If you run an infcall from the command line, and immediately after run
some other command, GDB incorrectly processes the other command before
the infcall finishes.
The problem is that the fix for PR gdb/20418 (Problems with
synchronous commands and new-ui, git 3eb7562a98) moved the
add_file_handler/delete_file_handler calls out of
target_terminal_$foo, and missed adjusting the infcall code.
gdb/ChangeLog:
2016-09-28 Pedro Alves <palves@redhat.com>
* infcall.c (run_inferior_call): Remove input from the event
loop while running the infcall.
gdb/testsuite/ChangeLog:
2016-09-28 Pedro Alves <palves@redhat.com>
* gdb.base/infcall-input.c: New file.
* gdb.base/infcall-input.exp: New file.
I was reading the gdb RSP manual recently and I found a number of
small problems in the documentation. This patch attempts to improve
these areas. Specfically:
* The term "memory breakpoint" is used only in this section of the
manual, and there inconsistently. I found this term confusing --
initially I thought it might be a watchpoint. This patch changes it
to use the term "software breakpoint", which is used in the rest of
the manual.
* The z0 packet didn't document how "kind" was written. And, it had a
stray link to the architecture-specific protocol details node. This
patch moves this link to a better spot.
* The z1 patch didn't document that it accepts cmd_list.
* I couldn't find any text saying what response is given to a command
like vCont in non-stop mode. The answer is that OK is sent, and
then a stop reply is sent as a notification. This patch adds a note
about this.
* The "create" stop reply did not document that the "R" argument is
ignored.
* The "W", "X", and "w" packets did not document how the "AA" part is
formatted.
* The %Stop notification example said "%%Stop", but I think this is
incorrect.
2016-09-28 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Packets) <z0>: Use "software breakpoint" rather
than "memory breakpoint". Further document "kind". Move
protocol-details link earlier.
<z1>: Document the cmd_list argument. Fix typo.
<g>: Remove incorrect sentence.
(Stop Reply Packets): Document "OK" response to requests when in
non-stop mode.
<swbreak>: Use "software breakpoint" rather than "memory
breakpoint".
<create>: Document that "R" is ignored.
<W, X, w>: Document formatting of "AA".
(Notification Packets): Use "%Stop", not "%%Stop".
On ARMv6-M and ARMv7-M, the exception return address is sort of magic
address defined by the manual. This patch is to let GDB well handle
these magic addresses.
2016-09-27 Fredrik Hederstierna <fredrik.hederstierna@verisure.com>
* arm-tdep.c (arm_m_addr_is_magic): New function.
(arm_addr_bits_remove): Call arm_m_addr_is_magic.
(arm_m_exception_unwind_sniffer): Likewise.
When I read the GDBserver debug message, I find the "entering" of
linux_wait_1 doesn't match the "existing" of linux_wait_1. Looks
we don't call debug_exit somewhere in linux_wait_1 on return.
gdb/gdbserver:
2016-09-26 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_wait_1): Call debug_exit.
One use of target_mourn_interior seems to have been missed in bc1e6c81
gdb/ChangeLog:
2016-09-23 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (windows_delete_thread): Adjusting call to
target_mourn_inferior to include ptid_t argument.
This patch changes some code in cli-cmds.c to use std::string rather
than dyn-string, removing some cleanups. Since this was the last use
of dyn-string in gdb, this patch also removes
make_cleanup_dyn_string_delete.
2016-09-23 Tom Tromey <tom@tromey.com>
* utils.h (make_cleanup_dyn_string_delete): Remove declaration.
* utils.c: Don't include dyn-string.h.
(do_dyn_string_delete, make_cleanup_dyn_string_delete): Remove.
* cli/cli-cmds.c: Include <string>. Don't include dyn-string.h.
(argv_to_string): Rename. Change return type to std::string.
(alias_command): Use std::string.
This patch changes a spot in objfiles.c to use a std::vector, removing
a cleanup.
2016-09-23 Tom Tromey <tom@tromey.com>
* objfiles.c: Include <vector>.
(objfile_relocate): Use std::vector.
This patch changes some spots in rust-lang.c to use std::string or
std::vector, removing some cleanups.
2016-09-23 Tom Tromey <tom@tromey.com>
* rust-lang.c: Include <string> and <vector>.
(rust_evaluate_funcall): Use std::vector, std::string.
(rust_evaluate_subexp): Use std::string.
(rust_lookup_symbol_nonlocal): Use std::string.
This changes a few spots in cp-namespace.c to use std::string,
removing some cleanups.
2016-09-23 Tom Tromey <tom@tromey.com>
* cp-namespace.c: Include <string>.
(cp_search_static_and_baseclasses)
(cp_lookup_symbol_imports_or_template, find_symbol_in_baseclass):
Use std::string.
This changes one spot in break-catch-sig.c to use std::string,
removing some cleanups.
2016-09-23 Tom Tromey <tom@tromey.com>
* break-catch-sig.c: Include <string>.
(signal_catchpoint_print_one): Use std::string.
