binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* testsuite/binutils-all/dw5.S: New file.
* testsuite/binutils-all/dw5.W: New file.
* testsuite/binutils-all/readelf.exp (readelf -wiaoRlL): New test.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (decode_location_expression): Support DW_OP_implicit_pointer,
DW_OP_const_type, DW_OP_regval_type, DW_OP_deref_type, DW_OP_convert
and DW_OP_reinterpret.
(read_and_display_attr_value): Support DW_AT_call_value,
DW_AT_call_data_value, DW_AT_call_target and
DW_AT_call_target_clobbered.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (fetch_indirect_line_string): New function.
(abbrev_attr): New field implicit_const.
(add_abbrev_attr): New parameter implicit_const.
(process_abbrev_section): Support DW_FORM_implicit_const.
(decode_location_expression): Support DW_OP_entry_value.
(read_and_display_attr_value): Add parameter implicit_const. Support
DW_FORM_line_strp and DW_FORM_implicit_const.
(read_and_display_attr): Add parameter implicit_const.
(process_debug_info): Support line_str and DWARF-5.
(read_debug_line_header): Support DWARF-5.
(display_formatted_table): New function.
(display_debug_lines_raw): New parameter file. Support DWARF-5.
(display_debug_lines_decoded): New parameter fileptr. Support DWARF-5.
(display_debug_lines): Pass file parameter.
(display_debug_macro): Update read_and_display_attr_value caller.
(display_debug_abbrev): Support DW_FORM_implicit_const.
(display_loclists_list): New function.
(display_loc_list): Support .debug_loclists.
(display_debug_ranges_list): New function from display_debug_ranges.
(display_debug_rnglists_list): New function.
(display_debug_ranges): Support .debug_rnglists.
(debug_displays): Add .debug_line_str, .debug_loclists and
.debug_rnglists.
* dwarf.h: Include dwarf2.h
(DWARF2_Internal_LineInfo): Add li_offset_size.
(DWARF2_Internal_CompUnit): Add cu_unit_type.
(enum dwarf_section_display_enum): Add line_str.
* readelf.c (process_section_headers): Add rnglists and loclists.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (display_loc_list): Use dwarf_vma for offset, base_address
and off.
(display_loc_list_dwo): Use dwarf_vma for offset.
(display_debug_loc): Use dwarf_vma for offset, base_address.
(struct range_entry, range_entry_compar): Use dwarf_vma for
ranges_offset.
(display_debug_ranges): Use dwarf_vma for ranges_offset, offset and
base_address.
* readelf.c (display_tag_value): Use an explicit signed type for
the tag parameter.
(display_gnu_attributes): Use an unsigned integer type for
attribute tags.
(display_power_gnu_attribute): Likewise.
(display_s390_gnu_attribute): Likewise.
(display_sparc_hwcaps): Likewise.
(display_sparc_hwcaps2): Likewise.
(display_sparc_gnu_attribute): Likewise.
(display_mips_gnu_attribute): Likewise.
(display_tic6x_attribute): Likewise.
(display_raw_attribute): Likewise.
(process_attributes): Likewise.
(process_arm_specific): Delete redundant function.
(process_power_specific): Likewise.
(process_s390_specific): Likewise.
(process_sparc_specific): Likewise.
(process_tic6x_specific): Likewise.
(process_msp430x_specific): Likewise.
(display_public_gnu_attributes): New function. Displays known
information about an unknown gnu attribute.
(display_generic_attribute): New function. Calls
display_tag_value for non-nul tags.
(process_arch_specific): Call process_attributes even for
architectures not known to specifically support gnu attributes.
Fix a commit 74e1a04b97 ("More fixes for reading corrupt ELF files.")
`readelf --version-info' output formatting regression where a dropped
new line caused section header information from the `.gnu.version_d'
version definition section to be printed on the same line as this
section's first entry.
