Make _bfd_riscv_relax_call handle section alignment padding same as
the _bfd_riscv_relax_lui and _bfd_riscv_relax_pc functions already
do. Use the max section alignment if section boundaries are crossed,
otherwise the alignment of the containing section.
bfd/
PR 25181
* elfnn-riscv.c (_bfd_riscv_relax_call): Always add max_alignment to
foff. If sym_sec->output_section and sec->output_section are the same
and not *ABS* then set max_alignment to that section's alignment.
ld/
PR 25181
* testsuite/ld-riscv-elf/call-relax-0.s: New file.
* testsuite/ld-riscv-elf/call-relax-1.s: New file.
* testsuite/ld-riscv-elf/call-relax-2.s: New file.
* testsuite/ld-riscv-elf/call-relax-3.s: New file.
* testsuite/ld-riscv-elf/call-relax.d: New test.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run call-relax test.
Change-Id: Iaf65cee52345abf1955f36e8e72c4f6cc0db8d9a
Two patches from Nelson Chu.
It is better to use the linker's callback functions to handle the link time
error when relocating. The unresolved relocation error can be regarded as
an unsupported relocation. To make user easier to understand different errors,
we need to extend the current error message format of the callback function
since the format is fixed.
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Use asprintf to extend
the error message if needed, and then store the result into the
`msg_buf`. Finally, remember to free the unused `msg_buf`. All error
message for the dangerous relocation should be set before we call the
callback function. If we miss the error message since linker runs out
of memory, we should set the default error message for the error.
ld/
* testsuite/ld-riscv-elf/lib-nopic-01a.s: Create the shared library
lib-nopic-01a.so, it will be linked with lib-nopic-01b.s.
* testsuite/ld-riscv-elf/lib-nopic-01b.s: Add new test for the
unresolved relocation. Link the non-pic code into a shared library
may cause the error.
* testsuite/ld-riscv-elf/lib-nopic-01b.d: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run the new test only when
the shared library is supported.
R_RISCV_CALL, R_RISCV_JAL and R_RISCV_RVC_JUMP are pc-relative relocation.
For now, we do not allow the object with these relocation links into a shared
library since the referenced symbols may be loaded to the places that too far
from the pc. We can improve the error message for these unsupported relocation
to notice user that they should recompile their code with `fPIC`.
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Report the error message
that user should recompile their code with `fPIC` when linking non-pic
code into shared library.
ld/
* testsuite/ld-riscv-elf/lib-nopic-01b.d: Update the error message.
Change-Id: Ib3347a0a6fa1c2b20a9647c314d5bec2c322ff04
For the lui and auipc relaxations, since the symbol value of an undefined weak
symbol is always be zero, we can optimize the patterns into a single LI/MV/ADDI
instruction.
bfd/
* elfnn-riscv.c (riscv_pcgp_hi_reloc): Add new field undefined_weak.
(riscv_record_pcgp_hi_reloc): New parameter undefined_weak.
Set undefined_weak field from it.
(relax_func_t): New parameter undefined_weak.
(_bfd_riscv_relax_call): New ignored parameter undefined_weak.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_delete): Likewise.
(_bfd_riscv_relax_lui): New parameter undefined_weak. If true,
allow relaxing. For LO12* relocs, set rs1 to x0 when undefined_weak.
(_bfd_riscv_relax_pc): New parameter undefined_weak. For LO12* relocs,
set undefined_weak from hi_reloc. If true, allow relaxing. For LO12*
relocs, set rs1 to x0 when undefined_weak and change to non-pcrel
reloc.
(_bfd_riscv_relax_section): New local undefined_weak. Set for
undef weak relocs that can be relaxed. Pass to relax_func call.
ld/
* testsuite/ld-riscv-elf/weakref32.s: Add relaxable undef weak code.
* testsuite/ld-riscv-elf/weakref64.s: Likewise.
* testsuite/ld-riscv-elf/weakref32.d: Updated.
* testsuite/ld-riscv-elf/weakref64.d: Updated.
The linker doesn't allocate memory space for sections that are only SEC_ALLOC
and SEC_THREAD_LOCAL. See the IS_TBSS test in ld/ldlang.c. So we need to
pretend that .tdata.dyn sections have contents to get the right result. It
will be marked this way anyways if there is a .tdata section to merge with.
bfd/
PR 23825
* elfnn-riscv.c (riscv_elf_create_dynamic_sections): Add SEC_LOAD,
SEC_DATA, and SEC_HAS_CONTENTS to .tdata.dyn section.
