Level of indentation was not proper handled when printing
the elements type's name.
Before:
type = Type t1
integer(kind=4) :: var_1
integer(kind=4) :: var_2
End Type t1
After:
type = Type t1
integer(kind=4) :: var_1
integer(kind=4) :: var_2
End Type t1
2016-05-25 Bernhard Heckel <bernhard.heckel@intel.com>
gdb/Changelog:
* f-typeprint.c (f_type_print_base): Take print level into account.
gdb/testsuite/Changelog:
* gdb.fortran/print_type.exp: Fix expected output.
* gdb.fortran/whatis_type.exp: Fix expected output.
This patch fixes PR python/17386.
The bug is that gdb.Value does not implement the Python __index__
method. This method is needed to convert a Python object to an index
and is used by various operations in Python, such as indexing an
array.
The fix is to implement the nb_index method for gdb.Value.
nb_index was added in Python 2.5. I don't have a good way to test
Python 2.4, but I made an attempt to accomodate it.
I chose to use valpy_long in all cases because this simplifies porting
to Python 3, and because there didn't seem to be any harm.
Built and regtested on x86-64 Fedora 23.
2016-05-24 Tom Tromey <tom@tromey.com>
PR python/17386:
* python/py-value.c (value_object_as_number): Add
nb_inplace_floor_divide, nb_inplace_true_divide, nb_index.
2016-05-24 Tom Tromey <tom@tromey.com>
PR python/17386:
* gdb.python/py-value.exp (test_value_numeric_ops): Add tests that
use value as an index.
Python 2's PyNumberMethods has nb_inplace_divide, but Python 3 does
not. This patch adds it for Python 2.
This buglet didn't cause much fallout because the only non-NULL entry
in value_object_as_number after this is for valpy_divide; and the
missing slot caused it to slide up to nb_floor_divide (where
nb_true_divide was intended).
2016-05-24 Tom Tromey <tom@tromey.com>
* python/py-value.c (value_object_as_number): Add
nb_inplace_divide for Python 2.
PR python/17981 notes that gdb.breakpoints() returns None when there
are no breakpoints; whereas an empty list or tuple would be more in
keeping with Python and the documentation.
This patch fixes the bug by changing the no-breakpoint return to make
an empty tuple.
Built and regtested on x86-64 Fedora 23.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/17981:
* python/py-breakpoint.c (gdbpy_breakpoints): Return a new tuple
when there are no breakpoints.
2016-05-23 Tom Tromey <tom@tromey.com>
* python.texi (Basic Python): Document gdb.breakpoints return.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/17981:
* gdb.python/py-breakpoint.exp (test_bkpt_basic): Add test for
no-breakpoint case.
PR gdb/19194 points out a typo in the documentation. I'm checking
this in as obvious.
2016-05-24 Tom Tromey <tom@tromey.com>
PR gdb/19194:
* gdb.texinfo (gdb man): Fix typo.
When GDB attaches to a process, it looks at the /proc/PID/task/ dir
for all clone threads of that process, and attaches to each of them.
Usually, if there is more than one clone thread, it means the program
is multi threaded and linked with pthreads. Thus when GDB soon after
attaching finds and loads a libthread_db matching the process, it'll
add a thread to the thread list for each of the initially found
lower-level LWPs.
If, however, GDB fails to find/load a matching libthread_db, nothing
is adding the LWPs to the thread list. And because of that, "detach"
hits an internal error:
(gdb) PASS: gdb.threads/clone-attach-detach.exp: fg attach 1: attach
info threads
Id Target Id Frame
* 1 LWP 6891 "clone-attach-de" 0x00007f87e5fd0790 in __nanosleep_nocancel () at ../sysdeps/unix/syscall-template.S:84
(gdb) FAIL: gdb.threads/clone-attach-detach.exp: fg attach 1: info threads shows two LWPs
detach
.../src/gdb/thread.c:1010: internal-error: is_executing: Assertion `tp' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
FAIL: gdb.threads/clone-attach-detach.exp: fg attach 1: detach (GDB internal error)
From here:
...
#8 0x00000000007ba7cc in internal_error (file=0x98ea68 ".../src/gdb/thread.c", line=1010, fmt=0x98ea30 "%s: Assertion `%s' failed.")
at .../src/gdb/common/errors.c:55
#9 0x000000000064bb83 in is_executing (ptid=...) at .../src/gdb/thread.c:1010
#10 0x00000000004c23bb in get_pending_status (lp=0x12c5cc0, status=0x7fffffffdc0c) at .../src/gdb/linux-nat.c:1235
#11 0x00000000004c2738 in detach_callback (lp=0x12c5cc0, data=0x0) at .../src/gdb/linux-nat.c:1317
#12 0x00000000004c1a2a in iterate_over_lwps (filter=..., callback=0x4c2599 <detach_callback>, data=0x0) at .../src/gdb/linux-nat.c:899
#13 0x00000000004c295c in linux_nat_detach (ops=0xe7bd30, args=0x0, from_tty=1) at .../src/gdb/linux-nat.c:1358
#14 0x000000000068284d in delegate_detach (self=0xe7bd30, arg1=0x0, arg2=1) at .../src/gdb/target-delegates.c:34
#15 0x0000000000694141 in target_detach (args=0x0, from_tty=1) at .../src/gdb/target.c:2241
#16 0x0000000000630582 in detach_command (args=0x0, from_tty=1) at .../src/gdb/infcmd.c:2975
...
