This patch adds gdb support for the Program Priorty Register and the
Data Stream Control Register, for the powerpc linux native and core
file targets, and for the powerpc linux server stub.
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-tdesc.h (tdesc_powerpc_isa205_ppr_dscr_vsx32l)
(tdesc_powerpc_isa205_ppr_dscr_vsx64l): Declare.
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_PPRREGSET)
(PPC_LINUX_SIZEOF_DSCRREGSET): Define.
(struct ppc_linux_features) <ppr_dscr>: New field.
(ppc_linux_no_features): Add initializer for ppr_dscr field.
* arch/ppc-linux-common.c (ppc_linux_match_description): Return
new tdescs.
* nat/ppc-linux.h (PPC_FEATURE2_DSCR, NT_PPC_PPR, NT_PPC_DSCR):
Define if not already defined.
* features/Makefile (WHICH): Add
rs6000/powerpc-isa205-ppr-dscr-vsx32l and
rs6000/powerpc-isa205-ppr-dscr-vsx64l.
(XMLTOC): Add rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml and
rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml.
* features/rs6000/power-dscr.xml: New file.
* features/rs6000/power-ppr.xml: New file.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml: New file.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml: New file.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c: Generate.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c: Generate.
* regformats/rs6000/powerpc-isa205-ppr-dscr-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-ppr-dscr-vsx64l.dat: Generate.
* ppc-linux-nat.c: Include <sys/uio.h>.
(fetch_regset, store_regset, check_regset): New functions.
(fetch_register, fetch_ppc_registers): Call fetch_regset with
DSCR and PPR regsets.
(store_register, store_ppc_registers): Call store_regset with
DSCR and PPR regsets.
(ppc_linux_get_hwcap2): New function.
(ppc_linux_nat_target::read_description): Call
ppc_linux_get_hwcap2 and check_regset, set ppr_dscr field in the
features struct if needed.
* ppc-linux-tdep.c: Include
features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c and
features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c.
(ppc32_regmap_ppr, ppc32_regmap_dscr, ppc32_linux_pprregset)
(ppc32_linux_dscrregset): New globals.
(ppc_linux_iterate_over_regset_sections): Call back with the ppr
and dscr regsets.
(ppc_linux_core_read_description): Check if the ppr and dscr
sections are present and set ppr_dscr in the features struct.
(_initialize_ppc_linux_tdep): Call
initialize_tdesc_powerpc_isa205_ppr_dscr_vsx32l and
initialize_tdesc_powerpc_isa205_ppr_dscr_vsx64l.
* ppc-linux-tdep.h (ppc32_linux_pprregset)
(ppc32_linux_dscrregset): Declare.
* ppc-tdep.h (struct gdbarch_tdep) <ppc_ppr_regnum>: New field.
<ppc_dscr_regnum>: New field.
(enum) <PPC_PPR_REGNUM, PPC_DSCR_REGNUM>: New enum values.
* rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate ppr
and dscr features.
(ppc_process_record_op31): Record changes to PPR and DSCR.
gdb/gdbserver/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Add
powerpc-isa205-ppr-dscr-vsx32l-ipa.o and
powerpc-isa205-ppr-dscr-vsx64l-ipa.o.
(powerpc*-*-linux*): Add powerpc-isa205-ppr-dscr-vsx32l.o and
powerpc-isa205-ppr-dscr-vsx64l.o to srv_regobj, add
rs6000/power-dscr.xml, rs6000/power-ppr.xml,
rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml and
rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml to srv_xmlfiles.
* linux-ppc-tdesc-init.h (enum ppc_linux_tdesc)
<PPC_TDESC_ISA205_PPR_DSCR_VSX>: New enum value.
(init_registers_powerpc_isa205_ppr_dscr_vsx32l)
(init_registers_powerpc_isa205_ppr_dscr_vsx64l): Declare.
* linux-ppc-low.c: Include "elf/common.h" and <sys/uio.h>.
(ppc_hwcap): Add comment.
(ppc_hwcap2): New global.
(ppc_check_regset, ppc_fill_pprregset, ppc_store_pprregset)
(ppc_fill_dscrregset, ppc_store_dscrregset): New functions.
