The ARMv8.2 architecture includes the RAS extension which adds an
instruction, ESB, and a number of coprocessor registers. This patch adds
the instruction to binutils, making it available when -march=armv8.2-a
is selected. It also adds tests for the instruction and for the
coprocessor registers.
gas/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_ext_v8_2): New.
(insns): Add "esb".
* testsuite/gas/arm/armv8_2-a.d: New.
* testsuite/gas/arm/armv8_2-a.s: New.
opcodes/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* arm-dis.c (arm_opcodes): Add "esb".
(thumb_opcodes): Likewise.
Change-Id: I67f3d70789db78d1c66a56c4994675f99ac15e34
bfd * elf32-arm.c (elf32_arm_fix_exidx_coverage): Insert cantunwind when
address in first unwind entry does not match start of section.
tests * ld-arm/arm-elf.exp: New test.
* ld-arm/unwind-mix.d: New file.
* ld-arm/unwind-mix1.s: New file.
* ld-arm/unwind-mix2.s: New file.
This patch fixes the following GDB build error in C++ mode.
gdb/nat/linux-ptrace.c: In function 'int linux_child_function(void*)':
gdb/nat/linux-ptrace.c:323:65: error: invalid conversion from 'void*' to 'gdb_byte* {aka unsigned char*}' [-fpermissive]
linux_fork_to_function (child_stack, linux_grandchild_function);
^
gdb:
2016-01-12 Yao Qi <yao.qi@linaro.org>
* nat/linux-ptrace.c (linux_child_function): Cast child_stack
to gdb_byte * and pass to linux_fork_to_function.
We need to use -Wno-missing-prototypes for now as much of the code
sticks externs in local files and not in common headers.
2016-01-11 Mike Frysinger <vapier@gentoo.org>
* acinclude.m4: Include new ../warning.m4 file.
* configure: Regenerated.
* configure.ac: Replace all warning logic with AM_GDB_WARNINGS.
I see the following compile error with an old bfin-uclinux gcc to
build GDBserver,
cc1: warnings being treated as errors
gdb/gdbserver/../nat/linux-ptrace.c: In function 'linux_fork_to_function':
gdb/gdbserver/../nat/linux-ptrace.c:283: error: passing argument 1 of 'clone' from incompatible pointer type
in glibc, clone's prototype is like this, and in uClibc, it is the same,
int clone(int (*fn)(void *), void *child_stack,
int flags, void *arg, ...
/* pid_t *ptid, struct user_desc *tls, pid_t *ctid */ );
so this patch changes function signature from 'void (*function) (gdb_byte *)'
to 'int (*function) (void *)'.
Note that I find Pedro advised to change argument type from 'void *'
to 'gdb_byte *' during the patch review
https://sourceware.org/ml/gdb-patches/2013-08/msg00611.html however,
I think fix compile error can justify the change back to 'void *'.
gdb:
2016-01-12 Yao Qi <yao.qi@linaro.org>
* nat/linux-ptrace.c (linux_fork_to_function): Change type
of argument 'function'.
(linux_grandchild_function): Change return type to 'int'.
Change child_stack's type to 'void *'.
(linux_child_function): Likewise.
The GNU Coding Standards say:
"Please do not include any trademark acknowledgements in GNU
software packages or documentation."
gdb/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/gdbserver/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
gdb/doc/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
Remove use of the registered trademark symbol throughout.
This patch changes the document that interrupt (ctrl-c) is not ignored
when the program is stopped.
When the interrupt was supported in remote target, people thought interrupt
is meaningless when the program is stopped. See
https://www.sourceware.org/ml/gdb/2005-11/msg00349.htmlhttps://www.sourceware.org/ml/gdb-patches/2005-11/msg00307.html
recently we find it is hard to preserve this feature "ignore interrupt
while program is stopped" when we fix some other bugs. See
https://sourceware.org/ml/gdb-patches/2016-01/msg00039.html
so we think we can go to the simpler approach "not ignoring ctrl-c when
program is stopped". As a result, we tweak the documentation here.
gdb/doc:
2016-01-12 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Interrupts): Update the document on handling
interrupt when program is stopped.