Tested on x86-64 Fedora 23. Also confirmed the test passes against
gdbserver with "maint set target-non-stop".
gdb/ChangeLog:
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (attach_proc_task_lwp_callback): Mark the lwp
resumed, and add the thread to GDB's thread list.
testsuite/ChangeLog:
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* gdb.threads/clone-attach-detach.c: New file.
* gdb.threads/clone-attach-detach.exp: New file.
Working on the fix for gdb/19828, I saw
gdb.threads/attach-many-short-lived-threads.exp fail once in an
unusual way. Unfortunately I didn't keep debug logs, but it's an
issue similar to what's been fixed in remote.c a while ago --
linux-nat.c was not fetching the pending status from the right place.
gdb/ChangeLog:
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (get_pending_status): If the thread reported the
event to the core and it's pending, use the pending status signal
number.
Hacking the gdb.threads/attach-many-short-lived-threads.exp test to
spawn thousands of threads instead of dozens, and running gdb under
perf, I saw that GDB was spending most of the time in find_lwp_pid:
- captured_main
- 93.61% catch_command_errors
- 87.41% attach_command
- 87.40% linux_nat_attach
- 87.40% linux_proc_attach_tgid_threads
- 82.38% attach_proc_task_lwp_callback
- 81.01% find_lwp_pid
5.30% ptid_get_lwp
+ 0.10% ptid_lwp_p
+ 0.64% add_thread
+ 0.26% set_running
+ 0.24% set_executing
0.12% ptid_get_lwp
+ 0.01% ptrace
+ 0.01% add_lwp
attach_proc_task_lwp_callback is called once for each LWP that we
attach to, found by listing the /proc/PID/task/ directory. In turn,
attach_proc_task_lwp_callback calls find_lwp_pid to check whether the
LWP we're about to try to attach to is already known. Since
find_lwp_pid does a linear walk over the whole LWP list, this becomes
quadratic. We do the /proc/PID/task/ listing until we get two
iterations in a row where we found no new threads. So the second and
following times we walk the /proc/PID/task/ dir, we're going to take
an even worse find_lwp_pid hit.
Fix this by adding a hash table keyed by LWP PID, for fast lookup.
The linked list embedded in the LWP structure itself is kept, and made
a double-linked list, so that removals from that list are O(1). An
earlier version of this patch got rid of this list altogether, but
that revealed hidden dependencies / assumptions on how the list is
sorted. For example, killing a process and then waiting for all the
LWPs status using iterate_over_lwps only works as is because the
leader LWP is always last in the list. So I thought it better to take
an incremental approach and make this patch concern itself _only_ with
the PID lookup optimization.
gdb/ChangeLog:
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (lwp_lwpid_htab): New htab.
(lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
(lwp_lwpid_htab_add_lwp): New functions.
(lwp_list): Tweak comment.
(lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
functions.
(purge_lwp_list): Rewrite, using htab_traverse_noresize.
(add_initial_lwp): Add lwp to htab too. Use lwp_list_add.
(delete_lwp): Use lwp_list_remove. Remove htab too.
(find_lwp_pid): Search in htab.
(_initialize_linux_nat): Call lwp_lwpid_htab_create.
* linux-nat.h (struct lwp_info) <prev>: New field.
Hacking the gdb.threads/attach-many-short-lived-threads.exp test to
spawn thousands of threads instead of dozens, I saw GDB having trouble
keeping up with threads being spawned too fast, when it tried to stop
them all. This was because while gdb is doing that, it updates the
thread list to make sure no new thread has sneaked in that might need
to be paused. It does this a few times until it sees no-new-threads
twice in a row. The thread listing update itself is not that
expensive, however, in the Linux backend, updating the threads list
calls linux_common_core_of_thread for each LWP to record on which core
each LWP was last seen running, which opens/reads/closes a /proc file
for each LWP which becomes expensive when you need to do it for
thousands of LWPs.
perf shows gdb in linux_common_core_of_thread 44% of the time, in the
stop_all_threads -> update_thread_list path in this use case.
This patch simply makes linux_common_core_of_thread avoid updating the
core the thread is bound to if the thread hasn't run since the last
time we updated that info. This makes linux_common_core_of_thread
disappear into the noise in the perf report.
gdb/ChangeLog:
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (linux_resume_one_lwp_throw): Clear the LWP's core
field.