This was noticed while trying to test the compiler -msave-restore support.
Putting non-pic code in a shared library gives a linker error, but doesn't
stop the build.
rohan:2030$ cat libtmp.c
extern int sub2 (int);
int sub (int i) { return sub2 (i + 10); }
rohan:2031$ cat libtmp2.c
extern int sub (int);
int sub2 (int i) { return sub (i + 10); }
rohan:2032$ riscv64-unknown-linux-gnu-gcc --shared -o libtmp.so libtmp.c
rohan:2033$ riscv64-unknown-linux-gnu-gcc --shared -o libtmp2.so libtmp2.c libtmp.so
/home/jimw/FOSS/install-riscv64/lib/gcc/riscv64-unknown-linux-gnu/8.3.0/../../../../riscv64-unknown-linux-gnu/bin/ld: /tmp/cctrsIBe.o(.text+0x18): unresolvable R_RISCV_CALL relocation against symbol `sub'
rohan:2034$ echo $?
0
rohan:2035$ ls -lt libtmp2.so
-rwxr-xr-x 1 jimw jimw 6912 Aug 30 14:32 libtmp2.so
rohan:2036$
The patch fixes this by forcing a linker error. I now get this.
ohan:2059$ sh tmp.script
/home/jimw/FOSS/BINUTILS/X-riscv64-linux/ld/ld-new: libtmp2.o(.text+0x18): unresolvable R_RISCV_CALL relocation against symbol `sub'
/home/jimw/FOSS/BINUTILS/X-riscv64-linux/ld/ld-new: final link failed: bad value
rohan:2060$ echo $?
1
rohan:2061$ ls -lt libtmp2.so
ls: cannot access 'libtmp2.so': No such file or directory
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): For unresolvable reloc
error, call bfd_set_error, set ret to FALSE, and goto out label.
This was broken when I changed how we compute the value for the gp register.
It used to be computed inside the sdata section. Now it is computed at the
end which makes it an abs section symbol. There is code that tries to use
the alignment of the section that the gp value is in, but this does not work
if it is in the abs section, as the abs section has alignment of 1 byte.
There are people using alternative linker scripts that still define it in the
sdata section, so the code is still useful. Thus adding a check to disable
this when gp is in the abs section.
bfd/
* elfnn-riscv.c (_bfd_riscv_relax_lui): Add check to exclude abs
section when setting max_alignment. Update comment.
(_bfd_riscv_relax_pc): Likewise.
This fixes a problem originally reported at
https://github.com/riscv/riscv-binutils-gdb/issues/173
If you have code linked at address zero, you can have a lui instruction
loading a value 0x800 which gets relaxed to a c.lui which is valid (c.lui 0x1
followed by addi -0x800). Relaxation can reduce the value below 0x800 at which
point the c.lui 0x0 is no longer valid. We can fix this by converting the
c.lui to a c.li which can load 0.
bfd/
* elfnn-riscv.c (perform_relocation) <R_RISCV_RVC_LUI>: If
RISCV_CONST_HIGH_PART (value) is zero, then convert c.lui instruction
to c.li instruction, and use ENCODE_RVC_IMM to set value.
ld/
* testsuite/ld-riscv-elf/c-lui-2.d: New.
* testsuite/ld-riscv-elf/c-lui-2.ld: New.
* testsuite/ld-riscv-elf/c-lui-2.s: New.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run the c-lui-2 test.
bfd/ChangeLog
Ilia Diachkov <ilia.diachkov@optimitech.com>
* elfnn-riscv.c (_bfd_riscv_relax_lui): Set lui relax safety area to
two pages in relro presence.
2019-06-24 Ilia Diachkov <ilia.diachkov@optimitech.com>
bfd/
* elfnn-riscv.c (_bfd_riscv_relax_lui): Delete early exit when
SEC_MERGE or SEC_CODE flags are set.
(_bfd_riscv_relax_section): New local symtype. Set sym_sec and
symtype consistently. Don't include sec_addr (sym_sec) in symval.
Add check for SEC_INFO_TYPE_MERGE and call _bfd_merged_section_offset.
Add sec_addr (sym_sec) after handling merge sections.
