While reading py-framefilter.c, I found one spot where an exception
could be caught but then not be turned into EXT_LANG_BT_ERROR. This
patch fixes this spot.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_print_single_arg): Return
EXT_LANG_BT_ERROR from catch.
PR backtrace/15584 notes that some code in backtrace_command_1 is not
useful when frame filters are in use. This patch moves this code into
the no-frame-filters "if". This also removes the unused local
"trailing_level", which I noticed while moving the code around.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15584:
* stack.c (backtrace_command_1): Move some code into no-filters
"if".
If a C-c comes while the Python code for a frame filter is running, it
will be turned into a Python KeyboardException. It seems good for
this to be treated like a GDB quit, so this patch changes
py-framefilter.c to notice this situation and call throw_quit in this
case.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (throw_quit_or_print_exception): New
function.
(gdbpy_apply_frame_filter): Use it.
gdb/testsuite/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* gdb.python/py-framefilter.exp: Add test for KeyboardInterrupt.
* gdb.python/py-framefilter.py (name_error): New global.
(ErrorInName.function): Use name_error.
PR cli/17716 notes that it is difficult to C-c (or "q" at a pagination
prompt) while backtracing using a frame filter. One reason for this
is that many places in py-framefilter.c use RETURN_MASK_ALL in a
try/catch.
This patch changes these spots to use RETURN_MASK_ERROR instead. This
is safe to do because this entire file is exception safe now.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR cli/17716:
* python/py-framefilter.c (py_print_type, py_print_value)
(enumerate_args, py_print_args, gdbpy_apply_frame_filter): Use
RETURN_MASK_ERROR.
This patch removes the last bit of manual resource management from
py-framefilter.c. This will be useful in the next patch.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (enumerate_args): Use
gdb::unique_xmalloc_ptr.
While looking at the frame filter code, I noticed that
EXT_LANG_BT_COMPLETED is not really needed. Semantically there is no
difference between the "completed" and "ok" results. So, this patch
removes this constant.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_print_frame): Return
EXT_LANG_BT_OK.
(gdbpy_apply_frame_filter): Update comment.
* extension.h (enum ext_lang_bt_status) <EXT_LANG_BT_COMPLETED>:
Remove.
<EXT_LANG_BT_NO_FILTERS>: Change value.
When a frame filter elides some frames, they are still printed by
"bt", indented a few spaces. PR backtrace/15582 notes that it would
be nice for users if elided frames could simply be dropped. This
patch adds this capability.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* stack.c (backtrace_command): Parse "hide" argument.
* python/py-framefilter.c (py_print_frame): Handle PRINT_HIDE.
* extension.h (enum frame_filter_flags) <PRINT_HIDE>: New
constant.
gdb/doc/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* gdb.texinfo (Backtrace): Mention "hide" argument.
gdb/testsuite/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* gdb.python/py-framefilter.exp: Add "bt hide" test.
The next patch will add more flags to backtrace_command_1; and rather
than add another boolean argument, this patch changes it to accept a
flags value.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* stack.c (backtrace_command_1): Remove "show_locals" parameter,
add "flags".
(backtrace_command): Remove "fulltrace", add "flags".
The backtrace command has peculiar command-line parsing. In
particular, it splits the command line, then loops over the arguments.
If it sees a word it recognizes, like "full", it effectively drops
this word from the argument vector. Then, it pastes together the
remaining arguments, passing them on to backtrace_command_1, which in
turn passes the resulting string to parse_and_eval_long.
The documentation doesn't mention the parse_and_eval_long at all, so
it is a bit of a hidden feature that you can "bt 3*2". The strange
algorithm above also means you can "bt 3 * no-filters 2" and get 6
frames...
This patch changes backtrace's command line parsing to be a bit more
rational. Now, special words like "full" are only recognized at the
start of the command.
This also updates the documentation to describe the various bt options
individually.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* stack.c (backtrace_command): Rewrite command line parsing.
gdb/doc/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Backtrace): Describe options individually.
While moving things around, I stumbled on filename_seen_cache being
re-defined, because filename-seen-cache.h doesn't have an include guard.
gdb/ChangeLog:
* filename-seen-cache.h: Add include guard.
Buildbot pointed out a failiure in windows-nat.c:
../../binutils-gdb/gdb/windows-nat.c:582:10: error: using typedef-name 'section_addr_info' after 'struct'
struct section_addr_info *addrs;
^~~~~~~~~~~~~~~~~
In file included from ../../binutils-gdb/gdb/windows-nat.c:49:0:
../../binutils-gdb/gdb/symfile.h:75:37: note: 'section_addr_info' has a previous declaration here
typedef std::vector<other_sections> section_addr_info;
^~~~~~~~~~~~~~~~~
A recursive grep of the sources for "struct section_addr_info" reveals one
additional reference in a comment. In both cases, this patch simply removes
the struct keyword.
gdb/ChangeLog:
* symfile.c (place_section): Remove "struct" from section_addr_info
in comment.
* windows-nat.c (struct safe_symbol_file_add_args) <addrs>: Remove
"struct" keyword from section_addr_info.
I noticed that in evaluate_funcall, where we handle
OP_VAR_MSYM_VALUE/OP_VAR_VALUE to figure out the symbol's name gets
the minimal_symbol/symbol backwards. Happens to be harmless in
practice because the symbol name is recorded in the common initial
sequence (in the general_symbol_info field).
gdb/ChangeLog:
2018-03-25 Pedro Alves <palves@redhat.com>
* eval.c (evaluate_funcall): Swap OP_VAR_MSYM_VALUE/OP_VAR_VALUE
if then/else bodies in var_func_name extraction.
TLS variables can't be resolved on aarch64-linux-gnu
Running the test case with upstream gdb shows two failures:
(1) Receiving different error messages when printing TLS variable before
program runs - because the ARM compiler does not emit dwarf attribute
DW_AT_location for TLS, the result is expected and the baseline may
need to be changed for aarch64.
(2) Using "info address" command on C++ static TLS object resulted in
"symbol unresolved" error - below is a snippet from the test case:
class K {
public:
static __thread int another_thread_local;
};
__thread int K::another_thread_local;
(gdb) info address K::another_thread_local
Symbol "K::another_thread_local" is unresolved.
This patch contains fix for (2).
Function info_address_command() handles the "info address" command and
calls lookup_minimal_symbol_and_objfile() to find sym's symbol entry in
mininal symbol table if SYMBOL_COMPUTED_OPS (sym) is false. Problem is
that function lookup_minimal_symbol_and_objfile() only looked up an
objfile's minsym ordinary hash table, not its demangled hash table, which
was the reason why the C++ name was not found.
The fix is to call lookup_minimal_symbol(), which already looks up entries
in both minsym's hash tables, to find names when traversing the object file
list in lookup_minimal_symbol_and_objfile().
Tested in both aarch64-linux-gnu and amd64-linux-gnu. No regressions.
c++/22968 involves the inability of ptype to find a type definition for
a type defined inside another type. I recently added some additional
support for nested type definitions, but I apparently overlooked psymbols.
The user reports that using -readnow fixes the problem:
$ gdb 22968 -ex "ptype Outer::Inner"
There is no field named Inner
$ gdb -readnow 22968 -ex "ptype Outer::Inner"
type = struct Outer::Inner {
<no data field>
}
We clearly did not find a psymbol for Outer::Inner because it was located
in another CU. This patch addresses this problem by scanning structs
for additional psymbols. Rust is already doing this.
