TCB_SIZE is 2*sizeof(void *), which is 0x10 for lp64, and 0x8 for
ilp32. During relaxation, ld goes to do a replace:
bl __tls_get_addr => add R0, R0, TCB_SIZE
But actual implementation is:
bfd_putl32 (0x91004000, contents + rel->r_offset + 4);
Which is equivalent of add x0, x0, 0x10. This is wrong for ilp32.
The possible fix for it is:
bfd_putl32 (0x91000000 | (TCB_SIZE<<10), contents + rel->r_offset + 4);
But ilp32 also needs w-registers, so it's simpler to put proper
instruction in #if/#else condition.
THere are 2 such relaxations in elfNN_aarch64_tls_relax(), and so 2 new
tests added for ilp32 mode to test it.
Yury
gold/
PR gold/20749
* options.h (--orphan-handling): New option.
(General_options::Orphan_handling): New enum.
(General_options::orphan_handling_enum): New method.
(General_options::set_orphan_handling_enum): New method.
(General_options::orphan_handling_enum_): New data member.
* options.cc (General_options::General_options): Initialize new member.
(General_options::finalize): Convert --orphan-handling argument to enum.
* script-sections.cc (Script_sections::output_section_name): Check it.
The internal CN register representation for coprocessor fields used in aarch64
sys, sysl instructions are removed in this patch.
After the change, those fields are represented as immediate. Related checks are
added as well.
opcodes/
* aarch64-opc.c (aarch64_opnd_qualifiers): New CR value range
qualifier.
(operand_general_constraint_met_p): Remove case for CP_REG.
(aarch64_print_operand): Print CRn, CRm operand using imm field.
* aarch64-tbl.h (QL_SYS): Use CR qualifier.
(QL_SYSL): Likewise.
(aarch64_opcode_table): Change CRn, CRm operand class and type.
* aarch64-opc-2.c : Regenerate.
* aarch64-asm-2.c : Likewise.
* aarch64-dis-2.c : Likewise.
include/
* opcode/aarch64.h (aarch64_operand_class): Remove
AARCH64_OPND_CLASS_CP_REG.
(enum aarch64_opnd): Change AARCH64_OPND_Cn to AARCH64_OPND_CRn,
AARCH64_OPND_Cm to AARCH64_OPND_CRm.
(aarch64_opnd_qualifier): Define AARCH64_OPND_QLF_CR qualifier.
gas/
* config/tc-aarch64.c (AARCH64_REG_TYPES): Remove CN register.
(get_reg_expected_msg): Remove CN register case.
(parse_operands): rewrite parser for CRn, CRm operand.
(reg_names): Remove CN register.
* testsuite/gas/aarch64/diagnostic.s: Add a new test case.
* testsuite/gas/aarch64/diagnostic.l: Adjust error message.
sim/aarch64
* simulator.c (NEG, POS): Move before set_flags_for_add64.
(set_flags_for_add64): Replace with a modified copy of
set_flags_for_sub64.
sim/testsuite/sim/aarch64
* testutils.inc (pass): Move .Lpass to start.
(fail): Move .Lfail to start. Return 1 instead of 0.
(start): Moved .Lpass and .Lfail to here.
* adds.s: New.
* fstur.s: New.
* tbnz.s: New.
There were still some cases I found where orphan section placement
was screwy -- where the script has no output section description for
either .data or .bss, a .bss orphan section ends up getting placed
before the .data section. In addition, if there is an output section
description for a data section not named .data (e.g., .rela.dyn),
the orphan .bss gets placed before it. This patch cleans that up,
by tracking the last allocated section even as we're adding orphans.
I've also improved segment layout in the absence of a PHDRS clause.
A zero-length NOBITS section will no longer force a new segment
when followed by a PROGBITS section.
2016-12-12 Cary Coutant <ccoutant@gmail.com>
gold/
* script-sections.cc (Orphan_section_placement::update_last_alloc):
New method.
(Orphan_section_placement::find_place): Place orphan .data section
after either RODATA or TEXT.
(Script_sections::place_orphan): Call update_last_alloc for allocated
sections.
(Script_sections::create_segments): Improve handling of BSS.