This exposes the issued fixed by 2f99e8fc9cb8:
https://sourceware.org/ml/gdb-patches/2015-12/msg00423.html
to native debugging as well.
gdb/testsuite/ChangeLog:
2016-01-12 Pedro Alves <palves@redhat.com>
* gdb.base/random-signal.exp (do_test): New procedure, with body
of testcase moved in.
(top level) Call it twice, once with "run" and once with "attach".
gold/
PR gold/19353
* aarch64.cc (Target_aarch64::relocate_tls): Don't insist that
we have a TLS segment for GD-to-IE optimization.
* i386.cc (Target_i386::tls_gd_to_ie): Remove tls_segment parameter.
Adjust all calls.
(Target_i386::tls_desc_gd_to_ie): Likewise.
(Target_i386::relocate_tls): Don't insist that we have a TLS segment
for TLSDESC GD-to-IE optimizations.
* x86_64.cc (Target_x86_64::tls_gd_to_ie): Remove tls_segment parameter.
Adjust all calls.
(Target_x86_64::tls_desc_gd_to_ie): Likewise.
(Target_x86_64::relocate_tls): Don't insist that we have a TLS segment
for TLSDESC GD-to-IE optimizations.
The mips bfd will sign extend 32-bit addresses into 64-bit values,
so if the entry happens to be 0x80000000 or higher, it is turned to
0xffffffff80000000 which points to memory that doesn't exist.
This wasn't an issue until commit 26f8bf63bf
as all addresses were automatically truncated there in the translate
function to 32-bits. When we cleaned up that code, the full 64-bits
were checked leading to many test failures for mips-sde-elf targets
and such.
For MIPS-64, the r_info field in the relocation format is
replaced by several individual fields, including r_sym and
r_type. To enable support for this format, I've refactored
target-independent code to remove almost all uses of the r_info
field. (I've left alone a couple of routines used only for
incremental linking, which I can update if/when the MIPS target
adds support for incremental linking.)
For routines that are already templated on a Classify_reloc class
(namely, gc_process_relocs, relocate_section, and
relocate_relocs), I've extended the Classify_reloc interface to
include sh_type (which no longer needs to be a separate template
parameter) as well as get_r_sym() and get_r_type() methods for
extracting the r_sym and r_type fields. For
scan_relocatable_relocs, I've extended the
Default_scan_relocatable_relocs class by converting it to a class
template with Classify_reloc as a template parameter. For the
remaining routines that need to access r_sym, I've added a
virtual Target::get_r_sym() method with an override for the MIPS
target.
In elfcpp, I've added Mips64_rel, etc., accessor classes and
corresponding internal data structures. The MIPS target uses
these new classes within its own Mips_classify_reloc class.
The Mips64_ accessor classes also expose the r_ssym, r_type2,
and r_type3 fields from the relocation.
These changes should be functionally the same for all but the
MIPS target.
elfcpp/
* elfcpp.h (Mips64_rel, Mips64_rel_write): New classes.
(Mips64_rela, Mips64_rela_write): New classes.
* elfcpp_internal.h (Mips64_rel_data, Mips64_rela_data): New structs.
gold/
* gc.h (get_embedded_addend_size): Remove sh_type parameter.
(gc_process_relocs): Remove sh_type template parameter.
Use Classify_reloc to access r_sym, r_type, and r_addend fields.
* object.h (Sized_relobj_file::split_stack_adjust): Add target
parameter.
(Sized_relobj_file::split_stack_adjust_reltype): Likewise.
* reloc-types.h (Reloc_types::copy_reloc_addend): (SHT_REL and SHT_RELA
specializations) Remove.
* reloc.cc (Emit_relocs_strategy): Rename and move to target-reloc.h.
