Remove regcache_raw_write, update all callers to use regcache::raw_write
instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_write): Remove, update callers to use
regcache::raw_write instead.
* regcache.c (regcache_raw_write): Remove.
Make the `mask_address_var' variable static, it is not used outside
mips-tdep.c and having no target name embedded within it causes a risk
of a namespace clash.
gdb/
* mips-tdep.c (mask_address_var): Make variable static.
Select `bfd_mach_mips4000', which corresponds to the MIPS III ISA, the
earlies with 64-bit support, whenever a 32-bit BFD architecture has been
chosen to use with a 64-bit ABI. The situation can happen in a few
cases:
1. When the user has used `set architecture' or `set mips abi' commands
to override automatic selection and then starts a debug session by
requesting to run, attach or connect to a target.
2. In native debugging when reattaching to a previously debugged process
where the program to be debugged has been since discarded, as
observed with:
FAIL: gdb.base/attach.exp: attach2, with no file (GDB internal error)
in n32 and n64 regression testing.
3. In remote debugging with a non-XML debug stub when discarding the
program to be debugged while connected to the remote target, as
observed with:
FAIL: gdb.base/break-unload-file.exp: cmdline: always-inserted on: break: file (GDB internal error)
in n32 and n64 regression testing.
In the latter two cases the ABI, quite rightfully, is retained while the
program to be debugged is discarded. This is because in that case the
ABI previously determined is carried over along with `gdbarch' in use,
which is retained. The BFD architecture is however discarded and the
default then applies, because it is not attached to `gdbarch'.
In all these cases we trip with an internal error message as follows:
.../gdb/mips-tdep.c:766: internal-error: bad register size
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
This is a bug, please report it. For instructions, see:
<http://www.gnu.org/software/gdb/bugs/>.
coming from `mips_pseudo_register_read', because the raw register width
inferred from the BFD architecture turns out to be 4 for the general
registers while the cooked register width inferred from the ABI in
effect is 8.
We do not hit this internal error in remote debugging with an XML debug
stub, because in that case raw register width information is passed by
the stub along with the XML target description.
Ultimately I think we ought to make the BFD architecture sticky like the
ABI, however in the interim this simple fix will do, removing the error
across all three cases. The case where the user has used `set mips abi'
or `set architecture' commands has to be handled anyway, and although a
more sophisticated solution could be envisaged, such as reporting an
error with the respective `set' command, I think this is too much of a
corner case to bother.
gdb/
* mips-tdep.c (mips_gdbarch_init): Don't use a 32-bit BFD
architecture with a 64-bit ABI.
Move ABI determination code ahead of target description loading so that
architecture information can be adjusted according to the ABI selected,
and then used in OS dependent register information initialization needed
for target description processing. No functional change.
gdb/
* gdb/mips-tdep.c (mips_gdbarch_init): Reorder ABI determination
ahead of target description loading.
We can pass readable_regcache to gdbarch method read_pc where it is
allowed to do read from regcache.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* avr-tdep.c (avr_read_pc): Change parameter type to
readable_regcache.
* gdbarch.sh (read_pc): Likewise.
* gdbarch.c: Re-generated.
* gdbarch.h: Re-generated.
* hppa-tdep.c (hppa_read_pc): Change parameter type to
readable_regcache.
* ia64-tdep.c (ia64_read_pc): Likewise.
* mips-tdep.c (mips_read_pc): Likewise.
* spu-tdep.c (spu_read_pc): Likewise.
pseudo registers are either from raw registers or memory, so
gdbarch methods pseudo_register_read and pseudo_register_read_value
should have regcache object which only have read methods. In other
words, we should disallow writing to regcache in these two gdbarch
methods. In order to apply this restriction, this patch adds a new
class readable_regcache, derived from reg_buffer, and it only has
raw_read and cooked_read methods. regcache is derived from
readable_regcache. This patch also passes readable_regcache instead of
regcache to gdbarch methods pseudo_register_read and
pseudo_register_read_value.
