Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
* ada-operator.inc: Rename the file to ...
* ada-operator.def: ... here, wrap all the entries by macro OP.
* expprint.c (op_name_standard): Remove all the entries. Include
"std-operator.def" instead.
* expression.h (enum exp_opcode): Include "std-operator.def" and
"ada-operator.def". Move all the entries ...
* std-operator.def: ... here, wrap all the entries by macro OP.
for toc pointer on any section having makes_toc_func_call set.
(check_pasted_section): Ensure pasted .init/.fini fragments use
the same toc if any has makes_toc_func_call set.
* python/python.c (execute_gdb_command): Call
prevent_dont_repeat.
* top.c (suppress_dont_repeat): New global.
(dont_repeat): Use it.
(prevent_dont_repeat): New function.
* command.h (prevent_dont_repeat): Declare.
value when reporting the inability to write to the output file.
* config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
frag that has a non-zero fill value.
* gas/all/align.d: Skip for the RX.
* gas/elf/group1a.d: Likewise.
* gas/elf/groupautoa.d: Likewise.
* gas/elf/elf.exp: Do not run section5 test for the RX port.
* gas/elf/section4.d: Likewise.
* gas/elf/section7.d: Likewise.
* gas/macros/semi.s: Fill with a non-zero pattern.
* gas/macros/semi.d: Expect non-zero fill value.
* gas/rx/bcnd.d: Update expected disassembly.
* gas/rx/bra.d: Likewise.
* gas/rx/macros.inc: Add reg1 macro.
* gas/rx/max.sm: Use reg1 macro to avoid generating illegal NOP
instruction.
* gas/rx/mov.sm: Likewise.
* gas/rx/max.d: Update expected disassembly.
* gas/rx/mov.d: Likewise.
* gas/rx/rx-asm-good.s: Use Renesas section names.
* gas/rx/rx-asm-good.d: Update expected disassembly.
This makes several adjustements to the configure python-config.py
scripts to deal with the differences between a Unix install of Python
and a Windows install of Python (as downloaded from the Python website).
Differences:
- The Python executable is directly in the python prefix directory
as opposed to inside the bin/ subdirectory.
- The name of the python library is does not have a dot in the version
number: On Unix, we have libpython2.7, while on Windows, it's
libpython27. So the regexp extracting the python version from
the Python lib filename had to be adjusted slightly.
Also, the tests checking the name of the libpython had to be
adjusted to allow for that.
- There are no link options following the -lpython<version> switch
on Windows, but the regexp extracting the python version was
using it as a delimiter. It had to be removed.
- python-config.py does not work on Windows, mostly because
some sysconfig variables are missing. They are not necessary
so the script was adapted to skip them if not defined.
- The paths returned by python-config.py follow the Windows filename
convention in terms of the directory separator, and this is causing
trouble when the build environment is cygwin (while the compiler
and Python are MinGW). We could have fixed that in the configure
script, but it felt simpler to do so in python-config.py
gdb/ChangeLog:
* configure.ac: Add handling of Python distribution on Windows.
* python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
sysconfig variables are not defined, then do not use them.
On Windows, if LIBPL is not defined, then use prefix + '/libs'
instead. On Windows, return all paths using forward-slashes
rather than backslashes.
This is preparation work for being able to build GDB with Python
support on MinGW.
So far, the "python<version>" subdirectory needs to be specified
when including a Python header file. In order to do that, we have
some special configury that tweaks the include path returned by
python-config.py such that the use of the subdirectory in the include
is necessary. This was done in order to protect ourselves from
possible filename conflicts, since some of the filenames chosen by
Python were a little generic.
The problem is that this cannot work with a standard Python install
on MinGW systems. On such systems, the .h files are located in
<python_prefix>/include. So, in preparation for allowing us to build
GDB on MinGW with Python support enabled, this patch changes the
requirement to provide the "python<version>" subdirectory in the
include directive.
The positive consequence is that we no longer need to have a set
of #include directives for each version of Python, since the include
directive is now the same for all versions of Python. However, the
downside is that we are losing the level of protection we were trying
to achieve by forcing the subdirectory in the include directive.
In order to reduce a bit the consequences of a possible conflict,
this patch also changes the location where the -I/path/to/python
switch goes, to be last in the list (suggested by Doug Evans).
One last change is the fact that we are now including Python.h
and all other Python include headers using angle brackets rather
than double-quotes. This fixes a problem on case-insensitive
systems where #include "Python.h" causes our gdb/python/python.h
header to be included instead of Python's <Python.h> header.
gdb/ChangeLog:
* configure.ac: Remove fallback behavior for building
against Python. Remove tweaking of Python include path.
Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
(AC_TRY_LIBPYTHON): Adjust program used in linking test.
If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
Always restore CPPFLAGS and LIBS after linking test.
* configure: Regenerated.
* Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
(INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
* python/python-internal.h: Adjust includes of Python .h files.
Discovered by Pierre Muller.
gdb/ChangeLog:
* inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
value test.
gdb/testsuite/ChangeLog:
* gdb.base/interact.exp: Add extra tests that verify that
the value of the interactive-mode setting does not change
after the script is sourced.
* tracepoint.c (tfile_xfer_partial): If there's no traceframe
selected, don't try iterating over the traceframe's blocks.
(tfile_has_stack): If there's no traceframe selected, then there's
no stack.
(tfile_has_registers): If there's no traceframe selected, then
there's no registers.
gdb/testsuite/
* gdb.trace/tfile.exp: Test that with no traceframe selected,
there's no stack or registers.
* regcache.c (init_register_cache): Initialize
regcache->register_status.
(free_register_cache): Release regcache->register_status.
(regcache_cpy): Copy register_status.
(registers_to_string): Print 'x's for unavailable registers.
(supply_register): Mark the register's status valid or
unavailable, depending on whether a buffer was passed in or not.
(supply_register_zeroed): New.
(supply_regblock): Mark the registers' status valid or
unavailable, depending on whether a buffer was passed in or not.
* regcache.h (REG_UNAVAILABLE, REG_VALID): New defines.
(struct regcache): New `register_status' field.
(supply_register_zeroed): Declare.
* i387-fp.c (i387_xsave_to_cache): Zero out registers using
supply_register_zeroed, rather than passing a NULL buffer to
supply_register.
* tracepoint.c (fetch_traceframe_registers): Update comment.
* tracepoint.c (tfile_read): New.
(tfile_open): Use it.
(tfile_get_traceframe_address): Use it.
(tfile_trace_find): Use it.
(walk_blocks_callback_func): New typedef.
(match_blocktype): New function.
(traceframe_walk_blocks): New function.
(traceframe_find_block_type): New function.
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value): Use
traceframe_find_block_type and tfile_read.
PR/symtab 11766:
* gdb/objfiles.h (struct objfile) <addr_low>: New field.
* gdb/solib.c (solib_read_symbols): Check for addr_low in
equality test for objfile, initialize addr_low if needed.