This patch removes some unnecessary code. In particular,
terminate_minimal_symbol_table is declared in minsyms.h, so it doesn't
need to be declared in objfiles.h as well. And,
restore_ui_out_closure was rendered unnecessary by an earlier patch,
so the structure definition can be removed now.
I'm checking this in as obvious.
Tested by rebuilding on x86-64 Fedora 24 with --enable-targets=all;
which would notice any missing includes of minsyms.h.
2016-09-23 Tom Tromey <tom@tromey.com>
* utils.c (struct restore_ui_out_closure): Remove.
* objfiles.h (terminate_minimal_symbol_table): Don't declare.
I see the following build warning when I build GDB with GCC trunk.
../../binutils-gdb/gdb/nat/linux-osdata.c: In function ‘LONGEST linux_xfer_osdata_fds(gdb_byte*, ULONGEST, ULONGEST)’:
../../binutils-gdb/gdb/nat/linux-osdata.c:767:1: error: ‘%s’ directive writing between 0 and 255 bytes into a region of size 11 [-Werror=format-length=]
linux_xfer_osdata_fds (gdb_byte *readbuf,
^~~~~~~~~~~~~~~~~~~~~
../../binutils-gdb/gdb/nat/linux-osdata.c:800:51: note: format output between 7 and 262 bytes into a destination of size 17
sprintf (procentry, "/proc/%s", dp->d_name);
^
../../binutils-gdb/gdb/nat/linux-osdata.c: In function ‘LONGEST linux_xfer_osdata_threads(gdb_byte*, ULONGEST, ULONGEST)’:
../../binutils-gdb/gdb/nat/linux-osdata.c:555:1: error: ‘%s’ directive writing between 0 and 255 bytes into a region of size 11 [-Werror=format-length=]
linux_xfer_osdata_threads (gdb_byte *readbuf,
^~~~~~~~~~~~~~~~~~~~~~~~~
../../binutils-gdb/gdb/nat/linux-osdata.c:588:51: note: format output between 7 and 262 bytes into a destination of size 17
sprintf (procentry, "/proc/%s", dp->d_name);
^
cc1plus: all warnings being treated as errors
The warning is a false positive, but we can workaround it by replacing
sprintf with xsnprintf. On the other hand, it is always preferred to
use xsnprintf.
gdb:
2016-09-23 Yao Qi <yao.qi@linaro.org>
* nat/linux-osdata.c (linux_xfer_osdata_threads): Replace
sprintf with xsnprintf.
(linux_xfer_osdata_fds): Likewise.
If xmalloc fails allocating memory, usually because something tried a
huge allocation, like xmalloc(-1) or some such, GDB asks the user what
to do:
.../src/gdb/utils.c:1079: internal-error: virtual memory exhausted.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
If the user says "n", that throws a QUIT exception, which is caught by
one of the multiple CATCH(RETURN_MASK_ALL) blocks somewhere up the
stack.
The default implementations of operator new / operator new[] call
malloc directly, and on memory allocation failure throw
std::bad_alloc. Currently, if that happens, since nothing catches it,
the exception escapes out of main, and GDB aborts from unhandled
exception.
This patch replaces the default operator new variants with versions
that, just like xmalloc:
#1 - Raise an internal-error on memory allocation failure.
#2 - Throw a QUIT gdb_exception, so that the exact same CATCH blocks
continue handling memory allocation problems.
A minor complication of #2 is that operator new can _only_ throw
std::bad_alloc, or something that extends it:
void* operator new (std::size_t size) throw (std::bad_alloc);
That means that if we let a gdb QUIT exception escape from within
operator new, the C++ runtime aborts due to unexpected exception
thrown.
So to bridge the gap, this patch adds a new gdb_quit_bad_alloc
exception type that inherits both std::bad_alloc and gdb_exception,
and throws _that_.
If we decide that we should be catching memory allocation errors in
fewer places than all the places we currently catch them (everywhere
we use RETURN_MASK_ALL currently), then we could change operator new
to throw plain std::bad_alloc then. But I'm considering such a change
as separate matter from this one -- it'd make sense to do the same to
xmalloc at the same time, for instance.
Meanwhile, this allows using new/new[] instead of xmalloc/XNEW/etc.
without losing the "virtual memory exhausted" internal-error
safeguard.
Tested on x86_64 Fedora 23.
gdb/ChangeLog:
2016-09-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/new-op.c.
(COMMON_OBS): Add common/new-op.o.
(new-op.o): New rule.
* common/common-exceptions.h: Include <new>.
(struct gdb_quit_bad_alloc): New type.
* common/new-op.c: New file.
gdb/gdbserver/ChangeLog:
2016-09-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/new-op.c.
(OBS): Add common/new-op.o.
(new-op.o): New rule.