This patch moves raw_read* and cooked_read* methods to readable_regcache,
which is straightforward. One thing not straightforward is that I split
regcache::xfer_part to readable_regcache::read_part and regcache::write_part,
because readable_regcache can only have methods to read.
readable_regcache is an abstract base class, and it has a pure virtual
function raw_update, because I don't want readable_regcache know where
these raw registers are from. They can be from either the target
(readwrite regcache) or the regcache itself (readonly regcache).
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_pseudo_register_read_value): Change
parameter type to 'readable_regcache *'.
* amd64-tdep.c (amd64_pseudo_register_read_value): Likewise.
* arm-tdep.c (arm_neon_quad_read): Likewise.
(arm_pseudo_read): Likewise.
* avr-tdep.c (avr_pseudo_register_read): Likewise.
* bfin-tdep.c (bfin_pseudo_register_read): Likewise.
* frv-tdep.c (frv_pseudo_register_read): Likewise.
* gdbarch.c: Re-generated.
* gdbarch.h: Re-generated.
* gdbarch.sh (pseudo_register_read): Change parameter type to
'readable_regcache *'.
(pseudo_register_read_value): Likewise.
* h8300-tdep.c (pseudo_from_raw_register): Likewise.
(h8300_pseudo_register_read): Likewise.
* hppa-tdep.c (hppa_pseudo_register_read): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_pseudo_register_read_into_value): Likewise.
(i386_pseudo_register_read_value): Likewise.
* i386-tdep.h (i386_pseudo_register_read_into_value): Update
declaration.
* ia64-tdep.c (ia64_pseudo_register_read): Likewise.
* m32c-tdep.c (m32c_raw_read): Likewise.
(m32c_read_flg): Likewise.
(m32c_banked_register): Likewise.
(m32c_banked_read): Likewise.
(m32c_sb_read): Likewise.
(m32c_part_read): Likewise.
(m32c_cat_read): Likewise.
(m32c_r3r2r1r0_read): Likewise.
(m32c_pseudo_register_read): Likewise.
* m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read): Likewise.
(mep_pseudo_cr64_read): Likewise.
(mep_pseudo_register_read): Likewise.
* mips-tdep.c (mips_pseudo_register_read): Likewise.
* msp430-tdep.c (msp430_pseudo_register_read): Likewise.
* nds32-tdep.c (nds32_pseudo_register_read): Likewise.
* regcache.c (regcache::raw_read): Move it to readable_regcache.
(regcache::cooked_read): Likewise.
(regcache::cooked_read_value): Likewise.
(regcache_cooked_read_signed):
(regcache::cooked_read): Likewise.
* regcache.h (readable_regcache): New class.
(regcache): Inherit readable_regcache. Move some methods to
readable_regcache.
* rl78-tdep.c (rl78_pseudo_register_read): Change
parameter type to 'readable_regcache *'.
* rs6000-tdep.c (do_regcache_raw_read): Remove.
(e500_pseudo_register_read): Change parameter type to
'readable_regcache *'.
(dfp_pseudo_register_read): Likewise.
(vsx_pseudo_register_read): Likewise.
(efpr_pseudo_register_read): Likewise.
* s390-tdep.c (s390_pseudo_register_read): Likewise.
* sh-tdep.c (sh_pseudo_register_read): Likewise.
* sh64-tdep.c (pseudo_register_read_portions): Likewise.
(sh64_pseudo_register_read): Likewise.
* sparc-tdep.c (sparc32_pseudo_register_read): Likewise.
* sparc64-tdep.c (sparc64_pseudo_register_read): Likewise.
* spu-tdep.c (spu_pseudo_register_read_spu): Likewise.
(spu_pseudo_register_read): Likewise.
* xtensa-tdep.c (xtensa_register_read_masked): Likewise.
(xtensa_pseudo_register_read): Likewise.
