This is a minor refactoring that converts the return type of
jit_read_descriptor and jit_breakpoint_re_set_internal functions
from 'int' to 'bool'.
The return value logic of jit_breakpoint_re_set_internal has been
reversed. With this patch it now returns true if the jit breakpoint
has been successfully initialized.
gdb/ChangeLog:
2020-06-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* jit.c (jit_read_descriptor): Use bool as the return type.
(jit_breakpoint_re_set_internal): Use bool as the return type.
Invert the return value logic; return true if the jit breakpoint
has been successfully initialized.
(jit_inferior_init): Update the call to
jit_breakpoint_re_set_internal.
This commit brings support for the DWARF line table is_stmt field to
GDB. The is_stmt field is used by the compiler when a single source
line is split into multiple assembler instructions, especially if the
assembler instructions are interleaved with instruction from other
source lines.
The compiler will set the is_stmt flag false from some instructions
from the source lines, these instructions are not a good place to
insert a breakpoint in order to stop at the source line.
Instructions which are marked with the is_stmt flag true are a good
place to insert a breakpoint for that source line.
Currently GDB ignores all instructions for which is_stmt is false.
This is fine in a lot of cases, however, there are some cases where
this means the debug experience is not as good as it could be.
Consider stopping at a random instruction, currently this instruction
will be attributed to the last line table entry before this point for
which is_stmt was true - as these are the only line table entries that
GDB tracks. This can easily be incorrect in code with even a low
level of optimisation.
With is_stmt tracking in place, when stopping at a random instruction
we now attribute the instruction back to the real source line, even
when is_stmt is false for that instruction in the line table.
When inserting breakpoints we still select line table entries for
which is_stmt is true, so the breakpoint placing behaviour should not
change.
When stepping though code (at the line level, not the instruction
level) we will still stop at instruction where is_stmt is true, I
think this is more likely to be the desired behaviour.
Instruction stepping is, of course, unchanged, stepping one
instruction at a time, but we should now report more accurate line
table information with each instruction step.
The original motivation for this work was a patch posted by Bernd
here:
https://sourceware.org/ml/gdb-patches/2019-11/msg00792.html
As part of that thread it was suggested that many issues would be
resolved if GDB supported line table views, this isn't something I've
attempted in this patch, though reading the spec, it seems like this
would be a useful feature to support in GDB in the future. The spec
is here:
http://dwarfstd.org/ShowIssue.php?issue=170427.1
And Bernd gives a brief description of the benefits here:
https://sourceware.org/ml/gdb-patches/2020-01/msg00147.html
With that all said, I think that there is benefit to having proper
is_stmt support regardless of whether we have views support, so I
think we should consider getting this in first, and then building view
support on top of this.
The gdb.cp/step-and-next-inline.exp test is based off a test proposed
by Bernd Edlinger in this message:
https://sourceware.org/ml/gdb-patches/2019-12/msg00842.html
gdb/ChangeLog:
* buildsym-legacy.c (record_line): Pass extra parameter to
record_line.
* buildsym.c (buildsym_compunit::record_line): Take an extra
parameter, reduce duplication in the line table, and record the
is_stmt flag in the line table.
* buildsym.h (buildsym_compunit::record_line): Add extra
parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Ignore
non-statement lines.
* dwarf2/read.c (dwarf_record_line_1): Add extra parameter, pass
this to the symtab builder.
(dwarf_finish_line): Pass extra parameter to dwarf_record_line_1.
(lnp_state_machine::record_line): Pass a suitable is_stmt flag
through to dwarf_record_line_1.
* infrun.c (process_event_stop_test): When stepping, don't stop at
a non-statement instruction, and only refresh the step info when
we land in the middle of a line's range. Also add an extra
comment.
* jit.c (jit_symtab_line_mapping_add_impl): Initialise is_stmt
field.
* record-btrace.c (btrace_find_line_range): Only record lines
marked as is-statement.
* stack.c (frame_show_address): Show the frame address if we are
in a non-statement sal.
* symmisc.c (dump_symtab_1): Print the is_stmt flag.
(maintenance_print_one_line_table): Print a header for the is_stmt
column, and include is_stmt information in the output.
* symtab.c (find_pc_sect_line): Find lines marked as statements in
preference to non-statements.
(find_pcs_for_symtab_line): Prefer is-statement entries.
(find_line_common): Likewise.
* symtab.h (struct linetable_entry): Add is_stmt field.
(struct symtab_and_line): Likewise.
* xcoffread.c (arrange_linetable): Initialise is_stmt field when
arranging the line table.
gdb/testsuite/ChangeLog:
* gdb.cp/step-and-next-inline.cc: New file.
* gdb.cp/step-and-next-inline.exp: New file.
* gdb.cp/step-and-next-inline.h: New file.
* gdb.dwarf2/dw2-is-stmt.c: New file.
* gdb.dwarf2/dw2-is-stmt.exp: New file.
* gdb.dwarf2/dw2-is-stmt-2.c: New file.
* gdb.dwarf2/dw2-is-stmt-2.exp: New file.
* gdb.dwarf2/dw2-ranges-base.exp: Update line table pattern.