For example with the `mips-linux' target we get:
$ cat ver_def.s
.data
.globl new_foo
.type new_foo, %object
new_foo:
.symver new_foo, foo@@ver_foo
$ cat ver_def.ver
{ global: *foo*; local: *; };
$ as -o ver_def.o ver_def.s
$ ld -e 0 --export-dynamic --version-script=ver_def.ver -o ver_def ver_def.o
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr) 000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
Add the new line then, to get:
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr)
000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
instead.
binutils/
* readelf.c (process_version_sections) <SHT_GNU_verdef>: Print a
new line between the heading and the first version definition
entry.
PR binutils/21156
* dwarf.c (cu_tu_indexes_read): Move into...
(load_cu_tu_indexes): ... here. Change the variable into
tri-state. Change the function into boolean, returning
false if the indicies could not be loaded.
(find_cu_tu_set): Return NULL if the indicies could not be
loaded.
The direct references in objcopy kind of look like a hack to me, so
I'm calling these symbols internal too. Certainly they aren't named
and documented as a public BFD symbol today anyway.
So ... give these bfd-internal symbols with external linkage a _bfd_
prefix to avoid collisions in the global symbol namespace.
While at it, give them names that more closely match the corresponding
option name that toggles them.
Also while at it, fix a few related comment typos.
gdb/ChangeLog:
2017-02-17 Pedro Alves <palves@redhat.com>
* srec.c (Chunk): Rename to ...
(_bfd_srec_len): ... this.
(S3Forced): Rename to ...
(_bfd_srec_forceS3): ... this.
* objcopy.c: Adjust all references.
PR binutils/21155
* readelf.c (IN_RANGE): New macro. Tests for an address + offset
being within a given range.
(target_specific_reloc_handling): Use macro to test for underflow
as well as overflow of reloc offset.
PR binutils/21139
* readelf.c (target_specific_reloc_handling): Add num_syms
parameter. Check for symbol table overflow before accessing
symbol value. If reloc pointer is NULL, discard all saved state.
(apply_relocations): Pass num_syms to target_specific_reloc_handling.
Call target_specific_reloc_handling with a NULL reloc pointer
after processing all of the relocs.
PR binutils/21137
* readelf.c (target_specific_reloc_handling): Add end parameter.
Check for buffer overflow before writing relocated values.
(apply_relocations): Pass end to target_specific_reloc_handling.
PR 20343
ld * ld.texinfo (Options): Extend documentation of the --plugin
option. Include a description of where the plugins should be
located.
binutils* doc/binutils.texi (ar): Extend documentation of the --plugin
option. Include a description of where the plugins should be
located.
(nm): Likewise.
When displaying the section headers table using objdump (-h), the column
containing the section header name is currently fixed at 13 characters.
A section name that is longer than 13 characters will overflow the
column causing the table to become miss-aligned.
In this commit I change the behaviour so that _in wide mode_ (-w -h) the
section name column is dynamically resized to fit the longest section
name we plan to display. In wide mode the column still retains a
minimum width of 13 characters.
In non-wide more the behaviour is completely unchanged.
While I was changing the dump_headers function I have unified the two
printf lines that handled the different address widths into a single
printf, the address width is now passed into printf using the '*' field
width format character.
binutils/ChangeLog:
* objdump.c (dump_section_header): Extract max section name length
from data parameter, use this when formatting output.
(find_longest_section_name): New function.
(dump_headers): Calculate longest section name when in wide mode,
reformat to unify printing of header line.
ld/ChangeLog:
* testsuite/ld-elf/eh-frame-hdr.d: Update expected results.
PR 21059
binutils* arlex.l: Support processing with flex 2.6.3.
* deflex.l: Likewise.
gas * config/bfin-lex.l: Support processing with flex 2.6.3.
* itbl-lex.l: Likewise.
binutils* resbin.c: Optional dialog control data immediately follow
the control description without alignment.
* testsuite/binutils-all/windres/controldata.rc: New test.
source.