With this patch, the identical result to "-readnow" is given (without
using `-readnow', of course).
gdb/ChangeLog:
PR c++/22968
* dwarf2read.c (scan_partial_symbols): Scan structs/classes for
nested type definitions for C++, too.
gdb/testsuite/ChangeLog:
PR c++/22968
* gdb.cp/subtypes.exp: New file.
* gdb.cp/subtypes.h: New file.
* gdb.cp/subtypes.cc: New file.
* gdb.cp/subtypes-2.cc: New file.
This changes machoread.c to use std::vector rather than VEC. This
allows removing some cleanups.
Regression tested by the buildbot, though I don't think anything
actually tests macho reading.
gdb/ChangeLog
2018-03-23 Tom Tromey <tom@tromey.com>
* machoread.c (struct oso_el): Add a constructor. Don't define as
a typedef.
(macho_register_oso): Remove.
(macho_symtab_read): Take a std::vector.
(oso_el_compare_name): Now a std::sort comparator.
(macho_symfile_read_all_oso): Take a std::vector.
(macho_symfile_read): Use std::vector. Remove cleanups.
This test starts up and confirms that $xmm0 has the value 0, it then
modifies $xmm0 (in the inferior) and confirms that the new value can
be read (in GDB).
On some machines I was noticing that this test would occasionally
fail, and on investigation I believe that the reason for this is that
the test is linked as a dynamically linked executable and makes use of
the system libraries during startup. The reason that this causes
problems is that both the runtime linker and the startup code run
before main can, and do (on at least some platforms) make use of the
XMM registers.
In this commit I modify the test program slightly to allow it to be
linked statically, without using the startup libraries. Now by the
time GDB reaches the symbol main we have only executed one 'nop'
instruction, and the XMM registers should all have the value 0. I've
extended the test script to confirm that $xmm0 to $xmm15 are all
initially 0, and I also check that at the point after $xmm0 has been
modified, all the other XMM registers ($xmm1 to $xmm15) are still 0.
The test program is still linked against libc in order that we can
call the exit function, however, we now call _exit rather than exit in
order to avoid all of the usual cleanup that exit does. This clean up
tries to tear down things that are usually setup during the startup
code, but now this isn't called calling exit will just result in a
crash.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-disp-step-avx.S: Add '_start' label.
(done): Call '_exit' not 'exit' to avoid atexit handlers.
* gdb.arch/amd64-disp-step-avx.exp: Pass -static, and
-nostartfiles when compiling the test. Confirm that all registers
xmm0 to xmm15 are initially 0, and that xmm1 to xmm15 are 0 after.
A small number of tests incorrectly tried to pass -Wa,-g through to
GCC as an extra compile time flag, either to gdb_compile or
prepare_for_testing.
The problem is that the syntax used for passing the flags was
incorrect, and as a result these extra flags were being ignored.
Luckily, the 'debug' flag was being passed in each case anyway, which
means that the '-g' flag would already be added.
Given that all these tests pass 'debug', and the invalid flag has been
ignored for some time, I'm just removing the flags in this commit.
I've also changed the tests from using gdb_compile to
prepare_for_testing, which allows some extra code to be removed from a
couple of tests scripts.
There should be no change in the test results after this commit.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-disp-step-avx.exp: Remove unneeded assembler flag
option, syntax was wrong anyway.
* gdb.arch/arm-disp-step.exp: Likewise.
* gdb.arch/sparc64-regs.exp: Likewise.
* gdb.arch/amd64-disp-step.exp: Remove unneeded assembler flag
option, syntax was wrong anyway, switch to use
prepare_for_testing.
* gdb.arch/i386-disp-step.exp: Likewise.
This removes some cleanups from record-full.c in a straightforward
way.
Tested by the buildbot.
gdb/ChangeLog
2018-03-22 Tom Tromey <tom@tromey.com>
* record-full.c (record_full_exec_insn): Use gdb::byte_vector.
(record_full_goto_bookmark): Use std::string.
This patch merges the masks for matching the stwux and stdux
instructions in rs6000-tdep.c:skip_prologue into a single mask that
only matches these two instructions.
Commit 72dd273062 fixed the warning described in PR tdep/18295, this
patch addresses the comment in the same PR indicating that the mask
was too permissive.
gdb/Changelog:
PR tdep/18295
* rs6000-tdep.c (skip_prologue): Match both stwux and stdux
a single mask.
This patch extends rs6000-tdep.c:skip_prologue so that it can detect
when the Link Register is saved using the frame pointer (usually r31)
in adition to the stack pointer (r1).
The frame pointer offset from the frame base is tracked separately
from the stack pointer offset for cases when the frame pointer is not
in synch with the stack pointer at the moment of the LR save.
Previously, "stq" could also be detected as an instruction that saves
LR or CR. Because this was likely unintentional, this patch also
restricts the matches to stw/stwu/std/stdu.
gdb/ChangeLog:
* rs6000-tdep.c (store_insn_p): New function.
(skip_prologue): New variable alloca_reg_offset. Set lr_reg
and cr_reg to their unshifted values. Use store_insn_p to
match LR saves using either R1 or fdata->alloca_reg. Use
store_insn_p to match CR saves. Set alloca_reg_offset
when alloca_reg and framep are set. Remove lr_reg shift
when assigning to fdata->lr_register.
Currently "info proc cmdline" on GNU/Linux does not show the full command
line, but only argument 0. And even a warning is shown if there are more.
This was discussed in 2014 already:
https://sourceware.org/ml/gdb-patches/2014-04/msg00212.html
Follow the advice there and avoid target_fileio_read_stralloc. Instead,
use target_fileio_read_alloc to read the whole command line and then
replace NUL characters by spaces. Also add an appropriate test case.
Note that gdbserver already handles this correctly.
gdb/ChangeLog:
* linux-tdep.c (linux_info_proc): For "info proc cmdline", print
command line args instead of emitting a warning.
gdb/testsuite/ChangeLog:
* gdb.base/info-proc.exp: Add test for "info proc cmdline".
This corrects bad formatting in the newly introduced function
s390_get_wordsize.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_get_wordsize): Correct brace style.
This patch replaces VEC(static_tracepoint_marker_p) with std::vector,
and does some c++ification around that. I thought a new overload of
hex2str was useful, so I added it as well as corresponding unit tests.
I also added an overload of ui_out::field_string that takes an
std::string directly.
gdb/ChangeLog:
* tracepoint.h (struct static_tracepoint_marker): Initialize
fields, define default constructor, move constructor and move
assignment, disable the rest.
<str_id, extra>: Make std::string.
(release_static_tracepoint_marker): Remove.
(free_current_marker): Remove.
* tracepoint.c (free_current_marker): Remove.
(parse_static_tracepoint_marker_definition): Adjust to
std::string, use new hex2str overload.
(release_static_tracepoint_marker): Remove.
(print_one_static_tracepoint_marker): Get marker by reference
and adjust to std::string.
(info_static_tracepoint_markers_command): Adjust to std::vector
changes
* target.h (static_tracepoint_marker_p): Remove typedef.
(DEF_VEC_P(static_tracepoint_marker_p)): Remove.
(struct target_ops) <to_static_tracepoint_marker_at>: Return
bool.
<to_static_tracepoint_markers_by_strid>: Return std::vector.
* target-debug.h
(target_debug_print_VEC_static_tracepoint_marker_p_p): Remove.
(target_debug_print_std_vector_static_tracepoint_marker): New.
(target_debug_print_struct_static_tracepoint_marker_p): Rename
to...
(target_debug_print_static_tracepoint_marker_p): ... this.