(linux_nat_update_thread_list): Don't fetch the core if already
known.
... as it's _much_ faster.
Hacking the gdb.threads/attach-many-short-lived-threads.exp test to
spawn thousands of threads instead of dozens to stress and debug
timeout problems with gdb.threads/attach-many-short-lived-threads.exp,
I saw that GDB would spend several seconds just reading the
/proc/PID/smaps file, to determine the vDSO mapping range. GDB opens
and reads the whole file just once, and caches the result, but even
that is too slow. For example, with almost 8000 threads:
$ ls /proc/3518/task/ | wc -l
7906
reading the /proc/PID/smaps file grepping for "vdso" takes over 15
seconds :
$ time cat /proc/3518/smaps | grep vdso
7ffdbafee000-7ffdbaff0000 r-xp 00000000 00:00 0 [vdso]
real 0m15.371s
user 0m0.008s
sys 0m15.017s
Looking around the web for hints, I found a nice description of the
issue here:
http://backtrace.io/blog/blog/2014/11/12/large-thread-counts-and-slow-process-maps/
The problem is that /proc/PID/smaps wants to show the mappings as
being thread stack, and that has the kernel iterating over all threads
in the thread group, for each mapping.
The fix is to use the "map" file under /proc/PID/task/PID/ instead of
the /proc/PID/ one, as the former doesn't mark thread stacks for all
threads.
That alone drops the timing to the millisecond range on my machine:
$ time cat /proc/3518/task/3518/smaps | grep vdso
7ffdbafee000-7ffdbaff0000 r-xp 00000000 00:00 0 [vdso]
real 0m0.150s
user 0m0.009s
sys 0m0.084s
And since we only need the vdso mapping's address range, we can use
"maps" file instead of "smaps", and it's even cheaper:
/proc/PID/task/PID/maps :
$ time cat /proc/3518/task/3518/maps | grep vdso
7ffdbafee000-7ffdbaff0000 r-xp 00000000 00:00 0 [vdso]
real 0m0.027s
user 0m0.000s
sys 0m0.017s
gdb/ChangeLog:
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-tdep.c (find_mapping_size): Delete.
(linux_vsyscall_range_raw): Rewrite reading from
/proc/PID/task/PID/maps directly instead of using
gdbarch_find_memory_regions.
A following patch (fix for gdb/19828) makes linux-nat.c add threads to
GDB's thread list earlier in the "attach" sequence, and that causes a
surprising regression on
gdb.threads/attach-many-short-lived-threads.exp on my machine. The
extra "thread x exited" handling and traffic slows down that test
enough that GDB core has trouble keeping up with new threads that are
spawned while trying to stop existing ones.
I saw the exact same issue with remote/gdbserver a while ago and fixed
it in 65706a29ba (Remote thread create/exit events) so part of the
fix here is the exact same -- add support for thread created events to
gdb/linux-nat.c. infrun.c:stop_all_threads enables those events when
it tries to stop threads, which ensures that new threads never get a
chance to themselves start new threads, thus fixing the race.
gdb/
2016-05-24 Pedro Alves <palves@redhat.com>
PR gdb/19828
* linux-nat.c (report_thread_events): New global.
(linux_handle_extended_wait): Report
TARGET_WAITKIND_THREAD_CREATED if thread event reporting is
enabled.
(wait_lwp, linux_nat_filter_event): Report all thread exits if
thread event reporting is enabled. Remove comment.
(filter_exit_event): New function.
(linux_nat_wait_1): Use it.
(linux_nat_thread_events): New function.
(linux_nat_add_target): Install it as target_thread_events method.
This patch fixes a syntax error which caused a failure in
annota-input-while-running.exp to crash the test suite runner.
2016-05-24 Francis Ricci <francisjricci@gmail.com>
* gdb.base/annota-input-while-running.exp: Fix syntax error.
Nowadays, GDB can't insert breakpoint on the return address of the
exception handler on ARM M-profile, because the address is a magic
one 0xfffffff9,
(gdb) bt
#0 CT32B1_IRQHandler () at ../src/timer.c:67
#1 <signal handler called>
#2 main () at ../src/timer.c:127
(gdb) info frame
Stack level 0, frame at 0x200ffa8:
pc = 0x4ec in CT32B1_IRQHandler (../src/timer.c:67); saved pc = 0xfffffff9
called by frame at 0x200ffc8
source language c.
Arglist at 0x200ffa0, args:
Locals at 0x200ffa0, Previous frame's sp is 0x200ffa8
Saved registers:
r7 at 0x200ffa0, lr at 0x200ffa4
(gdb) x/x 0xfffffff9
0xfffffff9: Cannot access memory at address 0xfffffff9
(gdb) finish
Run till exit from #0 CT32B1_IRQHandler () at ../src/timer.c:67
Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?)
