Extract the common parts of elf_i386_link_setup_gnu_properties and
elf_x86_64_link_setup_gnu_properties into a new function.
For x86-64, since PIC PLT layouts are the same as non-PIC PLT layouts,
initialize pic_plt0_entry and pic_plt_entry fields in PLT layouts with
the non-PIC PLT entries.
* elf32-i386.c (elf_i386_link_setup_gnu_properties): Updated.
Call _bfd_x86_elf_link_setup_gnu_properties.
* elf64-x86-64.c (elf_x86_lazy_plt_layout): Initialize
pic_plt0_entry and pic_plt_entry fields with the non-PIC PLT
entries.
(elf_x86_64_non_lazy_plt): Likewise.
(elf_x86_64_lazy_bnd_plt): Likewise.
(elf_x86_64_non_lazy_bnd_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_nacl_plt): Likewise.
(elf_x86_64_link_setup_gnu_properties): Updated. Call
_bfd_x86_elf_link_setup_gnu_properties.
* elfxx-x86.c: Include elf-vxworks.h".
(_bfd_x86_elf_link_setup_gnu_properties): New function.
* elfxx-x86.h (elf_x86_lazy_plt_layout): Remove "for i386 only"
comments for pic_plt0_entry and pic_plt_entry.
(elf_x86_non_lazy_plt_layout): Likewise.
(elf_x86_plt_layout_table): New.
(_bfd_x86_elf_link_setup_gnu_properties): Likewise.
PR lto/81968
* simple-object-elf.c (simple_object_elf_copy_lto_debug_section):
Keep names of removed global symbols.
* simple-object-xcoff.c (simple_object_xcoff_find_sections):
Improve .go_export csect handling. Don't make assumptions
on containing section or number of auxiliary entries.
PR lto/81968
* simple-object-elf.c (simple_object_elf_copy_lto_debug_section):
Adjust field with for sh_type write, set SHF_EXCLUDE only for
removed sections.
PR lto/81925
* simple-object-elf.c (simple_object_elf_write_shdr): Adjust
type of sh_addralign and sh_entsize and properly write
sh_entsize as Elf_Addr.
(simple_object_elf_write_to_file): Read sh_entsize as Elf_Addr.
* simple-object-common.h (struct simple_object_functions): Add
copy_lto_debug_sections hook.
* simple-object.c: Include fcntl.h.
(handle_lto_debug_sections): New helper function.
(simple_object_copy_lto_debug_sections): New function copying
early LTO debug sections to regular debug sections in a new file.
(simple_object_start_write): Handle NULL segment_name.
* simple-object-coff.c (simple_object_coff_functions): Adjust
for not implemented copy_lto_debug_sections hook.
* simple-object-mach-o.c (simple_object_mach_o_functions): Likewise.
* simple-object-xcoff.c (simple_object_xcoff_functions): Likewise.
* simple-object-elf.c (SHT_NULL, SHT_SYMTAB, SHT_RELA, SHT_REL,
SHT_GROUP): Add various sectopn header types.
(SHF_EXCLUDE): Add flag.
(Elf32_External_Sym, Elf64_External_Sym): Add symbol struct.
(ELF_ST_BIND, ELF_ST_TYPE, ELF_ST_INFO): Add accessors.
(STT_OBJECT, STT_FUNC, STT_TLS, STT_GNU_IFUNC): Add Symbol types.
(STV_DEFAULT): Add symbol visibility.
(SHN_COMMON): Add special section index name.
(struct simple_object_elf_write): New.
(simple_object_elf_start_write): Adjust for new private data.
(simple_object_elf_write_shdr): Pass in values for all fields
we write.
(simple_object_elf_write_to_file): Adjust. Copy from recorded
section headers if requested.
(simple_object_elf_release_write): Release private data.
(simple_object_elf_copy_lto_debug_sections): Copy and rename sections
as denoted by PFN and all their dependences, symbols and relocations
to the empty destination file.
(simple_object_elf_functions): Adjust for copy_lto_debug_sections hook.
