Commit Graph

21486 Commits

Author SHA1 Message Date
Yao Qi 6a5f844b29 Change the default implementation of to_traceframe_info to tcomplain
This patch is to change the default implementation of to_traceframe_info
from 'return NULL' to tcomplain, which is intended.  If new target
supports tracepoint, this method should be implemented, otherwise,
an error is thrown.

gdb:

2014-03-06  Yao Qi  <yao@codesourcery.com>

	* target.h (struct target_ops) <to_traceframe_info>: Use
	TARGET_DEFAULT_NORETURN (tcomplain ()).
	* target-delegates.c: Regenerated.
2014-03-06 09:39:50 +08:00
Pedro Alves 0f26cec1fd PR gdb/16575: stale breakpoint instructions in the code cache
In non-stop mode, or rather, breakpoints always-inserted mode, the
code cache can easily end up with stale breakpoint instructions:

All it takes is filling a cache line when breakpoints already exist in
that memory region, and then delete the breakpoint.

Vis. (from the new test):

 (gdb) set breakpoint always-inserted on
 (gdb) b 23
 Breakpoint 2 at 0x400540: file ../../../src/gdb/testsuite/gdb.base/breakpoint-shadow.c, line 23.
 (gdb) b 24
 Breakpoint 3 at 0x400547: file ../../../src/gdb/testsuite/gdb.base/breakpoint-shadow.c, line 24.
 disass main
 Dump of assembler code for function main:
    0x000000000040053c <+0>:     push   %rbp
    0x000000000040053d <+1>:     mov    %rsp,%rbp
 => 0x0000000000400540 <+4>:     movl   $0x1,-0x4(%rbp)
    0x0000000000400547 <+11>:    movl   $0x2,-0x4(%rbp)
    0x000000000040054e <+18>:    mov    $0x0,%eax
    0x0000000000400553 <+23>:    pop    %rbp
    0x0000000000400554 <+24>:    retq
 End of assembler dump.

So far so good.  Now flush the code cache:

 (gdb) set code-cache off
 (gdb) set code-cache on

Requesting a disassembly works as expected, breakpoint shadowing is
applied:

 (gdb) disass main
 Dump of assembler code for function main:
    0x000000000040053c <+0>:     push   %rbp
    0x000000000040053d <+1>:     mov    %rsp,%rbp
 => 0x0000000000400540 <+4>:     movl   $0x1,-0x4(%rbp)
    0x0000000000400547 <+11>:    movl   $0x2,-0x4(%rbp)
    0x000000000040054e <+18>:    mov    $0x0,%eax
    0x0000000000400553 <+23>:    pop    %rbp
    0x0000000000400554 <+24>:    retq
 End of assembler dump.

However, now delete the breakpoints:

 (gdb) delete
 Delete all breakpoints? (y or n) y

And disassembly shows the old breakpoint instructions:

 (gdb) disass main
 Dump of assembler code for function main:
    0x000000000040053c <+0>:     push   %rbp
    0x000000000040053d <+1>:     mov    %rsp,%rbp
 => 0x0000000000400540 <+4>:     int3
    0x0000000000400541 <+5>:     rex.RB cld
    0x0000000000400543 <+7>:     add    %eax,(%rax)
    0x0000000000400545 <+9>:     add    %al,(%rax)
    0x0000000000400547 <+11>:    int3
    0x0000000000400548 <+12>:    rex.RB cld
    0x000000000040054a <+14>:    add    (%rax),%al
    0x000000000040054c <+16>:    add    %al,(%rax)
    0x000000000040054e <+18>:    mov    $0x0,%eax
    0x0000000000400553 <+23>:    pop    %rbp
    0x0000000000400554 <+24>:    retq
 End of assembler dump.

Those breakpoint instructions are no longer installed in target memory
they're stale in the code cache.  Easily confirmed by just disabling
the code cache:

 (gdb) set code-cache off
 (gdb) disass main
 Dump of assembler code for function main:
    0x000000000040053c <+0>:     push   %rbp
    0x000000000040053d <+1>:     mov    %rsp,%rbp
 => 0x0000000000400540 <+4>:     movl   $0x1,-0x4(%rbp)
    0x0000000000400547 <+11>:    movl   $0x2,-0x4(%rbp)
    0x000000000040054e <+18>:    mov    $0x0,%eax
    0x0000000000400553 <+23>:    pop    %rbp
    0x0000000000400554 <+24>:    retq
 End of assembler dump.


I stumbled upon this when writing a patch to infrun.c, that made
handle_inferior_event & co fill in the cache before breakpoints were
removed from the target.  Recall that wait_for_inferior flushes the
dcache for every event.  So in that case, always-inserted mode was not
necessary to trigger this.  It's just a convenient way to expose the
issue.

The dcache works at the raw memory level.  We need to update it
whenever memory is written, no matter what kind of target memory
object was originally passed down by the caller.  The issue is that
the dcache update code isn't reached when a caller explicitly writes
raw memory.  Breakpoint insertion/removal is one such case --
mem-break.c uses target_write_read_memory/target_write_raw_memory.

The fix is to move the dcache update code from memory_xfer_partial_1
to raw_memory_xfer_partial so that it's always reachable.

When we do that, we can actually simplify a series of things.
memory_xfer_partial_1 no longer needs to handle writes for any kind of
memory object, and therefore dcache_xfer_memory no longer needs to
handle writes either.  So the latter (dcache_xfer_memory) and its
callees can be simplified to only care about reads.  While we're
touching dcache_xfer_memory's prototype, might as well rename it to
reflect that fact that it only handles reads, and make it follow the
new target_xfer_status/xfered_len style.  This made me notice that
dcache_xfer_memory loses the real error status if a memory read fails:
we could have failed to read due to TARGET_XFER_E_UNAVAILABLE, for
instance, but we always return TARGET_XFER_E_IO, hence the FIXME note.
I felt that fixing that fell out of the scope of this patch.

Currently dcache_xfer_memory handles the case of a write failing.  The
whole cache line is invalidated when that happens.  However,
dcache_update, the sole mechanism for handling writes that will remain
after the patch, does not presently handle that scenario.  That's a
bug.  The patch makes it handle that, by passing down the
target_xfer_status status from the caller, so that it can better
decide what to do itself.  While I was changing the function's
prototype, I constified the myaddr parameter, getting rid of the need
for the cast as seen in its existing caller.

Tested on x86_64 Fedora 17, native and gdbserver.

gdb/
2014-03-05  Pedro Alves  <palves@redhat.com>

	PR gdb/16575
	* dcache.c (dcache_poke_byte): Constify ptr parameter.  Return
	void.  Update comment.
	(dcache_xfer_memory): Delete.
	(dcache_read_memory_partial): New, based on the read bits of
	dcache_xfer_memory.
	(dcache_update): Add status parameter.  Use ULONGEST for len, and
	adjust.  Discard cache lines if the reason for the update was
	error.
	* dcache.h (dcache_xfer_memory): Delete declaration.
	(dcache_read_memory_partial): New declaration.
	(dcache_update): Update prototype.
	* target.c (raw_memory_xfer_partial): Update the dcache here.
	(memory_xfer_partial_1): Don't handle dcache writes here.

gdb/testsuite/
2014-03-05  Pedro Alves  <palves@redhat.com>

	PR gdb/16575
	* gdb.base/breakpoint-shadow.exp (compare_disassembly): New
	procedure.
	(top level): Adjust to use it.  Add tests that exercise breakpoint
	interaction with the code-cache.
2014-03-05 14:18:28 +00:00
Mike Frysinger b2b255bdf3 sim: constify prog_name
There's no need for the prog_name handed down to the core to be mutable,
so add const markings to it and all the related funcs.
2014-03-05 01:42:44 -05:00
Tom Tromey 5d9cf8a4d3 move probes to be per-bfd
This patch moves the probe data from the objfile to the per-BFD
object.  This lets the probes be shared between different inferiors
(and different objfiles when dlmopen is in use, should gdb ever handle
that).