I noticed that gnutarget was not "const". Since writing through this
pointer would probably be a bug, I think it ought to be. This patch
makes the change.
gdb/ChangeLog
2020-03-04 Tom Tromey <tom@tromey.com>
* jit.c (bfd_open_from_target_memory): Make "target" const.
* corefile.c (gnutarget): Now const.
* gdbcore.h (gnutarget): Now const.
This also renames it to make it clearer that this is not a cheap
function (to compute_and_set_names). Also renames name to m_name
to make the implementation of the renamed function more readable.
Most of the places that access sym->m_name directly were also changed
to call linkage_name () instead, to make it clearer which name they
are accessing.
gdb/ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_decode_symbol): Update.
* buildsym.c (add_symbol_to_list): Update.
* coffread.c (process_coff_symbol): Update.
* ctfread.c (ctf_add_enum_member_cb): Update.
(new_symbol): Update.
(ctf_add_var_cb): Update.
* dwarf2read.c (fixup_go_packaging): Update.
(dwarf2_compute_name): Update.
(new_symbol): Update.
* jit.c (finalize_symtab): Update.
* language.c (language_alloc_type_symbol): Update.
* mdebugread.c (new_symbol): Update.
* minsyms.c (minimal_symbol_reader::record_full): Update.
(minimal_symbol_reader::install): Update.
* psymtab.c (print_partial_symbols): Update.
(psymbol_hash): Update.
(psymbol_compare): Update.
(add_psymbol_to_bcache): Update.
(maintenance_check_psymtabs): Update.
* stabsread.c (define_symbol): Update.
* symtab.c (symbol_set_names): Rename to...
(general_symbol_info::compute_and_set_names): ...this.
(general_symbol_info::natural_name): Update.
(general_symbol_info::search_name): Update.
(fixup_section): Update.
* symtab.h (struct general_symbol_info) <name>: Rename to...
<m_name>: ...this.
<compute_and_set_names>: Rename from...
(symbol_set_names): ...this.
(SYMBOL_SET_NAMES): Remove.
(struct symbol) <ctor>: Update.
Change-Id: I8da1f10cab4e0b89f19d5750fa4e6e2ac8d2b24f
This patch changes the gdb_symtab::blocks manually maintained linked
list to be an std::forward_list, simplifying memory management.
Currently, the list is sorted as blocks are created. With an
std::forward_list, it is easier (and probably a bit more efficient) to
sort them once at the end, so this is what I did.
A note about the comment on the "next" field:
/* gdb_blocks are linked into a tree structure. Next points to the
next node at the same depth as this block and parent to the
parent gdb_block. */
I don't think it's true that "next" points to the next node at the same
depth. All nodes are in a simple singly linked list, so necessarily
some node will point to some other node that isn't at the same depth.
gdb/ChangeLog:
* jit.c (struct gdb_block) <next>: Remove field.
(struct gdb_symtab) <~gdb_symtab>: Remove.
<blocks>: Change type to std::forward_list<gdb_block>.
(compare_block): Remove.
(jit_block_open_impl): Adjust to std::forward_list. Place the new
block at the beginning, don't mind about sorting.
(finalize_symtab): Adjust to std::forward_list, sort the blocks list
before using it.
Add a constructor to gdb_block, change the name field to be a
gdb::unique_xmalloc_ptr. This is in preparation for using an
std::forward_list<gdb_block> in the next patch.
gdb/ChangeLog:
* jit.c (struct gdb_block): Add constructor, initialize
real_block and next fields.
<name>: Change type to gdb::unique_xmalloc_ptr.
(struct gdb_symtab) <~gdb_symtab>: Free blocks with delete.
(jit_block_open_impl): Allocate gdb_block with new.
(finalize_symtab): Adjust to gdb::unique_xmalloc_ptr.
Replace the manual linked list with an std::forward_list, simplifying
the memory management. This requires allocating gdb_object with new and
free'ing it with delete.
gdb/ChangeLog:
* jit.c: Include forward_list.
(struct gdb_symtab) <next>: Remove field.
(struct gdb_object) <symtabs>: Change type to
std::forward_list<gdb_symtab>.
(jit_object_open_impl): Allocate gdb_object with new.
(jit_symtab_open_impl): Adjust to std::forward_list.
(finalize_symtab): Don't delete symtab.
(jit_object_close_impl): Adjust to std::forward_list. Free
gdb_object with delete.
This patch makes the gdb_symtab bit more c++y, in preparation for the
next patch that will use an std::forward_list<gdb_symtab>. It changes
the fields to use automatic memory management, in the form of
std::string and gdb::unique_xmalloc_ptr, and adds a constructor and a
destructor.
gdb/ChangeLog:
* jit.c (struct gdb_symtab): Add constructor, destructor,
initialize fields.
<linetable>: Change type to unique_xmalloc_ptr.
<file_name>: Change type to std::string.
(jit_symtab_open_impl): Allocate gdb_symtab with new.
(jit_symtab_line_mapping_add_impl): Adjust.
(finalize_symtab): Adjust, call delete on stab.
A double-free happens when using a JIT debug info reader that creates
more than one block. In the loop that frees blocks in finalize_symtab,
at the very end, the gdb_block_iter_tmp variable is set initially, but
not changed as the loop advances. If we have two blocks, the first
iteration frees the first block, the second iteration frees the second
block, but the third iteration tries to free the second block again, as
gdb_block_iter_tmp keeps pointing on the second block.
