26427 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Tom Tromey
|
85e26832a0 |
Add -Wimplicit-fallthrough
This adds -Wimplicit-fallthrough to the set of default warnings. 2018-05-04 Tom Tromey <tom@tromey.com> * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Add -Wimplicit-fallthrough. gdbserver/ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * configure: Rebuild. |
||
|
Tom Tromey
|
449b1ac7ad |
Add a missing break in record_linux_system_call
This adds a "break" at the end of the RECORD_SYS_RECVFROM case in record_linux_system_call. This seemed correct to me. 2018-05-04 Tom Tromey <tom@tromey.com> * linux-record.c (record_linux_system_call) <case RECORD_SYS_RECVFROM>: Add "break". |
||
|
Tom Tromey
|
15c9ffd697 |
Add missing "breaks"
This adds a "break" to a couple of spots where it was erroneously omitted. I think these are the two (potential) real bugs caught by this series. 2018-05-04 Tom Tromey <tom@tromey.com> * mi/mi-main.c (mi_cmd_trace_frame_collected) <REGISTERS_FORMAT>: Add missing "break". * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals) <NO_FRAME_FILTERS>: Add missing "break". |
||
|
Tom Tromey
|
e3829d13f6 |
Add two fall-through comments in rs6000-tdep.c
This adds two fall-through comments in rs6000-tdep.c. I looked at the PPC instruction manual and convinced myself that this was correct. And, this isn't a semantic change. However, close review would still be good. 2018-05-04 Tom Tromey <tom@tromey.com> * rs6000-tdep.c (ppc_process_record_op4) (ppc_process_record_op63): Add fall-through comment. |
||
|
Tom Tromey
|
da0e15638d |
Add fall-through comment to i386-tdep.c
This adds a fall-through comment in i386-tdep.c. I was not sure what to do here, so I elected to preserve the status quo. In review, John Baldwin pointed out that: "I believe this is correct based on the diff that added the special cases for xgetbv and xsetbv as previously ldgt and lidt were treated the same". gdb/ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * i386-tdep.c (i386_process_record): Add fall-through comment. |
||
|
Tom Tromey
|
0019cd49ca |
Add a fall-through comment to stabsread.c
This adds a fall-through comment to stabsread.c. I skimmed the stabs manual a bit and it seems that 'p' and 'P' are similar enough that this makes sense. Also, stabs is mostly deprecated, and the code has been this way for a long time, so it seemed safest to keep the status quo. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * stabsread.c (define_symbol) <case 'p'>: Add fall-through comment. |
||
|
Tom Tromey
|
565e0edacc |
Fix "obvious" fall-through warnings
This patch fixes the subset of -Wimplicit-fallthrough warnings that I considered obvious. In most cases it was obvious from context that falling through was desired; here I added the appropriate comment. In a couple of cases it seemed clear that a "break" was missing. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * riscv-tdep.c (riscv_isa_xlen): Add fall-through comment. * utils.c (can_dump_core) <LIMIT_CUR>: Add fall-through comment. * eval.c (fetch_subexp_value) <MEMORY_ERROR>: Add fall-through comment. * d-valprint.c (d_val_print) <TYPE_CODE_STRUCT>: Add fall-through comment. * coffread.c (coff_symtab_read) <C_LABEL>: Add fall-through comment. |
||
|
Tom Tromey
|
621846f4e2 |
Add missing ATTRIBUTE_NORETURNs
This patch adds a missing ATTRIBUTE_NORETURN. This lets -Wimplicit-fallthrough recognize that a given case does not fall through. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * dwarf2loc.c (unimplemented): Add ATTRIBUTE_NORETURN. |
||
|
Tom Tromey
|
86a7300762 |
Fix "fall through" comments
This patch updates existing "fall through" comments so that they can be recognized by gcc's -Wimplicit-fallthrough comment-parsing heuristic. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * s390-tdep.c (s390_process_record): Fix fall-through comments. * xcoffread.c (scan_xcoff_symtab): Move comment later. * symfile.c (section_is_mapped): Fix fall-through comment. * stabsread.c (define_symbol, read_member_functions): Fix fall-through comment. * s390-linux-tdep.c (s390_process_record): Fix fall-through comment. * remote.c (remote_wait_as): Fix fall-through comment. * p-exp.y (yylex): Fix fall-through comment. * nat/x86-dregs.c (x86_length_and_rw_bits): Fix fall-through comment. * msp430-tdep.c (msp430_gdbarch_init): Fix fall-through comment. * mdebugread.c (parse_partial_symbols): Fix fall-through comment. * jv-exp.y (yylex): Fix fall-through comment. * go-exp.y (lex_one_token): Fix fall-through comment. * gdbtypes.c (get_discrete_bounds, rank_one_type): Fix fall-through comment. * f-exp.y (yylex): Fix fall-through comment. * dwarf2read.c (process_die): Fix fall-through comments. * dbxread.c (process_one_symbol): Fix fall-through comment. * d-exp.y (lex_one_token): Fix fall-through comment. * cp-name-parser.y (yylex): Fix fall-through comment. * coffread.c (coff_symtab_read): Fix fall-through comment. * c-exp.y (lex_one_token): Fix fall-through comment. * arm-tdep.c (arm_decode_miscellaneous): Fix fall-through comment. * arch/arm.c (arm_instruction_changes_pc): Fix fall-through comment. |
||
|
Tom Tromey
|
56bcdbea2b |
Let gdb.execute handle multi-line commands
This changes the Python API so that gdb.execute can now handle multi-line commands, like "commands" or "define". ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> PR python/22730: * NEWS: Mention gdb.execute change. * gdbcmd.h (execute_control_command): Don't declare. * python/python.c (execute_gdb_command): Use read_command_lines_1, execute_control_commands, execute_control_commands_to_string. * cli/cli-script.h (execute_control_commands) (execute_control_commands_to_string): Declare. (execute_control_command): Add from_tty parameter. * cli/cli-script.c (execute_control_commands) (execute_control_commands_to_string): New functions. (execute_user_command): Use execute_control_commands. (execute_control_command_1): Add "from_tty" parameter. Update. (execute_control_command): Likewise. testsuite/ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> PR python/22730: * gdb.python/python.exp: Test multi-line execute. |
||
|
Tom Tromey
|
a913fffbde |
Allow breakpoint commands to be set from Python
This changes the Python API so that breakpoint commands can be set by writing to the "commands" attribute. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> PR python/22731: * NEWS: Mention that breakpoint commands are writable. * python/py-breakpoint.c (bppy_set_commands): New function. (breakpoint_object_getset) <"commands">: Use it. doc/ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> PR python/22731: * python.texi (Breakpoints In Python): Mention that "commands" is writable. testsuite/ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> PR python/22731: * gdb.python/py-breakpoint.exp: Test setting breakpoint commands. |
||
|
Tom Tromey
|
60b3cef2e4 |
Use function_view in cli-script.c
This changes some functions in cli-script.c to use function_view rather than a function pointer and closure argument. This simplifies the code a bit and is useful in a subsequent patch. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * tracepoint.c (actions_command): Update. * mi/mi-cmd-break.c (mi_command_line_array) (mi_command_line_array_cnt, mi_command_line_array_ptr) (mi_read_next_line): Remove. (mi_cmd_break_commands): Update. * cli/cli-script.h (read_command_lines, read_command_lines_1): Use function_view. * cli/cli-script.c (get_command_line): Update. (process_next_line): Use function_view. Constify. (recurse_read_control_structure, read_command_lines) (read_command_lines_1): Change argument types to function_view. (do_define_command, document_command): Update. * breakpoint.h (check_tracepoint_command): Don't declare. * breakpoint.c (check_tracepoint_command): Remove. (commands_command_1, create_tracepoint_from_upload): Update. |
||
|
Tom Tromey
|
7a2c85f259 |
Allow defining a user command inside a user command
PR gdb/11750 concerns defining a command inside a user commnad, like:
define outer
define inner
echo hi\n
end
end
This patch adds this capability to gdb.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/11750:
* cli/cli-script.h (enum command_control_type) <define_control>:
New constant.