(Sized_relobj_file::emit_relocs_scan): Call Target::emit_relocs_scan().
(Sized_relobj_file::emit_relocs_scan_reltype): Remove.
(Sized_relobj_file::split_stack_adjust): Add target parameter.
Adjust all callers.
(Sized_relobj_file::split_stack_adjust_reltype): Likewise. Call
Target::get_r_sym() to get r_sym field from relocations.
(Track_relocs::next_symndx): Call Target::get_r_sym().
* target-reloc.h (scan_relocs): Remove sh_type template parameter;
add Classify_reloc template parameter. Use for accessing r_sym and
r_type.
(relocate_section): Likewise.
(Default_classify_reloc): New class (renamed and moved from reloc.cc).
(Default_scan_relocatable_relocs): Remove sh_type template parameter.
(Default_scan_relocatable_relocs::Reltype): New typedef.
(Default_scan_relocatable_relocs::reloc_size): New const.
(Default_scan_relocatable_relocs::sh_type): New const.
(Default_scan_relocatable_relocs::get_r_sym): New method.
(Default_scan_relocatable_relocs::get_r_type): New method.
(Default_emit_relocs_strategy): New class.
(scan_relocatable_relocs): Replace sh_type template parameter with
Scan_relocatable_relocs class. Use it to access r_sym and r_type
fields.
(relocate_relocs): Replace sh_type template parameter with
Classify_reloc class. Use it to access r_sym and r_type fields.
* target.h (Target::is_call_to_non_split): Replace r_type parameter
with pointer to relocation. Adjust all callers.
(Target::do_is_call_to_non_split): Likewise.
(Target::emit_relocs_scan): New virtual method.
(Sized_target::get_r_sym): New virtual method.
* target.cc (Target::do_is_call_to_non_split): Replace r_type parameter
with pointer to relocation.
* aarch64.cc (Target_aarch64::emit_relocs_scan): New method.
(Target_aarch64::Relocatable_size_for_reloc): Remove.
(Target_aarch64::gc_process_relocs): Use Default_classify_reloc.
(Target_aarch64::scan_relocs): Likewise.
(Target_aarch64::relocate_section): Likewise.
(Target_aarch64::Relocatable_size_for_reloc::get_size_for_reloc):
Remove.
(Target_aarch64::scan_relocatable_relocs): Use Default_classify_reloc.
(Target_aarch64::relocate_relocs): Use Default_classify_reloc.
* arm.cc (Target_arm::Arm_scan_relocatable_relocs): Remove sh_type
template parameter.
(Target_arm::emit_relocs_scan): New method.
(Target_arm::Relocatable_size_for_reloc): Replace with...
(Target_arm::Classify_reloc): ...this.
(Target_arm::gc_process_relocs): Use Classify_reloc.
(Target_arm::scan_relocs): Likewise.
(Target_arm::relocate_section): Likewise.
(Target_arm::scan_relocatable_relocs): Likewise.
(Target_arm::relocate_relocs): Likewise.
* i386.cc (Target_i386::emit_relocs_scan): New method.
(Target_i386::Relocatable_size_for_reloc): Replace with...
(Target_i386::Classify_reloc): ...this.
(Target_i386::gc_process_relocs): Use Classify_reloc.
(Target_i386::scan_relocs): Likewise.
(Target_i386::relocate_section): Likewise.
(Target_i386::scan_relocatable_relocs): Likewise.
(Target_i386::relocate_relocs): Likewise.
* mips.cc (Mips_scan_relocatable_relocs): Remove sh_type template
parameter.
(Mips_reloc_types): New class template.
(Mips_classify_reloc): New class template.
(Target_mips::Reltype): New typedef.
(Target_mips::Relatype): New typedef.
(Target_mips::emit_relocs_scan): New method.
(Target_mips::get_r_sym): New method.
(Target_mips::Relocatable_size_for_reloc): Replace with
Mips_classify_reloc.
(Target_mips::copy_reloc): Use Mips_classify_reloc.
