* config/i386/obsd.mt: New file.
* i386bsd-nat.c (_initialize_i386bsd_nat): Introduce
i386obsd_sc_pc_offset and i386obsd_sc_sp_offset;
* i386obsd-nat.c (_initialize_i386obsd_nat): Set
i386obsd_sigtramp_start and i386obsd_sigtramp_end instead of
i386nbsd_sigtramp_start and i386nbsd_sigtramp_end.
* i386obsd-tdep.c: New file.
* configure.tgt (alpha*-*-freebsd*, i[3456]86-*-freebsd*,
sparc64-*-freebsd*): Combine to make *-*-freebsd* with gdb_target set
to fbsd. Removes need for additional freebsd tupples.
(i[3456]86-*-netbsd*): ...this. Set gdb_target to nbsd.
(i[3456]86-*-openbsd*): Make this a separate entry. Add a
comment noting that this needs its own target configuration.
* config/i386/nbsd.mt: New file.
* config/i386/nbsdaout.mt: Remove.
* config/i386/nbsdelf.mt: Ditto.
* config/i386/tm-nbsdaout.h: Ditto.
* config/ia64/ia64.mt: New file.
* config/alpha/alpha.mt: New file.
* MAINTAINERS: Change the alpha target to alpha-elf and IA-64 to
ia64-linux-gnu. Mention that ia64-elf is broken.
* configure.tgt: Add alpha*-*-* and ia64*-*-* patterns.
* config/ia64/ia64.mt: New file.
* config/alpha/alpha.mt: New file.
* MAINTAINERS: Change the alpha target to alpha-elf and IA-64 to
ia64-linux-gnu. Mention that ia64-elf is broken.
* configure.tgt: Add alpha*-*-* and ia64*-*-* patterns.
* configure.tgt: Make arc-*-* obsolete.
* NEWS: Mention that arc-*-* has been identifed as obsolete.
* MAINTAINERS: Make arc-elf obsolete.
* arc-tdep.c: Make file obsolete.
* config/arc/arc.mt: Ditto.
* config/arc/tm-arc.h: Ditto.
From Stan Shebs, Jim Blandy, Mark Salter, Kevin Buettner:
* config/frv/frv.mt: New file.
* config/frv/tm-frv.h: New file.
* configure.tgt: Support frv-*-*.
* Makefile.in (frv-tdep.o): New target.
* frv-tdep.c: New file.
* NEWS: Mention frv.
* configure.host (mips*-*-netbsd*): New host.
* configure.tgt (mips*-*-netbsd*): New target.
* mipsnbsd-nat.c: New file.
* mipsnbsd-tdep.c: New file.
* mipsnbsd-tdep.h: New file.
* config/mips/nbsd.mh: New file.
* config/mips/nbsd.mt: New file.
* config/mips/nm-nbsd.h: New file.
* config/mips/tm-nbsd.h: New file.
* configure.host: Set gdb_host_cpu to sh for all sh*.
(sh*-*-netbsdelf*): New host.
* configure.tgt: Set gdb_target_cpu to sh for all sh*.
(sh*-*-netbsdelf*): New target.
* sh-nbsd-nat.c: New file.
* sh-nbsd-tdep.c: New file.
* sh-nbsd-tdep.h: New file.
* config/sh/nbsd.mh: New file.
* config/sh/nbsd.mt: New file.
* config/sh/nm-nbsd.h: New file.
* config/sh/tm-nbsd.h: New file.
* gdbserver/acconfig.h: New file.
* gdbserver/i387-fp.c: New file.
* gdbserver/i387-fp.h: New file.
* gdbserver/linux-x86-64.c: New file.
* regformats/reg-x86-64.dat: New file.
* configure.tgt: Add x86_64-*-linux* gdbserver support.
& gdbserver/configure.srv: Add x86_64-*-linux* and regset support.
* gdbserver/configure.in: Add support for regsets.
* gdbserver/config.in: Regenerate.
* gdbserver/configure: Regenerate.
* gdbserver/Makefile.in: Likewise. Add $(linux_low_h).