* cli/cli-script.c (multi_line_command_p): Handle define_control.
(build_command_line, execute_control_command_1)
(process_next_line): Likewise.
(do_define_command): New function, extracted from define_command.
(define_command): Use it.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/11750:
* gdb.base/define.exp: Test defining a user command inside a user
command.
* gdb.base/commands.exp (define_if_without_arg_test): Test "define".
|
||
|
Tom Tromey
|
295dc222a7 |
Constify prompt argument to read_command_lines
The prompt argument to read_command_lines can be const. This patch makes this change, and also removes some fixed-sized buffers in favor of using string_printf. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * tracepoint.c (actions_command): Update. * cli/cli-script.h (read_command_lines): Update. * cli/cli-script.c (read_command_lines): Constify prompt_arg. (MAX_TMPBUF): Remove define. (define_command): Use string_printf. (document_command): Likewise. * breakpoint.c (commands_command_1): Update. |
||
|
Tom Tromey
|
1263a9d5f1 |
Make print_command_trace varargs
I noticed some code in execute_control_command_1 that could be simplified by making print_command_trace a printf-like function. This patch makes this change. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * top.c (execute_command): Update. * cli/cli-script.h (print_command_lines): Now varargs. * cli/cli-script.c (print_command_lines): Now varargs. (execute_control_command_1) <case while_control, case if_control>: Update. |
||
|
Tom Tromey
|
12973681f5 |
Use counted_command_line everywhere
Currently command lines are reference counted using shared_ptr only when attached to breakpoints. This patch changes gdb to use shared_ptr in commands as well. This allows for the removal of copy_command_lines. Note that the change to execute_user_command explicitly makes a new reference to the command line. This will be used in a later patch. This simplifies struct command_line based on the observation that a given command can have at most two child bodies: an "if" can have both "then" and "else" parts. Perhaps the names I've chosen for the replacements here are not very good -- your input requested. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * tracepoint.c (all_tracepoint_actions): Rename from all_tracepoint_actions_and_cleanup. Change return type. (actions_command, encode_actions_1, encode_actions) (trace_dump_actions, tdump_command): Update. * remote.c (remote_download_command_source): Update. * python/python.c (gdbpy_eval_from_control_command) (python_command, python_interactive_command): Update. * mi/mi-cmd-break.c (mi_cmd_break_commands): Update. * guile/guile.c (guile_command) (gdbscm_eval_from_control_command, guile_command): Update. * compile/compile.c (compile_code_command) (compile_print_command, compile_to_object): Update. * cli/cli-script.h (struct command_lines_deleter): New. (counted_command_line): New typedef. (struct command_line): Add constructor, destructor. <body_list>: Remove. <body_list_0, body_list_1>: New members. (command_line_up): Remove typedef. (read_command_lines, read_command_lines_1, get_command_line): Update. (copy_command_lines): Don't declare. * cli/cli-script.c (build_command_line): Use "new". (get_command_line): Return counted_command_line. (print_command_lines, execute_user_command) (execute_control_command_1, while_command, if_command): Update. (realloc_body_list): Remove. (process_next_line, recurse_read_control_structure): Update. (read_command_lines, read_command_lines_1): Return counted_command_line. (free_command_lines): Use "delete". (copy_command_lines): Remove. (define_command, document_command, show_user_1): Update. * cli/cli-decode.h (struct cmd_list_element) <user_commands>: Now a counted_command_line. * breakpoint.h (counted_command_line): Remove typedef. (breakpoint_set_commands): Update. * breakpoint.c (check_no_tracepoint_commands) (validate_commands_for_breakpoint): Update. (breakpoint_set_commands): Change commands to be a counted_command_line. (commands_command_1, update_dprintf_command_list) (create_tracepoint_from_upload): Update. |
||
|
Tom Tromey
|
e2fc72e2c5 |
Allocate cmd_list_element with new
This adds a constructor and destructor to cmd_list_element and changes it to be allocated with new. This will be useful in a subsequent patch. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * cli/cli-decode.h (cmd_list_element): New constructor. (~cmd_list_element): New destructor. (struct cmd_list_element): Add initializers. * cli/cli-decode.c (do_add_cmd): Use "new". (delete_cmd): Use "delete". |
||
|
Jan Kratochvil
|
a3b60e4588 |
aarch64: PR 19806: watchpoints: false negatives + PR 20207 contiguous ones
Some unaligned watchpoints were currently missed. On old kernels as specified in kernel RFE: aarch64: ptrace: BAS: Support any contiguous range (edit) https://sourceware.org/bugzilla/show_bug.cgi?id=20207 after this patch some other unaligned watchpoints will get reported as false positives. With new kernels all the watchpoints should work exactly. There may be a regresion that it now less merges watchpoints so that with multiple overlapping watchpoints it may run out of the 4 hardware watchpoint registers. But as discussed in the original thread GDB needs some generic watchpoints merging framework to be used by all the target specific code. Even current FSF GDB code does not merge it perfectly. Also with the more precise watchpoints one can technically merge them less. And I do not think it matters too much to improve mergeability only for old kernels. Still even on new kernels some better merging logic would make sense. There remains one issue: kernel-4.15.14-300.fc27.armv7hl FAIL: gdb.base/watchpoint-unaligned.exp: continue FAIL: gdb.base/watchpoint-unaligned.exp: continue (gdb) continue Continuing. Unexpected error setting watchpoint: Invalid argument. (gdb) FAIL: gdb.base/watchpoint-unaligned.exp: continue But that looks as a kernel bug to me. (1) It is not a regression by this patch. (2) It is unrelated to this patch. gdb/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> PR breakpoints/19806 and support for PR external/20207. * NEWS: Mention Aarch64 watchpoint improvements. * aarch64-linux-nat.c (aarch64_linux_stopped_data_address): Fix missed watchpoints and PR external/20207 watchpoints. * nat/aarch64-linux-hw-point.c (kernel_supports_any_contiguous_range): New. (aarch64_watchpoint_offset): New. (aarch64_watchpoint_length): Support PR external/20207 watchpoints. (aarch64_point_encode_ctrl_reg): New parameter offset, new asserts. (aarch64_point_is_aligned): Support PR external/20207 watchpoints. (aarch64_align_watchpoint): New parameters aligned_offset_p and next_addr_orig_p. Support PR external/20207 watchpoints. (aarch64_downgrade_regs): New. (aarch64_dr_state_insert_one_point): New parameters offset and addr_orig. (aarch64_dr_state_remove_one_point): Likewise. (aarch64_handle_breakpoint): Update caller. (aarch64_handle_aligned_watchpoint): Likewise. (aarch64_handle_unaligned_watchpoint): Support addr_orig and aligned_offset. (aarch64_linux_set_debug_regs): Remove const from state. Call aarch64_downgrade_regs. (aarch64_show_debug_reg_state): Print also dr_addr_orig_wp. * nat/aarch64-linux-hw-point.h (DR_CONTROL_LENGTH): Rename to ... (DR_CONTROL_MASK): ... this. (struct aarch64_debug_reg_state): New field dr_addr_orig_wp. (unsigned int aarch64_watchpoint_offset): New prototype. (aarch64_linux_set_debug_regs): Remove const from state. * utils.c (align_up, align_down): Move to ... * common/common-utils.c (align_up, align_down): ... here. * utils.h (align_up, align_down): Move to ... * common/common-utils.h (align_up, align_down): ... here. gdb/gdbserver/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> * linux-aarch64-low.c (aarch64_stopped_data_address): Likewise. gdb/testsuite/ChangeLog 2018-05-04 Jan Kratochvil <jan.kratochvil@redhat.com> Pedro Alves <palves@redhat.com> PR breakpoints/19806 and support for PR external/20207. * gdb.base/watchpoint-unaligned.c: New file. * gdb.base/watchpoint-unaligned.exp: New file. |
||
|
Joel Brobecker
|
05bc7456b8 |
(SPARC/LEON) fix incorrect array return value printed by "finish"
Consider the code in the gdb.ada/array_return.exp testcase, which
defines a function returning an array of 2 integers:
type Data_Small is array (1 .. 2) of Integer;
function Create_Small return Data_Small;
When doing a "finish" from inside function Create_Small, we expect
GDB to tell us that the return value was "(1, 1)". However, it currently
prints the wrong value:
(gdb) finish
Run till exit from #0 pck.create_small () at /[...]/pck.adb:5
p () at /[...]/p.adb:10
10 Large := Create_Large;
Value returned is $1 = (0, 0)
This is a regression which I traced back to the following commit...
| commit 1933fd8ee01ad2e74a9c6341bc40f54962a8f889
| Date: Fri May 19 03:06:19 2017 -0700
| Subject: gdb: fix TYPE_CODE_ARRAY handling in sparc targets
... which, despite what the subject says, is not really about
TYPE_CODE_ARRAY handling, which is a bit of an implementation detail,
but about the GNU vectors extension.
The author of the patch equated TYPE_CODE_ARRAY with vectors, which
is not correct. Vectors are TYPE_CODE_ARRAY types with the TYPE_VECTOR
flag set. So at the very minimum, the patch should have been checking
for both TYPE_CODE_ARRAY and TYPE_VECTOR.
But, that's not the only thing that did not seem right to me. When
looking at the ABI, and at the summary of the implementation in GCC
of the calling conventions for that architecture:
size argument return value
small integer <4 int. reg. int. reg.
word 4 int. reg. int. reg.
double word 8 int. reg. int. reg.
_Complex small integer <8 int. reg. int. reg.
_Complex word 8 int. reg. int. reg.
_Complex double word 16 memory int. reg.
vector integer <=8 int. reg. FP reg.
vector integer >8 memory memory
float 4 int. reg. FP reg.
double 8 int. reg. FP reg.
long double 16 memory memory
_Complex float 8 memory FP reg.
_Complex double 16 memory FP reg.
_Complex long double 32 memory FP reg.
vector float any memory memory
aggregate any memory memory
The nice thing about the patch above is that it nicely factorized
the code that determines how arguments are passed/returns. The bad
news is that the implementation, particularly for the handling of
arrays and vectors, doesn't seem to match the summary above. Hence,
the regression we observed.
So what I did was review and re-implement some of the predicate functions
according to the summary above. Because dejagnu crashes all our Solaris
machines real bad, I can't run the dejagnu testsuite there. So what I did
was test the patch with AdaCore's testsuite against leon3-elf, no
regression. I verified that this fixes the regression above while
at the same time still passing gdb.base/gnu_vector.exp (I transposed
that testcase to our testsuite), which is the testcase that was cited
in the commit above as seeing some FAIL->PASS improvements.
This patch also removes one assertion...
gdb_assert (sparc_integral_or_pointer_p (type)
|| (TYPE_CODE (type) == TYPE_CODE_ARRAY && len <= 8));
... because that assertion is really the "negative" of the other conditions
written in the same "if, else if, else [assert]" block in this function.
To me, this assertion forces us to maintain two versions of the same code,
and is an unnecessary burden. In particular, the above is not the
correct condition, and the ABI summary table above shows that we need
a more complex condition to describe the situations where we expect
arguments to be passed by register.
gdb/ChangeLog:
* sparc-tdep.c (sparc_structure_return_p): Re-implement to
match the ABI as summarized in GCC's gcc/config/sparc/sparc.c.
(sparc_arg_by_memory_p): Renamed from sparc_arg_on_registers_p.
Re-implement to match the ABI as summarized in GCC's
gcc/config/sparc/sparc.c. All callers updated.