Warning:
Cannot insert hardware breakpoint 0.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
Command aborted.
even some debug probe can't set hardware breakpoint on the magic
address too,
(gdb) hbreak *0xfffffff9
Hardware assisted breakpoint 2 at 0xfffffff9
(gdb) c
Continuing.
Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?)
Warning:
Cannot insert hardware breakpoint 2.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
Command aborted.
The problem described above is quite similar to PR 8841, in which GDB
can't set breakpoint on signal trampoline, which is mapped to a read-only
page by kernel. The rationale of this patch is to skip "unwritable"
frames when looking for caller frames in command "finish", and a new
gdbarch method code_of_frame_writable is added. This patch fixes
the problem on ARM cortex-m target, but it can be used to fix
PR 8841 too.
gdb:
2016-05-10 Yao Qi <yao.qi@arm.com>
* arch-utils.c (default_code_of_frame_writable): New function.
* arch-utils.h (default_code_of_frame_writable): Declare.
* arm-tdep.c (arm_code_of_frame_writable): New function.
(arm_gdbarch_init): Install gdbarch method
code_of_frame_writable if the target is M-profile.
* frame.c (skip_unwritable_frames): New function.
* frame.h (skip_unwritable_frames): Declare.
* gdbarch.sh (code_of_frame_writable): New.
* gdbarch.c, gdbarch.h: Re-generated.
* infcmd.c (finish_command): Call skip_unwritable_frames.
This fixes PR python/19438 and PR python/18393. Both bugs are about
invoking dir() on some Python object implemented by gdb, and getting a
crash.
The crash happens because the dictionary field of these objects was
not initialized. Apparently what happens is that this field can be
lazily initialized by Python when assigning to an attribute; and it
can also be handled ok when using dir() but without __dict__ defined;
but gdb defines __dict__ because this isn't supplied automatically by
Python.
The docs on this seem rather sparse, but this patch works ok.
An alternative might be to lazily create the dictionary in
gdb_py_generic_dict, but I went with this approach because it seemed
more straightforward.
Built and regtested on x86-64 Fedora 23.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/19438, PR python/18393:
* python/py-objfile.c (objfpy_initialize): Initialize self->dict.
* python/py-progspace.c (pspy_initialize): Initialize self->dict.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/19438, PR python/18393:
* gdb.python/py-progspace.exp: Add "dir" test.
* gdb.python/py-objfile.exp: Add "dir" test.
This patch fixes the errors below:
Running /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.arch/thumb-prologue.exp ...
gdb compile failed, arm-linux-gnueabihf/bin/ld: cannot open output file /scratch/yao/gdb/build-git/arm-linux-gnueabihf/gdb/testsuite/gdb.arch/thumb-prologue: No such file or directory
collect2: error: ld returned 1 exit status
Running /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.arch/thumb2-it.exp ...
gdb compile failed, arm-linux-gnueabihf/bin/ld: cannot open output file /scratch/yao/gdb/build-git/arm-linux-gnueabihf/gdb/testsuite/gdb.arch/thumb2-it: No such file or directory
gdb/testsuite:
2016-05-23 Yao Qi <yao.qi@linaro.org>
* gdb.arch/thumb-prologue.exp: Use standard_testfile.
* gdb.arch/thumb2-it.exp: Likewise.
Native GDB looks up the function td_thr_validate from libthread_db.so
on Linux, but the value is never used. This commit removes this dead
code.
gdb/ChangeLog:
* nat/gdb_thread_db.h (td_thr_validate_ftype): Remove typedef.
* linux-thread-db.c (struct thread_db_info) <td_thr_validate_p>:
Remove field.
(try_thread_db_load_1): Remove td_thr_validate initialization.
GDB needs kinfo_getvmmap() on GNU/kFreeBSD systems same as on
pure FreeBSD. However on these systems the FreeBSD version of libutil
is renamed to libutil-freebsd.
2016-05-23 Jon Boden <jon@ubuntubsd.org>
* configure.ac: Search for libutil-freebsd as alternative to libutil.
* configure: Re-generated.
Add a new test for PR 20039. The test spawns new threads, then tries to
interrupt, continue, and interrupt again. This use case was fixed by
commit 5fe966540d in master, but gdb 7.11
is affected (so if you try it on the gdb-7.11-branch right now, the test
will fail).
New in v2, the test now handles mi-async on mode properly. The failure
was specific to mi-async off, but I don't think it's bad to test the
same thing under async on mode. I added a little hack when running in
async mode to work around bug 20045.
I also removed one continue/interrupt pair, as a single one was enough to
trigger the problem.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-threads-interrupt.c: New file.
* gdb.mi/mi-threads-interrupt.exp: New file.
