Rename and move inferior_thread_state and inferior_status.
* gdbthread.h (struct thread_control_state): New struct, move fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step and stop_bpstat here from struct thread_info.
(struct thread_suspend_state): New struct, move field stop_signal here
from struct thread_info.
(struct thread_info): Move the fields above from this struct.
* inferior.h: Move the inferior_thread_state and inferior_status
declarations comment to their definitions at infrun.c.
(struct inferior_control_state): New struct, move field stop_soon from
struct inferior here.
(struct inferior_suspend_state): New empty struct.
(struct inferior): New fields control and suspend. Move out field
stop_soon.
* infrun.c (struct inferior_thread_state): Rename to ...
(infcall_suspend_state): ... here. Replace field stop_signal by
fields thread_suspend and inferior_suspend.
(save_inferior_thread_state): Rename to ...
(save_infcall_suspend_state): ... here. New variable inf. Update the
code for new fields.
(restore_inferior_thread_state): Rename to ...
(restore_infcall_suspend_state): ... here. New variable inf. Update
the code for new fields.
(do_restore_inferior_thread_state_cleanup): Rename to ...
(do_restore_infcall_suspend_state_cleanup): ... here.
(make_cleanup_restore_inferior_thread_state): Rename to ...
(make_cleanup_restore_infcall_suspend_state): ... here.
(discard_inferior_thread_state): Rename to ...
(discard_infcall_suspend_state): ... here.
(get_inferior_thread_state_regcache): Rename to ...
(get_infcall_suspend_state_regcache): ... here.
(struct inferior_status): Rename to ...
(struct infcall_control_state): ... here. Replace fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step, stop_bpstat and stop_soon by fields thread_control and
inferior_control.
(save_inferior_status): Rename to ...
(save_infcall_control_state): ... here. Update the code for new
fields.
(restore_inferior_status): Rename to ...
(restore_infcall_control_state): ... here. Update the code for new
fields.
(do_restore_inferior_status_cleanup): Rename to ...
(do_restore_infcall_control_state_cleanup): ... here.
(make_cleanup_restore_inferior_status): Rename to ...
(make_cleanup_restore_infcall_control_state): ... here.
(discard_inferior_status): Rename to ...
(discard_infcall_control_state): ... here.
* alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h,
exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c,
inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c,
mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the
references to the moved fields and renamed functions.
Add per-operation permission flags.
* target.h (struct target_ops): New method to_set_permissions.
(target_set_permissions): New macro.
(target_insert_breakpoint): Change macro to function.
(target_remove_breakpoint): Ditto.
(target_stop): Ditto.
(may_write_registers): Declare.
(may_write_memory): Declare.
(may_insert_breakpoints): Declare.
(may_insert_tracepoints): Declare.
(may_insert_fast_tracepoints): Declare.
(may_stop): Declare.
* target.c (may_write_registers, may_write_registers_1): New globals.
(may_write_memory, may_write_memory_1): New globals.
(may_insert_breakpoints, may_insert_breakpoints_1): New globals.
(may_insert_tracepoints, may_insert_tracepoints_1): New globals.
(may_insert_fast_tracepoints, may_insert_fast_tracepoints_1): New
globals.
(may_stop, may_stop_1): New global.
(target_xfer_partial): Test for write permission.
(target_store_registers): Ditto.
(target_insert_breakpoint): New function.
(target_remove_breakpoint): New function.
(target_stop): New function.
(_initialize_targets): Add new set/show variables.
(set_write_memory_permission): New function.
(update_target_permissions): New function.
(set_target_permissions): New function.
(update_current_target): Default to_set_permissions.
(_initialize_targets): Use new globals and setter function.
* tracepoint.c (start_tracing): Test for permission.
* inferior.h (update_observer_mode): Declare.
* infrun.c (non_stop_1): Define earlier.
(observer_mode, observer_mode_1): New globals.
(set_observer_mode, show_observer_mode): New functions.
(update_observer_mode): New function.
(_initialize_infrun): Define "set observer" command.
* remote.c (PACKET_QAllow): New optional packet.
(remote_protocol_features): Add QAllow.
(remote_set_permissions): New function.
(remote_start_remote): Call it.
(init_remote_ops): Add it to target vector.
(_initialize_remote): Add config command for QAllow.
* gdb.texinfo (Observer Mode): New section.
(General Query Packets): Document QAllow.
* gdb.base/permissions.exp: New file.
* breakpoint.c (clear_syscall_counts): Take struct inferior*.
* inferior.c (add_inferior_silent): Notify inferior_added
observer.
(delete_inferior_1): Notify inferior_removed observer.
(exit_inferior_1): Pass inferior, not pid, to observer.
(inferior_appeared): Likewise.
(add_inferior_with_spaces): New.
(add_inferior_command): Use the above.
* inferior.h (delete_inferior_1, add_inferior_with_spaces):
Declare.
* inflow.c (inflow_inferior_exit): Likewise.
* jit.c (jit_inferior_exit_hook): Likewise.
* mi/mi-cmds.c (mi_cmds): Register add-inferior and
remove-inferior.
* mi/mi-cmds.h (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
* mi/mi-interp.c (mi_inferior_added, mi_inferior_removed): New.