Fix it by assigning the gdb_block_iter_tmp variable in the loop.
I have improved the jit-reader.exp test to cover this case, by adding a
second "JIT-ed" function and creating a block for it. I have renamed
the existing function to something I find a bit more descriptive. There
are no significant changes to jit-reader.exp itself, only updates
following the renaming. The important changes are in jithost.c
(generate a new function) and in jitreader.c (create a gdb_block for
that function).
This was found because of an ASan report:
$ ./gdb testsuite/outputs/gdb.base/jit-reader/jit-reader -ex "jit-reader-load /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/jit-reader/jitreader.so" -ex r
Reading symbols from testsuite/outputs/gdb.base/jit-reader/jit-reader...
Starting program: /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/jit-reader/jit-reader
=================================================================
==1751048==ERROR: AddressSanitizer: heap-use-after-free on address 0x604000042eb8 at pc 0x5650ef8eec88 bp 0x7ffe52767290 sp 0x7ffe52767280
READ of size 8 at 0x604000042eb8 thread T0
#0 0x5650ef8eec87 in finalize_symtab /home/simark/src/binutils-gdb/gdb/jit.c:768
#1 0x5650ef8eef88 in jit_object_close_impl /home/simark/src/binutils-gdb/gdb/jit.c:797
#2 0x7fbbda986278 in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:71
#3 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#4 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#5 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#6 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
0x604000042eb8 is located 40 bytes inside of 48-byte region [0x604000042e90,0x604000042ec0)
freed by thread T0 here:
#0 0x7fbbe57376b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122
#1 0x5650ef8f350b in xfree<gdb_block> /home/simark/src/binutils-gdb/gdb/gdbsupport/common-utils.h:62
#2 0x5650ef8eeca9 in finalize_symtab /home/simark/src/binutils-gdb/gdb/jit.c:769
#3 0x5650ef8eef88 in jit_object_close_impl /home/simark/src/binutils-gdb/gdb/jit.c:797
#4 0x7fbbda986278 in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:71
#5 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#6 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#7 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#8 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
previously allocated by thread T0 here:
#0 0x7fbbe5737cd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153
#1 0x5650eef662f3 in xcalloc /home/simark/src/binutils-gdb/gdb/alloc.c:100
#2 0x5650ef8f34ea in xcnew<gdb_block> /home/simark/src/binutils-gdb/gdb/gdbsupport/poison.h:122
#3 0x5650ef8ed467 in jit_block_open_impl /home/simark/src/binutils-gdb/gdb/jit.c:557
#4 0x7fbbda98620a in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:60
#5 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#6 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#7 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#8 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
gdb/ChangeLog:
* jit.c (finalize_symtab): Set gdb_block_iter_tmp in loop.
gdb/testsuite/ChangeLog:
* gdb.base/jit-reader.exp (jit_reader_test): Rename
jit_function_00 to jit_function_stack_mangle.
* gdb.base/jithost.c (jit_function_t): Rename to...
(jit_function_stack_mangle_t): ... this.
(jit_function_add_t): New typedef.
(jit_function_00_code): Rename to...
(jit_function_stack_mangle_code): ... this, make static.
(jit_function_add_code): New.
(main): Generate "add" function and call it. Adjust to changes
in jithost_abi.
* gdb.base/jithost.h (struct jithost_abi_bounds): New.
(struct jithost_abi) <begin, end>: Remove fields.
<object, function_stack_mangle, function_add>: New fields.
* gdb.base/jitreader.c (struct reader_state) <code_begin,
code_end>: Remove fields.
<func_stack_mangle>: New field.
(read_debug_info): Adjust to renaming, create block for "add"
function.
(read_sp, unwind_frame, get_frame_id): Adjust to other changes.
Many places in this file use spaces only for indentation. Fix them to
conform to GNU style.
gdb/ChangeLog:
* jit.c: Fix indentation, replace spaces with tabs where
applicable.
The idea behind this is that, in the long run, some code will need to
be able to hold onto an objfile after it is unlinked from the program
space. In particular, this is needed for some functionality to be
moved to worker threads -- otherwise the objfile can be deleted while
still in use.
So, this makes ~objfile private, replacing it with an "unlink" method,
making it more obvious which operation is intended at the calling
points.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (syms_from_objfile_1): Use objfile_up.
(syms_from_objfile_1, remove_symbol_file_command): Call unlink
method.
(reread_symbols): Use objfile_up.
* solib.c (update_solib_list, reload_shared_libraries_1): Call
unlink method.
* objfiles.h (struct objfile) <~objfile>: Now private.
<unlink>: New method.
(struct objfile_deleter): New.
(objfile_up): New typedef.
* objfiles.c (objfile::unlink): New method.
(free_objfile_separate_debug, free_all_objfiles)
(objfile_purge_solibs): Use it.
* jit.c (jit_unregister_code): Remove.
(jit_inferior_exit_hook, jit_event_handler): Call unlink on
objfile.
* compile/compile-object-run.c (do_module_cleanup): Call unlink on
objfile.
* compile/compile-object-load.c (compile_object_load): Use
objfile_up.