* testsuite/binutils-all/windres/controldata.rsd: New test.
PR binutils/20876
bfd * opncls.c (find_separate_debug_file): Add include_dirs
parameter. Only include the directory part of the bfd's filename
in search paths if include_dirs is true. Add a couple of extra
locations for looking for debug files.
( bfd_follow_gnu_debuglink): Update invocation of
find_separate_debug_file.
(bfd_follow_gnu_debugaltlink): Likewise.
(get_build_id): New function: Finds the build-id of the given bfd.
(get_build_id_name): New function: Computes the name of the
separate debug info file for a bfd, based upon its build-id.
(check_build_id_file): New function: Checks to see if a separate
debug info file exists at the given location, and that its
build-id matches that of the original bfd.
(bfd_follow_build_id_debuglink): New function: Finds a separate
debug info file for a given bfd by using the build-id method.
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Try using the build-id
method of locating a separate debug info file before using the
debuglink method.
* bfd-in2.h: Regenerate.
binutils * NEWS: Mention the new feature.
* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
New proc to test the location of separate debug info files using
the build-id method.
bfd * dwarf2.c (lookup_address_in_function_table): Return early if
there are no functions in the given comp unit, or if the high
address of the last function in the comp unit is less than the
desired address.
binutils * objdump.c (display_file): Add new parameter 'last_file'. If
last_file is true, do not call bfd_close at the end of the
function.
(main): Set the value of the last_file parameter when calling
display_file.
Add ASMACRO instruction support as per the MIPS16e ASE architecture
specifications [1][2], completing MIPS16e instruction set support.
[1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65
[2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66
include/
* opcode/mips.h: Document `0', `1', `2', `3', `4' and `s'
operand codes.
opcodes/
* mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3',
`4' and `s' operand codes.
(mips16_opcodes): Add "asmacro" entry.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Update for
ASMACRO support.
gas/
* testsuite/gas/mips/mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-asmacro.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Identify non-extensible instructions in the MIPS16 opcode table and
disallow their use with the `.e' instruction size suffix in assembly and
do not interpret any EXTEND prefix present as a part of the instruction
in disassembly.
According to all versions of the MIPS16 ASE specifications the following
instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R,
I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA
and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e
ASE specifications it has been further clarified what was previously
implied, that non-extesiable instructions when preceded with an EXTEND
prefix must cause a Reserved Instruction exception [3][5].
Therefore in the presence of an EXTEND prefix none of these instructions
are supposed to be handled as extended instructions and supporting these
forms in disassembly causes confusion, and in the case of the RRR major
opcode it also clashes with the ASMACRO encoding.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39
[4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49
[5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41
[6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51
include/
* opcode/mips.h (INSN2_SHORT_ONLY): New macro.
gas/
* config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix
instruction size override for INSN2_SHORT_ONLY opcode table
entries.
* testsuite/gas/mips/mips16-extend-swap.d: Adjust output.
* testsuite/gas/mips/mips16-macro-e.l: Adjust error messages.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-insn-e.l: New stderr output.
* testsuite/gas/mips/mips16-insn-t.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-insn-e.s: New test source.
* testsuite/gas/mips/mips16-insn-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_insn_mips16): Disallow EXTEND prefix
matching for INSN2_SHORT_ONLY opcode table entries.
* mips16-opc.c (SH): New macro.
(mips16_opcodes): Set SH in `pinfo2' for non-extensible
instruction entries: "nop", "addu", "and", "break", "cmp",
"daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu",
"drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv",
"dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j",
"jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg",
"not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu",
"srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb",
"seh", "sew", "zeb", "zeh", "zew" and "extend".
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-insn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Limit MIPS16 instruction disassembly according to the ISA level and ASE
set selected, as with the regular MIPS and microMIPS instruction sets.
Retain the property of `objdump -m mips:16' disassembling all MIPS16
instructions however, regardless of any ISA level recorded in the binary
examined.
