I noticed gdb.python/python.exp failing on aarch64-elf like so:
FAIL: gdb.python/python.exp: Test decode_line func1 line number
This particular test expects the line number for func1 to be 19, hardcoded.
In my aarch64-elf tests gdb thinks func1 is at line 20, making the test fail.
The following patch addresses this by reading the line number information from
GDB and comparing it against the python decoded symtab information.
gdb/testsuite/ChangeLog:
2017-01-20 Luis Machado <lgustavo@codesourcery.com>
* gdb.python/python.exp: Check line number against what GDB thinks
the line number is for func1.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This fixes offender testcases that have test names starting with uppercase
when using gdb_test_multiple in a single-line construct.
gdb/testsuite/ChangeLog
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
Fix test names starting with uppercase throughout the files.
* gdb.arch/i386-bp_permanent.exp
* gdb.arch/i386-gnu-cfi.exp
* gdb.base/disasm-end-cu.exp
* gdb.base/macscp.exp
* gdb.base/pending.exp
* gdb.base/watch_thread_num.exp
* gdb.cp/exception.exp
* gdb.cp/gdb2495.exp
* gdb.cp/local.exp
* gdb.python/py-evsignal.exp
* gdb.python/python.exp
* gdb.trace/tracecmd.exp
The gdb.decode_line python function is documented to support the same location
expressions as the "break" command. It currently expects a linespec location.
Instead of creating a linespec location directly, create the location via
string_to_event_location_basic.
gdb/ChangeLog:
PR python/18938
* cli/cli-cmds (source_script_fron_sctream): New arg file_to_open.
All callers updated.
gdb/testsuite/ChangeLog:
* gdb.python/python.exp: Add test for symlink from .py file to .notpy
file.
The message displayed when using help() changed a bit with time, so this
adjusts the test accordingly.
gdb/testsuite/ChangeLog:
* gdb.python/python.exp: Change expected reply to help().
The test in gdb.python/python.exp tests "extended-prompt" and expects
working directory is printed. However, working directory on remote
host doesn't have "gdb/testsuite", so the test fails on remote host
like:
set extended-prompt \w ^M
^M
/home/yao FAIL: gdb.python/python.exp: set extended prompt working directory (timeout)
This patch is to get the working directory first, and use it to match
the output of "set extended-prompt \\w ". It works for remote host
and non remote host.
gdb/testsuite:
2014-11-02 Yao Qi <yao@codesourcery.com>
* gdb.python/python.exp: Get working directory and match the
output of "set extended-prompt \\w " with it.
This is more of a readline/terminal issue than a Python one.
PR17372 is a regression in 7.8 caused by the fix for PR17072:
commit 0017922d02
Author: Pedro Alves <palves@redhat.com>
Date: Mon Jul 14 19:55:32 2014 +0100
Background execution + pagination aborts readline/gdb
gdb_readline_wrapper_line removes the handler after a line is
processed. Usually, we'll end up re-displaying the prompt, and that
reinstalls the handler. But if the output is coming out of handling
a stop event, we don't re-display the prompt, and nothing restores the
handler. So the next input wakes up the event loop and calls into
readline, which aborts.
...
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* top.c (gdb_readline_wrapper_line): Tweak comment.
(gdb_readline_wrapper_cleanup): If readline is enabled, reinstall
the input handler callback.
The problem is that installing the input handler callback also preps
the terminal, putting it in raw mode and with echo disabled, which is
bad if we're going to call a command that assumes cooked/canonical
mode, and echo enabled, like in the case of the PR, Python's
interactive shell. Another example I came up with that doesn't depend
on Python is starting a subshell with "(gdb) shell /bin/sh" from a
multi-line command. Tests covering both these examples are added.
The fix is to revert the original fix for PR gdb/17072, and instead
restore the callback handler after processing an asynchronous target
event.
Furthermore, calling rl_callback_handler_install when we already have
some input in readline's line buffer discards that input, which is
obviously a bad thing to do while the user is typing. No specific
test is added for that, because I first tried calling it even if the
callback handler was still installed and that resulted in hundreds of
failures in the testsuite.
gdb/
2014-10-29 Pedro Alves <palves@redhat.com>
PR python/17372
* event-top.c (change_line_handler): Call
gdb_rl_callback_handler_remove instead of
rl_callback_handler_remove.
(callback_handler_installed): New global.
(gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
(gdb_rl_callback_handler_reinstall): New functions.
(display_gdb_prompt): Call gdb_rl_callback_handler_remove and
gdb_rl_callback_handler_install instead of
rl_callback_handler_remove and rl_callback_handler_install.
(gdb_disable_readline): Call gdb_rl_callback_handler_remove
instead of rl_callback_handler_remove.
* event-top.h (gdb_rl_callback_handler_remove)
(gdb_rl_callback_handler_install)
(gdb_rl_callback_handler_reinstall): New declarations.
* infrun.c (reinstall_readline_callback_handler_cleanup): New
cleanup function.
(fetch_inferior_event): Install it.
* top.c (gdb_readline_wrapper_line) Call
gdb_rl_callback_handler_remove instead of
rl_callback_handler_remove.
(gdb_readline_wrapper_cleanup): Don't call
rl_callback_handler_install.
gdb/testsuite/
2014-10-29 Pedro Alves <palves@redhat.com>
PR python/17372
* gdb.python/python.exp: Test a multi-line command that spawns
interactive Python.
* gdb.base/multi-line-starts-subshell.exp: New file.
I see the following fails in the remote host testing we do for mingw32
hosted GDB,
python print (symtab[1][0].symtab)^M
python.c^M
(gdb) FAIL: gdb.python/python.exp: Test decode_line current locationn filename
python print (symtab[1][0].symtab)^M
python.c^M
(gdb) FAIL: gdb.python/python.exp: Test decode_line python.c:26 filename
The test cases doesn't consider remote host and assumes that directory
on build also exists on host. In this patch, we only match file base
name if host is remote, otherwise, match file with dir name.
gdb/testsuite:
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/py-symbol.exp: Match file base name if host is
remote, otherwise match file name with dir name.
* gdb.python/py-symtab.exp: Likewise.
* gdb.python/python.exp: Likewise.
This patch is to clean up various gdb.python/*.exp tests, such as
removing trailing ".*" from the pattern and fix one typo I find during
reading the code.
gdb/testsuite:
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/python.exp: Remove trailing ".*". Fix typo
locationn.
* gdb.python/py-symbol.exp: Remove trailing ".*" in the
pattern.
* gdb.python/py-symtab.exp: Likewise.
Some gdb.python/*.exp tests fail because the .py files aren't copied
to the (remote) host. This patch is to copy needed .py files to host.
Most of gdb.python/*.exp tests do this.
As it is still controversial to delete *.py files on host, we don't do
that in this patch.
gdb/testsuite:
2014-08-22 Yao Qi <yao@codesourcery.com>
* gdb.python/py-finish-breakpoint.exp: Copy .py file to host.
* gdb.python/py-finish-breakpoint2.exp: Likewise.
* gdb.python/python.exp: Likewise. Use .py file on the host
instead of the build.
I noticed that "list" behaves differently in CLI vs MI. Particularly:
$ ./gdb -nx -q ./testsuite/gdb.mi/mi-cli
Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli...done.
(gdb) start
Temporary breakpoint 1 at 0x40054d: file ../../../src/gdb/testsuite/gdb.mi/basics.c, line 62.
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli
Temporary breakpoint 1, main () at ../../../src/gdb/testsuite/gdb.mi/basics.c:62
62 callee1 (2, "A string argument.", 3.5);
(gdb) list
57 {
58 }
59
60 main ()
61 {
62 callee1 (2, "A string argument.", 3.5);
63 callee1 (2, "A string argument.", 3.5);
64
65 do_nothing (); /* Hello, World! */
66
(gdb)
Note the list started at line 57. IOW, the program stopped at line
62, and GDB centered the list on that.
compare with:
$ ./gdb -nx -q ./testsuite/gdb.mi/mi-cli -i=mi
=thread-group-added,id="i1"
~"Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli..."
~"done.\n"
(gdb)
start
&"start\n"
...
~"\nTemporary breakpoint "
~"1, main () at ../../../src/gdb/testsuite/gdb.mi/basics.c:62\n"
~"62\t callee1 (2, \"A string argument.\", 3.5);\n"
*stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x000000000040054d",func="main",args=[],file="../../../src/gdb/testsuite/gdb.mi/basics.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/basics.c",line="62"},thread-id="1",stopped-threads="all",core="0"
=breakpoint-deleted,id="1"
(gdb)
-interpreter-exec console list
~"62\t callee1 (2, \"A string argument.\", 3.5);\n"
~"63\t callee1 (2, \"A string argument.\", 3.5);\n"
~"64\t\n"
~"65\t do_nothing (); /* Hello, World! */\n"
~"66\t\n"
~"67\t callme (1);\n"
~"68\t callme (2);\n"
~"69\t\n"
~"70\t return 0;\n"
~"71\t}\n"
^done
(gdb)
Here the list starts at line 62, where the program was stopped.