* target-delegates.c: Re-generate.
* breakpoint.h (struct tracepoint) <static_trace_marker_id>:
Make std::string.
* breakpoint.c (init_breakpoint_sal): Adjust to std::string.
(decode_static_tracepoint_spec): Adjust to std::vector.
(tracepoint_print_one_detail): Adjust to std::string.
(strace_marker_decode_location): Adjust to std::string.
(update_static_tracepoint): Adjust to std::string, remove call
to release_static_tracepoint_marker.
* linux-nat.c (linux_child_static_tracepoint_markers_by_strid):
Adjust to std::vector.
* remote.c (remote_static_tracepoint_marker_at): Return bool.
(remote_static_tracepoint_markers_by_strid): Adjust to
std::vector.
* common/rsp-low.h (hex2str): New overload with explicit count
of bytes.
* common/rsp-low.c (hex2str): New overload with explicit count
of bytes.
* unittests/rsp-low-selftests.c (test_hex2str): New function.
(_initialize_rsp_low_selftests): Add test_hex2str test.
* unittests/tracepoint-selftests.c
(test_parse_static_tracepoint_marker_definition): Adjust to
std::string.
Since I modify the parse_static_tracepoint_marker_definition function in
the next patch, I wanted to write a unit test for it. Doing so showed
that it doesn't handle multiple consecutive static tracepoint
definitions separated by commas. However, the RSP documentation [1]
states that servers may return multiple definitions, like:
1234:6d61726b657231:6578747261207374756666,abba:6d61726b657232:
The problem is that the function uses strlen to compute the length of
the last field (the extra field). If there are additional definitions
in addition to the one we are currently parsing, the returned length
will include those definitions, and we'll try to hex-decode past the
extra field.
This patch changes parse_static_tracepoint_marker_definition to consider
the case where the current definition is followed by a comma and more
definitions. It also adds the unit test that found the issue in the
first place.
I don't think this causes any backwards compatibility issues, because
the previous code only handled single static tracepoint definitions, and
the new code handles that correctly.
gdb/ChangeLog:
* tracepoint.c (parse_static_tracepoint_marker_definition):
Consider case where the definition is followed by more
definitions.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
tracepoint-selftests.c.
* unittests/tracepoint-selftests.c: New.
[1] https://sourceware.org/gdb/onlinedocs/gdb/Tracepoint-Packets.html#qTfSTM
The in-process agent does not handle tdescs with guarded storage yet.
This is fixed.
gdb/gdbserver/ChangeLog:
* linux-s390-ipa.c (get_ipa_tdesc): Add handling for
S390_TDESC_GS.
* linux-s390-low.c (s390_get_ipa_tdesc_idx): Likewise.
(initialize_low_tracepoint): Call init_registers_s390x_gs_linux64
and init_registers_s390_gs_linux64.
On S390, the guarded storage register set is only valid if guarded storage
is active. Reading/writing the register set yields errors if this is not
the case. Then gdbserver emits warnings like these:
Warning: ptrace(regsets_store_inferior_registers): No data available
Apart from confusing the user, this can also lead to test case failures
due to unexpected output. To suppress this, make the guarded storage
regsets read-only for now.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_fill_gs): Remove function.
(s390_fill_gsbc): Remove function.
(s390_regsets): Set fill functions for the guarded storage regsets
to NULL.
On s390x, when running attach.exp with native-extended-gdbserver,
gdbserver crashes in find_regno like this:
.../regcache.c:252: A problem internal to GDBserver has been detected.
Unknown register tdb0 requested
On the GDB side it looks like this:
(gdb) attach 31568
Attaching to process 31568
Remote connection closed
The test case attempts to attach to a new process via the already running
gdbserver. Thus s390_arch_setup is called a second time, and that's where
the problem occurs. In order to determine the word width (32 or 64 bits),
s390_arch_setup reads the pswm register through the regcache. For that it
uses a temporary tdesc which is supposed to work for all s390 targets,
since the actual tdesc has not been determined yet. But in this second
round this doesn't work, because s390_regsets has been updated already and
now contains regsets not described by the temporary tdesc, such as the one
containing tdb0.
This is fixed by rearranging the logic in s390_arch_setup.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_get_hwcap): Replace tdesc parameter by
the word size. Add comment.
(s390_get_wordsize): New function.
(s390_arch_setup): No longer select a temporary tdesc to fetch the
pswm with it. Instead, use s390_get_wordsize to determine the
word size first and derive the correct tdesc from that directly.
This patch fixes a compile error introduced by my previous change, which
caused the indentation of the following code block to become incorrect.
ChangeLog:
2018-03-20 Stephen Roberts <stephen.roberts@arm.com>
* gdb/symtab.c (find_pc_sect_line): fixed indentation.
This patch addresses slowness when setting breakpoints, especially in
heavily templatized code. Profiling showed that find_pc_sect_line in
symtab.c was the performance bottleneck. The original logic performed a
linear search over ordered data. This patch uses a binary search, as
suggested by comments around the function. There are no behavioural
changes, but gdb is now faster at setting breakpoints in template code.
Tested using on make check on an x86 target. The optimisation speeds up
the included template-breakpoints.py performance test by a factor of 7
on my machine.
ChangeLog:
2018-03-20 Stephen Roberts <stephen.roberts@arm.com>
* gdb/symtab.c (find_pc_sect_line): now uses binary search.
gdb/testsuite/
* gdb.perf/template-breakpoints.cc: New file.
* gdb.perf/template-breakpoints.exp: New file.
* gdb.perf/template-breakpoints.py: New file.
In Rust one can initialize a struct member from an identically-named
local variable by simply mentioning the member name in the
initializer, like:
let x = 0;
let y = Struct { x };
This initializes "Struct::x" from "x".
This patch adds this form of initializer to the Rust expression parser
and adds a test.
Tested on x86-64 Fedora 26 using rustc 1.23.
2018-03-19 Tom Tromey <tom@tromey.com>
* rust-exp.y (struct_expr_tail, struct_expr_list): Add plain
"IDENT" production.
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.rs (main): Add local variables field1, field2,
y0.
* gdb.rust/simple.exp: Test bare identifier form of struct
initializer.
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
Some of GDB's trace test cases define a function end() and place a
breakpoint there with "break end". However, when libinproctrace is linked
to the binary, there are multiple methods named "end", such as
std::string::end() from the C++ library or format_pieces::end() from
common/format.h. GDB then creates multiple breakpoints instead of just a
single one, and some FAILs result, such as these:
FAIL: gdb.trace/trace-mt.exp: ftrace on: break end
FAIL: gdb.trace/trace-mt.exp: ftrace off: break end
Fix this by adding the "-qualified" option to the break commands. For
consistency, change all occurrences of "break end" (and similar) in all
trace test cases, even if the current behavior does not cause problems.
Also, consequently use the gdb_breakpoint convenience proc.
gdb/testsuite/ChangeLog:
* gdb.trace/actions-changed.exp: Call gdb_breakpoint with the
"qualified" option when setting breakpoints.
* gdb.trace/backtrace.exp: Likewise.
* gdb.trace/circ.exp: Likewise.
* gdb.trace/collection.exp: Likewise.
* gdb.trace/disconnected-tracing.exp: Likewise.
* gdb.trace/ftrace-lock.exp: Likewise.
* gdb.trace/ftrace.exp: Likewise.
* gdb.trace/infotrace.exp: Likewise.
* gdb.trace/packetlen.exp: Likewise.
* gdb.trace/passc-dyn.exp: Likewise.
