Necessary to fix parsing auxv entries from core files on systems that use
the layout specified by ELF instead of the incompatible variant used by Linux.
gdb/Changelog:
* gdbarch.sh (auxv_parse): New.
* gdbarch.h: Regenerated.
* gdbarch.c: Regenerated.
* auxv.c (target_auxv_parse): Call gdbarch_parse_auxv if provided.
This is the GDBserver counterpart of a change we recently made in
GDB to only rely on get_image_name to determine its name.
This simplification, in turn, allows us to remove a fair amount of
functions and globals which now become unused.
gdb/gdbserver/ChangeLog:
* win32-low.c (psapi_get_dll_name,
* win32_CreateToolhelp32Snapshot): Delete.
(win32_CreateToolhelp32Snapshot, win32_Module32First)
(win32_Module32Next, load_toolhelp, toolhelp_get_dll_name):
Delete.
(handle_load_dll): Add function description.
Remove code using psapi_get_dll_name and toolhelp_get_dll_name.
This patch is a small cleanup that moves the magic 0x1000 offset
to apply to a DLL's base address inside the win32_add_one_solib
function, rather than delegate that reponsibility to its callers.
gdb/gdbserver/ChangeLog:
* win32-low.c (win32_add_one_solib): Add 0x1000 to load_addr.
Add comment.
(win32_add_all_dlls): Remove 0x1000 offset applied to DLL
base address when calling win32_add_one_solib.
(handle_load_dll): Delete local variable load_addr.
Remove 0x1000 offset applied to DLL base address when calling
win32_add_one_solib.
(handle_unload_dll): Add comment.
This GDBserver patch mirrors a change made in GDB wich aims at
simplifying DLL handling during the inferior initialization
(process creation during the "run", or during an "attach").
Instead of processing each DLL load event, which is sometimes
incomplete, we ignore these events until the inferior has completed
its startup phase, and then just iterate over all DLLs via
EnumProcessModules.
As a side-effect, it fixes a small bug where win32_ensure_ntdll_loaded
was missing a 0x1000 offset in the DLL base address. This problem
should only be visible on the 64bit version of Windows 8.1, since
this is the only platform where win32_ensure_ntdll_loaded is actually
needed.
gdb/gdbserver/ChangeLog:
* win32-low.c (win32_add_all_dlls): Renames
win32_ensure_ntdll_loaded. Rewrite function documentation.
Adjust implementation to always load all DLLs.
Add 0x1000 offset to DLL base address when calling
win32_add_one_solib.
(child_initialization_done): New static global.
(do_initial_child_stuff): Set child_initialization_done to
zero during child initialization, and 1 after. Replace call
to win32_ensure_ntdll_loaded by call to win32_add_all_dlls.
Add comment.
(match_dll_by_basename, dll_is_loaded_by_basename): Delete.
(handle_unload_dll): Add function documentation.
(get_child_debug_event): Ignore load and unload DLL events
during child initialization.
Starting with DWARF version 4, the description of the DW_AT_high_pc
attribute was amended to say:
if it is of class constant, the value is an unsigned integer offset
which when added to the low PC gives the address of the first
location past the last instruction associated with the entity.
A change was made in Apr 27th, 2012 to reflect that change:
| commit 91da14142c
| Author: Mark Wielaard <mjw@redhat.com>
| Date: Fri Apr 27 18:55:19 2012 +0000
|
| * dwarf2read.c (dwarf2_get_pc_bounds): Check DW_AT_high_pc form to
| see whether it is an address or a constant offset from DW_AT_low_pc.
| (dwarf2_record_block_ranges): Likewise.
| (read_partial_die): Likewise.
Unfortunately, this new interpretation is now used regardless of
the CU's DWARF version. It turns out that one of WindRiver's compilers
(FTR: Diabdata 4.4) is generating DWARF version 2 info with
DW_AT_high_pc attributes improperly using the data4 form. Because of
that, we miscompute all high PCs incorrectly. This leads to a lot of
symtabs having overlapping ranges, which in turn causes havoc in
pc-to-symtab-and-line translations.
One visible effect is when inserting a breakpoint on a given function:
(gdb) b world
Breakpoint 1 at 0x4005c4
The source location of the breakpoint is missing. The output should be:
(gdb) b world
Breakpoint 1 at 0x4005c8: file dw2-rel-hi-pc-world.c, line 24.
What happens in this case is that the pc-to-SAL translation first
starts be trying to find the symtab associated to our PC using
each symtab's ranges. Because of the high_pc miscomputation,
many symtabs end up matching, and the heuristic trying to select
the most probable one unfortunately returns one that is unrelated
(it really had no change in this case to do any better). Once we
have the wrong symtab, the start searching the associated linetable,
where the addresses are correct, thus finding no match, and therefore
no SAL.
This patch is an attempt at handling the situation as gracefully
as we can, without guarantees. It introduces a new function
"attr_value_as_address" which uses the correct accessor for getting
the value of a given attribute. It then adjust the code throughout
this unit to use this function instead of assuming that addresses always
have the DW_FORM_addr format.
It also fixes the original issue of miscomputing the high_pc
by limiting the new interpretation of constant form DW_AT_high_pc
attributes to units using DWARF version 4 or later.
gdb/ChangeLog:
* dwarf2read.c (attr_value_as_address): New function.
(dwarf2_find_base_address, read_call_site_scope): Use
attr_value_as_address in place of DW_ADDR.
(dwarf2_get_pc_bounds): Use attr_value_as_address to get
the low and high addresses. Slight rework of the handling
of the high pc being a constant form, and limit it to
DWARF verson 4 or higher.
(dwarf2_record_block_ranges): Likewise.
(read_partial_die): Likewise.
(new_symbol_full): Use attr_value_as_address in place of DW_ADDR.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
* gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
* gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc.exp: New file.
Tested on x86_64-linux.
Right now the "file" command will discard the exec_bfd and then
possibly open a new one.
If this ends up reopening the same file, it can cause needless work by
gdb -- destroying all the per-BFD data just to re-read it again.
This patch changes the code to hold a reference to the old exec_bfd
while opening the new one.
The possible downside of this is a higher peak memory use.
2014-02-26 Tom Tromey <tromey@redhat.com>
* exec.c (exec_file_attach): Hold a reference to exec_bfd.
If minimal symbols have already been read into a per-BFD object, then
a symbol reader can skip re-reading them. This changes the ELF reader
to do so.
We only skip the work if the file is ELF+DWARF. If it has stabs or
mdebug sections, then I think extra information is computed during the
minsym creation pass; and so we must still repeat it. Eventually even
this will go away, once all symbol types have switched to being
progspace-independent. In the meantime this has no negative effect --
it is just a missing optimization for a small set of users.
This change also required a somewhat non-obvious change to the OBJSTAT
accounting code. If a symbol reader skips re-reading minimal symbols,
then the corresponding OBJSTAT will not be updated. This leads to a
test failure in gdb.base/maint.exp.
To fix this, I've moved the needed stat field out of objfile and into
the per-BFD object.
2014-02-26 Tom Tromey <tromey@redhat.com>
* elfread.c (elf_read_minimal_symbols): Return early if
minimal symbols have already been read. Add "ei" parameter.
(elf_symfile_read): Call elf_read_minimal_symbols earlier.
* minsyms.c (prim_record_minimal_symbol_full): Update.
* objfiles.h (struct objstats) <n_minsyms>: Move...
(struct objfile_per_bfd_storage) <n_minsyms>: ... here.
* symmisc.c (print_objfile_statistics): Update.
This is just a simple refactoring in elfread.c to split out the
minsym-reading code into its own function.
2014-02-26 Tom Tromey <tromey@redhat.com>
* elfread.c (elf_read_minimal_symbols): New function, from
elf_symfile_read.
(elf_symfile_read): Call it.
Now that minimal symbols are independent of the program space, we can
move them to the per-BFD object. This lets us save memory in the
multi-inferior case; and, once the symbol readers are updated, time.
