GDB's current behavior when dealing with non-local references in the
context of nested fuctions is approximative:
- code using valops.c:value_of_variable read the first available stack
frame that holds the corresponding variable (whereas there can be
multiple candidates for this);
- code directly relying on read_var_value will instead read non-local
variables in frames where they are not even defined.
This change adds the necessary context to symbol reads (to get the block
they belong to) and to blocks (the static link property, if any) so that
GDB can make the proper decisions when dealing with non-local varibale
references.
gdb/ChangeLog:
* ada-lang.c (ada_read_var_value): Add a var_block argument
and pass it to default_read_var_value.
* block.c (block_static_link): New accessor.
* block.h (block_static_link): Declare it.
* buildsym.c (finish_block_internal): Add a static_link
argument. If there is a static link, associate it to the new
block.
(finish_block): Add a static link argument and pass it to
finish_block_internal.
(end_symtab_get_static_block): Update calls to finish_block and
to finish_block_internal.
(end_symtab_with_blockvector): Update call to
finish_block_internal.
* buildsym.h: Forward-declare struct dynamic_prop.
(struct context_stack): Add a static_link field.
(finish_block): Add a static link argument.
* c-exp.y: Remove an obsolete comment (evaluation of variables
already start from the selected frame, and now they climb *up*
the call stack) and propagate the block information to the
produced expression.
* d-exp.y: Likewise.
* f-exp.y: Likewise.
* go-exp.y: Likewise.
* jv-exp.y: Likewise.
* m2-exp.y: Likewise.
* p-exp.y: Likewise.
* coffread.c (coff_symtab_read): Update calls to finish_block.
* dbxread.c (process_one_symbol): Likewise.
* xcoffread.c (read_xcoff_symtab): Likewise.
* compile/compile-c-symbols.c (convert_one_symbol): Promote the
"sym" parameter to struct block_symbol, update its uses and pass
its block to calls to read_var_value.
(convert_symbol_sym): Update the calls to convert_one_symbol.
* compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update
call to read_var_value.
* dwarf2loc.c (block_op_get_frame_base): New.
(dwarf2_block_frame_base_locexpr_funcs): Implement the
get_frame_base method.
(dwarf2_block_frame_base_loclist_funcs): Likewise.
(dwarf2locexpr_baton_eval): Add a frame argument and use it
instead of the selected frame in order to evaluate the
expression.
(dwarf2_evaluate_property): Add a frame argument. Update call
to dwarf2_locexpr_baton_eval to provide a frame in available and
to handle the absence of address stack.
* dwarf2loc.h (dwarf2_evaluate_property): Add a frame argument.
* dwarf2read.c (attr_to_dynamic_prop): Add a forward
declaration.
(read_func_scope): Record any available static link description.
Update call to finish_block.
(read_lexical_block_scope): Update call to finish_block.
* findvar.c (follow_static_link): New.
(get_hosting_frame): New.
(default_read_var_value): Add a var_block argument. Use
get_hosting_frame to handle non-local references.
(read_var_value): Add a var_block argument and pass it to the
LA_READ_VAR_VALUE method.
* gdbtypes.c (resolve_dynamic_range): Update calls to
dwarf2_evaluate_property.
(resolve_dynamic_type_internal): Likewise.
* guile/scm-frame.c (gdbscm_frame_read_var): Update call to
read_var_value, passing it the block coming from symbol lookup.
* guile/scm-symbol.c (gdbscm_symbol_value): Update call to
read_var_value (TODO).
* infcmd.c (finish_command_continuation): Update call to
read_var_value, passing it the block coming from symbol lookup.
* infrun.c (insert_exception_resume_breakpoint): Likewise.
* language.h (struct language_defn): Add a var_block argument to
the LA_READ_VAR_VALUE method.
* objfiles.c (struct static_link_htab_entry): New.
(static_link_htab_entry_hash): New.
(static_link_htab_entry_eq): New.
(objfile_register_static_link): New.
(objfile_lookup_static_link): New.
(free_objfile): Free the STATIC_LINKS hashed map if needed.
* objfiles.h: Include hashtab.h.
(struct objfile): Add a static_links field.
(objfile_register_static_link): New.
(objfile_lookup_static_link): New.
* printcmd.c (print_variable_and_value): Update call to
read_var_value.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-frame.c (frapy_read_var): Update call to
read_var_value, passing it the block coming from symbol lookup.
* python/py-framefilter.c (extract_sym): Add a sym_block
parameter and set the pointed value to NULL (TODO).
(enumerate_args): Update call to extract_sym.
(enumerate_locals): Update calls to extract_sym and to
read_var_value.
* python/py-symbol.c (sympy_value): Update call to
read_var_value (TODO).
* stack.c (read_frame_local): Update call to read_var_value.
(read_frame_arg): Likewise.
(return_command): Likewise.
* symtab.h (struct symbol_block_ops): Add a get_frame_base
method.
(struct symbol): Add a block field.
(SYMBOL_BLOCK): New accessor.
* valops.c (value_of_variable): Remove frame/block handling and
pass the block argument to read_var_value, which does this job
now.
(value_struct_elt_for_reference): Update calls to
read_var_value.
(value_of_this): Pass the block found to read_var_value.
* value.h (read_var_value): Add a var_block argument.
(default_read_var_value): Likewise.
gdb/testsuite/ChangeLog:
* gdb.base/nested-subp1.exp: New file.
* gdb.base/nested-subp1.c: New file.
* gdb.base/nested-subp2.exp: New file.
* gdb.base/nested-subp2.c: New file.
* gdb.base/nested-subp3.exp: New file.
* gdb.base/nested-subp3.c: New file.
This patch is mostly extracted from Pedro's C++ branch. It adds explicit
casts from integer to enum types, where it is really the intention to do
so. This could be because we are ...
* iterating on enum values (we need to iterate on an equivalent integer)
* converting from a value read from bytes (dwarf attribute, agent
expression opcode) to the equivalent enum
* reading the equivalent integer value from another language (Python/Guile)
An exception to that is the casts in regcache.c. It seems to me like
struct regcache's register_status field could be a pointer to an array of
enum register_status. Doing so would waste a bit of memory (4 bytes
used by the enum vs 1 byte used by the current signed char, for each
register). If we switch to C++11 one day, we can define the underlying
type of an enum type, so we could have the best of both worlds.
gdb/ChangeLog:
* arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum.
(arm_set_abi): Likewise.
* ax-general.c (ax_print): Likewise.
* c-exp.y (exp : string_exp): Likewise.
* compile/compile-loc2c.c (compute_stack_depth_worker): Likewise.
(do_compile_dwarf_expr_to_c): Likewise.
* cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start):
Likewise.
* dwarf2expr.c (execute_stack_op): Likewise.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
(disassemble_dwarf_expression): Likewise.
* dwarf2read.c (dwarf2_add_member_fn): Likewise.
(read_array_order): Likewise.
(abbrev_table_read_table): Likewise.
(read_attribute_value): Likewise.
(skip_unknown_opcode): Likewise.
(dwarf_decode_macro_bytes): Likewise.
(dwarf_decode_macros): Likewise.
* eval.c (value_f90_subarray): Likewise.
* guile/scm-param.c (gdbscm_make_parameter): Likewise.
* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
* infrun.c (handle_command): Likewise.
* memory-map.c (memory_map_start_memory): Likewise.
* osabi.c (set_osabi): Likewise.
* parse.c (operator_length_standard): Likewise.
* ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use
single return point.
* python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
* python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
(gdbpy_lookup_global_symbol): Likewise.
* record-full.c (record_full_restore): Likewise.
* regcache.c (regcache_register_status): Likewise.
(regcache_raw_read): Likewise.
(regcache_cooked_read): Likewise.
* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
* symtab.c (initialize_ordinary_address_classes): Likewise.
* target-debug.h (target_debug_print_signals): Likewise.
* utils.c (do_restore_current_language): Likewise.
Initially there is some chain (let's say the longest one
but that doe snot matter). Consequently its elements from the middle are
being removed and there remains only some few unambiguous top and bottom ones.
The original idea why the comparison should be sharp ("<") was that if there
are multiple chains like (0xaddr show jmp instruction address):
main(0x100) -> a(0x200) -> d(0x400)
main(0x100) -> a(0x200) -> c(0x300) -> d(0x400)
then - such situation cannot exist - if two jmp instructions in "a" have the
same address they must also jump to the same address (*).
(*) jump to a computed address would be never considered for the DWARF
tail-call records.
So there could be:
main(0x100) -> a(0x200) -> d(0x400)
main(0x100) -> a(0x270) -> c(0x300) -> d(0x400)
But then "a" frame itself is ambiguous and it must not be displayed.
I did not realize that there can be self-tail-call:
main(0x100) -> a(0x200) -> d(0x400)
main(0x100) -> a(0x280) -> a(0x200) -> d(0x400)
which intersects to:
main(0x100) -> <???>? -> a(0x200) -> d(0x400)
And so if the first chain was chosen the
main(0x100) -> a(0x200) -> d(0x400)
then the final intersection has callers+callees==length.
> for example, if CALLERS is 3 and
> CALLEES is 2, what does the chain look like?
main(0x100) -> x(0x150) -> y(0x200) -> <???>? -> a(0x200) -> d(0x400)
And if LENGTH is 7 then:
call_site[0] = main(0x100)
call_site[1] = x(0x150)
call_site[2] = y(0x200)
call_site[3] = garbage
call_site[4] = garbage
call_site[5] = a(0x200)
call_site[6] = d(0x400)
gdb/ChangeLog
2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
Jan Kratochvil <jan.kratochvil@redhat.com>
PR symtab/18392
* dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
assertion.
* dwarf2loc.c (chain_candidate): Likewise.
gdb/testsuite/ChangeLog
2015-06-01 Jan Kratochvil <jan.kratochvil@redhat.com>
PR symtab/18392
* gdb.arch/amd64-tailcall-self.S: New file.
* gdb.arch/amd64-tailcall-self.c: New file.
* gdb.arch/amd64-tailcall-self.exp: New file.
This is the second part of enhancing the debugger to print the value
of arrays of records whose size is variable when only standard DWARF
info is available (no GNAT encoding). For instance:
subtype Small_Type is Integer range 0 .. 10;
type Record_Type (I : Small_Type := 0) is record
S : String (1 .. I);
end record;
type Array_Type is array (Integer range <>) of Record_Type;
A1 : Array_Type := (1 => (I => 0, S => <>),
2 => (I => 1, S => "A"),
3 => (I => 2, S => "AB"));
Currently, GDB prints the following output:
(gdb) p a1
$1 = (
The error happens while the ada-valprint module is trying to print
the value of an element of our array. Because of the fact that
the array's element (type Record_Type) has a variant size, the DWARF
info for our array provide the array's stride:
<1><749>: Abbrev Number: 10 (DW_TAG_array_type)
<74a> DW_AT_name : (indirect string, offset: 0xb6d): pck__T18s
<74e> DW_AT_byte_stride : 16
<74f> DW_AT_type : <0x6ea>
And because our array has a stride, ada-valprint treats it the same
way as packed arrays (see ada-valprint.c::ada_val_print_array):
if (TYPE_FIELD_BITSIZE (type, 0) > 0)
val_print_packed_array_elements (type, valaddr, offset_aligned,
0, stream, recurse,
original_value, options);
The first thing that we should notice in the call above is that
the "valaddr" buffer and the associated offset (OFFSET_ALIGNED)
is passed, but that the corresponding array's address is not.
