Commit Graph

52 Commits

Author SHA1 Message Date
Joel Brobecker ecd75fc8ee Update Copyright year range in all files maintained by GDB. 2014-01-01 07:54:24 +04:00
Pedro Alves 0928e93dfd If a breakpoint is not user visible, then there's no point in
bothering the frontend about it...  This is the exact same check MI
does.

I also smoke tested Emacs 23 in gud-gdb mode, both annotations=2
and annotations=3.  I didn't notice anything break.

gdb/
2013-01-22  Pedro Alves  <palves@redhat.com>

	* annotate.c (breakpoint_changed): Skip if breakpoint is not
	user-visible.

gdb/testsuite/
2013-01-22  Pedro Alves  <palves@redhat.com>

	* gdb.base/annota1.exp (signal sent): No longer expect
	breakpoints-invalid.
	* gdb.cp/annota2.exp (continue until exit)
	(watch triggered on a.x): Ditto.
2013-01-22 20:22:39 +00:00
Pedro Alves 9c97429fb1 All annotate_breakpoints_changed calls are along-side
observer_notify_breakpoints_changed calls.  All, except the
init_raw_breakpoint one.  But that one is actually wrong.  The
breakpoint is being constructed at that point, and hasn't been placed
on the breakpoint chain yet.  It would be better placed in
install_breakpoint, and I actually started out that way.  But once the
annotate_breakpoints_changed are parallel to the observer calls, we
can fully move annotations to observers too.

One issue is that this changes the order of annotations a bit.
Before, we'd emit the annotation, and after call "mention()" on the
breakpoint (which prints the breakpoint number, etc.).  But, we call
the observers _after_ mention is called, so the annotation output will
change a little:

void
install_breakpoint (int internal, struct breakpoint *b, int update_gll)
{
  add_to_breakpoint_chain (b);
  set_breakpoint_number (internal, b);
  if (is_tracepoint (b))
    set_tracepoint_count (breakpoint_count);
  if (!internal)
    mention (b);
  observer_notify_breakpoint_created (b);

  if (update_gll)
    update_global_location_list (1);
}

I believe this order doesn't really matter (the frontend needs to wait
for the prompt anyway), so I just adjust the expected output in the
tests.  Emacs in annotations mode doesn't seem to complain.  Couple
that with the previous patch that suppressed duplicated annotations,
and, the fact that some annotations calls were actually missing (were
we do have observer calls), more changes to the tests are needed
anyway.

Tested on x86_64 Fedora 17.

gdb/
2013-01-22  Pedro Alves  <palves@redhat.com>

	* annotate.c (annotate_breakpoints_changed): Rename to ...
	(annotate_breakpoints_invalid): ... this.  Make static.
	(breakpoint_changed): Adjust.
	(_initialize_annotate): Always install the observers.  Install a
	"breakpoint_created" observer.
	* annotate.h (annotate_breakpoints_changed): Delete declaration.
	* breakpoint.c (set_breakpoint_condition)
	(breakpoint_set_commands, do_map_commands_command)
	(init_raw_breakpoint, clear_command, set_ignore_count)
	(enable_breakpoint_disp): No longer call
	annotate_breakpoints_changed.

gdb/testsuite/
2013-01-22  Pedro Alves  <palves@redhat.com>

	* gdb.base/annota1.exp (breakpoints_invalid): New variable.
	Adjust tests to breakpoints-invalid changes.
	* gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New
	variables.
	Adjust tests to breakpoints-invalid changes.
2013-01-22 20:19:40 +00:00
Pedro Alves bd00c69423 With some changes to how software single-step (SSS) breakpoints are
handled, one of those being to place SSS breakpoints on the breakpoint
chain as all other breakpoints, annota1.exp times out with lots and
lots of breakpoint-invalid and frame-changed annotations.  All those
extra annotations are actually unnecessary.  For one, SSS breakpoints
are internal breakpoints, so the frontend shouldn't care if they were
added, removed or changed.  Then, there's really no point in emitting
"breakpoints-invalid" or "frames-invalid" more than once between times
the frontend/user can actually issues GDB commands; the frontend will
have to wait for the GDB prompt to refresh its state, so emitting
those annotations at most once between prompts is enough.  Non-stop or
async would complicate this, but no frontend will be using annotations
in those modes (one of goes of emacs switching to MI was non-stop mode
support, AFAIK).  The previous patch reveals there has been an
intention in the past to suppress multiple breakpoints-invalid
annotations caused by ignore count changes.  As the previous patch
shows, that's always been broken, but in any case, this patch actually
makes it work.  The next patch will remove several annotation-specific
calls in breakpoint.c in favor of always using the breakpoint modified
& friends observers, and that causes yet more of these annotations,
because several calls to the corresponding annotate_* functions in
breakpoint.c are missing, particularly in newer code.

So all in all, here's a simple mechanism that avoids sending the same
annotation to the frontend more than once until gdb is ready to accept
further commands.

Tested on x86_64 Fedora 17.

2013-01-22  Pedro Alves  <palves@redhat.com>

	* annotate.c: Include "inferior.h".
	(frames_invalid_emitted)
	(breakpoints_invalid_emitted): New globals.
	(async_background_execution_p): New function.
	(annotate_breakpoints_changed, annotate_frames_invalid): Skip
	emitting the annotation if it has already been emitted.
	(annotate_display_prompt): New function.
	* annotate.h (annotate_display_prompt): New declaration.
	* event-top.c: Include annotate.h.
	(display_gdb_prompt): Call annotate_display_prompt.
2013-01-22 20:17:10 +00:00
Pedro Alves 187d10dd19 There's code in annotate.c and breakpoint.c that is supposed to
suppress multiple breakpoints-invalid annotations when the ignore
count of a breakpoint changes, up until the target actually stops.

But, the code is bogus:

void
annotate_breakpoints_changed (void)
{
  if (annotation_level == 2)
    {
      target_terminal_ours ();
      printf_unfiltered (("\n\032\032breakpoints-invalid\n"));
      if (ignore_count_changed)
	ignore_count_changed = 0;   /* Avoid multiple break annotations.  */
    }
}

The "ignore_count_changed" flag isn't actually guarding the output of
the annotation at all.  It would have been better written something
like:

void
annotate_breakpoints_changed (void)
{
  if (annotation_level == 2 && !ignore_count_changed)
    {
      target_terminal_ours ();
      printf_unfiltered (("\n\032\032breakpoints-invalid\n"));
      ignore_count_changed = 0;   /* Avoid multiple break annotations.  */
    }
}

but, it wasn't.  AFAICS, that goes all the way back to the original
patch'es submission and check in, at
<http://sourceware.org/ml/gdb-patches/1999-q4/msg00106.html>.  I
looked a tar of HP's wdb from 1999, and even though that contains
local changes in the annotate code, this suppression seems borked
there too to me.

The original patch added a test to supposedly exercise this
suppression, but, it actually doesn't.  It merely tests that
"breakpoints-invalid" is output after "stopped", but doesn't check
whether the duplicates supression actually works (IOW, check that only
_one_ annotation is seen).  I was going to simply delete the tests
too, but a following patch will eliminate the duplicates in a
different way (which I needed for a different reason), so instead, I'm
making the tests actually fail if a duplicate annotation is seen.