The other prerequisite for this move is that all the objects referred
to by the minimal symbols have a lifetime at least as long as the
per-BFD object. I think this is satisfied partially by this patch
(moving the copied names there) and partially by earlier patches
moving the demangled name hash.
This patch contains a bit of logic to avoid creating new minimal
symbols if they have already been read for a given BFD. This allows
us to avoid trying to update all the symbol readers for this
condition. At first glance this may seem like a hack, but some symbol
readers mix psym and minsym reading, and would require logic just like
this regardless -- and it is simpler and less error-prone to just do
the work in a central spot.
2014-02-26 Tom Tromey <tromey@redhat.com>
* minsyms.c (lookup_minimal_symbol, iterate_over_minimal_symbols)
(lookup_minimal_symbol_text, lookup_minimal_symbol_by_pc_name)
(lookup_minimal_symbol_solib_trampoline)
(lookup_minimal_symbol_by_pc_section_1)
(lookup_minimal_symbol_and_objfile): Update.
(prim_record_minimal_symbol_full): Use the per-BFD obstack.
Don't allocate a minimal symbol if minsyms have already been read.
(build_minimal_symbol_hash_tables): Update.
(install_minimal_symbols): Do nothing if minsyms already read.
Use the per-BFD obstack.
(terminate_minimal_symbol_table): Use the per-BFD obstack.
* objfiles.c (allocate_objfile): Call
terminate_minimal_symbol_table later.
(have_minimal_symbols): Update.
* objfiles.h (struct objfile_per_bfd_storage) <msymbols,
minimal_symbol_count, msymbol_hash, msymbol_demangled_hash>:
Move from struct objfile.
<minsyms_read>: New field.
(struct objfile) <msymbols, minimal_symbol_count,
msymbol_hash, msymbol_demangled_hash>: Move.
(ALL_OBJFILE_MSYMBOLS): Update.
* symfile.c (read_symbols): Set minsyms_read.
(reread_symbols): Update.
* symmisc.c (dump_objfile, dump_msymbols): Update.
This removes the runtime offsets from minsyms. Instead, these offsets
will now be applied whenever the minsym's address is computed.
This patch redefines MSYMBOL_VALUE_ADDRESS to actually use the offsets
from the given objfile. Then, it updates all the symbol readers,
changing them so that they do not add in the section offset when
creating the symbol.
This change also lets us remove relocation of minsyms from
objfile_relocate1 and also msymbols_sort.
2014-02-26 Tom Tromey <tromey@redhat.com>
* minsyms.c (msymbols_sort): Remove.
* minsyms.h (msymbols_sort): Remove.
* objfiles.c (objfile_relocate1): Don't relocate minsyms.
* symtab.h (MSYMBOL_VALUE_ADDRESS): Use objfile offsets.
* elfread.c (elf_symtab_read): Don't add section offsets.
* xcoffread.c (record_minimal_symbol): Don't add section offset
to minimal symbol address.
* somread.c (text_offset, data_offset): Remove.
(som_symtab_read): Don't add section offsets to minimal symbol
addresses.
* coff-pe-read.c (add_pe_forwarded_sym, read_pe_exported_syms):
Don't add section offsets to minimal symbols.
* coffread.c (coff_symtab_read): Don't add section offsets
to minimal symbol addresses.
* machoread.c (macho_symtab_add_minsym): Don't add section offset
to minimal symbol addresses.
* mipsread.c (read_alphacoff_dynamic_symtab): Don't add
section offset to minimal symbol addresses.
* mdebugread.c (parse_partial_symbols): Don't add section
offset to minimal symbol addresses.
* dbxread.c (read_dbx_dynamic_symtab): Don't add section
offset to minimal symbol addresses.
This changes MSYMBOL_VALUE_ADDRESS to be an rvalue. In a later patch
we change this macro to compute its value; this patch introduces a
setter to make the break a bit cleaner.
2014-02-26 Tom Tromey <tromey@redhat.com>
* minsyms.c (prim_record_minimal_symbol_full): Use
SET_MSYMBOL_VALUE_ADDRESS.
* objfiles.c (objfile_relocate1): Use SET_MSYMBOL_VALUE_ADDRESS.
* sh64-tdep.c (sh64_elf_make_msymbol_special): Use
SET_MSYMBOL_VALUE_ADDRESS.
* symtab.h (MSYMBOL_VALUE_ADDRESS): Expand to an rvalue.
(SET_MSYMBOL_VALUE_ADDRESS): New macro.
This introduces minimal_symbol_upper_bound and changes various bits of
code to use it. Since this function is intimately tied to the
implementation of minimal symbol tables, I believe it belongs in
minsyms.c.
The new function is extracted from find_pc_partial_function_gnu_ifunc.
This isn't a "clean" move because the old function interleaved the
caching and the computation; but this doesn't make sense for the new
code.
2014-02-26 Tom Tromey <tromey@redhat.com>
* blockframe.c (find_pc_partial_function_gnu_ifunc): Use
bound minimal symbols. Move code that knows about minsym
table layout...
* minsyms.c (minimal_symbol_upper_bound): ... here. New
function.
* minsyms.h (minimal_symbol_upper_bound): Declare.
* objc-lang.c (find_objc_msgsend): Use bound minimal symbols,
minimal_symbol_upper_bound.
Consider the following type for which we would like to provide
a pretty-printer and manage it via RegexpCollectionPrettyPrinter:
typedef long time_t;
Currently, this does not work because this framework only considers
the type's tag name:
typename = gdb.types.get_basic_type(val.type).tag
if not typename:
return None
This patch extends it to use the type's name if the basic type
does not have a tag name, thus allowing the framework to also
work with typedefs like the above.
gdb/ChangeLog:
* python/lib/gdb/printing.py (RegexpCollectionPrettyPrinter):
Use the type's name if its basic type does not have a tag.
gdb/testsuite/ChangeLog:
* testsuite/gdb.python/py-pp-re-notag.c: New file.
* testsuite/gdb.python/py-pp-re-notag.ex: New file.
* testsuite/gdb.python/py-pp-re-notag.p: New file.
This comment explains why we sometimes sign-extend the range type
bounds when we normally shouldn't have to.
gdb/ChangeLog:
* dwarf2read.c (read_subrange_type): Add comment.
Consider the following Ada code:
-- An array whose index is an enumeration type with 128 enumerators.
type Enum_T is (Enum_000, Enum_001, [...], Enum_128);
type Table is array (Enum_T) of Boolean;
When the compiler is configured to generate pure DWARF debugging info,
trying to print type Table's description yields:
ptype pck.table
type = array (enum_000 .. -128) of boolean
The expected output was:
ptype pck.table
type = array (enum_000 .. enum_128) of boolean
The DWARF debugging info for our array looks like this:
<1><44>: Abbrev Number: 5 (DW_TAG_array_type)
<45> DW_AT_name : pck__table
<50> DW_AT_type : <0x28>
<2><54>: Abbrev Number: 6 (DW_TAG_subrange_type)
<55> DW_AT_type : <0x5c>
<59> DW_AT_lower_bound : 0
<5a> DW_AT_upper_bound : 128
The array index type is, by construction with the DWARF standard,
a subrange of our enumeration type, defined as follow:
<2><5b>: Abbrev Number: 0
<1><5c>: Abbrev Number: 7 (DW_TAG_enumeration_type)
<5d> DW_AT_name : pck__enum_t
<69> DW_AT_byte_size : 1
<2><6b>: Abbrev Number: 8 (DW_TAG_enumerator)
<6c> DW_AT_name : pck__enum_000
<7a> DW_AT_const_value : 0
[etc]
Therefore, while processing these DIEs, the array index type ends
up being a TYPE_CODE_RANGE whose target type is our enumeration type.
But the problem is that we read the upper bound as a negative value
(-128), which is then used as is by the type printer to print the
array upper bound. This negative value explains the "-128" in the
output.