(ppc_regsets): Add entries for the DSCR and PPR regsets.
(ppc_arch_setup): Get AT_HWCAP2. Set ppr_dscr in features struct
when needed. Set sizes for the the DSCR and PPR regsets.
(ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA205_PPR_DSCR_VSX.
(initialize_low_arch): Call
init_registers_powerpc_isa205_ppr_dscr_vsx32l and
init_registers_powerpc_isa205_ppr_dscr_vsx64l.
* linux-ppc-ipa.c (get_ipa_tdesc): Handle
PPC_TDESC_ISA205_PPR_DSCR_VSX.
(initialize_low_tracepoint): Call
init_registers_powerpc_isa205_ppr_dscr_vsx32l and
init_registers_powerpc_isa205_ppr_dscr_vsx64l.
gdb/testsuite/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.arch/powerpc-ppr-dscr.c: New file.
* gdb.arch/powerpc-ppr-dscr.exp: New file.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new features
"org.gnu.gdb.power.ppr" and "org.gnu.gdb.power.dscr".
Now that linux-tdep.c already zero-initializes the buffer used for
generating core file notes, there is no need to do this in the linux
collect functions for the vector regset. The memsets in gdbserver were
not useful to begin with.
gdb/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* ppc-linux-tdep.c (ppc_linux_collect_vrregset): Remove.
(ppc32_le_linux_vrregset, ppc32_be_linux_vrregset): Replace
ppc_linux_collect_vrregset by regcache_collect_regset.
gdb/gdbserver/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* linux-ppc-low.c (ppc_fill_vrregset): Remove memset calls.
When invoking gdbserver, if the COMM parameter takes the form "unix::/path/name"
then a local (unix) domain socket will be created with that name and gdbserver
will listen for connections on that.
gdb/
* NEWS: Mention new feature.
gdb/gdbserver/
* configure.ac (AC_CHECK_HEADERS): Add sys/un.h.
* configure: Regenerate.
* remote-utils.c (remote_prepare): Create a local socket if requested.
(remote_open): Don't attempt to open a file if it's a socket.
(handle_accept_event): Display the name of the socket on connection.
gdb/common/
* netstuff.c (parse_connection_spec)[prefixes]: New member for local domain sockets.
This is a follow-up of:
https://sourceware.org/ml/gdb-patches/2018-08/msg00347.html
Instead of going throttle and always enabling our selftests (even in
non-development builds), this patch is a bit more conservative and
introduces a configure option ("--enable-unit-tests") that allows the
user to choose whether she wants unit tests in the build or not. Note
that the current behaviour is retained: if no option is provided, GDB
will have selftests included in a development build, and will *not*
have selftests included in a non-development build.
The rationale for having this option is still the same: due to the
many racy testcases and random failures we see when running the GDB
testsuite, it is unfortunately not possible to perform a full test
when one is building a downstream package. As the Fedora GDB
maintainer and one of the Debian GDB uploaders, I feel like this
situation could be improved by, at least, executing our selftests
after the package has been built.
This patch introduces no regressions to our build.
OK?
gdb/ChangeLog:
2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com>
Simon Marchi <simark@simark.ca>
* README (`configure' options): Add documentation for new
"--enable-unit-tests" option.
* acinclude.m4: Include "selftest.m4".
* configure: Regenerate.
* configure.ac: Use "GDB_AC_SELFTEST".
* maint.c (maintenance_selftest): Update message informing
that selftests have been disabled.
(maintenance_info_selftests): Likewise.
* selftest.m4: New file.
gdb/gdbserver/ChangeLog:
2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com>
Simon Marchi <simark@simark.ca>
* acinclude.m4: Include "../selftest.m4".
* configure: Regenerate.
* configure.ac: Use "GDB_AC_SELFTEST".
* configure.srv: Use "$enable_unittests" instead of
"$development" when checking whether unit tests have been
enabled.
* server.c (captured_main): Update message informing that
selftests have been disabled.
gdb/testsuite/ChangeLog:
2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.gdb/unittest.exp: Update expected message informing that
selftests have been disabled.