To validate the disassembler use the GAS test suite for its convenience
of running tests across multiple ISAs, even though placing the tests in
the binutils test suite would be more appropriate. Adjust the single
binutils test which depends on 64-bit instruction disassembly to have
the ISA level required actually recorded in the binary examined.
opcodes/
* mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than
ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry.
(print_insn_mips16): Check opcode entries for validity against
the ISA level and ASE set selected.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module'
rather than `.set' to set the ISA level.
gas/
* testsuite/gas/mips/mips16-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-sub.s: New test source.
* testsuite/gas/mips/mips16e-sub.s: New test source.
* testsuite/gas/mips/mips16e-64-sub.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to
how the microMIPS opcode table is handled, for both the `match' and
`mask' fields, removing special casing for JAL and JALX instructions and
their `a' and `i' operand codes throughout, while retaining automatic
processing of extendable opcodes in assembly and disassembly.
In assembly disallow size enforcement suffixes as appropriate: `.t' for
both 32-bit instructions and macros and `.e' for macros only, making
macro handling consistent with the microMIPS instruction set.
In disassembly fully decode EXTEND prefixes prepended to unsupported
instruction encodings (according to the ISA selection) rather than
dumping them as hexadecimal data along with the following instruction,
removing all special casing for the EXTEND prefix and making its
handling rely on its opcode table entry, except where it is considered a
part of an extendable instruction.
include/
* opcode/mips.h (mips_opcode_32bit_p): New inline function.
gas/
* config/tc-mips.c (micromips_insn_length): Use
`mips_opcode_32bit_p'.
(is_size_valid): Adjust description.
(is_size_valid_16): New function.
(validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16
operand decoding.
(validate_mips16_insn): Remove `a' and `i' operand code special
casing, use `mips_opcode_32bit_p' to determine instruction
width.
(append_insn): Adjust forced MIPS16 instruction size
determination.
(match_mips16_insn): Likewise. Don't shift the instruction's
opcode with the `a' and `i' operand codes. Use
`mips_opcode_32bit_p' in operand decoding.
(match_mips16_insns): Check for forced instruction size's
validity.
(mips16_ip): Don't force instruction size in the `noautoextend'
mode.
* testsuite/gas/mips/mips16-jal-e.d: New test.
* testsuite/gas/mips/mips16-jal-t.d: New test.
* testsuite/gas/mips/mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16-jal-t.l: New stderr output.
* testsuite/gas/mips/mips16-macro-e.l: New stderr output.
* testsuite/gas/mips/mips16-macro-t.l: New stderr output.
* testsuite/gas/mips/mips16-jal-e.s: New test source.
* testsuite/gas/mips/mips16-jal-t.s: New test source.
* testsuite/gas/mips/mips16-macro-e.s: New test source.
* testsuite/gas/mips/mips16-macro-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Always handle `extend' and
`insn' together, with `extend' as the high-order 16 bits.
(match_kind): New enum.
(print_insn_mips16): Rework for 32-bit instruction matching.
Do not dump EXTEND prefixes here.
* mips16-opc.c (mips16_opcodes): Move "extend" entry to the end.
Recode `match' and `mask' fields as 32-bit in absolute "jal" and
"jalx" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust
test for separate EXTEND prefix disassembly.
We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.
Respect any ASE flags recorded in ELF file structures for the purpose of
selecting instructions to be disassembled, preventing code from being
hex-dumped even though having been clearly indicated as valid at the
assembly time. Use date from the MIPS ABI flags structure if present,
and otherwise there may be an MDMX ASE flag set in the ELF file header.
For backwards compatibility only set extra flags and do not clear any,
preserving all previously set by the architecture selected to be
disassembled for.
include/
* elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct
typedef as `elf_internal_abiflags_v0'.
bfd/
* bfd-in.h (elf_internal_abiflags_v0): New struct declaration.
