* cpustate.c (aarch64_get_FP_half): New function. Read a vector
register as a half precision floating point number.
(aarch64_set_FP_half): New function. Similar, but for setting
a half precision register.
(aarch64_get_thread_id): New function. Returns the value of the
CPU's TPIDR register.
(aarch64_get_FPCR): New function. Returns the value of the CPU's
floating point control register.
(aarch64_set_FPCR): New function. Set the value of the CPU's FPCR
register.
* cpustate.h: Add prototypes for new functions.
* sim-main.h (struct _sim_cpu): Add FPCR and tpidr fields.
* memory.c: Use unaligned core access functions for all memory
reads and writes.
* simulator.c (HALT_NYI): Generate an error message if tracing
will not tell the user why the simulator is halting.
(HALT_UNREACHABLE): Delete. Delete (unneeded) uses of the macro.
(INSTR): New time-saver macro.
(fldrb_abs): New function. Loads an 8-bit value using a scaled
offset.
(fldrh_abs): New function. Likewise for 16-bit values.
(do_vec_SSHL): Allow for negative shift values.
(do_vec_USHL): Likewise.
(do_vec_SHL): Correct computation of shift amount.
(do_vec_SSHR_USHR): Correct decision of signed vs unsigned
shifts and computation of shift value.
(clz): New function. Counts leading zero bits.
(do_vec_CLZ): New function. Implements CLZ (vector).
(do_vec_MOV_element): Call do_vec_CLZ.
(dexSimpleFPCondCompare): Implement.
(do_FCVT_half_to_single): New function. Implements one of the
FCVT operations.
(do_FCVT_half_to_double): New function. Likewise.
(do_FCVT_single_to_half): New function. Likewise.
(do_FCVT_double_to_half): New function. Likewise.
(dexSimpleFPDataProc1Source): Call new FCVT functions.
(do_scalar_SHL): Handle negative shifts.
(do_scalar_shift): Handle SSHR.
(do_scalar_USHL): New function.
(do_double_add): Simplify to just performing a double precision
add operation. Move remaining code into...
(do_scalar_vec): ... New function.
(dexLoadUnsignedImmediate): Call new fldrb_abs and fldrh_abs
functions.
(system_get): Add support for TPIDR, CTR, FPCR, FPSR and CPSR
registers.
(system_set): New function.
(do_MSR_immediate): New function. Stub for now.
(do_MSR_reg): New function. Likewise. Partially implements MSR
instruction.
(do_SYS): New function. Stub for now,
(dexSystem): Call new functions.
This comment is out of date. We've already done that. Patch is to remove
it.
gdb:
2016-03-23 Yao Qi <yao.qi@linaro.org>
* gdbarch.sh (software_single_step): Remove comments.
* gdbarch.h: Regenerated.
if the condition is true then we know that str already points to a'\0' in the
string passed to the function. Since we know the latter part of the function
doesn't modify that string, and str already points to a null byte there's no
point in changing str to point to a literal empty string.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-pdp11.c (md_assemble): Remove useless if and assignment to
str.
This lets us avoid assigning a literal to a char *, and perhaps more
importantly makes it clearer what is going on here.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-sparc.c (sparc_regname_to_dw2regnum): Replace strchr ()
call with a switch.
This increases consistancy of how we allocate memory, and always casting the
result to the proper type. It also helps make sure we get any use of sizeof on
the result type correct.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* listing.c (listing_message): Use XNEW style allocation macros.
* read.c (read_a_source_file): Likewise.
(read_symbol_name): Likewise.
(s_mri_common): Likewise.
(assign_symbol): Likewise.
(s_reloc): Likewise.
(emit_expr_with_reloc): Likewise.
(s_incbin): Likewise.
(s_include): Likewise.
* sb.c (sb_build): Likewise.
(sb_check): Likewise.
PR ld/19803
* ldlang.c (lang_add_gc_name): New function. Adds the provided
symbol name to the list of gc symbols.
(lang_process): Call lang_add_gc_name with entry_symbol_default if
entry_symbol.name is NULL. Use lang_add_gc_name to add the init
and fini function names.
* pe-dll.c (process_def_file_and_drectve): Add exported names to
the gc symbol list.
* testsuite/ld-pe/pr19803.s: Do not export _testval symbol.
* testsuite/ld-pe/pr19803.d: Tweak expected output.
One of the tic54x testcases looks for a section alignment of 1. After
9136aa49 the alignment became 0. While it happens that an alignment
of 0 is treated as an alignment of 1, there is no reason to not apply
the explicit alignment.