* gdb.server/unittest.exp: Likewise.
squash! Add parameter to allow enabling/disabling selftests via configure
This fixes a few instances of shadowing in gdbserver. These are all
simple fixes.
gdb/gdbserver/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* server.c (handle_status): Rename inner "thread".
(process_serial_event): Declare "res" in 'm' case.
* linux-low.c (last_thread_of_process_p, find_lwp_pid)
(iterate_over_lwps): Rename inner "thread".
(linux_qxfer_libraries_svr4): Rename inner "len".
* gdbthread.h (find_thread_in_random): Rename inner "thread".
This commit moves now-identical code from gdb/gdb_proc_service.h
and gdb/gdbserver/gdb_proc_service.h into the new shared file
gdb/common/gdb_proc_service.h.
gdb/ChangeLog:
* common/gdb_proc_service.h: New file, factored out from...
* gdb_proc_service.h: Moved common code to the above file.
* Makefile.in (HFILES_NO_SRCDIR): Add the above new file.
gdb/gdbserver/ChangeLog:
* gdb_proc_service.h: Moved common code to
common/gdb_proc_service.h.
This commit updates comments and whitespace in GDB's and gdbserver's
gdb_proc_service.h.
gdb/ChangeLog:
* gdb_proc_service.h: Whitespace change.
gdb/gdbserver/ChangeLog:
* gdb_proc_service.h: Synchronize comments and whitespace with
GDB's version of this file.
gdbserver's configure removes -Wmissing-prototypes from the warning
flags. However, this flag is only useful for C, so this deletion is
no longer needed.
gdb/gdbserver/ChangeLog
2018-09-25 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac (WARN_CFLAGS): Don't remove -Wmissing-prototypes.
Tom mentioned this a while ago, as a way to give you a cheap sense of
progression in your build, as all object files will be built
alphabetically (including the directory part). I tried it and I think
it's nice.
gdb/ChangeLog:
* Makefile.in (LIBGDB_OBS): Sort COMMON_OBS.
gdb/gdbserver/ChangeLog:
* Makefile.in (gdbserver$(EXEEXT)): Sort OBS.
(gdbreplay$(EXEEXT)): Sort GDBREPLAY_OBS.
($(IPA_LIB)): Sort IPA_OBJS.
ADD_DEPS is defined nowhere, so I presume it's not useful. If I'm wrong
and this is actually used, there should be a comment explaining where it
comes from.
gdb/gdbserver/ChangeLog:
* Makefile.in: Remove references to $(ADD_DEPS).
This changes a couple of places in gdbserver to use the GNU style for
metasyntactic variables.
gdb/gdbserver/ChangeLog
2018-09-16 Tom Tromey <tom@tromey.com>
* remote-utils.c (remote_open): Use GNU style for metasyntactic
variables.
* gdbreplay.c (gdbreplay_usage): Use GNU style for metasyntactic
variables.
After looking into why the build failed for Simon but not for me, we
found that the underlying cause was due to how gcc treats
-Wformat-nonliteral. gcc requires -Wformat to be given first; but
warning.m4 was not doing this, so -Wformat-nonliteral was not being
used.
This patch changes warning.m4 to account gcc's requirement.
This then showed that the target-float.c build change in the earlier
Makefile patch was also incorrect. Simon didn't see this in his
build, but gcc now points it out. So, this patch fixes this problem
as well.
2018-09-05 Tom Tromey <tom@tromey.com>
* warning.m4 (AM_GDB_WARNINGS): Add -Wformat when testing
-Wformat-nonliteral.
* target-float.c (host_float_ops<T>::to_string)
(host_float_ops<T>::from_string): Use
DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL.
* configure: Rebuild.
gdb/gdbserver/ChangeLog
2018-09-05 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
The PR reports that building with -Wodr -flto complains about different
versions of struct ipa_sym_addresses, in common/agent.c and
gdbserver/tracepoint.c. This patch renames the version in common to
ipa_sym_addresses_common to avoid the name clash. Because the IPA_SYM
assumed the name ipa_sym_addresses, it now requires the includer to
define the IPA_SYM_STRUCT_NAME macro to define the name of the structure
holding the IPA symbol addresses.
gdb/ChangeLog:
PR build/23399
* common/agent.c (IPA_SYM_STRUCT_NAME): Define.