* gdb.trace/qtro.exp: Likewise.
* gdb.trace/read-memory.exp: Likewise.
* gdb.trace/report.exp: Likewise.
* gdb.trace/signal.exp: Likewise.
* gdb.trace/status-stop.exp: Likewise.
* gdb.trace/strace.exp: Likewise.
* gdb.trace/tfind.exp: Likewise.
* gdb.trace/trace-break.exp: Likewise.
* gdb.trace/trace-condition.exp: Likewise.
* gdb.trace/trace-mt.exp: Likewise.
* gdb.trace/tstatus.exp: Likewise.
* gdb.trace/tsv.exp: Likewise.
* gdb.trace/unavailable-dwarf-piece.exp: Likewise.
* gdb.trace/unavailable.exp: Likewise.
* gdb.trace/while-dyn.exp: Likewise.
This removes some cleanups from solib.c, replacing them with
gdb::def_vector.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-18 Tom Tromey <tom@tromey.com>
* solib.c (gdb_bfd_lookup_symbol_from_symtab): Use
gdb::def_vector.
(bfd_lookup_symbol_from_dyn_symtab): Likewise.
This replaces some manual string manipulation in
auto_load_objfile_script_1 with std::string, simplifying the code and
allowing the removal of some cleanups.
Tested by the buildbot.
2018-03-17 Tom Tromey <tom@tromey.com>
* auto-load.c (auto_load_objfile_script_1): Use std::string.
This removes target_fileio_close_cleanup in favor of a new RAII class.
The new class is similar to scoped_fd but calls
target_fileio_close_cleanup rather than close.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-17 Tom Tromey <tom@tromey.com>
* target.c (class scoped_target_fd): New.
(target_fileio_close_cleanup): Remove.
(target_fileio_read_alloc_1): Use scoped_target_fd.
Many projects (e.g. the Linux kernel) and build systems use "silent"
rules, which means that they'll only print a summary of what's being
done instead of printing all the detailed command lines. While chatting
on the #gdb IRC channel, I realized a few people (including me) thought
it would be nice to have it in GDB too.
The idea is that too much text is not useful, the important information
gets lost. If there's only the essential information, it's more likely
to be useful. Most of the time, when I look at the build output, it's
to see how it's progressing. By just printing a brief summary of each
operation, I can easily spot what's currently being compiled and
therefore how the build progresses (with time you know the order in
which files are compiled almost by heart).
As with other projects (Linux, automake-based things, probably others),
it's possible to print the complete command lines by passing V=1 to make
(or any other non-zero value).
I had one hesitation about this: when people report build failures, we
are more likely to miss the full compile command line. We'll probably
sometimes need to ask people to include the build log with "make V=1".
I don't think it's a big downside, if other projects the size of the
Linux kernel can live with it, I'm sure we can too.
gdb/ChangeLog:
* silent-rules.mk: New.
* Makefile.in: Include silent-rules.mk
(srcdir, VPATH, top_srcdir): Move up.
(COMPILE): Add ECHO_CXX.
(test-cp-name-parser$(EXEEXT)): Add ECHO_CXXLD.
(init.c): Add ECHO_INIT_C.
(gdb$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
(version.c): Add ECHO_GEN.
(printcmd.o): Add ECHO_CXX.
(target-float.o): Add ECHO_CXX.
(ada-exp.o): Add ECHO_CXX.
(stamp-xml): Add SILENCE and ECHO_GEN_XML_BUILTIN.
(insight$(EXEEXT)): Add ECHO_CXXLD.
* gnulib/configure.ac: Add AM_SILENT_RULES.
* gnulib/aclocal.m4: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* Makefile.in: Include silent-rules.mk.
(srcdir, abs_top_srcdir, abs_srcdir, VPATH): Move up.
(COMPILE): Add ECHO_CXX.
(gdbserver$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
(gdbreplay$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
($(IPA_LIB)): Add SILENCE and ECHO_CXXLD.
(version-generated.c): Add ECHO_GEN.
(stamp-xml): Add SILENCE and ECHO_GEN_XML_BUILTIN_GENERATED.
(IPAGENT_COMPILE): Add ECHO_CXX.
(%-generated.c): Add ECHO_REGDAT.
The tspeed test case does not execute correctly because libinproctrace.so
is not copied to the target. This is fixed.
gdb/testsuite/ChangeLog:
* gdb.trace/tspeed.exp: Add invocation of gdb_load_shlib to ensure
that libinproctrace is copied to the target.
This patch add some unit tests for the substitute_path_component
function.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/utils-selftests.c.
* unittests/utils-selftests.c: New file.
This changes the printf command's %s and %ls formats to special-case
NULL, and print "(null)" for these. This is PR cli/14977. This
behavior seems a bit friendlier; I was undecided on whether other
invalid pointers should be handled specially somehow, so for the time
being I've left those out.
gdb/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/14977:
* printcmd.c (printf_c_string, printf_wide_c_string): Special case
for NULL.
gdb/gdbserver/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/14977:
* ax.c (ax_printf): Special case for NULL.
gdb/testsuite/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/14977:
* gdb.base/printcmds.exp (test_printf): Add printf test of %s with
a null pointer.
* gdb.base/wchar.exp: Likewise.
PR cli/19918 points out that a printf format like "%-5p" will cause a
gdb crash. The bug is problem is that printf_pointer doesn't take the
"-" flag into account.
gdb/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/19918:
* printcmd.c (printf_pointer): Allow "-" in format.
gdb/testsuite/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
PR cli/19918:
* gdb.base/printcmds.exp (test_printf): Add printf test using '-'
flag.
This patch adds the "Usage:" text to the printf command's help text,
and tries to improve the text a tiny bit.
gdb/ChangeLog
2018-03-14 Tom Tromey <tom@tromey.com>
* printcmd.c (_initialize_printcmd): Add usage to printf.
This patches removes cleanups from a couple of spots by using
std::string rather than manual memory management.
Regression tested by the buildbot, though note that I don't believe
the buildbot actually exercises the machoread code.
gdb/ChangeLog
2018-03-13 Tom Tromey <tom@tromey.com>
* machoread.c (macho_check_dsym): Change filenamep to a
std::string*.
(macho_symfile_read): Update.
* symfile.c (load_command): Use std::string.
Fix some ARI issues in recently added riscv code, the ARI email is:
https://sourceware.org/ml/gdb-patches/2018-03/msg00156.html
gdb/ChangeLog:
* riscv-tdep.c (riscv_sw_breakpoint_from_kind): Add localization
to error message string.
(riscv_register_name): Use xsnprintf instead of sprintf.
(riscv_insn::fetch_instruction): Use gdb_assert instead of
internal_error.
(riscv_print_arg_location): Use gdb_assert_not_reached instead of
error.
(riscv_push_dummy_call): Likewise.
This changes a couple of spots that read section data to use
gdb::byte_vector rather than a cleanup.
Regression tested by the buildbot. I am not certain that the buildbot
actually tests the code in question, so I recommend careful review.
gdb/ChangeLog
2018-03-12 Tom Tromey <tom@tromey.com>
* rs6000-aix-tdep.c (rs6000_aix_core_xfer_shared_libraries_aix):
Use gdb::byte_vector.
* arm-tdep.c (arm_exidx_new_objfile): Use gdb::byte_vector.
Commit 849d0ba8 breaks GDB build for ia64 with --with-libunwind-ia64=yes.
This patch fixes it.
gdb:
2018-03-12 Yao Qi <yao.qi@linaro.org>
* ia64-libunwind-tdep.c (libunwind_get_reg_special): Change
parameter type to readable_regcache.
