Rename and move inferior_thread_state and inferior_status.
* gdbthread.h (struct thread_control_state): New struct, move fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step and stop_bpstat here from struct thread_info.
(struct thread_suspend_state): New struct, move field stop_signal here
from struct thread_info.
(struct thread_info): Move the fields above from this struct.
* inferior.h: Move the inferior_thread_state and inferior_status
declarations comment to their definitions at infrun.c.
(struct inferior_control_state): New struct, move field stop_soon from
struct inferior here.
(struct inferior_suspend_state): New empty struct.
(struct inferior): New fields control and suspend. Move out field
stop_soon.
* infrun.c (struct inferior_thread_state): Rename to ...
(infcall_suspend_state): ... here. Replace field stop_signal by
fields thread_suspend and inferior_suspend.
(save_inferior_thread_state): Rename to ...
(save_infcall_suspend_state): ... here. New variable inf. Update the
code for new fields.
(restore_inferior_thread_state): Rename to ...
(restore_infcall_suspend_state): ... here. New variable inf. Update
the code for new fields.
(do_restore_inferior_thread_state_cleanup): Rename to ...
(do_restore_infcall_suspend_state_cleanup): ... here.
(make_cleanup_restore_inferior_thread_state): Rename to ...
(make_cleanup_restore_infcall_suspend_state): ... here.
(discard_inferior_thread_state): Rename to ...
(discard_infcall_suspend_state): ... here.
(get_inferior_thread_state_regcache): Rename to ...
(get_infcall_suspend_state_regcache): ... here.
(struct inferior_status): Rename to ...
(struct infcall_control_state): ... here. Replace fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step, stop_bpstat and stop_soon by fields thread_control and
inferior_control.
(save_inferior_status): Rename to ...
(save_infcall_control_state): ... here. Update the code for new
fields.
(restore_inferior_status): Rename to ...
(restore_infcall_control_state): ... here. Update the code for new
fields.
(do_restore_inferior_status_cleanup): Rename to ...
(do_restore_infcall_control_state_cleanup): ... here.
(make_cleanup_restore_inferior_status): Rename to ...
(make_cleanup_restore_infcall_control_state): ... here.
(discard_inferior_status): Rename to ...
(discard_infcall_control_state): ... here.
* alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h,
exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c,
inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c,
mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the
references to the moved fields and renamed functions.
* python/py-breakpoint.c (BPPY_REQUIRE_VALID): Check if bp is
NULL.
(BPPY_SET_REQUIRE_VALID): Ditto.
(bpnum_is_valid): Delete function.
(bppy_get_visibility): New function.
(bppy_new): Parse for, and validate internal keyword. Pass
internal keyword to breakpoint or watchpoint functions.
(build_bp_list): New function.
(gdbpy_breakpoints): Rewrite. Use build_bp_list and
iterate_over_breakpoints.
(gdbpy_breakpoint_created): Rewrite. Do not store breakpoints in a
look-aside vector.
(gdbpy_breakpoint_deleted): Rewrite, defer breakpoint management
to internal breakpoint chain.
* breakpoint.c (set_breakpoint_number): New function.
(breakpoint_1): Check if breakpoint number is more than zero.
(set_raw_breakpoint_without_location): Set py_bp_object to NULL.
(create_breakpoint_sal): Take a new parameter called internal.
Call set_breakpoint_number with internal parameter. Do not
mention internal breakpoints. All callers updated.
(create_breakpoint): Ditto.
(create_breakpoints_sal): Ditto.
(watch_command_1): Ditto.
(watch_command_wrapper): Take a new parameter called internal.
All callers updated.
(rwatch_command_wrapper): Ditto.
(awatch_command_wrapper): Ditto.
(save_breakpoints): Update breakpoint save condition check.
(iterate_over_breakpoints): New function.
* breakpoint.h: Add conditional python includes. Add py_bp_object
and comment to struct breakpoint. Update all callers.
* defs.h: Add PyObject definition for GDB builds without Python.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Breakpoints In Python): Document "internal"
parameter, and visible attribute.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: Add internal watchpoint and
breakpoint tests.
PR mi/11407
* mi/mi-cmd-stack.c (list_args_or_locals): Catch exceptions from
read_var_value and common_val_print and print a warning.
2010-09-16 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
PR mi/11407
* gdb.mi/dw2-ref-missing-frame-func.c: New File.
* gdb.mi/dw2-ref-missing-frame-main.c New File.
* gdb.mi/dw2-ref-missing-frame.S New File.
* gdb.mi/dw2-ref-missing-frame.exp New File.
as a feature reported by -list-target-features.
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document new
feature `reverse' output by -list-target-features.
* mi/mi-cmd-break.c: White space.
* mi/mi-cmd-env.c: White space.
* mi/mi-cmds.c: White space.
* mi/mi-cmd-stack.c: White space.
* mi/mi-cmd-var.c: White space.
* mi/mi-console.c: White space.
* mi/mi-getopt.c: White space.
* mi/mi-interp.c: White space.
* mi/mi-main.c: White space.
* mi/mi-out.c: White space.
* mi/mi-parse.c: White space.
Nathan Sidwell <nathan@codesourcery.com>
* breakpoint.c (breakpoint_1): Add filter argument, return number of
breakpoints printed.
(is_hardware_watchpoint): Make argument const.
(is_watchpoint): Ditto.
(is_tracepoint): Merge of tracepoint_type and breakpoint_is_tracepoint,
use it everywhere.
(breakpoints_info): Pass NULL to breakpoint_1.
(maintenance_info_breakpoints): Ditto.
(watchpoints_info): New function.
(tracepoints_info): Use breakpoint_1 filter.
(set_ignore_count): Warn that tracepoint ignore count will be ignored.
(_initialize_breakpoint): Make "info watchpoints" its own command.
* breakpoint.h (is_tracepoint): Rename from breakpoint_is_tracepoint.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Use is_tracepoint.
* gdb.texinfo (Setting Breakpoints): "info watch" no longer a synonym.
(Setting Watchpoints): Update description of "info watch".
(Disabling Breakpoints): Only "info break" lists all.
* gdb.base/completion.exp: Update for new "info watchpoints".
* gdb.base/default.exp: Ditto.
* gdb.base/help.exp: Ditto.
* gdb.base/watchpoint.exp: Ditto.
* gdb.trace/infotrace.exp: Update "info tracpoints" output.
* defs.h (read_command_lines, read_command_lines_1): New
parameters validator and closure.
* tracepoint.h (struct action_line): Remove.
* breakpoint.h (struct breakpoint): Remove the 'actions'
field.