* simple-object-xcoff.c (simple_object_xcoff_find_sections):
Search symbol table for .go_export symbol and apply pfn if found.
On <=RHEL6 hosts Fedora/RHEL GDB started to 'kill -STOP' all processes it
detached. Even those not originally T-stopped. This is a Fedora-specific
patch which is based on upstream GDB's PROC_STATE_STOPPED state.
I believe (I did not verify) this patch did regress it:
commit d617208bb0
Author: Pedro Alves <palves@redhat.com>
Date: Mon Jul 25 12:42:17 2016 +0100
linux-procfs: Introduce enum proc_state
As originally there was strstr() but now there is strcmp() and so the missing
trailing '\n' no longer matches.
The Bug was found by Michal Kolar.
Reproducibility:
$ gdb -p $PID
(gdb) quit
$ ...
Actual results:
===
RHEL6.9 x86_64 # scl enable devtoolset-7 bash
RHEL6.9 x86_64 # which gdb
/opt/rh/devtoolset-7/root/usr/bin/gdb
RHEL6.9 x86_64 # ./testcase.sh
24737 pts/0 S+ 0:00 /bin/sleep 4
24737 pts/0 T+ 0:00 /bin/sleep 4
RHEL6.9 x86_64 #
===
Expected results:
===
RHEL6.9 x86_64 # which gdb
/usr/bin/gdb
RHEL6.9 x86_64 # ./testcase.sh
24708 pts/0 S+ 0:00 /bin/sleep 4
24708 pts/0 S+ 0:00 /bin/sleep 4
./testcase.sh: line 20: kill: (24708) - No such process
RHEL6.9 x86_64 #
===
gdb/ChangeLog
2017-09-01 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/22046
* nat/linux-procfs.c (parse_proc_status_state): Fix PROC_STATE_STOPPED
detection.
This patch implements the ability to set/unset environment variables
on the remote target, mimicking what GDB already offers to the user.
There are two features present here: user-set and user-unset
environment variables.
User-set environment variables are only the variables that are
explicitly set by the user, using the 'set environment' command. This
means that variables that were already present in the environment when
starting GDB/GDBserver are not transmitted/considered by this feature.
User-unset environment variables are variables that are explicitly
unset by the user, using the 'unset environment' command.
The idea behind this patch is to store user-set and user-unset
environment variables in two separate sets, both part of gdb_environ.
Then, when extended_remote_create_inferior is preparing to start the
inferior, it will iterate over the two sets and set/unset variables
accordingly. Three new packets are introduced:
- QEnvironmentHexEncoded, which is used to set environment variables,
and contains an hex-encoded string in the format "VAR=VALUE" (VALUE
can be empty if the user set a variable with a null value, by doing
'set environment VAR=').
- QEnvironmentUnset, which is used to unset environment variables, and
contains an hex-encoded string in the format "VAR".
- QEnvironmentReset, which is always the first packet to be
transmitted, and is used to reset the environment, i.e., discard any
changes made by the user on previous runs.
The QEnvironmentHexEncoded packet is inspired on LLDB's extensions to
the RSP. Details about it can be seen here:
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>
I decided not to implement the QEnvironment packet because it is
considered deprecated by LLDB. This packet, on LLDB, serves the same
purpose of QEnvironmentHexEncoded, but sends the information using a
plain text, non-hex-encoded string.
The other two packets are new.
This patch also includes updates to the documentation, testsuite, and
unit tests, without introducing regressions.
gdb/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry mentioning new support
for setting/unsetting environment variables on the remote target.
(New remote packets): Add entries for QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
* common/environ.c (gdb_environ::operator=): Extend method to
handle m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::clear): Likewise.
(match_var_in_string): Change type of first parameter from 'char
*' to 'const char *'.
(gdb_environ::set): Extend method to handle
m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::unset): Likewise.
(gdb_environ::clear_user_set_env): New method.
(gdb_environ::user_set_envp): Likewise.
(gdb_environ::user_unset_envp): Likewise.
* common/environ.h (gdb_environ): Handle m_user_set_env_list and
m_user_unset_env_list on move constructor/assignment.