The patch later in this series will move regcache's raw_read and
cooked_read methods to a new class regcache_read, and regcache is
dervied from it. Also pass regcache_read instead of regcache to gdbarch
methods pseudo_register_read and pseudo_register_read_value. In order
to prepare for this change, this patch changes regcache_raw_read to
regcache->raw_read. On the other hand, since we are in C++, I prefer
using class method (regcache->raw_read).
gdb:
2018-01-22 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_pseudo_read_value): Call regcache
method raw_read instead of regcache_raw_read.
* amd64-tdep.c (amd64_pseudo_register_read_value): Likewise.
* arm-tdep.c (arm_neon_quad_read): Likewise.
* avr-tdep.c (avr_pseudo_register_read): Likewise.
* bfin-tdep.c (bfin_pseudo_register_read): Likewise.
* frv-tdep.c (frv_pseudo_register_read): Likewise.
* h8300-tdep.c (h8300_pseudo_register_read): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_pseudo_register_read_into_value): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read): Likewise.
* msp430-tdep.c (msp430_pseudo_register_read): Likewise.
* nds32-tdep.c (nds32_pseudo_register_read): Likewise.
* rl78-tdep.c (rl78_pseudo_register_read): Likewise.
* s390-linux-tdep.c (s390_pseudo_register_read): Likewise.
* sparc-tdep.c (sparc32_pseudo_register_read): Likewise.
* sparc64-tdep.c (sparc64_pseudo_register_read): Likewise.
* spu-tdep.c (spu_pseudo_register_read_spu): Likewise.
* xtensa-tdep.c (xtensa_pseudo_register_read): Likewise.
This adds target_float_to_string and target_float_from_string,
which dispatch to the corresponding floatformat_ or decimal_ routines.
Existing users of those routines are changed to use the new
target-float routines instead (most of those places already handle
both binary and decimal FP).
In addition, two other places are changes to use target_float_from_string:
- define_symbol in stabsread.c, when parsing a floating-point literal
from stabs debug info
- gdbarch-selftest.c when initializing a target format values (to
eliminate use of DOUBLEST there).
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* target-float.c (target_float_to_string): New function.
(target_float_from_string): New function.
* target-float.h (target_float_to_string): Add prototype.
(target_float_from_string): Add prototype.
* valprint.c: Include "target-float.h". Do not include
"doublest.h" and "dfp.h".
(print_floating): Use target_float_to_string.
* printcmd.c: Include "target-float.h". Do not include "dfp.h".
(printf_floating): Use target_float_to_string.
* i387-tdep.c: Include "target-float.h". Do not include "doublest.h".
(print_i387_value): Use target_float_to_string.
* mips-tdep.c: Include "target-float.h".
(mips_print_fp_register): Use target_float_to_string.
* sh64-tdep.c: Include "target-float.h".
(sh64_do_fp_register): Use target_float_to_string.
* parse.c: Include "target-float.h". Do not include
"doublest.h" and "dfp.h".
(parse_float): Use target_float_from_string.
* stabsread.c: Include "target-float.h". Do not include "doublest.h".
(define_symbol): Use target_float_from_string.
* gdbarch-selftests.c: Include "target-float.h".
(register_to_value_test): Use target_float_from_string.
A few tdep files use target-specific printing routines to output values in
the floating-point registers. To get rid of host floating-point code,
this patch changes them to use floatformat_to_string instead.
No functional change intended, the resulting output should look the same.
ChangeLog:
2017-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* i387-tdep.c (print_i387_value): Use floatformat_to_string.
* sh64-tdep.c (sh64_do_fp_register): Likewise.
* mips-tdep.c (mips_print_fp_register): Likewise.
As a first small step to getting rid of doublest.h, this patch removes the
include of "floatformat.h" in "doublest.h". This is actually not needed
for the file itself. A few source files now need to include "floatformat.h"
directly, since they got it indirectly via "doublest.h" and still need it.
