As discussed on gdb-patches, this restores info_command and the
breakpoint on info_command in gdb-gdb.gdb. This reverts a tiny part
of 0743fc83c0 ("Replace most calls to help_list and cmd_show_list"),
as well as 652fc23a30 ("Remove gdb-gdb.gdb breakpoint on disappeared
function info_command.").
gdb/ChangeLog
2020-05-11 Tom Tromey <tromey@adacore.com>
* cli/cli-cmds.c (info_command): Restore.
(_initialize_cli_cmds): Use add_prefix_command for "info".
* gdb-gdb.gdb.in: Restore breakpoint on info_command.
Currently there are many prefix commands that do nothing but call
either help_list or cmd_show_list. I happened to notice that one such
call, for "set print type", used the wrong command list parameter,
causing incorrect output.
Rather than fix this bug in isolation, I decided to eliminate this
possibility by adding two new ways to add prefix commands, which
simply route the call to help_list or cmd_show_list, as appropriate.
This makes it impossible for a mismatch to occur.
In some cases, a bit of output was removed; however, I don't think
this output in general was very useful. It seemed redundant with
what's already printed by help_list. A representative example is this
hunk, removed from ada-lang.c:
- printf_unfiltered (_(\
-"\"set ada\" must be followed by the name of a setting.\n"));
This simplified the CLI style set/show commands quite a bit, and
allowed the deletion of a macro.
This also cleans up some unusual code in windows-tdep.c.
Tested on x86-64 Fedora 30. Note that I have no way to build the
go32-nat.c change.
gdb/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* auto-load.c (show_auto_load_cmd): Remove.
(auto_load_show_cmdlist_get): Use add_show_prefix_cmd.
* arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd.
(maintenance_print_arc_command): Remove.
* tui/tui-win.c (tui_command): Remove.
(tui_get_cmd_list): Use add_basic_prefix_cmd.
* tui/tui-layout.c (tui_layout_command): Remove.
(_initialize_tui_layout): Use add_basic_prefix_cmd.
* python/python.c (user_set_python, user_show_python): Remove.
(_initialize_python): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* guile/guile.c (set_guile_command, show_guile_command): Remove.
(install_gdb_commands): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_guile_command): Remove.
* dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove.
(_initialize_dwarf2_read): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Remove do_set and do_show parameters.
* cli/cli-style.c (set_style, show_style): Remove.
(_initialize_cli_style): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(cli_style_option::add_setshow_commands): Remove do_set and
do_show parameters.
(cli_style_option::add_setshow_commands): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
(STYLE_ADD_SETSHOW_COMMANDS): Remove macro.
(set_style_name): Remove.
* cli/cli-dump.c (dump_command, append_command): Remove.
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Remove.
(_initialize_cli_dump): Use add_basic_prefix_cmd.
* windows-tdep.c (w32_prefix_command_valid): Remove global.
(init_w32_command_list): Remove; move into ...
(_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Remove.
(_initialize_valprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* typeprint.c (set_print_type, show_print_type): Remove.
(_initialize_typeprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record.c (set_record_command, show_record_command): Remove.
(_initialize_record): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_command, show_command, set_debug, show_debug): Remove.
* top.h (set_history, show_history): Don't declare.
* top.c (set_history, show_history): Remove.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Remove.
(_initialize_target_descriptions): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* symtab.c (info_module_command): Remove.
(_initialize_symtab): Use add_basic_prefix_cmd.
* symfile.c (overlay_command): Remove.
(_initialize_symfile): Use add_basic_prefix_cmd.
* sparc64-tdep.c (info_adi_command): Remove.
(_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd.
* sh-tdep.c (show_sh_command, set_sh_command): Remove.
(_initialize_sh_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* serial.c (serial_set_cmd, serial_show_cmd): Remove.
(_initialize_serial): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove.
(_initialize_ser_tcp): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command)
(_initialize_rs6000_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* riscv-tdep.c (show_riscv_command, set_riscv_command)
(show_debug_riscv_command, set_debug_riscv_command): Remove.
(_initialize_riscv_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* remote.c (remote_command, set_remote_cmd): Remove.
(_initialize_remote): Use add_basic_prefix_cmd.
* record-full.c (set_record_full_command)
(show_record_full_command): Remove.
(_initialize_record_full): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record-btrace.c (cmd_set_record_btrace)
(cmd_show_record_btrace, cmd_set_record_btrace_bts)
(cmd_show_record_btrace_bts, cmd_set_record_btrace_pt)
(cmd_show_record_btrace_pt): Remove.
(_initialize_record_btrace): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Remove.
(_initialize_ravenscar): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (show_mips_command, set_mips_command)
(_initialize_mips_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_check_command, maintenance_print_command)
(maintenance_set_cmd, maintenance_show_cmd): Remove.
(_initialize_maint_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_per_command_cmd): Remove.
* maint-test-settings.c (maintenance_set_test_settings_cmd):
Remove.
(maintenance_show_test_settings_cmd): Remove.
(_initialize_maint_test_settings): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint-test-options.c (maintenance_test_options_command):
Remove.
(_initialize_maint_test_options): Use add_basic_prefix_cmd.
* macrocmd.c (macro_command): Remove
(_initialize_macrocmd): Use add_basic_prefix_cmd.
* language.c (set_check, show_check): Remove.
(_initialize_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* infcmd.c (unset_command): Remove.
(_initialize_infcmd): Use add_basic_prefix_cmd.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove.
(_initialize_i386_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* go32-nat.c (go32_info_dos_command): Remove.
(_initialize_go32_nat): Use add_basic_prefix_cmd.
* cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd)
(do_show_prefix_cmd, add_show_prefix_cmd): New functions.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove.
(_initialize_frame): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* dcache.c (set_dcache_command, show_dcache_command): Remove.
(_initialize_dcache): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cp-support.c (maint_cplus_command): Remove.
(_initialize_cp_support): Use add_basic_prefix_cmd.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd, _initialize_btrace): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
* breakpoint.c (save_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd.
* arm-tdep.c (set_arm_command, show_arm_command): Remove.
(_initialize_arm_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd)
(set_ada_command, show_ada_command): Remove.
(_initialize_ada_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare.
gdb/testsuite/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* gdb.cp/maint.exp (test_help): Simplify multiple_help_body.