This can be explained by looking inside val_print_packed_array_elements,
where we see that the function unpacks each element of our array from
the buffer alone (ada_value_primitive_packed_val), and then prints
the resulting artificial value instead:
v0 = ada_value_primitive_packed_val (NULL, valaddr + offset,
(i0 * bitsize) / HOST_CHAR_BIT,
(i0 * bitsize) % HOST_CHAR_BIT,
bitsize, elttype);
[...]
val_print (elttype, value_contents_for_printing (v0),
value_embedded_offset (v0), 0, stream,
recurse + 1, v0, &opts, current_language);
Of particular interest, here, is the fact that we call val_print
with a null address, which is OK, since we're providing a buffer
instead (value_contents_for_printing). Also, providing an address
might not always possible, since packing could place elements at
boundaries that are not byte-aligned.
Things go south when val_print tries to see if there is a pretty-printer
that could be applied. In particular, one of the first things that
the Python pretty-printer does is to create a value using our buffer,
and the given address, which in this case is null (see call to
value_from_contents_and_address in gdbpy_apply_val_pretty_printer).
value_from_contents_and_address, in turn immediately tries to resolve
the type, using the given address, which is null. But, because our
array element is a record containing an array whose bound is the value
of one of its elements (the "s" component), the debugging info for
the array's upper bound is a reference...
<3><71a>: Abbrev Number: 7 (DW_TAG_subrange_type)
<71b> DW_AT_type : <0x724>
<71f> DW_AT_upper_bound : <0x703>
... to component "i" of our record...
<2><703>: Abbrev Number: 5 (DW_TAG_member)
<704> DW_AT_name : i
<706> DW_AT_decl_file : 2
<707> DW_AT_decl_line : 6
<708> DW_AT_type : <0x6d1>
<70c> DW_AT_data_member_location: 0
... where that component is located at offset 0 of the start
of the record. dwarf2_evaluate_property correctly determines
the offset where to load the value of the bound from, but then
tries to read that value from inferior memory using the address
that was given, which is null. See case PROP_ADDR_OFFSET in
dwarf2_evaluate_property:
val = value_at (baton->offset_info.type,
pinfo->addr + baton->offset_info.offset);
This triggers a memory error, which then causes the printing to terminate.
Since there are going to be situations where providing an address
alone is not going to be sufficient (packed arrays where array elements
are not stored at byte boundaries), this patch fixes the issue by
enhancing the type resolution to take both address and data. This
follows the same principle as the val_print module, where both
address and buffer ("valaddr") can be passed as arguments. If the data
has already been fetched from inferior memory (or provided by the
debugging info in some form -- Eg a constant), then use that data
instead of reading it from inferior memory.
Note that this should also be a good step towards being able to handle
dynamic types whose value is stored outside of inferior memory
(Eg: in a register).
With this patch, GDB isn't able to print all of A1, but does perform
a little better:
(gdb) p a1
$1 = ((i => 0, s => , (i => 1, s => , (i => 2, s => )
There is another issue which is independent of this one, and will
therefore be patched separately.
gdb/ChangeLog:
* dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
* dwarf2loc.c (dwarf2_evaluate_property): Add handling of
pinfo->valaddr.
* gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
* gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
(resolve_dynamic_type_internal): Set pinfo.valaddr.
Add handling of addr_stack->valaddr.
(resolve_dynamic_type): Add "valaddr" parameter.
Set pinfo.valaddr field.
* ada-lang.c (ada_discrete_type_high_bound): Update call to
resolve_dynamic_type.
(ada_discrete_type_low_bound): Likewise.
* findvar.c (default_read_var_value): Likewise.
* value.c (value_from_contents_and_address): Likewise.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
In C, we can forward declare static structure instances. That doesn't
work in C++ though. C++ treats these as definitions. So then the
compiler complains about symbol redefinition, like:
src/gdb/elfread.c:1569:29: error: redefinition of ‘const sym_fns elf_sym_fns_lazy_psyms’
src/gdb/elfread.c:53:29: error: ‘const sym_fns elf_sym_fns_lazy_psyms’ previously declared here
The intent of static here is naturally to avoid making these objects
visible outside the compilation unit. The equivalent in C++ would be
to instead define the objects in the anonymous namespace. But given
that it's desirable to leave the codebase compiling as both C and C++
for a while, this just makes the objects extern.
(base_breakpoint_ops is already declared in breakpoint.h, so we can
just remove the forward declare from breakpoint.c)
gdb/ChangeLog:
2015-02-11 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* breakpoint.c (base_breakpoint_ops): Delete.
* dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
* elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
* guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
* ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
* python/py-arch.c (arch_object_type): Make extern.
* python/py-block.c (block_syms_iterator_object_type): Make extern.
* python/py-bpevent.c (breakpoint_event_object_type): Make extern.
* python/py-cmd.c (cmdpy_object_type): Make extern.
* python/py-continueevent.c (continue_event_object_type)
* python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
parameter. Update all callers.
* python/py-evtregistry.c (eventregistry_object_type): Make extern.
* python/py-exitedevent.c (exited_event_object_type): Make extern.
* python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
* python/py-function.c (fnpy_object_type): Make extern.
* python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
* python/py-infevents.c (call_pre_event_object_type)
(inferior_call_post_event_object_type).
(memory_changed_event_object_type): Make extern.
* python/py-infthread.c (thread_object_type): Make extern.
* python/py-lazy-string.c (lazy_string_object_type): Make extern.
* python/py-linetable.c (linetable_entry_object_type)
(linetable_object_type, ltpy_iterator_object_type): Make extern.
* python/py-newobjfileevent.c (new_objfile_event_object_type)
(clear_objfiles_event_object_type): Make extern.
* python/py-objfile.c (objfile_object_type): Make extern.
* python/py-param.c (parmpy_object_type): Make extern.
* python/py-progspace.c (pspace_object_type): Make extern.
* python/py-signalevent.c (signal_event_object_type): Make extern.
* python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
* python/py-type.c (type_object_type, field_object_type)
(type_iterator_object_type): Make extern.
* python/python.c (python_extension_script_ops)
(python_extension_ops): Make extern.
* stap-probe.c (stap_probe_ops): Make extern.
Consider the following declarations:
type Array_Type is array (Integer range <>) of Integer;
type Record_Type (N : Integer) is record
A : Array_Type (1 .. N);
end record;
R : Record_Type := Get (10);
It defines what Ada programers call a "discriminated record", where
"N" is a component of that record called a "discriminant", and where
"A" is a component defined as an array type whose upper bound is
equal to the value of the discriminant.
So far, we rely on a number of fairly complex GNAT-specific encodings
to handle this situation. This patch is to enhance GDB to be able to
print this record in the case where the compiler has been modified
to replace those encodings by pure DWARF constructs.
In particular, the debugging information generated for the record above
looks like the following. "R" is a record..
.uleb128 0x10 # (DIE (0x13e) DW_TAG_structure_type)
.long .LASF17 # DW_AT_name: "foo__record_type"
... whose is is of course dynamic (not our concern here)...
.uleb128 0xd # DW_AT_byte_size
.byte 0x97 # DW_OP_push_object_address
.byte 0x94 # DW_OP_deref_size
.byte 0x4
.byte 0x99 # DW_OP_call4
.long 0x19b
.byte 0x23 # DW_OP_plus_uconst
.uleb128 0x7
.byte 0x9 # DW_OP_const1s
.byte 0xfc
.byte 0x1a # DW_OP_and
.byte 0x1 # DW_AT_decl_file (foo.adb)
.byte 0x6 # DW_AT_decl_line
... and then has 2 members, fist "n" (our discriminant);
.uleb128 0x11 # (DIE (0x153) DW_TAG_member)
.ascii "n\0" # DW_AT_name
.byte 0x1 # DW_AT_decl_file (foo.adb)
.byte 0x6 # DW_AT_decl_line
.long 0x194 # DW_AT_type
.byte 0 # DW_AT_data_member_location
... and "A"...
.uleb128 0x11 # (DIE (0x181) DW_TAG_member)
.ascii "a\0" # DW_AT_name
.long 0x15d # DW_AT_type
.byte 0x4 # DW_AT_data_member_location
... which is an array ...
.uleb128 0x12 # (DIE (0x15d) DW_TAG_array_type)
.long .LASF18 # DW_AT_name: "foo__record_type__T4b"
.long 0x194 # DW_AT_type
... whose lower bound is implicitly 1, and the upper bound
a reference to DIE 0x153 = "N":
.uleb128 0x13 # (DIE (0x16a) DW_TAG_subrange_type)
.long 0x174 # DW_AT_type
.long 0x153 # DW_AT_upper_bound
This patch enhanced GDB to understand references to other DIEs
where the DIE's address is at an offset of its enclosing type.
The difficulty was that the address used to resolve the array's
type (R's address + 4 bytes) is different from the address used
as the base to compute N's address (an offset to R's address).
We're solving this issue by using a stack of addresses rather
than a single address when trying to resolve a type. Each address
in the stack corresponds to each containing level. For instance,
if resolving the field of a struct, the stack should contain
the address of the field at the top, and then the address of
the struct. That way, if the field makes a reference to an object
of the struct, we can retrieve the address of that struct, and
properly resolve the dynamic property references that struct.
gdb/ChangeLog:
* gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
kind.
* gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
parameter by "addr_stack" parameter.
(resolve_dynamic_range): Replace "addr" parameter by
"stack_addr" parameter. Update function documentation.
Update code accordingly.
(resolve_dynamic_array, resolve_dynamic_union)
(resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
(resolve_dynamic_type): Update code, following the changes made
to resolve_dynamic_type_internal's interface.
* dwarf2loc.h (struct property_addr_info): New.
(dwarf2_evaluate_property): Replace "address" parameter
by "addr_stack" parameter. Adjust function documentation.
(struct dwarf2_offset_baton): New.
(struct dwarf2_property_baton): Update documentation of
field "referenced_type" to be more general. New field
"offset_info" in union data field.
* dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
parameter by "addr_stack" parameter. Adjust code accordingly.
Add support for PROP_ADDR_OFFSET properties.
* dwarf2read.c (attr_to_dynamic_prop): Add support for
DW_AT_data_member_location attributes as well. Use case
statements instead of if/else condition.
gdb/testsuite/ChangeLog:
* gdb.ada/disc_arr_bound: New testcase.
Tested on x86_64-linux, no regression.
