lines up under the data vector.
* dcache.c (dcache_read_line): New function.
(dcache_peek_byte): Use it.
(dcache_alloc): Return NULL if write of reclaimed cache line fails.
(dcache_peek_byte, dcache_poke_byte): Return failure if
dcache_alloc() returns a NULL data block pointer.
(dcache_xfer_memory): Don't force writeback unless we were writing.
* monitor.c (monitor_expect): Change places where immediate_quit
is set to 1 or 0 to increments and decrements respectively. This
allows such changes to nest properly.
* ocd.c (ocd_start_remote): Likewise.
* remote-adapt.c (expect): Likewise.
* remote-array.c (expect): Likewise.
* remote-eb.c (expect): Likewise.
* remote-e7000.c (e7000_start_remote): Likewise.
* remote-mips.c (mips_expect_timeout, mips_getstring): Likewise.
* remote-nrom.c (expect): Likewise.
* remote-os9k.c (expect): Likewise.
* remote-sds.c (sds_start_remote): Likewise.
* remote-st.c (expect): Likewise.
* remote-utils.c (sr_expect): Likewise.
* remote.c (remote_start_remote): Likewise.
* tracepoint.c (read_actions): Likewise.
* remote-mips.c (mips_getstring): Balance changes to immediate_quit.
* valops.c (value_cast): Indentation fix-up.
* acconfig.h (HAVE_PRGREGSET32_T, HAVE_PRFPREGSET32_T,
HAVE_STRUCT_LINK_MAP32): New configure macros.
* config.in: Ditto.
* configure.in: Test for the above new macros.
* breakpoint.c: Update copyright date.
* core-sol2.c: Include v9/sys/privregs.h directly to
work around a bug in Sun's Solaris 8 header files.
(fetch_core_registers): Use the above new configure macros to
handle cross-debugging of 32-bit core files on a 64-bit host.
* sol-thread.c (ps_pdmodel) New function.
(rw_common): For debugging of 32-bit apps on a 64-bit host,
truncate addresses to 32 bits.
* solib.c (solib_extract_address): Functionize. Make 32/64 aware.
(LM_ADDR, LM_NEXT, LM_NAME): Ditto.
(IGNORE_FIRST_LINK_MAP): Ditto.
(first_link_map_member): Make 32/64 aware.
(open_symbol_file_object): Ditto.
(current_sos): Ditto.
* i386-linux-nat.c (i386_linux_skip_solib_resolver,
skip_hurd_resolver, find_minsym_and_objfile): Move these
solib functions into i386-linux-tdep.c for cross debugging.
* i386-linux-tdep.c: Receive the above functions.
argument if it is missing an extension.
* corelow.c: Define O_BINARY if it isn't defined.
(core_open): Open core file in binary mode.
* config/i386/tm-cygwin.h (child_clear_solibs): Rename from child_clear_solib.
* config/i386/cygwin.mh: Add dependency from corelow.o.
* win32-nat.c (register_loaded_dll): New function. Add dll to the list of
currently loaded dlls.
(handle_load_dll): Use register_loaded_dll.
(child_solib_add): Distinguish between active process and core targets.
(solib_symbols_add): Load symbols from loaded dll.
(core_dll_symbols_add): New function. Load symbols from dll referenced in
core.
(core_section_load_dll_symbols): New function.
(dll_code_sections_add): New function.
(map_single_dll_code_section): New function.
(fetch_elf_core_registers): New function.
(_initialize_core_win32): New function.
* symtab.c (search_symbols): Fix off by one error in index for
initializing variables ourtype, ourtype2, ourtype3, and ourtype4.
(symtab_symbol_info): fix similar off by one error.
Fri Aug 25 12:03:15 2000 David Taylor <taylor@texas.cygnus.com>
* gdbarch.sh (TARGET_ADDR_BIT): New macro for the number
of bits in gdb's representation of a target address.
* gdbarch.c, gdbarch.h: Regenerated.
* gdbtypes.c (build_gdbtypes): Use TARGET_ADDR_BIT instead of
TARGET_PTR_BIT when initializing builtin_type_CORE_ADDR.
* printcmd.c (print_address_numeric): Use TARGET_ADDR_BIT instead
of TARGET_PTR_BIT, because we're printing an address, not a pointer.
* i386-linux-nat.c: Various doc fixes. Include "i387-nat.h".
(GETFPXREGS_SUPPLIES): Renamed from GETXFPREGS_SUPPLIES.
(have_ptrace_getfpxregs): Renamed from have_ptrace_getxfpregs.