Update tests.
* gdb.btrace/cpu.exp: Update tests.
* gdb.base/maint.exp: Update tests.
* gdb.base/default.exp: Update tests.
* gdb.base/completion.exp: Update tests.
When a Windows program is terminated by a fatal exception, its exit
code is the value of that exception, as defined by the various
EXCEPTION_* symbols in the Windows API headers. This commit emulates
WTERMSIG etc. by translating the fatal exception codes to more-or-less
equivalent Posix signals.
gdb/ChangeLog:
2020-01-06 Eli Zaretskii <eliz@gnu.org>
Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add gdbsupport/gdb_wait.c.
* windows-tdep.c: New enumeration of WINDOWS_SIG* signals.
(windows_gdb_signal_to_target): New function, uses the above
enumeration to convert GDB internal signal codes to equivalent
Windows codes.
(windows_init_abi): Call set_gdbarch_gdb_signal_to_target.
* windows-nat.c: Include "gdb_wait.h".
(get_windows_debug_event): Extract the fatal exception from the
exit status and convert to the equivalent Posix signal number.
* cli/cli-cmds.c (exit_status_set_internal_vars): Account for the
possibility that WTERMSIG returns GDB_SIGNAL_UNKNOWN.
* gdbsupport/gdb_wait.c: New file, implements
windows_status_to_termsig.
* gdbsupport/gdb_wait.h (WIFEXITED, WIFSIGNALED, WEXITSTATUS)
(WTERMSIG) [__MINGW32__]: Separate definitions for MinGW.
gdb/gdbserver/ChangeLog:
2020-01-06 Eli Zaretskii <eliz@gnu.org>
Pedro Alves <palves@redhat.com>
* win32-low.c (get_child_debug_event): Extract the fatal exception
from the exit status and convert to the equivalent Posix signal
number.
(win32_wait): Allow TARGET_WAITKIND_SIGNALLED status as well.
* Makefile.in (OBS, SFILES): Add gdb_wait.[co].
I noticed that print_disassembly has two #if blocks for TUI code,
where one would do. This patch rearranges the code slightly to remove
a #if.
gdb/ChangeLog
2019-12-27 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (print_disassembly): Reorder "if".
Change-Id: I36f3f682f5685b3d9b148da5aed26eb3cc7d598e
I went through most of the spots that include readline.h and, when
appropriate, either removed the include or changed it to include
tilde.h.
Note that remote-sim.c and bsd-kvm.c could probably include tilde.h
instead, but I did not change these. I think I can't build the
latter, and I didn't want to set up a sim build for the former.
Tested by rebuilding.
gdb/ChangeLog
2019-11-06 Tom Tromey <tom@tromey.com>
* tui/tui-interp.c: Don't include readline.h.
* tui/tui-hooks.c: Don't include readline.h.
* symmisc.c: Include tilde.h, not readline.h.
* symfile.c: Include tilde.h, not readline.h.
* source.c: Include tilde.h, not readline.h.
* solib.c: Include tilde.h, not readline.h.
* psymtab.c: Include tilde.h, not readline.h.
* exec.c: Include tilde.h, not readline.h.
* corelow.c: Include tilde.h, not readline.h.
* cli/cli-dump.c: Include tilde.h, not readline.h.
* cli/cli-cmds.c: Don't include readline.h.
Change-Id: I60487a190c43128b800ef77517d1ab42957571d7
The new convenience functions $_gdb_setting and $_gdb_setting_str
provide access to the GDB settings in user-defined commands.
Similarly, $_gdb_maint_setting and $_gdb_maint_setting_str
provide access to the GDB maintenance settings.
The patch was developed following a comment of Eli about the
'set may-call-functions'. Eli said that user-defined functions
should have a way to change their behavior according to this setting.
Rather than have a specialized $_may_call_functions, this patch
implements a general way to access any GDB setting.
Compared to doing such access via Python 'gdb.parameter' and/or
'gdb.execute("set somesetting tosomevalue"):
* The 'with' command is much better than the above python usage:
if the user types C-c or an error happens between the set pagination off
and the python "set pagination on", the above python
does not restore the original setting.
* Effectively, with the "gdb.parameter" python one liner, it is possible to do
simple 'if' conditions, such as set and restore pagination.
But mixing the "python if" within canned
sequence of commands is cumbersome for non trivial combinations.
E.g. if several commands have to be done for a certain condition
accessed from python, I guess something like will be needed:
python if __some_setting: gdb.execute("some command")
python if __some_setting: gdb.execute("some other command")
python if __some_setting: gdb.execute("some different command")
(without speaking about nested "if-s").
With the convenience function:
if $_gdb_setting("some_setting")
some command
some other command
some different command
end
Integer settings (for example print elements) will also be more difficult
to use.
For example, a user defined function that scans and prints a linked list
might want to use the value of "set print elements" to stop printing
the linked list.
Doing that by mixing python expression/if is likely doable, but seems
not easy with the above one liners.
So, in summary, the $_gdb_setting and $_gdb_setting_str avoids to have the
heterogeneous mix of python and GDB commands in one single script
(and of course, it works even if python is not configured, but that
must be an unusual setup I guess).
gdb/ChangeLog
2019-10-31 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (setting_cmd, value_from_setting)
(gdb_setting_internal_fn, gdb_maint_setting_internal_fn)
(str_value_from_setting, gdb_setting_str_internal_fn)
(gdb_maint_setting_str_internal_fn): New functions.
(_initialize_cli_cmds): Define the new convenience functions.
* gdb/cli/cli-setshow.h (get_setshow_command_value_string): Constify.
* gdb/cli/cli-setshow.c (get_setshow_command_value_string): Constify.
Also removes an unnecessary declaration of cmdlist in cli-cmds.c.
I don't understand why it is there, the definition of cmdlist is
at the top of the same file.
gdb/ChangeLog:
2019-10-12 Christian Biesinger <cbiesinger@google.com>
* cli/cli-cmds.c (max_user_call_depth): Move comment to header.
(show_user): Remove declaration of cmdlist.
* cli/cli-cmds.h (max_user_call_depth): Declare.
* cli/cli-script.c (execute_user_command): Remove declaration
of max_user_call_depth.
This changes the "pwd" command to style its output.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (pwd_command): Style output.
gdb/testsuite/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Test "pwd".