* gdbserver/linux-low.h: New file.
* gdbserver/linux-low.c: Include "linux-low.h". Add support
for regsets.
* gdbserver/linux-arm-low.c: Include "linux-low.h".
* gdbserver/linux-ia64-low.c: Include "linux-low.h".
* gdbserver/linux-m68k-low.c: Include "linux-low.h".
* gdbserver/linux-mips-low.c: Include "linux-low.h".
* gdbserver/linux-ppc-low.c: Include "linux-low.h".
* gdbserver/linux-sh-low.c: Include "linux-low.h".
* gdbserver/linux-i386-low.c: Include "linux-low.h". Include
"i387-fp.h". Add PTRACE_GETREGS and friends.
* gdbserver/regcache.c (supply_register): New function.
(supply_register_by_name): New function.
(collect_register): New function.
(collect_register_by_name): New function.
* configure.tgt: Configure gdbserver only for known working
targets. Set ${build_gdbserver} instead of modifying ${configdirs}.
* configure.in: Check ${build_gdbserver}. Put gdbserver/ into
SUBDIRS if it is configured. Update comment for ${nativefile}.
* configure: Regenerated.
From Richard Earnshaw <rearnsha@arm.com>:
* config/arm/nbsd.mh, config/arm/nbsd.mt, config/arm/tm-nbsd.h,
config/arm/nm-nbsd.h, config/arm/xm-nbsd.h: New files.
* armbsd-nat.c: New file.
* Makefile.in: Build it.
* configure.host, configure.tgt: Support NetBSD/arm.
* config/mips/irix6.mh: New file.
* config/mips/irix6.mt: New file.
* config/mips/xm-irix6.h: New file.
* config/mips/nm-irix6.h: New file.
* mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
disassembler info in tm_print_insn_info as appropriate for the N32
ABI. Force N32 ABI to be the default if the CPU is R8000 or
R10000.
* configure.tgt (mips*-sgi-irix6*): Map to irix6.
* configure.host (mips*-sgi-irix6*): Ditto.
* configure.tgt: Recognize sparc64-*-linux* as a sp64linux target.
* configure.host: Recognize sparc64-*-linux* as a linux host.
From 2000-03-17 Jakub Jelinek <jakub@redhat.com>:
* config/sparc/tm-sp64linux.h: New file.
* configure.tgt: Recognize the 68hc11.
* m68hc11-tdep.c: New file for 68hc11 target.
* config/m68hc11/m68hc11.mt: New file for 68hc11 port.
* configure.tgt: When 68hc11, set gdb_multi_arch.
* config/i386/nbsdelf.mt: New file.
* config/i386/tm-nbsdelf.h: New file.
* config/i386/tm-nbsd.h: change include of tm-nbsd.h to
the more explicit config/tm-nbsd.h.
2000-04-20 Scott Bambrough <scottb@netwinder.org>
* arm-linux-nat.c (PIDGET, TIDGET): New.
(get_thread_id, GET_THREAD_ID): New.
(fetch_nwfpe_register, store_nwfpe_register): New.
(fetch_register, store_register): New.
(fetch_fpregister, store_fpregister): New.
(fill_gregset, supply_gregset): New.
(fill_fpregset, supply_fpregset): New.
(fetch_fpregs): Modified to use thread id's.
(store_fpregs): Modified to use thread id's and
fetch_nwfpe_register.
(fetch_regs): Modified to use thread id's.
(store_regs): Modified to use thread id's.
(fetch_inferior_registers): Modified to handle single register
fetches.
(store_inferior_registers): Modified to handle single register
stores.
(arm_linux_register_u_addr): Removed.
* configure.tgt: Added gdbserver to configdirs for arm*-*-linux*.
* config/arm/linux.mh
(NATDEPFILES): Removed core-aout.o. Added core-regset.o.
(LOADLIBES): Define.
* config/arm/nm-linux.h: Include config/nm-linux.h.
(ATTACH_DETACH): Removed. Defined in config/nm-linux.h.
(REGISTER_U_ADDR): Removed.