To understand why the range type's upper bound is read as a negative
value, one needs to look at how it is determined, in read_subrange_type:
orig_base_type = die_type (die, cu);
base_type = check_typedef (orig_base_type);
[... high is first correctly read as 128, but then ...]
if (!TYPE_UNSIGNED (base_type) && (high & negative_mask))
high |= negative_mask;
The negative_mask is applied, here, because BASE_TYPE->FLAG_UNSIGNED
is not set. And the reason for that is because the base_type was only
partially constructed during the call to die_type. While the enum
is constructed on the fly by read_enumeration_type, its flag_unsigned
flag is only set later on, while creating the symbols corresponding to
the enum type's enumerators (see process_enumeration_scope), after
we've already finished creating our range type - and therefore too
late.
My first naive attempt at fixing this problem consisted in extracting
the part in process_enumeration_scope which processes all enumerators,
to generate the associated symbols, but more importantly set the type's
various flags when necessary. However, this does not always work well,
because we're still in the subrange_type's scope, and it might be
different from the scope where the enumeration type is defined.
So, instead, what this patch does to fix the issue is to extract
from process_enumeration_scope the part that determines whether
the enumeration type should have the flag_unsigned and/or the
flag_flag_enum flags set. It turns out that, aside from the code
implementing the loop, this part is fairly independent of the symbol
creation. With that part extracted, we can then use it at the end
of our enumeration type creation, to produce a type which should now
no longer need any adjustment.
Once the enumeration type produced is correctly marked as unsigned,
the subrange type's upper bound is then correctly read as an unsigned
value, therefore giving us an upper bound of 128 instead of -128.
gdb/ChangeLog:
* dwarf2read.c (update_enumeration_type_from_children): New
function, mostly extracted from process_structure_scope.
(read_enumeration_type): Call update_enumeration_type_from_children.
(process_enumeration_scope): Do not set THIS_TYPE's flag_unsigned
and flag_flag_enum fields.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files.
Whatever the comment about deprecated_xfer_memory referred to,
deprecated_xfer_memory is gone now. There's no need to install a
target method that just delegates, as that's what the default
delegator does already.
Tested by building an --enable-targets=all gdb on x86_64 Fedora 17.
gdb/
2014-02-26 Pedro Alves <palves@redhat.com>
* bsd-uthread.c (bsd_uthread_xfer_partial): Delete function.
(bsd_uthread_target): Don't install bsd_uthread_xfer_partial as
to_xfer_partial method.
As no target uses it anymore, it can finally go away.
After removing the deprecated_xfer_memory handling from
default_xfer_partial, we can delete the latter, because the only thing
it does is delegate to the target beneath unconditionally, which is
what the delegator installed by target-delegates.c will do for us if
no to_xfer_partial method is installed.
This was the last user of de_fault, so that goes away too.
Tested on x86_64 Fedora 17.
gdb/
2014-02-26 Pedro Alves <palves@redhat.com>
* target.c (complete_target_initialization): Don't install
default_xfer_partial as to_xfer_partial hook.
(nomemory): Delete.
(update_current_target): Don't INHERIT nor de_fault
deprecated_xfer_memory. Delete de_fault macro.
(default_xfer_partial, deprecated_debug_xfer_memory): Delete.
(setup_target_debug): Don't install a deprecated_xfer_memory hook.
* target.h (struct target_ops) <deprecated_xfer_memory>: Delete
field.
This removes yet another instance of a deprecated_xfer_memory user.
Unfortunately djgpp's write_child function takes a non-const buffer
pointer, while GDB's xfer_partial api passes a const pointer. To be
const-correct, we need to copy that buffer to a non-const buffer, and
pass the copy to write_child. This is actually what
target.c:default_xfer_partial itself does, when calling into the
ops->deprecated_xfer_memory hook.
Tested by cross-building djgpp gdb, on x86-64 Fedora 17.
gdb/
2014-02-26 Pedro Alves <palves@redhat.com>
* go32-nat.c (my_write_child): New function.
(go32_xfer_memory): Rewrite as to_xfer_partial helper.
(go32_xfer_partial): New function.
(init_go32_ops): Don't install a deprecated_xfer_memory hook.
Instead install a to_xfer_partial hook.
This removes yet another instance of a deprecated_xfer_memory user.
Completely untested.
gdb/
2014-02-26 Pedro Alves <palves@redhat.com>
* nto-procfs.c (procfs_xfer_memory): Adjust interface as a
to_xfer_partial helper. Rewrite.
(procfs_xfer_partial): New function.
(init_procfs_ops): Don't install a deprecated_xfer_memory hook.
Install a to_xfer_partial hook.
This removes yet another instance of a deprecated_xfer_memory user.
Tested by building a --enable-targets=all gdb, on x86-64 Fedora 17.
gdb/
2014-02-26 Pedro Alves <palves@redhat.com>
* remote-m32r-sdi.c (send_data): Constify 'buf' parameter.
(m32r_xfer_memory): Adjust as a to_xfer_partial helper.
(m32r_xfer_partial): New function.
(init_m32r_ops): Don't install a deprecated_xfer_memory hook.
Install a to_xfer_partial hook.
This removes another yet instance of a deprecated_xfer_memory user.
Tested by building a --enable-targets=all gdb, on x86-64 Fedora 17.
gdb/
2014-02-26 Pedro Alves <palves@redhat.com>
* remote-mips.c (mips_xfer_memory): Adjust as to_xfer_partial
helper.
(mips_xfer_partial): New function.
(_initialize_remote_mips): Don't install a deprecated_xfer_memory
hook. Install a to_xfer_partial hook.
Consider the following declarations in Ada...
type Item is range -32 .. 31;
for Item'Size use 6;
type Table is array (Natural range 0 .. 4) of Item;
pragma Pack (Table);
... which declare a packed array whose elements are 6 bits long.
The debugger currently does not notice that the array is packed,
and thus prints values of this type incorrectly. This can be seen
in the "ptype" output:
(gdb) ptype table
type = array (0 .. 4) of foo.item
Normally, the debugger should print:
(gdb) ptype table
type = array (0 .. 4) of foo.item <packed: 6-bit elements>
The debugging information for this array looks like this:
.uleb128 0xf # (DIE (0x15c) DW_TAG_array_type)
.long .LASF9 # DW_AT_name: "pck__table"
.byte 0x6 # DW_AT_bit_stride
.long 0x1a9 # DW_AT_type
.uleb128 0x10 # (DIE (0x16a) DW_TAG_subrange_type)
.long 0x3b # DW_AT_type
.byte 0 # DW_AT_lower_bound
.byte 0x4 # DW_AT_upper_bound
.byte 0 # end of children of DIE 0x15c
The interesting part is the DW_AT_bit_stride attribute, which tells
the size of the array elements is 6 bits, rather than the normal
element type's size.
This patch adds support for this attribute by first creating
gdbtypes.c::create_array_type_with_stride, which is an enhanced
version of create_array_type taking an extra parameter as the stride.
The old create_array_type can then be re-implemented very simply
by calling the new create_array_type_with_stride.
We can then use this new function from dwarf2read, to create
arrays with or without stride.
gdb/ChangeLog:
* gdbtypes.h (create_array_type_with_stride): Add declaration.
* gdbtypes.c (create_array_type_with_stride): New function,
renaming create_array_type, but with an added parameter
called "bit_stride".
(create_array_type): Re-implement using
create_array_type_with_stride.
* dwarf2read.c (read_array_type): Add support for DW_AT_byte_stride
and DW_AT_bit_stride attributes.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/arr-stride.c: New file.
* gdb.dwarf2/arr-stride.exp: New file.
The test, relying purely on generating an assembly file, only
verifies the type description of our array. But I was also
able to verify manually that the debugger print values of these
types correctly as well (which was not the case prior to this
patch).
With the test changed as in the patch, against current mainline, we get:
(gdb) PASS: gdb.ada/tasks.exp: info tasks before inserting breakpoint
break break_me task 1
Breakpoint 2 at 0x4030b0: file /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.ada/tasks/foo.adb, line 27.
(gdb) PASS: gdb.ada/tasks.exp: break break_me task 1
break break_me task 3
Note: breakpoint 2 also set at pc 0x4030b0.
Breakpoint 3 at 0x4030b0: file /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.ada/tasks/foo.adb, line 27.