* write.c (record_alignment): Revert 2016-02-18 change.
bfd * warning.m4 (GCC_WARN_CFLAGS): Only add -Wstack-usage if using a
sufficiently recent version of GCC.
* configure: Regenerate.
others * configure: Regenerate.
During LTO, if (1) an IR file contains a COMDAT group that is kept,
(2) a later non-claimed file contains the same group, which we discard,
and (3) the plugin fails to provide a definition of the symbols in that
COMDAT group, gold silently resolves any references to those symbols
to 0.
This patch adds a check for a placeholder symbol when deciding
whether to issue an undefined symbol error. It also adds an extra
note after any undefined placeholder symbol error that explains
that a definition was expected from the plugin.
gold/
PR gold/19842
* errors.cc (Errors::undefined_symbol): Add info message when
symbol should have been provided by a plugin.
* target-reloc.h (issue_undefined_symbol_error): Check for
placeholder symbols defined in discarded sections.
* testsuite/Makefile.am (plugin_test_9b): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_test_9b_elf.cc: New test source file.
* testsuite/plugin_test_9b_ir.cc: New test source file.
Adds the first few nps400 instructions.
gas/ChangeLog:
* testsuite/gas/arc/nps400-0.d: New file.
* testsuite/gas/arc/nps400-0.s: New file.
* testsuite/gas/arc/nps400-1.d: New file.
* testsuite/gas/arc/nps400-1.s: New file.
include/ChangeLog:
* opcodes/arc.h (insn_class_t): Add BITOP type.
opcodes/ChangeLog:
* arc-nps400-tbl.h: New file.
* arc-opc.c: Add top level comment.
(insert_nps_3bit_dst): New function.
(extract_nps_3bit_dst): New function.
(insert_nps_3bit_src2): New function.
(extract_nps_3bit_src2): New function.
(insert_nps_bitop_size): New function.
(extract_nps_bitop_size): New function.
(arc_flag_operands): Add nps400 entries.
(arc_flag_classes): Add nps400 entries.
(arc_operands): Add nps400 entries.
(arc_opcodes): Add nps400 include.
When parsing the operand instruction flags we don't currently detect the
case where multiple flags are provided from the same class set, these
will be accepted and the bit values merged together, resulting in the
wrong instruction being assembled. For example:
adc.n.eq r0,r0,r2
Will assemble without error, yet, upon disassembly, the instruction will
actually be:
adc.c r0,r0,r2
In a later commit the concept of required flags will be introduced.
Required flags are just like normal instruction flags, except that they
must be present for the instruction to match. Adding this will allow
for simpler instructions in the instruction table, and allow for more
sharing of operand extraction and insertion functions.
To solve both of the above issues (multiple flags being invalid, and
required flags), this commit reworks the flag class mechanism.
Currently the flag class is never used. Each instruction can reference
multiple flag classes, each flag class has a class type and a set of
flags. However, at present, the class type is never used. The current
values identify the type of instruction that the flag will be used in,
but this is not required information.
Instead, this commit discards the old flag classes, and introduces 3 new
classes. The first F_CLASS_NONE, is just a NULL marker value, and is
only used in the NULL marker flag class. The other two flag classes are
F_FLAG_OPTIONAL, and F_FLAG_REQUIRED.
The class F_FLAG_OPTIONAL has the property that at most one of the flags
in the flag set for that class must be present in the instruction. The
"at most" one means that no flags being present is fine.
The class F_FLAG_REQUIRED is not currently used, but will be soon. With
this class, exactly one of the flags from this class must be present in
the instruction. If the flag class contains a single flag, then of
course that flag must be present. However, if the flag class contained
two or more, then one, and only one of them must be present.
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Move lnflg, and i
declarations to start of block. Reset code on all flags before
attempting to match them. Handle multiple hits on the same flag.
Handle flag class.
* testsuite/gas/arc/asm-errors.d: New file.
* testsuite/gas/arc/asm-errors.err: New file.
* testsuite/gas/arc/asm-errors.s: New file.
include/ChangeLog:
* opcode/arc.h (flag_class_t): Remove all old flag classes, add 3
new classes instead.
opcodes/ChangeLog:
* arc-opc.c (arc_flag_classes): Convert all flag classes to use
the new class enum values.
This commit introduces the nps400 machine type as a variant of arc.
There's a new flag in the assembler to select this machine type. All
other changes are just adding handling of the new machine type into the
relevant places.
The nps400 is an arc700 variant with some vendor specific instructions
added into the instruction set. This commit does not add any of the new
instructions, this is just laying the groundwork for future commits.