In commit 6423214f (testsuite: Don't use expect_background to reap
gdbserver), we override gdb_exit in lib/gdbserver-support.exp, so
that we can close gdbserver first. However, we don't close gdbserver
in mi_gdb_exit. This makes a problem in my aarch64 mulit-arch testing,
in which I run some mi tests, mi-watch.exp for example, in different
variations (aarch64 and arm),
Schedule of variations:
junor0-2
junor0-2-arm/-marm
junor0-2-arm/-mthumb
When the test is done in the first variation (aarch64), test case is
recompiled for arm, but GDBserver with aarch64 program is still
running. When the second variation is started, GDB loads arm program,
but GDBserver still loads aarch64 program because the old GDBserver
process is using it. We'll get,
47-target-select remote junor0-2:2350^M
&"warning: Selected architecture arm is not compatible with reported target architecture aarch64\n"^M
&"warning: Architecture rejected target-supplied description\n"
This patch fixes this problem by closing GDBserver in mi_gdb_exit.
gdb/testsuite:
2016-09-22 Yao Qi <yao.qi@linaro.org>
* lib/gdbserver-support.exp: Rename mi_gdb_exit.
(gdb_exit): Rename it to ...
(gdbserver_gdb_exit): ... Close GDBserver.
(gdb_exit): New proc, call gdbserver_gdb_exit.
(mi_gdb_exit): Likewise.
I was notified by buildbot that my patch (commit 6ec2b2) has broken the build
on x86_64:
../../binutils-gdb/gdb/rs6000-tdep.c: In function int ppc_process_record_op31(gdbarch*, regcache*, CORE_ADDR, uint32_t):
../../binutils-gdb/gdb/rs6000-tdep.c:4705:50: error: cannot convert CORE_ADDR* {aka long unsigned int*} to ULONGEST* {aka long long unsigned int*} for argument 3 to register_status regcache_raw_read_unsigned(regcache*, int, ULONGEST*)
tdep->ppc_gp0_regnum + PPC_RA (insn), &ea);
^
../../binutils-gdb/gdb/rs6000-tdep.c:4718:50: error: cannot convert CORE_ADDR* {aka long unsigned int*} to ULONGEST* {aka long long unsigned int*} for argument 3 to register_status regcache_raw_read_unsigned(regcache*, int, ULONGEST*)
tdep->ppc_gp0_regnum + PPC_RA (insn), &ea);
^
The patch below should fix it.
gdb/ChangeLog:
2016-09-22 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (ppc_process_record_op31): Fix
regcache_raw_read_unsigned call using the correct parameter type.
This patch is to make remote-gdbserver-on-localhost.exp use gdbserver-base
and remove duplicated code.
gdb/testsuite:
2016-09-22 Yao Qi <yao.qi@linaro.org>
* boards/gdbserver-base.exp (gdb_server_prog): Set the absolute
path.
* boards/remote-gdbserver-on-localhost.exp: Use gdbserver-base.
Remove duplication.
Replace printf ("%p") with printf ("%s", host_address_to_string ()). Printing
host addrss might make sense here because pointers can be null and this would
affect how function behaves.
This particular warning is printed only when option -Wari is passed to
contrib/ari/gdb_ari.sh
gdb/ChangeLog:
* arc-tdep.c: Fix ARI warning for printf(%p).
In lib/gdbserver-support.exp, we rename gdb_exit to
gdbserver_orig_gdb_exit, but we check the existence gdbserver_gdb_exit.
We should check gdbserver_orig_gdb_exit instead. Looks it is a typo
or an oversight.
gdb/testsuite:
2016-09-22 Yao Qi <yao.qi@linaro.org>
* lib/gdbserver-support.exp: Check the existence of
gdbserver_orig_gdb_exit rather than gdbserver_gdb_exit.
ARC is a family of licensable processors developed by Synopsys.
This is an initial patch that doesn't yet support some of the features, that
are already available in Synopsys' fork of GDB, namely:
* longjmp support
* signal frame handling
* prologue analysis
* Linux targets support
* native Linux support
ARC cores are configurable and extensible, which means from debugger
perspective that some registers and debug capabilities are optional, therefore
it is up to the GDB stub to determine exact list of register available on
target and supply it to GDB via XML target descriptions. List of registers
that is known to GDB and is required is intentionally kept small to simplify
requirements to GDB stub and implementation of a GDB client.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add arc-tdep.o.
(HFILES_NO_SRCDIR): Add arc-tdep.h.
(ALLDEPFILES): Add arc-tdep.c.
* NEWS: Mention new ARC port.
* configure.tgt: Add ARC.
* arc-tdep.c: New file.
* arc-tdep.h: New file.
* features/Makefile (XMLTOC): Add arc-v2.xml and arc-arcompact.xml.
* features/arc-v2.xml: New file.
* features/arc-v2.c: New file (generated).
* features/arc-arcompact.xml: New file.
* features/arc-arcompact.c: New file (generated).
gdb/doc/ChangeLog:
* gdb.texinfo (Embedded Processors): Document ARC.
(Synopsys ARC): New section.
(Standard Target Features): Document ARC features.
(ARC Features): New section.
gdb/testsuite/ChangeLog:
* gdb.xml/tdesc-regs.exp: set core-regs for arc*-*-elf32.
some instruction handlers in ppc_process_record_op63() seem to be missing
return or incorrectly using break. This patch aims to fix that.
gdb/ChangeLog:
2016-09-21 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (ppc_process_record_op63): Fix return of instruction
handlers.
