: Support bfd_elf32_{big,little}_nacl_vec.
	* configure.in: Likewise.
	(bfd_elf32_bigarm_nacl_vec): Add elf-nacl.lo here.
	(bfd_elf32_littlearm_nacl_vec): Likewise.
	(bfd_elf32_bigarm_vec, bfd_elf32_littlearm_vec): Likewise.
	(bfd_elf32_bigarm_symbian_vec): Likewise.
	(bfd_elf32_littlearm_symbian_vec): Likewise.
	(bfd_elf32_bigarm_vxworks_vec): Likewise.
	(bfd_elf32_littlearm_vxworks_vec): Likewise.
	* configure: Regenerated.

	* configure.tgt (arm-*-nacl*): Match it.
	* config/te-nacl.h (FPU_DEFAULT, EABI_DEFAULT): Define.
	(LOCAL_LABELS_DOLLAR): Define.
	* config/tc-arm.c (elf32_arm_target_format) [TE_NACL]:
	Use nacl format variants.

	* gas/elf/elf.exp (run_elf_list_test): Treat arm-*-nacl* targets
	as -armeabi.

	* gas/arm/any-idiv.d: Match *-*-nacl* targets too.
	* gas/arm/arch4t.d: Likewise.
	* gas/arm/arch4t-eabi.d: Likewise.
	* gas/arm/attr-any-armv4t.d: Likewise.
	* gas/arm/attr-any-thumbv6.d: Likewise.
	* gas/arm/attr-cpu-directive.d: Likewise.
	* gas/arm/attr-default.d: Likewise.
	* gas/arm/attr-march-all.d: Likewise.
	* gas/arm/attr-march-armv1.d: Likewise.
	* gas/arm/attr-march-armv2a.d: Likewise.
	* gas/arm/attr-march-armv2.d: Likewise.
	* gas/arm/attr-march-armv2s.d: Likewise.
	* gas/arm/attr-march-armv3.d: Likewise.
	* gas/arm/attr-march-armv3m.d: Likewise.
	* gas/arm/attr-march-armv4.d: Likewise.
	* gas/arm/attr-march-armv4t.d: Likewise.
	* gas/arm/attr-march-armv4txm.d: Likewise.
	* gas/arm/attr-march-armv4xm.d: Likewise.
	* gas/arm/attr-march-armv5.d: Likewise.
	* gas/arm/attr-march-armv5t.d: Likewise.
	* gas/arm/attr-march-armv5te.d: Likewise.
	* gas/arm/attr-march-armv5tej.d: Likewise.
	* gas/arm/attr-march-armv5texp.d: Likewise.
	* gas/arm/attr-march-armv5txm.d: Likewise.
	* gas/arm/attr-march-armv6.d: Likewise.
	* gas/arm/attr-march-armv6j.d: Likewise.
	* gas/arm/attr-march-armv6k.d: Likewise.
	* gas/arm/attr-march-armv6k+sec.d: Likewise.
	* gas/arm/attr-march-armv6kt2.d: Likewise.
	* gas/arm/attr-march-armv6-m.d: Likewise.
	* gas/arm/attr-march-armv6-m+os.d: Likewise.
	* gas/arm/attr-march-armv6s-m.d: Likewise.
	* gas/arm/attr-march-armv6t2.d: Likewise.
	* gas/arm/attr-march-armv6z.d: Likewise.
	* gas/arm/attr-march-armv6zk.d: Likewise.
	* gas/arm/attr-march-armv6zkt2.d: Likewise.
	* gas/arm/attr-march-armv6zt2.d: Likewise.
	* gas/arm/attr-march-armv7-a.d: Likewise.
	* gas/arm/attr-march-armv7a.d: Likewise.
	* gas/arm/attr-march-armv7-a+idiv.d: Likewise.