(SVR4_SHARED_LIBS): Removed. Defined in config/nm-linux.h.
(#include "solib.h"): Removed. Included via config/nm-linux.h.
* config/arm/tm-wince.h: New file.
* config/arm/wince.mt New file.
* config/sh/tm-wince.h: New file.
* config/sh/wince.mt New file.
* config/mips/tm-wince.h: New file.
* config/mips/wince.mt New file.
* wince.c: New file.
* wince-stub.c: New file.
* wince-stub.h: New file.
* sh-tdep.c: Use correct register names for Windows CE.
* configure.host, configure.tgt: Comment out Gould configs.
* Makefile.in: Comment out Gould-related actions.
* gould-xdep.c, gould-tdep.c, config/gould/*: Comment out.
* NEWS: Mention obsolete status.
And the first one bites the dust...
* config/m68k/tm-m68k.h (NUM_FREGS): m68k-linux patch.
Added NUM_FREGS macro.
* config/m68k/xm-linux.h: m68k-linux patch. New file.
* config/m68k/tm-linux.h: m68k-linux patch. New file.
* config/m68k/nm-linux.h: m68k-linux patch. New file.
* config/m68k/linux.mt: m68k-linux patch. New file.
* config/m68k/linux.mh: m68k-linux patch. New file.
* gdbserver/low-linux.c: m68k-linux patch. Added an ifdef
that checks the value of __GLIBC to decide whether or
not to include sys/reg.h.
* m68klinux-nat.c: m68k-linux patch. New file. Note
both m68k-tdep.c and m68klinux-nat.c contain definitions
for supply_gregset and supply_fpregset. The definitions
in m68k-tdep.c are valid is USE_PROC_FS is defined. Otherwise,
the definitions in m68klinux-nat.c will be used. This is a
bit of a hack. The supply_* routines do not belong in
*_tdep.c files. But, there are several lynx ports that currently
depend on these definitions.
* configure.tgt: m68k-linux patch. Added m68*-*-linux*
gdb_target.
* configure.host: m68k-linux patch. Added m68*-*-linux*
gdb_host.
* Makefile.in: m68k-linux patch. Added compile line for
m68klinux-nat.o
Changes to account for name change from cygwin32 to cygwin and
clean up Win32-related ifdefs.
* configure.tgt: check for cygwin* instead of cygwin32.
New cygwin gdb_target variable loses the "32".
* configure.host: check for cygwin* instead of cygwin32.
New cygwin gdb_host variable loses the "32".
* configure.in: test __CYGWIN__ instead of __CYGWIN32__,
rename gdb_cv_os_cygwin32 variable to drop the "32". Call
AM_EXEEXT instead of AC_EXEEXT since that isn't in a released
autoconf yet.
* configure: regenerate.
* main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h
where
cygwin path conv protos live, instead of adding a proto here
for
them here.
* {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__
instead of __CYGWIN32__.
* source.c: thoughout, check _WIN32 instead of WIN32.
* config/i386/cygwin32.mh: delete.
* config/i386/cygwin.mh: new file, was cygwin32.mh.
* config/i386/cygwin32.mt: delete.
* config/i386/cygwin.mt: new file, was cygwin32.mt.
* config/i386/tm-cygwin32.h: delete.
* config/i386/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/i386/xm-cygwin32.h: delete.
* config/i386/xm-cygwin.h: new file, was xm-cygwin32.h.
* config/i386/xm-windows.h: #include xm-cygwin.h now.
* config/powerpc/cygwin32.mh: delete.
* config/powerpc/cygwin.mh: new file, was cygwin32.mh.
* config/powerpc/cygwin32.mt: delete.
* config/powerpc/cygwin.mt: new file, was cygwin32.mt.
* config/powerpc/tm-cygwin32.h: delete.
* config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/powerpc/xm-cygwin32.h: delete.
* config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h.
* rdi-share/aclocal.m4: regenerate with aclocal.
* rdi-share/configure: regenerate with autoconf.
* rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c,
* serpardr.c,
unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__.
* configure.tgt: Switch over to use tm-4320.h. Since I switched to
MIPS EABI the fixes are no longer backward compatible with 4300.