2014-03-03  Tom Tromey  <tromey@redhat.com>

	* elfread.c (probe_key): Change to bfd_data.
	(elf_get_probes, probe_key_free, _initialize_elfread): Probes are
	now per-BFD, not per-objfile.
	* stap-probe.c (stap_probe_destroy): Update comment.
	(handle_stap_probe): Allocate on the per-BFD obstack.
2014-03-03 12:47:25 -07:00
Tom Tromey 729662a522 change probes to be program-space-independent
This changes the probes to be independent of the program space.

After this, when a probe's address is needed, it is determined by
applying offsets at the point of use.

This introduces a bound_probe object, similar to bound minimal
symbols.  Objects of this type are used when it's necessary to pass a
probe and its corresponding objfile.

This removes the backlink from probe to objfile, which was primarily
used to fetch the architecture to use.

This adds a get_probe_address function which calls a probe method to
compute the probe's relocated address.  Similarly, it adds an objfile
parameter to the semaphore methods so they can do the relocation
properly as well.

2014-03-03  Tom Tromey  <tromey@redhat.com>

	* break-catch-throw.c (fetch_probe_arguments): Use bound probes.
	* breakpoint.c (create_longjmp_master_breakpoint): Use
	get_probe_address.
	(add_location_to_breakpoint, bkpt_probe_insert_location)
	(bkpt_probe_remove_location): Update.
	* breakpoint.h (struct bp_location) <probe>: Now a bound_probe.
	* elfread.c (elf_symfile_relocate_probe): Remove.
	(elf_probe_fns): Update.
	(insert_exception_resume_breakpoint): Change type of "probe"
	parameter to bound_probe.
	(check_exception_resume): Update.
	* objfiles.c (objfile_relocate1): Don't relocate probes.
	* probe.c (bound_probe_s): New typedef.
	(parse_probes): Use get_probe_address.  Set sal's objfile.
	(find_probe_by_pc): Return a bound_probe.
	(collect_probes): Return a VEC(bound_probe_s).
	(compare_probes): Update.
	(gen_ui_out_table_header_info): Change type of "probes"
	parameter.  Update.
	(info_probes_for_ops): Update.
	(get_probe_address): New function.
	(probe_safe_evaluate_at_pc): Update.
	* probe.h (struct probe_ops) <get_probe_address>: New field.
	<set_semaphore, clear_semaphore>: Add objfile parameter.
	(struct probe) <objfile>: Remove field.
	<arch>: New field.
	<address>: Update comment.
	(struct bound_probe): New.
	(find_probe_by_pc): Return a bound_probe.
	(get_probe_address): Declare.
	* solib-svr4.c (struct probe_and_action) <address>: New field.
	(hash_probe_and_action, equal_probe_and_action): Update.
	(register_solib_event_probe): Add address parameter.
	(solib_event_probe_at): Update.
	(svr4_create_probe_breakpoints): Add objfile parameter.  Use
	get_probe_address.
	* stap-probe.c (struct stap_probe) <sem_addr>: Update comment.
	(stap_get_probe_address): New function.
	(stap_can_evaluate_probe_arguments, compute_probe_arg)
	(compile_probe_arg): Update.
	(stap_set_semaphore, stap_clear_semaphore): Compute semaphore's
	address.
	(handle_stap_probe): Don't relocate the probe.
	(stap_relocate): Remove.
	(stap_gen_info_probes_table_values): Update.
	(stap_probe_ops): Remove stap_relocate.
	* symfile-debug.c (debug_sym_relocate_probe): Remove.
	(debug_sym_probe_fns): Update.
	* symfile.h (struct sym_probe_fns) <sym_relocate_probe>: Remove.
	* symtab.c (init_sal): Use memset.
	* symtab.h (struct symtab_and_line) <objfile>: New field.
	* tracepoint.c (start_tracing, stop_tracing): Update.
2014-03-03 12:47:20 -07:00
Tom Tromey ff8879201a comment fixes
This fixes up a few mildly erroneous comments in probe.h.

2014-03-03  Tom Tromey  <tromey@redhat.com>

	* probe.h (parse_probes, find_probe_by_pc)
	(find_probes_in_objfile): Fix comments.
2014-03-03 12:36:43 -07:00
Doug Evans f0407826d9 * infrun.c (handle_signal_stop): Replace test for
TARGET_WAITKIND_STOPPED with an assert.
2014-03-02 16:51:35 -05:00
Doug Evans 35e6a7111e guile/scm-objfile.c (ofscm_mark_objfile_smob): Fix typo in comment. 2014-03-02 10:30:46 -08:00
Doug Evans 667f9d0bdd guile/lib/gdb/printing.scm (append-pretty-printer!): Fix thinko. 2014-03-02 09:17:46 -08:00
Mark Kettenis dc92ace053 Silence ARI warning.
gdb/ChangeLog:

        * obsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
2014-03-01 17:13:47 +01:00
Mark Kettenis a900370fa1 Enable rhreads support on OpenBSD/i386.
gdb/ChangeLog:

        * i386obsd-nat.c: Include "obsd-nat.h".
        (_initialize_i386obsd_nat): Call obsd_add_target instead of
        add_target.
        * config/i386/obsd.mh (NATDEPFILES): Add obsd-nat.o.
2014-03-01 15:29:34 +01:00
Mark Kettenis b72a79813d Eliminate pointer signedness warning.
gdb/ChangeLog:

        * i386obsd-nat.c (i386obsd_supply_pcb): Cast 'sf' to 'gdb_byte *'.
2014-03-01 13:10:32 +01:00
Mark Kettenis 8fd408f130 Fix ChangeLog. 2014-03-01 12:03:30 +01:00
Mark Kettenis 96c70abaef Enable rthreads support on OpenBSD/mips64.
gdb/ChangeLog:

        * mips64obsd-nat.c: Include "obsd-nath".
        (_initialize_mips64obsd_nat): Call obsd_add_target instead of
        add_target
        * config/mips/obsd64.mh (NATDEPFILES): Add obsd-nat.o.
2014-03-01 12:00:19 +01:00
Mark Kettenis 874a80af9f Enable rthreads support on OpenBSD/amd64.
gdb/ChangeLog:

        * amd64obsd-nat.c (_initialize_amd64obsd_nat): Call
        obsd_add_target instead of add_target.
        * config/i386/obsd64.mh (NATDEPFILES): Add obsd-nat.o.
2014-03-01 11:49:58 +01:00
Siva Chandra 9cf953733a Remove the unnecesary argument METHOD to valops.c:find_oload_champ.
* valops.c (find_oload_champ): Remove unneccesary argument METHOD.
	(find_overload_match): Update call to find_oload_champ.
	(find_oload_champ_namespace_loop): Likewise
2014-02-28 15:03:22 -08:00
Mark Kettenis 025cac40e2 Add sparc64obsd-nat.c to ALLDEPFILES.
gdb/ChangeLog:

        * Makefile.in (ALLDEPFILES): Add sparc64obsd-nat.c.
2014-02-28 23:23:40 +01:00
Mark Kettenis 1ed586ce1d Enable rthreads supports on OpenBSD/sparc64.
gdb/ChangeLog:

        * configure.host (sparc64-*-openbsd*): Set gdb_host to obsd64.
        * config/sparc/obsd64.mh: New file.
        * sparc64obsd-nat.c: New file.
2014-02-28 23:07:55 +01:00
Mark Kettenis 863e4da4b6 Support rthreads on OpenBSD 5.2 and later.
OpenBSD 5.2 and later have a proper threads implementation based on
kernel threads.  Debugging support is provided through additional
ptrace(2) requests, so this diff extends the generic code in
inf-ptrace.c with OpenBSD-specific code to discover additional threads.

gdb/ChangeLog:

        * obsd-nat.h: New file.
        * obsd-nat.c: New file.
        * Makefile.in (HFILES_NO_SRCDIR): Add obsd-nat.h.
        (ALLDEPFILES): Add obsd-nat.c.
2014-02-28 22:45:51 +01:00
Tom Tromey 89de4da46b constify ui_out_impl
This patch constifies ui_out_impl in struct ui_out, and various
instances of ui_out_impl.

This removes a couple of FIXME comments (near cli_ui_out_impl and
mi_ui_out_impl) that did not make sense to me.

Tested by rebuilding.