(bfd_mips_elf_get_abiflags): New prototype.
* elfxx-mips.c (bfd_mips_elf_get_abiflags): New function.
* bfd-in2.h: Regenerate.
opcodes/
* mips-dis.c (mips_convert_abiflags_ases): New function.
(set_default_mips_dis_options): Also infer ASE flags from ELF
file structures.
binutils/
* testsuite/binutils-all/mips/mips-ase-1.d: New test.
* testsuite/binutils-all/mips/mips-ase-2.d: New test.
* testsuite/binutils-all/mips/mips-ase-3.d: New test.
* testsuite/binutils-all/mips/mips-ase-1.s: New test source.
* testsuite/binutils-all/mips/mips-ase-2.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Use a tab rather than a space to separate `extend' and its uninterpreted
argument output, like with regular instructions. Separate hexadecimal
halves of undecoded extended instructions output with a space instead of
presenting them concatenated.
opcodes/
* mips-dis.c (print_insn_mips16): Use a tab rather than a space
to separate `extend' and its uninterpreted argument output.
Separate hexadecimal halves of undecoded extended instructions
output.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-noinsn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
Complement commit dd8b7c222e ("MIPS: mips16e jalrc/jrc opcodes"),
<https://sourceware.org/ml/binutils/2005-07/msg00349.html>, and stop the
disassembler making a delay-slot adjustment for PC-relative operations
following either MIPS16e compact jumps, or undefined RR/J(AL)R(C)
encodings that have the `l' (link) and `ra' (source register is `ra')
bits set both at a time. Adjust code description for accuracy. Add a
suitable test case.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Avoid delay-slot
adjustment for PC-relative operations following MIPS16e compact
jumps or undefined RR/J(AL)R(C) encodings.
binutils/
* testsuite/binutils-all/mips/mips16-pcrel.d: New test.
* testsuite/binutils-all/mips/mips16-pcrel.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
PR binutils/20930
* objcopy.c (mark_symbols_used_in_relocations): Check for a null
symbol pointer pointer before attempting to mark the symbol as
kept.
The attached patch fixes a problem where nm displays bogus information for
synthetic symbol sizes when --size-sort is used.
This happens because the synthetic symbols (dot symbols for ppc64) are
generated based on their non-dot symbols. The generation process doesn't copy
over the ELF-specific bits of the regular non-dot symbols.
When --size-sort is used, the code attempts to access the symbol size from
the ELF-specific bits and ends up reading gargabe, causing the size to be
displayed incorrectly.
With the patch, i can see dot and non-dot symbols having the same size with
--size-sort.
This doesn't fix the fact that we don't display size information for synthetic
symbols without --size-sort, which i may address in the future.
binutils/ChangeLog:
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
* nm.c (sort_symbols_by_size): Don't read symbol size if symbol
is synthetic.
This patch fixes:
- fpus and fpud are swaped.
- quarkse_em doesn't include FPX extensions.
- auto guessed opcode mechanism may ignore the option passed via -M<feature> option.
opcodes/
2016-11-29 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (is_compatible_p): Remove function.
(skip_this_opcode): Don't add any decoding class to decode list.
Remove warning.
(find_format_from_table): Go through all opcodes, and warn if we
use a guessed mnemonic.
binutils/
2016-11-29 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/binutils-all/arc/objdump.exp (Warning test): Update
test.
PR ld/20815
bfd * elf.c (elf_modify_segment_map): Allow empty LOAD segments if
they contain the program headers.
(_bfd_elf_map_sections_to_segments): If the linker created the
PHDR segment then always attempt to include it in a LOAD segment.
(assign_file_positions_for_non_load_sections): Allow LOAD segments
to overlap PHDR segments.
(phdr_sorter): New function. Sorts program headers.
(assign_file_positions_except_relocs): Sort the program headers
before writing them out. Issue an error if the PHDR segment is
not covered by a LOAD segment, unless the backend allows it.