This fixes a glib build failure reported in PR 24389. Using ld -b binary
creates an object file with no elf header flags set which has the wrong ABI
info for riscv64-linux. But the file also has no code sections, so I added
code borrowed from the arm port that only checks the ELF header ABI flags if
there is a code section.
bfd/
PR 24389
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Move read of
ELF header flags to after check for ELF object file. Loop through
sections looking for code sections, if none, then skip ABI checks.
sym is only set for local symbols. h is only set for global symbols. Gas
won't let me create a global section symbol, but bfd appears to have some
support for that, and I can't rule out that other assemblers might do this.
So we need to support both, and verify sym and h are non-NULL before using.
bfd/
PR 24365
* elfnn-riscv.c (riscv_elf_relocate_section): For STT_SECTION check,
verify sym non-NULL before using. Add identical check using h.
bfd/
* elfnn-riscv.c (riscv_make_plt_header): New arg output_bfd. Change
return type to bfd_boolean. If EF_RISCV_RVE call _bfd_error_handler
and return FALSE. Return TRUE at end.
(riscv_make_plt_entry): Likewise.
(riscv_elf_finish_dynamic_symbol): Update call to riscv_make_plt_entry.
(riscv_elf_finish_dynamic_sections): Update call to
riscv_make_plt_header.
bfd/
* elfnn-riscv.c (_bfd_riscv_relax_pc) <R_RISCV_PCREL_LO12_I>: New local
hi_sec_off which is symbol address with addend subtracted. Use in
riscv_find_pcgp_hi_reloc and riscv_record_pcgp_lo_reloc calls.
bfd/
* elfnn-riscv.c (riscv_resolve_pcrel_lo_relocs): Add check for reloc
overflow with addend. Use reloc_dangerous instead of reloc_overflow.
Add strings for the two errors handled here.
(riscv_elf_relocate_section) In case R_RISCV_PCREL_LO12_I, rewrite
comment. Only give error with addend when used with section symbol.
In case bfd_reloc_dangerous, update error string.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run pcrel-lo-addend-2.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend-2.d: New.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend-2.s: New.
* testsuite/ld-riscv/elf/ld-riscv-elf/pcrel-lo-addend.d: Update name
and error string.
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Use bfd_reloc_dangerous
when pcrel_lo reloc has an addend. Use reloc_dangerous callback for
bfd_reloc_dangerous. Use einfo instead of warning callback for errors.
Add %X%P to error messages.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run pcrel-lo-addend test.
* testsuite/ld-riscv-elf/pcrel-lo-addend.d: New.
* testsuite/ld-riscv-elf/pcrel-lo-addend.s: New.
Correct a commit 9d06997adb ("RISC-V: Relax RISCV_PCREL_* to
RISCV_GPREL_*") regression and remove a `-Wmissing-field-initializers'
compilation error:
cc1: warnings being treated as errors
.../bfd/elfnn-riscv.c: In function '_bfd_riscv_relax_pc':
.../bfd/elfnn-riscv.c:3117: error: missing initializer
.../bfd/elfnn-riscv.c:3117: error: (near initialization for 'hi_reloc.hi_addend')
make[4]: *** [elf64-riscv.lo] Error 1
which for versions of GCC before 4.7 prevents support for RISC-V targets
from being built. See also GCC PR c/36750.
bfd/
* elfnn-riscv.c (_bfd_riscv_relax_pc): Use `memset' to
initialize `hi_reloc'.
bfd/
PR ld/22756
* elfnn-riscv.c (riscv_relax_delete_bytes): New parameter link_info.
If link_info->wrap_hash, check for a duplicate symbol and ignore.
(_bfd_riscv_relax_call, bfd_riscv_relax_lui, _bfd_riscv_relax_tls_le):
Pass new argument to riscv_relax_delete_bytes.
(_bfd_riscv_relax_align, _bfd_riscv_relax_delete): Likewise. Remove
ATTRIBUTE_UNUSED from link_info parameter.
Many targets define their own dyn_relocs struct when they could use
struct elf_dyn_relocs. This patch tidies that, and uses
readonly_dynrelocs in a few more places.
The SH adjust_dynamic_symbol had some really weird code dating back to
2002 that looked over dynamic relocations for any in SEC_HAS_CONTENTS
or SEC_READONLY sections, rather than just the usual SEC_READONLY
sections. So basically any dynamic relocation. What's more, the SH
relocate_section has no support for emitting dynamic relocations in
non-PIC. In other words, SH has no support for avoiding copy relocs
in non-PIC. I've made that more obvious by using "if (0 && ..)" in
asjust_dynamic_symbol.