* defs.h (enum command_control_type): New value
while_stepping_control.
(struct command_line): Add comments.
* breakpoint.c (breakoint_is_tracepoint): New.
(breakpoint_set_commands): For tracepoints,
verify the commands are permissible.
(check_tracepoint_commands): New.
(commands_command): Require that each new line is validated using
check_tracepoint_command, if we set commands for a tracepoint.
(create_tracepoint_from_upload): Likewise.
(print_one_breakpoint_location): Remove the code to print
actions specifically.
(tracepoint_save_command): Relay to print_command_lines.
* cli/cli-script.c (process_next_line): New parameters validator
and closure. Handle 'while-stepping'. Call validator if not null.
(read_command_lines, read_command_lines1): Likewise.
(recurse_read_control_structure): New parameters validator and
closure. Handle while_stepping_control.
(print_command_lines): Handle while-stepping.
(get_command_line, define_command, document_command): Adjust.
* remote.c (remote_download_tracepoint): Adjust.
* tracepoint.c (make_cleanup_free_actions, read_actions)
(free_actions, do_free_actions_cleanup): Remove.
(trace_actions_command): Use read_command_lines.
(validate_actionline): Use error in one place.
(encode_actions_1): New, extracted from...
(encode_actions): ...this. Also use cleanups for exception
safety.
(trace_dump_command): Adjust.
* mi/mi-cmd-break (mi_cmd_break_commands): Validate commands if
it's tracepoint.
* breakpoint.c (clear_syscall_counts): Take struct inferior*.
* inferior.c (add_inferior_silent): Notify inferior_added
observer.
(delete_inferior_1): Notify inferior_removed observer.
(exit_inferior_1): Pass inferior, not pid, to observer.
(inferior_appeared): Likewise.
(add_inferior_with_spaces): New.
(add_inferior_command): Use the above.
* inferior.h (delete_inferior_1, add_inferior_with_spaces):
Declare.
* inflow.c (inflow_inferior_exit): Likewise.
* jit.c (jit_inferior_exit_hook): Likewise.
* mi/mi-cmds.c (mi_cmds): Register add-inferior and
remove-inferior.
* mi/mi-cmds.h (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
* mi/mi-interp.c (mi_inferior_added, mi_inferior_removed): New.
(report_initial_inferior): New.
(mi_inferior_removed): Register the above. Make sure
inferior_added observer is called on the first inferior.
(mi_new_thread, mi_thread_exit): Thread group is now identified by
inferior number, not pid.
(mi_solib_loaded, mi_solib_unloaded): Report which inferiors are
affected.
* mi/mi-main.c (current_context): New.
(proceed_thread_callback): Use typed closure.
Proceed everything if pid is 0. Most implementation split into
(proceed_thread): ... this.
(run_one_inferior): New.
(mi_cmd_exec_continue, mi_cmd_exec_interrupt, mi_cmd_exec_run):
Adjust for multiexec behaviour.
(mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
(mi_cmd_execute): Handle the 'thread-group' option here.
Do some extra checks.
* mi-parse.c (mi_parse): Handle the --all and --thread-group
options.
* mi-parse.h (struct mi_parse): New fields all and thread_group.
* mi/mi-main.c: Added the --reverse flag to the following MI
commands: exec-continue, exec-finish, exec-next, exec-step,
exec-next-instruction, exec-step-instruction. This is to
support reverse execution over the MI interface to gdb.
whitespace character after a dot in comment.
(mi_cmd_stack_list_arguments, mi_cmd_stack_list_variables):
Likewise.
(list_args_or_locals): For the 'all' (that is
-stack-list-variables) case, always output list of tuples.
Output 'arg' field if variable is argument.
* infcmd.c (inferior_args): Rename to ...
(inferior_args_scratch): ... this.
(inferior_io_terminal): Rename to ...
(inferior_io_terminal_scratch): ... this.
(inferior_argc, inferior_argv): Remove.
(set_inferior_io_terminal, get_inferior_io_terminal): Store
inside current_inferior().
(set_inferior_tty_command, show_inferior_tty_command): New.
(get_inferior_args, set_inferior_args): Store inside
current_inferior().
(notice_args_set): Likewise and rename to...
(set_args_command): ... this.
(set_inferior_args_vector): Likewise.
(notice_args_read): Rename to...
(show_args_command): ...new.
(tty_command): Remove.
(run_command_1): Don't free old args, as they are freed by
set_inferior_arg now.
(run_no_args_command): Likewise.
(inferior_environ): Remove.
(run_command_1): Use environment of the current inferior.
(environment_info, set_environment_command)
(unset_environment_command, path_info, path_command): Likewise.
(_initialize_infcmd): Adjust for function and variable renames.
Do not init inferior_environ.
* inferior.h (set_inferior_arg): Adjust prototype.
(struct inferior): New fields args, argc, argv, terminal, environment.
(inferior_environ): Remove declaration.
* inferior.c (free_inferior): Free new fields.
(add_inferior_silent): Initialize 'environment' field.
* main.c (captured_main): Set arguments only after the initial
inferior has been created. Set set_inferior_io_terminal,
not tty_command.
* mi/mi-main.c (mi_cmd_env_path): Use environment of the current
inferior.
(_initialize_mi_cmd_env): Adjust for disappearance of global
inferior_environ.
* solib.c (solib_find): Use environment of the current inferior.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
(init_last_source_visited): Delete.
(directory_command): Do not clear last_source_visited. Call
forget_cached_source_info only if required.
(unset_substitute_path_command, set_substitute_path_command): Call
forget_cached_source_info.
* mi/mi-cmd-env.c (mi_cmd_env_dir): Do not call
init_last_source_visited.
* defs.h (init_last_source_visited): Delete declaration.
* mi/mi-cmds.c (mi_cmds): Register -stack-list-variables.
* mi/mi-cmd-stack.c (enum what_to_list): New.
(list_args_or_locals): Accept what_to_list parameter.
Use 'variables' as output name of all are requested.
(mi_cmd_stack_list_variables): New.
(mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Adjust.
* NEWS: Add note on new "set stack-cache" option.
* corefile.c (read_stack): New function.
* dcache.c (dcache_struct): New member ptid.
(dcache_enable_p): Mark as obsolete.
(show_dcache_enabled_p): Flag option as deprecated.
(dcache_invalidate): Update ptid.
(dcache_invalidate_line): New function.
(dcache_read_line): No longer check cacheable attribute, stack
accesses get cached despite attribute.
(dcache_init): Set ptid.
(dcache_xfer_memory): Flush cache if from different ptid than before.
Update cache after write.