(sparc32_store_arguments): Remove assertion.
|
||
|
Tom Tromey
|
2f433492bd |
Minor cleanups in printcmd.c
This changes decode_format to use skip_spaces, and changes printcmd.c not to include tui.h, which apparently is not needed. 2018-05-04 Tom Tromey <tom@tromey.com> * printcmd.c: Don't include tui.h. (decode_format): Use skip_spaces. |
||
|
Tom Tromey
|
9be2ae8fc6 |
Use previous count when 'x' command is repeated
About the 'x' command, the manual says:
If you use <RET> to repeat the 'x' command, the repeat count N is
used again; the other arguments default as for successive uses of
'x'.
However, PR gdb/22619 points out that this does not work.
This patch fixes the problem.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/22619:
* printcmd.c (last_count): New global.
(x_command): Use saved count when repeating.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR gdb/22619:
* gdb.base/long_long.exp (gdb_test_long_long): Add test for repeat
behavior.
|
||
|
Tom Tromey
|
f0b3976bdc |
Remove do_closedir_cleanup
This removes both copies of do_closedir_cleanup in favor of a new unique_ptr specialization. Tested by the buildbot, though I'm not sure that these code paths are exercised there. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * nto-procfs.c (do_closedir_cleanup): Remove. (procfs_pidlist): Use gdb_dir_up. * procfs.c (do_closedir_cleanup): Remove. (proc_update_threads): Use gdb_dir_up. * common/filestuff.h (struct gdb_dir_deleter): New. (gdb_dir_up): New typedef. |
||
|
Tom Tromey
|
862d101ada |
Remove cleanup from print_mention_exception
This removes a cleanup from print_mention_exception by using string_printf. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * ada-lang.c (print_mention_exception): Use std::string. |
||
|
Tom Tromey
|
cb7de75eb3 |
Return std::string from ada_exception_catchpoint_cond_string
This changes ada_exception_catchpoint_cond_string to return a std::string, allowing for the removal of a cleanup in create_excep_cond_exprs. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * ada-lang.c (create_excep_cond_exprs): Update. (ada_exception_catchpoint_cond_string): Use std::string. |
||
|
Tom Tromey
|
49d83361cd |
Remove cleanup from old_renaming_is_invisible
This removes a cleanup from ada-lang.c by changing xget_renaming_scope to return a std::string. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * ada-lang.c (xget_renaming_scope): Return std::string. (old_renaming_is_invisible): Update. |
||
|
Tom Tromey
|
ade72a3453 |
Use gdb_bfd_ref_ptr in target_bfd
I noticed that target_bfd was using manual reference counting for the BFD it held. This patch changes it to use gdb_bfd_ref_ptr instead. Tested by the buildbot. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * bfd-target.c (target_bfd::m_bfd): Now a gdb_bfd_ref_ptr. (target_bfd::target_bfd, target_bfd::~target_bfd): Update. |
||
|
Ulrich Weigand
|
2be4d7f0e0 |
[spu] Fix build break
gdb/ChangeLog: 2018-05-04 Ulrich Weigand <uweigand@de.ibm.com> * spu-linux-nat.c (spu_linux_nat_target::wait): Fix syntax error. |
||
|
Tom Tromey
|
69b6ecb049 |
Remove a cleanup from remote.c
This removes a cleanup from remote.c by using std::string to construct the qSupported packet. Tested by the buildbot. ChangeLog 2018-05-04 Tom Tromey <tom@tromey.com> * remote.c (remote_query_supported_append): Change type. (remote_check_symbols): Update. |
||
|
Paul Pluzhnikov
|
bf27f0e2c7 |
configure uses incorrect link order when testing libpython
References: https://stackoverflow.com/a/49868387 https://sourceware.org/bugzilla/show_bug.cgi?id=11420 Configure uses "gcc -o conftest -g ... conftest.c -ldl -lncurses -lm -ldl ... -lpthread ... -lpython2.7" when deciding whether give libpython is usable. That of course is the wrong link order, and only works for shared libraries (mostly by accident), and only on some systems. gdb/ChangeLog: PR gdb/11420 * configure.ac: Prepend libpython. * python/python-config.py: Likewise. * configure: Regenerate. |
||
|
Simon Marchi
|
4ea17de8f1 |
Use flex's -t option instead of --stdout
As reported in https://sourceware.org/ml/gdb-patches/2018-05/msg00042.html some old versions of flex (2.5.4) don't support the --stdout switch. Use -t, which is an alias. gdb/ChangeLog: * Makefile.in (%.c: %.l): Use -t instead of --stdout. |
||
|
Pedro Alves
|
bd732259bd |
Fix s390 GNU/Linux build
- Fixes this compile error:
../../src/gdb/s390-linux-nat.c:125:8: error: ‘virtual bool s390_linux_nat_target::have_continuable_watchpoint()’ can be marked override [-Werror=suggest-override]
bool have_continuable_watchpoint () { return 1; }
^~~~~~~~~~~~~~~~~~~~~~~~~~~
s390 never implemented that hook. The declaration of the method got
there simply via copy/paste from some other target.
Return 'true' instead of '1' while at it.
- Fixes this link error:
s390-linux-nat.o:(.rodata._ZTV21s390_linux_nat_target[_ZTV21s390_linux_nat_target]+0x120): undefined reference to `s390_linux_nat_target::watchpoint_addr_within_range(unsigned long, unsigned long, int)'
gdb/ChangeLog:
2018-05-03 Pedro Alves <palves@redhat.com>
* s390-linux-nat.c
(s390_linux_nat_target::have_continuable_watchpoint): Mark with
override. Write 'true' instead of '1'.
(s390_linux_nat_target::watchpoint_addr_within_range): Remove
declaration.