When you use a run control command (-exec-run, -exec-continue,
-exec-next, ...) with mi-async on, an extra (gdb) prompt is displayed:
-exec-continue
^running
*running,thread-id="all"
(gdb)
(gdb)
It doesn't seem to be a big problem for front-ends, since this behavior
started in gdb 7.9 and we haven't heard anything about that. However,
it caused me some trouble while writing a test for PR 20039 [1].
The problem comes from an extra (gdb) prompt that we write when running
in mi-async off mode to emulate a past buggy behavior. When executing a
run control command synchronously, previous gdbs always printed a prompt
right away, even though they are not ready to accept new MI commands
until the target stops. Only at this time should they display a prompt.
But to keep backwards compatibility apparently, we print it anyway.
Since commit 198297aaf, the condition that decides whether we should
print that "bogus" prompt or not has become true, even when running with
mi-async on. Since we already print a prompt at the end of the
asynchronous command execution, it results in two prompts for one
command.
The proposed fix is to call target_can_async_p instead of
target_is_async_p, to make the condition:
if (!target_can_async_p () || sync_execution)
... show prompt ...
That shows the prompt if we are emulating a synchronous command on top
of an asynchronous target (sync_execution) or if the target simply can't
run asynchronously (!target_can_async_p ()).
Note that this code is changed and this bug fixed by Pedro's separate
console series, but I think it would be nice to have it fixed in the
mean time.
I ran the gdb.mi directory of the testsuite with mi-async on and off, I
didn't see any regressions.
gdb/ChangeLog:
* mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
of target_is_async_p.
[1] https://sourceware.org/ml/gdb-patches/2016-05/msg00075.html
When doing -exec-run on a freshly started GDB, the only target on the
target stack at the time the dummy one. When mi_async_p is called to
know whether the run should be async, it queries whether the current
target (dummy) supports async, and the answer is no. The fix is to make
the code query the target that will be used for the run, which is not
necessarily the current target.
No regressions in the gdb.mi directory using the unix, native-gdbserver
and native-extended-gdbserver boards. The test doesn't pass when
forcing maint set target-async off, obviously, since it makes mi-async
have no effect. It doesn't seem like other tests are checking for that
eventuality, so I didn't in the new test.
gdb/ChangeLog:
* mi/mi-main.c (run_one_inferior): Use run target to determine
whether to run async or not.
(mi_cmd_exec_run): Likewise.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-async-run.exp: New file.
* gdb.mi/mi-async-run.c: New file.
This patch adds documentation for the new Rust support in gdb.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add Rust item.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Supported Languages): Mention Rust. Update menu.
(Rust): New node.
This updates the gdb test suite for Rust.
2016-05-17 Tom Tromey <tom@tromey.com>
Manish Goregaokar <manishsmail@gmail.com>
* lib/rust-support.exp: New file.
* lib/gdb.exp (skip_rust_tests): New proc.
(build_executable_from_specs): Handle rust.
* lib/future.exp (gdb_find_rustc): New proc.
(gdb_default_target_compile): Handle rust.
* gdb.rust/expr.exp: New file.
* gdb.rust/generics.exp: New file.
* gdb.rust/generics.rs: New file.
* gdb.rust/methods.exp: New file.
* gdb.rust/methods.rs: New file.
* gdb.rust/modules.exp: New file.
* gdb.rust/modules.rs: New file.
* gdb.rust/simple.exp: New file.
* gdb.rust/simple.rs: New file.
For Rust value-printing, I wanted to use generic_val_print_array, but
I also wanted to control the starting and ending strings.
This patch adds new strings to generic_val_print_decorations, updates
generic_val_print_array to use them, and updates all the existing
instances of generic_val_print_decorations.
2016-05-17 Tom Tromey <tom@tromey.com>
* valprint.h (struct generic_val_print_array) <array_start,
array_end>: New fields.
* valprint.c (generic_val_print_array): Add "decorations"
parameter. Use "array_start", "array_end".
(generic_val_print) <TYPE_CODE_ARRAY>: Update.
* p-valprint.c (p_decorations): Update.
* m2-valprint.c (m2_decorations): Update.
* f-valprint.c (f_decorations): Update.
* c-valprint.c (c_decorations): Update.
I wanted to unit test the Rust lexer, so I added a simple unit testing
command to gdb.
The intent is that self tests will only be compiled into gdb in
development mode. In release mode they simply won't exist. So, this
exposes $development to C code as GDB_SELF_TEST.
In development mode, test functions are registered with the self test
module. A test function is just a function that does some checks, and
throws an exception on failure.
Then this adds a new "maint selftest" command which invokes the test
functions, and a new dejagnu test case that invokes it.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add "maint selftest" entry.
* selftest.h: New file.
* selftest.c: New file.
* maint.c: Include selftest.h.
(maintenance_selftest): New function.
(_initialize_maint_cmds): Add "maint selftest" command.
* configure.ac (GDB_SELF_TEST): Maybe define.
* config.in, configure: Rebuild.