This fixes PR gdb/20604. The bug here is that passing an invalid
expression to "quit" -- e.g., "quit()" -- causes gdb to enter a
non-functioning state.
The immediate problem is that quit_force resets the terminal before
evaluating the expression. However, it seemed to me that it doesn't
really make sense to pass the quit_force argument to kill_or_detach
(which passes it to to_detach), first because conflating the exit
status for "quit" and the signal to pass when detaching doesn't make
sense, and second because to_detach implementations generally only
accept a constant here, while "quit" accepts an expression. So, I
removed that.
As an aside, I think the "detach SIGNO" functionality is not
documented.
Built and regtested on x86-64 Fedora 24.
2016-09-21 Tom Tromey <tom@tromey.com>
PR gdb/20604:
* top.h (quit_force): Update.
* top.c (quit_force): Changed type of first argument. Don't
evaluate expression. Pass NULL to kill_or_detach.
* cli/cli-cmds.c (quit_command): Evaluate "args".
2016-09-21 Tom Tromey <tom@tromey.com>
PR gdb/20604:
* gdb.base/quit.exp: New file.
This patch adds a bunch of generated files to gdb's gitignore files.
There are still a bunch of "stamp" files that are not ignored, but I
think the rule for them should be put in the top-level gitignore.
Users and developers are encouraged to build out-of-tree, but some
people prefer the simplicity to build in-tree, so it should be useful
for them.
gdb/ChangeLog:
* .gitignore: Ignore more files.
* data-directory/.gitignore: Likewise.
gdb/doc/ChangeLog:
* .gitignore: New file.
gdb/gdbserver/ChangeLog:
* .gitinore: Ignore more files.
gdb/testsuite/ChangeLog:
* .gitignore: New file.
Correct a commit 2151ccc56c ("Always organize test artifacts in a
directory hierarchy") regression causing:
Running .../gdb/testsuite/gdb.arch/mips16-thunks.exp ...
gdb compile failed, Assembler messages:
Fatal error: can't create .../gdb/testsuite/gdb.arch/mips16-thunks-inmain.o: No such file or directory
gdb compile failed, Assembler messages:
Fatal error: can't create .../gdb/testsuite/gdb.arch/mips16-thunks-main.o: No such file or directory
gdb compile failed, mips-mti-linux-gnu-gcc: error: .../gdb/testsuite/gdb.arch/mips16-thunks-inmain.o: No such file or directory
mips-mti-linux-gnu-gcc: error: .../gdb/testsuite/gdb.arch/mips16-thunks-main.o: No such file or directory
UNSUPPORTED: gdb.arch/mips16-thunks.exp: No MIPS16 support in the toolchain.
by using `standard_output_file' to construct output file names
throughout.
gdb/testsuite/
* gdb.arch/mips16-thunks.exp: Use `standard_output_file'
throughout.
In patch https://sourceware.org/ml/gdb-patches/2016-04/msg00529.html
I cleared reserved bits when reading CPSR. It makes a problem that
these bits (zero) are written back to kernel through ptrace, and it
changes the state of the processor on some recent kernel, which is
unexpected.
In this patch, I keep these reserved bits when write CPSR back to
hardware.
gdb:
2016-09-21 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.c (aarch32_gp_regcache_collect): Keep
bits 20 to 23.
gdb/gdbserver:
2016-09-21 Yao Qi <yao.qi@linaro.org>
* linux-aarch32-low.c (arm_fill_gregset): Keep bits 20 to
23.
I tried building gdb with -Wduplicated-cond. This patch fixes the
simpler issue that was found.
In Python 3, "int" and "long" are synonyms, so code like:
else if (PyLong_Check (obj))
...
else if (PyInt_Check (obj))
.... will trigger this warning. The fix is to conditionalize the
PyInt_Check branches on Python 2.
Tested by rebuilding, with both version of Python, on x86-64 Fedora 24.
2016-09-20 Tom Tromey <tom@tromey.com>
* python/py-value.c (convert_value_from_python): Make PyInt_Check
conditional on Python 2.
* python/py-arch.c (archpy_disassemble): Make PyInt_Check
conditional on Python 2.
gdb/ChangeLog
2016-09-20 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (ppc_process_record_op31): Fix record of Store String
Word instructions.
Pedro pointed out a regression happening on gdb.mi/mi-exec-run.exp,
and as it turned out, this was a thinko when dealing with some events
on startup_inferior. Basically, one needs to pass 'event_ptid' to
target_mourn_inferior, but I mistakenly passed 'resume_ptid'.
This commit fixes it.
Built and regtested on BuildBot, now with fixed e-mail notifications!
gdb/ChangeLog:
2016-09-20 Sergio Durigan Junior <sergiodj@redhat.com>
* fork-inferior.c (startup_inferior): Pass 'event_ptid' instead of
'resume_ptid' to 'target_mourn_inferior'. Fix regression
introduced by my last commit.