(gdb) PASS: gdb.ada/tasks.exp: break break_me task 3
continue
Continuing.
[Switching to Thread 0x7ffff7dc7700 (LWP 27133)]
Breakpoint 2, foo.break_me () at /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.ada/tasks/foo.adb:27
27 null;
(gdb) FAIL: gdb.ada/tasks.exp: continue to breakpoint
info tasks
ID TID P-ID Pri State Name
1 63b010 48 Waiting on RV with 3 main_task
2 63bd80 1 48 Accept or Select Term task_list(1)
* 3 63f510 1 48 Accepting RV with 1 task_list(2)
4 642ca0 1 48 Accept or Select Term task_list(3)
(gdb) PASS: gdb.ada/tasks.exp: info tasks after hitting breakpoint
The breakpoint that caused a stop is breakpoint 3, but GDB end up
reporting (and running breakpoint commands of) "Breakpoint 2" instead.
The issue is that the bpstat_check_breakpoint_conditions logic of
"wrong thread" is missing the "wrong task" check. This is usually
harmless, because the thread hop code in infrun.c code that handles
wrong-task-hitting-breakpoint does check for task-specific breakpoints
(within breakpoint_thread_match):
/* Check if a regular breakpoint has been hit before checking
for a potential single step breakpoint. Otherwise, GDB will
not see this breakpoint hit when stepping onto breakpoints. */
if (regular_breakpoint_inserted_here_p (aspace, stop_pc))
{
if (!breakpoint_thread_match (aspace, stop_pc, ecs->ptid))
thread_hop_needed = 1;
}
IOW, usually, when one only has a task specific breakpoint at a given
address, things work correctly. Put another task-specific or
non-task-specific breakpoint there, and things break.
A patch that eliminates the special thread hop code in infrun.c is
what exposed this, as after that GDB solely relies on
bpstat_check_breakpoint_conditions to know whether the right or wrong
task hit a breakpoint. IOW, given the latent bug, Ada task-specific
breakpoints become non-task-specific, and that is caught by the
testsuite, as:
break break_me task 3
Breakpoint 2 at 0x4030b0: file /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.ada/tasks/foo.adb, line 27.
(gdb) PASS: gdb.ada/tasks.exp: break break_me task 3
continue
Continuing.
[Switching to Thread 0x7ffff7fcb700 (LWP 17122)]
Breakpoint 2, foo.break_me () at /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.ada/tasks/foo.adb:27
27 null;
(gdb) PASS: gdb.ada/tasks.exp: continue to breakpoint
info tasks
ID TID P-ID Pri State Name
1 63b010 48 Waiting on RV with 2 main_task
* 2 63bd80 1 48 Accepting RV with 1 task_list(1)
3 63f510 1 48 Accept or Select Term task_list(2)
4 642ca0 1 48 Accept or Select Term task_list(3)
(gdb) FAIL: gdb.ada/tasks.exp: info tasks after hitting breakpoint
It was after seeing this that I thought of how to expose the bug with
current mainline.
Tested on x86_64 Fedora 17.
gdb/
2014-02-26 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_check_breakpoint_conditions): Handle
task-specific breakpoints.
gdb/testsuite/
2014-02-26 Pedro Alves <palves@redhat.com>
* gdb.ada/tasks.exp: Set a task-specific breakpoint at break_me
that won't ever trigger. Make sure that GDB reports the correct
breakpoint that caused the stop.
[description of this patch and ChangeLog entry by Joel Brobecker]
The recent implementation was questionable, and if it worked, it was
only by chance because the requested length is large enough that only
one read was sufficient. Note that the implementation before that
also made that assumption, in the form of only handling
TARGET_OBJECT_UNWIND_TABLE xfer requests when offset was zero.
gdb/ChangeLog:
* ia64-linux-nat.c (ia64_linux_xfer_partial): Reimplement
handling of object == TARGET_OBJECT_UNWIND_TABLE.
This removes target_ignore, which isn't used any more.
2014-02-25 Tom Tromey <tromey@redhat.com>
* target.h (target_ignore): Don't declare.
* target.c (target_ignore): Remove.
Fix auto-load 7.7 regression,
the regression affects any loading from /usr/share/gdb/auto-load .
5b2bf9471f is the first bad commit
commit 5b2bf9471f
Author: Doug Evans <xdje42@gmail.com>
Date: Fri Nov 29 21:29:26 2013 -0800
Move .debug_gdb_script processing to auto-load.c.
Simplify handling of auto-loaded objfile scripts.
Fedora 20 x86_64
$ gdb -q /usr/lib64/libgobject-2.0.so
Reading symbols from /usr/lib64/libglib-2.0.so.0.3800.2...Reading symbols from
/usr/lib/debug/usr/lib64/libglib-2.0.so.0.3800.2.debug...done.
done.
(gdb) _
Fedora Rawhide x86_64
$ gdb -q /usr/lib64/libgobject-2.0.so
Reading symbols from /usr/lib64/libglib-2.0.so...Reading symbols from
/usr/lib/debug/usr/lib64/libglib-2.0.so.0.3990.0.debug...done.
done.
warning: File "/usr/lib64/libglib-2.0.so.0.3990.0-gdb.py" auto-loading has been declined by your `auto-load safe-path'
set to "$debugdir:$datadir/auto-load:/usr/bin/mono-gdb.py".
To enable execution of this file add
add-auto-load-safe-path /usr/lib64/libglib-2.0.so.0.3990.0-gdb.py
line to your configuration file "/home/jkratoch/.gdbinit".
To completely disable this security protection add
set auto-load safe-path /
line to your configuration file "/home/jkratoch/.gdbinit".
For more information about this security protection see the
"Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
info "(gdb)Auto-loading safe path"
(gdb) _
That is it tries to load "forbidden"
/usr/lib64/libglib-2.0.so.0.3990.0-gdb.py
but it should load instead
/usr/share/gdb/auto-load/usr/lib64/libglib-2.0.so.0.3990.0-gdb.py*
Although that is also not exactly this way, there does not exist any
/usr/lib64/libglib-2.0.so.0.3990.0-gdb.py
despite regressed GDB says so.
gdb/
2014-02-24 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/16626
* auto-load.c (auto_load_objfile_script_1): Change filename to
debugfile.
gdb/testsuite/
2014-02-24 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/16626
* gdb.base/auto-load-script: New file.
* gdb.base/auto-load.c: New file.
* gdb.base/auto-load.exp: New file.
Message-ID: <20140223212400.GA8831@host2.jankratochvil.net>
ia64-linux-nat.c no longer compiles because ia64_linux_xfer_partial
no longer matches the to_xfer_partial prototype. This patch fixes
the problem by adjusting it accordingly.
gdb/ChangeLog:
* ia64-linux-nat.c (ia64_linux_xfer_partial): Add function
documentation. Adjust prototype to match the target_ops
to_xfer_partial method. Adjust implementation accordingly.
This patch changes rl78-tdep.c so that a 16-bit type is used for
register pairs instead of a pointer type as was previously the case.
This will cause these register pairs to be displayed as integers
instead of as a data address with a 0xf0000 ORed in.
E.g. registers ax, bc, de, and hl might now be displayed like this:
(gdb) info registers ax bc de hl
ax 0x6 6
bc 0x0 0
de 0x10c3 4291
hl 0x108d 423
Whereas, before, they were displayed as follows:
(gdb) info registers ax bc de hl
ax 0xf0006 0xf0006
bc 0xf0000 0xf0000
de 0xf10c3 0xf10c3
hl 0xf108d 0xf108d
These pairs are 16 bit quantities and should be displayed as such.
This change also affects the way that the banked register pairs are
displayed. Within GDB, the banked register pairs are named bank0_rp0,
bank0_rp1, .., bank3_rp2, bank3_rp3.
However, these register pairs need to be used as addresses in DWARF
expressions. I have added 16 pseudo registers corresponding to banked
register pairs. These new pseudo registers are all hidden from the
user and have a pointer type. Values from these registers are
intended to be used in DWARF expressions. Therefore,
rl78_dwarf_reg_to_regnum() has been adjusted to return these new
pseudo register numbers.