HPPA64 needs to add a DT_PHDR header for shared libs. That's fine
when linking but shouldn't happen for strip/objcopy. Also PHDR must
come first so there's no need to look at all program headers.
bfd/
* elf64-hppa.c (elf64_hppa_modify_segment_map): Don't add PHDR
for objcopy/strip or when a ld script specifies PHDRS.
ld/
* testsuite/ld-elf/nobits-1.d: Remove xfail for hppa64.
* testsuite/ld-elf/note-1.d: Likewise.
* testsuite/ld-elf/note-2.d: Likewise.
RX does horrible fudges to PT_LOAD p_vaddr, that affect the testsuite
and mean the target won't support dynamic objects. The latter
probably doesn't matter too much since RX is an embedded target, but
it's easy to stop some of the fudges in order to reduce special cases
for RX in the testsuite. The changes make sense in isolation too.
bfd/
* elf32-rx.c (elf32_rx_modify_program_headers): Don't adjust
segments that include the ELF file header or program headers.
ld/
* testsuite/ld-elf/flags1.d: Run for RX.
* testsuite/ld-scripts/phdrs.exp: Likewise.
* testsuite/ld-scripts/pr14962.d: Likewise.
* testsuite/ld-scripts/pr14962-2.d: Likewise.
PowerPC64 aligns .got to a 256 byte boundary. This tends to bump the
data segment file size.
PR gold/16711
* testsuite/script_test_15a.sh: Allows larger p_filesz.
* testsuite/script_test_15b.sh: Likewise.
* testsuite/script_test_15c.sh: Likewise.
Since the linker created .TOC. symbol is placed at roughly .got+32k,
.toc input sections must be placed in or after .got if .toc entries
are accessed using 16-bit signed offset relocs. crt1.o contains such
a relocation.
PR gold/20717
* testsuite/pr20717.t: Add .got output section containing .toc.
cris_delayed_get_disassembler has an assert that exec_bfd can't be
NULL, but this assert can be triggered like this,
(gdb) set architecture cris
The target architecture is assumed to be cris
(gdb) disassemble 0x0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000:
../../binutils-gdb/gdb/cris-tdep.c:3798: internal-error: int cris_delayed_get_disassembler(bfd_vma, disassemble_info*): Assertion `exec_bfd != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
however, cris_get_disassembler does have code to handle the case that
bfd is NULL,
/* If there's no bfd in sight, we return what is valid as input in all
contexts if fed back to the assembler: disassembly *with* register
prefix. Unfortunately this will be totally wrong for v32. */
if (abfd == NULL)
return print_insn_cris_with_register_prefix;
This patch is to remove this assert.
gdb:
2016-12-12 Yao Qi <yao.qi@linaro.org>
PR tdep/20955
* cris-tdep.c (cris_delayed_get_disassembler): Remove the
assert.
Nowadays, memory error in rx disassembly is not handled, so if I
start a fresh GDB, and disassemble,
(gdb) set architecture rx
The target architecture is assumed to be rx
(gdb) disassemble 0x0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: brk
0x00000001: brk
0x00000002: brk
0x00000003: brk
the output is wrong. This patch adds code to call dis->memory_error_func
on memory error, and longjmp to print_insn_rx. With this patch applied,
(gdb) set architecture rx
The target architecture is assumed to be rx
(gdb) disassemble 0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: Cannot access memory at address 0x0
opcodes:
2016-12-12 Yao Qi <yao.qi@linaro.org>
* rx-dis.c: Include <setjmp.h>
(struct private): New.
(rx_get_byte): Check return value of read_memory_func, and
call memory_error_func and OPCODES_SIGLONGJMP on error.
(print_insn_rx): Call OPCODES_SIGSETJMP.
Nowadays, memory error in rl78 disassembly is not handled, so if I
start a fresh GDB, and disassemble,
(gdb) set architecture rl78
The target architecture is assumed to be rl78
(gdb) disassemble 0x0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: nop
0x00000001: nop
0x00000002: nop
0x00000003: nop
the output is wrong. This patch adds code to call dis->memory_error_func
on memory error, and longjmp to print_insn_rl78_common. With this
patch applied,
(gdb) set architecture rl78
The target architecture is assumed to be rl78
(gdb) disassemble 0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: Cannot access memory at address 0x0
opcodes:
2016-12-12 Yao Qi <yao.qi@linaro.org>
* rl78-dis.c: Include <setjmp.h>.