Worry not, the test doesn't actually fail!  The reason is that
breakpoint.c does:

      else if (b->ignore_count > 0)
	{
	  b->ignore_count--;
	  annotate_ignore_count_change ();
	  bs->stop = 0;
	  /* Increase the hit count even though we don't stop.  */
	  ++(b->hit_count);
	  observer_notify_breakpoint_modified (b);
	}

where the annotate_ignore_count_change call is meant to inform the
"breakpoint_modified" annotation observer to ignore the notification.
All sounds good.  But, the trouble is that nowadays annotate.c only
installs the observers if GDB is started with annotations enabled with
a command line option (gdb --annotate=2):

void
_initialize_annotate (void)
{
  if (annotation_level == 2)
    {
      observer_attach_breakpoint_deleted (breakpoint_changed);
      observer_attach_breakpoint_modified (breakpoint_changed);
    }
}

and annota1.exp, to enable annotations, starts GDB normally, and
afterwards does "set annotate 2", so the observers aren't installed
when annota1.exp is run, and therefore changing the ignore count isn't
triggering any annotation at all...

gdb/
2013-01-22  Pedro Alves  <palves@redhat.com>

	* annotate.c (ignore_count_changed): Delete.
	(annotate_breakpoints_changed): Don't clear ignore_count_changed.
	(annotate_ignore_count_change): Delete.
	(annotate_stopped): Don't emit a delayed breakpoints-changed
	annotation.
	* annotate.h (annotate_ignore_count_change): Delete.
	* breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
	annotate_ignore_count_change.

gdb/testsuite/
2013-01-22  Pedro Alves  <palves@redhat.com>

	* gdb.base/annota1.exp (annotate ignore count change): Add
	expected output for failure case.
2013-01-22 20:08:30 +00:00
Joel Brobecker 28e7fd6234 Update years in copyright notice for the GDB files.
Two modifications:
  1. The addition of 2013 to the copyright year range for every file;
  2. The use of a single year range, instead of potentially multiple
     year ranges, as approved by the FSF.
2013-01-01 06:33:28 +00:00
Pedro Alves ef37bb07f0 2012-11-20 Pedro Alves <palves@redhat.com>
* annotate.c (breakpoints_changed): Rename to ...
	(annotate_breakpoints_changed): ... this.
	(annotate_stopped, breakpoint_changed): Adjust caller.
	* annotate.h (breakpoints_changed): Rename to ...
	(annotate_breakpoints_changed): ... this.
	* breakpoint.c (set_breakpoint_condition, breakpoint_set_commands)
	(do_map_commands_command, init_raw_breakpoint, clear_command)
	(set_ignore_count, enable_breakpoint_disp): Adjust callers.
2012-11-20 17:49:02 +00:00
Joel Brobecker 0b30217134 Copyright year update in most files of the GDB Project.
gdb/ChangeLog:

        Copyright year update in most files of the GDB Project.
2012-01-04 08:17:56 +00:00
Andrey Smirnov 917793afae * annotate.c (annotate_array_section_begin): Rename `index' to
`idx'(-Wshadow).
2011-12-11 02:44:15 +00:00
Vladimir Prus 8d3788bd59 MI breakpoint notifications.
* annotate.c (breakpoint_changed): Adjust parameter type.
        * breakpoint.c (set_breakpoint_condition): Adjust to change
        in breakpoint_modified type.
        (breakpoint_set_commands): Likewise.
        (do_map_commands_command): Likewise.
        (bpstat_check_breakpoint_conditions): Notify that breakpoint has
        changed after bumping hit count.
        (bpstat_stop_status): Likewise.
        (print_one_breakpoint_location): Don't wrap in tuple here.
        (print_one_breakpoint): Always print individual locations.
        For locations, use unnamed tuple.
        (disable_breakpoints_in_unloaded_shlib): Notify that breakpoint
        has changed.
        (create_catchpoint, create_syscall_event_catchpoint): Call
        breakpoint_created obsever.
        (mention): Don't call breakpoint_created observer.
        (create_breakpoint_sal): Call breakpoint_created observer.
        (create_breakpoint, watch_command_1): Likewise.
        (create_ada_exception_breakpoint): Likewise.
        (delete_breakpoint): Call breakpoint_deleted breakpoint.
        (locations_are_equal): New.
        (update_breakpoint_locations): If locations were changed, notify.
        (set_ignore_count, disable_breakpoint, do_enable_breakpoint):
        Call breakpoint_modified observer.

        * mi/mi-cmd-break.c (breakpoint_notify): Adjust.
        (mi_cmd_break_insert): Don't set observers for modify and delete.
        * mi/mi-interp.c (mi_suppress_breakpoint_notifications): New.
        (mi_breakpoint_created, mi_breakpoint_deleted)
        (mi_breakpoint_modified): New.
        (mi_interpreter_init): Hook the above.
        * mi/mi-main.c (mi_cmd_execute): Disable breakpoint notifications
        while -break-* commands are executing.
        * mi/mi-main.h (mi_suppress_breakpoint_notifications): New.
        * mi/mi-out.c (struct ui_out_data): New field original_buffer.
        (mi_redirect): New.
        (mi_ui_out_impl): Hook in mi_redirect.
        (mi_field_skip): True to the name, skip the field, don't output
        a field with an empty value.

        * python/py-breakpoint.c (gdbpy_breakpoint_created)
        (gdbpy_breakpoint_deleted): Adjust.
        * tui/tui-hooks.c (tui_event_create_breakpoint)
        (tui_event_delete_breakpoint, tui_event_modify_breakpoint): Adjust.
2011-04-27 10:17:39 +00:00
Joel Brobecker 7b6bb8daac run copyright.sh for 2011. 2011-01-01 15:34:07 +00:00
Michael Snyder 0e2de36609 2010-12-31 Michael Snyder <msnyder@vmware.com>
* annotate.c: Comment cleanup, shorten long lines.
	* arch-utils.c: Ditto.
	* arch-utils.h: Ditto.
	* auxv.c: Ditto.
	* auxv.h: Ditto.
	* ax-gdb.c: Ditto.
	* ax-gdb.h: Ditto.
	* ax-general.c: Ditto.
	* breakpoint.h: Ditto.
	* buildsym.h: Ditto.
2010-12-31 19:16:37 +00:00
Joel Brobecker 4c38e0a4fc Update copyright year in most headers.
Automatic update by copyright.sh.
2010-01-01 07:32:07 +00:00
Ulrich Weigand 5af949e350 * defs.h (strlen_paddr, paddr, paddr_nz): Remove.
(paddress): Add GDBARCH parameter.
	* utils.c (strlen_paddr, paddr, paddr_nz): Remove.
	(paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
	* ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
	* ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
	use it instead of current_gdbarch.

	Update calls to ui_out_field_core_addr to pass architecture:
	* ada-lang.c (print_one_exception): Update.
	* breakpoint.c (print_one_breakpoint_location,
	print_one_exception_catchpoint): Update.
	* disasm.c (dump_insns): Update.
	* darwin-nat-info.c (darwin_debug_regions_recurse): Update.
	* mi/mi-main.c (mi_cmd_data_read_memory): Update.
	* mi/mi-symbol-cmds.c: Include "objfiles.h".
	(mi_cmd_symbol_list_lines): Update.
	* stack.c (print_frame_info, print_frame): Update.

	Update callers of paddress to pass architecture:
	* ada-tasks.c (info_task): Update.
	* ada-valprint.c (ada_val_print_1): Update.
	* annotate.c (annotate_source, annotate_frame_begin): Update.
	* breakpoint.c (insert_bp_location, describe_other_breakpoints,
	mention): Update.
	* cli/cli-cmds.c (edit_command, list_command, print_disassembly):
	Update.
	* corefile.c (memory_error): Update.
	* c-valprint.c (print_function_pointer_address, c_val_print): Update.
	* disasm.c (dis_asm_print_address): Update.
	* exec.c (print_section_info): Update.
	* f-valprint.c (f_val_print): Update.
	* infcmd.c: Include "arch-utils.h".
	(jump_command, program_info): Update.
	* linux-fork.c: Include "arch-utils.h".
	(info_forks_command): Update.
	* m2-valprint.c (print_function_pointer_address,
	print_unpacked_pointer, print_variable_at_address,
	m2_val_print): Update.
	* m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
	Update.
	* printcmd.c (print_address, print_address_demangle, address_info):
	Update.
	* p-valprint.c (pascal_val_print): Update.
	* source.c: Include "arch-utils.h".
	(line_info): Update.
	* stack.c (frame_info, print_block_frame_labels): Update.
	* symfile.c (add_symbol_file_command, list_overlays_command): Update.
	* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
	print_symbol, print_partial_symbols, maintenance_info_psymtabs,
	maintenance_check_symtabs): Update.
	* symtab.c (find_pc_sect_symtab): Update.
	* target.c (deprecated_debug_xfer_memory): Update.
	* tracepoint.c (scope_info): Update.
	* tui/tui-stack.c (tui_make_status_line): Update.
	* valprint.c (val_print_string): Update.