(convert_to_gregset): Removed. Moved logic to ...
(fill_gregset): ... here. Simplified function.
(fetch_regs): Use perror_with_name for error reporting.
(store_regs): Add `regno' parameter. Use perror_with_name for
error reporting. Call fill_gregset instead of convert_to_gregset.
(FPREG_ADDR): Remove.
(supply_fpregset): Implement by calling i387_supply_fsave.
(convert_to_fpregset): Remove.
(fill_fpregset): Implement by calling i387_fill_fsave.
(fetch_fpregs): Use perror_with_name fro error reporting.
(store_fpregs) Add `regno' parameter. Use perror_with_name fro
error reporting. Call fill_fpregset instead of
convert_to_fpregset.
(supply_xfpregset, convert_to_xfpregset): Removed.
(supply_fpxregset, fill_fpxregset): New functions.
(fetch_fpxregs): Renamed from fetch_xfpregs. Use perror_with_name
for error reporting. Call supply_fpxregset instead of
supply_xfpregset.
(store_xfpregs): Removed.
(store_fpxregs): New function.
(fetch_inferior_registers): Adjust for xfp -> fpx change. Tweak
message in call to internal_error.
(store_inferior_registers): Adjust for xfp ->fpx change. Pass
REGNO to store_regs, store_fpregs and store_fpxregs.
(fetch_core_registers): Adjust for xfp -> fpx change.
* acconfig.h (HAVE_PTRACE_GETFPXREGS): Renamed from
HAVE_PTRACE_GETXFPREGS.
* config.in: Regenerated.
* configure.in: Replace check for PTRACE_GETXFPREGS with check for
PTRACE_GETFPXREGS. Remove comment about Cygnus SSE extensions.
* configure: Regenerated.
* config/i386/linux.mh (NATDEPFILES): Add i387-nat.o.
* config/i386/tm-linux.h: Base definition of HAVE_SSE_REGS on
HAVE_PTRACE_GETFPXREGS instead of HAVE_PTRACE_GETXFPREGS.
* c-lang.c: Set case sensitivity on for c_language_defn,
cplus_language_defn, and asm_language_defn.
* ch-lang.c: Set case sensitivity on for chill_language_defn.
* f-lang.c: Set case sensivitity off for f_language_defn.
* jv-lang.c: Set case sensitivity on for java_language_defn.
* language.h: Add enum case_mode, case_sensitivity.
* language.c: Define case_mode, case_sensitivity. Set case
sensitivity on for unknown_language_defn, auto_language_defn,
and local_language_defn.
(show_case_command,set_case_command,set_case_str): New static func.
(set_type_range_case): New static func, replaces set_type_range ().
(set_language_command,set_type_command,set_range_command,set_language):
Call set_type_range_case ().
(language_info): Print case sensitivity setting.
(_initialize_language): Add set/show commands for 'case-sensitive'.
Set default case mode 'auto'. Set default language 'auto'.
* m2-lang.c: Set case sensitivity on for m2_language_defn.
* p-lang.c: Set case sensitivity on for pascal_language_defn.
* scm-lang.c: Set case sensitivity off for scm_language_defn.
* symtab.c (lookup_symbol): Downcase symbol name if case sensivitity
is off.
invalidate it rather than creating another.
* ocd.c (ocd_open): Likewise.
* remote-nindy.c (nindy_open): Likewise.
* remote-sds.c (sds_open): Likewise.
* remote-utils.c (gr_open): Likewise.
* remote.c (remote_open_1, remote_cisco_open): Likewise.
* dcache.c (dcache_alloc): Changed to take address of line as an
argument, and to invalidate cache line before returning.
(dcache_peek_byte): Updated.
(dcache_poke_byte): Updated.
-------------------------------------------------------------------
* i386-linux-nat.c: Various doc fixes. Include "i387-nat.h".
(GETFPXREGS_SUPPLIES): Renamed from GETXFPREGS_SUPPLIES.
(have_ptrace_getfpxregs): Renamed from have_ptrace_getxfpregs.
(convert_to_gregset): Removed. Moved logic to ...
(fill_gregset): ... here. Simplified function.
(fetch_regs): Use perror_with_name for error reporting.
(store_regs): Add `regno' parameter. Use perror_with_name for
error reporting. Call fill_gregset instead of convert_to_gregset.
(FPREG_ADDR): Remove.
(supply_fpregset): Implement by calling i387_supply_fsave.
(convert_to_fpregset): Remove.