* tm-vr4320.h: Added
* vr4320.mt: Added
recognition, no source files for these (note that the i386 Mach
is pre-Mach 3).
(mips*-*-mach3*, ns32k-*-mach3*): Fix file names.
* config/mips/mipsel64.mt: Remove, never referenced.
* config.sub: Create the vr4111 as a copy of vr4100.
gas--
* config/tc-mips.c (md_begin): Create the vr4111 as a copy of
the vr4100.
gcc--
* config.sub: Create the vr4111 as a copy of the vr4100.
* configure.in: Same.
* configure: Rebuild.
gdb--
* configure.tgt: Create the vr4111 as a copy of the vr4100.
In dwarf2read.c, if the ABI is 32 bit and 64 bit addresses are encountered
discard the most significant 32 bits.
Use CORE_ADDR for address variables instead of long.
Add more explicit tx49 configur target.
Check/use sigaction/SA_RESTART in remote-sim.c
source files.
* breakpoint.c (resolve_sal_pc): Prevent crash when pc isn't
associated with a function.
* buildsym.c (record_line start_symtab end_symtab): Don't delete
symtabs which only have line numbers (but no other debug symbols).
* dbxread.c (read_dbx_symtab end_psymtab): Ditto.
* remote-sim.c: New functions gdbsim_insert/remove_breakpoint. Use
intrinsic simulator breakpoints if available, otherwise do it the
hard way.
* configure.tgt: Add d30v.
* d30v-tdep.c: New file.
* config/d30v/d30v.mt, config/d30v/tm-d30v.h: New files.
(end_psymtab): Use MSYMBOL_SIZE to extract size from minimal symbol.
* elfread.c (elf_symtab_read): If ELF symbol is "special",
such as a MIPS16 function, mark minimal symbol as special too.
* mips-tdep.c (pc_is_mips16): New function to check whether
a function is MIPS16 by looking at the minimal symbol. Use
pc_is_mips16 throughout instead of IS_MIPS16_ADDR macro.
* config/mips/tm-mips.h (SYMBOL_IS_SPECIAL, MAKE_MSYMBOL_SPECIAL,
MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): New functions for setting/testing
"special" MIPS16 bit in ELF and minimal symbols.
* mdebugread.c (parse_partial_symbols): Don't construct a partial
symbol table for a file that already has one.
start-sanitize-tx19
* configure.tgt: Support TX19.
* config/mips/tm-tx19.h, config/mips/tm-tx19l.h, config/mips/tx19.mt,
config/mips/tx19l.mt: New files for TX19.
end-sanitize-tx19
* config/tic80/tic80.mt:
(GDBSERVER-DEPFILES, GDBSERVER_LIBS): Define for gdbserver.
(SIM): Remove -lm to prevent make errors.
* configure.tgt: add gdbserver to configdirs for tic80.
end-sanitize-tic80
* gdbserver/utils.c (error): Change prototype to match defs.h.
* gdbserver/low-sim.c: Change simulator calls to use new interface.
* remote.c (remote_write_bytes): Include '$' at start of packet
and checksum at end of packet in overhead calculation.
Andrew Cagney
Kevin Buettner
Mark Kettenis
David O'Brien
Jason Thorpe
Grace Sainsbury
Dave Brolley
Corinna Vinschen
Elena Zannoni
Theodore A. Roth
Daniel Jacobowitz
Richard Earnshaw
Alexandre Oliva
Andreas Jaeger
Orjan Friberg
Fernando Nasser
Eli Zaretskii
J.T. Conklin
Nick Clifton
Jeff Law
Stan Shebs
Scott Bambrough
Christopher Faylor
Jim Kingdon
Jason Molenda
Edith Epstein
Zdenek Radouch
Gavin Romig-Koch
Geoffrey Noer
Ken Raeburn
Ian Lance Taylor
Keith Seitz
Stan Cox
John Metzler
Doug Evans
Richard Henderson
Mark Alexander
Ron Unrau
Felix Lee
Stu Grossman
Michael Snyder