Unfortunately, LM32, M32R, NDS32, and OR1K copied the bogus SH
adjust_dynamic_symbol code. So none of those targets would have
avoided copy relocs. LM32, M32R, NDS32 get the "if (0)" treatment
too. (LM32 is even more broken in that non_got_ref is never set.)
OR1K relocate_section looks like it might support dynamic relocs in
non-PIC, so I've enabled the copy reloc avoidance code for that
target.
* elf32-hppa.c (struct elf32_hppa_dyn_reloc_entry): Delete. Use
struct elf_dyn_relocs throughout file instead.
(elf32_hppa_adjust_dynamic_symbol): Comment tidy.
* elf32-lm32.c (struct elf_lm32_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(lm32_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-m32r.c (struct elf_m32r_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(m32r_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-metag.c (struct elf_metag_dyn_reloc_entry): Delete. Use
struct elf_dyn_relocs throughout file instead.
(elf_metag_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-microblaze.c (struct elf32_mb_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(readonly_dynrelocs): New function.
(microblaze_elf_adjust_dynamic_symbol): Use it.
* elf32-nds32.c (struct elf_nds32_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(nds32_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-nios2.c (struct elf32_nios2_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
* elf32-or1k.c (struct elf_or1k_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(or1k_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-sh.c (struct elf_sh_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(sh_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-tilepro.c (struct tilepro_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(tilepro_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfnn-riscv.c (struct riscv_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(riscv_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfxx-sparc.c (struct _bfd_sparc_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(_bfd_sparc_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfxx-tilegx.c (struct tilegx_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(tilegx_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol): Use readonly_dynrelocs.
In early October, HJ Lu added support for a number of targets to "Dump
dynamic relocation in read-only section with minfo". This extends
that support to more targets, displays the symbol involved, and splits
the existing function that sets TEXTREL into a "readonly_dynrelocs"
and "maybe_set_textrel" function. I'll need "readonly_dynrelocs" if I
ever get around to fixing "pr22374 function pointer initialization"
fails.
am33_2.0, arc, bfin, hppa64, mn10300, and nios2 fail to mark a binary
needing text relocations with DT_TEXTREL. That's not good. xtensa also
fails to do so but complains about "dangerous relocation: dynamic
relocation in read-only section" so I reckon that is fine and have
marked the test as an xfail. The other targets need maintainer
attention.
Curiously, the map file dump wasn't added for x86, so the map test
currently fail on x86. It also fails on alpha, am33_2.0, arc, bfin,
hppa64, ia64, m68k, mips, mn10300, nios2, score and vax. cris
complains with "tmpdir/textrel.o, section .rodata: relocation
R_CRIS_32 should not be used in a shared object; recompile with -fPIC"
so I've marked it as an xfail.
bfd/
* elf32-hppa.c (maybe_set_textrel): Print symbol for map file output.
* elf32-ppc.c (maybe_set_textrel): Likewise.
* elf64-ppc.c (maybe_set_textrel): Likewise.
* elf32-arm.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_arm_readonly_dynrelocs): ..this.
* elf32-lm32.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-m32r.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-metag.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-nds32.c: Delete unnecessary forward declarations.
(readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-or1k.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-sh.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-tic6x.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_tic6x_readonly_dynrelocs): ..this.
* elf32-tilepro.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf64-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfnn-aarch64.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(aarch64_readonly_readonly_dynrelocs): ..this.
* elfnn-riscv.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-sparc.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-tilegx.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
ld/
* testsuite/ld-elf/shared.exp: Run new textrel tests.
* testsuite/ld-elf/textrel.map: New file.
* testsuite/ld-elf/textrel.rd: New file.
* testsuite/ld-elf/textrel.s: New file.
* testsuite/ld-elf/textrel.warn: New file.
This makes the elf_link_hash_entry weakdef field, currently used to
point from a weak symbol to a strong alias, a circular list so that
all aliases can be found from any of them. A new flag, is_weakalias,
distinguishes the weak symbol from a strong alias, and is used in all
places where we currently test u.weakdef != NULL.
With the original u.weakdef handling it was possible to have two or
more weak symbols pointing via u.weakdef to a strong definition.
Obviously that situation can't map to a circular list; One or more of
the weak symbols must point at another weak alias rather than the
strong definition. To handle that, I've added an accessor function to
return the strong definition.