(dcache_update): New function.
(dcache_info): Report ptid.
(_initialize_dcache): Update text for `remotecache' to indicate it
is obsolete.
* dcache.h (dcache_update): Declare.
* dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with
set_value_stack.
* frame-unwind.c (frame_unwind_got_memory): Ditto.
* gdbcore.h (read_stack): Declare.
* memattr.c (mem_enable_command): Call target_dcache_invalidate
instead of dcache_invalidate.
(mem_disable_command, mem_delete_command): Ditto.
* target.c (stack_cache_enabled_p_1): New static global.
(stack_cache_enabled_p): New static global.
(set_stack_cache_enabled_p): New function.
(show_stack_cache_enabled_p): New function.
(target_dcache): Make static.
(target_dcache_invalidate): New function.
(target_load, target_resume): Call target_dcache_invalidate
instead of dcache_invalidate.
(memory_xfer_partial): New arg object, all callers updated.
Check for existing inferior before calling dcache routines.
When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache.
(target_xfer_partial): Call memory_xfer_partial for
TARGET_OBJECT_STACK_MEMORY.
(target_read_stack): New function.
(initialize_targets): Install new option `stack-cache'.
* target.h: Remove #include of dcache.h.
(enum target_object): New value TARGET_OBJECT_STACK_MEMORY.
(target_dcache): Delete.
(target_dcache_invalidate): Declare.
(target_read_stack): Declare.
* top.c (prepare_execute_command): New function.
(execute_command): Call prepare_execute_command
instead of free_all_values.
* top.h (prepare_execute_command): Declare.
* valops.c (get_value_at): New function.
(value_at): Guts moved to get_value_at.
(value_at_lazy): Similarly.
(value_fetch_lazy): Call read_stack for stack values.
* value.c (struct value): New member `stack'.
(value_stack, set_value_stack): New functions.
* value.h (value_stack, set_value_stack): Declare.
* mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command
instead of free_all_values.
doc/
* gdb.texinfo (Caching Data of Remote Targets): Update text.
Mark `set/show remotecache' options as obsolete.
Document new `set/show stack-cache' option.
Update text for `info dcache'.
Replace public function varobj_list by all_root_varobjs iterator.
* mi/mi-cmd-var.c (struct mi_cmd_var_update, mi_cmd_var_update_iter):
New.
(mi_cmd_var_update): Replace the varobj_list call by all_root_varobjs.
Remove the variables rootlist, cr. New variable data.
* varobj.c (rootcount, varobj_list): Remove.
(install_variable, uninstall_variable): Remove the rootcount updates.
(all_root_varobjs): New function.
(varobj_invalidate): Use the all_root_varobjs call. Move the code to...
(varobj_invalidate_iter): ... a new function.
* varobj.h (varobj_list): Remove the prototype.
(all_root_varobjs): New prototype.
* cli/cli-cmds.c (disassemble_command): Add a new modifier /r
to "disassemble" command to print the raw instructions in hex as
well as in symbolic form.
(init_cli_cmds): Ditto.
(print_disassembly): Change "mixed" to "flags" to translate
the behavior of disassemble.
(disassemble_current_function): Ditto.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
* stack.c (gdb_disassembly_stub): Ditto.
* disasm.c (do_mixed_source_and_assembly): Ditto.
(do_mixed_source_and_assembly): Ditto.
(do_assembly_only): Ditto.
(gdb_disassembly): Ditto.
(dump_insns): print the raw instructions in hex as well as in
symbolic form if DISASSEMBLY_RAW_INSN and flags is true.
* disasm.h (DISASSEMBLY_SOURCE): Include source code with the
assembly if it and flags is true.
(DISASSEMBLY_RAW_INSN): Include the raw instructions in hex with
the assembly if it and flags is true.
(gdb_disassembly): Update extern.
* NEWS: Document disassemble/r support.
Tidy up the code.
* mi/mi-cmd-var.c (mi_cmd_var_update): Remove variable nv. Move
variables var, rootlist and cr to their local sub-block. Move the
make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end
and do_cleanups calls to the common base block. Remove the zero NV
check.
(show_endian): Use target_byte_order_user if specified; otherwise
use get_current_arch () instead of current_gdbarch.
(show_architecture): Use set_architecture_string if specified;
otherwise use get_current_arch () instead of current_gdbarch.
(get_current_arch): New function.
* arch-utils.h (get_current_arch): Add prototype.
* osabi.c (show_osabi): Use get_current_arch () instead of
current_gdbarch.
* findcmd.c: Include "arch-utils.h".
(parse_find_args): Add BIG_P argument. Use it instead of byte order
of current_gdbarch.
(find_command): Use get_current_arch () instead of current_gdbarch.
Pass byte order to parse_find_args.
* maint.c: Include "arch-utils.h".
(maintenance_print_architecture): Use get_current_arch () instead
of current_gdbarch.
* reggroups.c: Include "arch-utils.h".
(maintenance_print_reggroups): Use get_current_arch () instead
of current_gdbarch.
* symfile.c: Include "arch-utils.h".
(overlay_load_command): Use get_current_arch () instead of
current_gdbarch.
* value.c: Include "arch-utils.h".
(show_convenience): Use get_current_arch () instead of
current_gdbarch.
* tui/tui-regs.c: Include "arch-utils.h".
(tui_reg_next_command): Use get_current_arch () instead of
current_gdbarch.
* mi/mi-main.c: Include "arch-utils.h".
(mi_cmd_data_read_memory): Use get_current_arch () instead of
current_gdbarch.
* parse.c: Include "arch-utils.h".
(parse_exp_in_context): Use get_current_arch () instead of
current_gdbarch.
* mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
frame architecture instead of current_gdbarch.
(mi_cmd_data_list_changed_registers): Likewise.
(mi_cmd_data_list_register_values): Likewise. Pass selected
frame to get_register.
(get_register): Add FRAME argument, use it as frame to retrieve
registers from (instead of selected frame). Use frame architecture
instead of current_gdbarch.
(mi_cmd_data_write_register_values): Use current regcache
architecture instead of current_gdbarch.
testsuite/ChangeLog:
* gdb.mi/gdb680.exp: Update test for error message.
Global renaming of find_thread_pid to find_thread_ptid.
* gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
* thread.c (find_thread_ptid): Renamed from find_thread_pid.
All callers updated.
gdbserver:
Global renaming of find_thread_pid to find_thread_ptid.
* server.h (find_thread_ptid): Renamed from find_thread_pid.
* inferiors.c (find_thread_ptid): Renamed from find_thread_pid.
All callers updated.
is the first inferior.