	Update callers of paddr_nz to use paddress instead (keeping
	user-visible output identical):
	* alpha-tdep.c (alpha_heuristic_proc_start): Update.
	* amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
	amd64_displaced_step_fixup): Update.
	* arch-utils.c (simple_displaced_step_copy_insn): Update.
	* auxv.c (fprint_target_auxv): Update.
	* breakpoint.c (insert_single_step_breakpoint): Update.
	* buildsym.c (finish_block): Update.
	* cli/cli-dump.c (restore_section_callback): Update.
	* fbsd-nat.c (fbsd_find_memory_regions): Update.
	* frame.c (frame_unwind_register_value): Update.
	* gcore.c (gcore_create_callback): Update.
	* hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
	* i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
	i386_record_lea_modrm_addr, i386_record_lea_modrm,
	i386_process_record): Update.
	* ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
	ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
	ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
	* infrun.c (displaced_step_prepare, displaced_step_fixup,
	handle_inferior_event, insert_step_resume_breakpoint_at_sal,
	insert_longjmp_resume_breakpoint): Update.
	* linux-nat.c (linux_nat_find_memory_regions): Update.
	* linux-record.c (record_linux_system_call): Update.
	* mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
	mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
	mips_o64_push_dummy_call): Update.
	* monitor.c (monitor_error, monitor_remove_breakpoint): Update.
	* record.c (record_arch_list_add_mem, record_wait,
	record_xfer_partial): Update.
	* remote-mips.c (mips_fetch_word, mips_check_lsi_error,
	mips_common_breakpoint): Update.
	* remote-sim.c (gdbsim_xfer_inferior_memory): Update.
	* rs6000-tdep.c (ppc_displaced_step_fixup): Update.
	* solib-som.c (som_current_sos): Update.
	* symfile.c (load_progress, generic_load): Update.
	* symfile-mem.c (add_vsyscall_page): Update.
	* valops.c (value_fetch_lazy): Update.
	* windows-tdep.c (windows_xfer_shared_library): Update.

	Update callers of paddr_nz to use paddress instead (changing
	user-visible output to make it more correct):
	* dwarf2loc.c (locexpr_describe_location): Update.
	* ia64-tdep.c (ia64_memory_insert_breakpoint,
	ia64_memory_remove_breakpoint): Update.
	* jv-valprint.c (java_value_print): Update.
	* m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
	* monitor.c (monitor_read_memory): Update.

	Update callers of paddr to use paddress instead (changing
	user-visible output to make it more correct):
	* arm-tdep.c (arm_push_dummy_call): Update.
	* breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
	create_breakpoint): Update.
	* darwin-nat-info.c (darwin_debug_regions): Update.
	* dcache.c (dcache_info): Update.
	* dsrec.c (load_srec, make_srec): Update.
	* dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
	dwarf2_frame_cache): Update.
	* gcore.c (gcore_copy_callback): Update.
	* gnu-nat.c (gnu_xfer_memory): Update.
	* mips-linux-nat.c (mips_show_dr): Update.
	* monitor.c (monitor_write_memory, monitor_insert_breakpoint,
	monitor_remove_breakpoint): Update.
	* remote.c (compare_sections_command): Update.
	* remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
	m32r_remove_breakpoint, m32r_insert_watchpoint,
	m32r_remove_watchpoint): Update.
	* sol-thread.c (info_cb): Update.
	* symfile.c (load_progress): Update.

	Update callers of paddress or paddr_nz to use hex_string instead
	(changes output of internal/error/debug messages only):
	* dwarf2read.c (dump_die_shallow): Update.
	* frame.c (fprint_field, fprint_frame, frame_pc_unwind,
	get_frame_func, create_new_frame): Update.
	* hppa-tdep.c (find_unwind_entry, unwind_command): Update.
	* ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
	ia64_get_dyn_info_list): Update.
	* maint.c (maintenance_translate_address): Update.
	* mi/mi-cmd-var.c (mi_cmd_var_create): Update.
	* target.c (target_flash_erase): Update.

	Update callers of paddr/paddr_nz to use phex/phex_nz instead,
	using an appropriate address size.  Remove use of strlen_paddr.
	* exec.c (exec_files_info): Update.
	* i386-nat.c (i386_show_dr): Update.
	* remote.c (remote_flash_erase): Update.
	* m32r-rom.c (m32r_load_section): Update.
	* monitor.c (monitor_vsprintf, monitor_store_register): Update.
	* remote.c (remote_check_symbols, remote_search_memory): Update.
	* remote-mips.c (mips_request, mips_common_breakpoint): Update.
	* scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
	* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
	* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
	sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
	sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
	sh_dsp_show_regs): Update.
	* xcoffsolib.c (sharedlibrary_command): Update.


	* maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
	Use hex_string_custom instead of paddr.
	(print_bfd_section_info): Pass address size.
	(print_objfile_section_info): Likewise.

	* annotate.h (annotate_source): Add GDBARCH parameter.
	(annotate_frame_begin): Likewise.
	* annotate.c (annotate_source): Add GDBARCH parameter.
	(annotate_frame_begin): Likewise.
	* source.c (identify_source_line): Update call to annotate_source.
	* stack.c (print_frame_info, print_frame): Update call to
	annotate_frame_begin.

	* breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
	(create_breakpoint, create_ada_exception_breakpoint): Update call.

	* stack.c (print_block_frame_labels): Add GDBARCH parameter.
	(print_frame_label_vars): Update call.

	* symmisc.c (print_partial_symbols): Add GDBARCH parameter.
	(dump_psymtab): Update call to print_partial_symbols.
	(struct print_symbol_args): Add GDBARCH member.
	(dump_symtab_1): Set print_symbol_args architecture member.
	(print_symbol): Use it.

	* windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
	parameter.
	* windows-tdep.c (windows_xfer_shared_library): Likewise.
	* i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
	(core_process_module_section): Pass architecture from cpms_data to
	windows_xfer_shared_library.
	(windows_core_xfer_shared_libraries): Initialize cmps_data
	architecture member.
	* windows-nat.c (windows_xfer_shared_libraries): Pass architecture
	to windows_xfer_shared_library.

	* defs.h (print_address): Add GDBARCH parameter.
	* printcmd.c (print_address): Add GDBARCH parameter.
	(print_scalar_formatted, do_examine): Update call.
	* findcmd.c (find_command): Update call.
	* tracepoint.c: Include "arch-utils.h".
	(trace_find_line_command): Update call.
	* tui/tui-disasm.c (tui_disassemble): Update call.

	* value.h (print_address_demangle): Add GDBARCH parameter.
	* printcmd.c (print_address_demangle): Add GDBARCH parameter.
	* c-valprint.c (print_function_pointer_address, c_val_print):
	Update call.
	* f-valprint.c (f_val_print): Update call.
	* gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
	* jv-valprint.c (java_val_print): Update call.
	* m2-valprint.c (print_function_pointer_address, m2_val_print):
	Update call.
	* p-valprint.c (pascal_val_print): Update call.

	* disasm.c (gdb_disassemble_info): Install architecture into
	di.application_data field.

testsuite/ChangeLog:

	* gdb.threads/tls-shared.exp: Update to locexpr_describe_location
	change to prefix TLS offset in hex with 0x.

doc/ChangeLog:

	* gdbint.texinfo (Item Output Functions): Update signature
	for ui_out_field_core_addr.
2009-07-02 17:21:10 +00:00
Joel Brobecker 0fb0cc7590 Updated copyright notices for most files. 2009-01-03 05:58:08 +00:00
Tom Tromey 7f4b89d1b6 * annotate.h (deprecated_annotate_starting_hook): Remove.
(deprecated_annotate_stopped_hook): Remove.
	(deprecated_annotate_exited_hook): Remove.
	* Makefile.in (annotate.o): Depend on observer_h.
	* top.c (deprecated_delete_breakpoint_hook): Remove.
	(deprecated_create_breakpoint_hook): Likewise.
	(deprecated_modify_breakpoint_hook): Likewise.
	* interps.c (clear_interpreter_hooks): Update for removed hooks.
	* breakpoint.c (mention): Don't call removed hook.
	(delete_breakpoint): Likewise.
	(disable_breakpoint): Likewise.
	(do_enable_breakpoint): Likewise.
	* annotate.c: Include observer.h.
	(breakpoint_changed): Change type of argument.
	(_initialize_annotate): Register observers.
	(deprecated_annotate_starting_hook): Remove.
	(deprecated_annotate_stopped_hook): Remove.
	(deprecated_annotate_exited_hook): Remove.
	(annotate_starting): Update for hook removal.
	(annotate_stopped): Likewise.
	(annotate_exited): Likewise.
	* defs.h (deprecated_delete_breakpoint_hook): Remove.
	(deprecated_create_breakpoint_hook): Likewise.
	(deprecated_modify_breakpoint_hook): Likewise.
2008-07-28 17:53:52 +00:00
Nick Roberts b8fa951a9b * annotate.c (annotate_thread_changed): New function.
* thread.c (thread_command) : Use it.
* infrun.c (normal_stop): Use it.
2008-06-06 00:33:52 +00:00
Markus Deuling 50ee753532 * annotate.c (annotate_source, annotate_frame_begin): Replace
deprecated_print_address_numeric with paddress.
	* cli/cli-cmds.c (list_command, edit_command): Likewise.
	* tui/tui-stack.c (tui_make_status_line): Likewise.

