Following the implementation of exec-file-mismatch based on build-id,
an attach to a process that runs a modified exec-file was triggering
the exec-file-mismatch handling, giving a warning such as:
warning: Mismatch between current exec-file /bd/home/philippe/gdb/git/build_termours/gdb/testsuite/outputs/gdb.base/attach/attach
and automatically determined exec-file /bd/home/philippe/gdb/git/build_termours/gdb/testsuite/outputs/gdb.base/attach/attach
exec-file-mismatch handling is currently "ask"
as the build-ids differ when an exec-file is recompiled.
This patch ensures that the exec-file-mismatch check is done with an up to date
build-id. With this, exec-file-mismatch check will only trigger when the
PID file really differs from the (build-id refreshed) current exec-file.
Note that the additional check does not (yet) reload the symbols if
the exec-file is changed: this reload will happen later if needed.
gdb/ChangeLog
2020-06-21 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* exec.c (validate_exec_file): Ensure the build-id is up to
date by calling reopen_exec_file (that checks file timestamp
to decide to re-read the file).
gdb/testsuite/ChangeLog
2020-06-21 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/attach.exp: Test priority of 'exec-file' changed
over 'exec-file-mismatch'.
* gdb.base/attach.c: Mark should_exit volatile.
* gdb.base/attach2.c: Likewise. Add a comment explaining
why the sleep cannot be big.
* gdb.base/attach3.c: New file.
ERROR should really be reserved for errors in the testsuite framework,
not just normal errors from the tools under test. Removing use of
perror has been suggested before but without action, over concerns
that some test failures might be missed. This patch removes uses of
perror in ld_assemble, ld_compile and ld_nm, and updates numerous
places that ignored the result of these functions by inappropriately
returning an "unresolved" test status. Net result over my large set
of targets look good, in some cases improving the diagnostics, eg:
i386-msdos -ERROR: tmpdir/script: nm failed
i386-msdos -ERROR: tmpdir/script: nm failed
i386-msdos -ERROR: tmpdir/script: nm failed
i386-msdos -ERROR: tmpdir/script: nm failed
i386-msdos +FAIL: script
i386-msdos +FAIL: MRI script
i386-msdos +FAIL: MEMORY
i386-msdos +FAIL: MEMORY with symbols
* testsuite/lib/ld-lib.exp (default_ld_compile): Don't perror on
a compiler error.
(default_ld_assemble): Similarly for an assembler error.
(default_ld_nm): Similarly for an nm error.
(run_ld_link_tests): Report ld_assemble errors as a fail.
(check_as_cfi): Remove now unnecessary perror substitution.
* testsuite/ld-elf/exclude.exp: Report ld_nm error return as test
fails rather then unresolved.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-scripts/alignof.exp: Likewise.
* testsuite/ld-scripts/defined.exp: Likewise.
* testsuite/ld-scripts/script.exp: Likewise.
* testsuite/ld-scripts/sizeof.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-scripts/extern.exp: Likewise. Return on ld_link
failure.
* testsuite/ld-elfweak/elfweak.exp: Report compiler errors as
test unresolved.
* testsuite/ld-fastcall/fastcall.exp: Report assember errors as
test fails.
* testsuite/ld-i386/i386.exp (iamcu_tests): Likewise.
* testsuite/ld-ia64/line.exp: Likewise.
* testsuite/ld-mep/mep.exp: Likewise.
* testsuite/ld-mips-elf/mips-elf-flags.exp: Likewise.
* testsuite/ld-nios2/nios2.exp: Likewise.
* testsuite/ld-scripts/alignof.exp: Likewise.
* testsuite/ld-x86-64/line.exp: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-scripts/log2.exp: Formatting.
* testsuite/ld-tic6x/tic6x.exp: Report ld_link errors as a test fail.
The aim of this change is to remove a whole lot of "assembly failed"
errors for ecoff targets.
* testsuite/ld-alpha/alpha.exp: Exclude *ecoff targets.
* testsuite/ld-elf/binutils.exp: Likewise.
* testsuite/ld-elf/tls.exp: Likewise.
* testsuite/ld-elf/tls_common.exp: Likewise.
* testsuite/ld-scripts/phdrs2.exp: Likewise.
All current SH gas targets use BFD. sh-coff was incorrectly reported
as unsupported.
gas/
* configure.tgt: Set bfd_gas for all SH targets.
ld/
* testsuite/ld-sh/sh.exp: Don't run relax tests for non-ELF.
Fail when ld_assemble fails. Use elseif to reduce indentation.