(unset): Add new default parameter 'update_unset_list = true'.
(clear_user_set_env): New method.
(user_set_envp): Likewise.
(user_unset_envp): Likewise.
(m_user_set_env_list): New std::set.
(m_user_unset_env_list): Likewise.
* common/rsp-low.c (hex2str): New function.
(bin2hex): New overload for bin2hex function.
* common/rsp-low.c (hex2str): New prototype.
(str2hex): New overload prototype.
* remote.c: Include "environ.h". Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
(remote_protocol_features): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(send_environment_packet): New function.
(extended_remote_environment_support): Likewise.
(extended_remote_create_inferior): Call
extended_remote_environment_support.
(_initialize_remote): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packet configs.
* unittests/environ-selftests.c (gdb_selftest_env_var):
New variable.
(test_vector_initialization): New function.
(test_init_from_host_environ): Likewise.
(test_reinit_from_host_environ): Likewise.
(test_set_A_unset_B_unset_A_cannot_find_A_can_find_B):
Likewise.
(test_unset_set_empty_vector): Likewise.
(test_vector_clear): Likewise.
(test_std_move): Likewise.
(test_move_constructor):
(test_self_move): Likewise.
(test_set_unset_reset): Likewise.
(run_tests): Rewrite in terms of the functions above.
gdb/gdbserver/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (handle_general_set): Handle QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(handle_query): Inform remote that QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset are supported.
gdb/doc/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (set environment): Add @anchor. Explain that
environment variables set by the user are sent to GDBserver.
(unset environment): Likewise, but for unsetting variables.
(Connecting) <Remote Packet>: Add "environment-hex-encoded",
"QEnvironmentHexEncoded", "environment-unset", "QEnvironmentUnset",
"environment-reset" and "QEnvironmentReset" to the table.
(Remote Protocol) <QEnvironmentHexEncoded, QEnvironmentUnset,
QEnvironmentReset>: New item, explaining the packet.
gdb/testsuite/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/share-env-with-gdbserver.c: New file.
* gdb.base/share-env-with-gdbserver.exp: Likewise.
The machinery to do this was there, but not enabled if the terminator
was the only thing in the section.
bfd/
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Don't exit early
for a section containing just a terminator. Allow multiple
terminators at end of section.
* elflink.c (bfd_elf_discard_info): Iterate over .eh_frame
sections when not adding alignment. Assert on terminator in
the middle of FDEs.
ld/
* testsuite/ld-elf/eh3.d: Update.
* testsuite/ld-elf/eh4.d: Update.
The problem of failing to build with arm-linux-gnueabihf-g++-4.8 was
that type CORE_ADDR is of "unsigned long" on a 64-bit machine so it's
OK to use %lx but is of type "unsigned long long" on a 32 bit system.
Fixed the problem in three places - (1) use a temp variable of type
CORE_ADDR as argument 3 when calling target_auxv_search() then assign
its value to "blksize" and "nbits" in 2 calls; (2) redo
adi_normalize_address() using masks and xor operators to calculate
normalized address; (3) call paddress() to print CORE_ADDR in either
printf_filtered() or error(). Thank you, Pedro, for all your
suggestions.
gdb/ChangeLog:
2017-08-31 Weimin Pan <weimin.pan@oracle.com>
* sparc64-tdep.c (adi_stat_t): Fix comment formatting.
(adi_available): Use a temp variable of type CORE_ADDR as argument
3 when calling target_auxv_search.
(adi_normalize_address): Use masks and xor operators to calculate
normalized address.
(adi_read_versions, adi_write_versions, adi_print_versions)
(do_examine, do_assign): Use paddress.
Since elfxx-x86.lo needs elf64.lo with 64-bit BFD, add elf64.lo together
with elfxx-x86.lo to bfd_backends for 64-bit BFD.
* configure.ac (bfd_backends): Add elf64.lo together with
elfxx-x86.lo for 64-bit BFD.
* configure: Regenerated.
For opcode fields that are not addresses, display as
integers instead of using print_address_func.
opcodes/ChangeLog:
2017-08-31 James Bowman <james.bowman@ftdichip.com>
* ft32-dis.c (print_insn_ft32): Correct display of non-address
fields.