2014-02-28  Tom Tromey  <tromey@redhat.com>

	* cli-out.c (cli_ui_out_impl): Now const.  Remove comment.
	* cli-out.h (cli_ui_out_impl): Now const.
	* mi/mi-out.c (mi_ui_out_impl): Now const.  Remove comment.
	* ui-out.c (struct ui_out) <impl>: Now const.
	(default_ui_out_impl): Now const.
	(ui_out_new): Make 'impl' parameter const.
	* ui-out.h (ui_out_new): Update.
2014-02-28 08:51:15 -07:00
Mark Kettenis c725e7b687 Prevent compiler warning.
GCC 4.2.1 complains about first_l_name may be used uninitialized, and my brain
agrees.

gdb/ChangeLog:

        * solib-svr4.c (svr4_read_so_list): Initialize first_l_name to 0.
2014-02-27 21:51:08 +01:00
Mark Kettenis 670b46b3a9 StackGhost cookie is per-process.
gdb/ChangeLog:

        * sparc-nat.c (sparc_xfer_wcookie): Always use process ID.
2014-02-27 21:22:29 +01:00
Jan Kratochvil c91550fc5d Additional PR 8882 fix.
runtest gdb.base/corefile.exp

==23174== ERROR: AddressSanitizer: heap-use-after-free on address 0x604400008c88 at pc 0x68f0be bp 0x7fffae9d7490 sp
0x7fffae9d7480
READ of size 8 at 0x604400008c88 thread T0
    #0 0x68f0bd in svr4_read_so_list (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x68f0bd)
    #1 0x68f64e in svr4_current_sos_direct (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x68f64e)
    #2 0x68f757 in svr4_current_sos (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x68f757)
    #3 0xcebbff in update_solib_list (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0xcebbff)
0x604400008c88 is located 8 bytes inside of 1104-byte region [0x604400008c80,0x6044000090d0)
freed by thread T0 here:
    #0 0x7f52677500f9 (/lib64/libasan.so.0+0x160f9)
    #1 0xd2c68a in xfree (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0xd2c68a)
    #2 0xceb364 in free_so (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0xceb364)
    #3 0xca59f8 in do_free_so (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0xca59f8)
    #4 0x93432a in do_my_cleanups (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x93432a)
    #5 0x934406 in do_cleanups (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x934406)
    #6 0x68efa9 in svr4_read_so_list (/home/jkratoch/redhat/gdb-clean/gdb/gdb+0x68efa9)

I did not notice it during my review in:
	Re: [PATCH v2] Skip vDSO when reading SO list (PR 8882)
	https://sourceware.org/ml/gdb-patches/2013-09/msg00888.html

gdb/
2014-02-27  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Additional PR 8882 fix.
	* solib-svr4.c (svr4_read_so_list): Change first to first_l_name.

Message-ID: <20140226220918.GA10431@host2.jankratochvil.net>
2014-02-27 21:16:04 +01:00
Pedro Alves 2fa0369e51 Linux waitpid/__WALL emulation wrapper: If WNOHANG is set, don't touch sigprocmask.
Just a small optimization.  No need to block/unblock signals if we're
not going to call sigsuspend.

gdb/
2014-02-27  Pedro Alves  <palves@redhat.com>

	* nat/linux-waitpid.c (my_waitpid): Only block signals if WNOHANG
	isn't set.
2014-02-27 14:44:16 +00:00
Pedro Alves d632a0971c Move linux-nat.c:status_to_str to nat/linux-waitpid.c.
So that gdbserver's Linux backend can use it too.

gdb/
2014-02-27  Pedro Alves  <palves@redhat.com>

	PR 12702
	* linux-nat.c (status_to_str): Moved to nat/linux-waitpid.c.
	* nat/linux-waitpid.c: Include string.h.
	(status_to_str): Moved here and made extern.
	* nat/linux-waitpid.h (status_to_str): New declaration.
2014-02-27 14:30:08 +00:00
Hui Zhu 2ebd5a3520 Move ptid_match to common/ptid.c.
So that gdbserver can use it too.

gdb/
2014-02-27  Hui Zhu  <hui@codesourcery.com>

	PR 12702
	* infrun.c (ptid_match): Move ...
	* common/ptid.c (ptid_match): ... here.
	* inferior.h (ptid_match): Move ...
	* common/ptid.h (ptid_match): ... here.
2014-02-27 14:30:07 +00:00
Mark Kettenis 3cdd631f17 Call common OpenBSD ABI init code on OpenBSD/mips64.
* mips64obsd-tdep.c (mips64obsd_init_abi): Call obsd_init_abi.
        * configure.tgt (mips64*-*-openbsd*): Add obsd-tdep.c to
        gdb_target_obs.
2014-02-27 14:07:10 +01:00
Mark Kettenis bee30a640c Add gdbarch auxv parsing for OpenBSD.
gdb/Changelog:

        * obsd-tdep.c (obsd_auxv_parse): New function.
        (obsd_init_abi): Set auxv_parse.
2014-02-27 13:47:00 +01:00
Mark Kettenis 27a48a9223 Add auxv parsing to the architecture vector.
Necessary to fix parsing auxv entries from core files on systems that use
the layout specified by ELF instead of the incompatible variant used by Linux.

gdb/Changelog:

        * gdbarch.sh (auxv_parse): New.
        * gdbarch.h: Regenerated.
        * gdbarch.c: Regenerated.
        * auxv.c (target_auxv_parse): Call gdbarch_parse_auxv if provided.
2014-02-27 13:40:15 +01:00
Ludovic Courtès 7a5a839f3a guile: Add 'history-append!' procedure.
gdb/
2014-02-26  Ludovic Courtès  <ludo@gnu.org>

	* guile/scm-value.c (gdbscm_history_append_x): New function.
	(value_functions): Add it.

gdb/testsuite/
2014-02-26  Ludovic Courtès  <ludo@gnu.org>

	* gdb.guile/scm-value.exp (test_value_in_inferior): Add
	test for 'history-append!'.

gdb/doc/
2014-02-26  Ludovic Courtès  <ludo@gnu.org>

	* gdb/doc/guile.texi (Basic Guile): Document 'history-append!'.
2014-02-26 22:59:42 +01:00
Joel Brobecker 31aa7e4ee9 DWARF: Read constant-class addresses correctly
Starting with DWARF version 4, the description of the DW_AT_high_pc
attribute was amended to say:

   if it is of class constant, the value is an unsigned integer offset
   which when added to the low PC gives the address of the first
   location past the last instruction associated with the entity.

A change was made in Apr 27th, 2012 to reflect that change:

  | commit 91da14142c
  | Author: Mark Wielaard <mjw@redhat.com>
  | Date:   Fri Apr 27 18:55:19 2012 +0000
  |
  |     * dwarf2read.c (dwarf2_get_pc_bounds): Check DW_AT_high_pc form to
  |     see whether it is an address or a constant offset from DW_AT_low_pc.
  |     (dwarf2_record_block_ranges): Likewise.
  |     (read_partial_die): Likewise.

Unfortunately, this new interpretation is now used regardless of
the CU's DWARF version. It turns out that one of WindRiver's compilers
(FTR: Diabdata 4.4) is generating DWARF version 2 info with
DW_AT_high_pc attributes improperly using the data4 form. Because of
that, we miscompute all high PCs incorrectly. This leads to a lot of
symtabs having overlapping ranges, which in turn causes havoc in
pc-to-symtab-and-line translations.

One visible effect is when inserting a breakpoint on a given function:

    (gdb) b world
    Breakpoint 1 at 0x4005c4

The source location of the breakpoint is missing. The output should be:

    (gdb) b world
    Breakpoint 1 at 0x4005c8: file dw2-rel-hi-pc-world.c, line 24.

What happens in this case is that the pc-to-SAL translation first
starts be trying to find the symtab associated to our PC using
each symtab's ranges. Because of the high_pc miscomputation,
many symtabs end up matching, and the heuristic trying to select
the most probable one unfortunately returns one that is unrelated
(it really had no change in this case to do any better). Once we
have the wrong symtab, the start searching the associated linetable,
where the addresses are correct, thus finding no match, and therefore
no SAL.