2020-06-19 Sandra Loosemore <sandra@codesourcery.com>
Hafiz Abid Qadeer <abidh@codesourcery.com>
* gdb.xml/tdesc-regs.exp (load_description): Correct pathname of
file sent to remote host.
(top level): Allow int32_t as type of 32-bit register.
The file lib/future.exp contains an override of dejagnu's
default_target_compile.
The override is activated if dejagnu's default_target_compile is missing
support for one or more languages.
However, if the override is activated, it's active for all languages.
This unnecessarily extends the scope of potential problems in the override to
languages that don't need the override.
Fix this by limiting the scope of the override.
Also add a note stating for which languages the override is active, as a
reminder that support for those languages needs to be ported to dejagnu. With
my system dejagnu 1.6.1, as well as with current dejagnu trunk, that gives us:
...
NOTE: Dejagnu's default_target_compile is missing support for Go, using \
local override
NOTE: Dejagnu's default_target_compile is missing support for Rust, using \
local override
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-06-19 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_note): New proc.
* lib/future.exp (gdb_default_target_compile_1): Factor out of ...
(gdb_default_target_compile): ... here. Only call
gdb_default_target_compile_1 if use_gdb_compile(<lang>) is set.
(use_gdb_compile): Change to array.
(toplevel): Update sets of use_gdb_compile to specify language.
Warn about default_target_compile override. Store dejagnu's version
of default_target_compile in dejagnu_default_target_compile.
I have been looking at a Fedora bug report[1] from a user who was
receiving warning messages from the BFD library about incompatible
plugins. It turns out that they had both 32-bit and 64-bit versions
of the same plugin installed, and the BFD library was attempting to
load all of them.
After thinking about it for a while, it seemed to me that the simplest
solution was to not warn about incompatible plugins whilst attempting
to create a list of viable plugins.
[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1836618
* plugin.c (try_load_plugin): Suppress the error message about
being unable to open a plugin if creating a list of viable
plugins.
Some tests failed just due to st_other info, eg. [NOPV], being
emitted by readelf or objdump. Fix that. Also since alpha doesn't
support ifunc, don't run the ifunc tests for alpha.
* testsuite/ld-elf/dynamic-1.rd: Accept st_other notations.
* testsuite/ld-elf/rdynamic-1.rd: Likewise.
* testsuite/ld-elf/pr9676.rd: Likewise.
* testsuite/ld-elf/pr9679.rd: Likewise.
* testsuite/ld-elfvers/vers30.dsym: Likewise.
* testsuite/ld-elfvers/vers31.dsym: Likewise.
* testsuite/ld-plugin/pr22983.3.d: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Exclude alpha.
ld silently accepts -z relro and -z norelro for targets that lack the
necessary GNU_RELRO support. This patch makes those targets emit a
warning instead, and adds testsuite infrastructure to detect when
relro is unsupported.
binutils/
* testsuite/config/default.exp (ld_elf_shared_opt): Don't set.
* testsuite/lib/binutils-common.exp (check_relro_support): New proc.
(run_dump_test): Use check_relro_support to decide whether to pass
extra ld option "-z norelro".
ld/
* emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Omit
-z relro and -z norelro when target support for GNU_RELRO is lacking.
(gld${EMULATION_NAME}_before_parse): Ignore RELRO default too.
* emultempl/aarch64elf.em (gld${EMULATION_NAME}_before_parse): Ignore
RELRO default when target support for GNU_RELRO is lacking.
* emultempl/armelf.em (gld${EMULATION_NAME}_before_parse): Likewise.
* emultempl/linux.em (gld${EMULATION_NAME}_before_parse): Likewise.
* emultempl/scoreelf.em (gld${EMULATION_NAME}_before_parse): Likewise.
* testsuite/config/default.exp (ld_elf_shared_opt): Don't set.
* testsuite/ld-elf/pr16322.d: xfail when no relro support.
* testsuite/ld-elf/pr22393-1a.d: Likewise.
* testsuite/ld-elf/pr22393-1b.d: Likewise.
* testsuite/ld-elf/shared.exp (pr20995-2.so, pr20995-2): Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Use check_relro_support
to decide whether to pass extra ld option "-z norelro".
In PR 25412, Simon noticed that after the multi-target series, the
tid-reuse.exp testcase manages to create a duplicate thread in the
thread list. Or rather, two threads with the same PTID.
add_thread_silent has code in place to detect the case of a new thread
reusing some older thread's ptid, but it doesn't work correctly
anymore when the old thread is NOT the current thread and it has a
refcount higher than 0. Either condition prevents a thread from being
deleted, but the refcount case wasn't being considered. I think the
reason that case wasn't considered is that that code predates
thread_info refcounting. Back when it was originally written,
delete_thread always deleted the thread.