(startup_inferior): If the target support multi-process, tell it
to resume only the new process.
* linux-nat.c (num_lwps): Delete global.
(purge_lwp_list): New function.
(num_lwps): New function.
(add_lwp, delete_lwp): Adjust.
(ptid_match): New.
(iterate_over_lwps): Add filter argument. Handle it.
(linux_nat_attach): Remove FIXME note.
(linux_nat_detach): Adjust to iterate over threads of the inferior
we're detaching from. Adjust to num_lwps being a function. Don't
assume the head of the lwp list is the main thread of the process
we're detaching from. Don't destroy the LWP list.
(resume_callback): Add debug output.
(linux_nat_resume): Handle resuming a single inferior. Allow a
wildcard resume in non-stop mode.
(linux_handle_extended_wait): Don't assume inferior_ptid is the
correct inferior of the parent LWP.
(status_callback): Also check lp->waitstatus.
(select_event_lwp): Add new filter parameter. Handle it.
(linux_nat_filter_event): Adjust to num_lwps being a function.
(linux_nat_wait_1): When adding the first lwp of the inferior, use
an is_lwp check instead of checking for the number of lwps.
(linux_nat_wait_1): Handle waiting for a specific tgid. Handle
pending process exit statuses.
(linux_nat_mourn_inferior): Don't destroy all the LWP info.
Instead delete LWPs of the inferior that we're mourning. Don't
unregister from the event loop here.
(linux_nat_pid_to_str): Use `num_lwps'.
(linux_nat_make_corefile_notes): Adjust to walk over lwps of a
single inferior.
(linux_nat_is_async_p): Check if async was masked out.
(linux_multi_process): New global.
(linux_nat_supports_multi_process): New.
(linux_nat_stop_lwp): Remove LWP filtering. It is done by the
caller.
(linux_nat_stop): Adjust to make iterate_over_lwps itself do the
LWP filtering.
(linux_nat_close): New.
(linux_nat_add_target): Register linux_nat_close and
linux_nat_supports_multi_process.
* linux-nat.h (iterate_over_lwps): Add filter argument.
* linux-thread-db.c (thread_db_handle): Delete.
(proc_handle, thread_agent, td_init_p, td_ta_new_p)
(td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
(td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
(td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
(td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
longer globals, moved to...
(struct thread_db_info): ... this new structure.
(thread_db_list): New.
(add_thread_db_info, get_thread_db_info, delete_thread_db_info):
New.
(have_threads_callback): Filter out threads of all inferiors but
the one specified by the ARGS argument.
(have_threads): Add ptid argument specifying the inferior we're
interested in. Handle it.
(struct thread_get_info_inout): New.
(thread_get_info_callback, thread_from_lwp): Adjust to use it.
(thread_db_attach_lwp): Check that inferior of the passed in
thread is using thread-db. Adjust.
(enable_thread_event): Remove thread_agent parameter. Instead,
get it from the per-inferior thread-db info.
(dladdr_to_soname): Move higher up.
(enable_thread_event_reporting): Adjust to use per-inferior
thread-db info.
(try_thread_db_load_1): Replace `handle' parameter by a
thread_db_info parameter. Adjust to use per-inferior thread-db
info.
(try_thread_db_load): Adjust to use per-inferior thread-db info.
(thread_db_load, disable_thread_event_reporting): Ditto.
(check_for_thread_db): Remove conditional reporting of which
libthread_db is in use.
(thread_db_new_objfile): Add comment about inferior_ptid.
(attach_thread): Adjust to use per-inferior thread-db info.
(thread_db_detach): Adjust to use per-inferior thread-db info.
Remove thread event breakpoints of the current inferior. Only
unpush the thread-db target if there are no more processes using
it.
(check_event): Adjust to use per-inferior thread-db info.
(thread_db_wait): Adjust to use per-inferior thread-db info. Only
unpush the thread-db target if there are no more processes using
it.
(thread_db_mourn_inferior): Adjust to use per-inferior thread-db
info. Mark breakpoints of the current inferior out before
deleting them. Only unpush the thread-db target if there are no
more processes using it.
(find_new_threads_callback): Adjust to use per-inferior thread_db
info.
(thread_db_find_new_threads_1): Add new ptid argument. Adjust to
use per-inferior thread-db info.
(thread_db_find_new_threads): Adjust to use per-inferior thread-db
info.
(thread_db_get_thread_local_address): Adjust.
(thread_db_get_ada_task_ptid): Adjust.
* inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
if there no more processes left to debug.
* thread.c (set_running, set_executing): Handle resuming all
threads of a single inferior.
* mi/mi-interp.c (mi_output_running_pid): New.
(mi_inferior_count): New.
(mi_on_resume): For backwards compatibility, if resuming all
threads of an inferior, and there is only one inferior, output
"all".
target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
* mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
to the about_to_proceed observer notification.
(mi_about_to_proceed): New.
(mi_on_resume): Only output ^running and the prompt here if the
target was proceeded.
* breakpoint.c (breakpoint_proceeded): New static.
(breakpoint_about_to_proceed): New.
(_initialize_breakpoints): Attach breakpoint_about_to_proceed to
the about_to_proceed observer notification.
* inferior.h (breakpoint_proceeded): Delete declaration.
* infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
Notify the about_to_proceed observers.
(struct inferior_status): Delete breakpoint_proceeded member.
(save_inferior_status): Don't save it.
(restore_inferior_status): Don't restore it.
* mi-main.h (mi_proceeded): Declare.
* mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
a command.
gdb/doc/
* observer.texi (about_to_proceed): New.
Silence a few -Wmissing-prototypes warnings.
PR build/9877:
* amd64-nat.c: Include "amd64-nat.h".
* fork-child.c (_initialize_fork_child): Ditto.
* gcore.c (_initialize_gcore): Ditto.
* inf-ptrace.c: Include "inf-ptrace.h".
(inf_ptrace_store_registers): Make it static.
* linux-nat.c (linux_nat_terminal_ours): Make it static.
(_initialize_linux_nat): Declare before definition.
* linux-tdep.c: Include "linux-tdep.h".
* linux-thread-db.c (_initialize_thread_db): Declare before
definition.
* proc-service.c (_initialize_proc_service): Ditto.
* remote.c (remote_send_printf): Make it static.
* solib.c: Include "solib.h".
* symfile-mem.c (_initialize_symfile_mem): Declare before
definition.
* ada-lang.c (ada_la_decode, ada_match_name)
(ada_suppress_symbol_printing, ada_is_array_type)
(ada_value_ptr_subscript, ada_array_length)
(ada_to_static_fixed_value): Make them static.