The howto for R_FT32_18 was using complain_overflow_signed. But some
valid address calculations exceed the range of this reloc. Changing it
to complain_overflow_dont allows them.
bfd/ChangeLog:
* elf32-ft32.c (ft32_elf_howto_table): Use
complain_overflow_dont for R_FT32_18.
elf64_vms_close_and_cleanup calls bfd_get_size, which calls
iovec->bstat. cache_bstat ends up adding the bfd to the cache lru
list, negating the bfd_cache_close call in bfd_close_all_done. So
there is a dangling pointer into the freed and then reused bfd. Thus,
bfd_cache_close must be called after _close_and_cleanup, or better,
via iovec->bclose.
PR binutils/22032
* opncls.c (bfd_close_all_done): Don't call bfd_cache_close
before _close_and_cleanup. Call iovec->bclose after.
(bfd_close): Remove code common to, and call, bfd_close_all_done.
Complement commit 5b5f4e6f8c ("ld: Early detection of orphans we know
will be discarded") and add `.MIPS.options' to the list of sections
discarded with orphan tests, removing failures like:
./ld-new: error: unplaced orphan section `.MIPS.options' from `tmpdir/orphan-11.o'.
FAIL: ld-elf/orphan-11
and:
./ld-new: error: unplaced orphan section `.MIPS.options' from `tmpdir/orphan-12.o'.
FAIL: ld-elf/orphan-12
from n64 MIPS testing.
ld/
* testsuite/ld-elf/orphan-11.ld: Also discard `.MIPS.options'
sections.
Since both elf32-i386.c and elf64-x86-64.c support targets with
different ELF_MACHINE_CODEs, _bfd_x86_elf_link_hash_table_create
should check target_id instead of elf_machine_code.
* elfxx-x86.c (_bfd_x86_elf_link_hash_table_create): Check
target_id instead of elf_machine_code.
Fix a bug in commit a6ebf6169a ("MIPS: Convert cross-mode BAL to
JALX") and in BFD linker relaxation correct the microMIPS interpretation
of the branch offset, which is supposed to be shifted by 1 bit, rather
than 2 as in the regular MIPS case.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Correct microMIPS
branch offset interpretation.
gas/
* testsuite/gas/mips/branch-addend-micromips.d: New test.
* testsuite/gas/mips/branch-addend-micromips-n32.d: New test.
* testsuite/gas/mips/branch-addend-micromips-n64.d: New test.
* testsuite/gas/mips/branch-addend-micromips.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/bal-jalx-addend-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-addend-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Fix a bug in commit 8b10b0b3e1 ("MIPS: Add options to control branch
ISA checks") and with the `-mignore-branch-isa' command-line option also
lift a GAS check for invalid MIPS16 branches between ISA modes, which is
made separately from regular MIPS and microMIPS checks.
gas/
* config/tc-mips.c (md_convert_frag): Respect
`mips_ignore_branch_isa'.
* testsuite/gas/mips/branch-local-5.d: New test.
* testsuite/gas/mips/branch-local-n32-5.d: New test.
* testsuite/gas/mips/branch-local-n64-5.d: New test.
* testsuite/gas/mips/branch-local-6.d: New test.
* testsuite/gas/mips/branch-local-n32-6.d: New test.
* testsuite/gas/mips/branch-local-n64-6.d: New test.
* testsuite/gas/mips/branch-local-7.d: New test.
* testsuite/gas/mips/branch-local-n32-7.d: New test.
* testsuite/gas/mips/branch-local-n64-7.d: New test.
* testsuite/gas/mips/branch-local-ignore-5.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-5.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-5.d: New test.
* testsuite/gas/mips/branch-local-ignore-6.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-6.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-6.d: New test.
* testsuite/gas/mips/branch-local-5.l: New stderr output.
* testsuite/gas/mips/branch-local-6.l: New stderr output.
* testsuite/gas/mips/branch-local-5.s: New test source.
* testsuite/gas/mips/branch-local-6.s: New test source.