That add_thread_silent code in question has some now-unnecessary
warts, BTW. For instance, this:
/* Make switch_to_thread not read from the thread. */
new_thr->state = THREAD_EXITED;
... used to be required because switch_to_thread would update
'stop_pc' otherwise. I.e., it would read registers from an exited
thread otherwise. switch_to_thread no longer reads the stop_pc, since:
commit f2ffa92bbc
Author: Pedro Alves <palves@redhat.com>
AuthorDate: Thu Jun 28 20:18:24 2018 +0100
gdb: Eliminate the 'stop_pc' global
Also, if the ptid of the now-gone current thread is reused, we
currently return from add_thread_silent with the current thread
pointing at the _new_ thread. Either pointing at the old thread, or
at no thread selected would be reasonable. But pointing at an
unrelated thread (the new thread that happens to reuse the ptid) is
just broken. Seems like I was the one who wrote it like that but I
have no clue why, FWIW.
Currently, an exited thread kept in the thread list still holds its
original ptid. The idea was that we need the ptid to be able to
temporarily switch to another thread and then switch back to the
original thread, because thread switching is really inferior_ptid
switching. Switching back to the original thread requires a ptid
lookup.
Now, in order to avoid exited threads with the same ptid as a live
thread in the same thread list, one thing I considered (and tried) was
to change an exited thread's ptid to minus_one_ptid. However, with
that, there's a case that we won't handle well, which is if we end up
with more than one exited thread in the list, since then all exited
threads will all have the same ptid. Since inferior_thread() relies
on inferior_ptid, may well return the wrong thread.
My next attempt to address this, was to switch an exited thread's ptid
to a globally unique "exited" ptid, which is a ptid with pid == -1 and
tid == 'the thread's global GDB thread number'. Note that GDB assumes
that the GDB global thread number is monotonically increasing and
doesn't wrap around. (We should probably make GDB thread numbers
64-bit to prevent that happening in practice; they're currently signed
32-bit.) This attempt went a long way, but still ran into a number of
issues. It was a major hack too, obviously.
My next attempt is the one that I'm proposing, which is to bite the
bullet and break the connection between inferior_ptid and
inferior_thread(), aka the current thread. I.e., make the current
thread be a global thread_info pointer that is written to directly by
switch_to_thread, etc., and making inferior_thread() return that
pointer, instead of having inferior_thread() lookup up the
inferior_ptid thread, by ptid_t. You can look at this as a
continuation of the effort of using more thread_info pointers instead
of ptids when possible.
By making the current thread a global thread_info pointer, we can make
switch_to_thread simply write to the global thread pointer, which
makes scoped_restore_current_thread able to restore back to an exited
thread without relying on unrelyable ptid look ups. I.e., this makes
it not a real problem to have more than one thread with the same ptid
in the thread list. There will always be only one live thread with a
given ptid, so code that looks up a live thread by ptid will always be
able to find the right one.
This change required auditing the whole codebase for places where we
were writing to inferior_ptid directly to change the current thread,
and change them to use switch_to_thread instead or one of its
siblings, because otherwise inferior_thread() would return a thread
unrelated to the changed-to inferior_ptid. That was all (hopefully)
done in previous patches.
After this, inferior_ptid is mainly used by target backend code. It
is also relied on by a number of target methods. E.g., the
target_resume interface and the memory reading routines -- we still
need it there because we need to be able to access memory off of
processes for which we don't have a corresponding inferior/thread
object, like when handling forks. Maybe we could pass down a context
explicitly to target_read_memory, etc.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
PR gdb/25412
* gdbthread.h (delete_thread, delete_thread_silent)
(find_thread_ptid): Update comments.
* thread.c (current_thread_): New global.
(is_current_thread): Move higher, and reimplement.
(inferior_thread): Reimplement.
(set_thread_exited): Use bool. Add assertions.
(add_thread_silent): Simplify thread-reuse handling by always
calling delete_thread.
(delete_thread): Remove intro comment.
(find_thread_ptid): Skip exited threads.
(switch_to_thread_no_regs): Write to current_thread_.
(switch_to_no_thread): Check CURRENT_THREAD_ instead of
INFERIOR_PTID. Clear current_thread_.