(report_initial_inferior): New.
(mi_inferior_removed): Register the above. Make sure
inferior_added observer is called on the first inferior.
(mi_new_thread, mi_thread_exit): Thread group is now identified by
inferior number, not pid.
(mi_solib_loaded, mi_solib_unloaded): Report which inferiors are
affected.
* mi/mi-main.c (current_context): New.
(proceed_thread_callback): Use typed closure.
Proceed everything if pid is 0. Most implementation split into
(proceed_thread): ... this.
(run_one_inferior): New.
(mi_cmd_exec_continue, mi_cmd_exec_interrupt, mi_cmd_exec_run):
Adjust for multiexec behaviour.
(mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
(mi_cmd_execute): Handle the 'thread-group' option here.
Do some extra checks.
* mi-parse.c (mi_parse): Handle the --all and --thread-group
options.
* mi-parse.h (struct mi_parse): New fields all and thread_group.
* infcmd.c (inferior_args): Rename to ...
(inferior_args_scratch): ... this.
(inferior_io_terminal): Rename to ...
(inferior_io_terminal_scratch): ... this.
(inferior_argc, inferior_argv): Remove.
(set_inferior_io_terminal, get_inferior_io_terminal): Store
inside current_inferior().
(set_inferior_tty_command, show_inferior_tty_command): New.
(get_inferior_args, set_inferior_args): Store inside
current_inferior().
(notice_args_set): Likewise and rename to...
(set_args_command): ... this.
(set_inferior_args_vector): Likewise.
(notice_args_read): Rename to...
(show_args_command): ...new.
(tty_command): Remove.
(run_command_1): Don't free old args, as they are freed by
set_inferior_arg now.
(run_no_args_command): Likewise.
(inferior_environ): Remove.
(run_command_1): Use environment of the current inferior.
(environment_info, set_environment_command)
(unset_environment_command, path_info, path_command): Likewise.
(_initialize_infcmd): Adjust for function and variable renames.
Do not init inferior_environ.
* inferior.h (set_inferior_arg): Adjust prototype.
(struct inferior): New fields args, argc, argv, terminal, environment.
(inferior_environ): Remove declaration.
* inferior.c (free_inferior): Free new fields.
(add_inferior_silent): Initialize 'environment' field.
* main.c (captured_main): Set arguments only after the initial
inferior has been created. Set set_inferior_io_terminal,
not tty_command.
* mi/mi-main.c (mi_cmd_env_path): Use environment of the current
inferior.
(_initialize_mi_cmd_env): Adjust for disappearance of global
inferior_environ.
* solib.c (solib_find): Use environment of the current inferior.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
* amd64-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall name for the architecture.
(amd64_linux_get_syscall_number): New function.
(amd64_linux_init_abi): Register the correct functions for syscall
catchpoint; set the correct syscall file name.
* breakpoint.c: New include: xml-syscall.h.
(set_raw_breakpoint_without_location): Setting the parameters
for the catch syscall feature.
(insert_catch_syscall): New.
(remove_catch_syscall): New.
(breakpoint_hit_catch_syscall): New.
(print_it_catch_syscall): New.
(print_one_catch_syscall): New.
(print_mention_catch_syscall): New.
(catch_syscall_breakpoint_ops): New.
(syscall_catchpoint_p): New.
(create_catchpoint_without_mention): New.
(create_catchpoint): Modified in order to use
create_catchpoint_without_mention.
(create_syscall_event_catchpoint): New.
(clean_up_filters): New.
(catch_syscall_split_args): New.
(catch_syscall_command_1): New.
(delete_breakpoint): Add cleanup for catch syscall.
(is_syscall_catchpoint_enabled): New.
(catch_syscall_enabled): New.
(catching_syscall_number): New.
(catch_syscall_completer): New completer function.
(add_catch_command): Add the completer function for catchpoints.
* breakpoint.h (syscalls_to_be_caught): New vector.
(catch_syscall_enabled): New.
(catching_syscall_number): New.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* gdbarch.sh: Add syscall catchpoint functions and structures.
(get_syscall_number): New.
(UNKNOWN_SYSCALL): New definition.
* i386-linux-nat.c (i386_linux_resume): Select the proper request
to be made for ptrace() considering if we are catching syscalls
or not.
* i386-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall name for the architecture.
(i386_linux_get_syscall_number): New.
(i386_linux_init_abi): Register the correct functions for syscall
catchpoint; set the correct syscall file name.
* inf-child.c (inf_child_set_syscall_catchpoint): New.
(inf_child_target): Assign default values to target_ops.
* inf-ptrace.c (inf_ptrace_resume): Select the proper request
to be made for ptrace() considering if we are catching syscalls
or not.
* inferior.h (struct inferior): Included new variables
any_syscall_count, syscalls_counts and total_syscalls_count,
used to keep track of requested syscall catchpoints.
* infrun.c (resume): Add syscall catchpoint.
(deal_with_syscall_event): New.
(handle_inferior_event): Add syscall entry/return events.
(inferior_has_called_syscall): New.
* linux-nat.c: Define some helpful variables to track wether we have
support for the needed ptrace option.
(linux_test_for_tracesysgood): New.