(struct private): New.
(rl78_get_byte): Check return value of read_memory_func, and
call memory_error_func and OPCODES_SIGLONGJMP on error.
(print_insn_rl78_common): Call OPCODES_SIGJMP.
2016-12-01 Cary Coutant <ccoutant@gmail.com>
Igor Kudrin <ikudrin@accesssoftek.com>
PR gold/20717
* script-sections.cc (Script_sections): Set *keep to false when
no match.
2016-12-11 Igor Kudrin <ikudrin@accesssoftek.com>
PR gold/20717
* testsuite/Makefile.am (pr20717): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/pr20717.c: New test source file.
* testsuite/pr20717.sh: New test script.
* testsuite/pr20717.t: New test linker script.
PR 16711 noted that gold allocates file space for BSS sections when using
a linker script. I've fixed that by rewriting set_section_addresses and
set_section_list_addresses to track the file offset separate from the
current virtual address, so that BSS sections do not move the file offset.
Now, if a series of BSS sections come at the end of a segment, we do not
allocate file space; but if a script forces them into the middle of a
segment, we will still allocate file space (matching Gnu ld behavior).
I've also added a warning when that happens.
That exposed another problem where orphan .bss sections were sometimes
placed in the middle of a segment. For example, if the script mentions
the .got section, but both .data and .bss are orphans, gold would put
both .data and .bss in front of .got. I've fixed that by ensuring that
orphan BSS sections are always placed after all other allocated sections.
It also exposed a problem where the SUBALIGN property is not handled
properly. The ld manual clearly states that it should override input section
alignment, whether greater or less than the given alignment, but gold would
only increase an input section's alignment. Gold would also place the output
section based on its original alignment before the SUBALIGN property took
effect, leading to a misaligned output section (where the input section
was properly aligned in memory, but was not aligned relative to the start
of the section), in violation of the ELF/gABI spec. I've fixed that by
making sure that the SUBALIGN property overrides the internal alignment of
the input sections as well as the external alignment of the output section.
This affected the behavior of script_test_2, which was written to expect
a misaligned section.
The net effect is, I think, improved compatibility with the BFD linker.
There are still cases where orphan placement differs, but the differences
should be rarer and less important. ALIGN and SUBALIGN behavior is closer,
but still not an exact match -- I still found cases where ld would create
a misaligned output section, and where gold will properly align it.
gold/
PR gold/16711
* output.cc (Output_section::set_final_data_size): Calculate data size
based on relative offset rather than file offset.
(Output_segment::set_section_addresses): Track file offset separately
from address offset.
(Output_segment::set_section_list_addresses): Add pfoff parameter.
Track file offset separately. Don't move file offset for BSS
sections.
* output.h (Output_segment::set_section_list_addresses): Add pfoff
parameter.
* script-sections.cc (Orphan_section_placement): Add PLACE_LAST_ALLOC.
(Orphan_section_placement::Orphan_section_placement): Initialize it.
(Orphan_section_placement::output_section_init): Track last allocated
section.
(Orphan_section_placement::find_place): Place BSS after last allocated
section.
(Output_section_element_input::set_section_addresses): Always override
input section alignment when SUBALIGN is specified.
(Output_section_definition::set_section_addresses): Override alignment
of output section when SUBALIGN is specified.
* testsuite/Makefile.am (script_test_15a, script_test_15b)
(script_test_15c): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/script_test_2.cc: Adjust expected layout.
* testsuite/script_test_15.c: New source file.
* testsuite/script_test_15a.sh: New shell script.
* testsuite/script_test_15a.t: New linker script.
* testsuite/script_test_15b.sh: New shell script.
* testsuite/script_test_15b.t: New linker script.
* testsuite/script_test_15c.sh: New shell script.
* testsuite/script_test_15c.t: New linker script.
This code has never been used throughout the repository history, and
likely not before either, as due to the assymetry of MIPS16 instruction
set encoding there are no 32-bit shift operations having their immediate
shift count placed in the position of the usual `rx' instruction field.
gas/
* config/tc-mips.c (mips16_macro_build) <'>'>: Remove case.
include/
* opcode/mips.h: Remove references to `>' operand code.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'>'>: Remove cases.