However, in preparation for these new instructions a new opcode define for
nps400 has been added to include/opcode/arc.h, this new opcode define is
used in the assembler and disassembler along with the existing define
for arc700 such that when assembling and disassembling for nps400 the
user will have access to all arc700 instructions and all the nps400
vendor extension instructions.
bfd/ChangeLog:
* archures.c (bfd_mach_arc_nps400): Define.
* bfd-in2.h: Regenerate.
* cpu-arc.c (arch_info_struct): New entry for nps400, renumber
some existing entries to make space.
* elf32-arc.c (arc_elf_object_p): Add nps400 case.
(arc_elf_final_write_processing): Likewise.
binutils/ChangeLog:
* readelf.c (decode_ARC_machine_flags): Handle nps400.
gas/ChangeLog:
* config/tc-arc.c (cpu_types): Add nps400 entry.
(check_zol): Handle nps400.
include/ChangeLog:
* elf/arc.h (E_ARC_MACH_NPS400): Define.
* opcode/arc.h (ARC_OPCODE_NPS400): Define.
opcodes/ChangeLog:
* arc-dis.c (print_insn_arc): Handle nps400.
The constant EF_ARC_CPU_GENERIC is defined in the include/elf/arc.h
file, and is used in a few places in binutils, however, this constant
should never make it into the elf header flags; we always set a valid
cpu type in the assembler, which should then be copied over during
linking.
There are some non-gnu arc compilers that don't write an architecture
type into the e_flags field, instead leaving the field as 0, which is
the EF_ARC_CPU_GENERIC value. This non-gnu compiler uses the machine
type to distinguish between the old and newer arc architectures, setting
the machine type to EM_ARC_COMPACT for old arc600, arc601, and arc700
architectures, while using EM_ARC_COMPACT2 for newer arcem and archs
architectures.
Previously when displaying the machine flags for an older EM_ARC_COMPACT
machine, if the e_flags had not been filled in, then we relied on the
default case statement to display the message "Generic ARCompact", while
in the EM_ARC_COMPACT2 case we specifically handled EF_ARC_CPU_GENERIC
to print "ARC Generic", leaving the default case to print a message
about unrecognised cpu flag.
After this commit EF_ARC_CPU_GENERIC has been removed, for both machine
types EM_ARC_COMPACT and EM_ARC_COMPACT2 we now rely on the default case
statement to handle the situation where the e_flags has not been filled
in. The message displayed is now "Unknown ARCompact" (for older arc
architectures) and "Unknown ARC" (for the newer architectures). The
switch from "Generic" to "Unknown" in the message string is for clarity,
calling the file "Generic" can give the impression that the file is
compiled for a common sub-set of the architectures, and would therefore
run on any type of machine (or at least any type of new or old machine
depending on if the machine type is ARC or ARCv2). However, this was
not what "Generic" meant, it really meant "Unknown", so that's what we
now say.
As part of the merging of the readelf flag reading code, I have unified
the strings used in displaying the ELF ABI. This means that for older
arc machines (arc600, arc601, and arc700) the string used for the
original ABI, and ABIv2 have changed, the current ABIv3 remains the
same. For the newer architectures (arcem and archs) the abi strings
remain unchanged in all cases.
bfd/ChangeLog:
* elf32-arc.c (arc_elf_print_private_bfd_data): Remove use of
EF_ARC_CPU_GENERIC.
(arc_elf_final_write_processing): Don't bother setting cpu field
in e_flags, this will have been set elsewhere.
binutils/ChangeLog:
* readelf.c (get_machine_flags): Move arc processing into...
(decode_ARC_machine_flags): ... new function. Remove use of
EF_ARC_CPU_GENERIC, change default case from "generic arc" to
"unknown arc". Merged ABI printing between two machine types.
gas/ChangeLog:
* config/tc-arc.c (arc_select_cpu): Remove use of
EF_ARC_CPU_GENERIC.
include/ChangeLog:
* elf/arc.h (EF_ARC_CPU_GENERIC): Delete. Update related comment.
In the include/elf/arc.h there are two constants that mask out the
machine architecture field. One is used lots (EF_ARC_MACH_MSK), the
other is used only once (EF_ARC_MACH). Remove EF_ARC_MACH.
bfd/ChangeLog:
* elf32-arc.c (arc_elf_final_write_processing): Switch to using
EF_ARC_MACH_MSK.
include/ChangeLog:
* elf/arc.h (EF_ARC_MACH): Delete.
(EF_ARC_MACH_MSK): Remove out of date comment.