* ia64-libunwind-tdep.h (libunwind_get_reg_special): Update
the declaration.
This changes dwarf2read.c to use std::vector rather than a linked list
when managing the fields and base classes to be added to a type. This
removes some bookkeeping types and also allows the removal of some
cleanups.
gdb/ChangeLog
2018-03-11 Tom Tromey <tom@tromey.com>
* dwarf2read.c (struct nextfield): Add initializers.
(struct nextfnfield): Remove.
(struct fnfieldlist): Add initializers. Remove "length" and
"head", use std::vector.
(struct decl_field_list): Remove.
(struct field_info): Add initializers.
<fields, baseclasses>: Now std::vector.
<nbaseclasses, nfnfields, typedef_field_list_count,
nested_types_list_count>: Remove.
(dwarf2_add_field, dwarf2_add_type_defn)
(dwarf2_attach_fields_to_type, dwarf2_add_member_fn)
(dwarf2_attach_fn_fields_to_type, handle_struct_member_die)
(process_structure_scope): Update.
This removes a cleanup from build_type_psymtabs_1, by using
std::vector rather than manual memory management.
gdb/ChangeLog
2018-03-11 Tom Tromey <tom@tromey.com>
* dwarf2read.c (sort_tu_by_abbrev_offset): Change to be suitable
for use by std::sort.
(build_type_psymtabs_1): Use std::vector.
This adds display of a few recently added optional features.
gdb/ChangeLog:
2018-03-09 Eli Zaretskii <eliz@gnu.org>
* top.c (print_gdb_configuration): Reflect LIBIPT, LIBMEMCHECK,
and LIBMPFR in the printed configuration.
This changes a few more places to use scoped_fd. This allows the
removal of some cleanups.
Regression tested by the buildbot, though note that I'm not sure
whether the buildbot actually builds anything using all of these
files.
gdb/ChangeLog
2018-03-08 Tom Tromey <tom@tromey.com>
* source.c (get_filename_and_charpos): Use scoped_fd.
* nto-procfs.c (procfs_open_1): Use scoped_fd.
(procfs_pidlist): Likewise.
* procfs.c (proc_get_LDT_entry): Use scoped_fd.
(iterate_over_mappings): Likewise.
This started as a patch to change enable_thread_stack_temporaries to
be an RAII class, but then I noticed that this code used a VEC, so I
went ahead and did a bit more C++-ification, changing
stack_temporaries_enabled to a bool and changing stack_temporaries to
a std::vector.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-08 Tom Tromey <tom@tromey.com>
* infcall.c (struct call_return_meta_info)
<stack_temporaries_enabled>: Remove.
(get_call_return_value, call_function_by_hand_dummy): Update.
* thread.c (disable_thread_stack_temporaries): Remove.
(enable_thread_stack_temporaries): Remove.
(thread_stack_temporaries_enabled_p): Return bool.
(push_thread_stack_temporary, value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Update.
* eval.c (evaluate_subexp): Update.
* gdbthread.h (class enable_thread_stack_temporaries): Now a
class, not a function.
(value_ptr, value_vec): Remove typedefs.
(class thread_info) <stack_temporaries_enabled>: Now bool.
<stack_temporaries>: Now a std::vector.
(thread_stack_temporaries_enabled_p)
(value_in_thread_stack_temporaries): Return bool.
In remote.c, when the output of "set debug remote" is truncated, the
number of characters reported is incorrect. What is reported is the
number of characters added by the quoting, not the number of characters
that were truncated.
gdb/ChangeLog:
* remote.c (putpkt_binary): Fix omitted bytes reporting.
(getpkt_or_notif_sane_1): Likewise.
Using std::string here makes the string building simpler thank playing
with char*. A stack allocation is replaced with heap allocation, but
I don't think this is really performance-critical code.
gdb/ChangeLog:
* build-id.c (build_id_to_debug_bfd): Use std::string.
This patch makes the find_separate_debug_file* functions return
std::string, which allows to get rid of some manual memory management
and one cleanup.
gdb/ChangeLog:
* build-id.c (find_separate_debug_file_by_buildid): Return
std::string.
* build-id.h (find_separate_debug_file_by_buildid): Return
std::string.
* coffread.c (coff_symfile_read): Adjust to std::string.
* elfread.c (elf_symfile_read): Adjust to std::string.
* symfile.c (separate_debug_file_exists): Change parameter to
std::string.
(find_separate_debug_file): Return std::string.
(find_separate_debug_file_by_debuglink): Return std::string.
* symfile.h (find_separate_debug_file_by_debuglink): Return
std::string.
[This patch should go on top of "linux_qxfer_libraries_svr4: Use
std::string", I should have sent them together as a series.]
I noticed that linux_qxfer_libraries_svr4 used xml_escape_text, which
returns an std::string. That string is then copied into a larger
buffer. It would be more efficient if we had a version of
xml_escape_text which appended to an existing string instead of
returning a new one. This is what this patch does.
I manually verified that the output of linux_qxfer_libraries_svr4 didn't
change before/after the patch.
gdb/ChangeLog:
* common/xml-utils.c (xml_escape_text): Move code to...
(xml_escape_text_append): ... this new function.
* common/xml-utils.h (xml_escape_text_append): New declaration.
* unittests/xml-utils-selftests.c (test_xml_escape_text_append):
New function.
(_initialize_xml_utils): register test_xml_escape_text_append as
a selftest.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_qxfer_libraries_svr4): Use
xml_escape_text_append.
As described here
https://sourceware.org/bugzilla/show_bug.cgi?id=22841
there seems to be situations where the remote-stdio-gdbserver board
fails to delete the uploaded binary file. Passing "target" fixes the
issue for Christian who reported the bug.
I did not experience this problem, but passing "target" to remote_exec
still works for me, so I'm fine with changing it.
Any objection?
gdb/testsuite/ChangeLog:
PR gdb/22841
* boards/remote-stdio-gdbserver.exp (${board}_file): Pass
"target" to remote_exec.
Before patch
Make native gdbserver boards no longer be "remote" (in DejaGnu terms)
739b3f1d8f
the local gdbserver boards (except native-extended-gdbserver...) were
considered as remote by DejaGNU. To avoid DejaGNU trying to use ssh/scp
to download the files to the target (which is actually local), the
gdbserver-base.exp file defined some _download, _upload and _file board
operations to override the default behavior, and instead just use local
operations.
The same patch also changed remote-stdio-gdbserver.exp to make it
inherit from gdbserver-base.exp. Since then, this board (which is
actually remote) uses the overrides with local file operations. As a
result, files are never actually copied to the target.
I think we can simply remove the overrides from gdbserver-base.exp.
Because all boards should be properly considered local or remote by
DejaGNU, it should by default use the right method for transferring
files.
gdb/testsuite/ChangeLog:
PR gdb/22841
* boards/gdbserver-base.exp (${board}_file, ${board}_download,
${board}_upload): Remove.
This changes to_fileio_readlink and target_fileio_readlink to return a
gdb::optional<std::sring>, and then fixes up the callers and
implementations. This allows the removal of some cleanups.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-07 Tom Tromey <tom@tromey.com>
* linux-tdep.c (linux_info_proc): Update.
* target.h (struct target_ops) <to_fileio_readlink>: Return
optional<string>.
(target_fileio_readlink): Return optional<string>.
* remote.c (remote_hostio_readlink): Return optional<string>.