(fill_fpregset): Implement by calling i387_fill_fsave.
(fetch_fpregs): Use perror_with_name fro error reporting.
(store_fpregs) Add `regno' parameter. Use perror_with_name fro
error reporting. Call fill_fpregset instead of
convert_to_fpregset.
(supply_xfpregset, convert_to_xfpregset): Removed.
(supply_fpxregset, fill_fpxregset): New functions.
(fetch_fpxregs): Renamed from fetch_xfpregs. Use perror_with_name
for error reporting. Call supply_fpxregset instead of
supply_xfpregset.
(store_xfpregs): Removed.
(store_fpxregs): New function.
(fetch_inferior_registers): Adjust for xfp -> fpx change. Tweak
message in call to internal_error.
(store_inferior_registers): Adjust for xfp ->fpx change. Pass
REGNO to store_regs, store_fpregs and store_fpxregs.
(fetch_core_registers): Adjust for xfp -> fpx change.
* acconfig.h (HAVE_PTRACE_GETFPXREGS): Renamed from
HAVE_PTRACE_GETXFPREGS.
* config.in: Regenerated.
* configure.in: Replace check for PTRACE_GETXFPREGS with check for
PTRACE_GETFPXREGS. Remove comment about Cygnus SSE extensions.
* configure: Regenerated.
* config/i386/linux.mh (NATDEPFILES): Add i387-nat.o.
* config/i386/tm-linux.h: Base definition of HAVE_SSE_REGS on
HAVE_PTRACE_GETFPXREGS instead of HAVE_PTRACE_GETXFPREGS.
(i387_supply_fxsave, i387_fill_fxsave): New prototypes.
* i387-nat.c (i387_supply_fsave): Declare `val' as `unsigned int'.
(fxsave_offset): New variable.
(FXSAVE_ADDR): New macro.
(i387_supply_fxsave, i387_fill_fxsave, i387_tag): New functions.
* objfiles.h (SECT_OFF_BSS): Don't detect invalid sect_index_bss
here, let the users of the macro do it.
* symtab.h (ANOFFSET): Detect here if the section index is not
initialized.
* xcoffread.c (find_targ_sec): Don't treat .bss as special,
because some objfiles may not have that section at all.
* coffread.c (cs_to_section): Ditto.
* elfread.c (elf_symtab_read): Detect an uninitialized index
value.
(elfstab_offset_sections): The macro ANOFFSET cannot be used as an
lvalue anymore.
* remote.c (get_offsets, remote_cisco_objfile_relocate): Don't use
ANOFFSET as an lvalue.
* objfiles.c (objfile_relocate, objfile_relocate): Don't use
ANOFFSET as an lvalue.
* symfile.c (default_symfile_offsets): Don't use ANOFFSET as an
lvalue.
* objfiles.h (SECT_OFF_BSS): Don't detect invalid sect_index_bss
here, let the users of the macro do it.
* symtab.h (ANOFFSET): Detect here if the section index is not
initialized.
* xcoffread.c (find_targ_sec): Don't treat .bss as special,
because some objfiles may not have that section at all.
* coffread.c (cs_to_section): Ditto.
* elfread.c (elf_symtab_read): Detect an uninitialized index
value.
(elfstab_offset_sections): The macro ANOFFSET cannot be used as an
lvalue anymore.
* remote.c (get_offsets, remote_cisco_objfile_relocate): Don't use
ANOFFSET as an lvalue.
* objfiles.c (objfile_relocate, objfile_relocate): Don't use
ANOFFSET as an lvalue.
* symfile.c (default_symfile_offsets): Don't use ANOFFSET as an
lvalue.
(safe_symbol_file_add_cleanup): Reset stdout to saved stdout, not stderr.
(dll_symbol_command): Pass OBJF_USERLOADED to safe_symbol_file_add.
(get_child_debug_event): Always reset last_sig. Always reset inferior pid
appropriately.
(do_initial_child_stuff): New function. Called when attaching or starting a
new inferior process.
(child_attach): Use do_initial_child_stuff.
(child_create_inferior): Ditto.
* config/i386/cygwin.mh (NAT_FILE): Set to modern location.
* config/i386/tm-cygwin.h: Define ATTACH_NO_WAIT.
it to GDB's current directory.
(go32_create_inferior, init_go32_ops): Initialize child_cwd[] to
an empty string, to signal an uninitialized value.
From Robert Hoehne <robert.hoehne@gmx.net>.
function signatures so that they match catch_errors and
make_cleanup callbacks.