Make the `e' operand code used with raw EXTEND instructions use the
hexadecimal rather than decimal format, for consistency with what is
actually produced by code in `print_insn_mips16' dedicated to EXTEND
disassembly. Due to that special handling the operand code is only
interpreted for assembly however, which accepts either format either
way, so there is no functional change here.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'e'>: Use HINT rather
than UINT.
gas/
* testsuite/gas/mips/mips16-extend.d: New test.
* testsuite/gas/mips/mips16-extend.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Use a tab rather than a space to separate `extend' and its uninterpreted
argument output, like with regular instructions. Separate hexadecimal
halves of undecoded extended instructions output with a space instead of
presenting them concatenated.
opcodes/
* mips-dis.c (print_insn_mips16): Use a tab rather than a space
to separate `extend' and its uninterpreted argument output.
Separate hexadecimal halves of undecoded extended instructions
output.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-noinsn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
I build GDB with all targets enabled, and "set architecture rx",
GDB crashes,
(gdb) set architecture rx
Program received signal SIGSEGV, Segmentation fault.
append_flags_type_flag (type=0x20cc360, bitpos=bitpos@entry=0, name=name@entry=0xd27529 "C") at ../../binutils-gdb/gdb/gdbtypes.c:4926
4926 name);
(gdb) bt 10
#0 append_flags_type_flag (type=0x20cc360, bitpos=bitpos@entry=0, name=name@entry=0xd27529 "C") at ../../binutils-gdb/gdb/gdbtypes.c:4926
#1 0x00000000004ce725 in rx_gdbarch_init (info=..., arches=<optimized out>) at ../../binutils-gdb/gdb/rx-tdep.c:1051
#2 0x00000000006b05a4 in gdbarch_find_by_info (info=...) at ../../binutils-gdb/gdb/gdbarch.c:5269
#3 0x000000000060eee4 in gdbarch_update_p (info=...) at ../../binutils-gdb/gdb/arch-utils.c:557
#4 0x000000000060f8a8 in set_architecture (ignore_args=<optimized out>, from_tty=1, c=<optimized out>) at ../../binutils-gdb/gdb/arch-utils.c:531
#5 0x0000000000593d0b in do_set_command (arg=<optimized out>, arg@entry=0x20bee81 "rx ", from_tty=from_tty@entry=1, c=c@entry=0x20b1540)
at ../../binutils-gdb/gdb/cli/cli-setshow.c:455
#6 0x00000000007665c3 in execute_command (p=<optimized out>, p@entry=0x20bee70 "set architecture rx ", from_tty=1) at ../../binutils-gdb/gdb/top.c:666
#7 0x00000000006935f4 in command_handler (command=0x20bee70 "set architecture rx ") at ../../binutils-gdb/gdb/event-top.c:577
#8 0x00000000006938d8 in command_line_handler (rl=<optimized out>) at ../../binutils-gdb/gdb/event-top.c:767
#9 0x0000000000692c2c in gdb_rl_callback_handler (rl=0x20be7f0 "") at ../../binutils-gdb/gdb/event-top.c:200
The cause is that we want to access some builtin types in gdbarch init, but
it is not initialized yet. I fix it by creating the type when it is to be
used. We've already done this in sparc, sparc64 and m68k.
gdb:
2016-12-09 Yao Qi <yao.qi@linaro.org>
PR tdep/20954
* rx-tdep.c (rx_psw_type): New function.
(rx_fpsw_type): New function.
(rx_register_type): Call rx_psw_type and rx_fpsw_type.
(rx_gdbarch_init): Move code to rx_psw_type and
rx_fpsw_type.
gdb/testsuite:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* gdb.base/all-architectures.exp.in: Remove kfail for "rx".