Change-Id: I934bee70b26b8b24e1735828fb1e60fe8a05714f
This changes the objfile constructor to be private, changing the
callers to use a factory method. This isn't perhaps strictly needed
for the goal of this series -- changing the container model of
objfiles -- but is a nice symmetry.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_add_with_addrs): Use objfile::make.
* objfiles.h (struct objfile): Make constructor private.
<make>: New static method.
* jit.c (jit_object_close_impl): Update.
Change-Id: I42e07bc80a88cf3322ace94ffe869ae5788bcb29
I'm currently studying that code and noticed this manual memory
management, which could easily be replaced with a vector, so here it is.
gdb/ChangeLog:
* jit.c (jit_reader_try_read_symtab): Replace xmalloc/xfree with
gdb::byte_vector.
gdb/ChangeLog:
2019-11-28 Mihails Strasuns <mihails.strasuns@intel.com>
* jit.c (jit_bfd_try_read_symtab): Fix printed function name in the
debug output.
* jit.c (jit_unregister_code): Add debug print to match
`jit_register_code`.
Change-Id: Ie66064f3aaa1c74facfc025c8d87f3a057869779
Since this is now no longer a POD, also give it a constructor that
initializes all fields. (I have considered overloading operator new
to zero-initialize the memory instead; let me know if you prefer that)
gdb/ChangeLog:
2019-11-12 Christian Biesinger <cbiesinger@google.com>
* ada-exp.y (write_ambiguous_var): Update.
* buildsym.c (add_symbol_to_list): Update.
* dwarf2read.c (read_variable): Update.
(new_symbol): Update.
* jit.c (finalize_symtab): Update.
* language.c (language_alloc_type_symbol): Update.
* symtab.c (fixup_symbol_section): Update.
(initialize_objfile_symbol_1): Move code to...
(initialize_objfile_symbol): ...here. Remove now-unnecessary memset.
(allocate_symbol): Update.
(allocate_template_symbol): Update.
(get_symbol_address): Update.
* symtab.h (struct symbol): Inherit from general_symbol_info instead
of having as a field, and add a constructor.
(SYMBOL_VALUE): Update.
(SYMBOL_VALUE_ADDRESS): Update.
(SET_SYMBOL_VALUE_ADDRESS): Update.
(SYMBOL_VALUE_BYTES): Update.
(SYMBOL_VALUE_COMMON_BLOCK): Update.
(SYMBOL_BLOCK_VALUE): Update.
(SYMBOL_VALUE_CHAIN): Update.
(SYMBOL_LANGUAGE): Update.
(SYMBOL_SECTION): Update.
(SYMBOL_OBJ_SECTION): Update.
(SYMBOL_SET_LANGUAGE): Update.
(SYMBOL_SET_LINKAGE_NAME): Update.
(SYMBOL_SET_NAMES): Update.
(SYMBOL_NATURAL_NAME): Update.
(SYMBOL_LINKAGE_NAME): Update.
(SYMBOL_DEMANGLED_NAME): Update.
(SYMBOL_SEARCH_NAME): Update.
(SYMBOL_MATCHES_SEARCH_NAME): Update.
(struct symbol): Update.
(struct template_symbol): Update.
(struct rust_vtable_symbol): Update.
* xcoffread.c (SYMBOL_DUP): Update.
Change-Id: I05b1628455bcce3efaa101e65ef051708d17eb07
This simplifies memory management. I've also changed some global variables
to std::string accordingly (which store the result of these functions),
but not all because some are used with add_setshow_optional_filename_cmd
which requires a char*.
gdb/ChangeLog:
2019-09-11 Christian Biesinger <cbiesinger@google.com>
* auto-load.c (auto_load_expand_dir_vars): Update.
* defs.h (gdb_datadir): Change to std::string.
(python_libdir): Likewise.
(relocate_gdb_directory): Change return type to std::string.
* guile/guile.c (gdbscm_data_directory): Update.
(initialize_scheme_side): Update.
* jit.c (jit_reader_dir): Change to std::string.
(jit_reader_load_command): Update.
* main.c (gdb_datadir): Change to std::string.
(python_libdir): Likewise.
(set_gdb_data_directory): Update.
(relocate_path): Change to return std::string.
(relocate_gdb_directory): Change to return std::string.
(relocate_gdbinit_path_maybe_in_datadir): Update.
(captured_main_1): Update.
* python/python.c (do_start_initialization): Update.
* top.c (show_gdb_datadir): Update.
* xml-syscall.c (xml_init_syscalls_info): Update.
(init_syscalls_info): Update.
I need to use 'gdb_dlopen' inside 'gdbsupport/', but it's not yet
supported there. This commit moves 'gdb-dlfcn.[ch]' to 'gdbsupport/',
which makes it available also on gdbserver.
gdb/ChangeLog:
2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
* configure.ac: Don't check for 'dlfcn.h' (moved to
gdbsupport/common.m4).
* Makefile.in (COMMON_SFILES): Move 'gdb-dlfcn.c' to
'gdbsupport/'.
(HFILES_NO_SRCDIR): Likewise, for 'gdb-dlfcn.h'.
* compile/compile-c-support.c: Include
'gdbsupport/gdb-dlfcn.h'.
* gdbsupport/common.m4: Check for 'dlfcn.h'.
* gdb-dlfcn.c: Move to...
* gdbsupport/gdb-dlfcn.c: ... here.