In reviewing which files need it, I found a number of files that include
"floatformat.h" directly without actually needing it at all. Similarly,
a number of files include "doublest.h" without needing it. I've also
removed those unnecessary include statements.
gdb/ChangeLog:
2017-10-05 Ulrich Weigand <uweigand@de.ibm.com>
* doublest.h: Do not include "floatformat.h". Remove stale comments.
* gdbtypes.c: Include "floatformat.h".
* value.c: Likewise.
* m68k-tdep.c: Likewise.
* findvar.c: Do not include "floatformat.h".
* amd64-darwin-tdep.c: Likewise.
* arm-linux-tdep.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* m68k-linux-tdep.c: Likewise.
* mep-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* s390-linux-tdep.c: Likewise.
* sparc-obsd-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* vax-tdep.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-tdep.c: Likewise.
* top.c: Do not include "doublest.h".
* aarch64-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* arm-linux-tdep.c: Likewise.
* m68k-linux-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* xstormy16-tdep.c: Likewise.
As an update to commit ede5f15146 ("gdbarch.h: Change
gdbarch_info::tdep_info's type to void *") replace the definition of the
`tdep_info' member in `struct gdbarch_info' with an anonymous union,
comprising the original member, with its type reverted to `struct
gdbarch_tdep_info *', a `tdesc_data' member of a `struct tdesc_arch_data
*' type and an `id' member of an `int *' type. Remove now unnecessary
casts throughout use places then, making code easier to read an less
prone to errors, which may happen with casting.
gdb/
* gdbarch.sh (gdbarch_info): Replace the `tdep_info' member with
a union of `tdep_info', `tdesc_data' and `id'.
* aarch64-tdep.c (aarch64_gdbarch_init): Use `info.tdesc_data'
rather than `info.tdep_info'.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* i386-tdep.c (i386_gdbarch_init): Likewise.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Use `info.id' rather than
`info.tdep_info'.
(ppc_linux_init_abi): Use `info.tdesc_data' rather than
`info.tdep_info'.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* spu-multiarch.c (spu_gdbarch): Use `info.id' rather than
`info.tdep_info'.
* spu-tdep.c (spu_gdbarch_init): Likewise.
* gdbarch.h: Regenerate.
Replace chains of conditional expressions used in target-dependent MIPS
`gdbarch' debug output to get a textual name of the FPU type with calls
to a helper decoder function, improving code readability. No functional
change.
gdb/
* mips-tdep.c (mips_fpu_type_str): New function.
(mips_dump_tdep): Call it.
Complement commit 74ed0bb414 ("Replace current_gdbarch in *mips*"),
<https://sourceware.org/ml/gdb-patches/2008-06/msg00490.html>, and
consistently use the MIPS_FPU_TYPE macro to access the `->mips_fpu_type'
target-dependent `gdbarch' member. No functional change.
gdb/
* mips-tdep.c (mips_gdbarch_init): Use MIPS_FPU_TYPE to access
`->mips_fpu_type'.
'info registers' for MIPS throws an error and when it first encounters
an unavailable register. This does not match other architectures
which annotate unavailable registers and continue to print out the
values of subsequent registers. Replace the error by displaying an
aligned "<unavailable>". This string is truncated to "<unavl>" when
displaying a 32-bit register.
gdb/ChangeLog:
* mips-tdep.c (print_gp_register_row): Don't error for unavailable
registers.
This is a follow-up to
[PATCH 0/6] Unify the disassembler selection in gdb and objdump
https://sourceware.org/ml/binutils/2017-05/msg00192.html
that is, opcodes is able to select the right disassembler, so gdb
doesn't have to select them. Instead, gdb can just use
default_print_insn. As a result, these print_insn_XXX are not used
out of opcodes, so this patch also moves their declarations from
include/dis-asm.h to opcodes/disassemble.h. With this change,
GDB doesn't use any print_insn_XXX directly any more.
gdb:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdb_print_insn): Call
default_print_insn instead of print_insn_aarch64.