This patch is an attempt at handling the situation as gracefully
as we can, without guarantees.  It introduces a new function
"attr_value_as_address" which uses the correct accessor for getting
the value of a given attribute.  It then adjust the code throughout
this unit to use this function instead of assuming that addresses always
have the DW_FORM_addr format.

It also fixes the original issue of miscomputing the high_pc
by limiting the new interpretation of constant form DW_AT_high_pc
attributes to units using DWARF version 4 or later.

gdb/ChangeLog:

        * dwarf2read.c (attr_value_as_address): New function.
        (dwarf2_find_base_address, read_call_site_scope): Use
        attr_value_as_address in place of DW_ADDR.
        (dwarf2_get_pc_bounds): Use attr_value_as_address to get
        the low and high addresses.  Slight rework of the handling
        of the high pc being a constant form, and limit it to
        DWARF verson 4 or higher.
        (dwarf2_record_block_ranges): Likewise.
        (read_partial_die): Likewise.
        (new_symbol_full): Use attr_value_as_address in place of DW_ADDR.

gdb/testsuite/ChangeLog:

        * gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
        * gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
        * gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
        * gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
        * gdb.dwarf2/dw2-abs-hi-pc.c: New file.
        * gdb.dwarf2/dw2-abs-hi-pc.exp: New file.

Tested on x86_64-linux.
2014-02-26 11:43:23 -08:00
Tom Tromey 9b333ba340 make "file" use the BFD cache better
Right now the "file" command will discard the exec_bfd and then
possibly open a new one.

If this ends up reopening the same file, it can cause needless work by
gdb -- destroying all the per-BFD data just to re-read it again.

This patch changes the code to hold a reference to the old exec_bfd
while opening the new one.

The possible downside of this is a higher peak memory use.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* exec.c (exec_file_attach): Hold a reference to exec_bfd.
2014-02-26 12:11:18 -07:00
Tom Tromey 5f6cac4085 add short-circuit logic to elfread.c
If minimal symbols have already been read into a per-BFD object, then
a symbol reader can skip re-reading them.  This changes the ELF reader
to do so.

We only skip the work if the file is ELF+DWARF.  If it has stabs or
mdebug sections, then I think extra information is computed during the
minsym creation pass; and so we must still repeat it.  Eventually even
this will go away, once all symbol types have switched to being
progspace-independent.  In the meantime this has no negative effect --
it is just a missing optimization for a small set of users.

This change also required a somewhat non-obvious change to the OBJSTAT
accounting code.  If a symbol reader skips re-reading minimal symbols,
then the corresponding OBJSTAT will not be updated.  This leads to a
test failure in gdb.base/maint.exp.

To fix this, I've moved the needed stat field out of objfile and into
the per-BFD object.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* elfread.c (elf_read_minimal_symbols): Return early if
	minimal symbols have already been read.  Add "ei" parameter.
	(elf_symfile_read): Call elf_read_minimal_symbols earlier.
	* minsyms.c (prim_record_minimal_symbol_full): Update.
	* objfiles.h (struct objstats) <n_minsyms>: Move...
	(struct objfile_per_bfd_storage) <n_minsyms>: ... here.
	* symmisc.c (print_objfile_statistics): Update.
2014-02-26 12:11:18 -07:00
Tom Tromey 2750ef2799 split out elf_read_minimal_symbols
This is just a simple refactoring in elfread.c to split out the
minsym-reading code into its own function.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* elfread.c (elf_read_minimal_symbols): New function, from
	elf_symfile_read.
	(elf_symfile_read): Call it.
2014-02-26 12:11:18 -07:00
Tom Tromey 34643a32c6 move minimal symbols to per-bfd
Now that minimal symbols are independent of the program space, we can
move them to the per-BFD object.  This lets us save memory in the
multi-inferior case; and, once the symbol readers are updated, time.

The other prerequisite for this move is that all the objects referred
to by the minimal symbols have a lifetime at least as long as the
per-BFD object.  I think this is satisfied partially by this patch
(moving the copied names there) and partially by earlier patches
moving the demangled name hash.

This patch contains a bit of logic to avoid creating new minimal
symbols if they have already been read for a given BFD.  This allows
us to avoid trying to update all the symbol readers for this
condition.  At first glance this may seem like a hack, but some symbol
readers mix psym and minsym reading, and would require logic just like
this regardless -- and it is simpler and less error-prone to just do
the work in a central spot.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* minsyms.c (lookup_minimal_symbol, iterate_over_minimal_symbols)
	(lookup_minimal_symbol_text, lookup_minimal_symbol_by_pc_name)
	(lookup_minimal_symbol_solib_trampoline)
	(lookup_minimal_symbol_by_pc_section_1)
	(lookup_minimal_symbol_and_objfile): Update.
	(prim_record_minimal_symbol_full): Use the per-BFD obstack.
	Don't allocate a minimal symbol if minsyms have already been read.
	(build_minimal_symbol_hash_tables): Update.
	(install_minimal_symbols): Do nothing if minsyms already read.
	Use the per-BFD obstack.
	(terminate_minimal_symbol_table): Use the per-BFD obstack.
	* objfiles.c (allocate_objfile): Call
	terminate_minimal_symbol_table later.
	(have_minimal_symbols): Update.
	* objfiles.h (struct objfile_per_bfd_storage) <msymbols,
	minimal_symbol_count, msymbol_hash, msymbol_demangled_hash>:
	Move from struct objfile.
	<minsyms_read>: New field.
	(struct objfile) <msymbols, minimal_symbol_count,
	msymbol_hash, msymbol_demangled_hash>: Move.
	(ALL_OBJFILE_MSYMBOLS): Update.
	* symfile.c (read_symbols): Set minsyms_read.
	(reread_symbols): Update.
	* symmisc.c (dump_objfile, dump_msymbols): Update.
2014-02-26 12:11:17 -07:00
Tom Tromey 2273f0ac95 change minsyms not to be relocated at read-time
This removes the runtime offsets from minsyms.  Instead, these offsets
will now be applied whenever the minsym's address is computed.

This patch redefines MSYMBOL_VALUE_ADDRESS to actually use the offsets
from the given objfile.  Then, it updates all the symbol readers,
changing them so that they do not add in the section offset when
creating the symbol.

This change also lets us remove relocation of minsyms from
objfile_relocate1 and also msymbols_sort.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* minsyms.c (msymbols_sort): Remove.
	* minsyms.h (msymbols_sort): Remove.
	* objfiles.c (objfile_relocate1): Don't relocate minsyms.
	* symtab.h (MSYMBOL_VALUE_ADDRESS): Use objfile offsets.
	* elfread.c (elf_symtab_read): Don't add section offsets.
	* xcoffread.c (record_minimal_symbol): Don't add section offset
	to minimal symbol address.
	* somread.c (text_offset, data_offset): Remove.
	(som_symtab_read): Don't add section offsets to minimal symbol
	addresses.
	* coff-pe-read.c (add_pe_forwarded_sym, read_pe_exported_syms):
	Don't add section offsets to minimal symbols.
	* coffread.c (coff_symtab_read): Don't add section offsets
	to minimal symbol addresses.
	* machoread.c (macho_symtab_add_minsym): Don't add section offset
	to minimal symbol addresses.
	* mipsread.c (read_alphacoff_dynamic_symtab): Don't add
	section offset to minimal symbol addresses.
	* mdebugread.c (parse_partial_symbols): Don't add section
	offset to minimal symbol addresses.
	* dbxread.c (read_dbx_dynamic_symtab): Don't add section
	offset to minimal symbol addresses.
2014-02-26 12:11:17 -07:00
Tom Tromey 77e371c079 start change to progspace independence
This patch starts changing minimal symbols to be independent of the
program space.

Specifically, it adds a new objfile parameter to MSYMBOL_VALUE_ADDRESS
and changes all the code to use it.  This is needed so we can change
gdb to apply the section offset when a minsym's address is computed,
as opposed to baking the offsets into the symbol itself.

A few spots still need the unrelocated address.  For these, we
introduce MSYMBOL_VALUE_RAW_ADDRESS.

As a convenience, we also add the new macro BMSYMBOL_VALUE_ADDRESS,
which computes the address of a bound minimal symbol.  This just does
the obvious thing with the fields.