(Target_mips::gc_process_relocs): Likewise.
(Target_mips::scan_relocs): Likewise.
(Target_mips::relocate_section): Likewise.
(Target_mips::scan_relocatable_relocs): Likewise.
(Target_mips::relocate_relocs): Likewise.
(mips_get_size_for_reloc): New function, factored out from
Relocatable_size_for_reloc::get_size_for_reloc.
(Target_mips::Scan::local): Use Mips_classify_reloc.
(Target_mips::Scan::global): Likewise.
(Target_mips::Relocate::relocate): Likewise.
* powerpc.cc (Target_powerpc::emit_relocs_scan): New method.
(Target_powerpc::Relocatable_size_for_reloc): Remove.
(Target_powerpc::gc_process_relocs): Use Default_classify_reloc.
(Target_powerpc::scan_relocs): Likewise.
(Target_powerpc::relocate_section): Likewise.
(Powerpc_scan_relocatable_reloc): Convert to class template.
(Powerpc_scan_relocatable_reloc::Reltype): New typedef.
(Powerpc_scan_relocatable_reloc::reloc_size): New const.
(Powerpc_scan_relocatable_reloc::sh_type): New const.
(Powerpc_scan_relocatable_reloc::get_r_sym): New method.
(Powerpc_scan_relocatable_reloc::get_r_type): New method.
(Target_powerpc::scan_relocatable_relocs): Use
Powerpc_scan_relocatable_reloc.
(Target_powerpc::relocate_relocs): Use Default_classify_reloc.
* s390.cc (Target_s390::emit_relocs_scan): New method.
(Target_s390::Relocatable_size_for_reloc): Remove.
(Target_s390::gc_process_relocs): Use Default_classify_reloc.
(Target_s390::scan_relocs): Likewise.
(Target_s390::relocate_section): Likewise.
(Target_s390::Relocatable_size_for_reloc::get_size_for_reloc):
Remove.
(Target_s390::scan_relocatable_relocs): Use Default_classify_reloc.
(Target_s390::relocate_relocs): Use Default_classify_reloc.
* sparc.cc (Target_sparc::emit_relocs_scan): New method.
(Target_sparc::Relocatable_size_for_reloc): Remove.
(Target_sparc::gc_process_relocs): Use Default_classify_reloc.
(Target_sparc::scan_relocs): Likewise.
(Target_sparc::relocate_section): Likewise.
(Target_sparc::Relocatable_size_for_reloc::get_size_for_reloc):
Remove.
(Target_sparc::scan_relocatable_relocs): Use Default_classify_reloc.
(Target_sparc::relocate_relocs): Use Default_classify_reloc.
* tilegx.cc (Target_tilegx::emit_relocs_scan): New method.
(Target_tilegx::Relocatable_size_for_reloc): Remove.
(Target_tilegx::gc_process_relocs): Use Default_classify_reloc.
(Target_tilegx::scan_relocs): Likewise.
(Target_tilegx::relocate_section): Likewise.
(Target_tilegx::Relocatable_size_for_reloc::get_size_for_reloc):
Remove.
(Target_tilegx::scan_relocatable_relocs): Use Default_classify_reloc.
(Target_tilegx::relocate_relocs): Use Default_classify_reloc.
* x86_64.cc (Target_x86_64::emit_relocs_scan): New method.
(Target_x86_64::Relocatable_size_for_reloc): Remove.
(Target_x86_64::gc_process_relocs): Use Default_classify_reloc.
(Target_x86_64::scan_relocs): Likewise.
(Target_x86_64::relocate_section): Likewise.
(Target_x86_64::Relocatable_size_for_reloc::get_size_for_reloc):
Remove.
(Target_x86_64::scan_relocatable_relocs): Use Default_classify_reloc.
(Target_x86_64::relocate_relocs): Use Default_classify_reloc.
* testsuite/testfile.cc (Target_test::emit_relocs_scan): New method.
[This reapplies a change that was accidentally reverted with c0ecb95f3d.]