* gdb-dlfcn.h: Move to...
* gdbsupport/gdb-dlfcn.h: ... here.
gdb/gdbserver/ChangeLog:
2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add 'gdbsupport/gdb-dlfcn.c'.
(OBS): Add 'gdbsupport/gdb-dlfcn.o'.
* config.in: Regenerate.
* configure: Regenerate.
This changes gdb to use obstack_strdup when appropriate, rather than
the wordier obstack_copy0.
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* xcoffread.c (SYMNAME_ALLOC, process_xcoff_symbol): Use
obstack_strdup.
* typeprint.c (typedef_hash_table::find_global_typedef): Use
obstack_strdup.
* symfile.c (allocate_compunit_symtab): Use obstack_strdup.
* stabsread.c (common_block_start): Use obstack_strdup.
* objfiles.c (set_objfile_main_name, objfile): Use
obstack_strdup.
* namespace.c (add_using_directive): Use obstack_strdup.
* mdebugread.c (parse_symbol, parse_type): Use obstack_strdup.
* jit.c (finalize_symtab): Use obstack_strdup.
* dwarf2read.c (fixup_go_packaging, dwarf2_physname)
(guess_partial_die_structure_name, partial_die_info::fixup)
(dwarf2_name): Use obstack_strdup.
* coffread.c (coff_read_struct_type, coff_read_enum_type): Use
obstack_strdup.
* c-exp.y (scan_macro_expansion): Use obstack_strdup.
* buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use
obstack_strdup.
* ada-lang.c (ada_decode_symbol): Use obstack_strdup.
This changes jit.c to use the type-safe registry. Only one of the
registry keys in jit.c is converted; the other is trickier and so I've
left it be for now.
gdb/ChangeLog
2019-07-10 Tom Tromey <tromey@adacore.com>
* jit.c (jit_program_space_key): Change type. Move lower.
(get_jit_program_space_data): Update.
(jit_program_space_data_cleanup): Remove.
(jit_breakpoint_deleted, free_objfile_data, _initialize_jit):
Update.
(struct jit_program_space_data): Add initializers.
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
I was curious what used the terminating "null" minimal symbol; and
after looking I could not find anything. This patch removes
terminate_minimal_symbol_table and the extra minimal symbol that is
allocated for it.
gdb/ChangeLog
2019-03-15 Tom Tromey <tom@tromey.com>
* symfile.c (reread_symbols): Update.
* objfiles.c (objfile::objfile): Update.
* minsyms.h (terminate_minimal_symbol_table): Don't declare.
* minsyms.c (lookup_minimal_symbol_by_pc_section): Update
comment.
(minimal_symbol_reader::install): Update.
(terminate_minimal_symbol_table): Remove.
* jit.c (jit_object_close_impl): Update.
This changes the all_objfiles_safe range adapter to be a method on the
program space, and fixes up all the users.
gdb/ChangeLog
2019-01-15 Tom Tromey <tom@tromey.com>
* progspace.h (program_space) <objfiles_safe_range>: New
typedef.
<objfiles_safe>: New method.
* objfiles.h (class all_objfiles_safe): Remove.
* objfiles.c (free_all_objfiles, objfile_purge_solibs): Update.
* jit.c (jit_inferior_exit_hook): Update.
This patch builds on the previous by enabling the `new' multidictionary
API. A lot of the hunks are simply textual replacements of "dict_"
with "mdict_" and similar transformations.
A word of warning, even with the use of multidictionaries, the code
still does not satisfactorily fix the reported problems with gdb/23712
(or gdb/23010). We still have additional changes to make before that
happens.
gdb/ChangeLog:
PR gdb/23712
PR symtab/23010
* dictionary.h (struct dictionary): Replace declaration with
multidictionary.
(dict_create_hashed, dict_create_hashed_expandable)
(dict_create_linear, dict_create_linear_expandable)
(dict_free, dict_add_symbol, dict_add_pending, dict_empty)
(dict_iterator_first, dict_iterator_next, dict_iter_match_first)
(dict_iter_match_next, dict_size): Rename to "mdict_" versions
taking multidictionary argument.
[ALL_DICT_SYMBOLS]: Update for multidictionary.
* block.h (struct block) <dict>: Change to multidictionary
and rename `multidict'.
* block.c, buildsym.c, jit.c, mdebugread.c, objfiles.c,
symmisc.c: Update all dictionary references to multidictionary.
This removes most uses of ALL_OBJFILES, replacing them with ranged for
loops. The remaining uses are all in macros, and will be removed in
subsequent patches.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (iterate_over_symtabs, matching_obj_sections)
(expand_symtab_containing_pc, lookup_static_symbol)
(basic_lookup_transparent_type, find_pc_sect_compunit_symtab)
(find_symbol_at_address, find_line_symtab, find_main_name): Use
all_objfiles.
* probe.c (find_probe_by_pc, collect_probes): Use all_objfiles.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Use all_objfiles.
* linux-thread-db.c (try_thread_db_load_from_pdir)
(has_libpthread): Use all_objfiles.
* ada-lang.c (add_nonlocal_symbols): Use all_objfiles.
* linespec.c (iterate_over_all_matching_symtabs)
(search_minsyms_for_name): Use all_objfiles.