(linux_supports_tracesysgood): New.
(linux_enable_tracesysgood): New.
(linux_enable_event_reporting): Save the current used ptrace
options.
(linux_child_post_attach): Calling linux_enable_tracesysgood.
(linux_child_post_startup_inferior): Likewise.
(linux_child_set_syscall_catchpoint): New function.
(linux_handle_extended_wait): Handle the case which the inferior stops
because it has called or returned from a syscall.
(linux_target_install_ops): Install the necessary functions to handle
syscall catchpoints.
* linux-nat.h (struct lwp_info): Include syscall_state into the
structure, which indicates if we are in a syscall entry or return.
* ppc-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall filename for the arch.
(ppc_linux_get_syscall_number): New.
(ppc_linux_init_abi): Register the correct functions for syscall
catchpoint; setting the correct name for the XML syscall file.
* target.c (update_current_target): Update/copy functions related to
syscall catchpoint.
(target_waitstatus_to_string): Add syscall catchpoint entry/return
events.
* target.h (struct target_waitstatus): Add syscall number.
(struct syscall): New struct to hold information about syscalls
in the system.
(struct target_ops): Add ops for syscall catchpoint.
(inferior_has_called_syscall): New.
(target_set_syscall_catchpoint): New.
* xml-support.c (xml_fetch_content_from_file): New function,
transferred from xml-tdesc.c.
* xml-support.h (xml_fetch_content_from_file): New.
* xml-tdesc.c (fetch_xml_from_file): Function removed;
transferred to xml-support.c.
(file_read_description_xml): Updated to use the new
xml_fetch_content_from_file function.
* syscalls/gdb-syscalls.dtd: New definition file for syscall's XML
support.
* syscalls/amd64-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use amd64 architecture.
* syscalls/i386-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use i386 architecture.
* syscalls/ppc-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use PPC architecture.
* syscalls/ppc64-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use PPC64 architecture.
* xml-syscall.c: New file containing functions for manipulating
syscall's XML files.
* xml-syscall.h: New file, exporting the functions above mentioned.
* Makefile.in: Support for relocatable GDB datadir and XML
syscall.
* NEWS: Added information about the catch syscall feature.
* doc/gdb.texinfo (Set Catchpoints): Documentation about the new
feature.
* testsuite/Makefile.in: Inclusion of catch-syscall object.
* testsuite/gdb.base/catch-syscall.c: New file.
* testsuite/gdb.base/catch-syscall.exp: New file.
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
* infrun.c (sched_multi): New global.
(resume): If sched_multi is set, resume only threads of the
current inferior.
(prepare_to_proceed): Don't switch over to wait_ptid if we're
resuming a different inferior, and sched_multi is off.
(show_schedule_multiple): New.
(_initialize_infrun): Register new "set schedule-multiple" command.
* inferior.h (sched_multi): Declare.
* NEWS: Mention new "schedule-multiple" setting.
gdb/doc/
* gdb.texinfo (All-Stop): Document new 'set schedule-multiple'
command.
(fork_inferior): Call new_tty_postfork after forking adn adding
the child to the inferior list.
* inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
here.
* inflow.c (struct terminal_info): Remove const qualifier from
`run_terminal' field.
(inferior_thisrun_terminal): Tweak comment.
(inflow_inferior_exit): Release the `run_terminal' field.
(copy_terminal_info): New function.
(new_tty_postfork): New function.
* terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
(copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
* inf-ptrace.c: Include terminal.h.
(inf_ptrace_follow_fork): Copy the parent's terminal info to the
child.
* linux-nat.c: Include terminal.h.
(linux_child_follow_fork): Copy the parent's terminal info to the
child.
* inf-ttrace.c: Include terminal.h.
(inf_ttrace_follow_fork): Copy the parent's terminal info to the
child.
(inferior_process_group): Delete global variable declaration.
(inferior_process_group): New function declaration.
* inflow.c: Include observer.h.
(inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
Delete.
(struct terminal_info): New struct.
(our_terminal_info): New global.
(inferior_process_group): New function.
(inferior_thisrun_terminal): Extend description comment.
(gdb_has_a_terminal): Adjust to write to our_terminal_info fields
instead of globals.
(terminal_init_inferior_with_pgrp): Adjust to per-inferior
terminal settings.
(terminal_inferior): Ditto.
(terminal_ours_1): Ditto.
(inflow_new_inferior, inflow_inferior_exit): New functions.
(child_terminal_info): Adjust to per-inferior terminal settings.
(osig_set): New global.
(set_sigint_trap): Adjust to per-inferior terminal settings. Set
or clear `osig_set' accordingly.
(clear_sigint_trap): Check `osig_set' to decide wheater to restore
SIGINT handler, instead of checking the current inferior (which
may be none).
(_initialize_inflow): Attach inflow_new_inferior and
inflow_inferior_exit to the "new_inferior" and "inferior_exit"
notifications, respectively.
* inferior.h (struct terminal_info): Forward declare.
(struct inferior): Add `terminal_info' field.
* inferior.c (delete_inferior_1): Notify the inferior_exit
observers before removing the inferior from the lists and deleting
it.
* inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
a function instead of a variable. Adjust.
* procfs.c (procfs_stop): Ditto.
* mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
to the about_to_proceed observer notification.
(mi_about_to_proceed): New.
(mi_on_resume): Only output ^running and the prompt here if the
target was proceeded.
* breakpoint.c (breakpoint_proceeded): New static.
(breakpoint_about_to_proceed): New.
(_initialize_breakpoints): Attach breakpoint_about_to_proceed to
the about_to_proceed observer notification.
* inferior.h (breakpoint_proceeded): Delete declaration.
* infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
Notify the about_to_proceed observers.
(struct inferior_status): Delete breakpoint_proceeded member.
(save_inferior_status): Don't save it.
(restore_inferior_status): Don't restore it.
* mi-main.h (mi_proceeded): Declare.
* mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
a command.
gdb/doc/
* observer.texi (about_to_proceed): New.
* infcmd.c (notice_new_inferior): New.
* remote.c (remote_add_inferior, remote_add_thread): New.
(notice_new_inferiors): Rename to...
(remote_notice_new_inferior): ... this. Add RUNNING argument.
Use remote_add_thread instead of add_thread, passing it the
RUNNING argument. Add an inferior with remote_add_inferior. If
we just learned about an inferior, call notice_new_inferior.
(record_currthread): Adjust.
(remote_threads_info): Adjust to use remote_notice_new_inferior.
(remote_start_remote, extended_remote_attach_1): Use remote_add_inferior.
(process_stop_reply): Adjust. Call remote_notice_new_inferior
after handling expedited registers and watchpoint state.
(extended_remote_create_inferior_1): Use remote_add_inferior.
Silence a few -Wmissing-prototypes warnings.
PR build/9877:
* amd64-nat.c: Include "amd64-nat.h".
* fork-child.c (_initialize_fork_child): Ditto.
* gcore.c (_initialize_gcore): Ditto.
* inf-ptrace.c: Include "inf-ptrace.h".
(inf_ptrace_store_registers): Make it static.
* linux-nat.c (linux_nat_terminal_ours): Make it static.
(_initialize_linux_nat): Declare before definition.
* linux-tdep.c: Include "linux-tdep.h".
* linux-thread-db.c (_initialize_thread_db): Declare before
definition.
* proc-service.c (_initialize_proc_service): Ditto.
* remote.c (remote_send_printf): Make it static.
* solib.c: Include "solib.h".
* symfile-mem.c (_initialize_symfile_mem): Declare before
definition.
* ada-lang.c (ada_la_decode, ada_match_name)
(ada_suppress_symbol_printing, ada_is_array_type)
(ada_value_ptr_subscript, ada_array_length)
(ada_to_static_fixed_value): Make them static.
(_initialize_ada_language): Declare before definition.
* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
(ada_task_list_changed, ada_new_objfile_observer): Make them
static.
(_initialize_tasks): Declare before definition.
* addrmap.c (_initialize_addrmap): Declare before definition.
* auxv.c (default_auxv_parse): Make it static.
* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
them static.
* breakpoint.c (remove_sal): Add line break.
(expand_line_sal_maybe): Make it static.
* cp-name-parser.y: Include "cp-support.h".
* cp-valprint.c (cp_find_class_member): Make it static.
* eval.c (value_f90_subarray): Ditto.
* exceptions.c (print_any_exception): Ditto.
* findcmd.c (_initialize_mem_search): Declare before definition.
* frame.c (frame_observer_target_changed): Make it static.
* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
* inf-child.c: Include "inf-child.h".
* inferior.h (valid_inferior_id): Rename to ...
(valid_gdb_inferior_id): ... this.
* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
Make them static.
* jv-lang.c (java_language_arch_info): Make it static.
* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
* osdata.c (info_osdata_command): Make it static.
* regcache.c (regcache_observer_target_changed): Make it static.
* reverse.c (_initialize_reverse): Declare before definition.
* stabsread.c (cleanup_undefined_types_noname)
(cleanup_undefined_types_1): Make them static.
* symfile.c (place_section): Make it static.
* symtab.c (find_pc_sect_psymtab_closer): Make it static.
* target-descriptions.c (_initialize_target_descriptions): Declare
before definition.
* target.c (default_get_ada_task_ptid, find_default_can_async_p)
(find_default_is_async_p, find_default_supports_non_stop): Make
them static.
(target_supports_non_stop): Add prototype.
(dummy_pid_to_str): Make it static.
* utils.c (_initialize_utils): Declare before definition.
* ada-exp.y (_initialize_ada_exp): Declare before definition.
* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
* target.h (struct target_ops): Add a prototype to the
to_can_execute_reverse callback.
* macroscope.c (_initialize_macroscope): Declare before definition.
* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
* python/python.c (_initialize_python): Declare before definition.
* tui/tui-command.c: Include "tui/tui-command.h".
* tui/tui-data.c (init_content_element, init_win_info): Make them
static.
* tui/tui-disasm.c: Include "tui/tui-disasm.h".
* tui/tui-interp.c (_initialize_tui_interp): Declare before
definition.
* tui/tui-layout.c: Include "tui/tui-layout.h".
(_initialize_tui_layout): Declare before definition.
* tui/tui-regs.c: Include "tui/tui-regs.h".