I build GDB for all targets enabled. When I "set architecture rl78",
GDB crashes,
(gdb) set architecture rl78
Program received signal SIGSEGV, Segmentation fault.
append_flags_type_flag (type=0x20cc0e0, bitpos=bitpos@entry=0, name=name@entry=0x11dba3f "CY") at ../../binutils-gdb/gdb/gdbtypes.c:4926
4926 name);
(gdb) bt 10
#0 append_flags_type_flag (type=0x20cc0e0, bitpos=bitpos@entry=0, name=name@entry=0x11dba3f "CY") at ../../binutils-gdb/gdb/gdbtypes.c:4926
#1 0x00000000004aaca8 in rl78_gdbarch_init (info=..., arches=<optimized out>) at ../../binutils-gdb/gdb/rl78-tdep.c:1410
#2 0x00000000006b05a4 in gdbarch_find_by_info (info=...) at ../../binutils-gdb/gdb/gdbarch.c:5269
#3 0x000000000060eee4 in gdbarch_update_p (info=...) at ../../binutils-gdb/gdb/arch-utils.c:557
#4 0x000000000060f8a8 in set_architecture (ignore_args=<optimized out>, from_tty=1, c=<optimized out>) at ../../binutils-gdb/gdb/arch-utils.c:531
#5 0x0000000000593d0b in do_set_command (arg=<optimized out>, arg@entry=0x20be851 "rl78", from_tty=from_tty@entry=1, c=c@entry=0x20b1540)
at ../../binutils-gdb/gdb/cli/cli-setshow.c:455
#6 0x00000000007665c3 in execute_command (p=<optimized out>, p@entry=0x20be840 "set architecture rl78", from_tty=1) at ../../binutils-gdb/gdb/top.c:666
#7 0x00000000006935f4 in command_handler (command=0x20be840 "set architecture rl78") at ../../binutils-gdb/gdb/event-top.c:577
#8 0x00000000006938d8 in command_line_handler (rl=<optimized out>) at ../../binutils-gdb/gdb/event-top.c:767
#9 0x0000000000692c2c in gdb_rl_callback_handler (rl=0x20be890 "") at ../../binutils-gdb/gdb/event-top.c:200
The cause is that we want to access some builtin types in gdbarch init, but
it is not initialized yet. I fix it by creating the type when it is to be
used. We've already done this in sparc, sparc64 and m68k.
gdb:
2016-12-09 Yao Qi <yao.qi@linaro.org>
PR tdep/20953
* rl78-tdep.c (rl78_psw_type): New function.
(rl78_register_type): Call rl78_psw_type.
(rl78_gdbarch_init): Move code to rl78_psw_type.
gdb/testsuite:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* gdb.base/all-architectures.exp.in: Remove kfail for rl78.
This adds a test that exposes several problems fixed by earlier
patches:
#1 - Buffer overrun when host/target formats match, but sizes don't.
https://sourceware.org/ml/gdb-patches/2016-03/msg00125.html#2 - Missing handling for FR-V FR300.
https://sourceware.org/ml/gdb-patches/2016-03/msg00117.html#3 - BFD architectures with spaces in their names (v850).
https://sourceware.org/ml/binutils/2016-03/msg00108.html#4 - The OS ABI names with spaces issue.
https://sourceware.org/ml/gdb-patches/2016-03/msg00116.html#5 - Bogus HP/PA long double format.
https://sourceware.org/ml/gdb-patches/2016-03/msg00122.html#6 - Cris big endian internal error.
https://sourceware.org/ml/gdb-patches/2016-03/msg00126.html#7 - Several PowerPC bfd archs/machines not handled by gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=19797
And hopefully helps catch others in the future.
This started out as a test that simply did,
gdb -ex "print 1.0L"
to exercise #1 above.
Then to cover both 32-bit target / 64-bit host and the converse, I
thought of having the testcase print the floats twice, once with the
architecture set to "i386" and then to "i386:x86-64". This way it
wouldn't matter whether gdb was built as 32-bit or a 64-bit program.
Then I thought that other archs might have similar host/target
floatformat conversion issues as well. Instead of hardcoding some
architectures in the test file, I thought we could just iterate over
all bfd architectures and OS ABIs supported by the gdb build being
tested. This is what then exposed all the other problems listed
above...
With an --enable-targets=all, this exercises over 14 thousand
combinations. If left in a single test file, it all consistenly runs
in under a minute on my machine (An Intel i7-4810MQ @ 2.8 MHZ running
Fedora 23). Split in 8 chunks, as in this commit, it runs in around
25 seconds, with make -j8.