Ref: https://sourceware.org/ml/gdb-patches/2016-09/msg00203.html
The std::{min,max} patch caused build failures when configuring GDB
with with --disable-nls and using GCC 4.1.
The reason is this bit in common/gdb_locale.h:
#ifdef ENABLE_NLS
...
#else
# define gettext(Msgid) (Msgid)
...
#endif
This causes problems if the <libintl.h> header is first included at
any point after "gdb_locale.h".
Specifically, the gettext&co declarations in libintl.h:
extern char *gettext (__const char *__msgid)
__THROW __attribute_format_arg__ (1);
end up broken after preprocessing:
extern char *(__const char *__msgid)
throw () __attribute__ ((__format_arg__ (1)));
After the std::min/std::max change to include <algorithm>, this now
happens with at least the GCC 4.1 copy of <algorithm>, which includes
<libintl.h> via <bits/stl_algobase.h>, <iosfwd>, and
<bits/c++locale.h>.
The fix is to simply remove the troublesome *gettext and *textdomain
macros, leaving only the _ and N_ ones.
gdb/ChangeLog:
2016-09-19 Pedro Alves <palves@redhat.com>
* common/gdb_locale.h [!ENABLE_NLS] (gettext, dgettext, dcgettext,
textdomain, bindtextdomain): Delete macros.
* main.c (captured_main) [!ENABLE_NLS]: Skip bintextdomain and
textdomain calls.
This patch consolidates the API of target_mourn_inferior between GDB
and gdbserver, in my continuing efforts to make sharing the
fork_inferior function possible between both.
GDB's version of the function did not care about the inferior's ptid
being mourned, but gdbserver's needed to know this information. Since
it actually makes sense to pass the ptid as an argument, instead of
depending on a global value directly (which GDB's version did), I
decided to make the generic API to accept it. I then went on and
extended all calls being made on GDB to include a ptid argument (which
ended up being inferior_ptid most of the times, anyway), and now we
have a more sane interface.
On GDB's side, after talking to Pedro a bit about it, we decided that
just an assertion to make sure that the ptid being passed is equal to
inferior_ptid would be enough for now, on the GDB side. We can remove
the assertion and perform more operations later if we ever pass
anything different than inferior_ptid.
Regression tested on our BuildBot, everything OK.
I'd appreciate a special look at gdb/windows-nat.c's modification
because I wasn't really sure what to do there. It seemed to me that
maybe I should build a ptid out of the process information there, but
then I am almost sure the assertion on GDB's side would trigger.
gdb/ChangeLog:
2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
* darwin-nat.c (darwin_kill_inferior): Adjusting call to
target_mourn_inferior to include ptid_t argument.
* fork-child.c (startup_inferior): Likewise.
* gnu-nat.c (gnu_kill_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_kill): Likewise.
* infrun.c (handle_inferior_event_1): Likewise.
* linux-nat.c (linux_nat_attach): Likewise.
(linux_nat_kill): Likewise.
* nto-procfs.c (interrupt_query): Likewise.
(procfs_interrupt): Likewise.
(procfs_kill_inferior): Likewise.
* procfs.c (procfs_kill_inferior): Likewise.
* record.c (record_mourn_inferior): Likewise.
* remote-sim.c (gdbsim_kill): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_kill): Likewise.
* target.c (target_mourn_inferior): Change declaration to accept
new ptid_t argument; use gdb_assert on it.
* target.h (target_mourn_inferior): Move function prototype from
here...
* target/target.h (target_mourn_inferior): ... to here. Adjust it
to accept new ptid_t argument.
* windows-nat.c (get_windows_debug_event): Adjusting call to
target_mourn_inferior to include ptid_t argument.
gdb/gdbserver/ChangeLog:
2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (start_inferior): Call target_mourn_inferior instead of
mourn_inferior; pass ptid_t argument to it.
(resume): Likewise.
(handle_target_event): Likewise.
* target.c (target_mourn_inferior): New function.
* target.h (mourn_inferior): Delete macro.
[...]
.../gdb/s390-linux-nat.c: In function 'void s390_prepare_to_resume(lwp_info*)':
.../gdb/s390-linux-nat.c:703:20: error: 'min' is not a member of 'std'
watch_lo_addr = std::min (watch_lo_addr, area->lo_addr);
[...]
gdb/ChangeLog:
2016-09-18 Pedro Alves <palves@redhat.com>
* s390-linux-nat.c: Include <algorithm>.