	* gas/arm/attr-march-armv7-a+mp.d: Likewise.
	* gas/arm/attr-march-armv7-a+sec.d: Likewise.
	* gas/arm/attr-march-armv7-a+sec+virt.d: Likewise.
	* gas/arm/attr-march-armv7-a+virt.d: Likewise.
	* gas/arm/attr-march-armv7.d: Likewise.
	* gas/arm/attr-march-armv7em.d: Likewise.
	* gas/arm/attr-march-armv7-m.d: Likewise.
	* gas/arm/attr-march-armv7m.d: Likewise.
	* gas/arm/attr-march-armv7-r.d: Likewise.
	* gas/arm/attr-march-armv7r.d: Likewise.
	* gas/arm/attr-march-armv7-r+mp.d: Likewise.
	* gas/arm/attr-march-iwmmxt2.d: Likewise.
	* gas/arm/attr-march-iwmmxt.d: Likewise.
	* gas/arm/attr-march-xscale.d: Likewise.
	* gas/arm/attr-mcpu.d: Likewise.
	* gas/arm/attr-mfpu-arm1020e.d: Likewise.
	* gas/arm/attr-mfpu-arm1020t.d: Likewise.
	* gas/arm/attr-mfpu-arm1136jf-s.d: Likewise.
	* gas/arm/attr-mfpu-arm1136jfs.d: Likewise.
	* gas/arm/attr-mfpu-arm7500fe.d: Likewise.
	* gas/arm/attr-mfpu-fpa10.d: Likewise.
	* gas/arm/attr-mfpu-fpa11.d: Likewise.
	* gas/arm/attr-mfpu-fpa.d: Likewise.
	* gas/arm/attr-mfpu-fpe2.d: Likewise.
	* gas/arm/attr-mfpu-fpe3.d: Likewise.
	* gas/arm/attr-mfpu-fpe.d: Likewise.
	* gas/arm/attr-mfpu-maverick.d: Likewise.
	* gas/arm/attr-mfpu-neon.d: Likewise.
	* gas/arm/attr-mfpu-neon-fp16.d: Likewise.
	* gas/arm/attr-mfpu-softfpa.d: Likewise.
	* gas/arm/attr-mfpu-softvfp.d: Likewise.
	* gas/arm/attr-mfpu-softvfp+vfp.d: Likewise.
	* gas/arm/attr-mfpu-vfp10.d: Likewise.
	* gas/arm/attr-mfpu-vfp10-r0.d: Likewise.
	* gas/arm/attr-mfpu-vfp3.d: Likewise.
	* gas/arm/attr-mfpu-vfp9.d: Likewise.
	* gas/arm/attr-mfpu-vfp.d: Likewise.
	* gas/arm/attr-mfpu-vfpv2.d: Likewise.
	* gas/arm/attr-mfpu-vfpv3-d16.d: Likewise.
	* gas/arm/attr-mfpu-vfpv3.d: Likewise.
	* gas/arm/attr-mfpu-vfpv4-d16.d: Likewise.
	* gas/arm/attr-mfpu-vfpv4.d: Likewise.
	* gas/arm/attr-mfpu-vfpxd.d: Likewise.
	* gas/arm/attr-names.d: Likewise.
	* gas/arm/attr-order.d: Likewise.
	* gas/arm/attr-override-cpu-directive.d: Likewise.
	* gas/arm/attr-override-mcpu.d: Likewise.
	* gas/arm/got_prel.d: Likewise.
	* gas/arm/mapdir.d: Likewise.
	* gas/arm/mapmisc.d: Likewise.
	* gas/arm/mapsecs.d: Likewise.
	* gas/arm/mapshort-eabi.d: Likewise.
	* gas/arm/mapshort-elf.d: Likewise.
	* gas/arm/mov-highregs-any.d: Likewise.
	* gas/arm/mov-lowregs-any.d: Likewise.
	* gas/arm/pr12198-1.d: Likewise.
	* gas/arm/pr12198-2.d: Likewise.
	* gas/arm/thumb.d: Likewise.
	* gas/arm/thumb-eabi.d: Likewise.
	* gas/arm/thumbrel.d: Likewise.