* elf-bfd.h (struct elf_link_hash_entry): Add is_weakalias.
Rename u.weakdef to u.alias and update comment.
(weakdef): New static inline function.
* elflink.c (bfd_elf_record_link_assignment) Test is_weakalias
rather than u.weakdef != NULL, and use weakdef function.
(_bfd_elf_adjust_dynamic_symbol): Likewise.
(_bfd_elf_fix_symbol_flags): Likewise. Clear is_weakalias on
all aliases if def has been overridden in a regular object, not
u.weakdef.
(elf_link_add_object_symbols): Delete new_weakdef flag. Test
is_weakalias and use weakdef. Set is_weakalias and circular
u.alias. Update comments.
(_bfd_elf_gc_mark_rsec): Test is_weakalias rather than
u.weakdef != NULL and use weakdef function.
* elf-m10300.c (_bfd_mn10300_elf_adjust_dynamic_symbol): Test
is_weakalias rather than u.weakdef != NULL and use weakdef
function. Assert that def is strong defined.
* elf32-arc.c (elf_arc_adjust_dynamic_symbol): Likewise.
* elf32-arm.c (elf32_arm_adjust_dynamic_symbol): Likewise.
* elf32-bfin.c (elf32_bfinfdpic_adjust_dynamic_symbol): Likewise.
(bfin_adjust_dynamic_symbol): Likewise.
* elf32-cr16.c (_bfd_cr16_elf_adjust_dynamic_symbol): Likewise.
* elf32-cris.c (elf_cris_adjust_dynamic_symbol): Likewise.
* elf32-frv.c (elf32_frvfdpic_adjust_dynamic_symbol): Likewise.
* elf32-hppa.c (elf32_hppa_adjust_dynamic_symbol): Likewise.
* elf32-i370.c (i370_elf_adjust_dynamic_symbol): Likewise.
* elf32-lm32.c (lm32_elf_adjust_dynamic_symbol): Likewise.
* elf32-m32r.c (m32r_elf_adjust_dynamic_symbol): Likewise.
* elf32-m68k.c (elf_m68k_adjust_dynamic_symbol): Likewise.
* elf32-metag.c (elf_metag_adjust_dynamic_symbol): Likewise.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol): Likewise.
* elf32-nds32.c (nds32_elf_adjust_dynamic_symbol): Likewise.
* elf32-nios2.c (nios2_elf32_adjust_dynamic_symbol): Likewise.
* elf32-or1k.c (or1k_elf_adjust_dynamic_symbol): Likewise.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Likewise.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol): Likewise.
* elf32-score.c (s3_bfd_score_elf_adjust_dynamic_symbol): Likewise.
* elf32-score7.c (s7_bfd_score_elf_adjust_dynamic_symbol): Likewise.
* elf32-sh.c (sh_elf_adjust_dynamic_symbol): Likewise.
* elf32-tic6x.c (elf32_tic6x_adjust_dynamic_symbol): Likewise.
* elf32-tilepro.c (tilepro_elf_gc_mark_hook): Likewise.
(tilepro_elf_adjust_dynamic_symbol): Likewise.
* elf32-vax.c (elf_vax_adjust_dynamic_symbol): Likewise.
* elf32-xtensa.c (elf_xtensa_adjust_dynamic_symbol): Likewise.
* elf64-alpha.c (elf64_alpha_adjust_dynamic_symbol): Likewise.
* elf64-hppa.c (elf64_hppa_adjust_dynamic_symbol): Likewise.
* elf64-ia64-vms.c (elf64_ia64_adjust_dynamic_symbol): Likewise.
* elf64-ppc.c (ppc64_elf_gc_mark_hook): Likewise.
(ppc64_elf_adjust_dynamic_symbol): Likewise.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol): Likewise.
* elf64-sh64.c (sh64_elf64_adjust_dynamic_symbol): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_adjust_dynamic_symbol): Likewise.
* elfnn-ia64.c (elfNN_ia64_adjust_dynamic_symbol): Likewise.
* elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol): Likewise.
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_gc_mark_hook): Likewise.
(_bfd_sparc_elf_adjust_dynamic_symbol): Likewise.
* elfxx-tilegx.c (tilegx_elf_gc_mark_hook): Likewise.
(tilegx_elf_adjust_dynamic_symbol): Likewise.
* elfxx-x86.c (_bfd_x86_elf_adjust_dynamic_symbol): Likewise.