* tracepoint.c (encode_actions): Fix arguments passed to
stringify_collection_list.
* sh-tdep.c (sh_push_arguments): Make header match prototype.
* remote-e7000.c (e7000_start_remote): Use void *, not char * as
parameter to avoid compiler warning.
(fetch_regs_from_dump): Call get_hex() with the correct number of
parameters.
* gdb.base/recurse.exp: Run tests for all targets.
* gdb.base/so-impl-ld.exp: Added wildcard to handle the
gnu-oldld case on ARM.
* gdb.base/watchpoint.exp (test_stepping): Clear xfail
for ARM targets.
* sh-tdep.c (sh_gdbarch_init): For sh4 initialize
register_convert_to_raw, register_convert_to_virtual,
register_convertible.
(sh_sh4_register_convertible): New function.
(sh_sh4_register_convert_to_virtual): New function.
(sh_sh4_register_convert_to_raw): New function.
Include floatformat.h.
* configure.tgt: Recognize the 68hc11.
* m68hc11-tdep.c: New file for 68hc11 target.
* config/m68hc11/m68hc11.mt: New file for 68hc11 port.
* configure.tgt: When 68hc11, set gdb_multi_arch.
* sh-tdep.c (sh_sh4_register_name, sh_sh4_register_byte,
sh_sh4_register_raw_size, sh_sh4_register_virtual_type,
sh_fetch_pseudo_register, sh_store_pseudo_register,
sh_do_pseudo_register, sh_gdbarch_init): Fix names for pseudoregs,
they should be numbered as drx fvy where x and y are multiples of
2 and 4 respectively.
* config/sh/tm-sh.h: Fix names of pseudo regs.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add sh4 specific
pseudo registers.
(DO_REGISTERS_INFO): Define.
* sh-tdep.c (sh_sh4_register_name): New function.
(sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update
signature.
(sh_show_regs_command): New function. Actual function called by
the 'regs' command.
(sh_register_byte): Rename to...
(sh_default_register_byte): ...New function.
(sh_sh4_register_byte): New function.
(sh_register_raw_size): Rename to...
(sh_default_register_raw_size): ...New function.
(sh_sh4_register_raw_size): New function.
(sh_sh4_register_virtual_type): New function.
(sh_sh4_build_float_register_type): New function.
(sh_fetch_pseudo_register, sh_store_pseudo_register): New
functions.
(fv_reg_base_num, dr_reg_base_num): New functions.
(do_fv_register_info, do_dr_register_info, sh_do_pseudo_register,
sh_do_fp_register, sh_do_register, sh_print_register,
sh_do_registers_info): New functions.
(sh_gdbarch_init): Initialize sh4 pseudo registers to -1. Update
architecture specific parts.
(_initialize_sh_tdep): Use sh_show_regs_command for 'regs' command.
read_comp_unit_head() and ``struct compu_unit_head'' parameter.
Include support for signed address case.
Fixes problem of global address size / sign being out-of-sync with
with current section.
* config/i386/tm-i386.h: treat PC and FP as unsigned.
(SAVED_PC_AFTER_CALL): Use read_memory_unsigned_integer.
(FRAME_SAVED_PC): Ditto.
(FRAME_CHAIN): Ditto.
* rs6000-tdep.c (DEFAULT_LR_SAVE): Move to config/*/tm-*.h.
(rs6000_gdbarch_init): Use generic_pc_in_call_dummy instead of
rs6000_pc_in_call_dummy.
* config/rs6000/tm-rs6000.h (DEFAULT_LR_SAVE): Move here from
rs6000-tdep.c.
* config/powerpc/tm-ppc-eabi.h: Remove various definitions
handled by multi-arched rs6000-tdep.c.
* regcache.c (registers_changed, registers_fetched): Use
ARCH_NUM_REGS directly, eliminating an unnecessary variable.
This change adds pseudo-register capability to GDB.
Pseudo-registers are handled like registers, but they
don't come from or live on the target. They may be
aliases for an existing register, or they may be computed.
* defs.h (NUM_PSEUDO_REGISTERS): Define default of zero.
(ARCH_FETCH_PSEUDO_REGISTERS): Define default of no-op.
(ARCH_STORE_PSEUDO_REGISTERS): Define default of no-op.
# regcache.c (registers_changed): Mark pseudo-registers
invalid, as well as real registers.
(registers_fetched): Do not mark pseudo-registers as fetched
at the same time as other (real) registers.
(read_register_bytes): Fetch pseudo-registers (if any) from
the target architecture module instead of from the target.