(struct ipa_sym_addresses): Rename to...
(struct ipa_sym_addresses_common): ... this.
* common/agent.h (IPA_SYM): Use IPA_SYM_STRUCT_NAME.
gdb/gdbserver/ChangeLog:
PR build/23399
* tracepoint.c (IPA_SYM_STRUCT_NAME): Define.
Commit
c12a508 ("Add client_state struct.")
inadvertently changed the default behavior of GDBserver wrt address
randomization. The old disable_randomization global variable was
initialized to 1, whereas the corresponding field in the client_state
structure is initialized to 0.
This fixes
make check TESTS="gdb.base/jit-simple.exp" RUNTESTFLAGS="--target_board=native-gdbserver"
make check TESTS="gdb.base/execl-update-breakpoints.exp" RUNTESTFLAGS="--target_board=native-gdbserver"
Note that the execl-update-breakpoints.exp would only fail on systems
where the toolchain emits position-independent executables by default
(otherwise the main executable position is never randomized, so the
value of disable_randomization didn't matter).
gdb/gdbserver/ChangeLog:
PR gdb/23374
PR gdb/23375
* server.h (struct client_state) <disable_randomization>:
Initialize to 1.
This adds -Wunused-variable to the build. This required a special
check in configure in order to work around a bug in GCC 4.9. Simon
ound the correct test to use, so I've added him to the ChangeLog.
gdb/ChangeLog
2018-07-22 Simon Marchi <simon.marchi@polymtl.ca>
Tom Tromey <tom@tromey.com>
* warning.m4 (AM_GDB_WARNINGS): Add -Wunused-variable and special
test for it.
* configure: Rebuild.
gdb/gdbserver/ChangeLog
2018-07-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
This removes a few unused variables from gdbserver.
The x86-tdesc.h change is a bit unusual for this series. This file
was not defining the multiple-include guard symbol, so I've added that
here. Also, it is hard to determine when i386_expedite_regs will be
needed, so this patch simply marks it ATTRIBUTE_UNUSED.
gdb/gdbserver/ChangeLog
2018-07-22 Tom Tromey <tom@tromey.com>
* win32-low.c (win32_create_inferior): Remove unused variables.
* gdbreplay.c (remote_open): Remove unused variable.
* remote-utils.c (remote_prepare): Remove unused variable.
* x86-tdesc.h (X86_TDESC_H): Define.
(amd64_expedite_regs): Define conditionally.
(i386_expedite_regs): Mark ATTRIBUTE_UNUSED.
* linux-x86-tdesc.c (i386_tdescs): Move inside #if.
* remote-utils.c (readchar): Remove unused variable.
We start from a process_info pointer, pass down process->pid, and
then the target_kill implementations need to find the process from the
pid again. Pass the process_info pointer down directly instead.
gdb/gdbserver/ChangeLog:
2018-07-13 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_kill): Change parameter to process_info
pointer instead of pid. Adjust.
* lynx-low.c (lynx_kill): Likewise.
* nto-low.c (nto_kill): Likewise.
* spu-low.c (spu_kill): Likewise.
* win32-low.c (win32_kill): Likewise.
* server.c (handle_v_kill, kill_inferior_callback)
(detach_or_kill_for_exit): Adjust.
* target.c (kill_inferior): Change parameter to process_info
pointer instead of pid. Adjust.
* target.h (struct target_ops) <kill>: Change parameter to
process_info pointer instead of pid. Adjust all implementations
and callers.
(kill_inferior): Likewise.
We start from a process_info pointer, pass down process->pid, and then
the target_detach and target_join implementations need to find the
process from the pid again. Pass the process_info pointer down
directly instead.
gdb/gdbserver/ChangeLog:
2018-07-13 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_detach, linux_join): Change parameter to
process_info pointer instead of pid. Adjust.
* lynx-low.c (lynx_detach, lynx_join): Likewise.