Running 'with' without arguments crashes GDB. This fixes it.
gdb/ChangeLog:
2019-08-21 Bogdan Harjoc <harjoc@gmail.com>
* cli/cli-cmds.c (with_command_1): Error out if no arguments.
gdb/testsuite/ChangeLog:
2019-08-21 Pedro Alves <palves@redhat.com>
* gdb.base/with.exp: Test "with" with no arguments.
With this patch, the help docs now respect 2 invariants:
* The first line of a command help is terminated by a '.' character.
* The last character of a command help is not a newline character.
Note that the changes for the last invariant were done by Tom, as part of :
[PATCH] Remove trailing newlines from help text
https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html
but some occurrences have been re-introduced since then.
Some help docs had to be rephrased/restructured to respect the above
invariants.
Before this patch, print_doc_line was printing the first line
of a command help documentation, but stopping at the first '.'
or ',' character.
This was giving inconsistent results :
* The first line of command helps was sometimes '.' terminated,
sometimes not.
* The first line of command helps was not always designed to be
readable/understandable/unambiguous when stopping at the first
'.' or ',' character.
This e.g. created the following inconsistencies/problems:
< catch exception -- Catch Ada exceptions
< catch handlers -- Catch Ada exceptions
< catch syscall -- Catch system calls by their names
< down-silently -- Same as the `down' command
while the new help is:
> catch exception -- Catch Ada exceptions, when raised.
> catch handlers -- Catch Ada exceptions, when handled.
> catch syscall -- Catch system calls by their names, groups and/or numbers.
> down-silently -- Same as the `down' command, but does not print anything.
Also, the command help doc should not be terminated by a newline
character, but this was not respected by all commands.
The cli-option -OPT framework re-introduced some occurences.
So, the -OPT build help framework was changed to not output newlines at the
end of %OPTIONS% replacement.
This patch changes the help documentations to ensure the 2 invariants
given above.
It implied to slightly rephrase or restructure some help docs.
Based on the above invariants, print_doc_line (called by
'apropos' and 'help' commands to print the first line of a command
help) now outputs the full first line of a command help.
This all results in a lot of small changes in the produced help docs.
There are less code changes than changes in the help docs, as a lot
of docs are produced by some code (e.g. the remote packet usage settings).
gdb/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.h (print_doc_line): Add for_value_prefix argument.
* cli/cli-decode.c (print_doc_line): Likewise. It now prints
the full first line, except when FOR_VALUE_PREFIX. In this case,
the trailing '.' is not output, and the first character is uppercased.
(print_help_for_command): Update call to print_doc_line.
(print_doc_of_command): Likewise.
* cli/cli-setshow.c (deprecated_show_value_hack): Likewise.
* cli/cli-option.c (append_indented_doc): Do not append newline.
(build_help_option): Append newline after first appended_indented_doc
only if a second call is done.
(build_help): Append 2 new lines before each option, except the first
one.
* compile/compile.c (_initialize_compile): Add new lines after
%OPTIONS%, when not at the end of the help.
Change help doc or code
producing the help doc to respect the invariants.
* maint-test-options.c (_initialize_maint_test_options): Likewise.
Also removed the new line after 'Options:', as all other commands
do not put an empty line between 'Options:' and the first option.
* printcmd.c (_initialize_printcmd): Likewise.
* stack.c (_initialize_stack): Likewise.
* interps.c (interpreter_exec_cmd): Fix "Usage:" line that was
incorrectly telling COMMAND is optional.
* ada-lang.c (_initialize_ada_language): Change help doc or code
producing the help doc to respect the invariants.
* ada-tasks.c (_initialize_ada_tasks): Likewise.
* breakpoint.c (_initialize_breakpoint): Likewise.
* cli/cli-cmds.c (_initialize_cli_cmds): Likewise.
* cli/cli-logging.c (_initialize_cli_logging): Likewise.
* cli/cli-setshow.c (_initialize_cli_setshow): Likewise.
* cli/cli-style.c (cli_style_option::add_setshow_commands,
_initialize_cli_style): Likewise.
* corelow.c (core_target_info): Likewise.
* dwarf-index-cache.c (_initialize_index_cache): Likewise.
* dwarf2read.c (_initialize_dwarf2_read): Likewise.
* filesystem.c (_initialize_filesystem): Likewise.
* frame.c (_initialize_frame): Likewise.
* gnu-nat.c (add_task_commands): Likewise.
* infcall.c (_initialize_infcall): Likewise.
* infcmd.c (_initialize_infcmd): Likewise.
* interps.c (_initialize_interpreter): Likewise.
* language.c (_initialize_language): Likewise.
* linux-fork.c (_initialize_linux_fork): Likewise.
* maint-test-settings.c (_initialize_maint_test_settings): Likewise.
* maint.c (_initialize_maint_cmds): Likewise.
* memattr.c (_initialize_mem): Likewise.
* printcmd.c (_initialize_printcmd): Likewise.
* python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq,
_RegEx): Likewise.
* ravenscar-thread.c (_initialize_ravenscar): Likewise.
* record-btrace.c (_initialize_record_btrace): Likewise.
* record-full.c (_initialize_record_full): Likewise.
* record.c (_initialize_record): Likewise.
* regcache-dump.c (_initialize_regcache_dump): Likewise.
* regcache.c (_initialize_regcache): Likewise.
* remote.c (add_packet_config_cmd, init_remote_threadtests,
_initialize_remote): Likewise.
* ser-tcp.c (_initialize_ser_tcp): Likewise.
* serial.c (_initialize_serial): Likewise.
* skip.c (_initialize_step_skip): Likewise.
* source.c (_initialize_source): Likewise.
* stack.c (_initialize_stack): Likewise.
* symfile.c (_initialize_symfile): Likewise.
* symtab.c (_initialize_symtab): Likewise.
* target-descriptions.c (_initialize_target_descriptions): Likewise.
* top.c (init_main): Likewise.
* tracefile-tfile.c (tfile_target_info): Likewise.
* tracepoint.c (_initialize_tracepoint): Likewise.
* tui/tui-win.c (_initialize_tui_win): Likewise.
* utils.c (add_internal_problem_command): Likewise.
* valprint.c (value_print_option_defs): Likewise.
gdb/testsuite/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/style.exp: Update tests for help doc new invariants.