	* configure.tgt (arm*-*-nacl*, arm*b-*-nacl*): Handle them.
	* emulparams/armelf_nacl.sh: New file.
	* emulparams/armelfb_nacl.sh: New file.
	* Makefile.am (ALL_EMULATION_SOURCES): Add earmelf_nacl.c
	and earmelfb_nacl.c here.
	(earmelf_nacl.c, earmelfb_nacl.c): New targets.
	* Makefile.in: Regenerated.

	* ld-arm/arm-elf.exp (armelftests): Split out into ...
	(armelftests_common, armelftests_nonacl): ... these two.
	(armeabitests): Split out into ...
	(armeabitests_common, armeabitests_nonacl): ... these two.
	Omit _nonacl sets for arm*-*-nacl* targets.

	* ld-arm/farcall-mix.d: Don't match exact addresses, only symbolic ones.
	* ld-arm/farcall-mix2.d: Likewise.
	* ld-arm/farcall-group.d: Likewise.

	* ld-arm/tls-gdesc-got.d: Match variant file formats too.
	Accept some variation in exact addresses.

	* ld-arm/thumb2-b-interwork.d: Match variant file formats too.
	Fix regexps not to care about exact addresses where not relevant.

	* ld-arm/thumb2-bl-undefweak.d: Match any hex strings, not any
	strings of particular exact lengths.
	* ld-arm/thumb2-bl-undefweak1.d: Likewise.

	* ld-arm/arm-app.r: Match variant file formats too.
	* ld-arm/arm-app-abs32.r: Likewise.
	* ld-arm/arm-lib.d: Likewise.
	* ld-arm/arm-lib.r: Likewise.
	* ld-arm/arm-static-app.r: Likewise.
	* ld-arm/armv4-bx.d: Likewise.
	* ld-arm/data-only-map.d: Likewise.
	* ld-arm/group-relocs.d: Likewise.
	* ld-arm/jump19.d: Likewise.
	* ld-arm/reloc-boundaries.d: Likewise.
	* ld-arm/thumb1-bl.d: Likewise.
	* ld-arm/thumb2-bl.d: Likewise.
	* ld-arm/tls-app.d: Likewise.
	* ld-arm/tls-app.r: Likewise.
	* ld-arm/tls-gdierelax.d: Likewise.
	* ld-arm/tls-gdierelax2.d: Likewise.
	* ld-arm/tls-gdlerelax.d: Likewise.
	* ld-arm/tls-lib.d: Likewise.
	* ld-arm/tls-lib.r: Likewise.
	* ld-arm/tls-mixed.r: Likewise.
	* ld-arm/vfp11-fix-none.d: Likewise.
	* ld-arm/vfp11-fix-scalar.d: Likewise.
	* ld-arm/vfp11-fix-vector.d: Likewise.
	* ld-arm/arm-static-app.d: Likewise.
	Fix regexps not to care about exact number of leading spaces.
	* ld-arm/arm-app-abs32.d: Likewise.
	* ld-arm/fix-arm1176-off.d: Likewise.
	* ld-arm/fix-arm1176-on.d: Likewise.

	* ld-arm/arm-elf.exp: Treat nacl targets like eabi targets.
2012-04-12 13:01:15 +00:00
Nick Clifton 6530b175a1 * config/tc-arm.c (only_one_reg_in_list): New function.
(encode_ldmstm): Ditto.
	(do_ldmstm): Use a different encoding when pushing or poping
	a single register.
	(A_COND_MASK): New macro.
	(A_PUSH_POP_OP_MASK): Ditto.
	(A1_OPCODE_PUSH): Ditto.
	(A2_OPCODE_PUSH): Ditto.
	(A2_OPCODE_POP): Ditto.