Note that this change does not actually enable program space
independence.  That requires more changes to gdb.  However, to ensure
that these changes compile properly, this patch does add the needed
section lookup code to MSYMBOL_VALUE_ADDRESS -- it just ensures it has
no effect at runtime by multiplying the offset by 0.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* ada-lang.c (ada_main_name): Update.
	(ada_add_standard_exceptions): Update.
	* ada-tasks.c (ada_tasks_inferior_data_sniffer): Update.
	* aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
	* arm-tdep.c (skip_prologue_function, arm_skip_stub): Update.
	* auxv.c (ld_so_xfer_auxv): Update.
	* avr-tdep.c (avr_scan_prologue): Update.
	* ax-gdb.c (gen_var_ref): Update.
	* blockframe.c (get_pc_function_start)
	(find_pc_partial_function_gnu_ifunc): Update.
	* breakpoint.c (create_overlay_event_breakpoint)
	(create_longjmp_master_breakpoint)
	(create_std_terminate_master_breakpoint)
	(create_exception_master_breakpoint): Update.
	* bsd-uthread.c (bsd_uthread_lookup_address): Update.
	* c-valprint.c (c_val_print): Update.
	* coff-pe-read.c (add_pe_forwarded_sym): Update.
	* common/agent.c (agent_look_up_symbols): Update.
	* dbxread.c (find_stab_function_addr, end_psymtab): Update.
	* dwarf2loc.c (call_site_to_target_addr): Update.
	* dwarf2read.c (dw2_find_pc_sect_symtab): Update.
	* elfread.c (elf_gnu_ifunc_record_cache)
	(elf_gnu_ifunc_resolve_by_got): Update.
	* findvar.c (default_read_var_value): Update.
	* frame.c (inside_main_func): Update.
	* frv-tdep.c (frv_frame_this_id): Update.
	* glibc-tdep.c (glibc_skip_solib_resolver): Update.
	* gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline):
	Update.
	* hppa-hpux-tdep.c (hppa64_hpux_search_dummy_call_sequence)
	(hppa_hpux_find_dummy_bpaddr): Update.
	* hppa-tdep.c (hppa_symbol_address): Update.
	* infcmd.c (until_next_command): Update.
	* jit.c (jit_read_descriptor, jit_breakpoint_re_set_internal):
	Update.
	* linespec.c (minsym_found, add_minsym): Update.
	* linux-nat.c (get_signo): Update.
	* linux-thread-db.c (inferior_has_bug): Update.
	* m32c-tdep.c (m32c_return_value)
	(m32c_m16c_address_to_pointer): Update.
	* m32r-tdep.c (m32r_frame_this_id): Update.
	* m68hc11-tdep.c (m68hc11_get_register_info): Update.
	* machoread.c (macho_resolve_oso_sym_with_minsym): Update.
	* maint.c (maintenance_translate_address): Update.
	* minsyms.c (lookup_minimal_symbol_by_pc_name): Update.
	(frob_address): New function.
	(lookup_minimal_symbol_by_pc_section_1): Use raw addresses,
	frob_address.  Rename parameter to "pc_in".
	(compare_minimal_symbols, compact_minimal_symbols): Use raw
	addresses.
	(find_solib_trampoline_target, minimal_symbol_upper_bound):
	Update.
	* mips-linux-tdep.c (mips_linux_skip_resolver): Update.
	* mips-tdep.c (mips_skip_pic_trampoline_code): Update.
	* objc-lang.c (find_objc_msgsend): Update.
	* objfiles.c (objfile_relocate1): Update.
	* obsd-tdep.c (obsd_skip_solib_resolver): Update.
	* p-valprint.c (pascal_val_print): Update.
	* parse.c (write_exp_msymbol): Update.
	* ppc-linux-tdep.c (ppc_linux_spe_context_lookup)
	(ppc_elfv2_skip_entrypoint): Update.
	* ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
	* printcmd.c (build_address_symbolic, msym_info)
	(address_info): Update.
	* proc-service.c (ps_pglobal_lookup): Update.
	* psymtab.c (find_pc_sect_psymtab_closer)
	(find_pc_sect_psymtab, find_pc_sect_symtab_from_partial):
	Change msymbol parameter to bound_minimal_symbol.
	* ravenscar-thread.c (get_running_thread_id): Update.
	* remote.c (remote_check_symbols): Update.
	* sh64-tdep.c (sh64_elf_make_msymbol_special): Use raw
	address.
	* sol2-tdep.c (sol2_skip_solib_resolver): Update.
	* solib-dsbt.c (lm_base): Update.
	* solib-frv.c (lm_base, main_got): Update.
	* solib-irix.c (locate_base): Update.
	* solib-som.c (som_solib_create_inferior_hook)
	(link_map_start): Update.
	* solib-spu.c (spu_enable_break, ocl_enable_break): Update.
	* solib-svr4.c (elf_locate_base, enable_break): Update.
	* spu-tdep.c (spu_get_overlay_table, spu_catch_start)
	(flush_ea_cache): Update.
	* stabsread.c (define_symbol, scan_file_globals): Update.
	* stack.c (find_frame_funname): Update.
	* symfile-debug.c (debug_qf_expand_symtabs_matching)
	(debug_qf_find_pc_sect_symtab): Update.
	* symfile.c (simple_read_overlay_table)
	(simple_overlay_update): Update.
	* symfile.h (struct quick_symbol_functions)
	<find_pc_sect_symtab>: Change type of msymbol to
	bound_minimal_symbol.
	* symmisc.c (dump_msymbols): Update.
	* symtab.c (find_pc_sect_symtab_via_partial)
	(find_pc_sect_psymtab, find_pc_sect_line, skip_prologue_sal)
	(search_symbols, print_msymbol_info): Update.
	* symtab.h (MSYMBOL_VALUE_RAW_ADDRESS): New macro.
	(MSYMBOL_VALUE_ADDRESS): Redefine.
	(BMSYMBOL_VALUE_ADDRESS): New macro.
	* tracepoint.c (scope_info): Update.
	* tui/tui-disasm.c (tui_find_disassembly_address)
	(tui_get_begin_asm_address): Update.
	* valops.c (find_function_in_inferior): Update.
	* value.c (value_static_field, value_fn_field): Update.
2014-02-26 12:11:17 -07:00
Tom Tromey 3b7344d5ab use bound_minsym as result for lookup_minimal_symbol et al
This patch changes a few minimal symbol lookup functions to return a
bound_minimal_symbol rather than a pointer to the minsym.  This change
helps prepare gdb for computing a minimal symbol's address at the
point of use.

Note that this changes even those functions that ostensibly search a
single objfile.  That was necessary because, in fact, those functions
can search an objfile and its separate debug objfiles; and it is
important for the caller to know in which objfile the minimal symbol
was actually found.