* inf-child.c (inf_child_fileio_readlink): Return
optional<string>.
* target.c (target_fileio_readlink): Return optional<string>.
The regcache cooked_read test needs to know which architectures have a
save_reggroup, riscv does and needs adding to the list.
gdb/ChangeLog:
* regcache.c (cooked_read_test): Add riscv to the list of
architectures that have a save_reggroup.
Some of the watchpoint logic depends on the fact that the head of the
value chain represents the user-specified value to watch. Thus no
additional values should be added to the value chain after that. However,
if a watchpoint is defined for a C++ structure/class object, then run-time
type information (RTTI) may be present. Thus, while constructing the
value chain for the watchpoint, the dynamic type is fetched by
gnuv3_rrti_type, which invokes value_addr, which then adds a new value to
the head of the value chain. This new value represents the pointer to the
structure instead of the structure itself.
With such a "polluted" value chain the watchpoint logic does not recognize
when the user intended to watch a struct, and can_use_hardware_watchpoint
returns zero. Instead of a hardware watchpoint, a software watchpoint
will then be set for no apparent reason.
This is fixed by adding an early exit to gnuv3_rtti_type when the input
value is not a dynamic class object.
gdb/testsuite/ChangeLog:
* gdb.cp/watch-cp.cc: New test.
* gdb.cp/watch-cp.exp: New file.
gdb/ChangeLog:
* gnu-v3-abi.c (gnuv3_rtti_type): Add early exit if the given
value is not a dynamic class object.
I noticed a few formatting buglets in rust-exp.y: A couple of lines
were too long, and a couple of parser rules did not follow the same
formatting as the rest of the code.
I'm checking this in as obvious. Tested by rebuilding.
2018-03-06 Tom Tromey <tom@tromey.com>
* rust-exp.y: Formatting fixes.
Some parts of the target description support were committed with the
initial riscv patch. As target descriptions are not currently supported
on riscv this commit removes the two pieces for code that relate to
target description support.
It is expected that target description support will be added in the
future, at which point this, or similar code will be added back.
gdb/ChangeLog:
* riscv-tdep.c (riscv_register_name): Remove target description
support.
(riscv_gdbarch_init): Remove target description check.
The GDB coding standard states these lines should never have been
added.
gdb/ChangeLog:
* riscv-tdep.c: Remove 'Contributed by ...' lines from header
comment.
* riscv-tdep.h: Likewise.
The code making use of pseudo registers was initially intended to
support running 32-bit ABI files on 64-bit riscv targets. However, the
implementation was incomplete, and broken.
For now I've removed all reference to pseudo registers from the riscv
target, we've not lost any functionality, and this cleans up failures in
the selftests.
Once the riscv target has matured a little we'll probably end up
bringing back some of the use of pseudo registers in order to better
support running 32-bit executables on a 64-bit target.
gdb/ChangeLog:
* riscv-tdep.c (riscv_pseudo_register_read): Delete.
(riscv_pseudo_register_write): Delete.
(riscv_gdbarch_init): Remove all use of pseudo registers.
This patch replaces the cleanups that close the list and tuple of the
btrace instruction history output with ui_out_emit_tuple and
ui_out_emit_list.
This allows removing make_cleanup_ui_out_tuple_begin_end and
make_cleanup_ui_out_list_begin_end.
This patch (along with the previous ones in the series) was regtested on
the buildbot.
gdb/ChangeLog:
* record-btrace.c (btrace_print_lines): Replace cleanup
parameter with RAII equivalents.
(btrace_insn_history): Replace cleanup with RAII equivalents.
* ui-out.h (make_cleanup_ui_out_list_begin_end,
make_cleanup_ui_out_tuple_begin_end): Remove.
* ui-out.c (struct ui_out_end_cleanup_data, do_cleanup_end,
make_cleanup_ui_out_end, make_cleanup_ui_out_tuple_begin_end,
make_cleanup_ui_out_list_begin_end): Remove.
This patch replaces two VEC(tp_t) with std::vector<thread_info *>, which
allows to remove two cleanups. To make it easier to map the old code to
the new code, I added the ordered_remove and unordered_remove functions,
which operate on std::vector and do the same as VEC's
ordered_remove/unordered_remove.
gdb/ChangeLog:
* record-btrace.c (record_btrace_maybe_mark_async_event): Change
parameter types to std::vector. Use bool.
(record_btrace_wait): Replace VEC(tp_t) with
std::vector<thread_info *>.
* common/gdb_vecs.h (unordered_remove, ordered_remove): New.
This patch removes a cleanup that disables btrace on threads in case of
failure, so we don't leave it enabled for some the threads and disabled
for the rest.
gdb/ChangeLog:
* record-btrace.c (record_btrace_disable_callback): Remove.
(struct scoped_btrace_disable): New.
(record_btrace_open): Use scoped_btrace_disable.
Should use a ULONGEST when reading from the regcache.
gdb/ChangeLog:
* riscv-tdep.c (riscv_return_value): Change type to ULONGEST for
reading values from registers.
Some of the format strings used in the new riscv target were incorrect,
resulting in build failures on some hosts. This commit does the
following:
1. Uses core_addr_to_string for formatting CORE_ADDR types.
2. Fixes legacy use of stderr for logging in one place that got
missed, instead gdb_stdlog is used.
3. Re-indent a few printf related lines that were wrong.
This should resolve some (but not all) of the build failures the new
riscv target introduced.
gdb/ChangeLog:
* riscv-tdep.c (riscv_print_arg_location): Add header comment,
change parameter type. Use GDB's print functions, and use
core_addr_to_string where appropriate.
(riscv_push_dummy_call): Use core_addr_to_string where
appropriate, update call to riscv_print_arg_location, and reindent
a few lines.
(riscv_return_value): Update call to riscv_print_arg_location.
This commit introduces basic support for baremetal RiscV as a GDB
target. This target is currently only tested against the RiscV software
simulator, which is not included as part of this commit. The target has
been tested against the following RiscV variants: rv32im, rv32imc,
rv32imf, rv32imfc, rv64im, rv64imc, rv64imfd, rv64imfdc.
Across these variants we pass on average 34858 tests, and fail 272
tests, which is ~0.8%.
The RiscV has a feature of its ABI where structures with a single
floating point field, a single complex float field, or one float and
one integer field are treated differently for argument passing. The
new test gdb.base/infcall-nested-structs.exp is added to cover this
feature. As passing these structures should work on all targets then
I've made the test as a generic one, even though, for most targets,
there's probably nothing special about any of these cases.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add riscv-tdep.o
(HFILES_NO_SRCDIR): Add riscv-tdep.h.
(ALLDEPFILES): Add riscv-tdep.c
* configure.tgt: Add riscv support.
* riscv-tdep.c: New file.
* riscv-tdep.h: New file.
* NEWS: Mention new target.
* MAINTAINERS: Add entry for riscv.
gdb/testsuite/ChangeLog:
* gdb.base/infcall-nested-structs.exp: New file.
* gdb.base/infcall-nested-structs.c: New file.
* gdb.base/float.exp: Add riscv support.
In some cases passing an argument to a function on amd64, or attempting
to fetch the return value, can trigger an assertion failure within GDB.
An example of a type that would trigger such an error is:
struct foo_t
{
long double a;
struct {
struct {
/* Empty. */
} es1;
} s1;
};
GCC does permit empty structures, so we should probably support this.
The test that exposes this bug is in the next commit along with the
RiscV support.
gdb/ChangeLog:
* amd64-tdep.c (amd64_classify_aggregate): Ignore zero sized
fields within aggregates.