(_initialize_ada_language): Declare before definition.
* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
(ada_task_list_changed, ada_new_objfile_observer): Make them
static.
(_initialize_tasks): Declare before definition.
* addrmap.c (_initialize_addrmap): Declare before definition.
* auxv.c (default_auxv_parse): Make it static.
* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
them static.
* breakpoint.c (remove_sal): Add line break.
(expand_line_sal_maybe): Make it static.
* cp-name-parser.y: Include "cp-support.h".
* cp-valprint.c (cp_find_class_member): Make it static.
* eval.c (value_f90_subarray): Ditto.
* exceptions.c (print_any_exception): Ditto.
* findcmd.c (_initialize_mem_search): Declare before definition.
* frame.c (frame_observer_target_changed): Make it static.
* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
* inf-child.c: Include "inf-child.h".
* inferior.h (valid_inferior_id): Rename to ...
(valid_gdb_inferior_id): ... this.
* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
Make them static.
* jv-lang.c (java_language_arch_info): Make it static.
* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
* osdata.c (info_osdata_command): Make it static.
* regcache.c (regcache_observer_target_changed): Make it static.
* reverse.c (_initialize_reverse): Declare before definition.
* stabsread.c (cleanup_undefined_types_noname)
(cleanup_undefined_types_1): Make them static.
* symfile.c (place_section): Make it static.
* symtab.c (find_pc_sect_psymtab_closer): Make it static.
* target-descriptions.c (_initialize_target_descriptions): Declare
before definition.
* target.c (default_get_ada_task_ptid, find_default_can_async_p)
(find_default_is_async_p, find_default_supports_non_stop): Make
them static.
(target_supports_non_stop): Add prototype.
(dummy_pid_to_str): Make it static.
* utils.c (_initialize_utils): Declare before definition.
* ada-exp.y (_initialize_ada_exp): Declare before definition.
* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
* target.h (struct target_ops): Add a prototype to the
to_can_execute_reverse callback.
* macroscope.c (_initialize_macroscope): Declare before definition.
* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
* python/python.c (_initialize_python): Declare before definition.
* tui/tui-command.c: Include "tui/tui-command.h".
* tui/tui-data.c (init_content_element, init_win_info): Make them
static.
* tui/tui-disasm.c: Include "tui/tui-disasm.h".
* tui/tui-interp.c (_initialize_tui_interp): Declare before
definition.
* tui/tui-layout.c: Include "tui/tui-layout.h".
(_initialize_tui_layout): Declare before definition.
* tui/tui-regs.c: Include "tui/tui-regs.h".
(tui_display_reg_element_at_line): Make it static.
(_initialize_tui_regs): Declare before definition.
* tui/tui-stack.c (_initialize_tui_stack): Declare before
definition.
* tui/tui-win.c: Include "tui/tui-win.h".
(_initialize_tui_win): Declare before definition.
(tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
(tui_get_cmd_list): Add a prototype.
* tui/tui-windata.c: Include tui-windata.h.
* tui/tui-wingeneral.c (box_win): Make it static.
* cli/cli-logging.c (show_logging_command): Make it static.
(_initialize_cli_logging): Declare before definition.
* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
definition.
(mi_interpreter_init): Register the above.
* solib.c (clear_solib): Notify solib unload.
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
disable breakpoints on a.out targets.
* ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
* infcmd.c (finish_command_continuation): Pass '1' for
'print_frame' parameter to the observer.
* infrun.c (normal_stop): Don't print mi-specific information
here. Pass 'stop_print_frame' to the 'print_frame' parameter
of the observer.
* mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
If we need to print frame, and current uiout is not the MI one,
print frame again.
(break_command_really, set_breakpoint): New parameter enabled.
(create_breakpoint, break_command_really): Make breakpoint
disabled if so requested.
* breakpoint.h (set_breakpoint): New parameter enabled.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
attribute in GLIBC 2.8.
* cli/cli-cmds.c (pwd_command): Check return value from getcwd.
* inflow.c (check_syscall): New function.
(new_tty): Use check_syscall to check return values from open and dup.
* linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
* main.c (captured_main): Call cwd after setting up gdb_stderr;
check for errors from getcwd.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
* ui-file.c (stdio_file_write): Ignore return value from fwrite.
(stdio_file_fputs): Same.
* utils.c (internal_vproblem): abort if last-ditch error message
write fails.
* mi/mi-common.h (struct mi_interp): New, moved from ...
* mi/mi-interp.c: ...here.
* mi/mi-main.c (mi_execute_command): If the thread changed
as result of command, report that.
* mi/mi-main.c (proceed_thread_callback): New.
(mi_cmd_exec_continue): If --thread-group is specified, resume all
threads in that group.
(interrupt_thread_callback): New.
(mi_cmd_exec_interrupt): If --thread-group is specified, interrupt
all threads in that group.
PR mi/2549:
* mi/mi-main.c (get_register): Use get_formatted_print_options.
gdb/testsuite
2008-11-14 Nick Roberts <nickrob@snap.net.nz>
* gdb.mi/gdb2549.exp: New file.
* infrun.c (context_switch): Don't save and load infrun state.
(context_switch_to): Delete.
* infcmd.c (proceed_thread_callback): Replace context_switch_to
calls by switch_to_thread calls.
* gdbthread.h (save_infrun_state, load_infrun_state): Delete.
* thread.c (main_thread_state, main_thread_executing): Delete.
(inferior_thread): Delete references to them.
(add_thread_silent): Fix case where we're adding a thread with the
same ptid as an exited thread. Remove references to
context-switching.
(load_infrun_state, save_infrun_state): Delete.
(thread_alive, is_thread_state, any_running, is_executing)
(set_executing): Remove the special handling for targets that
don't register any thread.
(restore_current_thread, thread_apply_all_command)
(do_captured_thread_select): Unconditionally call
switch_to_thread.
* mi/mi-main.c (mi_cmd_execute): Check for exited threads.
Call switch_to_thread instead of context_switch_to.
* gdbthread.h (find_thread_id): Declare.
* thread.c (find_thread_id): Make non-static.
* mi/mi-main.c (mi_cmd_execute): Switch to the right
thread and frame, if necessary.
* mi/mi-parse.c (mi_parse): Handle --thread and --frame.
* mi/mi-parse.h (strcut mi_parse): New fields thread and frame.
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
* gdbthread.h: Remove unneeded forward declarations.
Include "inferior.h".
(struct thread_info): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi and stop_signal members.