This happens because print_stack_frame, called from both normal_stop
and mi_on_normal_stop, is the function responsible for setting the
current sal from the selected frame, overrides the PRINT_WHAT
argument, and only after that does it decide whether to center the
current sal line or not, based on the overridden value, and it will
always decide false.
(The print_stack_frame call in mi_on_normal_stop is a little different
from the call in normal_stop, in that it is an unconditional
SRC_AND_LOC call. A future patch will make those uniform.)
A previous version of this patch made MI uniform with CLI here, by
making print_stack_frame also center when MI is active. That changed
the output of a "list" command in mi-cli.exp, to expect line 57
instead of 62, as per the example above.
However, looking deeper, that list in question is the first "list"
after the program stops, and right after the stop, before the "list",
the test did "set listsize 1". Let's try the same thing with the CLI:
(gdb) start
62 callee1 (2, "A string argument.", 3.5);
(gdb) set listsize 1
(gdb) list
57 {
Huh, that's unexpected. Why the 57? It's because print_stack_frame,
called in reaction to the breakpoint stop, expecting the next "list"
to show 10 lines (the listsize at the time) around line 62, sets the
lines listed range to 57-67 (62 +/- 5). If the user changes the
listsize before "list", why would we still show that range? Looks
bogus to me.
So the fix for this whole issue should be delay trying to center the
listing to until actually listing, so that the correct listsize can be
taken into account. This makes MI and CLI uniform too, as it deletes
the center code from print_stack_frame.
A series of tests are added to list.exp to cover this. mi-cli.exp was
after all correct all along, but it now gains an additional test that
lists lines with listsize 10, to ensure the centering is consistent
with CLI's.
One related Python test changed related output -- it's a test that
prints the line number after stopping for a breakpoint, similar to the
new list.exp tests. Previously we'd print the stop line minus 5 (due
to the premature centering), now we print the stop line. I think
that's a good change.
Tested on x86_64 Fedora 20.
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (list_command): Handle the first "list" after the
current source line having changed.
* frame.h (set_current_sal_from_frame): Remove 'center' parameter.
* infrun.c (normal_stop): Adjust call to
set_current_sal_from_frame.
* source.c (clear_lines_listed_range): New function.
(set_current_source_symtab_and_line, identify_source_line): Clear
the lines listed range.
(line_info): Handle the first "info line" after the current source
line having changed.
* stack.c (print_stack_frame): Remove center handling.
(set_current_sal_from_frame): Remove 'center' parameter. Don't
center sal.line.
gdb/testsuite/
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.base/list.exp (build_pattern, test_list): New procedures.
Use them to test variations of "list" after reaching a breakpoint.
* gdb.mi/mi-cli.exp (line_main_callme_2): New global.
Test "list" with listsize 10 after reaching a breakpoint.
* gdb.python/python.exp (decode_line current location line
number): Adjust expected line number.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
exception.
(_iterator_except): New function.
(ArrayPrinter): Use _iterator function instead of local _iterator
class for Python 3 compatibility.
(NoStringContainerPrinter): Use _iterator_except instead of
_iterator.
* gdb.python/py-typeprint.exp: Use exec(open(...).read()) instead of
execfile for Python 3 compatibility.
* gdb.python/python.exp: Handle Python 2.4 exception traceback
format in error_prompt test.
* gdb.base/charset.exp: Change print syntax for Python 3
compatibility.
* gdb.python/py-block.exp: Ditto.
* gdb.python/py-breakpoint.exp: Ditto.
* gdb.python/py-cmd.exp: Ditto.
* gdb.python/py-events.py: Ditto.
* gdb.python/py-finish-breakpoint.py: Ditto.
* gdb.python/py-finish-breakpoint2.exp: Ditto.
* gdb.python/py-finish-breakpoint2.py: Ditto.
* gdb.python/py-frame-inline.exp: Ditto.
* gdb.python/py-frame.exp: Ditto.