* arm-tdep.c (gdb_print_insn_arm): Call
default_print_insn instead of print_insn_big_arm
and print_insn_little_arm.
* i386-tdep.c (i386_print_insn): Call default_print_insn
instead of print_insn_i386.
* ia64-tdep.c (ia64_print_insn): Call
default_print_insn instead of print_insn_ia64.
* mips-tdep.c (gdb_print_insn_mips): Call
default_print_insn instead of print_insn_big_mips
and print_insn_little_mips.
* spu-tdep.c (gdb_print_insn_spu): Call default_print_insn
instead of print_insn_spu.
include:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
(print_insn_spu): Likewise.
opcodes:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c: Include disassemble.h instead of dis-asm.h.
* arm-dis.c: Likewise.
* ia64-dis.c: Likewise.
* mips-dis.c: Likewise.
* spu-dis.c: Likewise.
* disassemble.h (print_insn_aarch64): New declaration, moved from
include/dis-asm.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
mips_eabi_push_dummy_call is storing the address of a struct in a
buffer that must have the same of the confisued/set ABI register size.
Add a define for the maximum ABI size and use it to size the local
buffer. Also rename the 'regsize' local to 'abi_regsize' for clarity.
Tested that --enable-targets=all still builds.
gdb/ChangeLog:
2017-06-12 Pedro Alves <palves@redhat.com>
Alan Hayward <alan.hayward@arm.com>
* mips-tdep.c (MAX_MIPS_ABI_REGSIZE): New.
(mips_eabi_push_dummy_call): Rename local 'regsize' to
'abi_regsize'. Rename local array 'valbuf' to 'ref_valbuf', and
use MAX_MIPS_ABI_REGSIZE instead of MAX_REGISTER_SIZE to size it.
Assert that abi_regsize bytes fit in 'ref_valbuf'.
One line was using printf_filtered instead of fprintf_filtered
to the requested file.
gdb/ChangeLog:
* mips-tdep.c (print_gp_register_row): Replace printf_filtered
with fprintf_filtered.
This patch addes class gdb_disassembler, and refactor
code to use it. The gdb_disassembler object is saved
in disassember_info.application_data. However,
disassember_info.application_data is already used by
gdb for arm, mips spu, and scm-disasm. In arm and mips,
.application_data is gdbarch, but we can still get gdbarch
from gdb_disassember.
The use of application_data in spu is a little bit
complicated. It creates its own disassemble_info, and
save spu_dis_asm_data in .application_data. This will
overwrite the pointer to gdb_disassembler, so we need
to find another place to save spu_dis_asm_data. I
extend disassemble_info, and put "id" there.
gdb:
2017-01-26 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: Include "disasm.h".
(gdb_print_insn_arm): Update code to get gdbarch.
* disasm.c (dis_asm_read_memory): Change it to
gdb_disassembler::dis_asm_read_memory.
(dis_asm_memory_error): Likewise.
(dis_asm_print_address): Likewise.
(gdb_pretty_print_insn): Change it to
gdb_disassembler::pretty_print_insn.
(dump_insns): Add one argument gdb_disassemlber. All
callers updated.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
(do_assembly_only): Likewise.
(gdb_disassembler::gdb_disassembler): New.
(gdb_disassembler::print_insn): New.
* disasm.h (class gdb_disassembler): New.
(gdb_pretty_print_insn): Remove declaration.
(gdb_disassemble_info): Likewise.
* guile/scm-disasm.c (class gdbscm_disassembler): New.
(gdbscm_disasm_read_memory_worker): Update.
(gdbscm_disasm_read_memory): Update.
(gdbscm_disasm_memory_error): Remove.
(gdbscm_disasm_print_address): Remove.
(gdbscm_disassembler::gdbscm_disassembler): New.
(gdbscm_print_insn_from_port): Update.
* mips-tdep.c: Include disasm.h.
(gdb_print_insn_mips): Update code to get gdbarch.