* nto-low.c (nto_detach): Likewise.
* spu-low.c (spu_detach, spu_join): Likewise.
* win32-low.c (win32_detach, win32_join): Likewise.
* server.c (handle_detach, detach_or_kill_for_exit): Adjust.
* target.h (struct target_ops) <detach, join>: Change parameter to
process_info pointer instead of pid. Adjust all implementations
and callers.
(detach_inferior, join_inferior): Rename 'pid' parameter to
'proc'.
This patch implements IPv6 support for both GDB and gdbserver. Based
on my research, it is the fourth attempt to do that since 2006. Since
I used ideas from all of the previous patches, I also added their
authors's names on the ChangeLogs as a way to recognize their
efforts. For reference sake, you can find the previous attempts at:
https://sourceware.org/ml/gdb-patches/2006-09/msg00192.htmlhttps://sourceware.org/ml/gdb-patches/2014-02/msg00248.htmlhttps://sourceware.org/ml/gdb-patches/2016-02/msg00226.html
The basic idea behind the patch is to start using the new
'getaddrinfo'/'getnameinfo' calls, which are responsible for
translating names and addresses in a protocol-independent way. This
means that if we ever have a new version of the IP protocol, we won't
need to change the code again (or, at least, won't have to change the
majority of the code).
The function 'getaddrinfo' returns a linked list of possible addresses
to connect to. Dealing with multiple addresses proved to be a hard
task with the current TCP auto-retry mechanism implemented on
ser-tcp:net_open. For example, when gdbserver listened only on an
IPv4 socket:
$ ./gdbserver --once 127.0.0.1:1234 ./a.out
and GDB was instructed to try to connect to both IPv6 and IPv4
sockets:
$ ./gdb -ex 'target extended-remote localhost:1234' ./a.out
the user would notice a somewhat big delay before GDB was able to
connect to the IPv4 socket. This happened because GDB was trying to
connect to the IPv6 socket first, and had to wait until the connection
timed out before it tried to connect to the IPv4 socket.
For that reason, I had to rewrite the main loop and implement a new
method for handling multiple connections. After some discussion,
Pedro and I agreed on the following algorithm:
1) For each entry returned by 'getaddrinfo', we try to open a socket
and connect to it.
2.a) If we have a successful 'connect', we just use that connection.
2.b) If we don't have a successfull 'connect', but if we've got a
ECONNREFUSED (meaning the the connection was refused), we keep track
of this fact by using a flag.
2.c) If we don't have a successfull 'connect', but if we've got a
EINPROGRESS (meaning that the connection is in progress), we perform
a 'select' call on the socket until we have a result (either a
successful connection, or an error on the socket).
3) If tcp_auto_retry is true, and we haven't gotten a successful
connection, and at least one of our attempts failed with
ECONNREFUSED, then we wait a little bit (i.e., call
'wait_for_connect'), check to see if there was a
timeout/interruption (in which case we bail out), and then go back
to (1).
After multiple tests, I was able to connect without delay on the
scenario described above, and was also able to connect in all other
types of scenarios.
I also implemented some hostname parsing functions (along with their
corresponding unit tests) which are used to help GDB and gdbserver to
parse hostname strings provided by the user. These new functions are
living inside common/netstuff.[ch]. I've had to do that since IPv6
introduces a new URL scheme, which defines that square brackets can be
used to enclose the host part and differentiate it from the
port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some
time thinking about a reasonable way to interpret what the user wants,
and I came up with the following:
- If the user has provided a prefix that doesn't specify the protocol
version (i.e., "tcp:" or "udp:"), or if the user has not provided
any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when
dealing with 'getaddrinfo') *unless* the host starts with "[" (in
which case, assume it's an IPv6 host).
- If the user has provided a prefix that does specify the protocol
version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect
that.
This method doesn't follow strictly what RFC 2732 proposes (that
literal IPv6 addresses should be provided enclosed in "[" and "]")
because IPv6 addresses still can be provided without square brackets
in our case, but since we have prefixes to specify protocol versions I
think this is not an issue.
Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST'
testcase parameter, which makes it possible to specify the
hostname (without the port) to be used when testing GDB and
gdbserver. For example, to run IPv6 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]'
Or, to run IPv4 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1'
This required a few changes on the gdbserver-base.exp, and also a
minimal adjustment on gdb.server/run-without-local-binary.exp.
Finally, I've implemented a new testcase,
gdb.server/server-connect.exp, which is supposed to run on the native
host and perform various "smoke tests" using different connection
methods.
This patch has been regression-tested on BuildBot and locally, and
also built using a x86_64-w64-mingw32 GCC, and no problems were found.
gdb/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
'unittests/parse-connection-spec-selftests.c'.
(COMMON_SFILES): Add 'common/netstuff.c'.
(HFILES_NO_SRCDIR): Add 'common/netstuff.h'.
* NEWS (Changes since GDB 8.2): Mention IPv6 support.
* common/netstuff.c: New file.
* common/netstuff.h: New file.
* ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'.
(wait_for_connect): Update comment. New parameter
'gdb::optional<int> sock' instead of 'struct serial *scb'.
Use 'sock' directly instead of 'scb->fd'.
(try_connect): New function, with code from 'net_open'.
(net_open): Rewrite main loop to deal with multiple
sockets/addresses. Handle IPv6-style hostnames; implement
support for IPv6 connections.
* unittests/parse-connection-spec-selftests.c: New file.
gdb/gdbserver/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'.
(OBS): Add 'common/netstuff.o'.
(GDBREPLAY_OBS): Likewise.
* gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'.
(remote_open): Implement support for IPv6
connections.
* remote-utils.c: Include 'netstuff.h', 'filestuff.h'
and 'wspiapi.h'.
(handle_accept_event): Accept connections from IPv6 sources.
(remote_prepare): Handle IPv6-style hostnames; implement
support for IPv6 connections.
(remote_open): Implement support for printing connections from
IPv6 sources.
gdb/testsuite/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST'
parameter.
* boards/native-extended-gdbserver.exp: Do not set 'sockethost'
by default.
* boards/native-gdbserver.exp: Likewise.
* gdb.server/run-without-local-binary.exp: Improve regexp used
for detecting when a remote debugging connection succeeds.
* gdb.server/server-connect.exp: New file.
* lib/gdbserver-support.exp (gdbserver_default_get_comm_port):
Do not prefix the port number with ":".
(gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement
support for detecting and using it. Add '$debughost_gdbserver'
to the list of arguments used to start gdbserver. Handle case
when gdbserver cannot resolve a network name.
gdb/doc/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* gdb.texinfo (Remote Connection Commands): Add explanation
about new IPv6 support. Add new connection prefixes.
This fixes a gdb.base/multi-forks.exp regression with GDBserver.
Git commit f2ffa92bbc ("gdb: Eliminate the 'stop_pc' global") caused
the regression by exposing a latent bug in gdbserver.
The bug is that GDBserver's implementation of the D;PID packet
incorrectly assumes that the selected thread points to the process
being detached. This happens via the any_persistent_commands call,
which calls current_process:
(gdb) bt
#0 0x000000000040a57e in internal_error(char const*, int, char const*, ...)
(file=0x4a53c0 "src/gdb/gdbserver/inferiors.c", line=212, fmt=0x4a539e "%s:
Assertion `%s' failed.") at src/gdb/gdbserver/../common/errors.c:54
#1 0x0000000000420acf in current_process() () at
src/gdb/gdbserver/inferiors.c:212
#2 0x00000000004226a0 in any_persistent_commands() () at
gdb/gdbserver/mem-break.c:308
#3 0x000000000042cb43 in handle_detach(char*) (own_buf=0x6f0280 "D;62ea") at
src/gdb/gdbserver/server.c:1210
#4 0x0000000000433af3 in process_serial_event() () at
src/gdb/gdbserver/server.c:4055
#5 0x0000000000434878 in handle_serial_event(int, void*) (err=0,
client_data=0x0)
The "eliminate stop_pc" commit exposes the problem because before that
commit, GDB's switch_to_thread always read the newly-selected thread's
PC, and that would end up forcing GDBserver's selected thread to
change accordingly as side effect. After that commit, GDB no longer
reads the thread's PC, and GDBserver does not switch the thread.