I see the error message "access outside bounds of object referenced
via synthetic pointer" in the two fails below of mips gdb testing
print d[-2]^M
access outside bounds of object referenced via synthetic pointer^M
(gdb) FAIL: gdb.dwarf2/implptrconst.exp: print d[-2]
(gdb) print/d p[-1]^M
access outside bounds of object referenced via synthetic pointer^M
(gdb) FAIL: gdb.dwarf2/implptrpiece.exp: print/d p[-1]
in the first test, 'd[-2]' is processed by GDB as '* (&d[-2])'. 'd'
is a synthetic pointer, so its value is zero, the address of 'd[-2]'
is -2. In dwarf2loc.c:indirect_pieced_value,
/* This is an offset requested by GDB, such as value subscripts.
However, due to how synthetic pointers are implemented, this is
always presented to us as a pointer type. This means we have to
sign-extend it manually as appropriate. */
byte_offset = value_as_address (value);
if (TYPE_LENGTH (value_type (value)) < sizeof (LONGEST))
byte_offset = gdb_sign_extend (byte_offset,
8 * TYPE_LENGTH (value_type (value)));
byte_offset += piece->v.ptr.offset;
We know that the value is really an offset instead of address, so the
fix is to extract the value as an (signed) offset.
gdb:
2015-01-08 Pedro Alves <palves@redhat.com>
Yao Qi <yao@codesourcery.com>
* dwarf2loc.c (indirect_pieced_value): Don't call
gdb_sign_extend. Call extract_signed_integer instead.
* utils.c (gdb_sign_extend): Remove.
* utils.h (gdb_sign_extend): Remove declaration.
This final patch adds the new "compile" command and subcommands, and
all the machinery needed to make it work.
A shared library supplied by gcc is used for all communications with
gcc. Types and most aspects of symbols are provided directly by gdb
to the compiler using this library.
gdb provides some information about the user's code using plain text.
Macros are emitted this way, and DWARF location expressions (and
bounds for VLA) are compiled to C code.
This hybrid approach was taken because, on the one hand, it is better
to provide global declarations and such on demand; but on the other
hand, for local variables, translating DWARF location expressions to C
was much simpler than exporting a full compiler API to gdb -- the same
result, only easier to implement, understand, and debug.
In the ordinary mode, the user's expression is wrapped in a dummy
function. After compilation, gdb inserts the resulting object code
into the inferior, then calls this function.
Access to local variables is provided by noting which registers are
used by location expressions, and passing a structure of register
values into the function. Writes to registers are supported by
copying out these values after the function returns.
This approach was taken so that we could eventually implement other
more interesting features based on this same infrastructure; for
example, we're planning to investigate inferior-side breakpoint
conditions.
gdb/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Update.
* symtab.h (struct symbol_computed_ops) <generate_c_location>: New
field.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_get_compile_instance,
la_compute_program>: New fields.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* dwarf2loc.h (dwarf2_compile_property_to_c): Declare.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): New
functions.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum compile_i_scope_types): New.
(enum command_control_type) <compile_control>: New constant.
(struct command_line) <control_u>: New field.
* d-lang.c (d_language_defn): Update.
* compile/compile.c: New file.
* compile/compile-c-support.c: New file.
* compile/compile-c-symbols.c: New file.
* compile/compile-c-types.c: New file.
* compile/compile.h: New file.
* compile/compile-internal.h: New file.
* compile/compile-loc2c.c: New file.
* compile/compile-object-load.c: New file.
* compile/compile-object-load.h: New file.
* compile/compile-object-run.c: New file.
* compile/compile-object-run.h: New file.
* cli/cli-script.c (multi_line_command_p, print_command_lines)
(execute_control_command, process_next_line)
(recurse_read_control_structure): Handle compile_control.
* c-lang.h (c_get_compile_context, c_compute_program): Declare.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_language_defn): Update.
* Makefile.in (SUBDIR_GCC_COMPILE_OBS, SUBDIR_GCC_COMPILE_SRCS):
New variables.
(SFILES): Add SUBDIR_GCC_COMPILE_SRCS.
(HFILES_NO_SRCDIR): Add compile.h.
(COMMON_OBS): Add SUBDIR_GCC_COMPILE_OBS.
(INIT_FILES): Add SUBDIR_GCC_COMPILE_SRCS.
(compile.o, compile-c-types.o, compile-c-symbols.o)
(compile-object-load.o, compile-object-run.o, compile-loc2c.o)
(compile-c-support.o): New targets.
gdb/doc/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Altering): Update.
(Compiling and Injecting Code): New node.
gdb/testsuite/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* configure.ac: Add gdb.compile/.
* configure: Regenerate.
* gdb.compile/Makefile.in: New file.
* gdb.compile/compile-ops.exp: New file.
* gdb.compile/compile-ops.c: New file.
* gdb.compile/compile-tls.c: New file.
* gdb.compile/compile-tls.exp: New file.
* gdb.compile/compile-constvar.S: New file.
* gdb.compile/compile-constvar.c: New file.
* gdb.compile/compile-mod.c: New file.
* gdb.compile/compile-nodebug.c: New file.
* gdb.compile/compile-setjmp-mod.c: New file.
* gdb.compile/compile-setjmp.c: New file.
* gdb.compile/compile-setjmp.exp: New file.
* gdb.compile/compile-shlib.c: New file.
* gdb.compile/compile.c: New file.
* gdb.compile/compile.exp: New file.
* lib/gdb.exp (skip_compile_feature_tests): New proc.
This exports a utility function, dwarf2_reg_to_regnum_or_error, that
was previously private to dwarf2loc.c.
gdb/ChangeLog
2014-12-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2loc.h (dwarf2_reg_to_regnum_or_error): Declare.
* dwarf2loc.c (dwarf2_reg_to_regnum_or_error): Rename from
translate_register. Now public.
(dwarf2_compile_expr_to_ax): Update.
This exports dwarf_expr_frame_base_1 so that other code can use it.
gdb/ChangeLog
2014-12-12 Tom Tromey <tromey@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2loc.c (dwarf_expr_frame_base_1): Remove declaration.
(dwarf_expr_frame_base): Update caller.
(dwarf_expr_frame_base_1): Rename to ...
(func_get_frame_base_dwarf_block): ... this and make it public.
(dwarf2_compile_expr_to_ax, locexpr_describe_location_piece): Update
callers.
* dwarf2loc.h (func_get_frame_base_dwarf_block): New declaration.
This removes dwarf2_compile_expr_to_ax, replacing it with a utility
function that fetches the CFA data and adding the code to actually
compile to an agent expression directly into
dwarf2_compile_expr_to_ax. This refactoring lets a later patch reuse
the new dwarf2_fetch_cfa_info.
gdb/ChangeLog
2014-12-12 Tom Tromey <tromey@redhat.com>
* dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_call_frame_cfa>:
Update.
* dwarf2-frame.c (dwarf2_fetch_cfa_info): New function, based on
dwarf2_compile_cfa_to_ax.
(dwarf2_compile_cfa_to_ax): Remove.
* dwarf2-frame.h (dwarf2_fetch_cfa_info): Declare.
(dwarf2_compile_cfa_to_ax): Remove.
1. Background information
The MIPS architecture, as originally designed and implemented in
mid-1980s has a uniform instruction word size that is 4 bytes, naturally
aligned. As such all MIPS instructions are located at addresses that
have their bits #1 and #0 set to zeroes, and any attempt to execute an
instruction from an address that has any of the two bits set to one
causes an address error exception. This may for example happen when a
jump-register instruction is executed whose register value used as the
jump target has any of these bits set.
Then in mid 1990s LSI sought a way to improve code density for their
TinyRISC family of MIPS cores and invented an alternatively encoded
instruction set in a joint effort with MIPS Technologies (then a
subsidiary of SGI). The new instruction set has been named the MIPS16
ASE (Application-Specific Extension) and uses a variable instruction
word size, which is 2 bytes (as the name of the ASE suggests) for most,
but there are a couple of exceptions that take 4 bytes, and then most of
the 2-byte instructions can be treated with a 2-byte extension prefix to
expand the range of the immediate operands used.
As a result instructions are no longer 4-byte aligned, instead they are
aligned to a multiple of 2. That left the bit #0 still unused for code
references, be it for the standard MIPS (i.e. as originally invented) or
for the MIPS16 instruction set, and based on that observation a clever
trick was invented that on one hand allowed the processor to be
seamlessly switched between the two instruction sets at any time at the
run time while on the other avoided the introduction of any special
control register to do that.
So it is the bit #0 of the instruction address that was chosen as the
selector and named the ISA bit. Any instruction executed at an even
address is interpreted as a standard MIPS instruction (the address still
has to have its bit #1 clear), any instruction executed at an odd
address is interpreted as a MIPS16 instruction.
To switch between modes ordinary jump instructions are used, such as
used for function calls and returns, specifically the bit #0 of the
source register used in jump-register instructions selects the execution
(ISA) mode for the following piece of code to be interpreted in.
Additionally new jump-immediate instructions were added that flipped the
ISA bit to select the opposite mode upon execution. They were
considered necessary to avoid the need to make register jumps in all
cases as the original jump-immediate instructions provided no way to
change the bit #0 at all.
This was all important for cases where standard MIPS and MIPS16 code had
to be mixed, either for compatibility with the existing binary code base
or to access resources not reachable from MIPS16 code (the MIPS16
instruction set only provides access to general-purpose registers, and
not for example floating-point unit registers or privileged coprocessor
0 registers) -- pieces of code in the opposite mode can be executed as
ordinary subroutine calls.
A similar approach has been more recently adopted for the MIPS16
replacement instruction set defined as the so called microMIPS ASE.
This is another instruction set encoding introduced to the MIPS
architecture. Just like the MIPS16 ASE, the microMIPS instruction set
uses a variable-length encoding, where each instruction takes a multiple
of 2 bytes. The ISA bit has been reused and for microMIPS-capable
processors selects between the standard MIPS and the microMIPS mode
instead.
2. Statement of the problem
To put it shortly, MIPS16 and microMIPS code pointers used by GDB are
different to these observed at the run time. This results in the same
expressions being evaluated producing different results in GDB and in
the program being debugged. Obviously it's the results obtained at the
run time that are correct (they define how the program behaves) and
therefore by definition the results obtained in GDB are incorrect.
A bit longer description will record that obviously at the run time the
ISA bit has to be set correctly (refer to background information above
if unsure why so) or the program will not run as expected. This is
recorded in all the executable file structures used at the run time: the
dynamic symbol table (but not always the static one!), the GOT, and
obviously in all the addresses embedded in code or data of the program
itself, calculated by applying the appropriate relocations at the static
link time.
While a program is being processed by GDB, the ISA bit is stripped off
from any code addresses, presumably to make them the same as the
respective raw memory byte address used by the processor to access the
instruction in the instruction fetch access cycle. This stripping is
actually performed outside GDB proper, in BFD, specifically
_bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at
the very bottom of that function, starting with an: "If this is an
odd-valued function symbol, assume it's a MIPS16 or microMIPS one."
comment).