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
3ca22649a6 is the first bad commit
commit 3ca22649a6
Author: Simon Marchi <simon.marchi@polymtl.ca>
Date: Mon Dec 21 12:51:54 2015 -0500
Remove HP-UX references fom testsuite
@@ -1013,13 +1013,6 @@ proc localvars_in_indirect_call { } {
#
gdb_test_multiple "finish" "finish from indirectly called function" {
- -re "\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*First.*$gdb_prompt $" {
- #On hppa2.0w-hp-hpux11.00, gdb finishes at one line earlier than
- #hppa1.1-hp-hpux11.00. Therefore, an extra "step" is necessary
- #to continue the test.
- send_gdb "step\n"
- exp_continue
- }
-re ".*\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*Second.*$gdb_prompt $" {
pass "finish from indirectly called function"
}
->
finish^M
Run till exit from #0 call0a (c=97 'a', s=1, i=2, l=3) at ./gdb.base/funcargs.c:82^M
0x0804a189 in main () at ./gdb.base/funcargs.c:583^M
583 (*pointer_to_call0a) (c, s, i, l); /* First step into call0a. */^M
-(gdb) step^M
-584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */^M
-(gdb) PASS: gdb.base/funcargs.exp: finish from indirectly called function
+(gdb) FAIL: gdb.base/funcargs.exp: finish from indirectly called function
step^M
-call0a (c=97 'a', s=1, i=2, l=3) at ./gdb.base/funcargs.c:82^M
-82 c = 'a';^M
-(gdb) PASS: gdb.base/funcargs.exp: stepping into indirectly called function
+584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */^M
+(gdb) FAIL: gdb.base/funcargs.exp: stepping into indirectly called function
At least on x86_64 with testsuite in -m32 (expecting native i386 would be the
same).
Pedro Alves:
The difference is that with newer GCC there's an extra instruction
after the call which is still assigned to line 583:
$ diff -up /tmp/4.8.3 /tmp/6.0.0 -U 1000
--- /tmp/4.8.3 2016-01-11 12:37:39.611089156 +0000
+++ /tmp/6.0.0 2016-01-11 13:21:00.021127976 +0000
@@ -1,27 +1,30 @@
583 (*pointer_to_call0a) (c, s, i, l); /* First step into call0a. */
mov 0x804d060,%ebx
mov 0x804d050,%ecx
movzwl 0x804d040,%eax
movswl %ax,%edx
movzbl 0x804d030,%eax
movsbl %al,%eax
- mov %ebx,0xc(%esp)
- mov %ecx,0x8(%esp)
- mov %edx,0x4(%esp)
- mov %eax,(%esp)
- mov 0x7c(%esp),%eax
+ push %ebx
+ push %ecx
+ push %edx
+ push %eax
+ mov -0x1c(%ebp),%eax
call *%eax
+ add $0x10,%esp
584 (*pointer_to_call0a) (c, s, i, l); /* Second step into call0a. */
mov 0x804d060,%ebx
mov 0x804d050,%ecx
movzwl 0x804d040,%eax
movswl %ax,%edx
movzbl 0x804d030,%eax
movsbl %al,%eax
- mov %ebx,0xc(%esp)
- mov %ecx,0x8(%esp)
- mov %edx,0x4(%esp)
- mov %eax,(%esp)
- mov 0x7c(%esp),%eax
+ push %ebx
+ push %ecx
+ push %edx
+ push %eax
+ mov -0x1c(%ebp),%eax
call *%eax
+ add $0x10,%esp
+
I don't know why -m32 changed to push/add instead of mov while 64-bit hasn't.
This is most likely needed on non-x86 ports as well.