	* defs.h (deprecated_print_address_numeric): Remove.
	* printcmd.c (deprecated_print_address_numeric): Remove.
	* maint.c (maint_print_section_info): Fix comment.
2008-05-23 04:31:40 +00:00
Nick Roberts d17d49478f (annotate_new_thread): New function for new-thread
annotation.
2008-05-20 21:03:34 +00:00
Daniel Jacobowitz 9b254dd1ce Updated copyright notices for most files. 2008-01-01 22:53:26 +00:00
Joel Brobecker a9762ec78a Switch the license of all .c files to GPLv3.
Switch the license of all .h files to GPLv3.
        Switch the license of all .cc files to GPLv3.
2007-08-23 18:08:50 +00:00
Daniel Jacobowitz 6aba47ca06 Copyright updates for 2007. 2007-01-09 17:59:20 +00:00
Nick Roberts 24ca47234f (annotate_frame_begin): Re-instate frame-begin annotation for level 3
annotations.
2006-07-13 07:43:44 +00:00
Eli Zaretskii 197e01b6dc * breakpoint.c:
* arm-tdep.c:
	* ia64-tdep.c:
	* i386-tdep.c:
	* hpread.c:
	* hppa-tdep.c:
	* hppa-hpux-tdep.c:
	* gnu-nat.c:
	* gdbtypes.c:
	* gdbarch.h:
	* gdbarch.c:
	* eval.c:
	* dwarf2read.c:
	* dbxread.c:
	* copying:
	* symfile.c:
	* stabsread.c:
	* sh64-tdep.c:
	* sh-tdep.c:
	* s390-tdep.c:
	* rs6000-tdep.c:
	* remote.c:
	* remote-mips.c:
	* mips-tdep.c:
	* mdebugread.c:
	* linux-nat.c:
	* infrun.c:
	* xcoffread.c:
	* win32-nat.c:
	* valops.c:
	* utils.c:
	* tracepoint.c:
	* target.c:
	* symtab.c:
	* c-exp.y:
	* ada-valprint.c:
	* ada-typeprint.c:
	* ada-lex.l:
	* ada-lang.h:
	* ada-lang.c:
	* ada-exp.y:
	* alphafbsd-tdep.c:
	* alphabsd-tdep.h:
	* alphabsd-tdep.c:
	* alphabsd-nat.c:
	* alpha-tdep.h:
	* alpha-tdep.c:
	* alpha-osf1-tdep.c:
	* alpha-nat.c:
	* alpha-mdebug-tdep.c:
	* alpha-linux-tdep.c:
	* alpha-linux-nat.c:
	* aix-thread.c:
	* abug-rom.c:
	* arch-utils.c:
	* annotate.h:
	* annotate.c:
	* amd64obsd-tdep.c:
	* amd64obsd-nat.c:
	* amd64nbsd-tdep.c:
	* amd64nbsd-nat.c:
	* amd64fbsd-tdep.c:
	* amd64fbsd-nat.c:
	* amd64bsd-nat.c:
	* amd64-tdep.h:
	* amd64-tdep.c:
	* amd64-sol2-tdep.c:
	* amd64-nat.h:
	* amd64-nat.c:
	* amd64-linux-tdep.c:
	* amd64-linux-nat.c:
	* alphanbsd-tdep.c:
	* block.h:
	* block.c:
	* bfd-target.h:
	* bfd-target.c:
	* bcache.h:
	* bcache.c:
	* ax.h:
	* ax-general.c:
	* ax-gdb.h:
	* ax-gdb.c:
	* avr-tdep.c:
	* auxv.h:
	* auxv.c:
	* armnbsd-tdep.c:
	* armnbsd-nat.c:
	* arm-tdep.h:
	* arm-linux-nat.c:
	* arch-utils.h:
	* charset.c:
	* call-cmds.h:
	* c-valprint.c:
	* c-typeprint.c:
	* c-lang.h:
	* c-lang.c:
	* buildsym.h:
	* buildsym.c:
	* bsd-uthread.h:
	* bsd-uthread.c:
	* bsd-kvm.h:
	* bsd-kvm.c:
	* breakpoint.h:
	* core-regset.c:
	* core-aout.c:
	* completer.h:
	* completer.c:
	* complaints.h:
	* complaints.c:
	* command.h:
	* coffread.c:
	* coff-solib.h:
	* coff-solib.c:
	* coff-pe-read.h:
	* coff-pe-read.c:
	* cli-out.h:
	* cli-out.c:
	* charset.h:
	* dink32-rom.c:
	* dictionary.h:
	* dictionary.c:
	* demangle.c:
	* defs.h:
	* dcache.h:
	* dcache.c:
	* d10v-tdep.c:
	* cpu32bug-rom.c:
	* cp-valprint.c:
	* cp-support.h:
	* cp-support.c:
	* cp-namespace.c:
	* cp-abi.h:
	* cp-abi.c:
	* corelow.c:
	* corefile.c:
	* environ.c:
	* elfread.c:
	* dwarfread.c:
	* dwarf2loc.c:
	* dwarf2expr.h:
	* dwarf2expr.c:
	* dwarf2-frame.h:
	* dwarf2-frame.c:
	* dve3900-rom.c:
	* dummy-frame.h:
	* dummy-frame.c:
	* dsrec.c:
	* doublest.h:
	* doublest.c:
	* disasm.h:
	* disasm.c:
	* fork-child.c:
	* findvar.c:
	* fbsd-nat.h:
	* fbsd-nat.c:
	* f-valprint.c:
	* f-typeprint.c:
	* f-lang.h:
	* f-lang.c:
	* expression.h:
	* expprint.c:
	* exec.h:
	* exec.c:
	* exceptions.h:
	* exceptions.c:
	* event-top.h:
	* event-top.c:
	* event-loop.h:
	* event-loop.c:
	* gdb.c:
	* gdb-stabs.h:
	* gdb-events.h:
	* gdb-events.c:
	* gcore.c:
	* frv-tdep.h:
	* frv-tdep.c:
	* frv-linux-tdep.c:
	* frame.h:
	* frame.c:
	* frame-unwind.h:
	* frame-unwind.c:
	* frame-base.h:
	* frame-base.c:
	* gdb_vfork.h:
	* gdb_thread_db.h:
	* gdb_string.h:
	* gdb_stat.h:
	* gdb_regex.h:
	* gdb_ptrace.h:
	* gdb_proc_service.h:
	* gdb_obstack.h:
	* gdb_locale.h:
	* gdb_dirent.h:
	* gdb_curses.h:
	* gdb_assert.h:
	* gdbarch.sh:
	* gdb.h:
	* hpux-thread.c:
	* hppabsd-nat.c:
	* hppa-tdep.h:
	* hpacc-abi.c:
	* h8300-tdep.c:
	* gregset.h:
	* go32-nat.c:
	* gnu-v3-abi.c:
	* gnu-v2-abi.h:
	* gnu-v2-abi.c:
	* gnu-nat.h:
	* glibc-tdep.c:
	* gdbtypes.h:
	* gdbcore.h:
	* gdbcmd.h:
	* i386nbsd-tdep.c:
	* i386nbsd-nat.c:
	* i386gnu-tdep.c:
	* i386gnu-nat.c:
	* i386fbsd-tdep.c:
	* i386fbsd-nat.c:
	* i386bsd-tdep.c:
	* i386bsd-nat.h:
	* i386bsd-nat.c:
	* i386-tdep.h:
	* i386-sol2-nat.c:
	* i386-nto-tdep.c:
	* i386-nat.c:
	* i386-linux-tdep.h:
	* i386-linux-tdep.c:
	* i386-linux-nat.c:
	* i386-cygwin-tdep.c:
	* inf-ttrace.c:
	* inf-ptrace.h:
	* inf-ptrace.c:
	* inf-loop.h:
	* inf-loop.c:
	* inf-child.h:
	* inf-child.c:
	* ia64-tdep.h:
	* ia64-linux-nat.c:
	* i387-tdep.h:
	* i387-tdep.c:
	* i386v4-nat.c:
	* i386v-nat.c:
	* i386obsd-tdep.c:
	* i386obsd-nat.c:
	* kod.c:
	* jv-valprint.c:
	* jv-typeprint.c:
	* jv-lang.h:
	* jv-lang.c:
	* irix5-nat.c:
	* iq2000-tdep.c:
	* interps.h:
	* interps.c:
	* inftarg.c:
	* inflow.h:
	* inflow.c:
	* inferior.h:
	* infcmd.c:
	* infcall.h:
	* infcall.c:
	* inf-ttrace.h:
	* m32r-tdep.h:
	* m32r-tdep.c:
	* m32r-rom.c:
	* m32r-linux-tdep.c:
	* m32r-linux-nat.c:
	* m2-valprint.c:
	* m2-typeprint.c:
	* m2-lang.h:
	* m2-lang.c:
	* lynx-nat.c:
	* linux-thread-db.c:
	* linux-nat.h:
	* linespec.c:
	* libunwind-frame.h:
	* libunwind-frame.c:
	* language.h:
	* language.c:
	* macroexp.c:
	* macrocmd.c:
	* m88kbsd-nat.c:
	* m88k-tdep.h:
	* m88k-tdep.c:
	* m68klinux-tdep.c:
	* m68klinux-nat.c:
	* m68kbsd-tdep.c:
	* m68kbsd-nat.c:
	* m68k-tdep.h:
	* m68k-tdep.c:
	* mips-linux-nat.c:
	* mips-irix-tdep.c:
	* minsyms.c:
	* memattr.h:
	* memattr.c:
	* mem-break.c:
	* mdebugread.h:
	* main.h:
	* main.c:
	* macrotab.h:
	* macrotab.c:
	* macroscope.h:
	* macroscope.c:
	* macroexp.h:
	* nbsd-tdep.c:
	* mt-tdep.c:
	* monitor.h:
	* monitor.c:
	* mn10300-tdep.h:
	* mn10300-tdep.c:
	* mn10300-linux-tdep.c:
	* mipsv4-nat.c:
	* mipsread.c:
	* mipsnbsd-tdep.h:
	* mipsnbsd-tdep.c:
	* mipsnbsd-nat.c:
	* mips64obsd-tdep.c:
	* mips64obsd-nat.c:
	* mips-tdep.h:
	* mips-mdebug-tdep.c:
	* mips-linux-tdep.c:
	* osabi.h:
	* osabi.c:
	* ocd.h:
	* ocd.c:
	* observer.c:
	* objfiles.h:
	* objfiles.c:
	* objc-lang.h:
	* objc-lang.c:
	* objc-exp.y:
	* nto-tdep.h:
	* nto-tdep.c:
	* nto-procfs.c:
	* nlmread.c:
	* nbsd-tdep.h:
	* ppcobsd-tdep.c:
	* ppcobsd-nat.c:
	* ppcnbsd-tdep.h:
	* ppcnbsd-tdep.c:
	* ppcnbsd-nat.c:
	* ppcbug-rom.c:
	* ppc-tdep.h:
	* ppc-sysv-tdep.c:
	* ppc-linux-tdep.c:
	* ppc-linux-nat.c:
	* ppc-bdm.c:
	* parser-defs.h:
	* parse.c:
	* p-valprint.c:
	* p-typeprint.c:
	* p-lang.h:
	* p-lang.c:
	* remote-fileio.h:
	* remote-fileio.c:
	* remote-est.c:
	* remote-e7000.c:
	* regset.h:
	* regset.c:
	* reggroups.h:
	* reggroups.c:
	* regcache.h:
	* regcache.c:
	* proc-why.c:
	* proc-service.c:
	* proc-events.c:
	* printcmd.c:
	* ppcobsd-tdep.h:
	* sentinel-frame.h:
	* sentinel-frame.c:
	* scm-valprint.c:
	* scm-tags.h:
	* scm-lang.h:
	* scm-lang.c:
	* scm-exp.c:
	* s390-tdep.h:
	* rom68k-rom.c:
	* remote.h:
	* remote-utils.c:
	* remote-st.c:
	* remote-sim.c:
	* remote-sds.c:
	* remote-rdp.c:
	* remote-rdi.c:
	* remote-hms.c:
	* sim-regno.h:
	* shnbsd-tdep.h:
	* shnbsd-tdep.c:
	* shnbsd-nat.c:
	* sh-tdep.h:
	* serial.h:
	* serial.c:
	* ser-unix.h:
	* ser-unix.c:
	* ser-tcp.c:
	* ser-pipe.c:
	* ser-go32.c:
	* ser-e7kpc.c:
	* ser-base.h:
	* ser-base.c:
	* solib.c:
	* solib-svr4.h:
	* solib-svr4.c:
	* solib-sunos.c:
	* solib-som.h:
	* solib-som.c:
	* solib-pa64.h:
	* solib-pa64.c:
	* solib-osf.c:
	* solib-null.c:
	* solib-legacy.c:
	* solib-irix.c:
	* solib-frv.c:
	* solib-aix5.c:
	* sol-thread.c:
	* sparc64-linux-tdep.c:
	* sparc64-linux-nat.c:
	* sparc-tdep.h:
	* sparc-tdep.c:
	* sparc-sol2-tdep.c:
	* sparc-sol2-nat.c:
	* sparc-nat.h:
	* sparc-nat.c:
	* sparc-linux-tdep.c:
	* sparc-linux-nat.c:
	* source.h:
	* source.c:
	* somread.c:
	* solist.h:
	* solib.h:
	* std-regs.c:
	* stack.h:
	* stack.c:
	* stabsread.h:
	* sparcobsd-tdep.c:
	* sparcnbsd-tdep.c:
	* sparcnbsd-nat.c:
	* sparc64obsd-tdep.c:
	* sparc64nbsd-tdep.c:
	* sparc64nbsd-nat.c:
	* sparc64fbsd-tdep.c:
	* sparc64fbsd-nat.c:
	* sparc64-tdep.h:
	* sparc64-tdep.c:
	* sparc64-sol2-tdep.c:
	* sparc64-nat.c:
	* ui-file.c:
	* typeprint.h:
	* typeprint.c:
	* tramp-frame.h:
	* tramp-frame.c:
	* trad-frame.h:
	* trad-frame.c:
	* tracepoint.h:
	* top.c:
	* tobs.inc:
	* thread.c:
	* terminal.h:
	* target.h:
	* symfile.h:
	* stop-gdb.c:
	* vaxbsd-nat.c:
	* vax-tdep.h:
	* vax-tdep.c:
	* vax-nat.c:
	* varobj.h:
	* varobj.c:
	* value.h:
	* value.c:
	* valprint.h:
	* valprint.c:
	* v850-tdep.c:
	* uw-thread.c:
	* user-regs.c:
	* ui-out.h:
	* ui-out.c:
	* ui-file.h:
	* xcoffsolib.h:
	* xcoffsolib.c:
	* wrapper.c:
	* wince.c:
	* wince-stub.h:
	* wince-stub.c:
	* vaxobsd-tdep.c:
	* vaxnbsd-tdep.c:
	* gdb_gcore.sh:
	* copying.c:
	* configure.ac:
	* aclocal.m4:
	* acinclude.m4:
	* reply_mig_hack.awk:
	* observer.sh:
	* gdb_mbuild.sh:
	* arm-linux-tdep.c:
	* blockframe.c:
	* dbug-rom.c:
	* environ.h:
	* dwarf2loc.h:
	* gdb-events.sh:
	* glibc-tdep.h:
	* gdb_wait.h:
	* gdbthread.h:
	* i386-sol2-tdep.c:
	* hppabsd-tdep.c:
	* hppa-linux-nat.c:
	* hppa-hpux-nat.c:
	* ia64-linux-tdep.c:
	* infptrace.c:
	* linespec.h:
	* maint.c:
	* mips-mdebug-tdep.h:
	* remote-m32r-sdi.c:
	* s390-nat.c:
	* rs6000-nat.c:
	* remote-utils.h:
	* sh3-rom.c:
	* sh-linux-tdep.c:
	* top.h:
	* symtab.h:
	* symmisc.c:
	* symfile-mem.c:
	* srec.h:
	* user-regs.h:
	* version.h:
	* valarith.c:
	* xstormy16-tdep.c:
	* wrapper.h:
	* Makefile.in:
	* f-exp.y:
	* cris-tdep.c:
	* cp-name-parser.y:
	* procfs.c:
	* proc-utils.h:
	* proc-flags.c:
	* proc-api.c:
	* p-exp.y:
	* m68hc11-tdep.c:
	* m2-exp.y:
	* kod.h:
	* kod-cisco.c:
	* jv-exp.y:
	* hppa-linux-tdep.c: Add (c) after Copyright.  Update the FSF
	address.
2005-12-17 22:34:03 +00:00
Nick Roberts 3ca42dbe77 * annotate.c (breakpoints_changed, annotate_frames_invalid)
(_initialize_annotate): Print breakpoints-invalid and
frames-invalid for level 2 annotations only.