(save_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
(load_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
* thread.c (load_infrun_state): In non-stop mode, load
continuations, intermediate_continuations, proceed_to_finish,
step_over_calls, stop_step, step_multi and stop_signal.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(free_thread): Clear The thread's stop_bpstat.
* inferior.h (context_switch_to): Declare.
* infrun.c (ecss): New global.
(context_switch): Context switch continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(wait_for_inferior): Use global ecss.
(async_ecss, async_ecs): Delete.
(fetch_inferior_event): Use global ecss.
(context_switch_to): New.
* top.c (execute_command): In non-stop, only check if the current
thread is running, in all-stop, check if there's any thread
running.
* breakpoint.c (bpstat_remove_breakpoint): New.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Clear the stop_bpstats of all threads.
* mi/mi-main.c (mi_cmd_execute): In non-stop, only check if the
current thread is running, in all-stop, check if there's any
thread running.
* Makefile.in (gdbthread_h): Depend on $(inferior_h).
* inferior.h (target_executing): Delete.
* gdbthread.h (struct thread_info): Add executing_ field.
(set_executing, is_executing): New.
* thread.c (main_thread_executing): New.
(init_thread_list): Clear it and also main_thread_running.
(is_running): Return false if target has no execution.
(any_running, is_executing, set_executing): New.
* top.c: Include "gdbthread.h".
(target_executing): Delete.
(execute_command): Replace target_executing check by any_running.
* event-top.c: Include "gdbthread.h".
(display_gdb_prompt, command_handler): Replace target_executing by
is_running.
* inf-loop.c: Include "gdbthread.h". Don't mark as not executing
here. Replace target_executing by is_running.
* infrun.c (handle_inferior_event): Mark all threads as
not-executing.
* linux-nat.c (linux_nat_resume): Don't mark thread as executing
here.
* stack.c (get_selected_block): Return null if inferior is
executing.
* target.c (target_resume): Mark resumed ptid as executing.
* breakpoint.c (until_break_command): Replace target_executing
check by is_executing.
* remote.c (remote_async_resume): Don't mark inferior as executing
here.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing
by any_running.
* mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute)
(mi_execute_async_cli_command): Replace target_executing by
is_running.
* frame.c (get_current_frame): Error out if the current thread is
executing.
(has_stack_frames): New.
(get_selected_frame, deprecated_safe_get_selected_frame): Check
has_stack_frames.
* Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on
$(gdbthread_h).
-target-download and -target-select via CLI, so that
the quoting rules are the same as they were (unfortunately)
in all prior gdb releases.
* mi/mi-cmds.h (mi_cmd_exec_run, mi_cmd_exec_until)
(mi_cmd_target_download, mi_cmd_target_select): Remove.
* mi/mi-main.c (mi_cmd_exec_run, mi_cmd_exec_until)
(mi_cmd_target_download, mi_cmd_target_select): Remove.
(mi_cmd_execute): Set current_token even for commands
routed via CLI.
(captured_mi_execute_command_args): Remove.
(captured_mi_execute_command): Cast the closure to mi_parse
pointer, not to captured_mi_execute_command_args, and don't
set the action field thereof.
(mi_execute_command): Pass struct mi_parse, not
captured_mi_execute_command_args to captured_mi_execute_command.
(mi_execute_command): Remove (dead) code for suppressing
printing prompt.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Do no print
^running here.
(mi_on_resume): Print ^running if not previously output.
* mi/mi-main.c (running_result_record_printed): New.
(captured_mi_execute_command): Reset
running_result_record_printed. Use running_result_record_printed
to decide if we should skip ^done.
(mi_execute_async_cli_command): Don't print ^running here.
* mi/mi-main.h (current_token, running_result_record_printed):
Declare.
* varobj.c (varobj_update): Report changes as vector. Also
return not just a list of varobj, but a list of special structures
that tell what exactly has changed.
* varobj.h (enum varobj_update_error): Rename to
varobj_scope_status.
(struct varobj_update_result_t): New.
(varobj_update): Adjust prototype.
* mi/mi-cmd-var.c: Adjust for changes.
Adjust all prototypes using mi_cmd_args_ftype to use
mi_cmd_argv_ftype.
(struct mi_cmd): Remove the args_func field.
* mi/mi-cmds.c: Don't provide value for the args_func field.
* mi/mi-main.c (mi_execute_async_cli_command)
(mi_cmd_exec_run, mi_cmd_exec_next, mi_cmd_exec_next_instruction)
(mi_cmd_exec_step, mi_cmd_exec_step_instruction)
(mi_cmd_exec_finish, mi_cmd_exec_until, mi_cmd_exec_return)
(mi_cmd_exec_continue, mi_cmd_exec_interrupt)
(mi_cmd_target_download): Adjust.
(mi_cmd_target_select): Adjust. Pass 0 for from_tty parameter.
(mi_cmd_execute): Do not check for args_func.
(mi_execute_async_cli_command): Adjust.
* mi/mi-parse.c: Don't check for args_func.
(previous_async_command): Remove.
(mi_cmd_gdb_exit): Adjust.
(mi_cmd_exec_interrupt): Don't dance with previous_async_command.
(mi_cmd_target_select): Adjust.
(mi_cmd_execute): Don't set previous_async_command. Free token
here even in async mode.
(mi_execute_async_cli_command): Adjust.
(mi_exec_async_cli_cmd_continuation): Adjust. Do not free the
token.
(mi_load_progress): Adjust.
* breakpoint.c (until_break_command_continuation): Add
the 'error' parameter. Directly delete the breakoint as
opposed to running cleanups.
(until_break_command): Install continuation only
after starting the target. Don't use exec cleanups,
use ordinary cleanups. Discard cleanups is successfully
started the target in async mode.
(make_cleanup_delete_breakpoint): Remove.
* breakpoint.h (make_cleanup_delete_breakpoint): Remove
declaration.
* defs.h (do_exec_cleanups, make_exec_cleanup): Remove
declarations.
(struct continations): Add the 'error' parameter to the
continuation_hook field.
(add_continuation, do_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): Add the 'error' parameter.
* exceptions.c (throw_exception): Don't call do_exec_cleanups.
* inf-loop.c (inferior_event_handler): Instead of calling
discard_all_continuations, use do_all_continuations with 1 as
'error' parameter. Pass 0 as 'error' parameter in existing uses
of discard_all_continuations.
* infcmd.c (step_1): Do not use exec cleanup. For async case, discard
cleanups.
(step_once): Install continuation only after resuming the target.
(step_1_continuation): Disable longjmp breakpoint on error.
(finish_command_continuation): Add the error parameter. Delete
the finish breakpoint directly, do not use cleanups.
