gdb/ChangeLog:
Back out the following change:
| 2010-06-29 Hui Zhu <teawater@gmail.com>
| * record.c (set_record_pic_cmdlist,
| show_record_pic_cmdlist): New variables.
| (set_record_pic_command,
| show_record_pic_command): New functions.
| (record_pic_function, record_pic_line, record_pic_enum,
| set_record_pic_type, record_pic_hide_nofunction,
| record_pic_hide_nosource, record_pic_hide_same): New variables.
| (record_pic_fputs): New function.
| (function_list, node_list, edge_list): New struct.
| (function_list, node_list, edge_list): New variables.
| (record_pic_cleanups, record_pic_node,
| record_pic_edge, cmd_record_pic): New functions.
| (_initialize_record): Add new commands for record pic.
(output_fde): Use it. Make sure to fully init exp before using it.
testsuite/
* gas/cfi/cfi-common-1.d: Use objdump instead of readelf to dump.
* gas/cfi/cfi-common-2.d, gas/cfi/cfi-common-3.d,
gas/cfi/cfi-common-4.d, gas/cfi/cfi-common-6.d,
gas/cfi/cfi-common-7.d, gas/cfi/cfi-x86_64.d: Likewise.
* gas/cfi/cfi-x86_64.s: Remove .type directives.
* gas/cfi/cfi.exp: Run for pecoff objects too.
* gas/cfi/reloc-pe-i386.d, gas/cfi/reloc-pe-i386.s: New test.
(init_dwarf_regnames): Use them.
* dwarf.h: Declare them.
* objdump.c (dump_dwarf): Use bfd_get_arch + bfd_get_mach to set up
the regnames, rather than using elf_machine_code.
* cli-logging.c: Include gdb_assert.h.
(set_logging_overwrite): New function.
(logging_redirect): New comment.
(logging_no_redirect_file, set_logging_redirect)
(pop_output_files) <logging_no_redirect_file>: New.
(handle_redirections) <!logging_redirect>: New variable
no_redirect_file. Remove file autoclose for tee_file_new. No longer
discard cleanup for the close of former OUTPUT. Set
LOGGING_NO_REDIRECT_FILE.
(handle_redirections) <logging_redirect>: gdb_assert
LOGGING_NO_REDIRECT_FILE.
(show_logging_command) <logging_redirect handling>: Adjust messages
for SAVED_FILENAME not NULL.
(_initialize_cli_logging): Install set_logging_overwrite and
set_logging_redirect.
* Makefile.in (GDB_WARN_CFLAGS_NO_FORMAT): Convert it to the no- form.
(monitor.o): Replace $(INTERNAL_WARN_CFLAGS) by $(INTERNAL_CFLAGS) and
add $(GDB_WARN_CFLAGS_NO_FORMAT).
(printcmd.o): Replace $(INTERNAL_CFLAGS_BASE) by $(INTERNAL_CFLAGS).
This adds an entry in the NEWS file announcing the GDBserver support
on powerpc-lynxos.
gdb/ChangeLog:
* NEWS: Add entry announcing GDBserver support on powerpc-lynxos.
as a feature reported by -list-target-features.
* gdb.texinfo (GDB/MI Miscellaneous Commands): Document new
feature `reverse' output by -list-target-features.
This patch adds support for powerpc-lynxos.
gdbserver/ChangeLog:
* gdbserver/lynx-low.c, gdbserver/lynx-low.h,
gdbserver/lynx-ppc-low.c: New files.
* Makefile.in (lynx_low_h): New variable.
(lynx-low.o, lynx-ppc-low.o): New rules.
* configure.ac: On LynxOS, link with -lnetinet.
* configure.srv: Add handling of powerpc-*-lynxos* targets.
* configure: regenerate.
vasprintf and vsnprintf are not available on LynxOS, at least not on
version 4.0.0. This patch updates the configury to import them from
libiberty if not available out of the box.
gdbserver/
* Makefile.in (vasprintf.o, vsnprintf.o): New rules.
* configure.ac: Add check for vasprintf and vsnprintf.
* configure, config.in: Regenerate.
* server.h (vasprintf, vsnprintf): Add conditional declarations.
I will need this description for the ppc-lynxos debugger where, AFAICT,
we only have access to the core GP and FP registers. So this adds
powerpc-32 to the list of targets for which a .dat file needs to be
generated.
2010-04-30 Joel Brobecker <brobecker@adacore.com>
* features/Makefile (WHICH): Add rs6000/powerpc-32.
(powerpc-32.o, powerpc-32.c): New rules.
(clean): Also remove powerpc-32.c.
* regformats/rs6000/powerpc-32.dat: Generate.
This patch moves all includes of malloc.h, which were introduced
purely to get access to alloca's declaration, to server.h, next
to the include of alloca.h.