* elf-bfd.h (struct elf_backend_data): Add
elf_backend_allow_non_load_phdr.
* elfxx-target.h (elf_backend_allow_non_load_phdr): Provide
default definition that returns FALSE.
(elfNN_bed): Initialise the elf_backend_allow_non_load_phdr
field.
* elf64-hppa.c (elf64_hppa_allow_non_load_phdr): New function.
Returns TRUE.
(elf_backend_allow_non_load_phdr): Define.
* elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Do not
place the interpreter string into the .interp section if the
nointerp flag is set in the link info structure.
* elf32-arc.c (elf_arc_size_dynamic_sections): Likewise.
* elf32-score7.c (score_elf_final_link_relocate): Allow for the
_gp symbol not being part of the output.
binutils* readelf.c (process_program_headers): Check PT_LOAD and PT_PHDR
segments for validity.
ld * ld.texinfo: Note that PT_TLS can be used as a segment type.
* testsuite/ld-discard/discard.ld: Add space for program headers.
* testsuite/ld-elf/flags1.ld: Likewise.
* testsuite/ld-elf/maxpage3.t: Likewise.
* testsuite/ld-elf/noload-1.t: Likewise.
* testsuite/ld-elf/orphan.ld: Likewise.
* testsuite/ld-elf/overlay.t: Likewise.
* testsuite/ld-elf/pr14052.t: Likewise.
* testsuite/ld-elf/pr19539.t: Likewise.
* testsuite/ld-elf/provide-hidden-1.ld: Likewise.
* testsuite/ld-elf/provide-hidden-s.ld: Likewise.
* testsuite/ld-elf/weak-dyn-1.ld: Likewise.
* testsuite/ld-i386/pr19539.t: Likewise.
* testsuite/ld-scripts/defined.t: Likewise.
* testsuite/ld-scripts/defined6.t: Likewise.
* testsuite/ld-scripts/dynamic-sections.t: Likewise.
* testsuite/ld-scripts/empty-aligned.t: Likewise.
* testsuite/ld-scripts/provide-2.t: Likewise.
* testsuite/ld-scripts/provide-4.t: Likewise.
* testsuite/ld-vax-elf/plt-local.ld: Likewise.
* testsuite/ld-x86-64/pr19539.t: Likewise.
* testsuite/ld-elf/ehdr_start-missing.d: Do not initialise the
dynamic linker.
* testsuite/ld-elf/ehdr_start-weak.d: Likewise.
* testsuite/ld-elf/elf.exp (pr14170, pr17068): Likewise.
* testsuite/ld-elf/loadaddr1.d: Update expected readelf output.
* testsuite/ld-elf/noload-2.d: Likewise.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-scripts/phdrs3a.d: Likewise.
* testsuite/ld-scripts/size-2.d: Likewise.
* testsuite/ld-elf/group.ld: Add program headers.
* testsuite/ld-elf/overlay.d: Skip for SPU.
* testsuite/ld-elf/flags1.d: Skip for RX.
* testsuite/ld-elf/pr19162.d: Skip for HPPA64.
* testsuite/ld-elf/pr19539.d: Skip for ALPHA.
* testsuite/ld-scripts/empty-orphan.t: Update program headers.
* testsuite/ld-scripts/size-2.t: Likewise.
PR binutils/20814
* dlltool.c (struct export): Remove hint field.
(make_one_lib_file): Store the ordinal value for IDATA6 not the
hint.
(gen_lib_file): Delete reference to hint field.
(mangle_defs): Delete computation of hint field.
PR binutils/20751
* nm.c (with_symbol_versions): New local variable.
(long_options): Add --with-symbol-versions.
(usage): Mention --with-symbol-versions.
(print_symbol): If with_symbol_versions is set then display the
version information associated with the symbol.
* NEWS: Mention the new feature.
* doc/binutils.texi (nm): Document the new option.
(objdump): Describe how symbol version information is displayed
for dynamic symbol dumps.