* record-btrace.c (btrace_insn_history): Update.
* spu-tdep.c: Include disasm.h.
(struct spu_dis_asm_data): Remove.
(struct spu_dis_asm_info): New.
(spu_dis_asm_print_address): Use spu_dis_asm_info to get
SPU id.
(gdb_print_insn_spu): Cast disassemble_info to
spu_dis_asm_info.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Both of them are used in conversion. We can remove them since the
conversion is done.
There are many architectures only have one breakpoint instruction,
so their gdbarch methods breakpoint_kind_from_pc and
sw_breakpoint_from_kind look very similar. Instead of macro, we
use template "template <size_t, const gdb_byte *> struct bp_manipulation"
for these architectures. In order to use template, I also change
breakpoint instruction of type "static const gdb_byte[]" to
"constexpr gdb_byte[]", and rename them to ARCH_break_insn.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change it to
constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(aarch64_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* alpha-tdep.c (break_insn): Rename to alpha_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(alpha_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arc-tdep.c (arc_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation): New.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation_endian): New.
(BP_MANIPULATION): New.
(BP_MANIPULATION_ENDIAN): New.
* arm-tdep.c (arm_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* avr-tdep.c (avr_break_insn): Change it constexpr.
(avr_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cris-tdep.c (cris_gdbarch_init): Likewise.
* frv-tdep.c (breakpoint): Rename it to frv_break_insn, and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(frv_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* ft32-tdep.c (breakpoint): Rename it to ft32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(ft32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* h8300-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(h8300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* hppa-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(hppa_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* i386-tdep.c (break_insn): Rename it to i386_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(i386_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* iq2000-tdep.c (iq2000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* lm32-tdep.c (breakpoint): Rename it to lm32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(lm32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32c-tdep.c (break_insn): Rename it to m32c_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m32c_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* m68hc11-tdep.c (breakpoint): Rename it to m68hc11_break_insn and
change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68hc11_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m68k-tdep.c (break_insn): Rename it to m68k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m88k-tdep.c (break_insn): Rename it to m88k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m88k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mep-tdep.c (breakpoint): Rename it to mep_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(mep_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* microblaze-tdep.c (break_insn): Rename it to
microblaze_break_insn and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(microblaze_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (breakpoint): Rename it to mn10300_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(mn10300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* moxie-tdep.c (breakpoint): Rename it to moxie_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(moxie_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* msp430-tdep.c (breakpoint): Rename it to msp430_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(msp430_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* nds32-tdep.c (break_insn): Rename it to nds32_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(nds32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* rl78-tdep.c (breakpoint): Rename it to rl78_break_ins
and change its type to rl78_break_insn. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rl78_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rs6000-tdep.c (big_breakpoint): Change its type to
constexpr.
(little_breakpoint): Likewise.
Don't use GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN.
(rs6000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rx-tdep.c (breakpoint): Rename it to rx_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* s390-linux-tdep.c (breakpoint): Rename it to s390_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION
(s390_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* score-tdep.c (score_gdbarch_init): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* sparc-tdep.c (break_insn): Rename it to sparc_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(sparc32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* spu-tdep.c (breakpoint): Rename it to spu_break_insn and change
its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(spu_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* tilegx-tdep.c (breakpoint): Rename it to tilegx_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(tilegx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* vax-tdep.c (break_insn): Rename it to vax_break_insn and
change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(vax_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xstormy16-tdep.c (breakpoint): Rename it to
xstormy16_break_insn and change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(xstormy16_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
This patch adds two gdbarch methods breakpoint_kind_from_pc and
sw_breakpoint_from_kind, and uses target_info.placed_size as "kind"
of the breakpoint. This patch updates the usages of
target_info.placed_size.
The "kind" of a breakpoint is determined by gdbarch rather than
target, so we have gdbarch method breakpoint_kind_from_pc, and we
should set target_info.placed_size out of each implementation of
target to_insert_breakpoint. In this way, each target doesn't have
to set target_info.placed_size any more.