* gdb.base/help.exp: Likewise.
I noticed that init_cli_cmds only installs a command, and so doesn't
need to be handled specially. This patch merges it into
_initialize_cli_cmds.
The help text is constructed dynamically, which is sometimes an
indication that special treatment is needed; but in this case it is
just to insert the value of "gdbinit", which is created at
compile-time and not modified; so this doesn't affect the result.
This version also removes the "gdbinit" global. There's no need for
it, as GDBINIT can be used instead. Note, though, that the help text
in question must still be dynamically constructed, in order to be
i18n-friendly.
gdb/ChangeLog
2019-07-11 Tom Tromey <tromey@adacore.com>
* main.c (get_init_files): Use GDBINIT, not gdbinit.
* auto-load.c (file_is_auto_load_safe): Use GDBINIT, not gdbinit.
* top.h (gdbinit): Don't declare.
* cli/cli-cmds.c (init_cli_cmds): Remove, merging contents
into...
(_initialize_cli_cmds): ...here. Use GDBINIT, not gdbinit.
* top.c (gdb_init): Don't call init_cli_cmds.
(gdbinit): Remove.
* cli/cli-cmds.h (init_cli_cmds): Don't declare.
This commit adds a completer for the "pipe" command. It can complete
"pipe"'s options, and the specified GDB command.
To make the completer aware of the "-d" option, this converts the
option processing to use gdb::option.
Tests included.
gdb/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
PR cli/24732
* cli/cli-cmds.c (struct pipe_cmd_opts): New.
(pipe_cmd_option_defs): New.
(make_pipe_cmd_options_def_group): New.
(pipe_command): Use gdb::option::process_options.
(pipe_command_completer): New function.
(_initialize_cli_cmds): Install completer for "pipe" command.
gdb/testsuite/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
PR cli/24732
* gdb.base/shell.exp: Load completion-support.exp.
Adjust expected error output. Add completion tests.
( See original discussion and prototype here:
https://sourceware.org/ml/gdb-patches/2019-05/msg00570.html )
(gdb) help with
Temporarily set SETTING to VALUE, run COMMAND, and restore SETTING.
Usage: with SETTING [VALUE] [-- COMMAND]
Usage: w SETTING [VALUE] [-- COMMAND]
With no COMMAND, repeats the last executed command.
SETTING is any setting you can change with the "set" subcommands.
E.g.:
with language pascal -- print obj
with print elements unlimited -- print obj
As can be seen above, the "with" command is just like "set", but
instead of setting the setting permanently, it sets the setting, runs
a command and then restores the setting.
(gdb) p g_s
$1 = {a = 1, b = 2, c = 3}
(gdb) with language ada -- print g_s
$2 = (a => 1, b => 2, c => 3)
Warning: the current language does not match this frame.
(gdb) show language
The current source language is "auto; currently c".
(gdb) with print elements 100 -- with print object on -- print 1
$3 = 1
You can shorten things a bit though, as long as unambiguous. So this:
(gdb) with print elements 100 -- with print object off -- print 1
is the same as:
(gdb) w p el 100 -- w p o 0 -- p 1
Note that the patch adds a "w" alias for "with", as "w" is not
currently taken:
(gdb) w
Ambiguous command "w": watch, wh, whatis, where, while, while-stepping, winheight, ws.
Let me know if you'd prefer to reserve "w" for one of the other
commands above. IMHO, this command will end up being used frequently
enough that it deserves the "w" shorthand.
A nice feature is that this is fully integrated with TAB-completion:
(gdb) with p[TAB]
pagination print prompt python
(gdb) with print [TAB]
address max-depth static-members
array max-symbolic-offset symbol
array-indexes null-stop symbol-filename
asm-demangle object symbol-loading
demangle pascal_static-members thread-events
elements pretty type
entry-values raw union
frame-arguments repeats vtbl
inferior-events sevenbit-strings
(gdb) with print [TAB]
(gdb) with print elements unlimited -- thread apply all -[TAB]
-ascending -c -q -s
(gdb) with print elements unlimited -- print -[TAB]
-address -max-depth -repeats -vtbl
-array -null-stop -static-members
-array-indexes -object -symbol
-elements -pretty -union
The main advantage of this new command compared to command options,
like the new "print -OPT", is that this command works with any
setting, and, it works nicely when you want to override a setting
while running a user-defined command, like:
(gdb) with print pretty -- usercmd
The disadvantage is that it isn't as compact or easy to type. I think
of command options and this command as complementary. I think that
even with this new command, it makes sense to continue developing the
command options in the direction of exposing most-oft-used settings as
command options.
Inspired by Philippe's "/" command proposal, if no command is
specified, then the last command is re-invoked, under the overridden
setting:
(gdb) p g_s
$1 = {a = 1, b = 2, c = 3}
(gdb) with language ada
$2 = (a => 1, b => 2, c => 3)
Warning: the current language does not match this frame.
Note: "with" requires "--" to separate the setting from the command.
It might be possible to do without that, but, I haven't tried it yet,
and I think that this can go in without it. We can always downgrade
to making "--" optional if we manage to make it work.
On to the patch itself, the implementation of the command is simpler
than one might expect. A few details:
- I factored out a bit from pipe_command into repeat_previous
directly, because otherwise I'd need to copy&paste the same code and
same error message in the with command.
- The parse_cli_var_uinteger / parse_cli_var_zuinteger_unlimited /
do_set_command changes are necessary since we can now pass an empty
string as argument.
- do_show_command was split in two, as a FIXME comment suggests, but
for a different reason: we need to get a string version of a "set"
command's value, and we already had code for that in
do_show_command. That code is now factored out to the new
get_setshow_command_value_string function.
- There's a new "maint with" command added too:
(gdb) help maint with
Like "with", but works with "maintenance set" variables.
Usage: maintenance with SETTING [VALUE] [-- COMMAND]
With no COMMAND, repeats the last executed command.
SETTING is any setting you can change with the "maintenance set"
subcommands.
"with" and "maint with" share 99% of the implementation.
This might be useful on its own, but it's also useful for testing,
since with this, we can use the "maint set/show test-settings"
settings for exercising the "with" machinery with all the command
type variants (all enum var_types). This is done in the new
gdb/base/with.exp testcase.