This function can take the flags as the gdb_disassembly_flags type
instead of int.
gdb/ChangeLog:
* record-btrace.c (btrace_print_lines): Change type of flags to
gdb_disassembly_flags.
Use the signal code from siginfo_t to distinguish SIGTRAP events due
to trace traps (TRAP_TRACE) and software breakpoints (TRAP_BRKPT).
For software breakpoints, adjust the PC when the event is reported as
part of the API when supplying "stopped_by_sw_breakpoint". Currently
FreeBSD only supports hardware watchpoints and breakpoints on x86
which are reported as trace traps. Signal information is not used on
MIPS and sparc64 kernels which do not reliably report TRAP_BRKPT for
software breakpoints.
gdb/ChangeLog:
* fbsd-nat.c: Include "inf-ptrace.h".
(USE_SIGTRAP_SIGINFO): Conditionally define.
[USE_SIGTRAP_SIGINFO] (fbsd_handle_debug_trap): New function.
(fbsd_wait) [USE_SIGTRAP_SIGINFO]: Call "fbsd_handle_debug_trap".
[USE_SIGTRAP_SIGINFO] (fbsd_stopped_by_sw_breakpoint): New
function.
[USE_SIGTRAP_SIGINFO] (fbsd_supports_stopped_by_sw_breakpoint):
Likewise.
[USE_SIGTRAP_SIGINFO] (fbsd_supports_stopped_by_hw_breakpoint):
Likewise.
(fbsd_nat_add_target) [USE_SIGTRAP_SIGINFO]: Set
"stopped_by_sw_breakpoint", "supports_stopped_by_sw_breakpoint",
"supports_stopped_by_hw_breakpoint" target methods.
For now this just logs information about the state of the current LWP
for each STOPPED event in fbsd_wait().
gdb/ChangeLog:
* NEWS (Changes since GDB 8.1): Add "set/show debug fbsd-nat".
* fbsd-nat.c (debug_fbsd_nat): New variable.
(show_fbsd_nat_debug): New function.
(fbsd_wait): Log LWP info if "debug_fbsd_nat" is enabled.
(_initialize_fbsd_nat): Add "fbsd-nat" debug boolean command.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging Output): Document "set/show debug
fbsd-nat".
Report that a thread is stopped by a hardware breakpoint if a non-data
watchpoint is set in DR6. This change should be a no-op since a target
still needs to implement the "to_supports_stopped_by_hw_breakpoint"
method before this function is used.
gdb/ChangeLog:
* nat/x86-dregs.c (x86_dr_stopped_by_hw_breakpoint): New function.
* nat/x86-dregs.h (x86_dr_stopped_by_hw_breakpoint): New
prototype.
* x86-nat.c (x86_stopped_by_hw_breakpoint): New function.
(x86_use_watchpoints): Set "stopped_by_hw_breakpoint" target
method.
Unless I'm missing something very obvious, this xstrdup seems
unnecessary to me. We can pass "mode" directly to sprintf.
gdb/gdbserver/ChangeLog:
* server.c (handle_general_set): Remove unnecessary xstrdup.
This patch makes the charset list an std::vector instead of a VEC.
Because we must have access to the raw pointers as a simple array, we
can't use a vector of unique_ptr/unique_xmalloc_ptr. Therefore, wrap
the vector in a simple class to facilitate the cleanup. This allows
removing one usage of free_char_ptr_vec.
gdb/ChangeLog:
* charset.c (struct charset_vector): New.
(charsets): Change type to charset_vector.
(find_charset_names): Adjust.
(add_one): Adjust.
(_initialize_charset): Adjust.
This patch makes program_space a C++ object by adding a
constructor/destructor, giving default values to fields, and using
new/delete.
gdb/ChangeLog:
* progspace.h (struct program_space): Add constructor and
destructor, initialize fields.
(add_program_space): Remove.
* progspace.c (add_program_space): Rename to...
(program_space::program_space): ... this.
(release_program_space): Rename to...
(program_space::~program_space): ... this.
(delete_program_space): Use delete to delete program_space.
(initialize_progspace): Use new to allocate program_space.
* inferior.c (add_inferior_with_spaces): Likewise.
(clone_inferior_command): Likewise.
* infrun.c (follow_fork_inferior): Likewise.
(handle_vfork_child_exec_or_exit): Likewise.
This patch makes delim_string_to_char_ptr_vec and all related functions
use std::vector of gdb::unique_xmalloc_ptr. This allows getting rid of
make_cleanup_free_char_ptr_vec. Returning a vector of
unique_xmalloc_ptr instead of std::string allows to minimize the impacts
on the calling code. We can evaluate later whether we could/should
return a vector of std::strings instead.
gdb/ChangeLog:
* common/gdb_vecs.h (make_cleanup_free_char_ptr_vec): Remove.
(delim_string_to_char_ptr_vec): Return std::vector of
gdb::unique_xmalloc_ptr.
(dirnames_to_char_ptr_vec_append): Take std::vector of
gdb::unique_xmalloc_ptr.
(dirnames_to_char_ptr_vec): Return std::vector of
gdb::unique_xmalloc_ptr.
* common/gdb_vecs.c (delim_string_to_char_ptr_vec_append):
Take std::vector of gdb::unique_xmalloc_ptr, adjust the code.
(delim_string_to_char_ptr_vec): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(dirnames_to_char_ptr_vec_append): Take an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(dirnames_to_char_ptr_vec): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
* auto-load.c (auto_load_safe_path_vec): Change type to
std::vector of gdb::unique_xmalloc_ptr.
(auto_load_expand_dir_vars): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(auto_load_safe_path_vec_update): Adjust.
(filename_is_in_auto_load_safe_path_vec): Adjust.
(auto_load_objfile_script_1): Adjust.
* build-id.c (build_id_to_debug_bfd): Adjust.
* linux-thread-db.c (thread_db_load_search): Adjust.
* source.c (add_path): Adjust.
(openp): Adjust.
* symfile.c (find_separate_debug_file): Adjust.
* utils.c (do_free_char_ptr_vec): Remove.
(make_cleanup_free_char_ptr_vec): Remove.
gdb/gdbserver/ChangeLog:
* server.c (parse_debug_format_options): Adjust to
delim_string_to_char_ptr_vec changes.
* thread-db.c (thread_db_load_search): Adjust to
dirnames_to_char_ptr_vec changes.
commit b4987c956d
Author: Sergio Durigan Junior <sergiodj@redhat.com>
Date: Fri Feb 9 18:44:59 2018 -0500
Create new common/pathstuff.[ch]
Introduced a regression when compiling for mingw*:
/gdb/common/pathstuff.c: In function 'gdb::unique_xmalloc_ptr<char>
gdb_realpath(const char*)':
/gdb/common/pathstuff.c:56:14: error: 'MAX_PATH' was not declared in this scope
char buf[MAX_PATH];
^
/gdb/common/pathstuff.c:57:5: error: 'DWORD' was not declared in this scope
DWORD len = GetFullPathName (filename, MAX_PATH, buf, NULL);
^
/gdb/common/pathstuff.c:57:11: error: expected ';' before 'len'
DWORD len = GetFullPathName (filename, MAX_PATH, buf, NULL);
^
/gdb/common/pathstuff.c:63:9: error: 'len' was not declared in this scope
if (len > 0 && len < MAX_PATH)
^
/gdb/common/pathstuff.c:64:54: error: 'buf' was not declared in this scope
return gdb::unique_xmalloc_ptr<char> (xstrdup (buf));
^
make[2]: *** [pathstuff.o] Error 1
The proper fix is to conditionally include "<windows.h>". This commit
does that, without introducing any regressions as per tests made by
our BuildBot.
gdb/ChangeLog:
2018-03-01 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/22907
* common/pathstuff.c: Conditionally include "<windows.h>".