* Makefile.in (SFILES): Add selftest.c.
(COMMON_OBS): Add selftest.o.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document "maint selftest".
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.gdb/unittest.exp: New file.
print_subexp_standard and dump_subexp_body_standard did not handle
OP_F90_RANGE. Attempting to dump an expression using this opcode
would fail.
This patch adds support for this opcode to these functions.
2016-05-17 Tom Tromey <tom@tromey.com>
* expprint.c: Include f-lang.h.
(print_subexp_standard, dump_subexp_body_standard): Handle
OP_F90_RANGE.
gdb's Makefile.in does not currently scan .y files to add global
initializers from these files to init.c. However, at least ada-exp.y
tries to use this feature.
This patch fixes the problem.
2016-05-17 Tom Tromey <tom@tromey.com>
* Makefile.in (init.c): Search .y files for initialization
functions.
This patch is to replace find_inferior (&all_threads, unsuspend_one_lwp, NULL)
with unsuspend_all_lwps (NULL), which is shorter. They are equivalent
to each other.
gdb/gdbserver:
2016-05-17 Yao Qi <yao.qi@linaro.org>
* linux-low.c (linux_stabilize_threads): Call unsuspend_all_lwps
instead of find_inferior.
batch-preserve-term-settings.exp fails if the shell prompt isn't $. It
is # in our testing env. In fact, the shell prompt can be anything.
The perfect solution would be "set_board_info shell_prompt" in the
host board file, and use board_info shell_prompt in
batch-preserve-term-settings.exp. This is a little bit overkill to
me, and we still need to figure out the different prompts on different
shells. I also tried to start shell with the prompt preset, but there is
not unique way to set shell prompt in different shells, so I give up.
It is reasonably simple to match either $ or # for the shell prompt, and
we can easily extend it to match other char, like >.
gdb/testsuite:
2016-05-16 Yao Qi <yao.qi@linaro.org>
* gdb.base/batch-preserve-term-settings.exp: Remove variable
shell_prompt. Update shell_prompt_re.
gdb/ChangeLog:
* dwarf2loc.c (dwarf2_find_location_expression): For DWO files still
add base_offset.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (build_executable_from_fission_assembler): Pass
$options when building executable.
* gdb.dwarf2/fission-loclists-pie.c: New file.
* gdb.dwarf2/fission-loclists-pie.exp: New file.
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf32-arm.c (elf32_arm_size_stubs): Use new macros
ARM_GET_SYM_BRANCH_TYPE and ARM_SET_SYM_BRANCH_TYPE to respectively get
and set branch type of a symbol.
(bfd_elf32_arm_process_before_allocation): Likewise.
(elf32_arm_relocate_section): Likewise and fix identation along the
way.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_symbol): Likewise.
(elf32_arm_swap_symbol_in): Likewise.
(elf32_arm_swap_symbol_out): Likewise.
gas/
* config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to
set branch type of a symbol.
gdb/
* arm-tdep.c (arm_elf_make_msymbol_special): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
include/
* arm.h (enum arm_st_branch_type): Add new ST_BRANCH_ENUM_SIZE
enumerator.
(NUM_ENUM_ARM_ST_BRANCH_TYPE_BITS): New macro.
(ENUM_ARM_ST_BRANCH_TYPE_BITMASK): Likewise.
(ARM_SYM_BRANCH_TYPE): Replace by ...
(ARM_GET_SYM_BRANCH_TYPE): This and ...
(ARM_SET_SYM_BRANCH_TYPE): This in two versions depending on whether
BFD_ASSERT is defined or not.
ld/
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
opcodes/
* arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get
branch type of a symbol.
(print_insn): Likewise.
This patch initialize res to zero, otherwise, it may have some garbage
bits after the *the_target->read_memory call.
gdb/gdbserver:
2016-05-05 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (get_next_pcs_read_memory_unsigned_integer):
Initialize res to zero.
Variable cpsr holds the value of cpsr register, which is 32-bit. It
is better to explicitly use uint32_t.
gdb/gdbserver:
2016-05-05 Yao Qi <yao.qi@linaro.org>
* linux-arm-low.c (arm_sigreturn_next_pc): Change type of cpsr
to uint32_t.
ChangeLog:
* spu-linux-nat.c (spu_bfd_iovec_pread): Add pointer cast for C++.
(spu_bfd_open): Likewise.
gdbserver/ChangeLog:
* spu-low.c (fetch_ppc_register): Cast PowerPC-Linux-specific value
used as first ptrace argument to PTRACE_TYPE_ARG1 for C++.
(fetch_ppc_memory_1, store_ppc_memory_1): Likewise.