This function is also responsible for symbol table dumps made by
`objdump' too, so you'll never see the ISA bit reported there by that
tool, you need to use `readelf'.
This is however unlike what is ever done at the run time, the ISA bit
once present is never stripped off, for example a cast like this:
(short *) main
will not strip the ISA bit off and if the resulting pointer is intended
to be used to access instructions as data, for example for software
instruction decoding (like for fault recovery or emulation in a signal
handler) or for self-modifying code then the bit still has to be
stripped off by an explicit AND operation.
This is probably best illustrated with a simple real program example.
Let's consider the following simple program:
$ cat foobar.c
int __attribute__ ((mips16)) foo (void)
{
return 1;
}
int __attribute__ ((mips16)) bar (void)
{
return 2;
}
int __attribute__ ((nomips16)) foo32 (void)
{
return 3;
}
int (*foo32p) (void) = foo32;
int (*foop) (void) = foo;
int fooi = (int) foo;
int
main (void)
{
return foop ();
}
$
This is plain C with no odd tricks, except from the instruction mode
attributes. They are not necessary to trigger this problem, I just put
them here so that the program can be contained in a single source file
and to make it obvious which function is MIPS16 code and which is not.
Let's try it with Linux, so that everyone can repeat this experiment:
$ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c
$
Let's have a look at some interesting symbols:
$ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 7 entries:
Symbol table '.symtab' contains 95 entries:
55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c
66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar
68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p
70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop
78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32
80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo
88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi
$
Hmm, no sight of the ISA bit, but notice how foo and bar (but not
foo32!) have been marked as MIPS16 functions (ELF symbol structure's
`st_other' field is used for that).
So let's try to run and poke at this program with GDB. I'll be using a
native system for simplicity (I'll be using ellipses here and there to
remove unrelated clutter):
$ ./foobar
$ echo $?
1
$
So far, so good.
$ gdb ./foobar
[...]
(gdb) break main
Breakpoint 1 at 0x400490: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb)
Yay, it worked! OK, so let's poke at it:
(gdb) print main
$1 = {int (void)} 0x400490 <main>
(gdb) print foo32
$2 = {int (void)} 0x400684 <foo32>
(gdb) print foo32p
$3 = (int (*)(void)) 0x400684 <foo32>
(gdb) print bar
$4 = {int (void)} 0x40068c <bar>
(gdb) print foo
$5 = {int (void)} 0x400680 <foo>
(gdb) print foop
$6 = (int (*)(void)) 0x400681 <foo>
(gdb)
A-ha! Here's the difference and finally the ISA bit!
(gdb) print /x fooi
$7 = 0x400681
(gdb) p/x $pc
p/x $pc
$8 = 0x400491
(gdb)
And here as well...
(gdb) advance foo
foo () at foobar.c:4
4 }
(gdb) disassemble
Dump of assembler code for function foo:
0x00400680 <+0>: jr ra
0x00400682 <+2>: li v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0 foo () at foobar.c:4
main () at foobar.c:24
24 }
Value returned is $9 = 1
(gdb) continue
Continuing.
[Inferior 1 (process 14103) exited with code 01]
(gdb)
So let's be a bit inquisitive...
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb)
Actually we do not like to run foo here at all. Let's run bar instead!
(gdb) set foop = bar
(gdb) print foop
$10 = (int (*)(void)) 0x40068c <bar>
(gdb)
Hmm, no ISA bit. Is it going to work?
(gdb) advance bar
bar () at foobar.c:9
9 }
(gdb) p/x $pc
$11 = 0x40068c
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068c <+0>: jr ra
0x0040068e <+2>: li v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0 bar () at foobar.c:9
Program received signal SIGILL, Illegal instruction.
bar () at foobar.c:9
9 }
(gdb)
Oops!
(gdb) p/x $pc
$12 = 0x40068c
(gdb)
We're still there!
(gdb) continue
Continuing.
Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)
So let's try something else:
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) set foop = foo
(gdb) advance foo
foo () at foobar.c:4
4 }
(gdb) disassemble
Dump of assembler code for function foo:
=> 0x00400680 <+0>: jr ra
0x00400682 <+2>: li v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0 foo () at foobar.c:4
Program received signal SIGILL, Illegal instruction.
foo () at foobar.c:4
4 }
(gdb) continue
Continuing.
Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)
The same problem!
(gdb) run
Starting program:
/net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) set foop = foo32
(gdb) advance foo32
foo32 () at foobar.c:14
14 }
(gdb) disassemble
Dump of assembler code for function foo32:
=> 0x00400684 <+0>: jr ra
0x00400688 <+4>: li v0,3
End of assembler dump.
(gdb) finish
Run till exit from #0 foo32 () at foobar.c:14
main () at foobar.c:24
24 }
Value returned is $14 = 3
(gdb) continue
Continuing.
[Inferior 1 (process 14113) exited with code 03]
(gdb)
That did work though, so it's the ISA bit only!
(gdb) quit
Enough!
That's the tip of the iceberg only though. So let's rebuild the
executable with some dynamic symbols:
$ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c
$ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 32 entries:
6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar
8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p
9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop
15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32
17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo
25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi
Symbol table '.symtab' contains 95 entries:
55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c
69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar
71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p
72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop
79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32
81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo
89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi
$
OK, now the ISA bit is there for a change, but the MIPS16 `st_other'
attribute gone, hmm... What does `objdump' do then:
$ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar'
foobar-dyn: file format elf32-tradbigmips
SYMBOL TABLE:
00000000 l df *ABS* 00000000 foobar.c
004009cc g F .text 00000004 0xf0 bar
00410b88 g O .data 00000004 foo32p
00410b84 g O .data 00000004 foop
004009c4 g F .text 00000008 foo32
004009c0 g F .text 00000004 0xf0 foo
00410b80 g O .data 00000004 fooi
DYNAMIC SYMBOL TABLE:
004009cc g DF .text 00000004 Base 0xf0 bar
00410b88 g DO .data 00000004 Base foo32p
00410b84 g DO .data 00000004 Base foop
004009c4 g DF .text 00000008 Base foo32
004009c0 g DF .text 00000004 Base 0xf0 foo
00410b80 g DO .data 00000004 Base fooi
$
Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone
again.
Let's have a look at some DWARF-2 records GDB uses (I'll be stripping
off a lot here for brevity) -- debug info:
$ mips-linux-gnu-readelf -wi foobar
Contents of the .debug_info section:
[...]
Compilation Unit @ offset 0x88:
Length: 0xbb (32-bit)
Version: 4
Abbrev Offset: 62
Pointer Size: 4
<0><93>: Abbrev Number: 1 (DW_TAG_compile_unit)
<94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2
<98> DW_AT_language : 1 (ANSI C)
<99> DW_AT_name : (indirect string, offset: 0x190): foobar.c
<9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...]
<a1> DW_AT_ranges : 0x0
<a5> DW_AT_low_pc : 0x0
<a9> DW_AT_stmt_list : 0x27
<1><ad>: Abbrev Number: 2 (DW_TAG_subprogram)
<ae> DW_AT_external : 1
<ae> DW_AT_name : foo
<b2> DW_AT_decl_file : 1
<b3> DW_AT_decl_line : 1
<b4> DW_AT_prototyped : 1
<b4> DW_AT_type : <0xc2>
<b8> DW_AT_low_pc : 0x400680
<bc> DW_AT_high_pc : 0x400684
<c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<c2> DW_AT_GNU_all_call_sites: 1
<1><c2>: Abbrev Number: 3 (DW_TAG_base_type)
<c3> DW_AT_byte_size : 4
<c4> DW_AT_encoding : 5 (signed)
<c5> DW_AT_name : int
<1><c9>: Abbrev Number: 4 (DW_TAG_subprogram)
<ca> DW_AT_external : 1
<ca> DW_AT_name : (indirect string, offset: 0x18a): foo32
<ce> DW_AT_decl_file : 1
<cf> DW_AT_decl_line : 11
<d0> DW_AT_prototyped : 1
<d0> DW_AT_type : <0xc2>
<d4> DW_AT_low_pc : 0x400684
<d8> DW_AT_high_pc : 0x40068c
<dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<de> DW_AT_GNU_all_call_sites: 1
<1><de>: Abbrev Number: 2 (DW_TAG_subprogram)
<df> DW_AT_external : 1
<df> DW_AT_name : bar
<e3> DW_AT_decl_file : 1
<e4> DW_AT_decl_line : 6
<e5> DW_AT_prototyped : 1
<e5> DW_AT_type : <0xc2>
<e9> DW_AT_low_pc : 0x40068c
<ed> DW_AT_high_pc : 0x400690
<f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<f3> DW_AT_GNU_all_call_sites: 1
<1><f3>: Abbrev Number: 5 (DW_TAG_subprogram)
<f4> DW_AT_external : 1
<f4> DW_AT_name : (indirect string, offset: 0x199): main
<f8> DW_AT_decl_file : 1
<f9> DW_AT_decl_line : 21
<fa> DW_AT_prototyped : 1
<fa> DW_AT_type : <0xc2>
<fe> DW_AT_low_pc : 0x400490
<102> DW_AT_high_pc : 0x4004a4
<106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<108> DW_AT_GNU_all_tail_call_sites: 1
[...]
$
-- no sign of the ISA bit anywhere -- frame info:
$ mips-linux-gnu-readelf -wf foobar
[...]
Contents of the .debug_frame section:
00000000 0000000c ffffffff CIE
Version: 1
Augmentation: ""
Code alignment factor: 1
Data alignment factor: -4
Return address column: 31
DW_CFA_def_cfa_register: r29
DW_CFA_nop
00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684
00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c
00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690
00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4
DW_CFA_advance_loc: 6 to 00400496
DW_CFA_def_cfa_offset: 32
DW_CFA_offset: r31 at cfa-4
DW_CFA_advance_loc: 6 to 0040049c
DW_CFA_restore: r31
DW_CFA_def_cfa_offset: 0
DW_CFA_nop
DW_CFA_nop
DW_CFA_nop
[...]
$
-- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange):
$ mips-linux-gnu-readelf -wR foobar
Contents of the .debug_ranges section:
Offset Begin End
00000000 00400680 00400690
00000000 00400490 004004a4
00000000 <End of list>
$
-- no sign of the ISA bit anywhere -- line info:
$ mips-linux-gnu-readelf -wl foobar
Raw dump of debug contents of section .debug_line:
[...]
Offset: 0x27
Length: 78
DWARF Version: 2
Prologue Length: 31
Minimum Instruction Length: 1
Initial value of 'is_stmt': 1
Line Base: -5
Line Range: 14
Opcode Base: 13
Opcodes:
Opcode 1 has 0 args
Opcode 2 has 1 args
Opcode 3 has 1 args
Opcode 4 has 1 args
Opcode 5 has 1 args
Opcode 6 has 0 args
Opcode 7 has 0 args
Opcode 8 has 0 args
Opcode 9 has 1 args
Opcode 10 has 0 args
Opcode 11 has 0 args
Opcode 12 has 1 args
The Directory Table is empty.