This commit restructures the selection of the default cpu/mach so that
the choice is made from md_begin (if the user has not provided a command
line choice). This will reduce the amount of change needed in a later
patch.
At the request of Synopsys, the default architecture changes to ARC700
from this commit, previously the default was a non-existent
super-architecture that contained all instructions from all arc
variants. There's some clean up associated with removing the default
merged architecture, and a small test fix now that the default is
ARC700.
binutils/ChangeLog:
* testsuite/binutils-all/objdump.exp (cpus_expected): Add ARC700
to the architecture list.
gas/ChangeLog:
* config/tc-arc.c (arc_target): Delay initialisation until
arc_select_cpu.
(arc_target_name): Likewise.
(arc_features): Likewise.
(arc_mach_type): Likewise.
(cpu_types): Remove "all" entry.
(arc_select_cpu): New function, most of the content is from...
(md_parse_option): ... here. Call new arc_select_cpu.
(md_begin): Call arc_select_cpu if needed, default is now arc700.
include/ChangeLog:
* opcode/arc.h (ARC_OPCODE_BASE): Delete.
opcodes/ChangeLog:
* arc-opc.c (BASE): Delete.
The inline-data test checks the specific bytes laid down by the
assembler, and so relies on the endianness of the target. I could
change the expected results to be endian agnostic, however, I worried
that a bug in the assembler that gets the endianness wrong would then
slip through. Instead I add a new test for big-endian arc, and restrict
the existing test to little-endian arc.
gas/ChangeLog:
* testsuite/gas/arc/inline-data-1.d: Add target restriction.
* testsuite/gas/arc/inline-data-2.d: New file.
This patch is to support some ARM median instructions in process
record. With this patch applied, these fails are fixed:
-FAIL: gdb.reverse/break-precsave.exp: run to end of main
-FAIL: gdb.reverse/break-precsave.exp: go to end of main forward
-FAIL: gdb.reverse/break-precsave.exp: end of record log
-FAIL: gdb.reverse/break-reverse.exp: continue to breakpoint: end
-FAIL: gdb.reverse/break-reverse.exp: end of record log
-FAIL: gdb.reverse/until-precsave.exp: run to end of main
-FAIL: gdb.reverse/until-precsave.exp: advance to marker2
-FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame
-FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2
-FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2
-FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial
-FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial
-FAIL: gdb.reverse/until-reverse.exp: advance to marker2
-FAIL: gdb.reverse/until-reverse.exp: until func, not called by current frame
-FAIL: gdb.reverse/until-reverse.exp: reverse-advance to marker2
-FAIL: gdb.reverse/until-reverse.exp: reverse-finish from marker2
-FAIL: gdb.reverse/until-reverse.exp: reverse-advance to final return of factorial
-FAIL: gdb.reverse/until-reverse.exp: reverse-until to entry of factorial
gdb:
2016-03-21 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_record_media): New.
(arm_record_ld_st_reg_offset): Call arm_record_media.
This patch is to canonicalize more syscalls on arm linux in process
record. In this patch, I also comment out some syscalls which isn't
handled by GDB now. With this patch applied, two fails are fixed.
-FAIL: gdb.reverse/fstatat-reverse.exp: continue to breakpoint: marker2
-FAIL: gdb.reverse/recvmsg-reverse.exp: continue to breakpoint: marker2
gdb:
2016-03-21 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_canonicalize_syscall): Canonicalize
more syscalls.
When running ld -r on objects that have comdat groups, when gold
deduplicates a function in a comdat group, it removes the relocations
from the EH information that referred to the dropped copy of the function.
When running a final link using the result of the -r link, the missing
relocation cause it to fail to recognize the FDE for the dropped
function.
This patch improves gold's FDE scanning to take into account the
possibility that an FDE corresponds to a dropped function, and drops
that FDE as well.
Gnu ld, on the other hand, leaves the relocations in the ld -r output,
but makes them R_NONE with an r_sym field of 0. This was sufficient to
let both linkers recognize the FDE properly.
With this fix, if you do an ld -r with gold, then do the final link with
Gnu ld, the .eh_frame_hdr section will not be generated. To make it work
with Gnu ld, we would have to leave the R_NONE relocations in, but I
think it's better to drop the relocations entirely. I'd hope that if
you're doing a -r link with gold, you'll also do the final link with
gold.
gold/
PR gold/19002
* ehframe.cc (Eh_frame::read_fde): Check for dropped functions.
* testsuite/Makefile.am (eh_test_2): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/eh_test_2.sh: New test script.
* testsuite/eh_test_a.cc (bar): Make it comdat.