* gdb.base/annota3.exp, gdb.cp/annota3.exp: The annotations
frames-invalid and breakpoints-invalid are no longer generated
with level 3 so don't expect them in the output.
2005-09-28 23:44:02 +00:00
Andrew Cagney 66bf4b3a03 2005-02-14 Andrew Cagney <cagney@gnu.org>
* utils.c (paddress): New function.
	* defs.h (paddress): Declare.
	* printcmd.c (deprecated_print_address_numeric): Rename
	print_address_numeric, call paddress.
	* valprint.c, ui-out.c, tui/tui-stack.c, tracepoint.c: Update.
	* symmisc.c, symfile.c stack.c, p-valprint.c, printcmd.c: Update.
	* maint.c, m32r-rom.c, infcmd.c, f-valprint.c, exec.c: Update.
	* dwarf2read.c, dve3900-rom.c, defs.h, c-valprint.c: Update.
	* corefile.c, cli/cli-cmds.c, breakpoint.c, annotate.c: Update.
	* ada-valprint.c: Update.
2005-02-14 14:37:38 +00:00
Andrew Cagney a3f171870f 2005-02-11 Andrew Cagney <cagney@gnu.org>
Mark up some of printf_filtered and printf_unfiltered.
	* ada-lang.c, annotate.c, arch-utils.c, breakpoint.c: Update.
	* corelow.c, cp-namespace.c, cp-support.c, dcache.c: Update.
	* demangle.c, dsrec.c, dwarf2read.c, dwarfread.c: Update.
	* event-loop.c, event-top.c, exec.c, f-valprint.c: Update.
	* gdbtypes.c, inf-loop.c, inf-ptrace.c, inf-ttrace.c: Update.
	* infcmd.c, inflow.c, infrun.c, inftarg.c, language.c: Update.
	* linespec.c, linux-nat.c, linux-thread-db.c, maint.c: Update.
	* mdebugread.c, memattr.c, monitor.c, objc-lang.c: Update.
	* ocd.c, osabi.c, printcmd.c, procfs.c, regcache.c: Update.
	* remote.c, solib-som.c, solib.c, somsolib.c, source.c: Update.
	* stack.c, symfile.c, symmisc.c, target.c, thread.c: Update.
	* top.c, utils.c, valprint.c, value.c, cli/cli-cmds.c: Update.
	* cli/cli-dump.c, cli/cli-logging.c, tui/tui-hooks.c: Update.
	* tui/tui-regs.c, tui/tui-win.c: Update.
2005-02-12 00:39:24 +00:00
Andrew Cagney 9a4105ab85 2004-04-21 Andrew Cagney <cagney@redhat.com>
* annotate.h (deprecated_annotate_starting_hook)
	(deprecated_annotate_stopped_hook)
	(deprecated_annotate_exited_hook)
	(deprecated_annotate_signal_hook)
	(deprecated_annotate_signalled_hook): Deprecate.
	* tracepoint.h (deprecated_create_tracepoint_hook)
	(deprecated_delete_tracepoint_hook)
	(deprecated_modify_tracepoint_hook)
	(deprecated_trace_find_hook)
	(deprecated_trace_start_stop_hook): Deprecate.
	* target.h (deprecated_target_new_objfile_hook): Deprecate.
	* remote.h (deprecated_target_resume_hook)
	(deprecated_target_wait_loop_hook): Deprecate.
	* gdbcore.h (deprecated_exec_file_display_hook)
	(deprecated_file_changed_hook): Deprecate.
	* frame.h (deprecated_selected_frame_level_changed_hook): Deprecate.
	* defs.h (deprecated_modify_breakpoint_hook)
	(deprecated_command_loop_hook, deprecated_show_load_progress)
	(deprecated_print_frame_info_listing_hook)
	(deprecated_query_hook, deprecated_warning_hook)
	(deprecated_flush_hook, deprecated_create_breakpoint_hook)
	(deprecated_delete_breakpoint_hook)
	(deprecated_interactive_hook, deprecated_registers_changed_hook)
	(deprecated_readline_begin_hook, deprecated_readline_hook)
	(deprecated_readline_end_hook, deprecated_register_changed_hook)
	(deprecated_memory_changed_hook, deprecated_init_ui_hook)
	(deprecated_context_hook, deprecated_target_wait_hook)
	(deprecated_attach_hook, deprecated_detach_hook)
	(deprecated_call_command_hook, deprecated_set_hook)
	(deprecated_error_hook, deprecated_error_begin_hook)
	(deprecated_ui_load_progress_hook): Deprecate.
	* valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update.
	* tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update.
	* target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update.
	* remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update.
	* main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update.
	* exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update.
	* cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update.
	* annotate.c, aix-thread.c: Update.
2004-04-21 23:52:21 +00:00
Andrew Cagney e5c113a1de 2003-07-28 Andrew Cagney <cagney@redhat.com>
* annotate.c (annotate_breakpoints_headers): Restrict annotation
	to level 2.
	(annotate_breakpoints_table, annotate_record): Ditto.
	(annotate_breakpoints_table_end, annotate_field_begin): Ditto.
	(annotate_field_name_end, annotate_field_value): Ditto.
	(annotate_field_end, annotate_frame_source_begin): Ditto.
	(annotate_frame_source_file, annotate_frame_source_file_end): Ditto.
	(annotate_frame_source_line, annotate_frame_source_end): Ditto.
	(annotate_frame_begin, annotate_frame_function_name): Ditto.
	(annotate_frame_address_end, annotate_frame_address): Ditto.
	(annotate_frame_args, annotate_frame_end): Ditto.
	(annotate_frame_where, annotate_arg_begin): Ditto.
	(annotate_arg_name_end, annotate_arg_value): Ditto.
	(annotate_arg_end, annotate_signal_handler_caller): Ditto.
	(annotate_function_call, annotate_signal_name): Ditto.
	(annotate_signal_string, annotate_signal_name_end): Ditto.
	(annotate_signal_string_end, annotate_value_history_begin): Ditto.
	(annotate_value_begin, annotate_value_history_value): Ditto.
	(annotate_value_history_end, annotate_value_end): Ditto.
	(annotate_display_begin, annotate_display_number_end): Ditto.
	(annotate_display_format, annotate_display_expression): Ditto.
	(annotate_display_expression_end, annotate_display_value): Ditto.
	(annotate_display_end, annotate_array_section_begin): Ditto.
	(annotate_elt_rep, annotate_elt_rep_end): Ditto.
	(annotate_elt, annotate_array_section_end): Ditto.
2003-07-29 03:17:08 +00:00
Kevin Buettner b6ba6518e9 Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
Kevin Buettner fba45db2fa Protoization. 2000-07-30 01:48:28 +00:00
Kevin Buettner 507f3c78fb Eliminate PARAMS from function pointer declarations. 2000-06-04 00:41:10 +00:00
Kevin Buettner a14ed312fd PARAMS removal. 2000-05-28 01:12:42 +00:00
Jason Molenda 5c44784c11 import gdb-1999-11-01 snapshot 1999-11-02 04:44:47 +00:00
Jason Molenda c5aa993b1f import gdb-1999-07-07 post reformat 1999-07-07 20:19:36 +00:00
Jason Molenda 392a587b05 import gdb-1999-05-25 snapshot 1999-05-25 18:09:09 +00:00
Stan Shebs 7a292a7adf import gdb-19990422 snapshot 1999-04-26 18:34:20 +00:00
Stan Shebs c906108c21 Initial creation of sourceware repository 1999-04-16 01:35:26 +00:00
Stan Shebs 071ea11e85 Initial creation of sourceware repository 1999-04-16 01:34:07 +00:00
David Taylor 4770ff087a Start of HP merge changes to GDB. 1998-12-10 21:25:43 +00:00
Jason Molenda 879c041771 1998-10-14 Jason Molenda (jsm@bugshack.cygnus.com)
* defs.h: Move _initialize_printcmd, _initialize_stack,
        _initialize_blockframe out of here and in to their respective .c files.
        * blockframe.c: Move _initialize_blockframe prototype to here.
        * printcmd.c: Move _initialize_printcmd prototype to here.
        * stack.c: Move _initialize_stack prototype to here.