The File Name Table:
Entry Dir Time Size Name
1 0 0 0 foobar.c
Line Number Statements:
Extended opcode 2: set Address to 0x400681
Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2
Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4
Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12
Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14
Advance Line by -7 to 7
Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7
Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9
Advance PC by 3 to 0x400690
Extended opcode 1: End of Sequence
Extended opcode 2: set Address to 0x400491
Advance Line by 21 to 22
Copy
Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23
Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22
Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23
Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24
Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23
Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24
Advance PC by 7 to 0x4004a4
Extended opcode 1: End of Sequence
[...]
-- a-ha, the ISA bit is there! However it's not always right for some
reason, I don't have a small test case to show it, but here's an excerpt
from MIPS16 libc, a prologue of a function:
00019630 <__libc_init_first>:
19630: e8a0 jrc ra
19632: 6500 nop
00019634 <_init>:
19634: f000 6a11 li v0,17
19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54>
1963c: f400 3240 sll v0,16
19640: e269 addu v0,v1
19642: 659a move gp,v0
19644: 64f6 save 48,ra,s0-s1
19646: 671c move s0,gp
19648: d204 sw v0,16(sp)
1964a: f352 984c lw v0,-27828(s0)
1964e: 6724 move s1,a0
and the corresponding DWARF-2 line info:
Line Number Statements:
Extended opcode 2: set Address to 0x19631
Advance Line by 44 to 45
Copy
Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48
Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53
Advance PC by constant 17 to 0x19646
Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59
Advance Line by -6 to 53
Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53
Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59
Advance Line by -6 to 53
Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53
-- see that "Advance PC by constant 17" there? It clears the ISA bit,
however code at 0x19646 is not standard MIPS code at all. For some
reason the constant is always 17, I've never seen DW_LNS_const_add_pc
used with any other value -- is that a binutils bug or what?
3. Solution:
I think we should retain the value of the ISA bit in code references,
that is effectively treat them as cookies as they indeed are (although
trivially calculated) rather than raw memory byte addresses.
In a perfect world both the static symbol table and the respective
DWARF-2 records should be fixed to include the ISA bit in all the cases.
I think however that this is infeasible.
All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be
tracked down. This function is used by `elf_slurp_symbol_table' that in
turn is used by `bfd_canonicalize_symtab' and
`bfd_canonicalize_dynamic_symtab', which are public interfaces.
Similarly DWARF-2 records are used outside GDB, one notable if a bit
questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have
identified at least bits in `execute_cfa_program' and
`uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame',
that would need an update as they effectively flip the ISA bit freely;
see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h.
But there may be more places. Any change in how DWARF-2 records are
produced would require an update there and would cause compatibility
problems with libgcc.a binaries already distributed; given that this is
a static library a complex change involving function renames would
likely be required.
I propose therefore to accept the existing inconsistencies and deal with
them entirely within GDB. I have figured out that the ISA bit lost in
various places can still be recovered as long as we have symbol
information -- that'll have the `st_other' attribute correctly set to
one of standard MIPS/MIPS16/microMIPS encoding.
Here's the resulting change. It adds a couple of new `gdbarch' hooks,
one to update symbol information with the ISA bit lost in
`_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2
records as they're processed. The ISA bit is set in each address
handled according to information retrieved from the symbol table for the
symbol spanning the address if any; limits are adjusted based on the
address they point to related to the respective base address.
Additionally minimal symbol information has to be adjusted accordingly
in its gdbarch hook.
With these changes in place some complications with ISA bit juggling in
the PC that never fully worked can be removed from the MIPS backend.
Conversely, the generic dynamic linker event special breakpoint symbol
handler has to be updated to call the minimal symbol gdbarch hook to
record that the symbol is a MIPS16 or microMIPS address if applicable or
the breakpoint will be set at the wrong address and either fail to work
or cause SIGTRAPs (this is because the symbol is handled early on and
bypasses regular symbol processing).
4. Results obtained
The change fixes the example above -- to repeat only the crucial steps:
(gdb) break main
Breakpoint 1 at 0x400491: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) print foo
$1 = {int (void)} 0x400681 <foo>
(gdb) set foop = bar
(gdb) advance bar
bar () at foobar.c:9
9 }
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068d <+0>: jr ra
0x0040068f <+2>: li v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0 bar () at foobar.c:9
main () at foobar.c:24
24 }
Value returned is $2 = 2
(gdb) continue
Continuing.
[Inferior 1 (process 14128) exited with code 02]
(gdb)
-- excellent!
The change removes about 90 failures per MIPS16 multilib in mips-sde-elf
testing too, results for MIPS16 are now similar to that for standard
MIPS; microMIPS results are a bit worse because of host-I/O problems in
QEMU used instead of MIPSsim for microMIPS testing only:
=== gdb Summary ===
# of expected passes 14299
# of unexpected failures 187
# of expected failures 56
# of known failures 58
# of unresolved testcases 11
# of untested testcases 52
# of unsupported tests 174
MIPS16:
=== gdb Summary ===
# of expected passes 14298
# of unexpected failures 187
# of unexpected successes 2
# of expected failures 54
# of known failures 58
# of unresolved testcases 12
# of untested testcases 52
# of unsupported tests 174
microMIPS:
=== gdb Summary ===
# of expected passes 14149
# of unexpected failures 201
# of unexpected successes 2
# of expected failures 54
# of known failures 58
# of unresolved testcases 7
# of untested testcases 53
# of unsupported tests 175
2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
Maciej W. Rozycki <macro@mips.com>
Pedro Alves <pedro@codesourcery.com>
gdb/
* gdbarch.sh (elf_make_msymbol_special): Change type to `F',
remove `predefault' and `invalid_p' initializers.
(make_symbol_special): New architecture method.
(adjust_dwarf2_addr, adjust_dwarf2_line): Likewise.
(objfile, symbol): New declarations.
* arch-utils.h (default_elf_make_msymbol_special): Remove
prototype.
(default_make_symbol_special): New prototype.
(default_adjust_dwarf2_addr): Likewise.
(default_adjust_dwarf2_line): Likewise.
* mips-tdep.h (mips_unmake_compact_addr): New prototype.
* arch-utils.c (default_elf_make_msymbol_special): Remove
function.
(default_make_symbol_special): New function.
(default_adjust_dwarf2_addr): Likewise.
(default_adjust_dwarf2_line): Likewise.
* dwarf2-frame.c (decode_frame_entry_1): Call
`gdbarch_adjust_dwarf2_addr'.
* dwarf2loc.c (dwarf2_find_location_expression): Likewise.
* dwarf2read.c (create_addrmap_from_index): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(add_partial_symbol): Likewise.
(add_partial_subprogram): Likewise.
(process_full_comp_unit): Likewise.
(read_file_scope): Likewise.
(read_func_scope): Likewise. Call `gdbarch_make_symbol_special'.
(read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'.
(read_call_site_scope): Likewise.
(dwarf2_ranges_read): Likewise.
(dwarf2_record_block_ranges): Likewise.
(read_attribute_value): Likewise.
(dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'.
(new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'.
* elfread.c (elf_symtab_read): Don't call
`gdbarch_elf_make_msymbol_special' if unset.
* mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip
the ISA bit from the PC.
* mips-tdep.c (mips_unmake_compact_addr): New function.
(mips_elf_make_msymbol_special): Set the ISA bit in the symbol's
address appropriately.
(mips_make_symbol_special): New function.
(mips_pc_is_mips): Set the ISA bit before symbol lookup.
(mips_pc_is_mips16): Likewise.
(mips_pc_is_micromips): Likewise.
(mips_pc_isa): Likewise.
(mips_adjust_dwarf2_addr): New function.
(mips_adjust_dwarf2_line): Likewise.
(mips_read_pc, mips_unwind_pc): Keep the ISA bit.
(mips_addr_bits_remove): Likewise.
(mips_skip_trampoline_code): Likewise.
(mips_write_pc): Don't set the ISA bit.
(mips_eabi_push_dummy_call): Likewise.
(mips_o64_push_dummy_call): Likewise.
(mips_gdbarch_init): Install `mips_make_symbol_special',
`mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch
handlers.
* solib.c (gdb_bfd_lookup_symbol_from_symtab): Get
target-specific symbol address adjustments.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
gdb/testsuite/
* gdb.base/func-ptrs.c: New file.
* gdb.base/func-ptrs.exp: New file.
During armv7b testing gdb.base/store.exp test was failling with
'GDB internal error' with the following message:
Temporary breakpoint 1, wack_double (u=
../../binutils-gdb/gdb/regcache.c:177: internal-error: register_size: Assertion `regnum >= 0 && regnum < (gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch))' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
It turns out that compiler generated DWARF with non-existent
register numbers. The compiler issue is present in both little endian
(armv7) and big endian (armv7b) (it is separate issue). Here is
example for one of formal parameters of wack_double function:
<2><792>: Abbrev Number: 10 (DW_TAG_formal_parameter)
<793> DW_AT_name : u
<795> DW_AT_decl_file : 1
<796> DW_AT_decl_line : 115
<797> DW_AT_type : <0x57c>
<79b> DW_AT_location : 6 byte block: 6d 93 4 6c 93 4 (DW_OP_reg29 (r29); DW_OP_piece: 4; DW_OP_reg28 (r28); DW_OP_piece: 4)
In both big and little endian cases gdbarch_dwarf2_reg_to_regnum
returns -1 which is stored into gdb_regnum. But it causes severe
problem only in big endian case because in read_pieced_value and
write_pieced_value functions BFD_ENDIAN_BIG related processing
happen regardless of gdb_regnum value, for example register_size
function is called and in case of gdb_regnum=-1, it cause
'GDB internal error' and crash.
Solution is to move BFD_ENDIAN_BIG related processing under
(gdb_regnum != -1) branch of processing.
gdb/ChangeLog:
2014-11-02 Victor Kamensky <victor.kamensky@linaro.org>
* dwarf2loc.c (read_pieced_value): Do big endian
processing only if gdb_regnum is not -1.
(write_pieced_value): Ditto.
This fixes PR symtab/14604, PR symtab/14605, and Jan's test at
https://sourceware.org/ml/gdb-patches/2014-07/msg00158.html, in a tree
with bddbbed reverted:
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
The PRs are about variables described by the DWARF as being split over
multiple registers using DWARF piece information, but some of those
registers being marked as optimised out (not saved) by a later frame.
GDB currently incorrectly mishandles these partially-optimized-out
values.
Even though we can usually tell from the debug info whether a local or
global is optimized out, handling the case of a local living in a
register that was not saved in a frame requires fetching the variable.
GDB also needs to fetch a value to tell whether parts of it are
"<unavailable>". Given this, it's not worth it to try to avoid
fetching lazy optimized-out values based on debug info alone.