(tui_display_reg_element_at_line): Make it static.
(_initialize_tui_regs): Declare before definition.
* tui/tui-stack.c (_initialize_tui_stack): Declare before
definition.
* tui/tui-win.c: Include "tui/tui-win.h".
(_initialize_tui_win): Declare before definition.
(tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
(tui_get_cmd_list): Add a prototype.
* tui/tui-windata.c: Include tui-windata.h.
* tui/tui-wingeneral.c (box_win): Make it static.
* cli/cli-logging.c (show_logging_command): Make it static.
(_initialize_cli_logging): Declare before definition.
* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
definition.
caller_state.
(dummy_frame_push): Replace caller_regcache arg with caller_state.
All callers updated.
(remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
(dummy_frame_pop): Rewrite. Verify requested frame is in the
dummy frame stack. Restore program state.
(cleanup_dummy_frames): Rewrite.
(dummy_frame_sniffer): Update. Make static.
* dummy-frame.h (regcache,frame_info): Delete forward decls.
(inferior_thread_state): New forward decl.
(dummy_frame_push): Update prototype.
* frame.c (frame_pop): dummy_frame_pop now does all the work for
DUMMY_FRAMEs.
* infcall.c (breakpoint_auto_delete_contents): Delete.
(get_function_name,run_inferior_call): New fns.
(call_function_by_hand): Simplify by moving some code to
get_function_name, run_inferior_call. Inferior function call wrapped
in TRY_CATCH so there's less need for cleanups and all exits from
proceed are handled similarily. Detect program exit.
Detect program stopping in a different thread.
Make error messages more consistent.
* inferior.h (inferior_thread_state): Declare (opaque type).
(save_inferior_thread_state,restore_inferior_thread_state,
make_cleanup_restore_inferior_thread_state,
discard_inferior_thread_state, get_inferior_thread_state_regcache):
Declare.
(save_inferior_status): Update prototype.
* infrun.c: (normal_stop): When stopped for the completion of an
inferior function call, verify the expected stack frame kind.
(inferior_thread_state): New struct.
(save_inferior_thread_state,restore_inferior_thread_state,
do_restore_inferior_thread_state_cleanup,
make_cleanup_restore_inferior_thread_state,
discard_inferior_thread_state,
get_inferior_thread_state_regcache): New functions.
(inferior_status): Move stop_signal, stop_pc, registers to
inferior_thread_state. Remove restore_stack_info.
(save_inferior_status): Remove arg restore_stack_info.
All callers updated. Remove saving of state now saved by
save_inferior_thread_state.
(restore_inferior_status): Remove restoration of state now done by
restore_inferior_thread_state.
(discard_inferior_status): Remove freeing of registers, now done by
discard_inferior_thread_state.
* gdb.base/break.exp: Update expected gdb output.
* gdb.base/sepdebug.exp: Ditto.
* gdb.mi/mi-syn-frame.exp: Ditto.
* gdb.mi/mi2-syn-frame.exp: Ditto.
* gdb.base/call-signal-resume.exp: New file.
* gdb.base/call-signals.c: New file.
* gdb.base/unwindonsignal.exp: New file.
* gdb.base/unwindonsignal.c: New file.
* gdb.threads/interrupted-hand-call.exp: New file.
* gdb.threads/interrupted-hand-call.c: New file.
* gdb.threads/thread-unwindonsignal.exp: New file.
(do_all_inferior_continuations)
(discard_all_inferior_continuations): Declare.
* utils.c (add_inferior_continuation)
(do_all_inferior_continuations)
(discard_all_inferior_continuations): New.
* inferior.h (struct inferior) <continuations>: New field.
* inferior.c (free_inferior): Discard all the inferior
continuations.
* inf-loop.c (inferior_event_handler): Do all current inferior
continuations.
* infcmd.c (attach_command): Register an inferior continuation
instead of a thread continuation.
* infrun.c (handle_inferior_event): If stop_soon is
STOP_QUIETLY_NO_SIGSTOP, also expect a TARGET_SIGNAL_0.
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* defs.h: Mention ptid_is_pid.
* inferior.h (ptid_is_pid): Declare.
* gdbthread.h (struct thread_info) <stop_requested>: New field.
(set_stop_requested): Declare.
* infcmd.c (interrupt_target_1): Call set_stop_requested.
* infrun.c (clear_proceed_status): Clear stop_requested.
(infrun_thread_stop_requested_callback,
infrun_thread_stop_requested): New.
(handle_inferior_event): If a TARGET_SIGNAL_TRAP is reported on a
thread that had an explicit stop request, pretend we got a
TARGET_SIGNAL_0. Always stop if the thread had an explicit stop
request.
(print_stop_reason): In the SIGNAL_RECEIVED case, if we're not
outputting to MI, and we got a TARGET_SIGNAL_0, print "# Stopped",
instead of mentioning signal 0.
(ptid_is_pid): New.
* thread.c (set_stop_requested): New.
* linux-nat.c (queued_waitpid): Rename to ...
(queued_waitpid_1): ... this. Add `peek' argument. Handle it.
(queued_waitpid): New, as wrapper to queued_waitpid_1.
(push_waitpid): Push the SIGTRAP to the local event queue, to the
kernel's.