I had a much simpler patch which only changed the types, but it showed
a number of regressions due to integer values from the banked register
pairs being used as part of an address expression. This current patch
shows no regressions and now displays values of register pairs
correctly.
* rl78-tdep.c ( RL78_BANK0_RP0_PTR_REGNUM, RL78_BANK0_RP1_PTR_REGNUM)
(RL78_BANK0_RP2_PTR_REGNUM, RL78_BANK0_RP3_PTR_REGNUM)
(RL78_BANK1_RP0_PTR_REGNUM, RL78_BANK1_RP1_PTR_REGNUM)
(RL78_BANK1_RP2_PTR_REGNUM, RL78_BANK1_RP3_PTR_REGNUM)
(RL78_BANK2_RP0_PTR_REGNUM, RL78_BANK2_RP1_PTR_REGNUM)
(RL78_BANK2_RP2_PTR_REGNUM, RL78_BANK2_RP3_PTR_REGNUM)
(RL78_BANK3_RP0_PTR_REGNUM, RL78_BANK3_RP1_PTR_REGNUM)
(RL78_BANK3_RP2_PTR_REGNUM, RL78_BANK3_RP3_PTR_REGNUM):
New constants.
(rl78_register_type): Use a data pointer type for SP and
new pseudo registers mentioned above. Use a 16 bit integer
type for all other register pairs.
(rl78_register_name, rl78_g10_register_name): Update for
new pseudo registers.
(rl78_pseudo_register_read): Likewise.
(rl78_pseudo_register_write): Likewise.
(rl78_dwarf_reg_to_regnum): Return register numbers representing
to the newly added pseudo registers.
This removes yet another instance of a deprecated_xfer_memory user,
and fixes a nasty regression as a side-effect:
(gdb) start
Temporary breakpoint 1 at 0x19070: file simple_main.adb, line 4.
Starting program: /[...]/simple_main
Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x19070
Cannot insert breakpoint -3.
Temporarily disabling shared library breakpoints:
breakpoint #-3
The regression was introduced by the to_xfer_partial transition
to return a status enum. procfs_xfer_partial was updated but
not the case where object is TARGET_OBJECT_MEMORY. As result,
procfs_xfer_partial was returning the length xfered rather than
the status, and the xfered buffer was left uninitialized.
gdb/
2014-02-19 Pedro Alves <palves@redhat.com>
* procfs.c (procfs_target): Don't install procfs_xfer_memory as
deprecated_xfer_memory hook.
(procfs_xfer_partial): Call procfs_xfer_memory instead
of the deprecated_xfer_memory target hook.
(procfs_xfer_memory): Adjust interface as a to_xfer_partial
helper.
A GDB internal error is found on native mingw32 target.
(gdb) run
../../binutils-gdb/gdb/target.c:1483: internal-error:
target_xfer_partial: Assertion `*xfered_len > 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This error was introduced by the following snippet in commit
9b409511d0
> @@ -2536,27 +2538,30 @@ windows_xfer_shared_libraries (struct target_ops *ops,
> }
>
> obstack_free (&obstack, NULL);
> - return len;
> + *xfered_len = (ULONGEST) len;
> + return TARGET_XFER_OK;
> }
In the original code, len is returned, which could be 0, but after that
commit, only TARGET_XFER_OK is returned, which is wrong. If len is 0,
TARGET_XFER_EOF should be returned. (it is 0 in enum
target_xfer_status declaration).
gdb:
2014-02-24 Yuanhui Zhang <asmwarrior@gmail.com>
* windows-nat.c (windows_xfer_shared_libraries): Return
TARGET_XFER_EOF if LEN is zero to fix an assert failure when
requested object is TARGET_OBJECT_LIBRARIES.
Nowadays, TARGET_XFER_E_UNAVAILABLE isn't regarded as an error in
to_xfer_partial interface, so _E_ looks odd. This patch is to
replace TARGET_XFER_E_UNAVAILABLE with TARGET_XFER_UNAVAILABLE,
and change its value from -2 to 2. Since there is no comparison
on the value of 'enum target_xfer_status', so it should be safe.
gdb:
2014-02-24 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_status)
<TARGET_XFER_E_UNAVAILABLE>: Rename it to ...
<TARGET_XFER_UNAVAILABLE>: ... it with setting value 2
explicitly. New.
* corefile.c (memory_error_message): User updated.
* exec.c (section_table_read_available_memory): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* target.c (target_xfer_status_to_string): Likewise.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1, target_xfer_partial): Likewise.
* valops.c (read_value_memory): Likewise.
* exec.h: Update comments.
This patch tweaks target_xfer_status_to_string on comments and argument
name.
gdb:
2014-02-24 Yao Qi <yao@codesourcery.com>
* target.c (target_xfer_status_to_string): Rename argument err
to status.
* target.h (target_xfer_status_to_string): Update declaration.
Replace target_xfer_error_to_string with
target_xfer_status_to_string in comment.
When I build mips native gdb today, I get the follow error,
../../../git/gdb/mips-linux-nat.c: In function '_initialize_mips_linux_nat':
../../../git/gdb/mips-linux-nat.c:792:15: error: assignment from incompatible pointer type [-Werror]
cc1: all warnings being treated as errors
It looks an oversight of recent target_ops delegation patches. This
patch is to fix the build error.
gdb:
2014-02-24 Yao Qi <yao@codesourcery.com>
* mips-linux-nat.c (super_close): Update its type.
(mips_linux_close): Pass 'self' to super_close.
This patch removes macro TARGET_XFER_STATUS_ERROR_P, as Pedro pointed
out during patches review that TARGET_XFER_STATUS_ERROR_P tends to
be unnecessary.
gdb:
2014-02-24 Yao Qi <yao@codesourcery.com>
* target.h (TARGET_XFER_STATUS_ERROR_P): Remove.
* corefile.c (read_memory): Adjusted.
* target.c (target_write_with_progress): Adjusted.
As we migrate to the new to_xfer_partial interface, some of previous
tweaks become unnecessary, we don't have to check traceframe is
selected in each target implementation, so this patch below is
reverted.
[PATCH] Send qXfer:traceframe-info:read when traceframe is selected.
https://sourceware.org/ml/gdb-patches/2013-10/msg00752.html
Third, to_traceframe_info is only called when traceframe is selected,
that means it is only called when target is remote, tfile or ctf, so
this patch can be partially reverted,
https://sourceware.org/ml/gdb-patches/2013-04/msg00000.html
gdb:
2014-02-23 Yao Qi <yao@codesourcery.com>
Revert two patches:
2013-10-25 Yao Qi <yao@codesourcery.com>
* remote.c (remote_traceframe_info): Return early if
traceframe is not selected.
2013-07-19 Yao Qi <yao@codesourcery.com>
* target.c (update_current_target): Change the default action
of 'to_traceframe_info' from tcomplain to return_zero.
* target.h (struct target_ops) <to_traceframe_info>: Add more
comments.
As the new to_xfer_partial implementations are done in ctf and tfile
targets, read_value_memory can be simplified a lot. Call
target_xfer_partial in a loop, check return value, and set bytes
unavailable when necessary.
gdb:
2014-02-23 Yao Qi <yao@codesourcery.com>
* valops.c (read_value_memory): Rewrite it. Call
target_xfer_partial in a loop.
* exec.h (section_table_available_memory): Remove declaration.
Move comments to ...
* exec.c (section_table_available_memory): ... here. Make it static.
This patch adjust both ctf and tfile target implementation of to_xfer_partial,
to return TARGET_XFER_E_UNAVAILABLE and set *XFERED_LEN if data is
unavailable. Note that some code on xfer in exec.c can be shared, but
we can do it in a separate pass later.
gdb:
2014-02-23 Yao Qi <yao@codesourcery.com>
* exec.c (section_table_read_available_memory): New function.
* exec.h (section_table_read_available_memory): Declare.
* ctf.c (ctf_xfer_partial): Call
section_table_read_available_memory.
* tracefile-tfile.c (tfile_xfer_partial): Likewise.