(readelf): Describe how symbol version information is displayed.
* testsuite/binutils-all/nm.exp: Add a test of the new feature.
I've been using dwarf-mode.el again recently and I found it mildly
annoying that the mode doesn't set default-directory. Setting it
means that operations in the dwarf-browsing buffer default to the
directory holding the object file being investigated.
This bumps the version number as well so that updating it via the
package manager works properly.
2016-11-04 Tom Tromey <tom@tromey.com>
* dwarf-mode.el (dwarf-browse): Set default-directory. Bump
version number.
* readelf.c (apply_relocations): Fail if the symbol table section
linked to by the reloc section does not have either the SHT_SYMTAB
or SHT_DYNSYM type.
(print_gnu_note): Decode the contents of NT_GNU_HWCAP notes.
Print the contents of unknown note types.
(process_note): Add the file and section to the parameter list.
Use print_symbol to display the note name.
Display the contents of unknown note types.
(process_corefile_note_segment): Rename to process_notes_at.
Add section parameter. Apply relocations to the notes when
loading from a section. Display section name when processing
notes in a section.
* testsuite/binutils-all/readelf.n: Update expected output.
As pointed out in PR binutils/19020, those tests were still failing when doing
remote testing. This is because the binary files weren't being copied over to
the remote host for testing.
FAIL: binutils-all/pr19020a
FAIL: binutils-all/pr19020b
This small patch fixes this up to make things pass.
binutils/ChangeLog:
2016-10-14 Luis Machado <lgustavo@codesourcery.com>
* testsuite/lib/utils-lib.exp (run_dump_test): Call remote_download
to copy file to remote host.
On S/390 we see quite often registers marked as "bad register" in the
readelf --debug-dump=frames or objdump -Wf output.
00000000 0000000000000014 00000000 CIE
Version: 1
Augmentation: "zR"
Code alignment factor: 1
Data alignment factor: -8
Return address column: 14
Augmentation data: 1b
DW_CFA_def_cfa: r15 ofs 160
DW_CFA_nop
DW_CFA_nop
DW_CFA_nop
...
00000050 000000000000001c 00000054 FDE cie=00000000 pc=0000000080000e58..0000000080000e84
DW_CFA_advance_loc: 6 to 0000000080000e5e
DW_CFA_offset: r14 at cfa-48
DW_CFA_offset: r15 at cfa-40
DW_CFA_advance_loc: 6 to 0000000080000e64
DW_CFA_def_cfa_offset: 320
DW_CFA_advance_loc: 18 to 0000000080000e76
DW_CFA_restore: bad register: r15 <------
DW_CFA_restore: r14
DW_CFA_def_cfa_offset: 160
This is triggered by this check in display_debug_frames (dwarf.c):
case DW_CFA_restore:
if (opa >= (unsigned int) cie->ncols
|| opa >= (unsigned int) fc->ncols)
reg_prefix = bad_reg;
cie->ncols is number of registers referenced in the CIE which is 15 due
to r14 being given as return address column. So for the CFA_restore of
r15 a "bad register" is being printed while the same rule on r14 is ok.
The reason for this check is to prevent wild memory accesses when
reading input with corrupted register values while accessing the
col_type/col_offset arrays. However in that case r15 is a perfectly
valid register. It just happens not to be mentioned in the CIE. Hence
restoring the CIE rule for r15 should end up with the default rule which
is DW_CFA_undefined.
This probably wasn't observed on other platforms because they either do
not use CFA_restore (x86-64) or do not issue CFA_restore on registers
with a higher number than the return address column.
binutils/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* dwarf.c (frame_display_row): Fix formatting of return address
register column.
(display_debug_frames): Ignore invalid indices into
cie->col_type/cie->col_offset arrays and default to
DW_CF_undefined instead.