(send_sigint_callback): Delete.
(linux_nat_stop_lwp): New.
(linux_nat_stop): Use it.
gdb/doc/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* observer.texi (thread_stop_requested): New.
gdb/testsuite/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* lib/mi-support.exp (mi_expect_interrupt): Expect signal 0
instead of SIGINT.
Target interface for reverse debugging.
* target.h (enum target_waitkind):
Add new wait event, TARGET_WAITKIND_NO_HISTORY.
(struct target_ops): New method to_can_execute_reverse.
(target_can_execute_reverse): New macro.
* target.c (update_current_target): Inherit to_can_execute_reverse.
Remote interface for reverse debugging.
* remote.c (remote_can_execute_reverse): New target method.
(remote_resume): Check for reverse exec direction, and send
appropriate command to target.
(remote_wait_as): Check target response for NO_HISTORY status.
Also check for empty reply (target doesn't understand "bs" or "bc).
(remote_vcont_resume): Jump out if attempting reverse execution.
Event handling interface for reverse debugging.
* infrun.c (execution_direction): New state variable.
(enum inferior_stop_reason): Add NO_HISTORY reason.
(handle_inferior_event): Handle TARGET_WAITKIND_NO_HISTORY.
Handle stepping over a function call in reverse.
Handle stepping thru a line range in reverse.
Handle setting a step-resume breakpoint in reverse.
Handle stepping into a function in reverse.
Handle stepping between line ranges in reverse.
(print_stop_reason): Print reason for NO_HISTORY.
(step_into_function): Rename to handle_step_into_function.
(handle_step_into_function_backward): New function.
(set_exec_direction_func, show_exec_direction_func): New funcs.
(proceed): No need to singlestep over a breakpoint
when resuming in reverse.
* inferior.h (enum exec_direction_kind): New enum.
(execution_direction): Export new execution state variable.
* breakpoint.c (make_breakpoint_silent): New function.
* breakpoint.h (make_breakpoint_silent): Export.
* infcmd.c (finish_command): Check for reverse exec direction.
(finish_backward): New function, handle finish cmd in reverse.
User interface for reverse execution.
* Makefile.in (reverse.c): New file.
* reverse.c: New file. User interface for reverse execution.
* inferior.h (attach_flag): Delete.
(inferior_process): Declare.
* solib.c (update_solib_list): Adjust.
* gnu-nat.c (gnu_create_inferior, gnu_attach): Adjust.
* inf-ptrace.c (inf_ptrace_detach): Adjust.
(inf_ptrace_files_info): Get it from the current inferior.
* inf-ttrace.c (inf_ttrace_attach): Adjust.
(inf_ttrace_files_info): Get it from the current
inferior.
* inflow.c (terminal_inferior, terminal_ours_1, set_sigint_trap)
(clear_sigint_trap): Get it from the current process.
* remote.c (extended_remote_attach_1)
(extended_remote_create_inferior_1): Adjust.
* top.c (quit_confirm, quit_target): Get it from the current inferior.
* procfs.c (do_detach): Adjust.
(procfs_wait): Get it from the event inferior.
(procfs_files_info): Get it from the current inferior.
* nto-procfs.c (procfs_files_info): Likewise.
(procfs_attach): Adjust. Set the attach_flag here.
(do_attach): Don't set it here.
(procfs_detach): Don't clear it.
(procfs_mourn_inferior): Don't clear it.
* solib-osf.c (osf_solib_create_inferior_hook): Adjust.
* target.c (attach_flag): Delete.
(generic_mourn_inferior): Don't clear it.
* win32-nat.c (get_win32_debug_event): Get it from the event
process.
(do_initial_win32_stuff): Add attaching argument. Set attach_flag
in the inferior accordingly.
(win32_attach): Don't set the attach_flag here. Pass 1 to
do_intial_win32_stuff.
(win32_files_info): Get it from the current inferior.
(win32_create_inferior): Dont clear attach_flag here. Pass 0 to
do_intial_win32_stuff.
* remote.c (struct remote_state): Add extended and
multi_process_aware fields.
(remote_multi_process_p): New.
(PACKET_vKill): New.
(record_currthread): Use thread_change_ptid. Notice new
inferiors.
(set_thread, remote_thread_alive): Use write_ptid.
(write_ptid, read_ptid): New.
(remote_current_thread, remote_threads_extra_info): Use them.
(remote_threads_info): Likewise. Detect new inferiors.
(remote_start_remote): Add inferior to inferior list.
(remote_multi_process_feature): New.
(remote_protocol_features): Add "multiprocess" feature.
(remote_query_supported): Pass "multiprocess+" as supported
features.
(remote_open_1): Clear multi_process_aware. Set extended
accordingly.
(remote_detach_1): Detach current process. Use extended packet
format for extended-remote multi-process. Detach process from the
inferior list. Only mourn after printing output.
(extended_remote_attach_1): Add process to the inferior list.
(remote_vcont_resume): Use write_ptid to pass the thread ids.
(remote_wait): Use read_ptid. Implement the extended
multi-process extension format of the 'W' and 'X' reply packets.
Remove exited inferiors from inferior list.
(remote_xfer_memory): Set general thread.