The documentation bits are originally based on Philippe's docs for the
"/" command, hence the attribution in the ChangeLog.
gdb/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention "with" and "maint with".
* cli/cli-cmds.c (with_command_1, with_command_completer_1)
(with_command, with_command_completer): New.
(pipe_command): Adjust to new repeat_previous
interface.
(_initialize_cli_cmds): Install the "with" command and its "w"
alias.
* cli/cli-cmds.h (with_command_1, with_command_completer_1): New
declarations.
* cli/cli-setshow.c (parse_cli_var_uinteger)
(parse_cli_var_zuinteger_unlimited, do_set_command): Handle empty
argument strings for all var_types.
(get_setshow_command_value_string): New, factored out from ...
(do_show_command): ... this.
* cli/cli-setshow.h: Include <string>.
(get_setshow_command_value_string): Declare.
* command.h (repeat_previous): Now returns const char *. Adjust
comment.
* maint.c: Include "cli/cli-cmds.h".
(maintenance_with_cmd, maintenance_with_cmd_completer): New.
(_initialize_maint_cmds): Register the "maintenance with" command.
* top.c (repeat_previous): Move bits from pipe_command here:
Return the saved command line, if any; error out if there's no
command to relaunch.
gdb/doc/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Command Settings): New node documenting the general
concept of settings, how to change them, and the new "with"
command.
(Maintenance Commands): Document "maint with".
gdb/testsuite/ChangeLog:
2019-07-03 Pedro Alves <palves@redhat.com>
* gdb.base/with.c: New file.
* gdb.base/with.exp: New file.
alias_command does not detect that the prefixes of the alias command and the
aliased command are not matching: it is comparing the alias prefix
with itself, instead of comparing it with the aliased command prefix.
This causes either the alias command to silently do nothing,
or to have GDB asserting:
(gdb) alias assigne imprime limite-elements = set print elements
../../binutils-gdb/gdb/cli/cli-cmds.c:1552: internal-error: void alias_command(const char*, int): Assertion `c_command != NULL && c_command != (struct cmd_list_element *) -1' failed.
A problem internal to GDB has been detected,
Fix the logic, and update gdb.base/alias.exp to test these cases.
gdb/ChangeLog
2019-06-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (alias_command): Compare the alias prefix
with the command prefix.
gdb/testsuite/ChangeLog
2019-06-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/alias.exp: Test non matching/non existing prefixes.
Basically every caller of check_for_argument needs to skip space after
the argument. This patch makes check_for_argument do it itself.
Suggested by Philippe Waroquiers.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Remove skip_spaces call.
* breakpoint.c (watch_maybe_just_location): Remove skip_spaces
call.
* cli/cli-cmds.c (apropos_command): Remove skip_spaces call.
* cli/cli-utils.c (extract_info_print_args): Remove skip_spaces
calls.
(check_for_argument): Skip spaces after argument.
ARI pointed out that a recent patch introduced a call to "warning"
with a string that ended in a newline:
https://sourceware.org/ml/gdb-patches/2019-06/msg00000.html
This is generally forbidden, I believe, because warning adds its own
newline.
This patch removes all of the trailing newlines I was able to find. I
searched for 'warning (.*\\n"' and then fixed the ones where the
newline appeared at the end of the string (some had internal
newlines).
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* m32c-tdep.c (m32c_m16c_address_to_pointer): Don't end warning
with a newline.
* guile/guile.c (handle_boot_error): Don't end warning with a
newline.
* cli/cli-cmds.c (exit_status_set_internal_vars): Don't end
warning with a newline.
* s12z-tdep.c (s12z_skip_prologue): Don't end warning with a
newline.
(s12z_frame_cache): Likewise.
* dwarf-index-cache.c (index_cache::store): Don't end warning with
a newline.
* solib-svr4.c (disable_probes_interface): Don't end warning with
a newline.
* nat/fork-inferior.c (fork_inferior): Don't end warning with a
newline.
* python/python.c (do_finish_initialization): Don't end warning
with a newline.
gdb/gdbserver/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* remote-utils.c (look_up_one_symbol, relocate_instruction): Don't
end warning with a newline.
* linux-s390-low.c (s390_get_wordsize): Don't end warning with a
newline.
* thread-db.c (attach_thread): Don't end warning with a newline.
(thread_db_notice_clone): Likewise.
* tracepoint.c (gdb_agent_helper_thread): Don't end warning with a
newline.
* linux-x86-low.c (x86_get_min_fast_tracepoint_insn_len): Don't
end warning with a newline.
The "help" command can output long list of command names or classes.
Use the title style to style the command names or classes to make
the output more readable.
Similarly, change "apropos" command to also style the command names.
It is sometimes unclear why "apropos REGEXP" lists some commands,
and then the user has to manually do 'help command' for all commands
listed by "apropos" to see more details about the matching commands.
=> Add an optional flag -v so that "apropos -v REGEXP":
* outputs the full documentation of matching commands.
* highlights the documentation parts matching REGEXP.
The pipe command allows to run a GDB command, and pipe its output
to a shell command:
(gdb) help pipe
Send the output of a gdb command to a shell command.
Usage: | [COMMAND] | SHELL_COMMAND
Usage: | -d DELIM COMMAND DELIM SHELL_COMMAND
Usage: pipe [COMMAND] | SHELL_COMMAND
Usage: pipe -d DELIM COMMAND DELIM SHELL_COMMAND
Executes COMMAND and sends its output to SHELL_COMMAND.
The -d option indicates to use the string DELIM to separate COMMAND
from SHELL_COMMAND, in alternative to |. This is useful in
case COMMAND contains a | character.
With no COMMAND, repeat the last executed command
and send its output to SHELL_COMMAND.
(gdb)
For example:
(gdb) pipe print some_data_structure | grep -B3 -A3 something
The pipe character is defined as an alias for pipe command, so that
the above can be typed as:
(gdb) | print some_data_structure | grep -B3 -A3 something
If no GDB COMMAND is given, then the previous command is relaunched,
and its output is sent to the given SHELL_COMMAND.
This also defines convenience vars $_shell_exitcode and $_shell_exitsignal
to record the exit code and exit signal of the last shell command
launched by GDB e.g. by "shell", "pipe", ...
gdb/ChangeLog
2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (pipe_command): New function.
(_initialize_cli_cmds): Call add_com for pipe_command.