There is one exception: gdbreplay.c, which does not include server.h.
In this case, the include of alloca.h was simply moved up a bit, next
to the include of malloc.h.
gdb/gdbserver/ChangeLog:
* gdbreplay.c: Move include of alloca.h up, next to include of
malloc.h.
* server.h: Add include of malloc.h.
* mem-break.c: Remove include of malloc.h.
* server.c, tracepoint.c, utils.c, win32-low.c: Likewise.
This reproduces the same approach as in GDB to allow us to build
specific files without -Werror.
gdb/gdbserver/ChangeLog:
* Makefile.in (INTERNAL_CFLAGS_BASE): New variable. Extracted
from INTERNAL_CFLAGS.
(INTERNAL_WARN_CFLAGS): New variable.
(INTERNAL_CFLAGS): Adjust, using INTERNAL_WARN_CFLAGS.
snprintf is not available on LynxOS, so I changed the calls to snprintf
to calls to xsnprintf, which should be strictly equivalent.
gdb/gdbserver/ChangeLog:
* utils.c (xsnprintf): Make non-static.
* server.h: Add xsnprintf declaration.
* linux-low.c, nto-low.c, target.c, thread-db.c, tracepoint.c:
replace calls to snprintf by calls to xsnprintf throughout.
On LynxOS, alloca is defined in allocal.h. This fixes one warning that
occurs when building GDBserver for LynxOS.
gdb/gdbserver/ChangeLog:
* configure.ac: Add configure check for alloca.
* configure, config.in: Regenerate.
* server.h: Include alloca.h if it exists.
* gdbreplay.c: Include alloca.h if it exists.
gas/testsuite/
2010-08-31 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/11960
* gas/i386/opcode-intel.d: Updated.
* gas/i386/x86-64-opcode.d: Likewise.
* gas/i386/x86-64-opcode.s: Add a "pushw imm16" test.
opcodes/
2010-08-31 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/11960
* i386-dis.c (sIv): New.
(dis386): Replace Iq with sIv on "pushT".
(reg_table): Replace T with {T|} on callT, JcallT, jmpT and JjmpT.
(x86_64_table): Replace {T|}/{P|} with P.
(putop): Add 'w' to 'T'/'P' if needed for Intel syntax.
(OP_sI): Update v_mode. Remove w_mode.
2010-08-31 Sami Wagiaalla <swagiaal@redhat.com>
* symfile.c (reread_symbols): Use psymbol_bcache_free, and
psymbol_bcache_init.
* psymtab.h (psymbol_bcache_init): New function prototype.
(psymbol_bcache_free): New function prototype.
(psymbol_bcache_get_bcache): New function prototype.
* psymtab.c (psymbol_bcache_init): New function.
(psymbol_bcache_free): New function.
(psymbol_bcache_full): New function.
(psymbol_bcache_get_bcache): New function.
(add_psymbol_to_bcache): use psymbol_bcache_full.
* objfiles.h (psymbol_cache): Change type of psymbol_cache to
psymbol_bcache.
* symmisc.c (print_symbol_bcache_statistics): Updated.
(print_objfile_statistics): Updated.
* objfiles.c (allocate_objfile): Use psymbol_bcache_init to initialize
psymbol_cache.
(free_objfile): Use psymbol_bcache_free.
Make linux_get_siginfo_type `type *' unique.
* linux-tdep.c (linux_gdbarch_data_handle, struct linux_gdbarch_data)
(init_linux_gdbarch_data, get_linux_gdbarch_data): New.
(linux_get_siginfo_type): New variable linux_gdbarch_data. Initialize
it. Use linux_gdbarch_data->siginfo_type as a persistent storage.
(_initialize_linux_tdep): New.
2010-08-25 Sami Wagiaalla <swagiaal@redhat.com>
* psymtab.c (add_psymbol_to_bcache): Remove 'static' from
'static partial_symbol psymbol'.
(psymbol_hash): New function.
(psymbol_compare): New function.
* bcache.c (hash_continue): New.
(hash): Use hash_continue.
* bcache.c: Add hash_function and compare_function
pointers to bcache struct.
(bcache_full): Use bcache->hash_function, and
bcache->compare_function.
(bcache_compare): New function.
(bcache_xmalloc): Take hash_function and
compare_function arguments and initialize the
bcach's pointers.
Updated comment.
* objfiles.c (allocate_objfile): Updated.
* symfile.c (reread_symbols): Updated.
* python/py-type.c (typy_richcompare): Updated.
Richard Henderson
Joel Brobecker
Jan Kratochvil
Daniel Jacobowitz
Yao Qi
gdbadmin
Alan Modra
Tom Tromey
Marc Khouzam
Pedro Alves
Nick Clifton
Tristan Gingold
H.J. Lu
Sami Wagiaalla
Michael Snyder
Doug Evans
Kai Tietz