        * source.c, symtab.h: Move _initialize_source prototype to the .c file.
        * values.c, value.h: Move _initialize_values prototype to the .c file.
        * gdbthread.h, thread.c: Move _initialize_thread prototype to the .c
        file.
        * breakpoint.c, breakpoint.h: Move _initialize_breakpoint prototype
        to the .c file.

        * abug-rom.c alpha-nat.c alpha-tdep.c annotate.c ax-gdb.c bcache.c:
        Standardize comments for the prototype section of these files.

        * configure.in: Look in libc for wctype before looking for it in libc.

The last one is to fix the GNU ld (~2.9.1) + Solaris 2.6 interaction problem
where an empty stub library (libw) causes a core dump when we call vasprintf
(e.g. `info br') in the final linked gdb.
1998-10-14 23:44:13 +00:00
Elena Zannoni 929db6e5e2 Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
merged changes from Foundry (list follows by file/author):

        - Tom Tromey  <tromey@cygnus.com>
        * Makefile.in (gdbres.o): New target.
        (WINDRES): New define.
        * configure: Rebuilt.
        * configure.in (WINDRES): Define.
        (CONFIG_OBS): Include gdbres.o on Windows.
        * gdbtool.ico: New file.
        * gdb.rc: New file.

        * ser-unix.c
        - Keith Seitz  <keiths@onions.cygnus.com>
        (wait_for): Don't reset the timeout_remaining for CYGWIN32,
        since we now effectively poll the serial port.
        Don't reset the current_timeout, either, since this member is used
        by hardwire_readchar to track the timeout and call the ui_loop_hook.
        (hardwire_readchar): Poll the serial port for Cygwin32. We timeout every
        second, update the UI, and loop around doing this until we have hit the real
        timeout or we get data or an error. This will allow the UI to stay active
        while gdb is "blocked" talking to the target.
        - Martin M. Hunt  <hunt@cygnus.com>
        (wait_for): Do reset current_timeout
        because it is only used to keep track of what the
        current timeout for the scb is.

        * top.c
        - Martin M. Hunt  <hunt@cygnus.com>
        (quit_confirm): Change exit message again
        for GUI.
        (pc_changed_hook): Add prototype.
        - Tom Tromey  <tromey@cygnus.com>
        (quit_confirm): Added missing `else'.
        (quit_confirm): Special-case message if init_ui_hook is
        set.

        * symtab.c
        - Martin M. Hunt  <hunt@cygnus.com>
        (find_pc_sect_line): If no symbol information
        is found, return correct pc anyway.
        (find_methods): Comment out an apparently
        bogus error message because it messes up Foundry.

        * serial.c
        - Martin M. Hunt  <hunt@cygnus.com>
        (_initialize_serial): Add a description of
        "set remotelogbase".

        * findvar.c
        - Martin M. Hunt  <hunt@cygnus.com>
        (write_register_gen): Add call to
        pc_changed_hook if the PC is being changed.

        * defs.h
        - Martin M. Hunt  <hunt@cygnus.com>
        (pc_changed_hook): Define.

        * command.c
        -  Martin M. Hunt  <hunt@cygnus.com>
        (do_setshow_command): If no arguments are supplied,
        don't dump core, instead print out an error message.

        * breakpoint.c
        - Martin M. Hunt  <hunt@cygnus.com>
        Make set_raw_breakpoint, set_breakpoint_count,
        and breakpoint_count non-static so they are accessible from
        gdbtk.c.
        (enable_breakpoint): Enable breakpoint
        with same disposition instead of changing all breakpoints
        to donttouch.

        * annotate.h
	- Keith Seitz  <keiths@onions.cygnus.com>
        Add declarations for annotation hooks.

        * annotate.c
	- Keith Seitz  <keiths@onions.cygnus.com>
        Add hooks: annotate_starting_hook, annotate_stopped_hook,
        annotate_signalled_hook, annotate_exited_hook.
        (annotate_starting): If hook exists, call it instead.
        (annotate_stopped): If hook exists, call it instead.
        (annotate_exited): If hook exists, call it instead.
        (annotate_signalled): If hook exists, call it instead.

Sat Mar 21 19:34:49 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	Merged changes from Foundry: list follows by author:

	- Tom Tromey  <tromey@cygnus.com>

	* Makefile.in (gdbres.o): New target.
	(WINDRES): New define.
	* configure: Rebuilt.
	* configure.in (WINDRES): Define.
	(CONFIG_OBS): Include gdbres.o on Windows.
	* gdbtool.ico: New file.
	* gdb.rc: New file.
        * gdbtk.c (gdbtk_init): Call ide_create_messagebox_command.
	(gdbtk_cleanup): Call ide_interface_deregister_all.
	(gdbtk_init): Pass event handle to cleanup.
	(TclDebug): Use Tcl_Merge to construct command.
	(gdbtk_init): Call ide_create_cygwin_path_command.

        - Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdb_set_bp): Set addr_string for bp.
	(gdb_get_breakpoint_info): Demangle function
	names in breakpoint info.
	Include "demangle.h".
	(gdb_loc, gdb_listfuncs): Demangle C++
	function names.
	(gdb_set_bp): Properly quote filename to fix
	problems with spaces. Send pc back as a hex string.
	(gdb_listfuncs): Remove debugging line.
	 Turn off some debugging lines.
 	(breakpoint_notify): Return correct line number.
	(gdb_get_breakpoint_info): Return correct line number.
	(gdb_set_bp): New function to provide a better way to
	set breakpoints.
	(gdbtk_readline, gdbtk_readline_begin): Memory
	allocated by tcl needs to be freed by Tcl_Free().
	(find_file_in_dir): Deleted.
	(gdb_find_file_command): Call full_lookup_symtab().
	(gdb_listfuncs): Call full_lookup_symtab().
	(full_lookup_symtab): New function.  Like lookup_symtab
	except handles multiple files with the same basename,
	full pathnames, and always sets symtab->fullname.
	(gdb_loadfile): Call full_lookup_symtab(). Clear
	realloc'd memory.
	(gdb_loadfile):  Don't tag lines without source.
	Tag source lines with source_tag.
	(gdb_find_file_command, find_file_in_dir):
 	Rewrite.  Now searches symtabs and psymtabs for a match
	on the partial or full filename.  Returns the full pathname.
	(gdb_loadfile): Realloc additional memory
	if someone loads in a file with more than 160,000
	lines.  I don't know if this really works because
	I don't have enough memory to test it.
	(gdb_sourcelines): Deleted.
	(gdb_loadfile): New function. Takes a text widget
	and loads it with the contents of a file.  Marks
	and tags source lines.
	(pc_changed): New function.
	(get_pc_register): Returns the value of
	the PC to GDB.
	(gdb_loc): If looking on the stack, return
	real pc along with calling source line.
	(gdb_loc): Return "" instead of "N/A" if
	filename is not found.
	(gdb_get_breakpoint_info): Same.
	(get_register): For Natural mode, set format to 0.
	 Minor bugfixes from keiths.
	(TclDebug): New function for debugging use.
	(gdb_loc): Return correct PC for frames
	that are not the innermost frame.
	(gdb_listfiles): Rewritten to use object
	API.  Now takes an optional dirname which will cause
	only files in that directory or its subdirectories
	to be returned.  Now returns basenames instead of
	full pathnames.
	(gdb_cmd): Set/reset load_in_progress flag.
	(call_wrapper): Don't pop up dialog for errors in
	downloads; just abort download.
	(gdbtk_load_hash): Set return value correctly.