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/funcargs.exp (finish from indirectly called function):
Reintroduce the case for 'First'.
fe33faff35 is the first bad commit
commit fe33faff35
Author: Simon Marchi <simon.marchi@ericsson.com>
Date: Tue Dec 22 10:52:31 2015 -0500
Remove HP-UX reference in foll-vfork.exp
FAIL: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exit: vfork parent follow, finish after tcatch vfork: continue to vfork
FAIL: gdb.base/foll-vfork.exp: exit: vfork child follow, finish after tcatch vfork: continue to vfork
It happens for plain gdb.base/foll-vfork.exp runtest on Fedora 23 x86_64.
-Temporary catchpoint 2 (vforked process 24562), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
+Temporary catchpoint 2 (vforked process 25345), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
52 pushq %rdi^M
Current language: auto^M
The current source language is "auto; currently asm".^M
-(gdb) PASS: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
+(gdb) FAIL: gdb.base/foll-vfork.exp: exec: vfork parent follow, finish after tcatch vfork: continue to vfork
-Temporary catchpoint 2 (vforked process 24629), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
+Temporary catchpoint 2 (vforked process 25411), vfork () at ../sysdeps/unix/sysv/linux/x86_64/vfork.S:52^M
52 pushq %rdi^M
Current language: auto^M
The current source language is "auto; currently asm".^M
-(gdb) PASS: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
+(gdb) FAIL: gdb.base/foll-vfork.exp: exec: vfork child follow, finish after tcatch vfork: continue to vfork
So I have reverted it and just simplified the comment.
The third case is not necessary during testing but I have changed back all the
3 cases.
Pedro Alves:
I know it was that way before, but would you mind moving this to a helper
proc.
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/foll-vfork.exp (tcatch_vfork_then_parent_follow)
(tcatch_vfork_then_child_follow_exec)
(tcatch_vfork_then_child_follow_exit): Revert back DWARF vfork
identification.
I was getting
gu (print arg0)^M
= 0x7fffffffdafb
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.guile/scm-value/scm-"...^M
(gdb) FAIL: gdb.guile/scm-value.exp: verify dereferenced value
python print (arg0)^M
0x7fffffffdafd
"/unsafebuild-x86_64-redhat-linux-gnu/gdb/testsuite.unix.-m64/outputs/gdb.python/py-value/py-v"...^M
(gdb) FAIL: gdb.python/py-value.exp: verify dereferenced value
and also:
(gdb) p argv[0]^M
$2 = 0x7fffffffd832 "/home/jkratoch/redhat/gdb-test-", 'x' <repeats 169
times>...^M
(gdb) FAIL: gdb.guile/scm-value.exp: argv[0] should be available on this
target
gdb/testsuite/ChangeLog
2016-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.guile/scm-value.exp (test_value_in_inferior): Set print elements
and repeats to unlimited.
* gdb.python/py-value.exp: Likewise.
* lib/gdb.exp (gdb_has_argv0): Save and temporarily set print elements
and repeats to unlimited.
Rather than stuffing the command line with a bunch of -D flags, start
moving things to config.h which is managed by autoheader. This makes
the makefile a bit simpler and the build output tighter, and it makes
the migration to automake easier as there are fewer vars to juggle.
We'll want to move the other options out too, but it'll take more work.
This was imported from the ppc sim, but that was only used to control
a single file, and that is already governed by the hw models. There's
no need to have a sep configure option here, especially since none of
the other sims are using it. Even when the code is enabled, there's
no runtime overhead.
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in
order to make the configure flag available. There's no real reason
to not allow this flag for all ports, so move it to the common sim
macro. This way we get standard behavior across all ports too.
Currently ports have to call SIM_AC_OPTION_ASSERT explicitly in order
to make the configure flag available, which none of them do. There's
no real reason to not allow this flag for all ports, so move it to the
common sim macro. This way we get standard behavior across all ports.
We don't have alternative nltvals.def files, so always symlinking
the targ-vals.def file to it doesn't gain us anything. It does
make the build more complicated though and a pain to convert to
something newer (like automake). Drop the symlinking entirely.
In the future, we'll want to explode this file anyways into the
respective arch dirs so things can be selected dynamically at
runtime, so it's not like we'll be bringing this back.