There are other writes in the file, but they seem more harmless. This
one is changing the current thread permanently.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* aix-thread.c (pd_update): Use switch_to_thread.
Writing to inferior_ptid in
windows_nat_target::get_windows_debug_event is just incorrect and not
necessary. We'll report the event to GDB's core, which then takes
care of switching inferior_ptid / current thread.
Related (see windows_nat_target::get_windows_debug_event), there's
also a "current_windows_thread" global that is just begging to get out
of sync with core GDB's current thread. This patch removes it.
gdbserver already does not have an equivalent global in win32-low.cc.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* nat/windows-nat.c (current_windows_thread): Remove.
* nat/windows-nat.h (current_windows_thread): Remove.
* windows-nat.c (windows_nat_target::stopped_by_sw_breakpoint):
Adjust.
(display_selectors): Adjust to fetch the current
windows_thread_info based on inferior_ptid.
(fake_create_process): No longer write to current_windows_thread.
(windows_nat_target::get_windows_debug_event):
Don't set inferior_ptid or current_windows_thread.
(windows_nat_target::wait): Adjust to not rely on
current_windows_thread.
(do_initial_windows_stuff): Now a method of windows_nat_target.
Switch to the last_ptid thread.
(windows_nat_target::attach): Adjust.
(windows_nat_target::detach): Use switch_to_no_thread instead of
writing to inferior_ptid directly.
(windows_nat_target::create_inferior): Adjust.
The inferior_ptid hack in do_initial_win32_stuff, added back in 2008:
https://sourceware.org/ml/gdb-patches/2008-10/msg00012.html
with:
commit 9f9d052e60
Author: Pierre Muller <muller@sourceware.org>
AuthorDate: Thu Oct 2 14:20:07 2008 +0000
* win32-nat.c (do_initial_win32_stuff): Set inferior_ptid.
is no longer needed. Back then, current_inferior looked like this:
struct inferior*
current_inferior (void)
{
struct inferior *inf = find_inferior_pid (ptid_get_pid (inferior_ptid));
gdb_assert (inf);
return inf;
}
Nowadays, current_inferior() just returns the global current_inferior_
pointer, which didn't exist back then.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* windows-nat.c (do_initial_windows_stuff): No longer set inferior_ptid.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* go32-nat.c (go32_nat_target::create_inferior): Switch to thread
after creating it, instead of writing to inferior_ptid. Don't
write to inferior_ptid.
This is no longer necessary. All targets that call fork_inferior now
also call switch_to_thread as soon as they add the main thread.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* fork-child.c (postfork_hook): Don't write to inferior_ptid.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* bsd-kvm.c (bsd_kvm_target_open): Switch to thread after adding
it, instead of writing to inferior_ptid.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* bsd-kvm.c (bsd_kvm_target::close): Use switch_to_no_thread
instead of writing to inferior_ptid directly.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* corelow.c (core_target::close): Use switch_to_no_thread instead
of writing to inferior_ptid directly.
(add_to_thread_list, core_target_open): Use switch_to_thread
instead of writing to inferior_ptid directly.
Untested.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_nat_target::decode_message): Don't write to
inferior_ptid.
(darwin_nat_target::stop_inferior, darwin_nat_target::kill): Avoid
inferior_ptid.
(darwin_attach_pid): Use switch_to_no_thread instead of writing to
inferior_ptid directly.
(darwin_nat_target::init_thread_list): Switch to thread, instead
of writing to inferior_ptid.
(darwin_nat_target::attach): Don't write to inferior_ptid.
(darwin_nat_target::get_ada_task_ptid): Avoid inferior_ptid.
Untested.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* gnu-nat.c (gnu_nat_target::create_inferior): Switch to the added
thread.
(gnu_nat_target::attach): Don't write to inferior_ptid directly.
Instead use switch_to_thread.
(gnu_nat_target::detach): Use switch_to_no_thread
instead of writing to inferior_ptid directly. Used passed-in
inferior instead of looking up the inferior by pid.
generic_mourn_inferior already takes care of switching to no thread.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* go32-nat.c (go32_nat_target::create_inferior): Don't write to
inferior_ptid.
A best effort patch, which fixes some bit rot and removes some
inferior_ptid references -- this port clearly hasn't been built in a
long while.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* nto-procfs.c (nto_procfs_target::update_thread_list): Avoid
inferior_ptid.
(nto_procfs_target::attach): Avoid inferior_ptid. Switch to
thread.
(nto_procfs_target::detach): Avoid referencing
inferior_ptid. Use switch_to_no_thread instead of writing to
inferior_ptid directly.