Nowadays, read_memory may throw NOT_AVAILABLE_ERROR (it is done by
patch http://sourceware.org/ml/gdb-patches/2013-08/msg00625.html)
however, read_stack and read_code still throws MEMORY_ERROR only. This
causes PR 19947, that is prologue unwinder is unable unwind because
code memory isn't available, but MEMORY_ERROR is thrown, while unwinder
catches NOT_AVAILABLE_ERROR.
#0 memory_error (err=err@entry=TARGET_XFER_E_IO, memaddr=memaddr@entry=140737349781158) at /home/yao/SourceCode/gnu/gdb/git/gdb/corefile.c:217
#1 0x000000000065f5ba in read_code (memaddr=memaddr@entry=140737349781158, myaddr=myaddr@entry=0x7fffffffd7b0 "\340\023<\001", len=len@entry=1)
at /home/yao/SourceCode/gnu/gdb/git/gdb/corefile.c:288
#2 0x000000000065f7b5 in read_code_unsigned_integer (memaddr=memaddr@entry=140737349781158, len=len@entry=1, byte_order=byte_order@entry=BFD_ENDIAN_LITTLE)
at /home/yao/SourceCode/gnu/gdb/git/gdb/corefile.c:363
#3 0x00000000004717e0 in amd64_analyze_prologue (gdbarch=gdbarch@entry=0x13c13e0, pc=140737349781158, current_pc=140737349781165, cache=cache@entry=0xda0cb0)
at /home/yao/SourceCode/gnu/gdb/git/gdb/amd64-tdep.c:2267
#4 0x0000000000471f6d in amd64_frame_cache_1 (cache=0xda0cb0, this_frame=0xda0bf0) at /home/yao/SourceCode/gnu/gdb/git/gdb/amd64-tdep.c:2437
#5 amd64_frame_cache (this_frame=0xda0bf0, this_cache=<optimised out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/amd64-tdep.c:2508
#6 0x000000000047214d in amd64_frame_this_id (this_frame=<optimised out>, this_cache=<optimised out>, this_id=0xda0c50)
at /home/yao/SourceCode/gnu/gdb/git/gdb/amd64-tdep.c:2541
#7 0x00000000006b94c4 in compute_frame_id (fi=0xda0bf0) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:481
#8 get_prev_frame_if_no_cycle (this_frame=this_frame@entry=0xda0b20) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1809
#9 0x00000000006bb6c9 in get_prev_frame_always_1 (this_frame=0xda0b20) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1983
#10 get_prev_frame_always (this_frame=this_frame@entry=0xda0b20) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1999
#11 0x00000000006bbe11 in get_prev_frame (this_frame=this_frame@entry=0xda0b20) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:2241
#12 0x00000000006bc13c in unwind_to_current_frame (ui_out=<optimised out>, args=args@entry=0xda0b20) at /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1485
The fix is to let read_stack and read_code throw NOT_AVAILABLE_ERROR too,
in order to align with read_memory.
gdb:
2016-05-04 Yao Qi <yao.qi@linaro.org>
PR gdb/19947
* corefile.c (read_memory): Rename it to ...
(read_memory_object): ... it. Add parameter object.
(read_memory): Call read_memory_object.
(read_stack): Likewise.
(read_code): Likewise.
This test currently uses [is_remote target] to check if the test is
supported. This is not quite correct, as the limitation is actually
that it requires support for "running", ruling out stub-like targets.
Therefore, it should check for use_gdb_stub.
This has no visible effect right now, but it will once we make the
native-gdbserver board non-dejagnu-remote.
gdb/testsuite/ChangeLog:
* gdb.base/solib-display.exp: Check for [use_gdb_stub] instead
of [is_remote target],
This patch introduces the use_gdb_stub procedure, which allows getting
the right value of the use_gdb_stub variable/property in any all
situations.
When calling it before the $use_gdb_stub global variable has been set,
it will return the value of the use_gdb_stub property from the board
file. This happens when tests want to bail out early (even before gdb
has been started) when the current test setup is a stub.
Otherwise, it returns the value of the $use_gdb_stub global.
It's possible for these two to differ when a test file overrides the
value of the global.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (use_gdb_stub): New procedure.
PR symtab/19914
* dwarf2read.c (open_and_init_dwp_file): Look at backlink if objfile
is separate debug file.
testsuite/
* gdb.dwarf2/dwp-sepdebug.c: New file.
* gdb.dwarf2/dwp-sepdebug.exp: New file.