(finish_command): Do not use exec_cleanups. Always setup
continuation. For sync case, immediately run them.
(attach_command_continuation): Add the error parameter.
* infrun.c (fetch_inferior_event): Do not use exec cleanups to
remove step_resume_breakpoint -- adjust delete it directly.
* interps.c (interp_set): Adjust call to do_all_continations.
* mi/mi-interp.c (mi_interpreter_exec_continuation): Do not
do exec cleanups.
* mi/mi-main.c (mi_cmd_target_select): Do not do exec
cleanups.
(mi_cmd_execute): Do not use exec_cleanup.
(mi_execute_async_cli_command): Simplify the string concatenation
logic. Do no use exec cleanup.
(mi_exec_async_cli_cmd_continuation): New parameter error.
Free last_async_command.
* top.c (command_line_handler_continuation): New parameter error.
* utils.c (exec_cleanup_chain, make_exec_cleanup)
(do_exec_cleanups): Remove.
(add_continuation, do_all_continations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): New parameter error.
2008-04-09 Marc Khouzam <marc.khouzam@ericsson.com>
* mi/mi-cmd-var.c: Include "mi-getopt.h".
(mi_parse_format): New. Factored out from mi_cmd_var_set_format.
(mi_cmd_var_set_format): Use new mi_parse_format.
(mi_cmd_var_evaluate_expression): Support for -f option to specify
format.
* Makefile.in (mi-cmd-var.o): Update dependencies.
* varobj.h (varobj_get_formatted_value): Declare.
* varobj.c (my_value_of_variable): Added format parameter.
(cplus_value_of_variable): Likewise.
(java_value_of_variable): Likewise.
(c_value_of_variable): Likewise. Evaluate expression based
on format parameter.
(struct language_specific): Add format parameter to function member
*value_of_variable.
(varobj_get_formatted_value): New.
(varobj_get_value): Added format parameter to method call.
gdb/doc/ChangeLog
2008-04-09 Marc Khouzam <marc.khouzam@ericsson.com>
* gdb.texinfo (GDB/MI Variable Objects): Add anchor to
-var-set-format. Add -f option to -var-evaluate-expression.
gdb/testsuite/ChangeLog
2008-04-09 Marc Khouzam <marc.khouzam@ericsson.com>
* gdb.mi/mi2-var-display.exp: Added tests for the new -f
option of -var-evaluate-expression.
* gdb.mi/mi2-var-display.exp: Likewise.
(varobj_get_thread_id, check_scope): New functions.
(c_value_of_root): Use check_scope. Switch to the
proper thread if necessary.
* varobj.h (varobj_get_thread_id): New extern.
* mi/mi-cmd-var.c (print_varobj): Add thread-id field.
* gdbthread.h (print_thread_info): Declare.
* thread.c (print_thread_info): New, extracted
from info_threads_command and adjusted to
work for CLI and MI.
(info_threads_command): Use print_thread_info.
* Makefile.in: Update dependencies.
* mi/mi-cmds.c (mi_cmds): Specify a handler
for -thread-info.
* mi/mi-cmds.h (mi_cmd_thread_info): Declare.
* mi/mi-main.c (mi_cmd_thread_info): New.
(mi_cmd_list_features): Include 'thread-info'.
* Makefile.in (infcmd.o, inf-loop.o): Update dependencies.
* breakpoint.c (bpstat_do_actions): In async mode,
don't jump to top expecting stop_bpstat to be already
updated.
* event-loop.c (start_event_loop): Call async_enable_stdin
on exception.
* event-top.c (async_enable_stdin): Do nothing if sync_execution
is not set.
(command_handler): Do not setup continuation here.
(command_line_handler_continuation): Move to...
* top.c (command_line_handler_continuation): ... here.
(execute_command): In async mode, register continuation.
Don't check frame's language in running in async mode.
* exceptions.c (throw_exception): Don't do exec_error_cleanups.
* inf-loop.c (complete_execution): Inline into...
(inferior_event_handler): ... here. Clear target_executing before
doing any cleanups. Don't try to show prompt if the target was
resumed.
* infcmd.c (signal_command): Add support for async mode.
(finish_command): Only add continuation if the target was
successfully resumed.
* remote.c (init_async_opts): Register to_get_thread_local_address
handler.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess
with sync_execution.
* tui/tui-interp.c (tui_command_loop): Call async_enable_stdin
on exception.
* gdb.h (gdb_breakpoint): Add parameter pending.
* breakpoint.c (gdb_breakpoint): Add parameter pending.
* mi/mi-cmd-break.c (mi_break_insert): Change
comment to refer to manual. Add support for
the -f flag, for pending breakpoint.
(varobj_get_frozen): New.
(varobj_update): New parameter explicit.
* varobj.c (struct varobj): New fields frozen
and not_fetched.
(varobj_set_frozen, varobj_get_frozen): New.
(install_new_value): Don't fetch values for
frozen variable object, or children thereof. Allow
a frozen variable object to have non-fetched value.
(varobj_update): Allow updating child variables.
Don't traverse frozen children.
(new_variable): Initialize the frozen field.
(c_value_of_variable): Return NULL for frozen
variable without any value yet.
* mi/mi-cmd-var.c (varobj_update_one): New parameter
'explicit'.
(mi_cmd_var_create): Output the 'frozen' field,
as soon as testsuite is adjusted to expect that field.
(mi_cmd_var_set_frozen): New.
(mi_cmd_var_update): Pass the 'explicit' parameter to
varobj_update_one.
* mi/mi-cmds.c (mi_cmds): Register '-var-set-frozen'.
* mi/mi-cmds.h (mi_cmd_var_set_frozen): Declare.
* interps.c (clear_interpreter_hooks): Do not clear
deprecated_registers_changed_hook.
* regcache.c (registers_changed): Do not call it.
* top.c (deprecated_registers_changed_hook): Do not define it.
* mi/mi-interp.c (mi_command_loop): Do not clear it.
* tui/tui-hooks.c (tui_install_hooks): Do not install it.
(tui_remove_hooks): Do not remove it.
(tui_selected_frame_level_changed_hook): Check for negative level.
Use get_selected_frame.
(tui_registers_changed_hook): Deleted.
* varobj.h (enum varobj_update_error): New enum.
* varobj.c (struct varobj_root): Add is_valid member.
(varobj_get_type): Check for invalid varobj.
(varobj_get_attributes): Likewise.
(variable_editable):Likewise.
(varobj_update): Likewise. Use varobj_update_error.
(new_root_variable): Set root varobj as valid by default.
(varobj_invalidate): New function.