(remote_vkill): New.
(extended_remote_kill): New.
(remote_mourn_1): Discard all inferiors.
(select_new_thread_callback): New.
(extended_remote_mourn_1): If there are more processes to debug,
switch to a thread in another process, and don't pop the target.
(extended_remote_create_inferior_1): Add the new process to the
inferior list.
(remote_stopped_by_watchpoint): Indenting.
(remote_xfer_partial): Set the general thread.
(remote_pid_to_str): If the remote is multi-process aware, print
the process id as well as the thread id.
(remote_get_thread_local_address): Use write_ptid.
(init_extended_remote_ops): Register extended_remote_kill.
(_initialize_remote): Register new packets. Change
magic_null_ptid's, not_sent_ptid's and any_thread_ptid's pid
member to 42000.
* thread.c (thread_change_ptid): Also account for the inferior pid
changing.
* inferior.h (discard_all_inferiors): Declare.
* inferior.c (discard_all_inferiors): New.
* infrun.c (context_switch): Don't save and load infrun state.
(context_switch_to): Delete.
* infcmd.c (proceed_thread_callback): Replace context_switch_to
calls by switch_to_thread calls.
* gdbthread.h (save_infrun_state, load_infrun_state): Delete.
* thread.c (main_thread_state, main_thread_executing): Delete.
(inferior_thread): Delete references to them.
(add_thread_silent): Fix case where we're adding a thread with the
same ptid as an exited thread. Remove references to
context-switching.
(load_infrun_state, save_infrun_state): Delete.
(thread_alive, is_thread_state, any_running, is_executing)
(set_executing): Remove the special handling for targets that
don't register any thread.
(restore_current_thread, thread_apply_all_command)
(do_captured_thread_select): Unconditionally call
switch_to_thread.
* mi/mi-main.c (mi_cmd_execute): Check for exited threads.
Call switch_to_thread instead of context_switch_to.
* breakpoint.h (bpstat_do_actions): Remove bpstat* argument.
* breakpoint.c (bpstat_do_actions): Rename to ...
(bpstat_do_actions_1): ... this. Make static. Change return type
to int. Return true if a breakpoint proceeded.
(bpstat_do_actions): New, as wrapper around bpstat_do_actions_1.
(delete_breakpoint): Don't reference the global stop_bpstat; it's
gone.
* gdbthread.h (struct thread_info): Add stop_bpstat.
(save_infrun_state, load_infrun_state): Remove stop_bpstat
argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_bpstat argument, and the code referencing it.
* infcall.c: Include "gdbthread.h".
(call_function_by_hand): Adjust.
* exceptions.c: Include "gdbthread.h".
(throw_exception): Adjust.
* infcmd.c (stop_bpstat): Delete.
(continue_command): In all-stop, set the ignore count on the
thread that reported the stop. In non-stop, set it on the current
thread.
(finish_command_continuation): Adjust.
(program_info): Adjust.
* infrun.c (clear_proceed_status): Adjust.
(context_switch): Don't context-switch stop_bpstat.
(handle_inferior_event): Adjust.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* inf-loop.c (inferior_event_handler): Remove parameter to
bpstat_do_actions call.
* top.c (command_loop): Remove parameter to bpstat_do_actions
call. Call it unconditionally.
* event-top.c (command_handler): Ditto.
* python/python.c (execute_gdb_command): Ditto.
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
* gdbthread.h: Remove unneeded forward declarations.
Include "inferior.h".
(struct thread_info): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi and stop_signal members.
(save_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
(load_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
* thread.c (load_infrun_state): In non-stop mode, load
continuations, intermediate_continuations, proceed_to_finish,
step_over_calls, stop_step, step_multi and stop_signal.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(free_thread): Clear The thread's stop_bpstat.
* inferior.h (context_switch_to): Declare.
* infrun.c (ecss): New global.
(context_switch): Context switch continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(wait_for_inferior): Use global ecss.
(async_ecss, async_ecs): Delete.
(fetch_inferior_event): Use global ecss.
(context_switch_to): New.
* top.c (execute_command): In non-stop, only check if the current
thread is running, in all-stop, check if there's any thread
running.
* breakpoint.c (bpstat_remove_breakpoint): New.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Clear the stop_bpstats of all threads.
* mi/mi-main.c (mi_cmd_execute): In non-stop, only check if the
current thread is running, in all-stop, check if there's any
thread running.
* Makefile.in (gdbthread_h): Depend on $(inferior_h).
* inferior.h (target_executing): Delete.
* gdbthread.h (struct thread_info): Add executing_ field.
(set_executing, is_executing): New.
* thread.c (main_thread_executing): New.
(init_thread_list): Clear it and also main_thread_running.
(is_running): Return false if target has no execution.
(any_running, is_executing, set_executing): New.
* top.c: Include "gdbthread.h".
(target_executing): Delete.
(execute_command): Replace target_executing check by any_running.
* event-top.c: Include "gdbthread.h".
(display_gdb_prompt, command_handler): Replace target_executing by
is_running.
* inf-loop.c: Include "gdbthread.h". Don't mark as not executing
here. Replace target_executing by is_running.
* infrun.c (handle_inferior_event): Mark all threads as
not-executing.