This patch also sets target_info.placed_address before
target_insert_breakpoint too, so that target to_insert_breakpoint
can use it, see record_full_insert_breakpoint.
Before we call target_insert_breakpoint, we set
target_info.placed_address and target_info.placed_size like this,
CORE_ADDR addr = bl->target_info.reqstd_address;
bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr);
bl->target_info.placed_address = addr;
return target_insert_breakpoint (bl->gdbarch, &bl->target_info);
target_insert_breakpoint may fail, but it doesn't matter to the "kind"
and "placed_address" of a breakpoint. They should be determined by
gdbarch.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define
breakpoint_kind_from_pc and sw_breakpoint_from_kind.
(GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Call
set_gdbarch_breakpoint_kind_from_pc and
set_gdbarch_sw_breakpoint_from_kind.
* arm-tdep.c: Add comments.
* bfin-tdep.c: Likewise.
* breakpoint.c (breakpoint_kind): New function.
(insert_bp_location): Set target_info.placed_size and
target_info.placed_address.
(bkpt_insert_location): Likewise.
* cris-tdep.c: Add comments.
* gdbarch.sh (breakpoint_kind_from_pc): New.
(sw_breakpoint_from_kind): New.
* gdbarch.c, gdbarch.h: Regenerated.
* ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set
bp_tgt->placed_size.
(ia64_memory_remove_breakpoint): Don't assert
bp_tgt->placed_size.
(ia64_breakpoint_kind_from_pc): New function.
(ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc.
* m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set
bp_tgt->placed_size.
* mem-break.c (default_memory_insert_breakpoint): Don't set
bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind.
(default_memory_remove_breakpoint): Call
gdbarch_sw_breakpoint_from_kind.
(memory_validate_breakpoint): Don't check bp_tgt->placed_size.
* mips-tdep.c: Add comments.
* mt-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* record-full.c (record_full_insert_breakpoint): Don't call
gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address
and bp_tgt->placed_size.
* remote.c (remote_insert_breakpoint): Don't call
gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size.
Don't set bp_tgt->placed_address and bp_tgt->placed_size.
(remote_insert_hw_breakpoint): Likewise.
* score-tdep.c: Likewise.
* sh-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* v850-tdep.c: Likewise.
* xtensa-tdep.c: Likewise.
This patch adds an enum mips_breakpoint_kind to avoid using magic
numbers as much as possible.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
* mips-tdep.c (mips_breakpoint_kind): New enum.
(mips_breakpoint_from_pc): Use it.
(mips_remote_breakpoint_from_pc): Likewise.
Complement commit f7c382926d ("Remove support for "target m32rsdi" and
"target mips/pmon/ddb/rockhopper/lsi"") and remove dead MIPS target code
which used to support these legacy remote targets.
gdb/
* mips-tdep.c (mips_r3041_reg_names): Remove.
(mips_breakpoint_from_pc): Remove IDT and PMON breakpoint
encodings.
Fix a regression from commit f8b73d13b7 ("Target-described register
support for MIPS"),
<https://sourceware.org/ml/gdb-patches/2007-05/msg00340.html>,
<https://sourceware.org/ml/gdb-patches/2007-06/msg00256.html>, which
caused Floating Point Control Registers (FCRs) to be shown as 64-bit
with 64-bit targets.
This came from the legacy register format where all raw registers
matched the width of the architecture regardless of their actual size.
The correct size was then set in `mips_register_type' for cooked
registers presented to the user, which in the case of FCRs meant the
cooked size was always forced to 32 bits, reflecting their actual
hardware size, even though the raw format carried them in 64-bit
quantities on 64-bit targets. The upper 32 bits carried in the raw FCR
format have always been don't-cares, not actually retrieved from
hardware and never written back.