* maint.c (maintenance_info_sections): Use all_objfiles.
* main.c (captured_main_1): Use all_objfiles.
* spu-tdep.c (spu_objfile_from_frame): Use all_objfiles.
* guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles.
* guile/scm-pretty-print.c
(ppscm_find_pretty_printer_from_objfiles): Use all_objfiles.
* solib-spu.c (append_ocl_sos): Use all_objfiles.
* symmisc.c (maintenance_print_symbols): Use all_objfiles.
(maintenance_print_msymbols): Use all_objfiles.
* source.c (select_source_symtab): Use all_objfiles.
* jit.c (jit_find_objf_with_entry_addr): Use all_objfiles.
* symfile.c (remove_symbol_file_command)
(expand_symtabs_matching, map_symbol_filenames): Use
all_objfiles.
* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use
all_objfiles.
* dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles.
* objc-lang.c (find_methods): Use all_objfiles.
* objfiles.c (have_partial_symbols, have_full_symbols)
(have_minimal_symbols, qsort_cmp)
(default_iterate_over_objfiles_in_search_order): Use
all_objfiles.
* hppa-tdep.c (find_unwind_entry): Use all_objfiles.
* psymtab.c (maintenance_print_psymbols): Use all_objfiles.
(maintenance_check_psymtabs): Use all_objfiles.
(ALL_PSYMTABS): Remove.
* compile/compile-object-run.c (do_module_cleanup): Use
all_objfiles.
* blockframe.c (find_pc_partial_function): Use all_objfiles.
* cp-support.c (add_symbol_overload_list_qualified): Use
all_objfiles.
* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
Use all_objfiles.
* dwarf-index-write.c (save_gdb_index_command): Use all_objfiles.
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use
all_objfiles.
* python/py-objfile.c (objfpy_lookup_objfile_by_name)
(objfpy_lookup_objfile_by_build_id): Use all_objfiles.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
Uses all_objfiles.
* solib.c (solib_read_symbols): Use all_objfiles
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
A user at Mozilla pointed out a crash in jit.c. In his situation, an
inferior using the JIT API exec'd an executable that did not use it.
This caused an assertion failure when jit.c:free_objfile_data called
delete_breakpoint with NULL.
This patch fixes the problem in the obvious way. New test case
included.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* jit.c (free_objfile_data): Only delete breakpoint if non-null.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
Simon Marchi <simark@simark.ca>
* gdb.base/jit-exec.exp: New file.
* gdb.base/jit-exec.c: New file.
* gdb.base/jit-execd.c: New file.
Function lookup_minimal_symbol_and_objfile iterates on all objfiles and
calls lookup_minimal_symbol for each of them, effectively searching in all
objfiles. lookup_bound_minimal_symbol calls lookup_minimal_symbol with NULL,
which also effectively searches all objfiles. AFAIK, they do exactly the same
thing, so we can get rid of one (and lookup_minimal_symbol_and_objfile happens
to be the most inefficient because it ends up n^2 on the number of objfiles).
Tested in both aarch64-linux-gnu and amd64-linux-gnu. No regressions.
This removes the long_long_align_bit gdbarch attribute in favor of
type_align. This uncovered two possible issues.
First, arc-tdep.c claimed that long long alignment was 32 bits, but as
discussed on the list, ARC has a maximum alignment of 32 bits, so I've
added an arc_type_align function to account for this.
Second, jit.c, the sole user of long_long_align_bit, was confusing
"long long" with uint64_t. The relevant structure is defined in the
JIT API part of the manual as:
struct jit_code_entry
{
struct jit_code_entry *next_entry;
struct jit_code_entry *prev_entry;
const char *symfile_addr;
uint64_t symfile_size;
};
I've changed this code to use uint64_t.
2018-04-30 Tom Tromey <tom@tromey.com>
* jit.c (jit_read_code_entry): Use type_align.
* i386-tdep.c (i386_gdbarch_init): Don't call
set_gdbarch_long_long_align_bit.
* gdbarch.sh: Remove long_long_align_bit.
* gdbarch.c, gdbarch.h: Rebuild.
* arc-tdep.c (arc_type_align): New function.
(arc_gdbarch_init): Use arc_type_align. Don't call
set_gdbarch_long_long_align_bit.
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
jit.c uses the regcache in a slightly different way, the regcache dosen't
write through to target, but it has read and write methods. If I apply
regcache in record-full.c, it has the similar use pattern. This patch
adds a new class detached_regcache, a register buffer, but can be
read and written.
Since jit.c doesn't want to write registers through to target, it uses
regcache as a readonly regcache (because only readonly regcache
disconnects from the target), but it adds a hole in regcache
(raw_set_cached_value) in order to modify a readonly regcache. This patch
fixes this hole completely.
regcache inherits detached_regcache, and detached_regcache inherits
readable_regcache. The ideal design is that both detached_regcache and
readable_regcache inherit reg_buffer, and regcache inherit
detached_regcache and regcache_read (virtual inheritance). I concern
about the performance overhead of virtual inheritance, so I don't do it in
the patch.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* jit.c (struct jit_unwind_private) <regcache>: Change its type to
reg_buffer_rw *.
(jit_unwind_reg_set_impl): Call raw_supply.
(jit_frame_sniffer): Use reg_buffer_rw.