While using @progbits in .pushsection work on some targets, it does not
work on arm target where this introduces a comment. This patch replaces
its use in gdb.dlang/watch-loc.c and gdb.mi/dw2-ref-missing-frame-func.c
by %progbits which should work on all targets since it is used in
target-independent elf/section7.s GAS test.
2018-03-02 Thomas Preud'homme <thomas.preudhomme@arm.com>
gdb/testsuite/
* gdb.dlang/watch-loc.c: Use %progbits instead of @progbits.
* gdb.mi/dw2-ref-missing-frame-func.c: Likewise.
The gcore shell script (gdb/gcore.in) doesn't quote its variables
enough.
For example, trying to write a core file with - say - a space
ungraciously fails like this:
$ gcore -o 'foo bar' 6270
/usr/bin/gcore: line 92: [: foo: binary operator expected
gcore: failed to create foo bar.6270
Similarly, one can inject meta characters like * (by accident)
that may yield unexpected results, e.g. as in:
$ gcore -o foobar '*'
This change fixes these issues in several places.
Aso, since the script uses array syntax, the patch changes the
the shell in the first line from `/bin/sh` to /bin/bash`.
POSIX doesn't specify the array syntax for shell, thus, the
script doesn't work on systems where /bin/sh is linked to - say -
dash.
Since the source gcore.in already is processed by a pre-processor
one could even auto-detect the path to bash and thus dynamically
generate the first line. For systems where bash isn't available
via /bin/bash. But I think this would be overkill and /bin/bash
is good enough as most systems probably have it.
gdb/ChangeLog:
PR gdb/22888
* gcore.in: Quote variables and switch interpreter to bash.
Pedro pointed out that some Rust tests were failing after the recent
enum change. I was able to reproduce this even with the most current
Rust compiler -- no test was failing, but rather the gdb internal
error was causing an "untested" result, which I didn't notice.
The internal error is caused by a bad assertion in
alloc_discriminant_info. This happened because, in an earlier version
of the patch, the discriminant could only appear at index 0. However,
it can now appear anywhere. This patch fixes the assertion in the
obvious way, and adds a second assertion to ensure that the
discriminant is also correct.
Fixing this revealed a real failure, which was caused by using the
wrong base name when computing the name of a univariant enum's sole
member. This is also fixed here.
Tested by running the gdb.rust tests with rustc 1.23 and
double-checking the summary:
# of expected passes 276
Note that if you try this yourself, it is still possible to get an
"untested" result from traits.exp if your Rust compiler is old enough.
2018-03-01 Tom Tromey <tom@tromey.com>
* dwarf2read.c (alloc_discriminant_info): Fix default_index
assertion. Add assertion for discriminant_index.
(quirk_rust_enum): Use correct base type name in univariant case.
These flags are returned as an int by get_call_history_modifiers, and
get cast back to record_print_flags in the btrace code. Instead, we can
make the arguments of that type from start to end.
gdb/ChangeLog:
* record.c (get_call_history_modifiers): Return a
record_print_flags.
(cmd_record_call_history): Adjust.
* record-btrace.c (record_btrace_call_history): Adjust.
(record_btrace_call_history_range): Adjust.
(record_btrace_call_history_from): Adjust.
* target-debug.h (target_debug_print_record_print_flags): New.
* target-delegates.c: Re-generate.
* target.c (target_call_history): Change flags type.
(target_call_history_from): Likewise.
(target_call_history_range): Likewise.
* target.h (struct target_ops) <target_call_history>: Likewise.
(target_call_history_from): Likewise.
(target_call_history_range): Likewise.
By removing the supports_btrace gdbserver target method we relied on GDB
trying to enable branch tracing and failing on the attempt.
For targets that do not provide the btrace methods, however, an initial
request from GDB for the branch trace configuration to detect whether
gdbserver is already recording resulted in a protocol error.
Have the btrace target methods throw a "Target does not suppor branch
tracing" error and be prepared to handle exceptions in all functions that
call btrace target methods. We therefore turn the target_* macros into
static inline functions.
Also remove the additional btrace target method checks that resulted in
the above protocol error.
Thanks to Maciej W. Rozycki <macro@mips.com> for reporting this.
gdbserver/
* target.h (target_enable_btrace, target_disable_btrace)
(target_read_btrace, target_read_btrace_conf): Turn macro into
inline function. Throw error if target method is not defined.
* server.c (handle_qxfer_btrace, handle_qxfer_btrace_conf): Remove
check for btrace target method. Be prepared to handle exceptions
from btrace target methods.
I forgot to address Pedro's comment about my last patch and change the
order of the message printed when getcwd returns NULL on gdbserver.
This obvious commit does it.
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (captured_main): Change order of error message printed
when the current working directory cannot be found.
Simon mentioned on IRC that, after the startup-with-shell feature has
been implemented on gdbserver, it is not possible to specify a
filename-only binary, like:
$ gdbserver :1234 a.out
/bin/bash: line 0: exec: a.out: not found
During startup program exited with code 127.
Exiting
This happens on systems where the current directory "." is not listed
in the PATH environment variable. Although including "." in the PATH
variable is a possible workaround, this can be considered a regression
because before startup-with-shell it was possible to use only the
filename (due to reason that gdbserver used "exec*" directly).
The idea of the patch is to verify if the program path provided by the
user (or by the remote protocol) contains a directory separator
character. If it doesn't, it means we're dealing with a filename-only
binary, so we call "gdb_abspath" to properly expand it and transform
it into a full path. Otherwise, we leave the program path untouched.
This mimicks the behaviour seen on GDB (look at "openp" and
"attach_inferior", for example).
I am also submitting a testcase which exercises the scenario described
above. This test requires gdbserver to be executed in a different CWD
than the original, so I also created a helper function, "with_cwd" (on
testsuite/lib/gdb.exp), which takes care of cd'ing into and out of the
specified dir.
Built and regtested on BuildBot, without regressions.
gdb/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
Simon Marchi <simon.marchi@polymtl.ca>
* common/common-utils.c: Include "sys/stat.h".
(is_regular_file): Move here from "source.c"; change return
type to "bool".
* common/common-utils.h (is_regular_file): New prototype.
* common/pathstuff.c (contains_dir_separator): New function.
* common/pathstuff.h (contains_dir_separator): New prototype.
* source.c: Don't include "sys/stat.h".
(is_regular_file): Move to "common/common-utils.c".
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c: Include "filenames.h" and "pathstuff.h".
(program_name): Delete variable.
(program_path): New anonymous class.
(get_exec_wrapper): Use "program_path" instead of
"program_name".
(handle_v_run): Likewise.
(captured_main): Likewise.
(process_serial_event): Likewise.
gdb/testsuite/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.server/abspath.exp: New file.
* lib/gdb.exp (with_cwd): New procedure.
Tom Tromey
Simon Marchi
Keith Seitz
Alan Hayward
Pedro Alves
Weimin Pan
Andrew Burgess
Andreas Arnez
Pedro Franco de Carvalho
Simon Marchi
Stephen Roberts
Yao Qi
Yao Qi
Eli Zaretskii
John Baldwin
Sergio Durigan Junior
Thomas Preud'homme
Georg Sauthoff
Markus Metzger