	* gas/arm/push-pop.d: New testcase.
	* gas/arm/push-pop.s: Ditto.
	* gas/arm/stm-ldm.d: Ditto.
	* gas/arm/stm-ldm.s: Ditto.
2012-04-12 07:46:54 +00:00
DJ Delorie e91a22cece * config/rx-parse.y: Make the .L optional for ADC and SBB. 2012-04-03 19:06:40 +00:00
DJ Delorie b1c0804b2e * config/rx-parse.y: IMM->IMM_, take an extra parameter for the
transfer size.
(IMM): New, call IMM_ with the default 32.
(IMMW,IMMB): Likewise, for 16 and 8.
(NIMM, MBIMM): Add size parameter.
(immediate): Likewise.  Allow 32768..65535 for 16-bit transfers.
(MOV.W): Use IMMW instead of IMM.

* config/rx-parse.y (ADC,SBB): ADC and SBB only allow .L.
(op_dp20_rm_l): New.
(op_dp20_rim_l): New.

* config/rx-parse.y (op_dp20_rms): Rename to op_dp20_rr, don't allow mem.
(ABS, NEG, NOT): These only take REG or REG,REG (rr, not rms).


* gas/rx/mov.d: Update patterns for fixed MOV.W encoding.
2012-04-03 03:01:57 +00:00
Matthew Gretton-Dann ce32bd10df 2012-03-29 Terry Guo <terry.guo@arm.com>
* gas/config/tc-arm.c (arm_cpus): Add cortex-m0plus.
	* gas/doc/c-arm.texi (ARM Options): Document -mcpu=cortex-m0plus.
2012-03-29 10:28:40 +00:00
Maxim Kuvyrkov 55a36193d8 gas/
* config/tc-mips.c (mips_cpu_info_table): Add entry for Broadcom XLP.
	* doc/c-mips.texi: Mention XLP.

	opcodes/
	* mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
2012-03-24 01:09:28 +00:00
Thomas Schwinge 32b9ff0d14 gas/
[SH] Support the .uaquad and .8byte directives also for non-sh64
	configurations.

	* config/tc-sh.c (sh_cons_fix_new, md_apply_fix) [!HAVE_SH64]: Handle
	BFD_RELOC_64.
	* doc/c-sh64.texi (SH64 Machine Directives): Move .uaquad
	description...
	* doc/c-sh.texi (SH Machine Directives): ... here.
2012-03-21 08:58:40 +00:00
Nick Clifton 7465e07a57 * config/tc-arm.c (do_vmrs): Accept priviledged mode VFP system
registers.
	(do_vmsr): Likewise.
	(arm_opcode_insns): Do not default to using the FPSCR register in
	the VMRS and VMSR registers.

	* gas/arm/vfp1xD.s: Add tests of the VMSR ad VMRS instructions in
	priviledged modes.
	* gas/arm/vfp1xD.d: Update expected output.
2012-03-20 11:55:07 +00:00
Roland McGrath 8059fb196e bfd/
2012-03-16  Roland McGrath  <mcgrathr@google.com>

	* config.bfd: Handle x86_64-*-nacl*.
	* elf64-x86-64.c (bfd_elf64_x86_64_nacl_vec): New backend vector stanza.
	(bfd_elf32_x86_64_nacl_vec): Likewise.
	* targets.c: Support them.
	* configure.in: Likewise.
	* configure: Regenerated.