* testsuite/eh_test_b.cc (bar): Add a duplicate copy.
char can be a signed type, and some of the values in these arrays are greater
than 0x80 which means they are outside of the range a signed char can store.
Fortunately it seems most compilers handle this in the obvious way by storing
the same bits as a negative number, but this is wierd and easily fixed.
gas/ChangeLog:
2016-03-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* tc-i386.c (f32_1): Change type to unsigned char[].
(f32_2): Likewise.
(f32_3): Likewise.
(f32_4): Likewise.
(f32_5): Likewise.
(f32_6): Likewise.
(f32_7): Likewise.
(f32_8): Likewise.
(f32_9): Likewise.
(f32_10): Likewise.
(f32_11): Likewise.
(f32_12): Likewise.
(f32_13): Likewise.
(f32_14): Likewise.
(f16_3): Likewise.
(f16_4): Likewise.
(f16_5): Likewise.
(f16_6): Likewise.
(f16_7): Likewise.
(f16_8): Likewise.
(jump_31): Likewise.
(f32_patt): Likewise.
(f16_patt): Likewise.
(alt_3): Likewise.
(alt_4): Likewise.
(alt_5): Likewise.
(alt_6): Likewise.
(alt_7): Likewise.
(alt_8): Likewise.
(alt_9): Likewise.
(alt_10): Likewise.
(alt_patt): Likewise.
PR target/19721
opcodes * aarch64-tbl.h (aarch64_opcode_table): Fix type of second operand
of MOV insn that aliases an ORR insn.
gas * testsuite/gas/aarch64/pr19721.s: New test source file.
* testsuite/gas/aarch64/pr19721.d: New test driver file.
sparc_software_single_step is not used out of sparc-tdep.c, so this
patch makes it static.
gdb:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* sparc-tdep.c (sparc_software_single_step): Make it static.
* sparc-tdep.h (sparc_software_single_step): Remove declaration.
I happen to see that 1 is returned in spu_software_single_step when
target_read_memory returns 1. It must be wrong. That patch changes
it to throwing an error. Note that I choose to throw error because I
find the code in the end of spu_software_single_step throws errors.
gdb:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* spu-tdep.c (spu_software_single_step): Throw error when
target_read_memory fails.
The enqueue and dequeue signals in linux_resume_one_lwp_throw use one
condition and its inverted one. This patch is to move the condition
into a function lwp_signal_can_be_delivered, so that the next patch can
change the condition in one place.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (lwp_signal_can_be_delivered): New function.
(linux_resume_one_lwp_throw): Use lwp_signal_can_be_delivered.
Today, we enqueue signal in linux_resume_one_lwp_throw, but set
variable 'signal' many lines below with the comment
/* Postpone any pending signal. It was enqueued above. */
signal = 0;
I feel difficult to associate code across many lines, and we should
move the code close to enqueue_pending_signal call. This is what
this patch does in general. After this change, variable 'signal'
is set to zero very early, so the 'signal' value in the following
debugging message makes no sense, so I remove it from the debugging
message. The function returns early if lwp->status_pending_p is
true, so 'signal' value in the debugging message doesn't matter,
AFAICS. Also, I move one debugging message several lines below to
make it close the real ptrace call,
if (debug_threads)
debug_printf ("Resuming lwp %ld (%s, signal %d, stop %s)\n",
lwpid_of (thread), step ? "step" : "continue", signal,
lwp->stop_expected ? "expected" : "not expected");
so that the debugging message can reflect what GDBserver does. This
is a code refactor and only debugging messages are affected.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_resume_one_lwp_throw): Set 'signal' to
0 if signal is enqueued. Remove 'signal' from one debugging
message. Move one debugging message to some lines below.
Remove code setting 'signal' to 0.
WIFSTOPPED is checked linux_wstatus_maybe_breakpoint, so WIFSTOPPED
in "WIFSTOPPED (wstat) && linux_wstatus_maybe_breakpoint (wstat)"
is redundant. This patch removes WIFSTOPPED check.
gdb/gdbserver:
2016-03-18 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_low_filter_event): Remove redundant
WIFSTOPPED check together with linux_wstatus_maybe_breakpoint.
gas * doc/as.texinfo: Place the target specific command line options
into their own man page section.
etc * texi2pod.pl: Add TARGET to the list of recognised man page
sections.
Nick Clifton
Yao Qi
GDB Administrator
Trevor Saunders
Trevor Saunders
Alan Modra
Cary Coutant
Andrew Burgess
Vladimir Radosavljevic
Awson
Senthil Kumar Selvaraj