The bulk of this patch is mechanical.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* ada-lang.c (ada_update_initial_language): Update.
	(ada_main_name, ada_has_this_exception_support): Update.
	* ada-tasks.c (ada_tasks_inferior_data_sniffer): Update.
	* aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
	* arm-tdep.c (arm_skip_stub): Update.
	* auxv.c (ld_so_xfer_auxv): Update.
	* avr-tdep.c (avr_scan_prologue): Update.
	* ax-gdb.c (gen_var_ref): Update.
	* breakpoint.c (struct breakpoint_objfile_data)
	<overlay_msym, longjmp_msym, terminate_msym, exception_msym>: Change
	type to bound_minimal_symbol.
	(create_overlay_event_breakpoint)
	(create_longjmp_master_breakpoint)
	(create_std_terminate_master_breakpoint)
	(create_exception_master_breakpoint): Update.
	* bsd-uthread.c (bsd_uthread_lookup_address): Update.
	* c-exp.y (classify_name): Update.
	* coffread.c (coff_symfile_read): Update.
	* common/agent.c (agent_look_up_symbols): Update.
	* d-lang.c (d_main_name): Update.
	* dbxread.c (find_stab_function_addr, end_psymtab): Update.
	* dec-thread.c (enable_dec_thread): Update.
	* dwarf2loc.c (call_site_to_target_addr): Update.
	* elfread.c (elf_gnu_ifunc_resolve_by_got): Update.
	* eval.c (evaluate_subexp_standard): Update.
	* findvar.c (struct minsym_lookup_data) <result>: Change type
	to bound_minimal_symbol.
	<objfile>: Remove.
	(minsym_lookup_iterator_cb, default_read_var_value): Update.
	* frame.c (inside_main_func): Update.
	* frv-tdep.c (frv_frame_this_id): Update.
	* gcore.c (call_target_sbrk): Update.
	* glibc-tdep.c (glibc_skip_solib_resolver): Update.
	* gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline):
	Update.
	* go-lang.c (go_main_name): Update.
	* hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code)
	(hppa_hpux_find_import_stub_for_addr): Update.
	* hppa-tdep.c (hppa_extract_17,	hppa_lookup_stub_minimal_symbol):
	Update.  Change return type.
	* hppa-tdep.h (hppa_lookup_stub_minimal_symbol): Change return
	type.
	* jit.c (jit_breakpoint_re_set_internal): Update.
	* linux-fork.c (inferior_call_waitpid, checkpoint_command):
	Update.
	* linux-nat.c (get_signo): Update.
	* linux-thread-db.c (inferior_has_bug): Update
	* m32c-tdep.c (m32c_return_value)
	(m32c_m16c_address_to_pointer): Update.
	* m32r-tdep.c (m32r_frame_this_id): Update.
	* m68hc11-tdep.c (m68hc11_get_register_info): Update.
	* machoread.c (macho_resolve_oso_sym_with_minsym): Update.
	* minsyms.c (lookup_minimal_symbol_internal): Rename to
	lookup_minimal_symbol.  Change return type.
	(lookup_minimal_symbol): Remove.
	(lookup_bound_minimal_symbol): Update.
	(lookup_minimal_symbol_text): Change return type.
	(lookup_minimal_symbol_solib_trampoline): Change return type.
	* minsyms.h (lookup_minimal_symbol, lookup_minimal_symbol_text)
	(lookup_minimal_symbol_solib_trampoline): Change return type.
	* mips-linux-tdep.c (mips_linux_skip_resolver): Update.
	* objc-lang.c (lookup_objc_class, lookup_child_selector)
	(value_nsstring, find_imps): Update.
	* obsd-tdep.c (obsd_skip_solib_resolver): Update.
	* p-lang.c (pascal_main_name): Update.
	* ppc-linux-tdep.c (ppc_linux_spe_context_lookup): Update.
	* ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
	* proc-service.c (ps_pglobal_lookup): Update.
	* ravenscar-thread.c (get_running_thread_msymbol): Change
	return type.
	(has_ravenscar_runtime, get_running_thread_id): Update.
	* remote.c (remote_check_symbols): Update.
	* sol-thread.c (ps_pglobal_lookup): Update.
	* sol2-tdep.c (sol2_skip_solib_resolver): Update.
	* solib-dsbt.c (lm_base): Update.
	* solib-frv.c (lm_base, frv_relocate_section_addresses):
	Update.
	* solib-irix.c (locate_base): Update.
	* solib-som.c (som_solib_create_inferior_hook)
	(som_solib_desire_dynamic_linker_symbols, link_map_start):
	Update.
	* solib-spu.c (spu_enable_break): Update.
	* solib-svr4.c (elf_locate_base, enable_break): Update.
	* spu-tdep.c (spu_get_overlay_table, spu_catch_start)
	(flush_ea_cache): Update.
	* stabsread.c (define_symbol): Update.
	* symfile.c (simple_read_overlay_table): Update.
	* symtab.c (find_pc_sect_line): Update.
	* tracepoint.c (scope_info): Update.
	* tui-disasm.c (tui_get_begin_asm_address): Update.
	* value.c (value_static_field): Update.
2014-02-26 12:11:17 -07:00
Tom Tromey 40c1a00737 make MSYMBOL_VALUE_ADDRESS an rvalue
This changes MSYMBOL_VALUE_ADDRESS to be an rvalue.  In a later patch
we change this macro to compute its value; this patch introduces a
setter to make the break a bit cleaner.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* minsyms.c (prim_record_minimal_symbol_full): Use
	SET_MSYMBOL_VALUE_ADDRESS.
	* objfiles.c (objfile_relocate1): Use SET_MSYMBOL_VALUE_ADDRESS.
	* sh64-tdep.c (sh64_elf_make_msymbol_special): Use
	SET_MSYMBOL_VALUE_ADDRESS.
	* symtab.h (MSYMBOL_VALUE_ADDRESS): Expand to an rvalue.
	(SET_MSYMBOL_VALUE_ADDRESS): New macro.
2014-02-26 12:11:16 -07:00
Tom Tromey efd66ac669 change minsym representation
In a later patch we're going to change the minimal symbol address
calculation to apply section offsets at the point of use.  To make it
simpler to catch potential problem spots, this patch changes the
representation of minimal symbols and introduces new
minimal-symbol-specific variants of the various accessors.  This is
necessary because it would be excessively ambitious to try to convert
all the symbol types at once.