Valgrind shows:
==26964== Invalid read of size 1
==26964== at 0x6E14100: __GI_strcmp (strcmp.S:180)
==26964== by 0x6DB55AA: setlocale (setlocale.c:238)
==26964== by 0x4E0455: _initialize_python() (python.c:1731)
==26964== by 0x786731: initialize_all_files() (init.c:319)
==26964== by 0x72EF0A: gdb_init(char*) (top.c:1929)
==26964== by 0x60BCAC: captured_main(void*) (main.c:863)
==26964== by 0x606AD5: catch_errors(int (*)(void*), void*, char*, return_mask) (exceptions.c:234)
==26964== by 0x60C608: gdb_main(captured_main_args*) (main.c:1165)
==26964== by 0x40CAEC: main (gdb.c:32)
==26964== Address 0x81d30a0 is 0 bytes inside a block of size 181 free'd
==26964== at 0x4C29CF0: free (vg_replace_malloc.c:530)
==26964== by 0x6DB5B65: setname (setlocale.c:201)
==26964== by 0x6DB5B65: setlocale (setlocale.c:388)
==26964== by 0x4E037F: _initialize_python() (python.c:1712)
==26964== by 0x786731: initialize_all_files() (init.c:319)
==26964== by 0x72EF0A: gdb_init(char*) (top.c:1929)
==26964== by 0x60BCAC: captured_main(void*) (main.c:863)
==26964== by 0x606AD5: catch_errors(int (*)(void*), void*, char*, return_mask) (exceptions.c:234)
==26964== by 0x60C608: gdb_main(captured_main_args*) (main.c:1165)
==26964== by 0x40CAEC: main (gdb.c:32)
The problem is doing this:
oldloc = setlocale (LC_ALL, NULL);
setlocale (LC_ALL, "");
...
setlocale (LC_ALL, oldloc);
I.e., the second setlocale call frees 'oldloc'.
From http://pubs.opengroup.org/onlinepubs/9699919799/functions/setlocale.html :
"The returned string pointer might be invalidated or the string
content might be overwritten by a subsequent call to setlocale()."
gdb/ChangeLog:
2016-05-03 Pedro Alves <palves@redhat.com>
PR python/20037
* python/python.c (_initialize_python) [IS_PY3K]: xstrdup/xfree
oldloc.
This makes no sense -- strlen doesn't really ever fail with -1.
gdb/ChangeLog:
2016-05-03 Pedro Alves <palves@redhat.com>
* python/python.c (_initialize_python) [IS_PY3K]: Remove dead
code.
GDB's use of --dynamic-list to only export the proc-service symbols is
broken due to Python's "python-config --ldflags" saying we should link
with -export-dynamic, causing us to export _all_ extern symbols
anyway. On Fedora 23:
$ python-config --ldflags
-lpython2.7 -lpthread -ldl -lutil -lm -Xlinker -export-dynamic
$ python3.4-config --ldflags
-L/usr/lib64 -lpython3.4m -lpthread -ldl -lutil -lm -Xlinker -export-dynamic
Having GDB export all its symbols leads to issues such as PR gdb/16818
(GDB crashes when using name for target remote hostname:port), where a
GDB symbol unintentionally preempts a symbol in one of the NSS modules
glibc loads into the process. NSS modules should not define symbols
outside the implementation namespace or the relevant standards, but,
alas, that's a longstanding and hard to fix issue. See libc-alpha
discussion at:
[symbol name space issues with NSS modules]
https://sourceware.org/ml/libc-alpha/2016-04/msg00130.html
Python should instead be either using GCC's symbol visibility feature
or -Wl,--dynamic-list as well, to only export Python API symbols, but,
it doesn't. There are bugs open upstream for that:
[Use -Wl,--dynamic-list=x.list, not -Xlinker -export-dynamic]
http://bugs.python.org/issue10112
[Use GCC visibility attrs in PyAPI_*]
http://bugs.python.org/issue11410
But that's taking a long while to resolve.
I thought of working around this Python issue by making GDB build with
-fvisibility=hidden, as Jan suggests in Python issue 10112, as then
Python's "-Xlinker -export-dynamic" has no effect. However, that
would need to be done in the whole source tree (bfd, libiberty, etc.),
and I think that would break GCC plugins, as I believe those have
access to all of GCCs symbols, by "design". So we'd need a new
configure switch, or have the libraries in the tree detect which of
GCC or GDB is being built, but that doesn't work, because the answer
can be "both" with combined builds...
So this patch instead works around Python's bug, by simply sed'ing
away "-Xlinker -export-dynamic" from the result of python-config.py
--ldflags, making -Wl,--dynamic-list work again as it used to. It's
ugly, but so is the bug...
Note that if -Wl,--dynamic-list doesn't work, we always link with
-rdynamic, so static Python should still work.
Tested on F23 with --python=python (Python 2.7) and
--python=python3.4.
gdb/ChangeLog:y
2016-05-03 Pedro Alves <palves@redhat.com>
* configure.ac (PYTHON_LIBS): Sed away "-Xlinker -export-dynamic".
* configure: Regenerate.
Bernhard Heckel
Tom Tromey
Pedro Alves
Francis Ricci
Yan-Ting Lin
Yao Qi
Yao Qi
Gary Benson
Jon Boden
Andreas Schwab
Simon Marchi
Doug Evans
Trevor Saunders
Thomas Preud'homme
Ulrich Weigand
Don Breazeal