* linux-nat.c (linux_nat_resume): Don't mark thread as executing
here.
* stack.c (get_selected_block): Return null if inferior is
executing.
* target.c (target_resume): Mark resumed ptid as executing.
* breakpoint.c (until_break_command): Replace target_executing
check by is_executing.
* remote.c (remote_async_resume): Don't mark inferior as executing
here.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing
by any_running.
* mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute)
(mi_execute_async_cli_command): Replace target_executing by
is_running.
* frame.c (get_current_frame): Error out if the current thread is
executing.
(has_stack_frames): New.
(get_selected_frame, deprecated_safe_get_selected_frame): Check
has_stack_frames.
* Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on
$(gdbthread_h).
(start_remote): Use STOP_QUIETLY_REMOTE.
(handle_inferior_event): Do not condition TARGET_WAITKIND_LOADED
support on a SOLIB_ADD definition. Update breakpoints_inserted.
Update to match shared library event breakpoint support. Only
resume if appropriate. Handle STOP_QUIETLY_REMOTE.
(normal_stop): Handle TARGET_WAITKIND_LOADED.
* fork-child.c (startup_inferior): Do not set
inferior_ignoring_startup_exec_events
* inferior.h (inferior_ignoring_startup_exec_events): Delete
declaration.
(enum stop_kind): Improve documentation. Add STOP_QUIETLY_REMOTE.
* config/gdbserver.exp (gdb_reconnect): New.
* gdb.base/so-disc-shr.c, gdb.base/solib-disc.c,
gdb.base/solib-disc.exp: New files.
* lib/gdb.exp (gdb_test_multiple): Allow tests to match "Ending
remote debugging".
(gdb_compile): Add shlib_load flag.
* lib/gdbserver-support.exp (gdbserver_run): Save the protocol and
port.
(gdbserver_reconnect): New.
instead of `int' if not already defined.
(call_ptrace): Revert change that replaced PTRACE_ARG3_TYPE with
PTRACE_TYPE_ARG3.
* infptrace.c (call_ptrace): Revert change that replaced
PTRACE_ARG3_TYPE with PTRACE_TYPE_ARG3.
* inferior.h (deprecated_pc_in_call_dummy_at_entry_point): Delete
declaration and out-of-date comment.
* blockframe.c (deprecated_pc_in_call_dummy_at_entry_point):
Delete function.
* mn10300-tdep.c (mn10300_gdbarch_init): Do not set
deprecated_pc_in_call_dummy.
* inferior.h (AT_SYMBOL): Define.
* blockframe.c (inside_entry_file): Check for AT_SYMBOL.
* infcall.c (call_function_by_hand): Add code to handle AT_SYMBOL.
* mips-tdep.c (mips_call_dummy_address): Delete function.
(mips_gdbarch_init): Set call_dummy_location to AT_SYMBOL, do not
set call_dummy_address.
* gdbarch.sh (TARGET_READ_SP): Add predicate, delete default.
* gdbarch.h, gdbarch.c: Regenerate.
* mn10300-tdep.c: Include "gdb_assert.h".
(mn10300_read_fp): New function.
(mn10300_gdbarch_init): Set deprecated_target_read_fp to
mn10300_read_fp. Do not set read_sp to generic_target_read_sp.
* ia64-tdep.c: Include "gdb_assert.h".
(ia64_read_fp): New function.
(ia64_gdbarch_init): Set deprecated_target_read_fp to
ia64_read_sp. Do not set read_sp to generic_target_read_sp.
* regcache.c (generic_target_read_sp): Delete function.
(read_sp): Try TARGET_READ_SP and SP_REGNUM for the SP register.
* inferior.h (generic_target_read_sp): Delete declaration.
* frv-tdep.c (frv_gdbarch_init): Do not set read_sp to
generic_target_read_sp.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* sparc-tdep.c (sparc_gdbarch_init): Ditto
* sh-tdep.c (sh_gdbarch_init): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Ditto.
* Makefile.in (mn10300-tdep.o, ia64-tdep.o): Update dependencies.
* infrun.c (stop_soon_quietly): Make it an enum, to better
override the default behavior of handle_inferior_event.
(clear_proceed_status): Update uses of stop_soon_quietly to
reflect that it is now an enum.
(start_remote): Ditto.
(handle_inferior_event): Change logic a bit if stop_soon_quietly
is set to handle the new GNU/Linux kernel behavior for
attach/sigstop. Update uses of stop_soon_quietly.
* inferior.h (enum stop_kind): New enum.
* infcmd.c (attach_command): Use STOP_QUIETLY_NO_SIGSTOP.
Reset normal handle_inferior_event behavior, afterwards.
* fork-child.c (startup_inferior): Update.
* alpha-tdep.c (heuristic_proc_start): Update.
* solib-svr4.c (svr4_solib_create_inferior_hook): Update.
* solib-sunos.c (sunos_solib_create_inferior_hook): Update.
* solib-osf.c (osf_solib_create_inferior_hook): Update.
* solib-irix.c (irix_solib_create_inferior_hook): Update.
* remote-vx.c (vx_create_inferior): Update.
* mips-tdep.c (heuristic_proc_start): Update.
Tom Tromey