The core of this change is just renaming a field in minimal_symbol;
the rest is just a fairly mechanical rewording.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* symtab.h (struct minimal_symbol) <mginfo>: Rename from ginfo.
	(MSYMBOL_VALUE, MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES)
	(MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE)
	(MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME)
	(MSYMBOL_LINKAGE_NAME, MSYMBOL_PRINT_NAME, MSYMBOL_DEMANGLED_NAME)
	(MSYMBOL_SET_LANGUAGE, MSYMBOL_SEARCH_NAME)
	(MSYMBOL_MATCHES_SEARCH_NAME, MSYMBOL_SET_NAMES): New macros.
	* ada-lang.c (ada_main_name): Update.
	(ada_lookup_simple_minsym): Update.
	(ada_make_symbol_completion_list): Update.
	(ada_add_standard_exceptions): Update.
	* ada-tasks.c (read_atcb, ada_tasks_inferior_data_sniffer): Update.
	* aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
	* amd64-windows-tdep.c (amd64_skip_main_prologue): Update.
	* arm-tdep.c (skip_prologue_function): Update.
	(arm_skip_stack_protector, arm_skip_stub): Update.
	* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
	(arm_wince_skip_main_prologue): Update.
	* auxv.c (ld_so_xfer_auxv): Update.
	* avr-tdep.c (avr_scan_prologue): Update.
	* ax-gdb.c (gen_var_ref): Update.
	* block.c (call_site_for_pc): Update.
	* blockframe.c (get_pc_function_start): Update.
	(find_pc_partial_function_gnu_ifunc): Update.
	* breakpoint.c (create_overlay_event_breakpoint): Update.
	(create_longjmp_master_breakpoint): Update.
	(create_std_terminate_master_breakpoint): Update.
	(create_exception_master_breakpoint): Update.
	(resolve_sal_pc): Update.
	* bsd-uthread.c (bsd_uthread_lookup_address): Update.
	* btrace.c (ftrace_print_function_name, ftrace_function_switched):
	Update.
	* c-valprint.c (c_val_print): Update.
	* coff-pe-read.c (add_pe_forwarded_sym): Update.
	* coffread.c (coff_symfile_read): Update.
	* common/agent.c (agent_look_up_symbols): Update.
	* dbxread.c (find_stab_function_addr): Update.
	(end_psymtab): Update.
	* dwarf2loc.c (call_site_to_target_addr): Update.
	(func_verify_no_selftailcall): Update.
	(tailcall_dump): Update.
	(call_site_find_chain_1): Update.
	(dwarf_expr_reg_to_entry_parameter): Update.
	* elfread.c (elf_gnu_ifunc_record_cache): Update.
	(elf_gnu_ifunc_resolve_by_got): Update.
	* f-valprint.c (info_common_command): Update.
	* findvar.c (read_var_value): Update.
	* frame.c (get_prev_frame_1): Update.
	(inside_main_func): Update.
	* frv-tdep.c (frv_skip_main_prologue): Update.
	(frv_frame_this_id): Update.
	* glibc-tdep.c (glibc_skip_solib_resolver): Update.
	* gnu-v2-abi.c (gnuv2_value_rtti_type): Update.
	* gnu-v3-abi.c (gnuv3_rtti_type): Update.
	(gnuv3_skip_trampoline): Update.
	* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline): Update.
	(hppa64_hpux_in_solib_call_trampoline): Update.
	(hppa_hpux_skip_trampoline_code): Update.
	(hppa64_hpux_search_dummy_call_sequence): Update.
	(hppa_hpux_find_import_stub_for_addr): Update.
	(hppa_hpux_find_dummy_bpaddr): Update.
	* hppa-tdep.c (hppa_symbol_address)
	(hppa_lookup_stub_minimal_symbol): Update.
	* i386-tdep.c (i386_skip_main_prologue): Update.
	(i386_pe_skip_trampoline_code): Update.
	* ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update.
	* infcall.c (get_function_name): Update.
	* infcmd.c (until_next_command): Update.
	* jit.c (jit_breakpoint_re_set_internal): Update.
	(jit_inferior_init): Update.
	* linespec.c (minsym_found): Update.
	(add_minsym): Update.
	* linux-fork.c (info_checkpoints_command): Update.
	* linux-nat.c (get_signo): Update.
	* linux-thread-db.c (inferior_has_bug): Update.
	* m32c-tdep.c (m32c_return_value): Update.
	(m32c_m16c_address_to_pointer): Update.
	(m32c_m16c_pointer_to_address): Update.
	* m32r-tdep.c (m32r_frame_this_id): Update.
	* m68hc11-tdep.c (m68hc11_get_register_info): Update.
	* machoread.c (macho_resolve_oso_sym_with_minsym): Update.
	* maint.c (maintenance_translate_address): Update.
	* minsyms.c (add_minsym_to_hash_table): Update.
	(add_minsym_to_demangled_hash_table): Update.
	(msymbol_objfile): Update.
	(lookup_minimal_symbol): Update.
	(iterate_over_minimal_symbols): Update.
	(lookup_minimal_symbol_text): Update.
	(lookup_minimal_symbol_by_pc_name): Update.
	(lookup_minimal_symbol_solib_trampoline): Update.
	(lookup_minimal_symbol_by_pc_section_1): Update.
	(lookup_minimal_symbol_and_objfile): Update.
	(prim_record_minimal_symbol_full): Update.
	(compare_minimal_symbols): Update.
	(compact_minimal_symbols): Update.
	(build_minimal_symbol_hash_tables): Update.
	(install_minimal_symbols): Update.
	(terminate_minimal_symbol_table): Update.
	(find_solib_trampoline_target): Update.
	(minimal_symbol_upper_bound): Update.
	* mips-linux-tdep.c (mips_linux_skip_resolver): Update.
	* mips-tdep.c (mips_stub_frame_sniffer): Update.
	(mips_skip_pic_trampoline_code): Update.
	* msp430-tdep.c (msp430_skip_trampoline_code): Update.
	* objc-lang.c (selectors_info): Update.
	(classes_info): Update.
	(find_methods): Update.
	(find_imps): Update.
	(find_objc_msgsend): Update.
	* objfiles.c (objfile_relocate1): Update.
	* objfiles.h (ALL_OBJFILE_MSYMBOLS): Update.
	* obsd-tdep.c (obsd_skip_solib_resolver): Update.
	* p-valprint.c (pascal_val_print): Update.
	* parse.c (write_exp_msymbol): Update.
	* ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code)
	(ppc_linux_spe_context_lookup, ppc_elfv2_skip_entrypoint): Update.
	* ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
	* printcmd.c (build_address_symbolic): Update.
	(sym_info): Update.
	(address_info): Update.
	* proc-service.c (ps_pglobal_lookup): Update.
	* psymtab.c (find_pc_sect_psymtab_closer): Update.
	(find_pc_sect_psymtab): Update.
	* python/py-framefilter.c (py_print_frame): Update.
	* ravenscar-thread.c (get_running_thread_id): Update.
	* record-btrace.c (btrace_call_history, btrace_get_bfun_name):
	Update.
	* remote.c (remote_check_symbols): Update.
	* rs6000-tdep.c (rs6000_skip_main_prologue): Update.
	(rs6000_skip_trampoline_code): Update.
	* sh64-tdep.c (sh64_elf_make_msymbol_special): Update.
	* sol2-tdep.c (sol2_skip_solib_resolver): Update.
	* solib-dsbt.c (lm_base): Update.
	* solib-frv.c (lm_base): Update.
	(main_got): Update.
	* solib-irix.c (locate_base): Update.
	* solib-som.c (som_solib_create_inferior_hook): Update.
	(som_solib_desire_dynamic_linker_symbols): Update.
	(link_map_start): Update.
	* solib-spu.c (spu_enable_break): Update.
	(ocl_enable_break): Update.
	* solib-svr4.c (elf_locate_base): Update.
	(enable_break): Update.
	* spu-tdep.c (spu_get_overlay_table): Update.
	(spu_catch_start): Update.
	(flush_ea_cache): Update.
	* stabsread.c (define_symbol): Update.
	(scan_file_globals): Update.
	* stack.c (find_frame_funname): Update.
	(frame_info): Update.
	* symfile.c (simple_read_overlay_table): Update.
	(simple_overlay_update): Update.
	* symmisc.c (dump_msymbols): Update.
	* symtab.c (fixup_section): Update.
	(find_pc_sect_line): Update.
	(skip_prologue_sal): Update.
	(search_symbols): Update.
	(print_msymbol_info): Update.
	(rbreak_command): Update.
	(MCOMPLETION_LIST_ADD_SYMBOL): New macro.
	(completion_list_objc_symbol): Update.
	(default_make_symbol_completion_list_break_on): Update.
	* tracepoint.c (scope_info): Update.
	* tui/tui-disasm.c (tui_find_disassembly_address): Update.
	(tui_get_begin_asm_address): Update.
	* valops.c (find_function_in_inferior): Update.
	* value.c (value_static_field): Update.
	(value_fn_field): Update.
2014-02-26 12:11:16 -07:00
Tom Tromey 50e65b1713 introduce minimal_symbol_upper_bound
This introduces minimal_symbol_upper_bound and changes various bits of
code to use it.  Since this function is intimately tied to the
implementation of minimal symbol tables, I believe it belongs in
minsyms.c.

The new function is extracted from find_pc_partial_function_gnu_ifunc.
This isn't a "clean" move because the old function interleaved the
caching and the computation; but this doesn't make sense for the new
code.

2014-02-26  Tom Tromey  <tromey@redhat.com>

	* blockframe.c (find_pc_partial_function_gnu_ifunc): Use
	bound minimal symbols.  Move code that knows about minsym
	table layout...
	* minsyms.c (minimal_symbol_upper_bound): ... here.  New
	function.
	* minsyms.h (minimal_symbol_upper_bound): Declare.
	* objc-lang.c (find_objc_msgsend): Use bound minimal symbols,
	minimal_symbol_upper_bound.
2014-02-26 12:11:16 -07:00
Joel Brobecker 1b58801583 [Python] Make regexp collection printers work with typedefs as well.
Consider the following type for which we would like to provide
a pretty-printer and manage it via RegexpCollectionPrettyPrinter:

        typedef long time_t;

Currently, this does not work because this framework only considers
the type's tag name:

        typename = gdb.types.get_basic_type(val.type).tag
        if not typename:
            return None

This patch extends it to use the type's name if the basic type
does not have a tag name, thus allowing the framework to also
work with typedefs like the above.

gdb/ChangeLog:

        * python/lib/gdb/printing.py (RegexpCollectionPrettyPrinter):
        Use the type's name if its basic type does not have a tag.

gdb/testsuite/ChangeLog:

        * testsuite/gdb.python/py-pp-re-notag.c: New file.
        * testsuite/gdb.python/py-pp-re-notag.ex: New file.
        * testsuite/gdb.python/py-pp-re-notag.p: New file.
2014-02-26 11:04:12 -08:00
Joel Brobecker dbb9c2b1f2 Add comment in dwarf2read.c::read_subrange_type
This comment explains why we sometimes sign-extend the range type
bounds when we normally shouldn't have to.

gdb/ChangeLog:

        * dwarf2read.c (read_subrange_type): Add comment.
2014-02-26 10:54:27 -08:00
Joel Brobecker 55426c9d52 DWARF: Set enum type "flag_enum" and "unsigned" flags at type creation.
Consider the following Ada code:

   --  An array whose index is an enumeration type with 128 enumerators.
   type Enum_T is (Enum_000, Enum_001, [...], Enum_128);
   type Table is array (Enum_T) of Boolean;

When the compiler is configured to generate pure DWARF debugging info,
trying to print type Table's description yields:

    ptype pck.table
    type = array (enum_000 .. -128) of boolean

The expected output was:

    ptype pck.table
    type = array (enum_000 .. enum_128) of boolean

The DWARF debugging info for our array looks like this:

    <1><44>: Abbrev Number: 5 (DW_TAG_array_type)
       <45>   DW_AT_name        : pck__table
       <50>   DW_AT_type        : <0x28>
    <2><54>: Abbrev Number: 6 (DW_TAG_subrange_type)
       <55>   DW_AT_type        : <0x5c>
       <59>   DW_AT_lower_bound : 0
       <5a>   DW_AT_upper_bound : 128

The array index type is, by construction with the DWARF standard,
a subrange of our enumeration type, defined as follow:

    <2><5b>: Abbrev Number: 0
    <1><5c>: Abbrev Number: 7 (DW_TAG_enumeration_type)
       <5d>   DW_AT_name        : pck__enum_t
       <69>   DW_AT_byte_size   : 1
    <2><6b>: Abbrev Number: 8 (DW_TAG_enumerator)
       <6c>   DW_AT_name        : pck__enum_000
       <7a>   DW_AT_const_value : 0
    [etc]

Therefore, while processing these DIEs, the array index type ends
up being a TYPE_CODE_RANGE whose target type is our enumeration type.
But the problem is that we read the upper bound as a negative value
(-128), which is then used as is by the type printer to print the
array upper bound. This negative value explains the "-128" in the
output.

To understand why the range type's upper bound is read as a negative
value, one needs to look at how it is determined, in read_subrange_type:

  orig_base_type = die_type (die, cu);
  base_type = check_typedef (orig_base_type);
  [... high is first correctly read as 128, but then ...]
  if (!TYPE_UNSIGNED (base_type) && (high & negative_mask))
    high |= negative_mask;

The negative_mask is applied, here, because BASE_TYPE->FLAG_UNSIGNED
is not set. And the reason for that is because the base_type was only
partially constructed during the call to die_type. While the enum
is constructed on the fly by read_enumeration_type, its flag_unsigned
flag is only set later on, while creating the symbols corresponding to
the enum type's enumerators (see process_enumeration_scope), after
we've already finished creating our range type - and therefore too
late.

My first naive attempt at fixing this problem consisted in extracting
the part in process_enumeration_scope which processes all enumerators,
to generate the associated symbols, but more importantly set the type's
various flags when necessary. However, this does not always work well,
because we're still in the subrange_type's scope, and it might be
different from the scope where the enumeration type is defined.

So, instead, what this patch does to fix the issue is to extract
from process_enumeration_scope the part that determines whether
the enumeration type should have the flag_unsigned and/or the
flag_flag_enum flags set. It turns out that, aside from the code
implementing the loop, this part is fairly independent of the symbol
creation. With that part extracted, we can then use it at the end
of our enumeration type creation, to produce a type which should now
no longer need any adjustment.

Once the enumeration type produced is correctly marked as unsigned,
the subrange type's upper bound is then correctly read as an unsigned
value, therefore giving us an upper bound of 128 instead of -128.

gdb/ChangeLog:

        * dwarf2read.c (update_enumeration_type_from_children): New
        function, mostly extracted from process_structure_scope.
        (read_enumeration_type): Call update_enumeration_type_from_children.
        (process_enumeration_scope): Do not set THIS_TYPE's flag_unsigned
        and flag_flag_enum fields.

gdb/testsuite/ChangeLog:

        * gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files.
2014-02-26 10:39:25 -08:00
Pedro Alves 0dcb32c3ae Mention PR breakpoints/16292 in corresponding ChangeLog entry. 2014-02-26 16:33:13 +00:00
Pedro Alves f2fce0ca3d bsd-uthread.c: Don't install a to_xfer_partial method
Whatever the comment about deprecated_xfer_memory referred to,
deprecated_xfer_memory is gone now.  There's no need to install a
target method that just delegates, as that's what the default
delegator does already.

Tested by building an --enable-targets=all gdb on x86_64 Fedora 17.

gdb/
2014-02-26  Pedro Alves  <palves@redhat.com>

	* bsd-uthread.c (bsd_uthread_xfer_partial): Delete function.
	(bsd_uthread_target): Don't install bsd_uthread_xfer_partial as
	to_xfer_partial method.
2014-02-26 14:40:04 +00:00
Pedro Alves 7a44e40e8b eliminate target_ops->deprecated_xfer_memory
As no target uses it anymore, it can finally go away.

After removing the deprecated_xfer_memory handling from
default_xfer_partial, we can delete the latter, because the only thing
it does is delegate to the target beneath unconditionally, which is
what the delegator installed by target-delegates.c will do for us if
no to_xfer_partial method is installed.

This was the last user of de_fault, so that goes away too.

Tested on x86_64 Fedora 17.

gdb/
2014-02-26  Pedro Alves  <palves@redhat.com>

	* target.c (complete_target_initialization): Don't install
	default_xfer_partial as to_xfer_partial hook.
	(nomemory): Delete.
	(update_current_target): Don't INHERIT nor de_fault
	deprecated_xfer_memory.  Delete de_fault macro.
	(default_xfer_partial, deprecated_debug_xfer_memory): Delete.
	(setup_target_debug): Don't install a deprecated_xfer_memory hook.
	* target.h (struct target_ops) <deprecated_xfer_memory>: Delete
	field.
2014-02-26 14:39:23 +00:00
Pedro Alves bd265cd0bd go32-nat.c: Don't install a deprecated_xfer_memory method
This removes yet another instance of a deprecated_xfer_memory user.

Unfortunately djgpp's write_child function takes a non-const buffer
pointer, while GDB's xfer_partial api passes a const pointer.  To be
const-correct, we need to copy that buffer to a non-const buffer, and
pass the copy to write_child.  This is actually what
target.c:default_xfer_partial itself does, when calling into the
ops->deprecated_xfer_memory hook.

Tested by cross-building djgpp gdb, on x86-64 Fedora 17.

gdb/
2014-02-26  Pedro Alves  <palves@redhat.com>

	* go32-nat.c (my_write_child): New function.
	(go32_xfer_memory): Rewrite as to_xfer_partial helper.
	(go32_xfer_partial): New function.
	(init_go32_ops): Don't install a deprecated_xfer_memory hook.
	Instead install a to_xfer_partial hook.
2014-02-26 14:38:31 +00:00
Pedro Alves 9d46c4e5f5 nto-procfs.c: Don't install a deprecated_xfer_memory method
This removes yet another instance of a deprecated_xfer_memory user.

Completely untested.

gdb/
2014-02-26  Pedro Alves  <palves@redhat.com>

	* nto-procfs.c (procfs_xfer_memory): Adjust interface as a
	to_xfer_partial helper.  Rewrite.
	(procfs_xfer_partial): New function.
	(init_procfs_ops): Don't install a deprecated_xfer_memory hook.
	Install a to_xfer_partial hook.
2014-02-26 14:37:48 +00:00
Pedro Alves a1583b1fd9 remote-m32r-sdi.c: Don't install a deprecated_xfer_memory method
This removes yet another instance of a deprecated_xfer_memory user.

Tested by building a --enable-targets=all gdb, on x86-64 Fedora 17.

gdb/
2014-02-26  Pedro Alves  <palves@redhat.com>

	* remote-m32r-sdi.c (send_data): Constify 'buf' parameter.
	(m32r_xfer_memory): Adjust as a to_xfer_partial helper.
	(m32r_xfer_partial): New function.
	(init_m32r_ops): Don't install a deprecated_xfer_memory hook.
	Install a to_xfer_partial hook.
2014-02-26 14:37:14 +00:00