|
||
|
Pedro Alves
|
d9f719f1ad |
target factories, target open and multiple instances of targets
Currently, to open a target, with "target TARGET_NAME", GDB finds the target_ops instance with "TARGET_NAME" as short name, and then calls its target_ops::open virtual method. In reality, there's no actual target/name lookup, a pointer to the target_ops object was associated with the "target TARGET_NAME" command at add_target time (when GDB is initialized), as the command's context. This creates a chicken and egg situation. Consider the case of wanting to open multiple remote connections. We want to be able to have one remote target_ops instance per connection, but, if we're not connected yet, so we don't yet have an instance to call target->open() on... This patch fixes this by separating out common info about a target_ops to a separate structure (shortname, longname, doc), and changing the add_target routine to take a reference to such an object instead of a pointer to a target_ops, and a pointer to a factory function that is responsible to open an instance of the corresponding target when the user types "target TARGET_NAME". -extern void add_target (struct target_ops *); +extern void add_target (const target_info &info, target_open_ftype *func); I.e. this factory function replaces the target_ops::open virtual method. For static/singleton targets, nothing changes, the target_open_ftype function pushes the global target_ops instance on the target stack. At target_close time, the connection is tor down, but the global target_ops object remains live. However, targets that support being open multiple times will make their target_open_ftype routine allocate a new target_ops instance on the heap [e.g., new remote_target()], and push that on the stack. At target_close time, the new object is destroyed (by the target_ops::close virtual method). Both the core target and the remote targets will support being open multiple times (others could/should too, but those were my stopping point), but not in this patch yet. We need to get rid of more globals first before that'd be useful. Native targets are somewhat special, given find_default_run_target & friends. Those routines also expect to return a target_ops pointer, even before we've open the target. However, we'll never need more than one instance of the native target, so we can assume/require that native targets are global/simpletons, and have the backends register a pointer to the native target_ops. Since all native targets inherit inf_child_target, we can centralize that registration. See add_inf_child_target, get_native_target/set_native_target and find_default_run_target. gdb/ChangeLog: 2018-05-02 Pedro Alves <palves@redhat.com> * aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Use add_inf_child_target. * aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Use add_inf_child_target. * aix-thread.c (aix_thread_target_info): New. (aix_thread_target) <shortname, longname, doc>: Delete. <info>: New. * alpha-bsd-nat.c (_initialize_alphabsd_nat): Use add_inf_child_target. * alpha-linux-nat.c (_initialize_alpha_linux_nat): Use add_inf_child_target. * amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Use add_inf_child_target. * amd64-linux-nat.c (_initialize_amd64_linux_nat): Use add_inf_child_target. * amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Use add_inf_child_target. * amd64-obsd-nat.c (_initialize_amd64obsd_nat): Use add_inf_child_target. * arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Use add_inf_child_target. * arm-linux-nat.c (_initialize_arm_linux_nat): Use add_inf_child_target. * arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Use add_inf_child_target. * bfd-target.c (target_bfd_target_info): New. (target_bfd) <shortname, longname, doc>: Delete. <info>: New. * bsd-kvm.c (bsd_kvm_target_info): New. (bsd_kvm_target) <shortname, longname, doc>: Delete. <info>: New. (bsd_kvm_target::open): Rename to ... (bsd_kvm_target_open): ... this. Adjust. * bsd-uthread.c (bsd_uthread_target_info): New. (bsd_uthread_target) <shortname, longname, doc>: Delete. <info>: New. * corefile.c (core_file_command): Adjust. * corelow.c (core_target_info): New. (core_target) <shortname, longname, doc>: Delete. <info>: New. (core_target::open): Rename to ... (core_target_open): ... this. Adjust. * ctf.c (ctf_target_info): New. (ctf_target) <shortname, longname, doc>: Delete. <info>: New. (ctf_target::open): Rename to ... (ctf_target_open): ... this. (_initialize_ctf): Adjust. * exec.c (exec_target_info): New. (exec_target) <shortname, longname, doc>: Delete. <info>: New. (exec_target::open): Rename to ... (exec_target_open): ... this. * gdbcore.h (core_target_open): Declare. * go32-nat.c (_initialize_go32_nat): Use add_inf_child_target. * hppa-linux-nat.c (_initialize_hppa_linux_nat): Use add_inf_child_target. * hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Use add_inf_child_target. * hppa-obsd-nat.c (_initialize_hppaobsd_nat): Use add_inf_child_target. * i386-darwin-nat.c (_initialize_i386_darwin_nat): Use add_inf_child_target. * i386-fbsd-nat.c (_initialize_i386fbsd_nat): Use add_inf_child_target. * i386-gnu-nat.c (_initialize_i386gnu_nat): Use add_inf_child_target. * i386-linux-nat.c (_initialize_i386_linux_nat): Use add_inf_child_target. * i386-nbsd-nat.c (_initialize_i386nbsd_nat): Use add_inf_child_target. * i386-obsd-nat.c (_initialize_i386obsd_nat): Use add_inf_child_target. * ia64-linux-nat.c (_initialize_ia64_linux_nat): Use add_inf_child_target. * inf-child.c (inf_child_target_info): New. (inf_child_target::info): New. (inf_child_open_target): Remove 'target' parameter. Use get_native_target instead. (inf_child_target::open): Delete. (add_inf_child_target): New. * inf-child.h (inf_child_target) <shortname, longname, doc, open>: Delete. <info>: New. (add_inf_child_target): Declare. (inf_child_open_target): Declare. * linux-thread-db.c (thread_db_target_info): New. (thread_db_target) <shortname, longname, doc>: Delete. <info>: New. * m32r-linux-nat.c (_initialize_m32r_linux_nat): Use add_inf_child_target. * m68k-bsd-nat.c (_initialize_m68kbsd_nat): Use add_inf_child_target. * m68k-linux-nat.c (_initialize_m68k_linux_nat): Use add_inf_child_target. * m88k-bsd-nat.c (_initialize_m88kbsd_nat): Use add_inf_child_target. * make-target-delegates (print_class): Adjust. * mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Use add_inf_child_target. * mips-linux-nat.c (_initialize_mips_linux_nat): Use add_inf_child_target. * mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Use add_inf_child_target. * mips64-obsd-nat.c (_initialize_mips64obsd_nat): Use add_inf_child_target. * nto-procfs.c (nto_native_target_info): New. (nto_procfs_target_native) <shortname, longname, doc>: Delete. <info>: New. (nto_procfs_target_info): New. (nto_procfs_target_procfs) <shortname, longname, doc>: Delete. <info>: New. (init_procfs_targets): Adjust. * ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Use add_inf_child_target. * ppc-linux-nat.c (_initialize_ppc_linux_nat): Use add_inf_child_target. * ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Use add_inf_child_target. * ppc-obsd-nat.c (_initialize_ppcobsd_nat): Use add_inf_child_target. * ravenscar-thread.c (ravenscar_target_info): New. (ravenscar_thread_target) <shortname, longname, doc>: Delete. <info>: New. * record-btrace.c (record_btrace_target_info): (record_btrace_target) <shortname, longname, doc>: Delete. <info>: New. (record_btrace_target::open): Rename to ... (record_btrace_target_open): ... this. Adjust. * record-full.c (record_longname, record_doc): New. (record_full_base_target) <shortname, longname, doc>: Delete. <info>: New. (record_full_target_info): New. (record_full_target): <shortname>: Delete. <info>: New. (record_full_core_open_1, record_full_open_1): Update comments. (record_full_base_target::open): Rename to ... (record_full_open): ... this. (cmd_record_full_restore): Update. (_initialize_record_full): Update. * remote-sim.c (remote_sim_target_info): New. (gdbsim_target) <shortname, longname, doc>: Delete. <info>: New. (gdbsim_target::open): Rename to ... (gdbsim_target_open): ... this. (_initialize_remote_sim): Adjust. * remote.c (remote_doc): New. (remote_target_info): New. (remote_target) <shortname, longname, doc>: Delete. <info>: New. (extended_remote_target_info): New. (extended_remote_target) <shortname, longname, doc>: Delete. <info>: New. (remote_target::open_1): Make static. Adjust. * rs6000-nat.c (_initialize_rs6000_nat): Use add_inf_child_target. * s390-linux-nat.c (_initialize_s390_nat): Use add_inf_child_target. * sh-nbsd-nat.c (_initialize_shnbsd_nat): Use add_inf_child_target. * sol-thread.c (thread_db_target_info): New. (sol_thread_target) <shortname, longname, doc>: Delete. <info>: New. * sparc-linux-nat.c (_initialize_sparc_linux_nat): Use add_inf_child_target. * sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Use add_inf_child_target. * sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Use add_inf_child_target. * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Use add_inf_child_target. * sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Use add_inf_child_target. * sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Use add_inf_child_target. * spu-linux-nat.c (_initialize_spu_nat): Use add_inf_child_target. * spu-multiarch.c (spu_multiarch_target_info): New. (spu_multiarch_target) <shortname, longname, doc>: Delete. <info>: New. * target-delegates.c: Regenerate. * target.c: Include <unordered_map>. (target_ops_p): Delete. (DEF_VEC_P(target_ops_p)): Delete. (target_factories): New. (test_target_info): New. (test_target_ops::info): New. (open_target): Adjust to use target_factories. (add_target_with_completer): Rename to ... (add_target): ... this. Change prototype. Register target_info and open callback in target_factories. Register target_info in command context instead of target_ops. (add_target): Delete old implementation. (add_deprecated_target_alias): Change prototype. Adjust. (the_native_target): New. (set_native_target, get_native_target): New. (find_default_run_target): Use the_native_target. (find_attach_target, find_run_target): Simplify. (target_ops::open): Delete. (dummy_target_info): New. (dummy_target::shortname, dummy_target::longname) (dummy_target::doc): Delete. (dummy_target::info): New. (debug_target::shortname, debug_target::longname) (debug_target::doc): Delete. (debug_target::info): New. * target.h (struct target_info): New. (target_ops::~target_ops): Add comment. (target_ops::info): New. (target_ops::shortname, target_ops::longname, target_ops::doc): No longer virtual. Implement in terms of target_info. (set_native_target, get_native_target): Declare. (target_open_ftype): New. (add_target, add_target_with_completer) (add_deprecated_target_alias): Change prototype. (test_target) <shortname, longname, doc>: Delete. <info>: New. * tilegx-linux-nat.c (_initialize_tile_linux_nat): Use add_inf_child_target. * tracefile-tfile.c (tfile_target_info): New. (tfile_target) <shortname, longname, doc>: Delete. <info>: New. (tfile_target::open): Rename to ... (tfile_target_open): ... this. (_initialize_tracefile_tfile): Adjust. * vax-bsd-nat.c (_initialize_vaxbsd_nat): Use add_inf_child_target. * windows-nat.c (_initialize_windows_nat): Use add_inf_child_target. * xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Use add_inf_child_target. |
||
|
Pedro Alves
|
135340afdf |
linux_nat_target: More low methods
This converts the remaining linux-nat.c hooks low_ methods like had been started in a previous patch. The linux_nat_set_foo routines are all gone with this. gdb/ChangeLog: 2018-05-02 Pedro Alves <palves@redhat.com> * linux-nat.h (linux_nat_target) <low_new_thread, low_delete_thread, low_new_fork, low_forget_process, low_prepare_to_resume, low_siginfo_fixup, low_status_is_event>: New virtual methods. (linux_nat_set_new_thread, linux_nat_set_delete_thread) (linux_nat_new_fork_ftype, linux_nat_set_new_fork) (linux_nat_forget_process_ftype, linux_nat_set_forget_process) (linux_nat_forget_process, linux_nat_set_siginfo_fixup) (linux_nat_set_prepare_to_resume, linux_nat_set_status_is_event): Delete. * linux-fork.c (delete_fork): Adjust to call low method. * linux-nat.c (linux_nat_new_thread, linux_nat_delete_thread) (linux_nat_new_fork, linux_nat_forget_process_hook) (linux_nat_prepare_to_resume, linux_nat_siginfo_fixup) (linux_nat_status_is_event): (linux_nat_target::follow_fork, lwp_free, add_lwp, detach_one_lwp) (linux_resume_one_lwp_throw, linux_handle_extended_wait): Adjust to call low method. (sigtrap_is_event): Rename to ... (linux_nat_target::low_status_is_event): ... this. (linux_nat_set_status_is_event): Delete. (save_stop_reason, linux_nat_wait_1) (linux_nat_target::mourn_inferior, siginfo_fixup): Adjust to call low methods. (linux_nat_set_new_thread, linux_nat_set_delete_thread) (linux_nat_set_new_fork, linux_nat_set_forget_process) (linux_nat_forget_process, linux_nat_set_siginfo_fixup) (linux_nat_set_prepare_to_resume): Delete. * aarch64-linux-nat.c: All linux_nat_set_* callbacks converted to low virtual methods. * amd64-linux-nat.c: Likewise. * arm-linux-nat.c: Likewise. * i386-linux-nat.c: Likewise. * ia64-linux-nat.c: Likewise. * mips-linux-nat.c: Likewise. * ppc-linux-nat.c: Likewise. * s390-linux-nat.c: Likewise. * sparc64-linux-nat.c: Likewise. * x86-linux-nat.c: Likewise. * x86-linux-nat.h: Include "nat/x86-linux.h". (x86_linux_nat_target) <low_new_fork, low_forget_process, low_prepare_to_resume, low_new_thread, low_delete_thread>: Override methods. |