* gdb.python/py-infthread.exp: Ditto.
* gdb.python/py-objfile.exp: Ditto.
* gdb.python/py-parameter.exp: Ditto.
* gdb.python/py-progspace.exp: Ditto.
* gdb.python/py-prompt.exp: Ditto.
* gdb.python/py-symbol.exp: Ditto.
* gdb.python/py-symtab.exp: Ditto.
* gdb.python/py-template.exp: Ditto.
* gdb.python/py-value-cc.exp: Ditto.
* gdb.python/python.exp: Ditto.
* gdb.python/source2.py: Ditto.
* gdb.python/lib-types.exp: Change print syntax for Python 3
compatibility.
Use sorted() function rather than sort() method.
Accept either int or long values for enum values.
* gdb.python/py-events.exp: Use exec(open(...).read()) instead of
execfile for Python 3 compatibility.
* gdb.python/py-evsignal.exp: Ditto.
* gdb.python/py-evthreads.exp: Ditto.
* gdb.python/py-mi.exp: Ditto.
* gdb.python/py-pp-maint.exp: Ditto.
* gdb.python/py-prettyprint.exp: Ditto.
* gdb.python/py-finish-breakpoint.exp: Change print syntax for
Python 3 compatibility.
Skip tests for Python 2.4.
* gdb.python/py-inferior.exp: Change print syntax for
Python 3 compatibility.
Use byte string rather than character string in memory write test
if Python 3.
* gdb.python/py-pp-maint.py: Change class declarations to "new
class" syntax.
* gdb.python/py-prettyprint.py: Change iterator class to generator
function for Python 3 compatibility.
Make all classes "new style".
Fix indentation issue and stray semicolon.
* gdb.python/py-shared.expChange print syntax for Python 3
compatibility.
Define "long" if Python 3.
* gdb.python/py-type.exp: Change print syntax for Python 3
compatibility.
Accept either int or long values for enum values.
* gdb.python/py-value.exp: Change print syntax for Python 3
compatibility.
Skip "long" and "unicode" tests if Python 3.
Accept either "type" or "class" in type checks.
* lib/gdb.exp (gdb_py_is_py3k): New flag set if Python 3.
(gdb_py_is_py24): New flag set if Python 2.4 or 2.5.
* python/python.c (finalize_python): New function.
(_initialize_python): Make a final cleanup.
testsuite
* gdb.python/python.exp: Test atexit.register.
a new "_gdb" module for code implemented in C, and using reload/__import__
instead of exec.
gdb/
* python/lib/gdb/__init__.py: Import * from _gdb.
(GdbOutputFile, sys.stdout, GdbOutputErrorFile, sys.stderr,
prompt_hook, sys.argv): Moved from finish_python_initialization.
(pretty_printers, PYTHONDIR): Moved from _initialize_python.
(packages, auto_load_packages): New list and function replacing
module_dict and auto-loading code, using __file__ instead of
gdb.PYTHONDIR and reload/__import__ instead of exec.
(GdbSetPythonDirectory): Replacing function of the same name
from finish_python_initialization, using reload/__import__ instead
of exec, as well as call auto_load_packages.
* python/py-prettyprint.c (find_pretty_printer_from_gdb): Check
gdb_python_module and not gdb_module.
* python/python-internal.h (gdb_python_module): Declare.
* python/python.c (gdb_python_module): New global.
(before_prompt_hook): Check gdb_python_module and not gdb_module.
(_initialize_python): Rename gdb module to _gdb.
Move gdb.PYTHONDIR and gdb.pretty_printer to lib/gdb/__init__.py.
(finish_python_initialization): Move Python code to
lib/gdb/__init__.py; instead, set up sys.path and import gdb into
__main__.
gdb/testsuite/
* gdb.python/python.exp (Test stderr location): Update module
location of GDB-specific sys.stderr.
(Test stdout location): Ditto for sys.stdout.
prepare_for_testing.
* gdb.python/py-block.exp: Use standard_testfile.
* gdb.python/py-breakpoint.exp: Use standard_testfile.
* gdb.python/py-events.exp: Use standard_testfile,
standard_output_file.
* gdb.python/py-evsignal.exp: Use standard_testfile.
* gdb.python/py-evethreads.exp: Use standard_testfile.
* gdb.python/py-explore-cc.exp: Use standard_testfile.