So this patch makes GDB track which chunks of a value's contents are
optimized out like it tracks <unavailable> contents. That is, it
makes value->optimized_out be a bit range vector instead of a boolean,
and removes the struct lval_funcs check_validity and check_any_valid
hooks.
Unlike Andrew's series which this is based on (at
https://sourceware.org/ml/gdb-patches/2013-08/msg00300.html, note some
pieces have gone in since), this doesn't merge optimized out and
unavailable contents validity/availability behind a single interface,
nor does it merge the bit range vectors themselves (at least yet).
While it may be desirable to have a single entry point that returns
existence of contents irrespective of what may make them
invalid/unavailable, several places want to treat optimized out /
unavailable / etc. differently, so each spot that potentially could
use it will need to be careful considered on case-by-case basis, and
best done as a separate change.
This fixes Jan's test, because value_available_contents_eq wasn't
considering optimized out value contents. It does now, and because of
that it's been renamed to value_contents_eq.
A new intro comment is added to value.h describing "<optimized out>",
"<not saved>" and "<unavailable>" values.
gdb/
PR symtab/14604
PR symtab/14605
* ada-lang.c (coerce_unspec_val_to_type): Use
value_contents_copy_raw.
* ada-valprint.c (val_print_packed_array_elements): Adjust.
* c-valprint.c (c_val_print): Use value_bits_any_optimized_out.
* cp-valprint.c (cp_print_value_fields): Let the common printing
code handle optimized out values.
(cp_print_value_fields_rtti): Use value_bits_any_optimized_out.
* d-valprint.c (dynamic_array_type): Use
value_bits_any_optimized_out.
* dwarf2loc.c (entry_data_value_funcs): Remove check_validity and
check_any_valid fields.
(check_pieced_value_bits): Delete and inline ...
(check_pieced_synthetic_pointer): ... here.
(check_pieced_value_validity): Delete.
(check_pieced_value_invalid): Delete.
(pieced_value_funcs): Remove check_validity and check_any_valid
fields.
(read_pieced_value): Use mark_value_bits_optimized_out.
(write_pieced_value): Switch to use
mark_value_bytes_optimized_out.
(dwarf2_evaluate_loc_desc_full): Copy the value contents instead
of assuming the whole value is optimized out.
* findvar.c (read_frame_register_value): Remove special handling
of optimized out registers.
(value_from_register): Use mark_value_bytes_optimized_out.
* frame-unwind.c (frame_unwind_got_optimized): Use
mark_value_bytes_optimized_out.
* jv-valprint.c (java_value_print): Adjust.
(java_print_value_fields): Let the common printing code handle
optimized out values.
* mips-tdep.c (mips_print_register): Remove special handling of
optimized out registers.
* opencl-lang.c (lval_func_check_validity): Delete.
(lval_func_check_any_valid): Delete.
(opencl_value_funcs): Remove check_validity and check_any_valid
fields.
* p-valprint.c (pascal_object_print_value_fields): Let the common
printing code handle optimized out values.
* stack.c (read_frame_arg): Remove special handling of optimized
out values. Fetch both VAL and ENTRYVAL before comparing
contents. Adjust to value_available_contents_eq rename.
* valprint.c (valprint_check_validity)
(val_print_scalar_formatted): Use value_bits_any_optimized_out.
(val_print_array_elements): Adjust.
* value.c (struct value) <optimized_out>: Now a VEC(range_s).
(value_bits_any_optimized_out): New function.
(value_entirely_covered_by_range_vector): New function, factored
out from value_entirely_unavailable.
(value_entirely_unavailable): Reimplement.
(value_entirely_optimized_out): New function.
(insert_into_bit_range_vector): New function, factored out from
mark_value_bits_unavailable.
(mark_value_bits_unavailable): Reimplement.
(struct ranges_and_idx): New struct.
(find_first_range_overlap_and_match): New function, factored out
from value_available_contents_bits_eq.
(value_available_contents_bits_eq): Rename to ...
(value_contents_bits_eq): ... this. Check both unavailable
contents and optimized out contents.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this.
(allocate_value_lazy): Remove reference to the old optimized_out
boolean.
(allocate_optimized_out_value): Use
mark_value_bytes_optimized_out.
(require_not_optimized_out): Adjust to check whether the
optimized_out vec is empty.
(ranges_copy_adjusted): New function, factored out from
value_contents_copy_raw.
(value_contents_copy_raw): Also copy the optimized out ranges.
Assert the destination ranges aren't optimized out.
(value_contents_copy): Update comment, remove call to
require_not_optimized_out.
(value_contents_equal): Adjust to check whether the optimized_out
vec is empty.
(set_value_optimized_out, value_optimized_out_const): Delete.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New functions.
(value_entirely_optimized_out, value_bits_valid): Delete.
(value_copy): Take a VEC copy of the 'optimized_out' field.
(value_primitive_field): Remove special handling of optimized out.
(value_fetch_lazy): Assert that lazy values have no unavailable
regions. Use value_bits_any_optimized_out. Remove some special
handling for optimized out values.
* value.h: Add intro comment about <optimized out> and
<unavailable>.
(struct lval_funcs): Remove check_validity and check_any_valid
fields.
(set_value_optimized_out, value_optimized_out_const): Remove.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New declarations.
(value_bits_any_optimized_out): New declaration.
(value_bits_valid): Delete declaration.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this, and extend comments.
gdb/testsuite/
PR symtab/14604
PR symtab/14605
* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
gdb_test.
I cannot reproduce any wrong case having the code removed.
I just do not find it correct to have it disabled. But at the same time I do
like much / I do not find correct the code myself. It is a bit problematic to
have struct value describing a memory content which is no longer present
there.
What happens there:
------------------------------------------------------------------------------
volatile int vv;
static __attribute__((noinline)) int
bar (int &ref) {
ref = 20;
vv++; /* break-here */
return ref;
}
int main (void) {
int var = 10;
return bar (var);
}
------------------------------------------------------------------------------
<4><c7>: Abbrev Number: 13 (DW_TAG_GNU_call_site_parameter)
<c8> DW_AT_location : 1 byte block: 55 (DW_OP_reg5 (rdi))
<ca> DW_AT_GNU_call_site_value: 2 byte block: 91 74 (DW_OP_fbreg: -12)
<cd> DW_AT_GNU_call_site_data_value: 1 byte block: 3a (DW_OP_lit10)
------------------------------------------------------------------------------
gdb -ex 'b value_addr' -ex r --args ../gdb ./1 -ex 'watch vv' -ex r -ex 'p &ref@entry'
->
6 return ref;
bar (ref=@0x7fffffffd944: 20, ref@entry=@0x7fffffffd944: 10) at 1.C:25
------------------------------------------------------------------------------
At /* break-here */ struct value variable 'ref' is TYPE_CODE_REF.
With FSF GDB HEAD:
(gdb) x/gx arg1.contents
0x6004000a4ad0: 0x00007fffffffd944
(gdb) p ((struct value *)arg1.location.computed.closure).lval
$1 = lval_memory
(gdb) p/x ((struct value *)arg1.location.computed.closure).location.address
$3 = 0x7fffffffd944
With your #if0-ed code:
(gdb) x/gx arg1.contents
0x6004000a4ad0: 0x00007fffffffd944
(gdb) p ((struct value *)arg1.location.computed.closure).lval
$8 = not_lval
(gdb) p/x ((struct value *)arg1.location.computed.closure).location.address
$9 = 0x0
I do not see how to access
((struct value *)arg1.location.computed.closure).location.address
from GDB CLI. Trying
(gdb) p &ref@entry
will invoke value_addr()'s:
if (TYPE_CODE (type) == TYPE_CODE_REF)
/* Copy the value, but change the type from (T&) to (T*). We
keep the same location information, which is efficient, and
allows &(&X) to get the location containing the reference. */
and therefore the address gets fetched already from
arg1.contents
and not from
((struct value *)arg1.location.computed.closure).location.address
.
And for any other type than TYPE_CODE_REF this code you removed does not get
executed at all. This DW_AT_GNU_call_site_data_value DWARF was meant
primarily for Fortran but with -O0 entry values do not get produced
and with -Og and higher Fortran always optimizes out the passing by reference.
If you do not like the removed code there I am OK with removing it as I do not
know how to make it's use reproducible for user anyway. In the worst case
- if there really is some way how to exploit it - one should just get
Attempt to take address of value not located in memory.
instead of some wrong value and it may be easy to fix then.
gdb/
2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2loc.c (value_of_dwarf_reg_entry): Remove setting value address
for reference entry value target data value.
Message-ID: <20140720150727.GA18488@host2.jankratochvil.net>
This patch fixes a problem that prevented use of the Dwarf unwinders on SPU,
because dwarf2-frame.c common code did not support the situation where the
stack and/or frame pointer is maintained in a *vector* register. This is
because read_addr_from_reg is hard-coded to assume that such pointers can
be read from registers via a simple get_frame_register / unpack_pointer
operation.
Now, there *is* a routine address_from_register that calls into the
appropriate tdep routines to handle pointer values in "weird" registers
like on SPU, but it turns out I cannot simply change dwarf2-frame.c to
use address_from_register. This is because address_from_register uses
value_from_register to create a (temporary) value, and that routine
at some point calls get_frame_id in order to set up that value's
VALUE_FRAME_ID entry.
However, the dwarf2-frame.c read_addr_from_reg routine will be called
during early unwinding (to unwind the frame's CFA), at which point the
frame's ID is not actually known yet! This would cause an assert.
On the other hand, we may notice that VALUE_FRAME_ID is only needed in the
value returned by value_from_register if that value is later used as an
lvalue. But this is obviously never done to the temporary value used in
address_from_register. So, if we could change address_from_register to
not call value_from_register but instead accept constructing a value
that doesn't have VALUE_FRAME_ID set, things should be fine.
To do that, we can change the value_from_register callback to accept
a FRAME_ID instead of a FRAME; the only existing uses of the FRAME
argument were either to extract its frame ID, or its gdbarch. (To
keep a way of getting at the latter, we also change the callback's
type from "f" to "m".) Together with the required follow-on changes
in the existing value_from_register implementations (including the
default one), this seems to fix the problem.
As another minor interface cleanup, I've removed the explicit TYPE
argument from address_from_register. This routine really always
uses a default pointer type, and in the new implementation it -to
some extent- relies on that fact, in that it will now no longer
handle types that require gdbarch_convert_register_p handling.
gdb:
2014-04-17 Ulrich Weigand <uweigand@de.ibm.com>
* gdbarch.sh (value_from_register): Make class "m" instead of "f".
Replace FRAME argument with FRAME_ID.
* gdbarch.c, gdbarch.h: Regenerate.
* findvar.c (default_value_from_register): Add GDBARCH argument;
replace FRAME by FRAME_ID. No longer call get_frame_id.
(value_from_register): Update call to gdbarch_value_from_register.
* value.h (default_value_from_register): Update prototype.
* s390-linux-tdep.c (s390_value_from_register): Update interface
and call to default_value_from_register.