Define | as an alias for pipe.
(exit_status_set_internal_vars): New function.
(shell_escape): Call exit_status_set_internal_vars.
cli/cli-decode.c (find_command_name_length): Recognize | as
a single character command.
When building gdb on ubuntu 16.04 with gcc 5.4.0, and running the gdb
testsuite we run into:
...
FAIL: gdb.linespec/explicit.exp: complete after -line: \
cmd complete "b -line argument " (timeout)
...
The failure is reproducible outside the testsuite like this:
...
$ gdb -q build/gdb/testsuite/outputs/gdb.linespec/explicit/explicit \
-ex "complete b -line argument"
Reading symbols from \
build/gdb/testsuite/outputs/gdb.linespec/explicit/explicit...
terminate called after throwing an instance of 'std::length_error'
what(): basic_string::_M_create
Aborted (core dumped)
...
The problem is here in complete_command:
...
completion_result result = complete (arg, &word, "e_char);
std::string arg_prefix (arg, word - arg);
if (result.number_matches != 0)
...
The problem is that the word variable is not initialized when
result.number_matches == 0, but the variable is still used in the arg_prefix
initialization.
Fix this by guarding the arg_prefix initialization with the
'result.number_matches != 0' test.
Build and tested on x86_64-linux.
gdb/ChangeLog:
2019-05-21 Tom de Vries <tdevries@suse.de>
PR cli/24587
* cli/cli-cmds.c (complete_command): Fix use of unitialized variable.
Extract completion logic from CLI complete_command() into a new
helper function complete().
gdb/Changelog:
* completer.h (complete): New function.
* completer.c (complete): Likewise.
* cli/cli-cmds.c: (complete_command): Update to use new complete()
function defined in completer.h.
gdb/ChangeLog
2019-04-19 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (_initialize_cli_cmds): Move "shell" "!" alias
close to the add_com "shell".
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
A customer noticed some mildly odd MI output, where CLI output was
split into multiple MI strings at unusual boundaries, like this:
~"$1 = (b => true"
~", p => 0x407260"
This is technically correct according to the MI spec, but still
unusual, in that there's no particular reason for the string to be
split where it is.
I tracked this down to a call to gdb_flush in generic_val_print.
Then, I went through all calls to gdb_flush and removed the ones I
thought were superfluous. In particular:
* Any call in the value-printing code;
* Likewise the type-printing code (just a single call); and
* Any call that immediately followed a printf that obviously
ended with a newline, my belief being that gdb's standard output
streams are line buffered (by inheriting the behavior from stdio)
Regression tested on x86-64 Fedora 29.
I didn't add a new test case. I tend to think we don't necessarily
want to specify this behavior in the tests. Let me know what you
think of this.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* windows-nat.c (windows_nat_target::attach)
(windows_nat_target::detach): Don't call gdb_flush.
* valprint.c (generic_val_print, val_print, val_print_string):
Don't call gdb_flush.
* utils.c (defaulted_query): Don't call gdb_flush.
* typeprint.c (print_type_scalar): Don't call gdb_flush.
* target.c (target_announce_detach): Don't call gdb_flush.
* sparc64-tdep.c (adi_print_versions): Don't call gdb_flush.
* remote.c (extended_remote_target::attach): Don't call
gdb_flush.
* procfs.c (procfs_target::detach): Don't call gdb_flush.
* printcmd.c (do_examine): Don't call gdb_flush.
(info_display_command): Don't call gdb_flush.
* p-valprint.c (pascal_val_print): Don't call gdb_flush.
* nto-procfs.c (nto_procfs_target::attach): Don't call gdb_flush.
* memattr.c (info_mem_command): Don't call gdb_flush.
* mdebugread.c (mdebug_build_psymtabs): Don't call gdb_flush.
* m2-valprint.c (m2_val_print): Don't call gdb_flush.
* infrun.c (follow_exec, handle_command): Don't call gdb_flush.
* inf-ptrace.c (inf_ptrace_target::attach): Don't call gdb_flush.
* hppa-tdep.c (unwind_command): Don't call gdb_flush.
* gnu-nat.c (gnu_nat_target::attach): Don't call gdb_flush.
(gnu_nat_target::detach): Don't call gdb_flush.
* f-valprint.c (f_val_print): Don't call gdb_flush.
* darwin-nat.c (darwin_nat_target::attach): Don't call gdb_flush.
* cli/cli-script.c (read_command_lines): Don't call gdb_flush.
* cli/cli-cmds.c (shell_escape, print_disassembly): Don't call
gdb_flush.
* c-valprint.c (c_val_print): Don't call gdb_flush.
* ada-valprint.c (ada_print_scalar): Don't call gdb_flush.
When printing source lines with calls to print_source_lines we need to
pass a start line number and an end line number. The end line number
is calculated by calling get_lines_to_list and adding this value to
the start line number. For example this code from list_command:
print_source_lines (cursal.symtab, first,
first + get_lines_to_list (), 0);
The problem is that get_lines_to_list returns a value based on the
GDB setting `set listsize LISTSIZE`. By default LISTSIZE is 10,
however, its also possible to set LISTSIZE to unlimited, in which
case get_lines_to_list will return INT_MAX.
As the parameter signature for print_source_lines is:
void print_source_lines (struct symtab *, int, int,
print_source_lines_flags);
and `first` in the above code is an `int`, then when LISTSIZE is
`unlimited` the above code will result in signed integer overflow,
which is undefined.
The solution in this patch is a new class source_lines_range that can
be constructed from a single line number and a direction (forward or
backward). The range is then constructed from the line number and the
value of get_lines_to_list.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Pass a source_lines_range to
print_source_lines.
* source.c (print_source_lines_base): Update line number check.
(print_source_lines): New function.
(source_lines_range::source_lines_range): New function.
* source.h (class source_lines_range): New class.
(print_source_lines): New declaration.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This adds a function that can be used to reset terminal styles,
regardless of what style the low-level output routines currently think
is applied.
This is used to make "echo" and "printf" work properly when emitting
ANSI terminal escapes -- now gdb will reset the style at the end of
the command.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.h (reset_terminal_style): Declare.
* utils.c (can_emit_style_escape): New function.
(set_output_style): Use it.
(reset_terminal_style): New function.