(read_register_gen): Ditto.
(read_register): Ditto.
(write_register_bytes): Store pseudo-registers (if any) to
the target architecture module instead of to the target.
(write_register_gen): Ditto.
(write_register): Ditto.
(build_regcache): Allocate enough register_valid space for
pseudo-registers as well as normal (real) ones.
all old style K&R function definitions to ISO-C.
(struct gdbarch_tdep): Add mips_abi_string.
(mips_gdbarch_init): Initialize.
(mips_dump_tdep): Print mips_abi_string and other values.
(mips_push_arguments): Add more detailed tracing.
16 byte boundary. Align allocated argument space using
MIPS_STACK_ARGSIZE. Reserve space on stack for the struct return
and floating-point registers. Use fp_register_arg_p to determine
if float_argreg should be aligned.
* config/sh/tm-sh.h (STORE_RETURN_VALUE): Redefine as
sh_store_return_value().
* sh-tdep.c (sh_store_return_value): New function. Store the
value returned by a function into the appropriate register.
2000-07-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* sh-tdep.c (sh_skip_prologue): Before looking at the actual
instructions, try to see if the symbol table can be of help, by
calling after_prologue(). If this doesn't work, call
skip_prologue_hard_way().
(skip_prologue_hard_way): Renamed from sh_skip_prologue. Add some
more instruction pattern matching for pushing of arguments, and
manipulation of r14.
(after_prologue): New function. Use symbol table info to determine
the end of the prologue, if possible.
equivalence.
(rank_one_type): Use strcmp instead of == to compare type names.
Don't swap parm with arg when checking TYPE_CODE_REF types.
* valops.c (find_overload_match): Fix indentation. Compare
parameter rankings to 0..9, 10..99, and 100+ instead of 0, 10,
and 100.
spelling.
(test_enums): New procedure. Move enum tests from end of script
to here. Set breakpoint on function name instead of line number.
* gdb.c++/misc.cc (ClassWithEnum): Move past Foo definitions.
(enums2): New marker function.
(enums1): New function.
(main): Call enums1(). Move enum tests to enums1().
Committed by Elena Zannoni <ezannoni@cygnus.com>
* sh-tdep.c (sh_skip_prologue): Change prologue matching for modern
compilers.
(sh_frame_find_saved_regs): Ditto.
(sh_find_callers_reg): Stop if pc is zero.
(nindy_xfer_inferior_memory): Use dcache_xfer_memory() instead of
breaking transfer into chunks and using nindy_fetch_word() and
nindy_store_word().
* remote-bug.c (bug_xfer_memory): Use dcache_xfer_memory() instead
of breaking transfer into chunks and using gr_fetch_word() and
gr_store_word().
* remote.c (remote_fetch_word, remote_store_word): Removed.
* remote-utils.h (gr_fetch_word, gr_store_word): Removed.
* remote-utils.c (gr_fetch_word, gr_store_word): Removed.
* dcache.h (dcache_fetch, dcache_poke, dcache_poke_block): Removed.
* dcache.c (dcache_fetch, dcache_poke): Removed.
support. Incorporate most of tm-rs6000.h.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
(read_memory_addr): Define.
(pop_frame): Rename to rs6000_pop_frame.
(rs6000_pop_frame, rs6000_fix_call_dummy, rs6000_push_arguments,
rs6000_frame_saved_pc, rs6000_frame_chain): Remove non-generic
dummy frame handling.
(branch_dest, rs6000_pop_frame, rs6000_skip_trampoline_code,
rs6000_frame_saved_pc, frame_get_saved_regs,
frame_initial_stack_address, rs6000_frame_chain,
rs6000_convert_from_func_ptr_addr): Call read_memory_addr instead
of read_memory_integer.
(branch_dest, rs6000_pop_frame, rs6000_push_arguments,
rs6000_skip_trampoline_code, rs6000_frame_saved_pc,
frame_get_saved_regs, frame_initial_stack_address,
rs6000_frame_chain): Replace 4 with TDEP->wordsize.
(skip_prologue): Recognize some 64-bit stack adjustments.
(push_dummy_frame, pop_dummy_frame, set_processor,
show_processor): Delete.
(frame_get_saved_regs): Manipulate saved register addresses using
CORE_ADDR instead of int.
(rs6000_create_inferior): New function.
(register_names_*[]): Change to struct reg registers_*[].
(variants[]): Assimilate into multi-arch approach.
(register_names_*[], variants[]): Refer to pre-PowerPC
architectures as POWER instead of RS6000.