* spu-tdep.c (spu_value_from_register): Likewise.
* findvar.c (address_from_register): Remove TYPE argument.
Do not call value_from_register; use gdbarch_value_from_register
with null_frame_id instead.
* value.h (address_from_register): Update prototype.
* dwarf2-frame.c (read_addr_from_reg): Use address_from_register.
* dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for
address_from_register interface change.
The dwarf standard allow certain attributes to be expressed as dwarf
expressions rather than constants. For instance upper-/lowerbound attributes.
In case of a c99 variable length array the upperbound is a dynamic attribute.
With this change c99 vla behave the same as with static arrays.
1| void foo (size_t n) {
2| int ary[n];
3| memset(ary, 0, sizeof(ary));
4| }
(gdb) print ary
$1 = {0 <repeats 42 times>}
gdb/ChangeLog:
* dwarf2loc.c (dwarf2_locexpr_baton_eval): New function.
(dwarf2_evaluate_property): New function.
* dwarf2loc.h (dwarf2_evaluate_property): New function prototype.
* dwarf2read.c (attr_to_dynamic_prop): New function.
(read_subrange_type): Use attr_to_dynamic_prop to read high bound
attribute.
* gdbtypes.c: Include dwarf2loc.h.
(is_dynamic_type): New function.
(resolve_dynamic_type): New function.
(resolve_dynamic_bounds): New function.
(get_type_length): New function.
(check_typedef): Use get_type_length to compute type length.
* gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro.
(TYPE_LOW_BOUND_KIND): New macro.
(is_dynamic_type): New function prototype.
* value.c (value_from_contents_and_address): Call resolve_dynamic_type
to resolve dynamic properties of the type. Update comment.
* valops.c (get_value_at, value_at, value_at_lazy): Update comment.
This reverts the following patch series, as they cause some regresssions.
commit 37c1ab67a3
type: add c99 variable length array support
gdb/
* dwarf2loc.c (dwarf2_locexpr_baton_eval): New function.
(dwarf2_evaluate_property): New function.
* dwarf2loc.h (dwarf2_evaluate_property): New function prototype.
* dwarf2read.c (attr_to_dynamic_prop): New function.
(read_subrange_type): Use attr_to_dynamic_prop to read high bound
attribute.
* gdbtypes.c: Include dwarf2loc.h.
(is_dynamic_type): New function.
(resolve_dynamic_type): New function.
(resolve_dynamic_bounds): New function.
(get_type_length): New function.
(check_typedef): Use get_type_length to compute type length.
* gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro.
(TYPE_LOW_BOUND_KIND): New macro.
(is_dynamic_type): New function prototype.
* value.c (value_from_contents_and_address): Call resolve_dynamic_type
to resolve dynamic properties of the type. Update comment.
* valops.c (get_value_at, value_at, value_at_lazy): Update comment.
commit 26cb189f8b
vla: enable sizeof operator to work with variable length arrays
gdb/
* eval.c (evaluate_subexp_for_sizeof) <OP_VAR_VALUE>: If the type
passed to sizeof is dynamic evaluate the argument to compute the length.
commit 04b19544ef
vla: enable sizeof operator for indirection
gdb/
* eval.c (evaluate_subexp_for_sizeof) <UNOP_IND>: Create an indirect
value and retrieve the dynamic type size.
commit bcd629a44f
vla: update type from newly created value
gdb/
* ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from value.
(ada_template_to_fixed_record_type_1): Likewise.
(ada_to_fixed_type_1): Likewise.
* cp-valprint.c (cp_print_value_fields_rtti): Likewise.
(cp_print_value): Likewise.
* d-valprint.c (dynamic_array_type): Likewise.
* eval.c (evaluate_subexp_with_coercion): Likewise.
* findvar.c (address_of_variable): Likewise.
* jv-valprint.c (java_value_print): Likewise.
* valops.c (value_ind): Likewise.
* value.c (coerce_ref): Likewise.
commit b86138fb04
vla: print "variable length" for unresolved dynamic bounds
gdb/
* c-typeprint.c (c_type_print_varspec_suffix): Added
check for not yet resolved high bound. If unresolved, print
"variable length" string to the console instead of random
length.
commit e1969afbd4
vla: support for DW_AT_count
gdb/
* dwarf2read.c (read_subrange_type): Convert DW_AT_count to a dynamic
property and store it as the high bound and flag the range accordingly.
* gdbtypes.c (resolve_dynamic_bounds): If range is flagged as
RANGE_UPPER_BOUND_IS_COUNT assign low + high - 1 as the new high bound.
* gdbtypes.h (enum range_flags): New enum.
(struct range_bounds): Add flags member.
commit 92b09522dc
vla: resolve dynamic bounds if value contents is a constant byte-sequence
gdb/
* findvar.c (default_read_var_value): Resolve dynamic bounds if location
points to a constant blob.
commit 3bce82377f
vla: evaluate operand of sizeof if its type is a vla
gdb/
* eval.c (evaluate_subexp_for_sizeof): Add enum noside argument.
(evaluate_subexp_standard): Pass noside argument.
(evaluate_subexp_for_sizeof) <BINOP_SUBSCRIPT>: Handle subscript case
if noside equals EVAL_NORMAL. If the subscript yields a vla type
re-evaluate subscript operation with EVAL_NORMAL to enable sideffects.
* gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated.
* gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case.
gdb/testsuite
* gdb.base/vla-sideeffect.c: New file.
* gdb.base/vla-sideeffect.exp: New file.
commit 504f34326e
test: cover subranges with present DW_AT_count attribute
gdb/testsuite/
* gdb.dwarf2/count.exp: New file.
commit 1a237e0ee5
test: multi-dimensional c99 vla.
gdb/testsuite/
* gdb.base/vla-multi.c: New file.
* gdb.base/vla-multi.exp: New file.
commit 024e13b46f
test: evaluate pointers to C99 vla correctly.
gdb/testsuite/
* gdb.base/vla-ptr.c: New file.
* gdb.base/vla-ptr.exp: New file.
commit c8655f75e2
test: basic c99 vla tests for C primitives
gdb/testsuite/
* gdb.base/vla-datatypes.c: New file.
* gdb.base/vla-datatypes.exp: New file.
commit 58a84dcf29
test: add mi vla test
gdb/testsuite/
* gdb.mi/mi-vla-c99.exp: New file.
* gdb.mi/vla.c: New file.
The dwarf standard allow certain attributes to be expressed as dwarf
expressions rather than constants. For instance upper-/lowerbound attributes.
In case of a c99 variable length array the upperbound is a dynamic attribute.
With this change c99 vla behave the same as with static arrays.
1| void foo (size_t n) {
2| int ary[n];
3| memset(ary, 0, sizeof(ary));
4| }
(gdb) print ary
$1 = {0 <repeats 42 times>}
* dwarf2loc.c (dwarf2_locexpr_baton_eval): New function.
(dwarf2_evaluate_property): New function.
* dwarf2loc.h (dwarf2_evaluate_property): New function prototype.
* dwarf2read.c (attr_to_dynamic_prop): New function.
(read_subrange_type): Use attr_to_dynamic_prop to read high bound
attribute.
* gdbtypes.c: Include dwarf2loc.h.
(is_dynamic_type): New function.
(resolve_dynamic_type): New function.
(resolve_dynamic_bounds): New function.
(get_type_length): New function.
(check_typedef): Use get_type_length to compute type length.
* gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro.
(TYPE_LOW_BOUND_KIND): New macro.
(is_dynamic_type): New function prototype.
* value.c (value_from_contents_and_address): Call resolve_dynamic_type
to resolve dynamic properties of the type. Update comment.
* valops.c (get_value_at, value_at, value_at_lazy): Update comment.
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
https://sourceware.org/ml/gdb-patches/2013-12/msg00144.html
The vector of unavailable parts of a value is currently byte based. Given
that we can model a value down to the bit level, we can potentially loose
information with the current implementation. After this patch we model the
unavailable information in bits.
gdb/ChangeLog
* dwarf2loc.c (read_pieced_value): Mark bits, not bytes
unavailable, use correct bit length.
* value.c (struct value): Extend comment on unavailable to
indicate that it is bit based.
(value_bits_available): New function.
(value_bytes_available): Call value_bits_available.
(value_entirely_available): Check against the bit length, not byte
length.
(mark_value_bits_unavailable): New function.
(mark_value_bytes_unavailable): Move contents to
mark_value_bits_unavailable, call to same.
(memcmp_with_bit_offsets): New function.
(value_available_contents_bits_eq): New function, takes the
functionality from value_available_contents_eq but uses
memcmp_with_bit_offsets now, and is bit not byte based.
(value_available_contents_eq): Move implementation into
value_available_contents_bits_eq, call to same.
(value_contents_copy_raw): Work on bits, not bytes.
(unpack_value_bits_as_long_1): Check availability in bits, not
bytes.
* value.h (value_bits_available): Declare new function.
(mark_value_bits_unavailable): Declare new function.
gdb/testsuite/ChangeLog
* gdb.trace/unavailable-dwarf-piece.c: New file.
* gdb.trace/unavailable-dwarf-piece.exp: New file.
In order to catch <optimized out> errors like we catch <unavailable>
errors, this adds a new OPTIMIZED_OUT_ERROR error code, and throws it
in various places.
gdb/ChangeLog
2013-12-06 Andrew Burgess <aburgess@broadcom.com>
Pedro Alves <palves@redhat.com>
* exceptions.h (errors): Add OPTIMIZED_OUT_ERROR.
* dwarf2loc.c (write_pieced_value): Throw OPTIMIZED_OUT_ERROR.
* frame.c (frame_unwind_register): Throw OPTIMIZED_OUT_ERROR.
* spu-tdep.c (spu_software_single_step): Throw
OPTIMIZED_OUT_ERROR.
* valops.c (value_assign): Throw OPTIMIZED_OUT_ERROR.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This is to help make it slightly clearer how this method is expected
to extract data from the given register.
gdb/ChangeLog:
* dwarf2expr.h (struct dwarf_expr_context_funcs)
<read_addr_from_reg>: Renames "read_reg".
* dwarf2-frame.c (read_addr_from_reg): Renames "read_reg".
Adjust comment.
(dwarf2_frame_ctx_funcs, execute_stack_op, dwarf2_frame_cache):
Use read_addr_from_reg in place of read_reg.
* dwarf2expr.c (execute_stack_op): Use read_addr_from_reg
in place of read_reg.
* dwarf2loc.c (dwarf_expr_read_addr_from_reg): Renames
dwarf_expr_read_reg.
(dwarf_expr_ctx_funcs): Replace dwarf_expr_read_reg
with dwarf_expr_read_addr_from_reg.
(needs_frame_read_addr_from_reg): Renames needs_frame_read_reg.
(needs_frame_ctx_funcs): Replace needs_frame_read_reg with
needs_frame_read_addr_from_reg.