* testsuite/gas/mips/branch-local-7.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
In the TLS GD/LD to LE optimization, ld replaces a sequence like
addi 3,2,x@got@tlsgd R_PPC64_GOT_TLSGD16 x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
with
addis 3,13,x@tprel@ha R_PPC64_TPREL16_HA x
addi 3,3,x@tprel@l R_PPC64_TPREL16_LO x
nop
When the tprel offset is small, this can be further optimized to
nop
addi 3,13,x@tprel
nop
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add do_tls_opt.
(ppc64_elf_tls_optimize): Set it.
(ppc64_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO and TPREL16_LO_DS relocs to use r13 when
addis would add zero.
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add do_tls_opt.
(ppc_elf_tls_optimize): Set it.
(ppc_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO relocs to use r2 when addis would add zero.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Nop addis on
TPREL16_HA, and convert insn on TPREL16_LO and TPREL16_LO_DS
relocs to use r2/r13 when addis would add zero.
ld/
* testsuite/ld-powerpc/tls.s: Add calls with tls markers.
* testsuite/ld-powerpc/tls32.s: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Run tls marker tests.
* testsuite/ld-powerpc/tls.d: Adjust for TPREL16_HA/LO optimization.
* testsuite/ld-powerpc/tlsexe.d: Likewise.
* testsuite/ld-powerpc/tlsexetoc.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
* testsuite/ld-powerpc/tlsmark.d: Likewise.
* testsuite/ld-powerpc/tlsopt4.d: Likewise.
* testsuite/ld-powerpc/tlstoc.d: Likewise.
There isn't a good reason for ld.bfd to behave differently from gold
in the code generated by TLS GD/LD to LE optimization.
bfd/
* elf64-ppc.c (ppc64_elf_relocate_section): When optimizing
__tls_get_addr call sequences to LE, don't move the addi down
to the nop. Replace the bl with addi and leave the nop alone.
ld/
* testsuite/ld-powerpc/tls.d: Update.
* testsuite/ld-powerpc/tlsexe.d: Update.
* testsuite/ld-powerpc/tlsexetoc.d: Update.
* testsuite/ld-powerpc/tlsld.d: Update.
* testsuite/ld-powerpc/tlsmark.d: Update.
* testsuite/ld-powerpc/tlsopt4.d: Update.
* testsuite/ld-powerpc/tlstoc.d: Update.
FreeBSD/mips kernels were recently changed to include the floating
point implementation revision register in the floating point register
set exported in process cores and via ptrace() (r318067). This change
will first ship in FreeBSD 12.0 when it is eventually released. The
space used to hold FIR was previously reserved in 'struct fpreg' as a
zero-filled dummy for padding, so 'struct fpreg' has not changed in
size. Since FIR should be non-zero on all MIPS processors supported
by FreeBSD, ignore a value of 0 from 'struct fpreg' and only report
non-zero values as a valid FIR register.
gdb/ChangeLog:
* mips-fbsd-nat.c (getfpregs_supplies): Return true for FIR.
* mips-fbsd-tdep.c (mips_fbsd_supply_fpregs): Split supply of FSR
out of loop and add supply of FIR.
(mips_fbsd_collect_fpregs): Split collect of FSR out of loop and
add collect of FIR.
This implements the special __tls_get_addr_opt call stub for powerpc
gold that returns __thread variable addresses without actually making
a call to __tls_get_addr in most cases. Shared libraries that are
loaded at program load time (ie. dlopen is not used) have a known
layout for their __thread variables, and thus DTPMOD64/DPTREL64 pairs
describing those variables can be set up by ld.so for the
__tls_get_addr_opt call stub fast exit.
Ref https://sourceware.org/ml/libc-alpha/2015-03/msg00626.html
I really, really wish I'd used a differently versioned __tls_get_addr
symbol than the base symbol to indicate glibc support for the
optimized call, rather than having glibc export __tls_get_addr_opt. A
lot of the messing around here, flipping symbols from __tls_get_addr
to __tls_get_addr_opt, is caused by that decision. About the only
benefit is that a user can see at a glance that their disassembled
code is calling __tls_get_addr via the fancy call stub.. Anyway, we
need references to __tls_get_addr to seem like they were to
__tls_get_addr_opt, and in cases like the tsan interceptor, a
definition of __tls_get_addr to seem like one of __tls_get_addr_opt
as well. That's the reason for Symbol::clear_in_reg and
Symbol_table::clone, and why symbols are substituted in Scan::global
and other places dealing with dynamic linking.
elfcpp/
* elfcpp.h (DT_PPC_OPT): Define.