||
|
Pedro Alves
|
57810aa7e8 |
target_ops: Use bool throughout
After the previous target_ops/C++ patches are all squashed and merged, this one can go in separately. This patch adjusts all the target methods to return bool instead of int when they're returning a boolean. gdb/ChangeLog: 2018-05-02 Pedro Alves <palves@redhat.com> * target.h (target_ops) <stopped_by_sw_breakpoint, supports_stopped_by_sw_breakpoint, stopped_by_hw_breakpoint, supports_stopped_by_hw_breakpoint, stopped_by_watchpoint, have_continuable_watchpoint, stopped_data_address, watchpoint_addr_within_range, can_accel_watchpoint_condition, can_run, thread_alive, has_all_memory, has_memory, has_stack, has_registers, has_execution, can_async_p, is_async_p, supports_non_stop, always_non_stop_p, can_execute_reverse, supports_multi_process, supports_enable_disable_tracepoint, supports_disable_randomization, supports_string_tracing, supports_evaluation_of_breakpoint_conditions, can_run_breakpoint_commands, filesystem_is_local, can_download_tracepoint, get_trace_state_variable_value, set_trace_notes, get_tib_address, use_agent, can_use_agent, record_is_replaying, record_will_replay, augmented_libraries_svr4_read>: Adjust to return bool. * aarch64-linux-nat.c: All implementations adjusted. * aix-thread.c: All implementations adjusted. * arm-linux-nat.c: All implementations adjusted. * breakpoint.c: All implementations adjusted. * bsd-kvm.c: All implementations adjusted. * bsd-uthread.c: All implementations adjusted. * corelow.c: All implementations adjusted. * ctf.c: All implementations adjusted. * darwin-nat.c: All implementations adjusted. * darwin-nat.h: All implementations adjusted. * exec.c: All implementations adjusted. * fbsd-nat.c: All implementations adjusted. * fbsd-nat.h: All implementations adjusted. * gnu-nat.c: All implementations adjusted. * gnu-nat.h: All implementations adjusted. * go32-nat.c: All implementations adjusted. * ia64-linux-nat.c: All implementations adjusted. * inf-child.c: All implementations adjusted. * inf-child.h: All implementations adjusted. * inf-ptrace.c: All implementations adjusted. * inf-ptrace.h: All implementations adjusted. * linux-nat.c: All implementations adjusted. * linux-nat.h: All implementations adjusted. * mips-linux-nat.c: All implementations adjusted. * nto-procfs.c: All implementations adjusted. * ppc-linux-nat.c: All implementations adjusted. * procfs.c: All implementations adjusted. * ravenscar-thread.c: All implementations adjusted. * record-btrace.c: All implementations adjusted. * record-full.c: All implementations adjusted. * remote-sim.c: All implementations adjusted. * remote.c: All implementations adjusted. * s390-linux-nat.c: All implementations adjusted. * sol-thread.c: All implementations adjusted. * spu-multiarch.c: All implementations adjusted. * target-delegates.c: All implementations adjusted. * target.c: All implementations adjusted. * target.h: All implementations adjusted. * tracefile-tfile.c: All implementations adjusted. * tracefile.c: All implementations adjusted. * tracefile.h: All implementations adjusted. * windows-nat.c: All implementations adjusted. * x86-linux-nat.h: All implementations adjusted. * x86-nat.h: All implementations adjusted. |
||
|
Pedro Alves
|
ad6a4e2dd6 |
make-target-delegates: line break between return type and function name
Before the target_ops C++ification, this wasn't necessary simply because the methods were wrapped in ()'s, like '(*to_my_long_method_name) (target_ops *)', so std::vector<long_type_name>(*to_my_long_method_name) ()TARGET_DEFAULT_IGNORE () still parsed correctly. With the (*) gone, we need this. gdb/ChangeLog: 2018-05-02 Pedro Alves <palves@redhat.com> * make-target-delegates (scan_target_h): Don't trim lines here. Replace sequences of tabs and/or whitespace with a single whitespace. (top level, parsing methods): Trim each line before processing it here. |
||
|
Pedro Alves
|
f6ac5f3d63 |
Convert struct target_ops to C++
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
|
||
|
Pedro Alves
|
3fffc0701a |
Eliminate target_ops::to_xclose
In the multi-target branch, I found no need for the target_close vs target_xclose distinction. Heap-allocated targets simply delete themselves in their target_close implementation, while singleton/static targets don't. The target_ops C++ification patches will add more commentary around target_ops's destructor, but there's no destructor yet... gdb/ChangeLog: 2018-05-02 Pedro Alves <palves@redhat.com> * bfd-target.c (target_bfd_xclose): Rename to ... (target_bfd_close): ... this. (target_bfd_reopen): Adjust. * target.c (target_close): Remove references to to_xclose. * target.h (target_ops::to_xclose): Delete. (target_ops::to_close): Update comments. |
||
|
Pedro Alves
|
6798487f5b |
Make inf_ptrace_trad Linux-only, move to separate file
There are only two inf_ptrace_trad_target users, MIPS GNU/Linux and Alpha GNU/Linux. They both call it via linux_trad_target. Move this code out of inf-ptrace.c to a GNU/Linux-specific new file. Making this code be GNU/Linux-specific simplifies C++ification of target_ops, because we can make the trad target inherit linux_nat instead of inheriting inf_ptrace. That'll be visible in a later patch. Note this makes linux_target_install_ops an extern function, but that is temporary -- the function will disappear once target_ops is made a C++ class with virtual methods, later in the series. Also, I did not rename the functions in the new file for a similar reason. They'll be renamed again anyway in a couple of patches. gdb/ChangeLog: 2018-05-02 Pedro Alves <palves@redhat.com> * alpha-linux-nat.c: Include "linux-nat-trad.h" instead of "linux-nat.h". * configure.nat (alpha-linux, linux-mips): Add linux-nat-trad.o. * inf-ptrace.c (inf_ptrace_register_u_offset) (inf_ptrace_fetch_register, inf_ptrace_fetch_registers) (inf_ptrace_store_register, inf_ptrace_store_registers) (inf_ptrace_trad_target): Move to ... * linux-nat-trad.c: ... this new file. * linux-nat-trad.h: New file. * linux-nat.c (linux_target_install_ops): Make extern. (linux_trad_target): Delete. * linux-nat.h (linux_trad_target): Delete declaration. (linux_target_install_ops): Declare. * mips-linux-nat.c: Include "linux-nat-trad.h" instead of "linux-nat.h". |
||
|
Pedro Alves
|
c1955e1792 |
More procfs.c simplification