Similar to qsort(), the glibc version of memcpy() also declares its
arguments with __attribute__(__nonnull__(...)). If NULL is passed
anyway, upstream GCC's new pass '-fisolate-erroneous-paths' typically
causes a trap in such cases. I've encountered this with GDB in
chain_candidate() when trying to execute the break.exp test case.
gdb/
2013-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* dwarf2loc.c (chain_candidate): Prevent invoking memcpy with
NULL.
Consider the following code, compiled at -O2 on ppc-linux:
procedure Increment (Val : in out Float; Msg : String);
The implementation does not really matter in this case). In our example,
this function is being called from a function with Param_1 set to 99.0.
Trying to break inside that function, and running until reaching that
breakpoint yields:
(gdb) b increment
Breakpoint 1 at 0x100014b4: file callee.adb, line 6.
(gdb) run
Starting program: /[...]/foo
Breakpoint 1, callee.increment (val=99.0, val@entry=0.0, msg=...)
at callee.adb:6
6 if Val > 200.0 then
The @entry value for parameter "val" is incorrect, it should be 99.0.
The associated call-site parameter DIE looks like this:
.uleb128 0xc # (DIE (0x115) DW_TAG_GNU_call_site_parameter)
.byte 0x2 # DW_AT_location
.byte 0x90 # DW_OP_regx
.uleb128 0x21
.byte 0x3 # DW_AT_GNU_call_site_value
.byte 0xf5 # DW_OP_GNU_regval_type
.uleb128 0x3f
.uleb128 0x25
The DW_AT_GNU_call_site_value uses a DW_OP_GNU_regval_type
operation, referencing register 0x3f=63, which is $f31,
an 8-byte floating register. In that register, the value is
stored using the usual 8-byte float format:
(gdb) info float
f31 99.0 (raw 0x4058c00000000000)
The current code evaluating DW_OP_GNU_regval_type operations
currently is (dwarf2expr.c:execute_stack_op):
result = (ctx->funcs->read_reg) (ctx->baton, reg);
result_val = value_from_ulongest (address_type, result);
result_val = value_from_contents (type,
value_contents_all (result_val));
What the ctx->funcs->read_reg function does is read the contents
of the register as if it contained an address. The rest of the code
continues that assumption, thinking it's OK to then use that to
create an address/ulongest struct value, which we then re-type
to the type specified by DW_OP_GNU_regval_type.
We're getting 0.0 above because the read_reg implementations
end up treating the contents of the FP register as an integral,
reading only 4 out of the 8 bytes. Being a big-endian target,
we read the high-order ones, which gives us zero.
This patch fixes the problem by introducing a new callback to
read the contents of a register as a given type, and then adjust
the handling of DW_OP_GNU_regval_type to use that new callback.
gdb/ChangeLog:
* dwarf2expr.h (struct dwarf_expr_context_funcs) <read_reg>:
Extend the documentation a bit.
<get_reg_value>: New field.
* dwarf2loc.c (dwarf_expr_get_reg_value)
(needs_frame_get_reg_value): New functions.
(dwarf_expr_ctx_funcs, needs_frame_ctx_funcs): Add "get_reg_value"
callback.
* dwarf2-frame.c (get_reg_value): New function.
(dwarf2_frame_ctx_funcs): Add "get_reg_value" callback.
* dwarf2expr.c (execute_stack_op) <DW_OP_GNU_regval_type>:
Use new callback to compute result_val.
gdb/testsuite/ChangeLog:
* gdb.ada/O2_float_param: New testcase.
Currently, in some scenarios, GDB prints <optimized out> when printing
outer frame registers. An <optimized out> register is a confusing
concept. What this really means is that the register is
call-clobbered, or IOW, not saved by the callee. This patch makes GDB
say that instead.
Before patch:
(gdb) p/x $rax $1 = <optimized out>
(gdb) info registers rax
rax <optimized out>
After patch:
(gdb) p/x $rax
$1 = <not saved>
(gdb) info registers rax
rax <not saved>
However, if for some reason the debug info describes a variable as
being in such a register (**), we still want to print <optimized out>
when printing the variable. IOW, <not saved> is reserved for
inspecting registers at the machine level. The patch uses
lval_register+optimized_out to encode the not saved registers, and
makes it so that optimized out variables always end up in
!lval_register values.
** See <https://sourceware.org/ml/gdb-patches/2012-08/msg00787.html>.
Current/recent enough GCC doesn't mark variables/arguments as being in
call-clobbered registers in the ranges corresponding to function
calls, while older GCCs did. Newer GCCs will just not say where the
variable is, so GDB will end up realizing the variable is optimized
out.
frame_unwind_got_optimized creates not_lval optimized out registers,
so by default, in most cases, we'll see <optimized out>.
value_of_register is the function eval.c uses for evaluating
OP_REGISTER (again, $pc, etc.), and related bits. It isn't used for
anything else. This function makes sure to return lval_register
values. The patch makes "info registers" and the MI equivalent use it
too. I think it just makes a lot of sense, as this makes it so that
when printing machine registers ($pc, etc.), we go through a central
function.
We're likely to need a different encoding at some point, if/when we
support partially saved registers. Even then, I think
value_of_register will still be the spot to tag the intention to print
machine register values differently.
value_from_register however may also return optimized out
lval_register values, so at a couple places where we're computing a
variable's location from a dwarf expression, we convert the resulting
value away from lval_register to a regular optimized out value.
Tested on x86_64 Fedora 17
gdb/
2013-10-02 Pedro Alves <palves@redhat.com>
* cp-valprint.c (cp_print_value_fields): Adjust calls to
val_print_optimized_out.
* jv-valprint.c (java_print_value_fields): Likewise.
* p-valprint.c (pascal_object_print_value_fields): Likewise.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full)
<DWARF_VALUE_REGISTER>: If the register was not saved, return a
new optimized out value.
* findvar.c (address_from_register): Likewise.
* frame.c (put_frame_register): Tweak error string to say the
register was not saved, rather than optimized out.
* infcmd.c (default_print_one_register_info): Adjust call to
val_print_optimized_out. Use value_of_register instead of
get_frame_register_value.
* mi/mi-main.c (output_register): Use value_of_register instead of
get_frame_register_value.
* valprint.c (valprint_check_validity): Likewise.
(val_print_optimized_out): New value parameter. If the value is
lval_register, print <not saved> instead.
(value_check_printable, val_print_scalar_formatted): Adjust calls
to val_print_optimized_out.
* valprint.h (val_print_optimized_out): New value parameter.
* value.c (struct value) <optimized_out>: Extend comment.
(error_value_optimized_out): New function.
(require_not_optimized_out): Use it. Use a different string for
lval_register values.
* value.h (error_value_optimized_out): New declaration.
* NEWS: Mention <not saved>.
gdb/testsuite/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-reg-undefined.exp <pattern_rax_rbx_rcx_print,
pattern_rax_rbx_rcx_info>: Set to "<not saved>".
* gdb.mi/mi-reg-undefined.exp (opt_out_pattern): Delete.
(not_saved_pattern): New.
Replace use of the former with the latter.
gdb/doc/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Registers): Expand description of saved registers
in frames. Explain <not saved>.
A couple years ago, dwarf_expr_fetch used to return a CORE_ADDR. It
was made to return a ULONGEST since, and the 'dwarf_regnum' local
adjusted accordingly, but, we kept printing it with paddress.
gdbarch_dwarf2_reg_to_regnum takes the register number as 'int', so
there's really no point in using ULONGEST/pulongest either.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): 'dwarf_regnum'
local is now int instead of ULONGEST. Print it with %d
instead of paddress.
I came across a pattern used to construct a value in the following way:
struct value *val = allocate_value_lazy (type);
VALUE_LVAL (val) = lval_memory;
set_value_address (val, address);
Instead we fold the above call into:
value_at_lazy (type, addr);
2013-08-27 Sanimir Agovic <sanimir.agovic@intel.com>
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use value_at_lazy instead
of assembling value via allocate_value_lazy and attribute setter.
* findvar.c (default_read_var_value): Use value_at_lazy instead of
assembling value via allocate_value_lazy and attribute setter.
* valops.c (do_search_struct_field): Use value_at_lazy instead of
assembling value via allocate_value_lazy and attribute setter.
2013-06-26 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* ctf.c (ctf_traceframe_info): Push trace state variables
present in the trace data into the traceframe info object.
* breakpoint.c (DEF_VEC_I): Remove.
* common/filestuff.c (DEF_VEC_I): Likewise.
* dwarf2loc.c (DEF_VEC_I): Likewise.
* mi/mi-main.c (DEF_VEC_I): Likewise.
* common/gdb_vecs.h (DEF_VEC_I): Define vector for int.
* features/traceframe-info.dtd: Add tvar element and its
attributes.
* tracepoint.c (free_traceframe_info): Free vector 'tvars'.
(build_traceframe_info): Push trace state variables present in the
trace data into the traceframe info object.
(traceframe_info_start_tvar): New function.
(tvar_attributes): New.
(traceframe_info_children): Add "tvar" element.
* tracepoint.h (struct traceframe_info) <tvars>: New field.
* NEWS: Mention the change in GDB and GDBserver.
gdb/doc:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Traceframe Info Format): Document tvar element and
its attributes.
gdb/gdbserver:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* tracepoint.c (build_traceframe_info_xml): Output trace state
variables present in the trace buffer.
PR symtab/15391 is a failure with the DW_OP_GNU_implicit_pointer
feature.
I tracked it down to a logic error in read_pieced_value. The code
truncates this_size_bits according to the type size and offset too
early -- it should do it after taking bits_to_skip into account.
This patch fixes the bug.
While testing this, I also tripped across a latent bug because
indirect_pieced_value does not sign-extend where needed. This patch
fixes this bug as well.
Finally, Pedro pointed out that a previous version implemented sign
extension incorrectly. This version introduces a new gdb_sign_extend
function for this. A couple of notes on this function:
* It has the gdb_ prefix to avoid clashes with various libraries that
felt free to avoid proper namespacing. There is a "sign_extend"
function in a Tile GX header, in an SOM-related BFD header (and in
sh64-tdep.c and as a macro in arm-wince-tdep.c, but those are
ours...)
* I looked at all the sign extensions in gdb and didn't see ones that
I felt comfortable converting to use this function; in large part
because I don't have a good way to test the conversion.
Built and regtested on x86-64 Fedora 18. New test cases included;
this required a minor addition to the DWARF assembler. Note that the
DWARF CU made by implptrpiece.exp uses a funny pointer size in order
to show the sign-extension bug on all platforms.
* dwarf2loc.c (read_pieced_value): Truncate this_size_bits
after taking bits_to_skip into account. Sign extend byte_offset.
* utils.h (gdb_sign_extend): Declare.
* utils.c (gdb_sign_extend): New function.
* gdb.dwarf2/implptrpiece.exp: New file.
* gdb.dwarf2/implptrconst.exp (d): New variable.
Print d.
* lib/dwarf2.exp (Dwarf::_location): Handle DW_OP_piece.
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.