No other port calls this macro directly, and mips has it hardcoded
to the default -- disabling smp. In the future we'll enable this
for all targets in common code, so tidy up the mips code now.
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order
to make the configure flag available. There's no real reason to not
allow this flag for all ports, so move it to the common sim macro.
This way we get standard behavior across all ports too.
These options were never exposed for most sims (just the ppc one),
and they are really only useful on 32-bit x86 systems. Considering
modern systems tend to be 64-bit x86_64 and how well modern compilers
are at optimizing code, these have outlived their usefulness.
No other sub directory provides such a configuration option, so
drop it from the sim dir as well. This cleans up a good bit of
code in the process.
If people want to use custom flags for just the sim, they can
still run configure+make by hand in the sim subdir and use the
normal CFLAGS settings.
Now that cconfig.h doesn't exist, there's no need to build in the common
subdir anymore. We leave the configure/Makefile files in there as there
is a helper for developers to generate the nltvals.def file. Once that
gets cleaned up in the future though, we can drop the build logic too.
The common subdir sets up a cconfig.h file to hold checks for the common
code. In practice, most files still end up using config.h instead which
just leads to confusion.
Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON
so we can drop the cconfig.h file altogether. Now there is only a single
config.h file like normal.
Regressed by:
commit 762f774785
Author: Pedro Alves <palves@redhat.com>
Date: Thu Dec 10 16:21:06 2015 +0000
Stop using nowarnings in gdb/testsuite/gdb.multi/
+gdb compile failed, gdb/testsuite/gdb.multi/hello.c: In function 'commonfun':
+gdb/testsuite/gdb.multi/hello.c:24:19: warning: implicit declaration of function 'bar' [-Wimplicit-function-declaration]
+ int commonfun() { bar(); } /* from hello */
+ ^
+gdb/testsuite/gdb.multi/hello.c: At top level:
+gdb/testsuite/gdb.multi/hello.c:26:1: warning: return type defaults to 'int' [-Wimplicit-int]
+ bar()
+ ^
+gdb/testsuite/gdb.multi/hello.c:32:1: warning: return type defaults to 'int' [-Wimplicit-int]
+ hello(int x)
+ ^
+gdb/testsuite/gdb.multi/hello.c:38:1: warning: return type defaults to 'int' [-Wimplicit-int]
+ main()
+ ^
+UNTESTED: gdb.multi/base.exp: base.exp
gdb/testsuite/ChangeLog
2016-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.multi/goodbye.c: Fix compilation warnings by adding return types
and reordering the functions.
* gdb.multi/hangout.c: Likewise.
* gdb.multi/hello.c: Likewise.
There are a few errors when trying to run the performance testsuite with
Python 3. This commit fixes them.
In Python 2, it was possible to use relative imports (importing a module
relative to the current one). In Python 3 it isn't. So I use
absolute_import from the __future__ module, which allows Python 2 to
behave like Python 3, and use the Python 3 syntax.
In Python 3, dict.iterkeys doesn't exist anymore. Using dict.keys is a
good compromise in this case.
gdb/testsuite/ChangeLog:
* gdb.perf/lib/perftest/perftest.py: Change relative imports to
absolute.
(SingleStatisticTestResult.report): Use dict.keys instead of
dict.iterkeys.