gas/
2012-03-16  Roland McGrath  <mcgrathr@google.com>

	* config/tc-i386.h [TE_NACL] (ELF_TARGET_FORMAT32, ELF_TARGET_FORMAT64):
	Define for this case.
	* configure.tgt (i386-*-nacl*): If ${cpu} is x86_64*, default to x32.
2012-03-16 23:19:47 +00:00
Matthew Gretton-Dann 692392805b * gas/config/tc-arm.c (aeabi_set_public_attributes): Correct
handling of Tag_DIV_use.
	* gas/testsuite/gas/testsuite/gas/arm/any-idiv.d: New testcase.
	* gas/testsuite/gas/testsuite/gas/arm/any-idiv.s: Likewise.
	* gas/testsuite/gas/arm/attr-any-armv4t.d: Update expected output.
	* gas/testsuite/gas/arm/attr-any-thumbv6.d: Likewise.
	* gas/testsuite/gas/arm/attr-cpu-directive.d: Likewise.
	* gas/testsuite/gas/arm/attr-default.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv1.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv2.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv2a.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv2s.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv3.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv3m.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv4.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv4t.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv4txm.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv4xm.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv5.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv5t.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv5te.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv5tej.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv5texp.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv5txm.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6-m+os.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6-m.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6j.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6k+sec.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6k.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6kt2.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6s-m.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6t2.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6z.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6zk.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6zkt2.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv6zt2.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv7-a+mp.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv7-a+sec.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv7-a.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv7.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-armv7a.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-iwmmxt.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-iwmmxt2.d: Likewise.
	* gas/testsuite/gas/arm/attr-march-xscale.d: Likewise.
	* gas/testsuite/gas/arm/attr-mcpu.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-arm1020e.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-arm1020t.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-arm1136jf-s.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-arm1136jfs.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-arm7500fe.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-fpa.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-fpa10.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-fpa11.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-fpe.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-fpe2.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-fpe3.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-maverick.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-neon-fp16.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-neon.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-softfpa.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-softvfp+vfp.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-softvfp.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-vfp.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-vfp10-r0.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-vfp10.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-vfp3.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-vfp9.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-vfpv2.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-vfpv3-d16.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-vfpv3.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-vfpv4-d16.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-vfpv4.d: Likewise.
	* gas/testsuite/gas/arm/attr-mfpu-vfpxd.d: Likewise.
	* gas/testsuite/gas/arm/attr-order.d: Likewise.
	* gas/testsuite/gas/arm/attr-override-cpu-directive.d: Likewise.
	* gas/testsuite/gas/arm/attr-override-mcpu.d: Likewise.
	* gas/testsuite/gas/arm/eabi_attr_1.d: Likewise.
	* gas/testsuite/gas/arm/mov-highregs-any.d: Likewise.
	* gas/testsuite/gas/arm/mov-lowregs-any.d: Likewise.
	* gas/testsuite/gas/arm/pr12198-1.d: Likewise.
	* gas/testsuite/gas/arm/pr12198-2.d: Likewise.
	* ld/testsuite/ld-arm/arm-elf.exp: Add new testcases.
	* ld/testsuite/ld-arm/attr-merge-2.attr: Update ouput.
	* ld/testsuite/ld-arm/attr-merge-2a.s: Remove Tag_DIV_use test.
	* ld/testsuite/ld-arm/attr-merge-2b.s: Likewise.
	* ld/testsuite/ld-arm/attr-merge-3.attr: Updated expected output.
	* ld/testsuite/ld-arm/attr-merge-4.attr: Likewise.
	* ld/testsuite/ld-arm/attr-merge-5.attr: Likewise.
	* ld/testsuite/ld-arm/attr-merge-6.attr: Likewise.
	* ld/testsuite/ld-arm/attr-merge-7.attr: Likewise.
	* ld/testsuite/ld-arm/attr-merge-arch-1.attr: Likewise.
	* ld/testsuite/ld-arm/attr-merge-arch-2.attr: Likewise.
	* ld/testsuite/ld-arm/attr-merge-unknown-2.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-unknown-2r.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-unknown-3.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-1.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-1r.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-2.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-2r.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-3.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-3r.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-4.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-4r.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-5.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-5r.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-6.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-vfp-6r.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-00-nowarn.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-00.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-02-nowarn.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-02.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-04-nowarn.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-04.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-20-nowarn.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-20.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-22-nowarn.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-22.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-24-nowarn.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-40-nowarn.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-40.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-42-nowarn.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-44-nowarn.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-wchar-44.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge.attr: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-0.s: New testcase.
	* ld/testsuite/ld-arm/attr-merge-div-00.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-01-m3.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-01.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-02.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-1.s: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-10-m3.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-10.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-11.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-12.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-120.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-2.s: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-20.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-21.d: Likewise.
	* ld/testsuite/ld-arm/attr-merge-div-22.d: Likewise.
2012-03-16 14:02:33 +00:00
Roland McGrath fa94de6b5c gas/
2012-03-12  Roland McGrath  <mcgrathr@google.com>

	* config/tc-arm.c (arm_frag_max_var): New function.
	* config/tc-arm.h: Declare it.
	(md_frag_max_var): New macro.