* record-full.c (record_full_core_regbuf): Change its type.
(record_full_core_open_1): Use reg_buffer_rw.
(record_full_close): Likewise.
(record_full_core_fetch_registers): Use regcache->raw_supply.
(record_full_core_store_registers): Likewise.
* regcache.c (regcache::get_register_status): Move it to
reg_buffer.
(regcache_raw_set_cached_value): Remove.
(regcache::raw_set_cached_value): Remove.
(regcache::raw_write): Call raw_supply.
(regcache::raw_supply): Move it to reg_buffer_rw.
* regcache.h (regcache_raw_set_cached_value): Remove.
(reg_buffer_rw): New class.
gdbarch_pseudo_register_read_value is not implemented in every gdbarch, so
the predicate gdbarch_pseudo_register_read_value_p is needed before
calling it. However, there is no such guard in jit_frame_prev_register, I
am wondering how does jit work on the arch without having gdbarch method
pseudo_register_read_value.
The proper way to get register value is to call cooked_read, and then
create the value object from the buffer.
gdb:
2018-01-22 Yao Qi <yao.qi@linaro.org>
* jit.c (jit_frame_prev_register): Call regcache::cooked_read
instead of gdbarch_pseudo_register_read_value.
Currently, we have a mess of symbol name hashing/comparison routines.
There's msymbol_hash for mangled names, and dict_hash and
msymbol_hash_iw for demangled names. Then there's strcmp_iw,
strcmp_iw_ordered and Ada's full_match/wild_match, which all have to
agree with the hashing routines. That's why dict_hash is really about
Ada names. From the inconsistency department, minimal symbol hashing
doesn't go via dict_hash, so Ada's wild matching can't ever work with
minimal symbols.
This patch starts fixing this, by doing two things:
#1 - adds a language vector method to let each language decide how to
compute a symbol name hash.
#2 - makes dictionaries know the language of the symbols they hold,
and then use the dictionaries language to decide which hashing
method to use.
For now, this is just scaffolding, since all languages install the
default method. The series will make C++ install its own hashing
method later on, and will add per-language symbol name comparison
routines too.
This patch was originally based on a patch that Keith wrote for the
libcc1/C++ WIP support.
gdb/ChangeLog:
2017-11-08 Keith Seitz <keiths@redhat.com>
Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_language_defn): Install
default_search_name_hash.
* buildsym.c (struct buildsym_compunit): <language>: New field.
(finish_block_internal): Pass language when creating dictionaries.
(start_buildsym_compunit, start_symtab): New language parameters.
Use them.
(restart_symtab): Pass down compilation unit's language.
* buildsym.h (enum language): Forward declare.
(start_symtab): New 'language' parameter.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Install
default_search_name_hash.
* coffread.c (coff_start_symtab): Adjust.
* d-lang.c (d_language_defn): Install default_search_name_hash.
* dbxread.c (struct symloc): Add 'pst_language' field.
(PST_LANGUAGE): Define.
(start_psymtab, read_ofile_symtab): Use it.
(process_one_symbol): New 'language' parameter. Pass it down.
* dictionary.c (struct dictionary) <language>: New field.
(DICT_LANGUAGE): Define.
(dict_create_hashed, dict_create_hashed_expandable)
(dict_create_linear, dict_create_linear_expandable): New parameter
'language'. Set the dictionary's language.
(iter_match_first_hashed): Adjust to rename.
(insert_symbol_hashed): Assert we don't see mismatching
languages. Adjust to rename.
(dict_hash): Rename to ...
(default_search_name_hash): ... this and make extern.
* dictionary.h (struct language_defn): Forward declare.
(dict_create_hashed): New parameter 'language'.
* dwarf2read.c (dwarf2_start_symtab): Pass down language.
* f-lang.c (f_language_defn): Install default_search_name_hash.
* go-lang.c (go_language_defn): Install default_search_name_hash.
* jit.c (finalize_symtab): Pass compunit's language to dictionary
creation.
* language.c (unknown_language_defn, auto_language_defn):
* language.h (language_defn::la_search_name_hash): New field.
(default_search_name_hash): Declare.
* m2-lang.c (m2_language_defn): Install default_search_name_hash.
* mdebugread.c (new_block): New parameter 'language'.
* mdebugread.c (parse_symbol): Pass symbol language to block
allocation.
(psymtab_to_symtab_1): Pass down language.
(new_symtab): Pass compunit's language to block allocation.
* objc-lang.c (objc_language_defn): Install
default_search_name_hash.
* opencl-lang.c (opencl_language_defn):
* p-lang.c (pascal_language_defn): Install
default_search_name_hash.
* rust-lang.c (rust_language_defn): Install
default_search_name_hash.
* stabsread.h (enum language): Forward declare.
(process_one_symbol): Add 'language' parameter.
* symtab.c (search_name_hash): New function.
* symtab.h (search_name_hash): Declare.
* xcoffread.c (read_xcoff_symtab): Pass language to start_symtab.
The address space is useless to readonly regcache, so this patch removes
the parameter to construct readonly regcache.
address_space was added in regcache by 6c95b8d, but for read-write
regcache. regcache::aspace is used for various breakpoint/watchpoint
checking, and these regcache are not read-only regcache.
gdb:
2017-11-02 Yao Qi <yao.qi@linaro.org>
* frame.c (do_frame_register_read): Remove aspace.