I see a timeout in gdb.base/random-signal.exp,
Continuing.^M
PASS: gdb.base/random-signal.exp: continue
^CPython Exception <type 'exceptions.KeyboardInterrupt'> <type
exceptions.KeyboardInterrupt'>: ^M
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
it can be reproduced by running random-signal.exp with native-gdbserver
in a loop, like this, and the fail will be shown in about 20 runs,
$ (set -e; while true; do make check RUNTESTFLAGS="--target_board=native-gdbserver random-signal.exp"; done)
In the test, the program is being single-stepped for software watchpoint,
and in each internal stop, python unwinder sniffer is used,
#0 pyuw_sniffer (self=<optimised out>, this_frame=<optimised out>, cache_ptr=0xd554f8) at /home/yao/SourceCode/gnu/gdb/git/gdb/python/py-unwind.c:608
#1 0x00000000006a10ae in frame_unwind_try_unwinder (this_frame=this_frame@entry=0xd554e0, this_cache=this_cache@entry=0xd554f8, unwinder=0xecd540)
at /home/yao/SourceCode/gnu/gdb/git/gdb/frame-unwind.c:107
#2 0x00000000006a143f in frame_unwind_find_by_frame (this_frame=this_frame@entry=0xd554e0, this_cache=this_cache@entry=0xd554f8)
at /home/yao/SourceCode/gnu/gdb/git/gdb/frame-unwind.c:163
#3 0x000000000069dc6b in compute_frame_id (fi=0xd554e0) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:454
#4 get_prev_frame_if_no_cycle (this_frame=this_frame@entry=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1781
#5 0x000000000069fdb9 in get_prev_frame_always_1 (this_frame=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1955
#6 get_prev_frame_always (this_frame=this_frame@entry=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1971
#7 0x00000000006a04b1 in get_prev_frame (this_frame=this_frame@entry=0xd55410) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:2213
when GDB goes to python extension, or other language extension, the
SIGINT handler is changed, and is restored when GDB leaves extension
language. GDB only stays in extension language for a very short period
in this case, but if ctrl-c is pressed at that moment, python extension
will handle the SIGINT, and exceptions.KeyboardInterrupt is shown.
Language extension is used in GDB side rather than inferior side,
so GDB should only change SIGINT handler for extension language when
the terminal is ours (not inferior's). This is what this patch does.
With this patch applied, I run random-signal.exp in a loop for 18
hours, and no fail is shown.
gdb:
2016-01-08 Yao Qi <yao.qi@linaro.org>
* extension.c: Include target.h.
(set_active_ext_lang): Only call install_gdb_sigint_handler,
check_quit_flag, and set_quit_flag if target_terminal_is_ours
returns false.
(restore_active_ext_lang): Likewise.
* target.c (target_terminal_is_ours): New function.
* target.h (target_terminal_is_ours): Declare.
Hi,
I see timeout in one of several runs of random-signal.exp like this,
$ (set -e; while true; do make check RUNTESTFLAGS="--target_board=native-gdbserver random-signal.exp"; done)
In about every five runs, we can see a fail,
PASS: gdb.base/random-signal.exp: continue
^CFAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
after some investigation, I find '\003' may be discarded by GDBserver when
it is expecting '$'. In GDB side, both normal packets and '\003' are sent
via function send, but GDBserver may receive them at any time, that is to
say, in the receive buffer in GDBserver, '\003' may appear before or after
normal packet. However, current GDBserver doesn't handle this case.
With this patch applied, I don't see this fail in multiple runs.
Although there is still timeout fail, that is a different problem, the
next patch will fix it.
gdb/gdbserver:
2016-01-08 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (getpkt): If c is '\003', call target hook
request_interrupt.
For ISA_B/C only the combination #,d(An) is allowed in addition to the
ISA_A combinations for move.b and move.w (and pc-relative is never
allowed as destination).
opcodes/
PR gas/13050
* m68k-opc.c (moveb, movew): For ISA_B/C only allow #,d(An) in
addition to ISA_A.
gas/
PR gas/13050
* testsuite/gas/m68k/all.exp: Add tests p13050-1 and p13050-2.
* testsuite/gas/m68k/p13050-1.s: New file.
* testsuite/gas/m68k/p13050-2.d: New file.
* testsuite/gas/m68k/p13050-2.s: New file.
Complement commit d09f2c3f [target_read_memory&co: no longer return
target_xfer_status] and apply the same change made to the big-endian leg
of the function to the little-endian leg as well.
gdb/
* mips-tdep.c (mips_breakpoint_from_pc): Rename local `status'
to `err' in the little-endian leg.