* rs6000-nat.c: Ubiquitous changes for 64-bit support.
(vmap_secs, xcoff_relocate_symtab): Cast addresses
to unsigned long to avoid sign-extension errors.
(set_host_arch): New function.
(xcoff_relocate_symtab): Try disabling usleep(36000) workaround.
(rs6000_core_fns): Use new bfd_target_xcoff_flavour.
(_initialize_core_rs6000): Initialize rs6000_set_host_arch_hook.
* symfile.c (find_sym_fns): Remove special xcoff kludge.
* xcoffread.c (secnum_to_bfd_section): Initialize args.objfile.
(process_linenos): Query line struct size from coff
backend instead of using compile-time constant.
(enter_line_range): Likewise.
(read_xcoff_symtab): Pass "XCOFF64" instead of "XCOFF" to
record_debugformat() if appropriate.
(process_xcoff_symbol): Access symbol addresses using
SYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE.
(read_symbol_lineno): Retrieve XCOFF64 symbol names from strtbl.
(scan_xcoff_symtab): Likewise. Query syment struct size from
coff backend instead of using compile-time constant.
(xcoff_sym_fns): Set flavour to bfd_target_xcoff_flavour.
* Makefile.in (INTERNAL_LDFLAGS): Add $(MH_LDFLAGS) to list of flags
that this Makefile variable get set to. (From Kevin Buettner.)
* config/powerpc/aix.mh (MH_LDFLAGS): Add linker flags so that
the TOC doesn't overflow. (From Kevin Buettner.)
* config/powerpc/tm-ppc-aix.h: Move config decisions to
multi-arched rs6000-tdep.c.
* config/rs6000/tm-rs6000.h: Likewise.
(GDB_MULTI_ARCH): Define.
(skip_trampoline_code): Rename to rs6000_skip_trampoline_code.
(is_magic_function_pointer): Replace with
rs6000_convert_from_func_ptr_addr.
(TARGET_CREATE_INFERIOR_HOOK): Define.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
* config/rs6000/nm-rs6000.h (CHILD_XFER_MEMORY): Define.
* dwarf2read.c (dump_die): Use the proper printf format for
printing DW_UNSND values; they're longs now.
* dwarf2read.c (dump_die): We can read DW_FORM_data8 now, on
at least some platforms, so print it out too.
2000-06-14 James E. Wilson <wilson@bletchleypark.cygnus.com>
* dwarf2read.c (struct attribute): Change unsnd and snd field types
to long.
(read_8_bytes): Change return type to long.
(read_unsigned_leb128): Change return type to long. Change type of
local result to long. Cast argument of left shift to long.
(read_signed_leb128): Likewise.
* gdb.base/annota1.exp (run until main breakpoint): Loosen up
the regular expression: accept an (almost) arbitrary sequence of
"frames-invalid" and "breakpoints-invalid" messages both before
and after the "starting" message.
(FIX_CALL_DUMMY): Redefined to call i386_fix_call_dummy.
(i386_fix_call_dummy): Add prototype.
* i386-tdep.c (i386_fix_call_dummy): New function based on the
code from the old FIX_CALL_DUMMY macro.
here.
(safe_symbol_file_add_stub): Redirect gdb_stdout as well as stderr.
(safe_symbol_file_add_cleanup): Restore gdb_stdout.
(info_dll_command): Use the pager for displaying DLLs since there are often
quite a few.
* config/i386/tm-embed.h: New file. Specific for embedded targets
like i386-elf, i386-coff and i386-aout.
* config/i386/embed.mt (): Specify tm-embed.h instead of the System V
header file.
* values.c (value_primitive_field): Copy VALUE_REGNO as well.
With typed registers we may have the location information in this field,
in addition to VALUE_ADDRESS (which was already being copied).
arch-utils.{h,c}. The ``set architecutre'' and ``set endian''
commands (part of the move) were implemented to use add_set_enum_cmd()
so that ``set architecture <tab>'' works.
David Anderson
Kevin Buettner
Michael Snyder
J.T. Conklin
Stephane Carrez
Mark Kettenis
Elena Zannoni
Christopher Faylor
David Taylor
Pierre Muller
Andrew Cagney
Eli Zaretskii
Jimmy Guo
Kazu Hirata
Tom Tromey
Scott Bambrough
Jim Blandy
Anthony Green
Nicholas Duffek
Daniel Berlin
Nick Clifton
Jeff Law
Fernando Nasser
Klee Dienes