With the introduction of XML register descriptions the layout of
previously defined raw registers has been preserved, so as to keep
existing register handling code unchanged and make it easier for GDB and
`gdbserver' to interact with each other whether neither, either or both
parties talking over RSP support XML register descriptions. For the
XML-described case however `mips_register_type' is not used in raw to
cooked register conversion, so any special cases coded there are not
taken into account.
Instead a new function, `mips_pseudo_register_type', has been introduced
to handle size conversion, however lacking the special case for FCRs for
the Linux and the now defunct IRIX target. The correct size has been
maintained for embedded targets however, due to the bundling of FCRs
with the embedded registers under the `rawnum >= MIPS_EMBED_FP0_REGNUM +
32' condition.
Add the missing case to `mips_pseudo_register_type' then, referring to
the FCR indices explicitly, and observing that between
`MIPS_EMBED_FP0_REGNUM + 32' and `MIPS_FIRST_EMBED_REGNUM' there is an
unused register slot whose contents are ignored so with the removal of
embedded FCRs from under that condition we don't have to care about it
and we can refer to the embedded registers starting from
MIPS_FIRST_EMBED_REGNUM instead.
Add a test case too so that we have means to check automatically that
the correct user-visible size of FCRs is maintained.
gdb/
* mips-tdep.c (mips_pseudo_register_type): Make FCRs always
32-bit.
gdb/testsuite/
* gdb.arch/mips-fcr.exp: New test.
* gdb.arch/mips-fcr.c: Source for the new test.
Rearrange comments throughout `mips_pseudo_register_type', placing them
ahead the condtionals they apply to consistently.
gdb/
* mips-tdep.c (mips_pseudo_register_type): Rearrange comments
throughout.
Set the number of registers for non-XML-described Linux targets to 90,
reverting a change made here with the addition of DSP register support:
commit 1faeff088b
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Thu Mar 1 22:19:48 2012 +0000
and fixing a regression introduced for legacy `gdbserver' targets
causing a "Remote 'g' packet reply is too long" error message where the
amount of register data received with a `g' packet (90) exceeds the
maximum number of registers expected (79).
Update the setting for XML-described targets, reflecting the actual
number of registers which have been assigned numbers, matching the:
gdb_assert (gdbarch_num_regs (gdbarch) <= MIPS_RESTART_REGNUM);
requirement in `mips_linux_init_abi'.
gdb/
* mips-tdep.c (mips_gdbarch_init): For GDB_OSABI_LINUX set
`num_regs' to 90 rather than 79. Where a target description is
present adjust the setting appropriately.
This removes support for:
| target | source |
|-------------------+-----------------------|
| target m32rsdi | gdb/remote-m32r-sdi.c |
| target mips | gdb/remote-mips.c |
| target pmon | gdb/remote-mips.c |
| target ddb | gdb/remote-mips.c |
| target rockhopper | gdb/remote-mips.c |
| target lsi | gdb/remote-mips.c |
That is:
- Remote M32R debugging over SDI.
- Debugging boards using the MIPS remote debugging protocol
over a serial line, PMON, and a few variants.
These are the last non-"target remote" remote targets in the tree, if
you don't count "target sim".
Refs:
https://sourceware.org/ml/gdb/2016-03/msg00004.htmlhttps://sourceware.org/ml/gdb-patches/2016-03/msg00580.html
gdb/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* NEWS: Mention that support for "target m32rsdi", "target mips",
"target pmon", "target ddb", "target rockhopper", and "target lsi"
was removed.
* Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
remote-mips.o.
(ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
* configure.tgt: Remove all references to remote-m32r-sdi.o and
remote-mips.o.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
function.
* mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
declaration.
* remote-m32r-sdi.c, remote-mips.c: Delete files.
* symfile.c (generic_load, generic_load): Remove comments.
gdb/doc/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* gdb.texinfo (M32R/SDI): Delete node.
(MIPS Embedded): Remove references to the MIPS remote debugging
protocol, PMON and variants, and the associated commands.
Simon Marchi