Building on a 32-bit host fails currently with errors like:
.../src/gdb/exec.c: In function ‘target_xfer_status section_table_read_available_memory(gdb_byte*, ULONGEST, ULONGEST, ULONGEST*)’:
.../src/gdb/exec.c:801:54: error: no matching function for call to ‘min(ULONGEST, long unsigned int)’
end = std::min (offset + len, r->start + r->length);
^
In file included from /usr/include/c++/5.3.1/algorithm:61:0,
from .../src/gdb/exec.c:46:
/usr/include/c++/5.3.1/bits/stl_algobase.h:195:5: note: candidate: template<class _Tp> const _Tp& std::min(const _Tp&, const _Tp&)
min(const _Tp& __a, const _Tp& __b)
^
/usr/include/c++/5.3.1/bits/stl_algobase.h:195:5: note: template argument deduction/substitution failed:
.../src/gdb/exec.c:801:54: note: deduced conflicting types for parameter ‘const _Tp’ (‘long long unsigned int’ and ‘long unsigned int’)
end = std::min (offset + len, r->start + r->length);
^
In file included from /usr/include/c++/5.3.1/algorithm:61:0,
from .../src/gdb/exec.c:46:
/usr/include/c++/5.3.1/bits/stl_algobase.h:243:5: note: candidate: template<class _Tp, class _Compare> const _Tp& std::min(const _Tp&, const _Tp&, _Compare)
min(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
The problem is that the std::min/std::max function templates use the
same type for both parameters. When the argument types are different,
the compiler can't automatically deduce which template specialization
to pick from the arguments' types.
Fix that by specifying the specialization we want explicitly.
gdb/ChangeLog:
2016-09-18 Pedro Alves <palves@redhat.com>
* breakpoint.c (hardware_watchpoint_inserted_in_range): Explicitly
specify the std:min/std::max specialization.
* exec.c (section_table_read_available_memory): Likewise.
* remote.c (remote_read_qxfer): Likewise.
* target.c (simple_verify_memory): Likewise.
Make a globally available cleanup from a pre-existing one in infrun.c.
This is used in a following patch.
gdb/ChangeLog:
* infrun.c (restore_current_uiout_cleanup): Move to ui-out.c.
(print_stop_event): Use make_cleanup_restore_current_uiout.
* python/python.c (execute_gdb_command): Likewise.
* ui-out.c (restore_current_uiout_cleanup): Move from infrun.c.
(make_cleanup_restore_current_uiout): New function definition.
* ui-out.h (make_cleanup_restore_current_uiout): New function
declaration.
* utils.c (do_restore_ui_out): Remove.
(make_cleanup_restore_ui_out): Remove.
* utils.h (make_cleanup_restore_ui_out): Remove.
Add the function lwp_is_stepping which indicates whether the given LWP
is currently single-stepping. This is a common interface, usable from
native GDB as well as from gdbserver.
gdb/gdbserver/ChangeLog:
* linux-low.c (lwp_is_stepping): New function.
gdb/ChangeLog:
* nat/linux-nat.h (lwp_is_stepping): New declaration.
* linux-nat.c (lwp_is_stepping): New function.
Implement a new function for dumping the S390 "debug
registers" (actually, the PER info) and invoke it at appropriate places.
Respect the variable show_debug_regs and make it settable by the user.
gdb/ChangeLog:
* s390-linux-nat.c (gdbcmd.h): New include.
(s390_show_debug_regs): New function.
(s390_stopped_by_watchpoint): Call it, if show_debug_regs is set.
(s390_prepare_to_resume): Likewise.
(_initialize_s390_nat): Register the command "maint set
show-debug-regs".
Support different sets of watchpoints in multiple inferiors.
gdb/ChangeLog:
* s390-linux-nat.c (watch_areas): Remove variable. Replace by a
member of...
(struct s390_debug_reg_state): ...this. New struct.
(struct s390_process_info): New struct.
(s390_process_list): New variable.
(s390_find_process_pid, s390_add_process, s390_process_info_get)
(s390_get_debug_reg_state): New functions.
(s390_stopped_by_watchpoint): Now access the watch_areas VEC via
s390_get_debug_reg_state.
(s390_prepare_to_resume): Likewise.
(s390_insert_watchpoint): Likewise.
(s390_remove_watchpoint): Likewise.
(s390_forget_process, s390_linux_new_fork): New linux_nat target
methods.
(_initialize_s390_nat): Register them.
For S390, the list of active watchpoints is maintained in a list based
at "watch_base". This refactors the list to a vector "watch_areas".
gdb/ChangeLog:
* s390-linux-nat.c (s390_watch_area): New typedef. Define a VEC.
(watch_base): Remove variable.
(watch_areas): New variable.
(s390_stopped_by_watchpoint): Transform operations on the
watch_base list to equivalent operations on the watch_areas VEC.
(s390_prepare_to_resume): Likewise.
(s390_insert_watchpoint): Likewise.
(s390_remove_watchpoint): Likewise.
When using the lwp_info structure, avoid accessing its members directly,
and use the advertised function interfaces instead. This is according
to the instructions in linux-nat.h and prepares for making some of the
code common between gdb and gdbserver.
gdb/ChangeLog:
* s390-linux-nat.c (s390_prepare_to_resume): Use advertised lwp
functions instead of accessing lwp_info structure members.
(s390_mark_per_info_changed): New function.
(s390_new_thread): Use it.
(s390_refresh_per_info_cb): New function.
(s390_refresh_per_info): Remove parameter. Refresh all lwps of
the current process.
(s390_insert_watchpoint): Adjust call to s390_refresh_per_info.