(nto_procfs_target::mourn_inferior): Use switch_to_no_thread
instead of writing to inferior_ptid directly.
(nto_procfs_target::create_inferior): Avoid inferior_ptid. Switch
to thread.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* remote-sim.c (gdbsim_target::create_inferior): Switch to thread
after creating it, instead of writing to inferior_ptid.
(gdbsim_target_open): Use switch_to_no_thread instead of writing
to inferior_ptid directly.
(gdbsim_target::wait): Don't write to inferior_ptid.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::remote_notice_new_inferior): Use
switch_to_thread instead of writing to inferior_ptid directly.
(remote_target::add_current_inferior_and_thread): Use
switch_to_no_thread instead of writing to inferior_ptid directly.
(extended_remote_target::attach): Use switch_to_inferior_no_thread
and switch_to_thread instead of using set_current_inferior or
writing to inferior_ptid directly.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* tracectf.c (ctf_target_open): Switch to added thread instead of
writing to inferior_ptid directly.
(ctf_target::close): Use switch_to_no_thread instead of writing to
inferior_ptid directly.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* tracefile-tfile.c (tfile_target_open): Don't write to
inferior_ptid directly, instead switch to added thread.
(tfile_target::close): Use switch_to_no_thread instead of writing
to inferior_ptid directly.
The inferior_ptid write in procfs_do_thread_registers should be
unnecessary because the target_fetch_registers method should (and
does) extract the ptid from the regcache.
Not tested.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* procfs.c (procfs_target::attach): Don't write to inferior_ptid.
(procfs_target::detach): Use switch_to_no_thread
instead of writing to inferior_ptid directly.
(do_attach): Change return type to void. Switch to the added
thread.
(procfs_target::create_inferior): Switch to the added thread.
(procfs_do_thread_registers): Don't write to inferior_ptid.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* infrun.c (generic_mourn_inferior): Use switch_to_thread instead
of writing to inferior_ptid.
(scoped_restore_exited_inferior): Delete.
(handle_vfork_child_exec_or_exit): Simplify using
scoped_restore_current_pspace_and_thread. Use switch_to_thread
instead of writing to inferior_ptid.
(THREAD_STOPPED_BY): Delete.
(thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
(thread_stopped_by_hw_breakpoint): Delete.
(save_waitstatus): Use
scoped_restore_current_thread+switch_to_thread, and call
target_stopped_by_watchpoint instead of
thread_stopped_by_watchpoint, target_stopped_by_sw_breakpoint
instead of thread_stopped_by_sw_breakpoint, and
target_stopped_by_hw_breakpoint instead of
thread_stopped_by_hw_breakpoint.
(handle_inferior_event)
<TARGET_WAITKIND_EXITED/TARGET_WAITKIND_SIGNALLED>: Don't write to
inferior_ptid directly, nor
set_current_inferior/set_current_program_space. Use
switch_to_thread / switch_to_inferior_no_thread instead.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* target.c (generic_mourn_inferior): Use switch_to_no_thread
instead of writing to inferior_ptid.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* inf-ptrace.c (inf_ptrace_target::create_inferior): Switch to the
added thread.
(inf_ptrace_target::attach): Don't write to inferior_ptid. Switch
to the added thread.
(inf_ptrace_target::detach_success): Use switch_to_no_thread
instead of writing to inferior_ptid.
Use switch_to_thread instead of writing to inferior_ptid. This
requires a couple of improvements to the mocking environment. One is
to mock a pspace too, and assigning it to the inferior. In turn, this
requires heap-allocating the address space, so that the regular
program_space dtor destroys the address space correctly.
(Note that new the mock program_space is allocated on the stack, and
thus depends on the previous patch that eliminated
delete_program_space.)
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* gdbarch-selftests.c: Include "progspace-and-thread.h".
(register_to_value_test): Mock a program_space too. Heap-allocate
the address space. Don't write to inferior_ptid. Use
switch_to_thread instead.
An early (and since discarded) version of this series tried to make
exited threads have distinct PTID between each other, and that change
exposed a problem in linux-tdep.c... This was exposed by the
gdb.threads/gcore-stale-thread.exp testcase, which is exactly about
calling gcore with an exited thread selected:
(gdb) [Thread 0x7ffff7fb6740 (LWP 31523) exited]
PASS: gdb.threads/gcore-stale-thread.exp: continue to breakpoint: break-here
gcore /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.threads/gcore-stale-thread/gcore-stale-thread.core
/home/pedro/gdb/binutils-gdb/build/../src/gdb/inferior.c:66: internal-error: void set_current_inferior(inferior*): Assertion `inf != NULL' failed.