* jit.c (jit_frame_sniffer): Likwise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Likewise.
* regcache.c (regcache::regcache): Pass nullptr.
(regcache_print): Caller updated.
* regcache.h (regcache::regcache): Remove one constructor
parameter aspace.
This changes objfiles to use new and delete rather than xmalloc and
free. Simon noticed that it uses a non-POD and so shouldn't be
allocated with XCNEW; and I wanted to be able to use another non-POD as
a member; this patch is the result.
Regression tested by the buildbot.
2017-10-13 Tom Tromey <tom@tromey.com>
* compile/compile-object-run.c (do_module_cleanup): Use delete.
* solib.c (update_solib_list, reload_shared_libraries_1): Use
delete.
* symfile.c (symbol_file_add_with_addrs): Use new.
(symbol_file_add_separate): Update comment.
(syms_from_objfile_1, remove_symbol_file_command): Use delete.
* jit.c (jit_object_close_impl): Use new.
(jit_unregister_code): Use delete.
* objfiles.c (objfile::objfile): Rename from allocate_objfile.
(~objfile): Rename from free_objfile.
(free_objfile_separate_debug, do_free_objfile_cleanup)
(free_all_objfiles, objfile_purge_solibs): Use delete.
* objfiles.h (struct objfile): Add constructor and destructor.
Use DISABLE_COPY_AND_ASSIGN. Add initializers to data members.
(allocate_objfile, free_objfile): Don't declare.
(struct objstats): Add initializers.
This changes the interfaces to init_type and arch_type to take the
type length in bits as input (instead of as bytes). The routines
assert that the length is a multiple of TARGET_CHAR_BIT.
For consistency, arch_flags_type is changed likewise, so that now
all type creation interfaces always use length in bits.
All callers are updated in the straightforward manner.
The assert actually found a bug in read_range_type, where the
init_integer_type routine was called with a wrong argument (probably
a bug introduced with the conversion to use init_integer_type).
gdb/ChangeLog
2017-09-27 Ulrich Weigand <uweigand@de.ibm.com>
* gdbtypes.c (init_type): Change incoming argument from
length-in-bytes to length-in-bits. Assert length is a
multiple of TARGET_CHAR_BITS.
(arch_type, arch_flags_type): Likewise.
(init_integer_type): Update call to init_type.
(init_character_type): Likewise.
(init_boolean_type): Likewise.
(init_float_type): Likewise.
(init_decfloat_type): Likewise.
(init_complex_type): Likewise.
(init_pointer_type): Likewise.
(objfile_type): Likewise.
(arch_integer_type): Update call to arch_type.
(arch_character_type): Likewise.
(arch_boolean_type): Likewise.
(arch_float_type): Likewise.
(arch_decfloat_type): Likewise.
(arch_complex_type): Likewise.
(arch_pointer_type): Likewise.
(gdbtypes_post_init): Likewise.
* dwarf2read.c (dwarf2_init_float_type): Update call to init_type.
(read_base_type): Likewise.
* mdebugread.c (basic_type): Likewise.
* stabsread.c (dbx_init_float_type): Likewise.
(rs6000_builtin_type): Likewise.
(read_range_type): Likewise. Also, fix call to init_integer_type
with erroneous length argument.
* ada-lang.c (ada_language_arch_info): Update call to arch_type.
* d-lang.c (build_d_types): Likewise.
* f-lang.c (build_fortran_types): Likewise.
* go-lang.c (build_go_types): Likewise.
* opencl-lang.c (build_opencl_types): Likewise.
* jit.c (finalize_symtab): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
(build_std_type_info_type): Likewise.
* target-descriptions.c (tdesc_gdb_type): Likewise. Also,
update call to arch_flags_type.
* linux-tdep.c (linux_get_siginfo_type_with_fields): Update call to
arch_type.
* fbsd-tdep.c (fbsd_get_siginfo_type): Likewise.
* windows-tdep.c (windows_get_tlb_type): Likewise.
* avr-tdep.c (avr_gdbarch_init): Update call to arch_type.
* ft32-tdep.c (ft32_gdbarch_init): Likewise.
* m32c-tdep.c (make_types): Likewise.
* rl78-tdep.c (rl78_gdbarch_init): Likewise.
(rl78_psw_type): Update call to arch_flags_type.
* m68k-tdep.c (m68k_ps_type): Update call to arch_flags_type.
* rx-tdep.c (rx_psw_type): Likewise.
(rx_fpsw_type): Likewise.
* sparc-tdep.c (sparc_psr_type): Likewise.
(sparc_fsr_type): Likewise.
* sparc64-tdep.c (sparc64_pstate_type): Likewise.
(sparc64_ccr_type): Likewise.
(sparc64_fsr_type): Likewise.
(sparc64_fprs_type): Likewise.
Tankut Baris Aktemur
Tom Tromey
Andrew Burgess
Simon Marchi
Joel Brobecker
Christian Biesinger
Simon Marchi
Mihails Strasuns
Tom de Vries
Alan Modra
Sergio Durigan Junior
Tom Tromey
Keith Seitz
Weimin Pan
Yao Qi
Pedro Alves
Ulrich Weigand