* powerpc.h (PPC_OPT_TLS): Define.
gold/
* options.h (tls_get_addr_optimize): New option.
* symtab.h (Symbol::clear_in_reg, clone): New functions.
(Sized_symbol::clone): New function.
(Symbol_table::clone): New function.
* resolve.cc (Symbol::clone, Sized_symbol::clone): New functions.
* powerpc.cc (Target_powerpc::has_tls_get_addr_opt_,
tls_get_addr_, tls_get_addr_opt_): New vars.
(Target_powerpc::tls_get_addr_opt, tls_get_addr,
is_tls_get_addr_opt, replace_tls_get_addr,
set_has_tls_get_addr_opt, stk_linker): New functions.
(Target_powerpc::Track_tls::maybe_skip_tls_get_addr_call): Add
target param. Update callers. Compare symbols rather than names.
(Target_powerpc::do_define_standard_symbols): Init tls_get_addr_
and tls_get_addr_opt_.
(Target_powerpc::Branch_info::mark_pltcall): Translate tls_get_addr
sym to tls_get_addr_opt.
(Target_powerpc::Branch_info::make_stub): Likewise.
(Stub_table::define_stub_syms): Likewise.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
(add_3_12_2, add_3_12_13, bctrl, beqlr, cmpdi_11_0, cmpwi_11_0,
ld_11_1, ld_11_3, ld_12_3, lwz_11_3, lwz_12_3, mr_0_3, mr_3_0,
mtlr_11, std_11_1): New constants.
(Stub_table::eh_frame_added_): Delete.
(Stub_table::tls_get_addr_opt_bctrl_, plt_fde_len_, plt_fde_): New vars.
(Stub_table::init_plt_fde): New functions.
(Stub_table::add_eh_frame, replace_eh_frame): Move definition out
of line. Init and use plt_fde_.
(Stub_table::plt_call_size): Return size for tls_get_addr stub.
Extract alignment code to..
(Stub_table::plt_call_align): ..this new function. Adjust all callers.
(Stub_table::add_plt_call_entry): Set has_tls_get_addr_opt and
tls_get_addr_opt_bctrl, and align after that.
(Stub_table::do_write): Write out tls_get_addr stub.
(Target_powerpc::do_finalize_sections): Emit DT_PPC_OPT
PPC_OPT_TLS/PPC64_OPT_TLS bit.
(Target_powerpc::Relocate::relocate): Don't check for or modify
nop following bl for tls_get_addr stub.
On 64-bit targets there is a 32-bit hole in symbol->u_, and another
due to symbol flags exceeding 32 bits. By splitting the union,
the total size of the class reduces by one 64-bit word.
* symtab.h (Symbol): Split u_ into u1_ and u2_. Adjust accessors
to suit. Move plt_offset_ before got_offsets_.
* symtab.cc (Symbol::init_fields): Adjust for union change.
(Symbol::init_base_output_data): Likewise.
(Symbol::init_base_output_segment): Likewise.
(Symbol::allocate_base_common): Likewise.
(Symbol::output_section): Likewise.
(Symbol::set_output_section): Likewise.
(Symbol::set_output_segment): Likewise.
* resolve.cc (Symbol::override_base): Likewise.
(Symbol::override_base_with_special): Likewise.
H.J. Lu
Tamar Christina
Nick Clifton
Jan Kratochvil
GDB Administrator
Sergio Durigan Junior
Alan Modra
Weimin Pan
James Bowman
Maciej W. Rozycki
Hans-Peter Nilsson
John Baldwin
Jozef Lawrynowicz