(s390_remove_watchpoint): Likewise.
gcc-6.2.1-1.fc26.x86_64
gdb compile failed, /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/casts.cc:40:10: error: expected primary-expression before 'int'
decltype(int x)
^~~
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/casts.cc:40:10: error: expected ')' before 'int'
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/casts.cc:40:1: error: expected unqualified-id before 'decltype'
decltype(int x)
^~~~~~~~
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/casts.cc: In function 'int main(int, char**)':
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/casts.cc:59:14: error: expected primary-expression before 'decltype'
double y = decltype(2);
^~~~~~~~
'decltype' is a registered keyword since C++11 which is now a default for GCC.
On Thu, 15 Sep 2016 14:06:56 +0200, Pedro Alves wrote:
Seems to be exercising the FLAG_SHADOW bits:
...
{"__typeof__", TYPEOF, OP_TYPEOF, 0 },
{"__typeof", TYPEOF, OP_TYPEOF, 0 },
{"typeof", TYPEOF, OP_TYPEOF, FLAG_SHADOW },
{"__decltype", DECLTYPE, OP_DECLTYPE, FLAG_CXX },
{"decltype", DECLTYPE, OP_DECLTYPE, FLAG_CXX | FLAG_SHADOW },
...
/* This is used to associate some attributes with a token. */
enum token_flag
{
...
/* If this bit is set, the token is conditional: if there is a
symbol of the same name, then the token is a symbol; otherwise,
the token is a keyword. */
FLAG_SHADOW = 2
};
So perhaps a better fix is to move that particular test to a
separate testcase that force-compiles with -std=c++03.
gdb/testsuite/ChangeLog
2016-09-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.cp/casts.cc (decltype): Move it ...
(main): ... with its call to ...
* gdb.cp/casts03.cc: ... a new file.
* gdb.cp/casts.exp: Add new file casts03.cc, move decltype test to it.
gcc-6.2.1-1.fc26.x86_64
g++ -std=c++03:
no warnings
g++:
In file included from /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.cc:79:0:
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.h:9:34: error: ‘constexpr’ needed for in-class initialization of static
data member ‘const float gnu_obj_4::somewhere’ of non-integral type [-fpermissive]
static const float somewhere = 3.14159;
^~~~~~~
clang++:
In file included from /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.cc:79:
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.h:9:22: warning: in-class initializer for static data member of type 'const
float' is a GNU extension [-Wgnu-static-float-init]
static const float somewhere = 3.14159;
^ ~~~~~~~
1 warning generated.
clang++ -std=c++11:
In file included from /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.cc:79:
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.h:9:22: error: in-class initializer for static data member of type 'const
float' requires 'constexpr' specifier [-Wstatic-float-init]
static const float somewhere = 3.14159;
^ ~~~~~~~
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.h:9:3: note: add 'constexpr'
static const float somewhere = 3.14159;
^
constexpr
1 error generated.
OK for check-in?
After the fix out of the 4 combinations above only this one remains non-empty:
clang++:
In file included from /home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.cc:79:
/home/jkratoch/redhat/gdb-clean/gdb/testsuite/gdb.cp/m-static.h:9:22: warning: in-class initializer for static data member of type 'const
float' is a GNU extension [-Wgnu-static-float-init]
static const float somewhere = 3.14159;
^ ~~~~~~~
1 warning generated.
On Thu, 15 Sep 2016 15:10:50 +0200, Pedro Alves wrote:
Hmm, OK, now that I read the test, I think you were right in trying to
keep it safe, actually. The .exp file has:
if { $non_dwarf } { setup_xfail *-*-* }
gdb_test "print test4.everywhere" "\\$\[0-9\].* = 317" "static const int initialized in class definition"
if { $non_dwarf } { setup_xfail *-*-* }
gdb_test "print test4.somewhere" "\\$\[0-9\].* = 3.14\[0-9\]*" "static const float initialized in class definition"
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Added by this:
https://sourceware.org/bugzilla/show_bug.cgi?id=11702https://sourceware.org/ml/gdb-patches/2010-06/msg00677.htmlhttps://sourceware.org/ml/gdb-patches/2010-06/txt00011.txt
So the new patch would make that highlighted tested above not
test what its test message says it is testing.
So I now think your original patch is better. Please push
that one instead.
gdb/testsuite/ChangeLog
2016-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.cp/m-static.h (gnu_obj_4::somewhere): Use constexpr for C++11.
* gdb.arch/powerpc-power.s: Update Power9 instruction tests
and sync up the test with tests in gas/testsuite/gas/ppc.
* gdb.arch/powerpc-power.exp: Likewise.
There were always various problems with compatibility with ccache:
https://bugzilla.redhat.com/show_bug.cgi?id=488863https://bugzilla.redhat.com/show_bug.cgi?id=759592https://sourceware.org/ml/gdb-patches/2009-02/msg00397.html
IMO in a summary ccache finds more a benefit of faster compilation despite the
debug info is no longer exactly the same (as without ccache).