In the to_xfer_partial implementations of ctf and tfile, the code on
reading from read-only sections is duplicated. This patch moves it to
a separate function exec_read_partial_read_only.
gdb:
2014-02-23 Yao Qi <yao@codesourcery.com>
* ctf.c (ctf_xfer_partial): Move code to ...
* exec.c (exec_read_partial_read_only): ... it. New function.
* tracefile-tfile.c (tfile_xfer_partial): Likewise.
* tracefile.c: Include "exec.h".
* exec.h (exec_read_partial_read_only): Declare.
At present, tfile target thinks it has memory but ctf doesn't.
This is an oversight when I added ctf target support. This patch
moves the implementations of to_has_all_memory and to_has_memory to
upper layer. After this change, both tfile and ctf target think
they have memory.
gdb:
2014-02-23 Yao Qi <yao@codesourcery.com>
* tracefile-tfile.c (tfile_has_all_memory): Remove.
(tfile_has_memory): Remove.
(init_tfile_ops): Don't set fields to_has_all_memory and
to_has_memory of tfile_ops.
* tracefile.c (tracefile_has_all_memory): New function.
(tracefile_has_memory): New function.
(init_tracefile_ops): Initialize fields to_has_all_memory and
to_has_memory of 'ops'.
This patch move the duplicated code between tfile and ctf
targets into file tracefile.c. The common part of target_ops
fields are set in init_tracefile_ops.
gdb:
2014-02-23 Yao Qi <yao@codesourcery.com>
* ctf.c (ctf_has_stack, ctf_has_registers): Remove.
(ctf_thread_alive, ctf_get_trace_status): Remove.
(init_ctf_ops): Don't set some fields of ctf_ops. Call
init_tracefile_ops.
* tracefile-tfile.c (tfile_get_trace_status): Remove.
(tfile_has_stack, tfile_has_registers): Remove.
(tfile_thread_alive): Remove.
(init_tfile_ops): Don't set some fields of tfile_ops. Call
init_tracefile_ops.
* tracefile.c (tracefile_has_stack): New function.
(tracefile_has_registers): New function.
(tracefile_thread_alive): New function.
(tracefile_get_trace_status): New function.
(init_tracefile_ops): New function.
* tracefile.h (init_tracefile_ops): Declare.
This patch is a refactor which moves trace file writer related code
out of tracepoint.c, which has 6k LOC. It moves general trace file
writer to a new file tracefile.c and moves tfile specific writer to
tracefile-tfile.c.
gdb:
2014-02-23 Yao Qi <yao@codesourcery.com>
* Makefile.in (REMOTE_OBS): Append tracefile.o and
tracefile-tfile.o.
(HFILES_NO_SRCDIR): Add tracefile.h.
* ctf.c: Include "tracefile.h".
* tracefile.h: New file.
* tracefile.c: New file
* tracefile-tfile.c: New file.
* tracepoint.c: Include "tracefile.h".
(free_uploaded_tps, free_uploaded_tsvs): Remove declarations.
(stop_reason_names): Add const.
(trace_file_writer_xfree): Move it to tracefile.c.
(trace_save, trace_save_command, trace_save_tfile): Likewise.
(trace_save_ctf): Likewise.
(struct tfile_trace_file_writer): Move it to tracefile-tfile.c.
(tfile_target_save, tfile_dtor, tfile_start): Likewise.
(tfile_write_header, tfile_write_regblock_type): Likewise.
(tfile_write_status, tfile_write_uploaded_tsv): Likewise.
(tfile_write_uploaded_tp, tfile_write_definition_end): Likewise.
(tfile_write_raw_data, tfile_end): Likewise.
(tfile_trace_file_writer_new): Likewise.
(free_uploaded_tp): Make it extern.
(free_uploaded_tsv): Make it extern.
(_initialize_tracepoint): Move code to register command 'tsave'
to tracefile.c.
* tracepoint.h (stop_reason_names): Declare.
(struct trace_frame_write_ops): Move it to tracefile.h.
(struct trace_file_write_ops): Likewise.
(struct trace_file_writer): Likewise.
(free_uploaded_tsvs, free_uploaded_tps): Declare.
info os processes -fsanitize=address error
https://sourceware.org/bugzilla/show_bug.cgi?id=16594
info os processes
=================================================================
==5795== ERROR: AddressSanitizer: heap-use-after-free on address
0x600600214974 at pc 0x757a92 bp 0x7fff95dd9f00 sp 0x7fff95dd9ef0
READ of size 4 at 0x600600214974 thread T0
#0 0x757a91 in get_cores_used_by_process (.../gdb/gdb+0x757a91)
At least Fedora 20 has process(es):
6678 ? Ss 0:00 /usr/lib/systemd/systemd --user
6680 ? S 0:00 \_ (sd-pam)
and GDB "info os processes" crashes on it as /proc/6680/stat contains:
6680 ((sd-pam)) S 6678 6678 6678 0 -1 1077961024 33 0 0 0 0 0 0 0 20 0 1 0 18568 73768960 120 18446744073709551615 1 1
0 0 0 0 0 4096 0 18446744073709551615 0 0 17 6 0 0 0 0 0 0 0 0 0 0 0 0 0
and GDB fails to find the proper end of the process name "((sd-pam))".
Therefore it reads core number off-by-one (it reads 17 instead of 6) and
overruns the array.
(1) Make the process name parsing more foolproof.
(2) Do not trust the parsed number from /proc/PID/stat and verify it against
the array size.
I noticed that 'ps' gets this right, so I've peeked at its
sources, and it just looks for the first ')' starting at
the end.
dc072aced7:proc/readproc.c
Look for stat2proc.
Given ps does that, I believe the kernel won't ever be changed
in a way that would break it. So it sounds like could do strrchr
from the end of stat just as well without worry, which is simpler.
gdb/
2014-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/16594
* common/linux-osdata.c (linux_common_core_of_thread): Find the end of
process name.
(get_cores_used_by_process): New parameter num_cores, use it.
(linux_xfer_osdata_processes): Pass num_cores to it.
* linux-tdep.c (linux_info_proc, linux_fill_prpsinfo): Find the end of
process name.
Message-ID: <20140217212826.GA15080@host2.jankratochvil.net>
The patch "return target_xfer_status in to_xfer_partial" caused a
regression in various s390(x) test cases, because memory_xfer_partial
filled only the first byte of the read buffer from a breakpoint shadow:
https://sourceware.org/ml/gdb-patches/2014-01/msg01071.html
This patch fixes the regression.
I realized that the name of this test only made sense when considering
the old (never committed) implementation of the fix that came along
with the test originally, that forced a schedlock while a step-resume
(to get over the signal handler) was inserted. The final solution
that went into the tree does not force that locking.
So this renames it to something more descriptive.
gdb/testsuite/
2014-02-21 Pedro Alves <palves@redhat.com>
* gdb.threads/step-after-sr-lock.c: Rename to ...
* gdb.threads/signal-while-stepping-over-bp-other-thread.c: ... this.
* gdb.threads/step-after-sr-lock.exp: Rename to ...
* gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
... this.
This is the continuation of what Joel proposed on:
<https://sourceware.org/ml/gdb-patches/2013-12/msg00977.html>
Now that I have already submitted and pushed the patch to split
i386_stap_parse_special_token into two smaller functions, it is indeed
simpler to understand this patch.
It occurs because, on x86, triplet displacement operands are allowed
(like "-4+8-20(%rbp)"), and the current parser for this expression is
buggy. It does not correctly extract the register name from the
expression, which leads to incorrect evaluation. The parser was also
being very "generous" with the expression, so I included a few more
checks to ensure that we're indeed dealing with a triplet displacement
operand.
This patch also includes testcases for the two different kind of
expressions that can be encountered on x86: the triplet displacement
(explained above) and the three-argument displacement (as in
"(%rbx,%ebx,-8)"). The tests are obviously arch-dependent and are
placed under gdb.arch/.