	* config/tc-i386.c (i386_frag_max_var): New function.
	* config/tc-i386.h: Declare it.
	(md_frag_max_var): New macro.

	* doc/as.texinfo (Bundle directives): New node.
	(Pseudo Ops): Add it to the menu.
	* NEWS: Mention new feature.
	* read.c [md_frag_max_var] (HANDLE_BUNDLE): New macro.
	[HANDLE_BUNDLE] (bundle_align_p2): New variable.
	[HANDLE_BUNDLE] (bundle_lock_frchain, bundle_lock_frag): New variables.
	[HANDLE_BUNDLE] (start_bundle, pending_bundle_size, finish_bundle):
	New functions.
	(assemble_one): New function if [HANDLE_BUNDLE], #define directly
	to md_assembly if not.
	(read_a_source_file): Call assemble_one in place of md_assemble.
	(read_a_source_file) [HANDLE_BUNDLE]: Check for unterminated
	.bundle_lock at end of processing.
	[HANDLE_BUNDLE] (s_bundle_align_mode, s_bundle_lock, s_bundle_unlock):
	New functions.
	[HANDLE_BUNDLE] (potable): Add their entries.
	* read.h: Declare new functions.

gas/testsuite/
2012-03-12  Roland McGrath  <mcgrathr@google.com>

	* gas/i386/bundle-bad.s: New file.
	* gas/i386/bundle-bad.d: New file.
	* gas/i386/bundle-bad.l: New file.
	* gas/i386/i386.exp: Run it.

	* gas/arm/bundle.s: New file.
	* gas/arm/bundle.d: New file.
	* gas/arm/bundle-lock.s: New file.
	* gas/arm/bundle-lock.d: New file.

	* gas/i386/bundle.s: New file.
	* gas/i386/bundle.d: New file.
	* gas/i386/x86-64-bundle.s: New file.
	* gas/i386/x86-64-bundle.d: New file.
	* gas/i386/bundle-lock.s: New file.
	* gas/i386/bundle-lock.d: New file.
	* gas/i386/i386.exp: Run them.
2012-03-13 16:59:57 +00:00
Alan Modra aea77599d0 include/opcode/
* ppc.h: Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR.
opcodes/
	* ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
	* ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
	(PPCVEC2, PPCTMR, E6500): New short names.
	(powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
	mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
	lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
	lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
	lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
	optional operands on sync instruction for E6500 target.
bfd/
	* archures.c: Add bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
	* bfd-in2.h: Regenerate.
	* cpu-powerpc.c (bfd_powerpc_archs): Add entryies for
	bfd_mach_ppc_e5500 and bfd_mach_ppc_e6500.
gas/
	* config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
	(ppc_handle_align): Add termination nop opcode for e500mc family.
	* doc/as.texinfo: Document options -me5500 and -me6500.
	* doc/c-ppc.texi: Likewise.
gas/testsuite/
	* gas/ppc/e500mc64_nop.s: New test case for e500mc family
	termination nops.
	* gas/ppc/e500mc64_nop.d: Likewise.
	* gas/ppc/e5500_nop.s: Likewise.
	* gas/ppc/e5500_nop.d: Likewise.
	* gas/ppc/e6500_nop.s: Likewise.
	* gas/ppc/e6500_nop.d: Likewise.
	* gas/ppc/e6500.s: New.
	* gas/ppc/e6500.d: Likewise.
	* gas/ppc/ppc.exp: Run e6500, e500mc64_nop, e5500_nop, and e6500_nop.
2012-03-09 23:39:06 +00:00