To avoid flooding the gdb.sum file, it avoids calling "pass" on each
tested combination/iteration. I'm explicitly not implementing that by
passing an empty message to gdb_test / gdb_test_multiple, because I
still want a FAIL to be logged in gdb.sum. So instead this puts the
internal passes in the gdb.log file, only, prefixed "IPASS:", for
internal pass. TBC, if some iteration fails, it'll still show up as
FAIL in gdb.sum. If this is an approach that takes on, I can see us
extending the common bits to support it for all testcases.
gdb/testsuite/ChangeLog:
2016-12-09 Pedro Alves <palves@redhat.com>
* gdb.base/all-architectures-0.exp: New file.
* gdb.base/all-architectures-1.exp: New file.
* gdb.base/all-architectures-2.exp: New file.
* gdb.base/all-architectures-3.exp: New file.
* gdb.base/all-architectures-4.exp: New file.
* gdb.base/all-architectures-5.exp: New file.
* gdb.base/all-architectures-6.exp: New file.
* gdb.base/all-architectures-7.exp: New file.
* gdb.base/all-architectures.exp.in: New file.
This patch change aarch prologue analyzer using code cache, in order
to improve the performance of remote debugging.
gdb.perf/skip-prologue.exp (measured by wall-time) is improved when
the program is compiled without debug information.
Original Patched Original Patched
without dbg without dbg with dbg with dbg
/ 11.1635239124 9.99472999573 9.65339517593 9.66648793221
-fstack-protector-all 11.2560930252 9.338118 9.63896489143 9.59474396706
gdb:
2016-12-9 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (instruction_reader::read): Call
read_code_unsigned_integer instead of
read_memory_unsigned_integer.
This patch change arm prologue analyzer using code cache, in order
to improve the performance of remote debugging.
gdb.perf/skip-prologue.exp (measured by wall-time) is improved a lot,
Original Patched Original Patched
without dbg without dbg with dbg with dbg
-marm 14.166741848 9.32852292061 11.4908499718 9.16302204132
-marm 14.6705040932 9.34849786758 18.2788009644 9.14823913574
\-fstack-protector-all
-mthumb 34.4391930103 10.6062178612 13.7886838913 10.3094120026
-mthumb
\-fstack-protector-all 34.9310460091 10.6413481236 25.3875930309 10.6294929981
gdb:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (skip_prologue_function): Call
read_code_unsigned_integer instead of
read_memory_unsigned_integer.
(thumb_analyze_prologue): Likewise.
(arm_analyze_load_stack_chk_guard): Likewise.
(arm_skip_stack_protector): Likewise.
(arm_analyze_prologue):Likewise.
(extend_buffer_earlier): Call target_read_code instead
of target_read_memory.
(arm_adjust_breakpoint_address): Likewise.
gdb.perf/skip-prologue.exp is intended to measure the performance of
skipping prologue with prologue analysis by setting breakpoints.
However, if program is compiled with debug info, GDB is smart to
skip prologue by line table from debug info, so prologue analysis
is not exercised at all.
This patch adds a parameter COMPILE to specify compiling with
debug information, otherwise, it is compiled without debug
information.
gdb/testsuite:
2016-12-09 Yao Qi <yao.qi@linaro.org>
* gdb.perf/skip-prologue.exp: Add parameter COMPILE.
For "info threads", we currently run into:
$ gdb/gdb -q -nw -nx --batch -ex start -ex info\ threads bfd/doc/chew
Temporary breakpoint 1 at 0x80486e0: file ../../../W._C._Handy/bfd/doc/chew.c, line 1535.
[New Thread 10656.5]
Thread 4 hit Temporary breakpoint 1, main (ac=1, av=0x102cd84) at ../../../W._C._Handy/bfd/doc/chew.c:1535
1535 {
Id Target Id Frame
1 bogus thread id 1 Can't fetch registers from thread bogus thread id 1: No such thread
Before commit e8032dde10,
gdb/thread.c:update_thread_list used to call prune_threads, after that change
it doesn't anymore, and we don't implement the to_update_thread_list target
method where the prune_threads call got moved. For now, apply a fix, related
to commit c82f56d9d7 "Hurd: Adjust to
startup-with-shell changes", which restores the previous behavior:
Id Target Id Frame
* 4 Thread 10688.4 main (ac=1, av=0x102cd84) at ../../../W._C._Handy/bfd/doc/chew.c:1535
5 Thread 10688.5 0x0106096c in ?? () from /lib/i386-gnu/libc.so.0.3
Not perfect, but at least better.
gdb/
* gnu-nat.c (gnu_create_inferior): After startup_inferior, call
prune_threads.