* printcmd.c (printf_command): Call reset_terminal_style.
* cli/cli-cmds.c (echo_command): Call reset_terminal_style.
I noticed several places in gdb that were using getenv("SHELL") and
then falling back to "/bin/sh" if it returned NULL. This unifies
these into a single function.
gdb/ChangeLog
2018-10-27 Tom Tromey <tom@tromey.com>
* procfs.c (procfs_target::create_inferior): Use get_shell.
* cli/cli-cmds.c (shell_escape): Use get_shell.
* windows-nat.c (windows_nat_target::create_inferior): Use
get_shell.
* common/pathstuff.c (get_shell): New function.
* nat/fork-inferior.c (SHELL_FILE, get_startup_shell): Remove.
(fork_inferior): Use get_shell.
* common/pathstuff.h (get_shell): Declare.
This fixes all the straightforward -Wshadow=local warnings in gdb. A
few standard approaches are used here:
* Renaming an inner (or outer, but more commonly inner) variable;
* Lowering a declaration to avoid a clash;
* Moving a declaration into a more inner scope to avoid a clash,
including the special case of moving a declaration into a loop header.
I did not consider any of the changes in this patch to be particularly
noteworthy, though of course they should all still be examined.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* ctf.c (SET_ARRAY_FIELD): Rename "u32".
* p-valprint.c (pascal_val_print): Split inner "i" variable.
* xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
header.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
more inner scope.
* xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
* varobj.c (varobj_update): Rename inner "newobj",
"type_changed".
* valprint.c (generic_emit_char): Rename inner "buf".
* valops.c (find_overload_match): Rename inner "temp".
(value_struct_elt_for_reference): Declare "v" in more inner
scope.
* v850-tdep.c (v850_push_dummy_call): Rename "len".
* unittests/array-view-selftests.c (run_tests): Rename inner
"vec".
* tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
header.
* tracepoint.c (merge_uploaded_trace_state_variables): Declare
"tsv" in more inner scope.
(print_one_static_tracepoint_marker): Rename inner
"tuple_emitter".
* tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
(tic6x_push_dummy_call): Don't redeclare "addr".
* target-float.c: Declare "dto" lower.
* symtab.c (lookup_local_symbol): Rename inner "sym".
(find_pc_sect_line): Rename inner "pc".
* stack.c (print_frame): Don't redeclare "gdbarch".
(return_command): Rename inner "gdbarch".
* s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
"sp".
* rust-lang.c (rust_internal_print_type): Declare "i" in loop
header.
* rs6000-tdep.c (ppc_process_record): Rename inner "addr".
* riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
scope.
* remote.c (remote_target::update_thread_list): Don't redeclare
"tp".
(remote_target::process_initial_stop_replies): Rename inner
"thread".
(remote_target::remote_parse_stop_reply): Don't redeclare "p".
(remote_target::wait_as): Don't redeclare "stop_reply".
(remote_target::get_thread_local_address): Rename inner
"result".
(remote_target::get_tib_address): Likewise.
I noticed a couple of unnecessary casts in cli-cmds.c. This patch
removes them.
Tested by rebuilding. I'm checking this in.
gdb/ChangeLog
2018-09-05 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (shell_escape, edit_command): Remove cast.
This patch adds support for disassembly of blocks with non-contiguous
ranges. These blocks are printed as follows:
(gdb) disassemble foo
Dump of assembler code for function foo:
Address range 0x401136 to 0x401151:
0x0000000000401136 <+0>: push %rbp
0x0000000000401137 <+1>: mov %rsp,%rbp
0x000000000040113a <+4>: callq 0x401134 <bar>
0x000000000040113f <+9>: mov 0x2eef(%rip),%eax # 0x404034 <e>
0x0000000000401145 <+15>: test %eax,%eax
0x0000000000401147 <+17>: je 0x40114e <foo+24>
0x0000000000401149 <+19>: callq 0x401128 <foo+4294967282>
0x000000000040114e <+24>: nop
0x000000000040114f <+25>: pop %rbp
0x0000000000401150 <+26>: retq
Address range 0x401128 to 0x401134:
0x0000000000401128 <+-14>: push %rbp
0x0000000000401129 <+-13>: mov %rsp,%rbp
0x000000000040112c <+-10>: callq 0x401126 <baz>
0x0000000000401131 <+-5>: nop
0x0000000000401132 <+-4>: pop %rbp
0x0000000000401133 <+-3>: retq
End of assembler dump.
This is an actual dump from the test case that I constructed for
this work. The ranges are printed in the order encountered in the
debug info. For the above example, note that the second range occupies
lower addresses than the first range.
Functions with contiguous ranges are still printed as follows:
(gdb) disassemble main
Dump of assembler code for function main:
0x0000000000401151 <+0>: push %rbp
0x0000000000401152 <+1>: mov %rsp,%rbp
0x0000000000401155 <+4>: callq 0x401136 <foo>
0x000000000040115a <+9>: mov $0x0,%eax
0x000000000040115f <+14>: pop %rbp
0x0000000000401160 <+15>: retq
End of assembler dump.
gdb/ChangeLog:
* cli/cli-cmds.c (block.h): Include.
(print_disassembly): Handle printing of non-contiguous blocks.
(disassemble_current_function): Likewise.
(disassemble_command): Likewise.
I happened to notice recently that "gdb --version" says:
GNU gdb (GDB) 8.0.50.20170911-git
Copyright (C) 2017 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word".
This is a bit on the wordy side, but also references interactive
commands, which I think doesn't really make sense for --version.
This patch removes some text from --version, while leaving it in the
"show version" output. It also adds a newline between the URLs and
the "For help, ..." text, because I thought that was easier to read.
Finally, it indents one of the URLs, since that was simpler to read,
but not the other URL, because the current format is specified by the
GNU coding standards section on "--version".
Now the --version output looks like:
GNU gdb (GDB) 8.1.50.20180511-git
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Tested by the buildbot.
gdb/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (show_version): Update.
* top.c (print_gdb_version): Add "interactive" parameter.
Update.
* main.c (captured_main_1): Update.
* top.h (print_gdb_version): Add "interactive" parameter and a
comment.
gdb/testsuite/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
* gdb.base/default.exp: Update expected "show version" output.