Message-ID: <m3mwj1j12v.fsf@redhat.com>
URL: <https://sourceware.org/ml/gdb-patches/2014-01/msg00310.html>
gdb/
2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR tdep/16397
* i386-tdep.c (i386_stap_parse_special_token_triplet): Check if a
number comes after the + or - signs. Adjust length of register
name to be extracted.
gdb/testsuite/
2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR tdep/16397
* gdb.arch/amd64-stap-special-operands.exp: New file.
* gdb.arch/amd64-stap-three-arg-disp.S: Likewise.
* gdb.arch/amd64-stap-three-arg-disp.c: Likewise.
* gdb.arch/amd64-stap-triplet.S: Likewise.
* gdb.arch/amd64-stap-triplet.c: Likewise.
The AIX linker pointed out that gdb had multiple definitions of the
various *_varobj_ops objects. This patch fixes the problem by marking
the declarations as "extern" in varobj.h. Tested by rebuilding on
x86-64 Fedora 18 and on AIX.
2014-02-20 Tom Tromey <tromey@redhat.com>
* varobj.h (c_varobj_ops, cplus_varobj_ops, java_varobj_ops)
(ada_varobj_ops): Mark "extern".
I happened to notice that last_o_file_start is write-only in
read_dbx_symtab. This patch removes it. Tested by rebuilding.
2014-02-20 Tom Tromey <tromey@redhat.com>
* dbxread.c (read_dbx_symtab): Remove last_o_file_start.
The arm-elf assembler chokes on the extra parameters in the .section
pseudo-op, so this patch removes them.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-icycle.S: Remove second and third parameters
in .section pseudo-op.
* dwarf2read.c (struct die_info): New member in_process.
(reset_die_in_process): New function.
(process_die): Set it at the start, reset when returning.
(inherit_abstract_dies): Only call process_die if origin_child_die
not already being processed.
testsuite/
* gdb.dwarf2/dw2-icycle.S: New file.
* gdb.dwarf2/dw2-icycle.c: New file.
* gdb.dwarf2/dw2-icycle.exp: New file.
This patch brings back a comment that got stripped down a bit too much
during a recent change.
gdb/ChangeLog:
* windows-nat.c (handle_unload_dll): Add function documentation.
(do_initial_windows_stuff): Add comment explaining why we wait
until after inferior initialization has finished before
processing all DLLs.
Now that get_module_name is no longer called for handling DLL events,
we can simplify it a bit, knowing that the only use is to get the
executable's filename.
While doing so, we adjusted the implementation a bit to avoid
references to DLLs, renamed it to make its more-targeted usage
more explicit, moved it right before the only function that uses it.
We also remove the use of hard-coded length for the buffers being
used.
gdb/ChangeLog:
* windows-nat.c (get_module_name): Delete.
(windows_get_exec_module_filename): New function, mostly
inspired from get_module_name.
(windows_pid_to_exec_file): Replace call to get_module_name
by call to windows_get_exec_module_filename.
When a DLL gets loaded an the debugger gets a debug event about it,
the currently implementation in handle_load_dll currently tries to
fetch the DLL's name by first iterating over all DLLs known to
the system. It should be sufficient to rely on the name provided
with the event, however, especially in the situation we are now,
where we now know that we're past the statup phase for our inferior.
This patch therefore simplifies windows-nat.c::handle_load_dll to
only rely on the event's lpImageName.
It also updates the function's comment to document the assumption
regarding not being during the inferior's startup phase. And while
at it, it fixes the function documentation, which was probably
unintentionally inherited from another function (perhaps windows_wait).
gdb/ChangeLog:
* windows-nat.c (handle_load_dll): Rewrite this function's
introductory comment. Remove code using get_module_name
to get the DLL's name.
This patch aims at simplifying DLL handling during the inferior
initialization (process creation during the "run", or during an
"attach"). Instead of processing each DLL load event, which is
sometimes incomplete, we ignore these events until the inferior
has completed its startup phase, and then just iterate over all
DLLs via EnumProcessModules.
gdb/ChangeLog:
* windows-nat.c (get_windows_debug_event): Ignore
LOAD_DLL_DEBUG_EVENT and UNLOAD_DLL_DEBUG_EVENT
if windows_initialization_done == 0.
(windows_add_all_dlls): Renames windows_ensure_ntdll_loaded.
Adjust implementation to always load all DLLs.
(do_initial_windows_stuff): Replace call to
windows_ensure_ntdll_loaded by call to windows_add_all_dlls.
The "dll-symbols" command, specific to native Windows platforms,
gives the impression that the symbols were not loaded, first
because it completes silently, and second because the "info shared"
output does not get updated after the command completes:
(gdb) dll-symbols C:\WINDOWS\syswow64\rpcrt4.dll
(gdb) info shared
From To Syms Read Shared Object Library
[...]
0x77e51000 0x77ee2554 No C:\WINDOWS\system32\rpcrt4.dll
(we exected the "Syms Read" column to read "Yes").
As far as I can tell, the symbols actually do get loaded, but completely
independently from the solib framework, which explains the silent
loading and the fact that the "Syms Read" column does not get updated.
See windows-nat.c::safe_symbol_file_add_stub, which calls symbol_file_add
instead of calling solib_add.
But, aside from the fact that the "Syms Read" status does not get
updated, I also noticed that it does not take into account the DLL's
actual load address when loading its symbols. As a result, I believe
that we get it wrong if the DLL does not get loaded at the prefered
address.
Rather than trying to fix this command, there does not seem to be
a reason other than historical for having Windows-specific commands
which essentially re-implements the "sharedlibrary" command. The
command interface is slightly different (the latter takes a regexp
rather than a plain filename), but it should be just as easy to use
the "sharedlibrary" command, or its "share" alias, as usisng the
"dll-symbols" command. For instance:
(gdb) share rpcrt4.dll
Reading symbols from C:\WINDOWS\system32\rpcrt4.dll...(no debugging symbols found)...done.
Loaded symbols for C:\WINDOWS\system32\rpcrt4.dll
(gdb) info shared
From To Syms Read Shared Object Library
[...]
0x77e51000 0x77ee2554 Yes (*) C:\WINDOWS\system32\rpcrt4.dll
This patch therefore deprecates the "dll-symbols" command, as well
as its two aliases "add-shared-symbol-files" and "assf", with a view
of deleting them as soon as the 7.8 branch gets cut.
gdb/ChangeLog:
* windows-nat.c (_initialize_windows_nat): Deprecate the
"dll-symbols" command. Turn the "add-shared-symbol-files"
and "assf" aliases into commands, and deprecate them as well.
* NEWS: Add entry explaining that "dll-symbols" and its two
aliases are now deprecated.
gdb/doc/ChangeLog:
* gdb.texinfo (Files): Document "add-shared-symbol-files"
and "assf" as being deprecated.
(Cygwin Native): Likewise for "dll-symbols".
(Non-debug DLL Symbols): Remove reference to "dll-symbols"
as a way to force the loading of symbols from a DLL.
This patch fixes the following ARI warning:
gdb/dec-thread.c:695: regression: multi-line string: Multi-line string
must have the newline escaped
I think the new-line was unintentional, so I simply removed it,
and then reformatted the string to fit within our 70-80 max characters-
per-line rule.
gdb/ChangeLog:
* dec-thread.c (dec_thread_get_ada_task_ptid): Avoid unescaped
new-line in debug string. Remove trailing spaces.
* gdbthread.h (add_thread): Change result type to struct thread_info *.
* inferiors.c (add_thread): Change result type to struct thread_info *.
All callers updated.
(add_lwp): Call add_thread here instead of in callers.
All callers updated.
* linux-low.h (get_lwp_thread): Rewrite.
(struct lwp_info): New member "thread".
This speeds up gdbserver attach in non-stop mode because now get_lwp_thread
doesn't do a linear search for the corresponding thread_info object.
* NEWS: Add entry for the new feature
* python/py-value.c (valpy_binop): Call value_x_binop for struct
and class values.
testsuite/
* gdb.python/py-value-cc.cc: Improve test case to enable testing
operations on gdb.Value objects.
* gdb.python/py-value-cc.exp: Add new test to test operations on
gdb.Value objects.
doc/
* python.texi (Values From Inferior): Add description about the
new feature.