This patch adds support for .cfi_val_offset GAS pseudo command which
maps to DW_CFA_val_offset and DW_CFA_val_offset_sf.
gas/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* doc/as.texinfo: Add docu for .cfi_val_offset.
* dw2gencfi.c (cfi_add_CFA_val_offset): New function.
(dot_cfi): Add case for DW_CFA_val_offset.
(output_cfi_insn): Likewise.
(cfi_pseudo_table): Add entry for cfi_val_offset.
* dw2gencfi.h: Add prototype for cfi_add_CFA_val_offset.
* testsuite/gas/cfi/cfi-common-8.d: New test.
* testsuite/gas/cfi/cfi-common-8.s: New test.
* testsuite/gas/cfi/cfi.exp: Run cfi-common-8 testcase.
binutils/ChangeLog:
2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* dwarf.c (display_debug_frames): Adjust output line.
This patch extends Tag_GNU_Power_ABI_FP to cover long double ABIs,
makes the assembler warn about undefined tag values, and removes
similar warnings from the linker. I think it is better to not
warn in the linker about undefined tag values as future extensions to
the tags then won't result in likely bogus warnings. This is
consistent with the fact that an older linker won't warn on an
entirely new tag.
include/
* elf/ppc.h (Tag_GNU_Power_ABI_FP): Comment.
bfd/
* elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Declare.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): New function.
(ppc_elf_merge_obj_attributes): Use it. Don't copy first file
attributes, merge them. Don't warn about undefined tag bits,
or copy unknown values to output.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Call
_bfd_elf_ppc_merge_fp_attributes.
binutils/
* readelf.c (display_power_gnu_attribute): Catch truncated section
for all powerpc attributes. Display long double ABI. Don't
capitalize words, except for names. Show known bits of tag values
when some unknown bits are present. Whitespace fixes.
gas/
* config/tc-ppc.c (ppc_elf_gnu_attribute): New function.
(md_pseudo_table <ELF>): Handle "gnu_attribute".
ld/
* testsuite/ld-powerpc/attr-gnu-4-4.s: Delete.
* testsuite/ld-powerpc/attr-gnu-4-14.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-24.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-34.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-41.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output.
* testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests.
get_coff_symbol_type had a potenial buffer overflow even with
untranslated messages.
* nm.c (get_elf_symbol_type): Don't use sprintf with translated
strings, use asprintf instead.
(get_coff_symbol_type): Likewise.
Symbol sorting means we can't assume that the last n symbols are
synthetic.
* nm.c (print_symbol): Remove is_synthetic param. Test sym->flags
instead.
(print_size_symbols, print_symbols): Adjust to suit, deleting
now unused synth_count param and fromsynth var.
(display_rel_file): Adjust, localizing synth_count.
Since the internal compression header size can be bigger than the
external compression header size, we should check the external
compression header size.
* readelf.c (load_specific_debug_section): Check the external
compression header size.
* readelf.c (process_symbol_table): Generate a warning if a local
symbol is found at and offste greater than or equal to the sh_info
field of it's section header.
PR binutils/20440
* dwarf.c (display_debug_lines_decoded): Add checks for running
off the end of the section when populating the directory table and
file table.
(frame_display_row): Set max_regs equal to ncols.
(load_specific_debug_section): If the section is compressed, but
it is not big enough to hold a compression header then warn and
return 0.
Jan Kratochvil
Nick Clifton
Maciej W. Rozycki
Pedro Alves
Dilyan Palauzov
Bernd Schmidt
Andrew Burgess
Bernhard Rosenkranzer
Dmitry Timoshkov
Alan Modra
Dimitar Dimitrov
Tristan Gingold
Andrew Waterman
Jiong Wang
Etienne Buira
Jose E. Marchesi
Luis Machado
Claudiu Zissulescu
Ambrogino Modigliani
Mark Wielaard
Rudy
Tom Tromey
Palmer Dabbelt
Andreas Krebbel
Vlad Zakharov
Ed Maste
H.J. Lu