Although for example in this case ccache helped to find a real GDB bug:
https://sourceware.org/ml/gdb-patches/2015-01/msg00497.html
For the GDB testcases ccache has (IMO) no real performance advantage and it
just brings heisenbugs - false FAILs - from time to time:
Breakpoint 1, main () at gdb/testsuite/gdb.base/vdso-warning.c:21^M
21 return 0;^M
(gdb) PASS: gdb.base/vdso-warning.exp: run: startup
->
Breakpoint 1, main () at gdb/testsuite/gdb.base/hbreak-unmapped.c:21^M
21 return 0;^M
(gdb) FAIL: gdb.base/vdso-warning.exp: run: startup
So I find most safe and easy to just disable ccache for all testsuites.
gdb/testsuite/ChangeLog
2016-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* lib/future.exp: Set CCACHE_DISABLE, clear CCACHE_NODISABLE.
The last commit was supposed to have the reference to ptrace () removed.
The patch didn't get updated correctly before the commit. This commit
fixes the comment as requested
gdbserver/ChangeLog
2016-09-06 Carl Love <cel@us.ibm.com>
* server.c (start_inferior): Fixed comment, requested comment change
didn't get updated correctly. Removed reference to ptrace () call as
it is only true on Linux systems.
The test checks to make sure GDB exits cleanly if there is
no valid target binary. Currently, ppc and S390 fail on this
test. The function target_post_create_inferior () calls
linux_post_create_inferior () which calls the architecture
specific functions s390_arch_setup () and ppc_arch_setup ()
which make ptrace calls to access the architecture specific
registers. These ptrace calls fail because the process does
not exist causing GDB to exit on error.
This patch checks to see if the initial ptrace (PTRACE_TRACEME, ...)
call returned a status of TARGET_WAITKIND_EXITED indicating the
target has already exited. If the target has exited, then the
target_post_create_inferior () is not called since there is no
inferior to be setup. The test to see if the initial ptrace
call succeeded is done after the ptrace (PTRACE_TRACEME, ...)
call and the wait for the inferior process to stop, assuming
it exists, has occurred.
The patch has been tested on X86 64-bit, ppc64 and s390. If
fixes the test failures on ppc64 and s390. The test does not
fail on X86 64-bit. The patch does not introduce any additional
regression failures on any of these three platforms.
gdbserver/ChangeLog
2016-09-06 Carl Love <cel@us.ibm.com>
* server.c (start_inferior): Do not call
function target_post_create_inferior () if the
inferior process has already exited.
GCC 6's ICF optimization pass is making the declaration of 'm1' and
'm2', on gdb.base/stap-probe.c, to be unified. However, this leads to
only one instance of the probe 'two' being created, which causes a
failure on the testsuite (which expects a multi-location breakpoint to
be inserted on the probe).
This patch fixes this failure by declaring a dummy variable on 'm1',
and using it as an argument to m1's version of probe 'two'. Since we
do not care about the contents of the functions nor about the
arguments of each probe 'two', this is OK.
gdb/testsuite/ChangeLog:
2016-09-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/stap-probe.c (m1): New variable 'dummy', necessary to
make m1's definition to be different from m2's. Use 'dummy' as an
argument for probe 'two'.
On various GNU Elf architectures, including AArch64, ARM, s390/s390x,
ppc32/64, and sparc32/64, the dynamic loader passes HWCAP as a parameter
to each ifunc resolver. Currently there is an open glibc Bugzilla that
requests this to be generalized to all architectures:
https://sourceware.org/bugzilla/show_bug.cgi?id=19766
And various ifunc resolvers already rely on receiving HWCAP. Currently
GDB always calls an ifunc resolver without any arguments; thus the
resolver may receive garbage, and based on that, the resolver may decide
to return a function that is not suited for the given platform.
This patch always passes HWCAP to ifunc resolvers, even on systems where
the dynamic loader currently behaves otherwise. The rationale is
that (1) the dynamic loader may get adjusted on those systems as well in
the future; (2) passing an unused argument should not cause a problem
with existing resolvers; and (3) the logic is much simpler without such
a distinction.
gdb/ChangeLog:
* elfread.c (auxv.h): New include.
(elf_gnu_ifunc_resolve_addr): Pass HWCAP to ifunc resolver.
gdb/testsuite/ChangeLog:
* gdb.base/gnu-ifunc-lib.c (resolver_hwcap): New external
variable declaration.
(gnu_ifunc): Add parameter hwcap. Store it in resolver_hwcap.
* gdb.base/gnu-ifunc.c (resolver_hwcap): New global variable.
* gdb.base/gnu-ifunc.exp: Add test to verify that the resolver
received HWCAP as its argument.
Pedro Alves
Tom Tromey
Fredrik Hederstierna
Yao Qi
Jon Turney
Edjunior Barbosa Machado
Anton Kolesov
Simon Marchi
Maciej W. Rozycki
Sergio Durigan Junior
Simon Marchi
Andreas Arnez
Jan Kratochvil
Peter Bergner
Carl E. Love
Jon Beniston