Complement commit dd8b7c222e ("MIPS: mips16e jalrc/jrc opcodes"),
<https://sourceware.org/ml/binutils/2005-07/msg00349.html>, and stop the
disassembler making a delay-slot adjustment for PC-relative operations
following either MIPS16e compact jumps, or undefined RR/J(AL)R(C)
encodings that have the `l' (link) and `ra' (source register is `ra')
bits set both at a time. Adjust code description for accuracy. Add a
suitable test case.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Avoid delay-slot
adjustment for PC-relative operations following MIPS16e compact
jumps or undefined RR/J(AL)R(C) encodings.
binutils/
* testsuite/binutils-all/mips/mips16-pcrel.d: New test.
* testsuite/binutils-all/mips/mips16-pcrel.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
Fix a commit a9752fdf83 ("[ARC] Sync cpu names with the ones accepted
by GCC.") build regression:
cc1: warnings being treated as errors
.../gas/config/tc-arc.c: In function 'arc_show_cpu_list':
.../gas/config/tc-arc.c:3452: error: declaration of 'spaces' shadows a global declaration
.../gas/../include/libiberty.h:248: error: shadowed declaration is here
make[4]: *** [tc-arc.o] Error 1
in a way following commit 91d6fa6a03 ("Add -Wshadow to the gcc command
line options used when compiling the binutils.").
gas/
* config/tc-arc.c (arc_show_cpu_list): Rename `spaces' local
variable to `space_buf'.
Fix a commit 008a97eff0 ("[GAS][ARM]Generate unpredictable warning for
pc used in data processing instructions with register-shifted register
operand.") build regression:
cc1: warnings being treated as errors
.../gas/config/tc-arm.c: In function 'encode_arm_shift':
.../gas/config/tc-arm.c:7439: error: declaration of 'index' shadows a global declaration
/usr/include/string.h:303: error: shadowed declaration is here
make[4]: *** [tc-arm.o] Error 1
in a way following commit 91d6fa6a03 ("Add -Wshadow to the gcc command
line options used when compiling the binutils.").
gas/
* config/tc-arm.c (encode_arm_shift): Rename `index' local
variable to `op_index'.
Fix a commit c2c4ff8d52 ("[AArch64] Add ARMv8.3 FCMLA and FCADD
instructions") build regression:
cc1: warnings being treated as errors
.../opcodes/aarch64-dis.c: In function 'aarch64_ext_sve_addr_rr_lsl':
.../opcodes/aarch64-dis.c:1324: error: declaration of 'index' shadows a global declaration
/usr/include/string.h:303: error: shadowed declaration is here
make[4]: *** [aarch64-asm.lo] Error 1
in a way following commit 91d6fa6a03 ("Add -Wshadow to the gcc command
line options used when compiling the binutils.").
opcodes/
* aarch64-asm.c (aarch64_ins_reglane): Rename `index' local
variable to `reglane_index'.
I got a report of a gdb crash for vle and further investigation showed an
attempt to disassemble an invalid memory range. I tracked the crash down
to the code in get_powerpc_dialect, where we fail to make sure we have a
valid section pointer before dereferencing it.
There is no such problem for rs6000-based disassembling.
opcodes/ChangeLog:
2016-12-08 Luis Machado <lgustavo@codesourcery.com>
* ppc-dis.c (get_powerpc_dialect): Check NULL info->section.
A branch in a non-exec section that needs a stub can lead to this
assertion.
* powerpc.cc (Powerpc_relobj::stub_table): Return NULL rather
then asserting.
Yury Norov
GDB Administrator
Cary Coutant
Renlin Li
Nick Clifton
Jim Wilson
Jiong Wang
Alan Modra
Nathan Sidwell
Yao Qi
Igor Kudrin
Maciej W. Rozycki
Pedro Alves
Thomas Schwinge
Luis Machado
Etienne Buira