A problem internal to GDB has been detected,
That was find_inferior_ptid being called on the "exited" ptid, which
on that previous (and discarded attempt) had pid==-1. The problem is
that linux-tdep.c, where it looks for the signalled thread, isn't
considering exited threads. Also, while at it, that code isn't
considering multi-target either, since it is using
iterate_over_threads which iterates over all threads of all targets.
Fixed by switching to range-for iteration instead.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* linux-tdep.c (find_signalled_thread(thread_info *,void *)):
Delete.
(find_signalled_thread()): New, factored out from
linux_make_corefile_notes and adjusted to handle exited threads.
(linux_make_corefile_notes): Adjust to use the new
find_signalled_thread.
gdb/ChangeLog:
2020-06-18 Pedro Alves <palves@redhat.com>
* linux-tdep.c (btrace_fetch): Save/restore current thread instead
of saving/restoring inferior_ptid.
If a baseboard file wants to override a proc foo, but also use the original
proc, it'll have to do something like:
...
rename foo save_foo
proc foo { } {
...
set res [save_foo]
...
return res
}
...
This adds a new proc named save_foo, which introduces the risk of clashing with
an existing proc.
There's a pattern in the gdb testsuite procs, that facilitates this override:
...
proc default_foo { } {
...
}
proc foo { } {
return [default_foo]
}
...
such that in a baseboard file we don't need the rename:
...
proc foo { } {
...
set res [default_foo]
...
return res
}
...
The exception to the pattern though is gdb_init, which has a default_gdb_init
counterpart, but contains much more code than just the call to
default_gdb_init.
Fix this by moving all but the call to default_gdb_init to default_gdb_init.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-06-18 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_init): Move all but call to default_gdb_init to ...
(default_gdb_init): ... here.
I found some unnecessary declarations (and one unused macro) in the
TUI. This patch removes them.
gdb/ChangeLog
2020-06-17 Tom Tromey <tom@tromey.com>
* tui/tui-win.h (tui_scroll_forward, tui_scroll_backward)
(tui_scroll_left, tui_scroll_right, struct tui_win_info): Don't
declare.
* tui/tui-data.h (MIN_CMD_WIN_HEIGHT): Remove.
2020-06-17 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.python/py-format-string.exp: Move test for python support
earlier, out of function body.
This patch fixes an internal error that is triggered when loading the
same binary twice with the index-cache on:
$ ./gdb -q -nx --data-directory=data-directory
(gdb) set index-cache on
(gdb) shell mktemp -d
/tmp/tmp.BLgouVoPq4
(gdb) set index-cache directory /tmp/tmp.BLgouVoPq4
(gdb) file a.out
Reading symbols from a.out...
(gdb) file a.out
Load new symbol table from "a.out"? (y or n) y
Reading symbols from a.out...
/home/smarchi/src/binutils-gdb/gdb/dwarf2/read.c:2540: internal-error: void create_cus_from_index(dwarf2_per_bfd*, const gdb_byte*, offset_type, const gdb_byte*, offset_type): Assertion `per_bfd->all_comp_units.empty ()' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This is what happens:
1. We load the binary the first time, partial symtabs are created,
per_bfd->all_comp_units is filled from those.
2. Because index-cache is on, we also generate an index in the cache.
3. We load the binary a second time, in dwarf2_initialize_objfile we
check: was an index already loaded for this BFD? No, so we try to
read the index and fill the per-bfd using it. We do find an index,
it's in the cache.
4. The function create_cus_from_index asserts (rightfully) that
per_cu->all_comp_units is empty, and the assertion fails.
This assertion verifies that we are not reading an index for a BFD for
which we have already built partial symtabs or read another index.
The index-cache gives a situation that isn't currently accounted for: a
BFD for which we have built the partial symtabs the first time, but has
an index the second time.
This patch addresses it by checking for the presence of partial symtabs
in dwarf2_initialize_objfile. If there are, we don't try reading the
index.
gdb/ChangeLog:
* dwarf2/read.c (dwarf2_initialize_objfile): Check for presence
of partial symtabs.
gdb/testsuite/ChangeLog:
* gdb.base/index-cache-load-twice.c: New.
* gdb.base/index-cache-load-twice.exp: New.
Change-Id: Ie05474c44823fcdff852b73170dd28dfd66cb6a2