        -  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c (gdbtk_init): Define the ui_loop_hook so that it can be
	called by routines which might block, allowing us to update the GUI.
	(gdbtk_wait): Move timer calls to annotation hooks.
	(gdbtk_init): Define the annotation hooks.
	(gdbtk_annotate_starting): New function for cygwin32 hosts.
	(gdbtk_annotate_stopped): New function for cygwin32 hosts.
	(gdbtk_annotate_exited): New function for cygwin32 hosts.
	(gdbtk_annotate_signalled): New function. for cygwin32 hosts.
	(gdbtk_init): Use gdbtk_print_frame_info hook.
	(gdbtk_print_frame_info): New function which sets current_source_symtab
	based on the given symtab and line info.
	(gdb_immediate_command): New function which does
	not buffer any
	output. (Contrast to gdb_cmd.)
	(gdb_prompt_command): New function to return gdb's prompt.
	(find_file_in_dir): New functon which searches source paths
	for a given filename.
	(gdb_find_file): New function which returns path to given file -- uses
	find_file_in_dir.
	(gdbtk_init): Install "gdb_immediate", "gdb_find_file", and
	"gdb_prompt"
 	commands into interpreter.

        -  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c (gdbtk_timer_going): If __CYGWIN32__, new static
	variable.
	(gdb_cmd): If __CYGWIN32__, if executing the load command, call
	gdbtk_start_timer and gdbtk_stop_timer.
	(call_wrapper): If __CYGWIN32__, if the timer is going, turn it
	off.  Clear load_in_progress.
	(x_event): If load_in_progress, quit if download_cancel_ok.
	(gdbtk_start_timer): Set gdbtk_timer_going.
	(gdbtk_stop_timer): Clear gdbtk_timer_going.
	(gdbtk_wait): Call x_event.
	(gdbtk_init): Call ide_create_win_grab_command if
	__CYGIN32__.
	(gdb_clear_file): Clear stop_pc.
1998-03-22 23:02:10 +00:00
Fred Fish b607efe714 See gdb ChangeLog entry with header:
Thu Jul 25 19:41:31 1996  Fred Fish  <fnf@cygnus.com>

for a rather huge set of changes.  I was going to put them here, but it
made cvs dump core.  :-(
1996-07-26 03:01:51 +00:00
Peter Schauer 2e11fdd8f8 * annotate.c (annotate_source, annotate_frame_begin): Issue
`0x' prefix for the pc value, to remain consistent with previous
	GDB versions.

	* blockframe.c (find_pc_partial_function), config/pa/tm-hppa.h:
	Remove Sun shared library transfer hack and
	INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK, it is obsoleted by the
	mst_solib_trampoline minimal symbols.

	* blockframe.c (inside_main_func):  Check main_func_*pc against
	INVALID_ENTRY_*PC, not zero.
	* symfile.c (init_entry_point_info):  Initialize ei.*pc with
	INVALID_ENTRY_*PC.
	* mipsread.c (mipscoff_symfile_read):  If the entry_file bounds
	are still unknown after processing the partial symbols, then try
	to set them from the minimal symbols.

	* infcmd.c (registers_info):  Error out if selected_frame is NULL.
	* stack.c (return_command):  Select new current frame silently if
	not interactive.

	* mipsread.c (read_alphacoff_dynamic_symtab):  Ignore additional
	DT_MIPS_LOCAL_GOTNO and DT_MIPS_GOTSYM entries.

	* irix5-nat.c (solib_create_inferior_hook):  Call solib_add only
	if auto_solib_add_at_startup is nonzero.
	(_initialize_solib):  Add "set auto-solib-add" command.
	* osfsolib.c (solib_create_inferior_hook):  Call solib_add only
	if auto_solib_add_at_startup is nonzero.
	(_initialize_solib):  Add "set auto-solib-add" command.
1995-11-18 12:19:25 +00:00
Fred Fish 6c9638b444 Update FSF address. 1995-08-02 03:41:12 +00:00
Stu Grossman 6131622e34 * annotate.c, breakpoint.c, defs.h, gdbtk.c, top.c: Replace
enable/disable_breakpoint_hook with modify_breakpoint_hook.
	* gdbtk.c:  General cleanups, get rid of unused variables.  Redo
	handling of stdout/stderr to just return output as the result of
	the tcl command that caused the output.  Cleanup -Wall stuff.
	* (breakpoint_notify):  Now returns just action and breakpoint
	number.
	* (gdb_get_breakpoint_list):  New routine.  Does the obvious.
	* (gdb_get_breakpoint_info):  Mostly derived from the old
	breakpoint_notify, but returns lots more info.
	* (dsprintf_append_element):  Helper routine, works like printf,
	but appends a tcl element onto the specified DString.  Good for
	building up lists as return values.
	* (gdbtk_enable/disable_breakpoint):  Go away.  Replaced with
	gdbtk_modify_breakpoint.
	* (*many routines*):  Use new result protocol.
	* (call_wrapper):  Make sure that recursive calls don't trash results.
	* gdbtk.tcl:  New windows, autocmd, and breakpoints.
	* (gdbtk_tcl_fputs):  Don't use $current_output_win redirection
	anymore.  It's not needed (in fact, this routine may not be needed
	anymore).
	* (gdbtk_tcl_breakpoint):  Change to reflect new breakpoint
	notification protocol.
	* (gdbtk_tcl_busy gdbtk_tcl_idle):  Straighten out buttons, remove
	catches.
	* (interactive_cmd):  Use this wrapper around button invocations
	of many commands.  This will catch errors and put the results into
	the command window.  It also updates all the other windows.
	* Also, change reliefs of most things to sunken.  This actually
	looks better.
	* (create_file_win):  Fix margin binding to allow breakpoints to
	work again.
	* (create_asm_win):  Use return value of gdb_disassemble instead
	of implicit I/O to the command window.
	* (create_command_window):  Use new result protocol to get output
	from commands.
1995-02-15 01:45:39 +00:00
Jim Kingdon 5024a43fee * infrun.c (proceed): Flush stdout before resuming inferior.
* infcmd.c (step_1), annotate.c (annotate_starting):
	Don't bother to flush here.
1995-01-25 18:16:42 +00:00
Jim Kingdon 0c070b5769 * annotate.c (annotate_starting): Flush output. 1994-08-29 18:45:35 +00:00
Jean Marie Diaz d2a85f11be * breakpoint.c (mention), main.c (fputs_unfiltered): Add comments.
* breakpoint.c (delete_breakpoint, enable_breakpoint,
	disable_breakpoint): Don't call breakpoints_changed; it is now
	called via the *_breakpoint_hook functions.
	* annotate.c (_initialize_annotate, breakpoint_changed): New functions.
1994-08-02 00:44:24 +00:00
Jim Kingdon 20b3c1aae5 * breakpoint.c (breakpoint_1): Fix typo.
* annotate.c (annotate_field_end): Fix typo.

	* Makefile.in: Move annotate.o from COMMON_OBS to OBS.

	* Makefile.in (TSSTART): Remove; no longer used.
1994-05-18 00:59:15 +00:00