There are only two architectures using procfs.c (i386/SPARC), and none of their corresponding nat files overrides any target method. Move the add_target calls to procfs.c directly. gdb/ChangeLog: 2018-05-02 Pedro Alves <palves@redhat.com> * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Don't call procfs_target/add_target here. * procfs.c (procfs_target): Make static. (_initialize_procfs): Call add_target here. * procfs.h (struct target_ops): Remove forward declaration. (procfs_target): Remove declaration. * sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Delete. |
||
|
Pedro Alves
|
b5c8fcb1b4 |
Eliminate procfs.c:procfs_use_watchpoints
Now that procfs.c is only ever used by Solaris, and, both x86 and SPARC Solaris support watchpoints (*), we don't need the separate procfs_use_watchpoints function. Getting rid of it simplifies C++ification of target_ops. (*) and I assume that any other Solaris port would use the same kernel debug API interfaces for watchpoints. Otherwise, we can worry about it if it ever happens. gdb/ChangeLog: 2018-05-02 Pedro Alves <palves@redhat.com> * procfs.c (procfs_stopped_by_watchpoint) (procfs_insert_watchpoint, procfs_remove_watchpoint) (procfs_region_ok_for_hw_watchpoint, procfs_stopped_data_address): Forward declare. (procfs_use_watchpoints): Delete, move contents... (procfs_target): ... here. * procfs.h (procfs_use_watchpoints): Delete declaration. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Don't call procfs_use_watchpoints. * sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Don't call procfs_use_watchpoints. |
||
|
Tom Tromey
|
0489430a0e |
Handle var_zuinteger and var_zuinteger_unlimited from Python
PR python/20084 points out that the Python API doesn't handle the var_zuinteger and var_zuinteger_unlimited parameter types. This patch adds support for these types. Regression tested on x86-64 Fedora 26. ChangeLog 2018-05-02 Tom Tromey <tom@tromey.com> PR python/20084: * python/python.c (gdbpy_parameter_value): Handle var_zuinteger and var_zuinteger_unlimited. * python/py-param.c (struct parm_constant): Add PARAM_ZUINTEGER and PARAM_ZUINTEGER_UNLIMITED. (set_parameter_value): Handle var_zuinteger and var_zuinteger_unlimited. (add_setshow_generic): Likewise. (parmpy_init): Likewise. doc/ChangeLog 2018-05-02 Tom Tromey <tom@tromey.com> PR python/20084: * python.texi (Parameters In Python): Document PARAM_ZUINTEGER and PARAM_ZUINTEGER_UNLIMITED. testsuite/ChangeLog 2018-05-02 Tom Tromey <tom@tromey.com> PR python/20084: * gdb.python/py-parameter.exp: Add PARAM_ZUINTEGER and PARAM_ZUINTEGER_UNLIMITED tests. |
||
|
Dan Robertson
|
1632f8baf0 |
rust: Fix null deref when casting (PR 23124)
Fix a null dereference when casting a value to a unit type. ChangeLog 2018-04-28 Dan Robertson <danlrobertson89@gmail.com> PR rust/23124 * gdb/rust-exp.y (convert_params_to_types): Ensure that the params pointer is not null before dereferencing it. testsuite/ChangeLog 2018-04-28 Dan Robertson <danlrobertson89@gmail.com> PR rust/23124 * gdb.rust/expr.exp: Test that the unit type is correctly parsed when casting. |
||
|
Tom Tromey
|
7676193654 |
Remove a use of is_mi_like_p from darwin-nat-info.c
This removes a use of is_mi_like_p from darwin-nat-info.c. This is not needed because MI already ignores ui_out::text. ChangeLog 2018-04-30 Tom Tromey <tom@tromey.com> * darwin-nat-info.c (darwin_debug_regions_recurse): Remove use of is_mi_like_p. |
||
|
Tom Tromey
|
2d33446d4d |
Remove some is_mi_like_p from breakpoint code
This removes some uses of is_mi_like_p from the breakpoint code. The break-catch-throw.c change brings it into line with what other breakpoint classes do. The other changes simply replace printf calls with ui_out::text or ui_out::message calls. ChangeLog 2018-04-30 Tom Tromey <tom@tromey.com> * breakpoint.c (mention): Remove use of is_mi_like_p. (print_mention_ranged_breakpoint): Likewise. * break-catch-throw.c (print_it_exception_catchpoint): Remove use of is_mi_like_p. |
||
|
Tom Tromey
|
f3c6ababac |
Remove a use of is_mi_like_p from tracepoint.c
This removes a use of is_mi_like_p and changes a printf_filtered into a call to ui_out::text. ChangeLog 2018-04-30 Tom Tromey <tom@tromey.com> * tracepoint.c (tvariables_info_1): Remove use of is_mi_like_p. |
||
|
Tom Tromey
|
40c03530b1 |
Remove some uses of is_mi_like_p from spu-tdep.c
There were a few spots in spu-tdep.c where a use of is_mi_like_p was not needed. ChangeLog 2018-04-30 Tom Tromey <tom@tromey.com> * spu-tdep.c (info_spu_mailbox_list, info_spu_dma_cmdlist) (info_spu_event_command): Remove some uses of is_mi_like_p. |
||
|
Tom Tromey
|
2038b7fdf3 |
Remove some uses of is_mi_like_p from py-framefilter.c
Some uses of is_mi_like_p in py-framefilter.c were not needed. In general a call to ui_out::text, ui_out::message, or ui_out::spaces does not need to be guarded -- these are already ignored by MI. ChangeLog 2018-04-30 Tom Tromey <tom@tromey.com> * python/py-framefilter.c (py_print_single_arg) (enumerate_locals, py_print_args, py_print_frame): Remove some uses of is_mi_like_p. |
||
|
Tom Tromey
|
4904c3c6b6 |
Make do_is_mi_like_p const.
This changes ui_out to make is_mi_like_p and do_is_mi_like_p "const". ChangeLog 2018-04-30 Tom Tromey <tom@tromey.com> * ui-out.c: Update. * cli-out.h (cli_ui_out::do_is_mi_like_p): Update. * ui-out.h (ui_out::is_mi_like_p): Now const. (ui_out::do_is_mi_like_p): Now const. * mi/mi-out.h (mi_ui_out::do_is_mi_like_p): Update. |
||
|
Tom Tromey
|
7c66fffc1f |
Change Python code to use new_reference
This changes a few spots in the Python code to use new_reference rather than the manual incref+constructor that was previously being done. ChangeLog 2018-04-30 Tom Tromey <tom@tromey.com> * varobj.c (varobj_set_visualizer): Use new_reference. * python/python.c (gdbpy_decode_line): Use new_reference. * python/py-cmd.c (cmdpy_function, cmdpy_completer_helper): Use new_reference. |
||
|
Tom Tromey
|
bbfa6f0086 |
Use new_reference for struct value
value_incref returned its argument just as a convenience, which in the end turned out to only be used in precisely the cases where new_reference helps. So, this patch changes value_incref to return void and changes some value-using code to use new_reference. I also noticed that the comments for value_incref and value_decref were swapped, so this patch fixes those. ChangeLog 2018-04-30 Tom Tromey <tom@tromey.com> * varobj.c (install_new_value): Use new_reference. * value.h (value_incref): Return void. Swap intro comment with value_decref. * value.c (set_value_parent): Use new_reference. (value_incref): Return void. Update intro comment. (release_value): Use new_reference. * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use new_reference. |