This changes openp, source_full_path_of, and find_and_open_source to
take a unique_xmalloc_ptr, rather than a char*, as an outgoing
argument type. This simplifies the API, ownership-wise, and allows
for the removal of some cleanups.
gdb/ChangeLog
2018-02-14 Tom Tromey <tom@tromey.com>
* symfile.c (symfile_bfd_open): Update.
* source.h (openp, source_full_path_of, find_and_open_source):
Change argument type to unique_xmalloc_ptr.
* source.c (openp): Take a unique_xmalloc_ptr.
(source_full_path_of, find_and_open_source): Likewise.
(open_source_file, symtab_to_fullname): Update.
* solist.h (struct target_so_ops) <find_and_open_solib>: Take a
unique_xmalloc_ptr.
* solib.c (solib_find_1): Use unique_xmalloc_ptr.
(exec_file_find): Update.
* psymtab.c (psymtab_to_fullname): Update.
* nto-tdep.h (nto_find_and_open_solib): Update.
* nto-tdep.c (nto_find_and_open_solib): Change temp_path to a
unique_xmalloc_ptr.
* exec.c (exec_file_attach): Update.
* dwarf2read.c (try_open_dwop_file): Use unique_xmalloc_ptr.
* cli/cli-cmds.c (find_and_open_script): Use unique_xmalloc_ptr.
gdb/ChangeLog:
* defs.h (enum openp_flags): New enum.
(OPF_TRY_CWD_FIRST, OPF_SEARCH_IN_PATH, OPF_RETURN_REALPATH):
Move to enum openp_flags.
(openp_flags): New enum flags.
(openp): Change parameter type to openp_flags.
* source.c (openp): Change parameter type to openp_flags.
* cli/cli-cmds.c (find_and_open_script): Use openp_flags.
* dwarf2read.c (try_open_dwop_file): Use openp_flags.
The "x", "list", and "show commands" commands have special repetition
behavior: repeating the command doesn't re-run it with the same
arguments
This is currently implemented by modifying the passed-in argument; but
that won't work properly with const arguments (and seems pretty
obscure besides).
This patch adds a new "set_repeat_arguments" function and changes the
relevant places to call it.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* printcmd.c (x_command): Call set_repeat_arguments.
* cli/cli-cmds.c (list_command): Call set_repeat_arguments.
* top.c (repeat_arguments): New global.
(set_repeat_arguments): New function.
(execute_command): Handle repeat_arguments.
(show_commands): Calls set_repeat_arguments.
* command.h (set_repeat_arguments): Declare.
While we still have cleanups (i.e., make_cleanup & co), we must be
sure to add END_CATCH at the end of a TRY/CATCH/END_CATCH construct.
However, it's currently too easy to miss adding the END_CATCH, because
the code compiles anyway without it. I realized this when I noticed
that another patch I was working on missed several adding END_CATCH in
several new TRY/CATCH uses.
This commit fixes that by making TRY open a new scope that is only
closed by END_CATCH. This way, if you forget to add the END_CATCH,
then compilation fails due to the unbalanced curly braces.
This caught a couple places where we were missing END_CATCH in current
master, also fixed by the patch.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (complete_command): Add missing END_CATCH.
* common/common-exceptions.h (TRY): Open an outermost scope.
Expand intro comment.
(CATCH): Reindent.
(END_CATCH): Close the outermost scope.
* completer.c (complete_line_internal): Add missing END_CATCH.
This commit adds new "set/show cwd" commands, which are used to
set/show the current working directory of the inferior that will be
started.
The idea here is that "set cwd" will become the de facto way of
setting the inferior's cwd. Currently, the user can use "cd" for
that, but there are side effects: with "cd", GDB also switches to
another directory, and that can impact the loading of scripts and
other files. With "set cwd", we separate the logic into a new
command.
To maintain backward compatibility, if the user issues a "cd" command
but doesn't use "set cwd", then the inferior's cwd will still be
changed according to what the user specified. However, "set cwd" has
precedence over "cd", so it can always be used to override it.
"set cwd" works in the following way:
- If the user sets the inferior's cwd by using "set cwd", then this
directory is saved into current_inferior ()->cwd and is used when
the inferior is started (see below).
- If the user doesn't set the inferior's cwd by using "set cwd", but
rather use the "cd" command as before, then this directory is
inherited by the inferior because GDB will have chdir'd into it.
On Unix-like hosts, the way the directory is changed before the
inferior execution is by expanding the user set directory before the
fork, and then "chdir" after the call to fork/vfork on
"fork_inferior", but before the actual execution. On Windows, the
inferior cwd set by the user is passed directly to the CreateProcess
call, which takes care of the actual chdir for us.
This way, we'll make sure that GDB's cwd is not affected by the user
set cwd.
gdb/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (New commands): Mention "set/show cwd".
* cli/cli-cmds.c (_initialize_cli_cmds): Mention "set cwd" on
"cd" command's help text.
* common/common-inferior.h (get_inferior_cwd): New prototype.
* infcmd.c (inferior_cwd_scratch): New global variable.
(set_inferior_cwd): New function.
(get_inferior_cwd): Likewise.
(set_cwd_command): Likewise.
(show_cwd_command): Likewise.
(_initialize_infcmd): Add "set/show cwd" commands.
* inferior.h (class inferior) <cwd>: New field.
* nat/fork-inferior.c: Include "gdb_tilde_expand.h".
(fork_inferior): Change inferior's cwd before its execution.
* windows-nat.c (windows_create_inferior): Pass inferior's cwd
to CreateProcess.
gdb/gdbserver/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* inferiors.c (current_inferior_cwd): New global variable.
(get_inferior_cwd): New function.
* inferiors.h (struct process_info) <cwd>: New field.
gdb/doc/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Starting your Program) <The working directory.>:
Mention new "set cwd" command.
(Working Directory) <Your Program's Working Directory>:
Rephrase to explain that "set cwd" exists and is the default
way to change the inferior's cwd.
gdb/testsuite/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/set-cwd.c: New file.
* gdb.base/set-cwd.exp: Likewise.
Tom Tromey
Tom Tromey
Simon Marchi
Eli Zaretskii
Joel Brobecker
Christian Biesinger
Philippe Waroquiers
Pedro Alves
Tom de Vries
Jan Vrany
Andrew Burgess
Kevin Buettner
Simon Marchi
Sergio Durigan Junior