* symfile.c (clear_symtab_users): Use varobj_invalidate.
* mi/mi-cmd-var.c (varobj_update_one): Change return type to void.
Use varobj_update_error.
* gdb.mi/mi-var-block.exp, gdb.mi/mi2-var-block.exp
* gdb.mi/mi-var-child.exp, gdb.mi/mi2-var-child.exp
* gdb.mi/mi-var-child-f.exp, gdb.mi/mi-var-cmd.exp
* gdb.mi/mi2-var-cmd.exp, gdb.mi/mi-var-display.exp
* gdb.mi/mi2-var-display.exp, gdb.mi/gdb701.exp
* gdb.mi/gdb792.exp, gdb.mi/gdb792.exp
* lib/mi-support.exp:
Update tests to include value field in output of -var-create.
(rusage): Declare if HAVE_GETRUSAGE.
(current_command_ts, do_timings): New static variables.
(timestamp, print_diff_now, print_diff, timeval_diff):
New static timing functions.
(mi_cmd_enable_timings): New function for new MI command.
(captured_mi_execute_command, mi_execute_async_cli_command):
Call timing functions.
* mi/mi-cmds.c (mi_cmds): Add entry for new MI command
-enable-timings.
* mi/mi-cmds.h (mi_cmd_enable_timings): New extern.
* mi/mi-parse.h: (mi_timestamp): New structure.
(mi_parse): Add mi_timestamp* member.
other variables.
(gdbmi-send): Ensure any text properties can be removed.
(gdbmi-prompt1): Update to gdb-ui.el
(gud-gdbmi-marker-filter): Defer setting of gud-running.
Keep gdb-done-regexp for partial-output-buffer.
(gdb-stack-list-frames-handler): Add face to function names.
* dcache.c (dcache_write_line): Use target_write.
(dcache_read_line): Use target_read.
* mi/mi-main.c (mi_cmd_data_read_memory): Use target_read.
* symfile.c (struct load_section_data): Add new per-section
members.
(load_progress): New function.
(load_section_callback): Pass load_progress to the new
target_write_with_progress.
* target.c (current_xfer_partial, memory_xfer_partial): New.
(target_xfer_partial): New prototype.
(target_xfer_memory, target_xfer_partial_p, xfer_using_stratum)
(do_xfer_memory, target_xfer_memory_partial)
(target_read_memory_partial, target_write_memory_partial): Delete.
(trust_readonly): Move higher in the file.
(update_current_target): Use current_xer_partial.
(target_xfer_partial): Use memory_xfer_partial. Handle
TARGET_OBJECT_RAW_MEMORY specially.
(target_read_memory): Use target_read.
(target_write_memory): Use target_write.
(default_xfer_partial): Call to_xfer_partial directly.
(target_write_with_progress): New function, based on target_write.
(target_write): Call it.
* target.h (enum target_object): Add TARGET_OBJECT_RAW_MEMORY.
(target_write_with_progress): New prototype.
(do_xfer_memory, target_read_memory_partial)
(target_write_memory_partial): Delete prototypes.
Try to deal with continuation line.
(gdbmi, gdbmi-prompt1, gud-gdbmi-marker-filter): Update to new
variable names.
(gdb-break-list-regexp, gdb-stack-list-frames-regexp):
Future proof against new fields being added to MI output.
(gdbmi-prompt2, gdb-break-list-handler,gdb-get-source-file)
(gdbmi-frame-handler): Update to new variable name
gdb-get-buffer-create.
(gdbmi-frame-handler): Use hollow-right-triangle for all selected
frames which except the innermost (where execution has stopped).
(gdb-break-list-regexp): Match "what" field if present.
(gdb-stack-list-frames-regexp): Match "from" field if present.
(gdb-stack-list-frames-handler): Present output like "info
breakpoints" so regexps can be shared with gdb-ui
Daniel Jacobowitz <dan@codesourcery.com>
* mi/mi-cmds.h (mi_no_values, mi_simple_values, mi_all_values): New
declarations.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Use string
constants instead of literals for MI command options.
* mi/mi-cmd-var.c (mi_no_values, mi_simple_values, mi_all_values):
New variables.
(mi_parse_values_option, mi_print_value_p): New functions.
(mi_cmd_var_list_children): Use mi_parse_values_option and
mi_print_value_p.
(mi_cmd_var_update): Support a PRINT_VALUES option. Update calls
to varobj_update_one.
(varobj_update_one): Take a print_values argument. Call
mi_print_value_p.
* varobj.c (varobj_get_gdb_type): New function.
* varobj.h (varobj_get_gdb_type): New prototype.
* mi/mi-main.c (register_changed_p, get_register): Use
get_selected_frame.
(mi_execute_command): Call mi_out_rewind after an error.
testsuite/
* gdb.mi/mi-syn-frame.exp, gdb.mi/mi2-syn-frame.exp: Don't expect
excess MI output after an error.
* exceptions.h (exception_fprintf): Declare.
(exception_print): Drop pre_print parameter.
* mi/mi-main.c (mi_execute_command): Update exception_print call.
* cli/cli-interp.c (safe_execute_command): Update exception_print
call.
* remote.c (remote_open_1): Instead of passing an error prefix to
catch_exceptions, use catch_exceptions and exception_fprintf.
(remote_start_remote): Change return type to void.
* breakpoint.c (insert_bp_location): Instead of passing an error
prefix to catch_exceptions, use catch_exceptions and
exception_fprintf.
(insert_catchpoint): Change return type to void.
(break_command_1): Update exception_print call.
* exceptions.c (exception_fprintf): New function.
(print_exception): New function.
(exception_print): Use print_exception.
* mi/mi-main.c (mi_execute_command): Print the exception.
* cli/cli-interp.c (safe_execute_command): Print the exception.
* exceptions.h (exception_print): Declare.
* exceptions.c (struct catcher): Add field print_message.
(catcher_init): Add parameter print_message, store in the catcher
struct.
(print_and_throw): Only print the message when print_message.
(catch_exceptions_with_msg, catch_errors): Pass print_message=1 to
catcher_init.
(catch_exception): Pass print_message=0 to catcher_init.
* mi/mi-main.c (mi_execute_command): Use catch_exception,
eliminate call to error_last_message.
(captured_mi_execute_command): Change return type to void.
2004-09-12 Salvador E. Tropea <set@users.sf.net>
Andrew Cagney <cagney@gnu.org>
* mi/mi-main.c (mi_cmd_data_list_changed_registers)
(mi_cmd_data_list_register_values)
(mi_cmd_data_write_register_values): Include the PSEUDO_REGS in
the register number computation.