* dll.c (clear_dlls): Replace accessing list implemention details
with API function.
* gdbthread.h (get_first_thread): Declare.
* inferiors.c (for_each_inferior_with_data): New function.
(get_first_thread): New function.
(find_thread_ptid): Simplify.
(get_first_inferior): New function.
(clear_list): Delete.
(one_inferior_p): New function.
(clear_inferior_list): New function.
(clear_inferiors): Update.
* inferiors.h (for_each_inferior_with_data): Declare.
(clear_inferior_list): Declare.
(one_inferior_p): Declare.
(get_first_inferior): Declare.
* linux-low.c (linux_wait_for_event): Replace accessing list
implemention details with API function.
* server.c (target_running): Ditto.
(accumulate_file_name_length): New function.
(emit_dll_description): New function.
(handle_qxfer_libraries): Replace accessing list implemention
details with API function.
(handle_qxfer_threads_worker): New function.
(handle_qxfer_threads_proper): Replace accessing list implemention
details with API function.
(handle_query): Ditto.
(visit_actioned_threads_callback_ftype): New typedef.
(visit_actioned_threads_data): New struct.
(visit_actioned_threads): Rewrite to be find_inferior callback.
(resume): Call find_inferior.
(handle_status): Replace accessing list implemention
details with API function.
(process_serial_event): Replace accessing list implemention details
with API function.
* target.c (set_desired_inferior): Replace accessing list implemention
details with API function.
* tracepoint.c (same_process_p): New function.
(gdb_agent_about_to_close): Replace accessing list implemention
details with API function.
* win32-low.c (child_delete_thread): Replace accessing list
implemention details with API function.
(match_dll_by_basename): New function.
(dll_is_loaded_by_basename): New function.
(win32_ensure_ntdll_loaded): Replace accessing list implemention
details call to dll_is_loaded_by_basename.
It's best that we standardize on process_stratum targets using the
ptid.lwp field to store thread ids. The idea being leave the ptid.tid
field free for any thread_stratum target that might want to sit on
top. This patch adds a comment in that direction to struct ptid's
definition.
gdb/
2014-02-19 Pedro Alves <palves@redhat.com>
* common/ptid.h (struct ptid): Mention that process_stratum
targets should prefer ptid.lwp.
From GDB's perspective, independently of how the target really
implements threads, gdb/remote sees all threads as if kernel/system
threads. A rationale along theses lines led to gdbserver storing
thread ids in ptid.lwp in all ports.
Because remote.c is currently using ptid.tid, we can't make gdbserver
and gdb share bits of remote-specific code that manipulates ptids
(e.g., write_ptid/read_ptid).
This patch thus makes remote.c use ptid.lwp instead of ptid.tid.
I believe that on the GDB side too, it's best that we standardize on
process_stratum targets using the ptid.lwp field to store thread ids
anyway. The idea being leave the ptid.tid field free for any
thread_stratum target that might want to sit on top.
Tested on x86_64 Fedora 17, w/ local gdbserver.
gdb/
2014-02-19 Pedro Alves <palves@redhat.com>
* remote.c (remote_thread_alive, write_ptid, read_ptid)
(read_ptid, remote_newthread_step, remote_threads_extra_info)
(remote_get_ada_task_ptid, append_resumption, remote_stop_ns)
(threadalive_test, remote_pid_to_str): Use the ptid.lwp field to
store remote thread ids rather than ptid.tid.
(_initialize_remote): Adjust.
This converts to_get_unwinder and to_get_tailcall_unwinder to methods
and arranges for them to use the new delegation scheme.
This just lets us avoid having a differing style (neither new-style
nor INHERIT) of delegation in the tree.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.c (target_get_unwinder): Rewrite.
(target_get_tailcall_unwinder): Rewrite.
* record-btrace.c (record_btrace_to_get_unwinder): New function.
(record_btrace_to_get_tailcall_unwinder): New function.
(init_record_btrace_ops): Update.
* target.h (struct target_ops) <to_get_unwinder,
to_get_tailcall_unwinder>: Now function pointers. Use
TARGET_DEFAULT_RETURN.
I happened to notice that nto-procfs.c defines
procfs_remove_hw_breakpoint but never uses it. This caused it not to
be updated by my target-method-updating script. This patch fixes the
function and installs it properly. I have no way to test this,
however.
2014-02-19 Tom Tromey <tromey@redhat.com>
* nto-procfs.c (procfs_remove_hw_breakpoint): Add 'self'
argument.
(init_procfs_ops): Correctly set to_remove_hw_breakpoint.
This converts to_decr_pc_after_break to the new style of delegation,
removing forward_target_decr_pc_after_break.
2014-02-19 Tom Tromey <tromey@redhat.com>
* record-btrace.c (record_btrace_decr_pc_after_break): Delegate
directly.
* target-delegates.c: Rebuild.
* target.h (struct target_ops) <to_decr_pc_after_break>: Use
TARGET_DEFAULT_FUNC.
* target.c (default_target_decr_pc_after_break): Rename from
forward_target_decr_pc_after_break. Simplify.
(target_decr_pc_after_break): Rely on delegation.
This removes a few unnecessary calls to INHERIT and de_fault:
* to_doc is only used when a target is registered
* to_magic is only used when a target is pushed and not useful for
current_target.
* to_open and to_close are only ever called using a specific
target_ops object; there is no need to de_fault them.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.c (update_current_target): Do not INHERIT to_doc or
to_magic. Do not de_fault to_open or to_close.
exec_set_find_memory_regions is used to modify the exec target.
However, it only has a single caller, and so it is much clearer to
simply set the appropriate field directly. It's also better for the
coming multi-target world to avoid this kind of global state change
anyway.
2014-02-19 Tom Tromey <tromey@redhat.com>
* gcore.h (objfile_find_memory_regions): Declare.
* gcore.c (objfile_find_memory_regions): No longer static. Add
"self" argument.
(_initialize_gcore): Don't call exec_set_find_memory_regions.
* exec.c: Include gcore.h.
(exec_set_find_memory_regions): Remove.
(exec_find_memory_regions): Remove.
(exec_do_find_memory_regions): Remove.
(init_exec_ops): Update.
* defs.h (exec_set_find_memory_regions): Remove.
This changes instances of TARGET_DEFAULT_RETURN(0) to
TARGET_DEFAULT_RETURN(NULL) when appropriate. The use of "0" was a
relic from an earlier implementation of make-target-delegates; and I
didn't want to go back through the long patch series, fixing up
conflicts, just to change this small detail.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target-delegates.c: Rebuild.
* target.h (struct target_ops) <to_extra_thread_info,
to_thread_name, to_pid_to_exec_file, to_get_section_table,
to_memory_map, to_read_description, to_traceframe_info>: Use NULL,
not 0, in TARGET_DEFAULT_RETURN.
This cleans up target.c to avoid function casts.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.c (complete_target_initialization): Remove casts. Use
return_zero_has_execution.
(return_zero): Add "ignore" argument.
(return_zero_has_execution): New function.
(init_dummy_target): Remove casts. Use
return_zero_has_execution.
During the conversion I kept all the "do not inherit" comments in
update_current_target. However, now they are not needed. This patch
updates the comments for INHERIT and de_fault, and removes the
somewhat odd INHERIT of to_stratum.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.c (update_current_target): Update comments. Do not
INHERIT to_stratum.
This switches to_read_description to the "new normal" delegation
scheme. This one was a bit trickier than the other changes due to the
way that target_read_description handled delegation. I examined all
the target implementations of to_read_description and changed the ones
returning NULL to instead delegate.
2014-02-19 Tom Tromey <tromey@redhat.com>
* arm-linux-nat.c (arm_linux_read_description): Delegate when
needed.
* corelow.c (core_read_description): Delegate when needed.
* remote.c (remote_read_description): Delegate when needed.
* target-delegates.c: Rebuild.
* target.c (target_read_description): Rewrite.
* target.h (struct target_ops) <to_read_description>: Update
comment. Use TARGET_DEFAULT_RETURN.