* gdb.python/py-explore.exp: Use standard_testfile.
* gdb.python/py-finish-breakpoint.exp: Use standard_testfile,
standard_output_file.
* gdb.python/py-finish-breakpoint2.exp: Use standard_testfile,
prepare_for_testing.
* gdb.python/py-frame-inline.exp: Use standard_testfile.
* gdb.python/py-frame.exp: Use standard_testfile.
* gdb.python/py-inferior.exp: Use standard_testfile.
* gdb.python/py-infthread.exp: Use standard_testfile.
* gdb.python/py-mi.exp: Use standard_testfile.
* gdb.python/py-objfile-script.exp: Use standard_testfile,
build_executable.
* gdb.python/py-objfile.exp: Use standard_testfile.
* gdb.python/py-pp-maint.exp: Use standard_testfile,
prepare_for_testing.
* gdb.python/py-prettyprint.exp: Use standard_testfile.
* gdb.python/py-progspace.exp: Use standard_testfile,
build_executable.
* gdb.python/py-prompt.exp: Use standard_testfile,
build_executable.
* gdb.python/py-section-script.exp: Use standard_testfile,
build_executable.
* gdb.python/py-shared.exp: Use standard_testfile,
standard_output_file, clean_restart.
* gdb.python/py-symbol.exp: Use standard_output_file,
prepare_for_testing.
* gdb.python/py-symtab.exp: Use standard_output_file,
prepare_for_testing
* gdb.python/py-template.exp: Use standard_testfile.
* gdb.python/py-type.exp: Use standard_testfile.
* gdb.python/py-value-cc.exp: Use standard_testfile.
* gdb.python/py-value.exp: Use standard_testfile.
* gdb.python/python.exp: Use standard_testfile, build_executable.
Add a new function gdb.find_pc_line to the Python API.
* NEWS (Python Scripting): Add entry about the new function.
* python/python.c (gdbpy_find_pc_line): New function which
implements gdb.find_pc_line.
(GdbMethods): Add entry for the new function.
doc/
* gdb.texinfo (Basic Python): Add description about the function
gdb.find_pc_line
testsuite/
* gdb.python/python.c: Add a new breakpoint comment.
* gdb.python/python.exp: Add tests to test gdb.find_pc_line.
source_script_from_stream if it may have been found on the search path.
* python/py-auto-load.c (source_section_scripts): Pass full path to
source_python_script_for_objfile.
* python/python.c (source_python_script): Delete stream parameter.
All callers updated.
(source_python_script_for_objfile): Ditto.
* python/python-internal.h (source_python_script_for_objfile): Update.
* python/python.h (source_python_script): Update.
testsuite/
* gdb.python/python.exp: Test source -s.
PR python/12212
* python/py-inferior.c (find_thread_object): Check if PIDGET
returns 0.
2010-11-23 Phil Muldoon <pmuldoon@redhat.com>
PR python/12212
* gdb.python/python.exp: Check that selected_thread raises an
error when no inferior is loaded.
Redirect also uiout and stdtarg{,err} in execute_command_to_string.
* cli-logging.c (struct saved_output_files) <targerr>: New.
(set_logging_redirect, pop_output_files, handle_redirections):
Redirect also gdb_stdtargerr.
* defs.h (struct ui_out, make_cleanup_ui_out_redirect_pop): New
declarations.
* event-top.c (gdb_setup_readline, gdb_disable_readline): Redirect
also gdb_stdtargerr.
* top.c (execute_command_to_string): Move make_cleanup_ui_file_delete
to the top. Redirect also gdb_stdlog, gdb_stdtarg and gdb_stdtargerr.
Use ui_out_redirect, register make_cleanup_ui_out_redirect_pop.
* tui/tui-io.c (tui_setup_io): Redirect also gdb_stdtargerr.
* utils.c (do_ui_out_redirect_pop, make_cleanup_ui_out_redirect_pop):
New functions.
gdb/testsuite/
* gdb.python/python.exp (set height 0, collect help from uiout)
(verify help to uiout): New tests.
Joel Brobecker
Luis Machado
Markus Metzger
Doug Evans
Simon Marchi
Yao Qi
Pedro Alves
Doug Evans
Joel Brobecker
Paul Koning
Tom Tromey
Yit Phang Khoo
Siva Chandra Reddy
Keith Seitz
Phil Muldoon
Marek Polacek
matt rice
Jan Kratochvil