Fix this by removing the assumption from GDBserver.
gdb/gdbserver/ChangeLog:
2018-07-11 Pedro Alves <palves@redhat.com>
PR gdb/23377
* mem-break.c (any_persistent_commands): Add process_info
parameter and use it instead of relying on the current process.
Change return type to bool.
* mem-break.h (any_persistent_commands): Add process_info
parameter and change return type to bool.
* server.c (handle_detach): Remove require_running_or_return call.
Look up the process_info for the process we're about to detach.
If not found, return back error to GDB. Adjust
any_persistent_commands call to pass down a process pointer.
Running gdbserver under Valgrind I get:
==26925== Conditional jump or move depends on uninitialised value(s)
==26925== at 0x473E7F: i387_cache_to_xsave(regcache*, void*) (i387-fp.c:579)
==26925== by 0x46E3ED: x86_fill_xstateregset(regcache*, void*) (linux-x86-low.c:418)
==26925== by 0x45E747: regsets_store_inferior_registers(regsets_info*, regcache*) (linux-low.c:5456)
==26925== by 0x45EEF8: linux_store_registers(regcache*, int) (linux-low.c:5731)
==26925== by 0x426441: regcache_invalidate_thread(thread_info*) (regcache.c:89)
==26925== by 0x45CCAF: linux_resume_one_lwp_throw(lwp_info*, int, int, siginfo_t*) (linux-low.c:4447)
==26925== by 0x45CE2A: linux_resume_one_lwp(lwp_info*, int, int, siginfo_t*) (linux-low.c:4519)
==26925== by 0x45E17C: proceed_one_lwp(thread_info*, lwp_info*) (linux-low.c:5216)
==26925== by 0x45DC81: linux_resume_one_thread(thread_info*, bool) (linux-low.c:5031)
==26925== by 0x45DD34: linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}::operator()(thread_info*) const (linux-low.c:5095)
==26925== by 0x462907: void for_each_thread<linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}>(linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}) (gdbthread.h:150)
==26925== by 0x45DE62: linux_resume(thread_resume*, unsigned long) (linux-low.c:5093)
==26925==
==26925== Conditional jump or move depends on uninitialised value(s)
==26925== at 0x473EBD: i387_cache_to_xsave(regcache*, void*) (i387-fp.c:586)
==26925== by 0x46E3ED: x86_fill_xstateregset(regcache*, void*) (linux-x86-low.c:418)
==26925== by 0x45E747: regsets_store_inferior_registers(regsets_info*, regcache*) (linux-low.c:5456)
==26925== by 0x45EEF8: linux_store_registers(regcache*, int) (linux-low.c:5731)
==26925== by 0x426441: regcache_invalidate_thread(thread_info*) (regcache.c:89)
==26925== by 0x45CCAF: linux_resume_one_lwp_throw(lwp_info*, int, int, siginfo_t*) (linux-low.c:4447)
==26925== by 0x45CE2A: linux_resume_one_lwp(lwp_info*, int, int, siginfo_t*) (linux-low.c:4519)
==26925== by 0x45E17C: proceed_one_lwp(thread_info*, lwp_info*) (linux-low.c:5216)
==26925== by 0x45DC81: linux_resume_one_thread(thread_info*, bool) (linux-low.c:5031)
==26925== by 0x45DD34: linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}::operator()(thread_info*) const (linux-low.c:5095)
==26925== by 0x462907: void for_each_thread<linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}>(linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}) (gdbthread.h:150)
==26925== by 0x45DE62: linux_resume(thread_resume*, unsigned long) (linux-low.c:5093)
The problem is a type/width mismatch in code like this, in
gdbserver/i387-fp.c:
/* Some registers are 16-bit. */
collect_register_by_name (regcache, "fctrl", &val);
fp->fctrl = val;
In the above code:
#1 - 'val' is a 64-bit unsigned long.
#2 - "fctrl" is 32-bit in the register cache, thus half of 'val' is
left uninitialized by collect_register_by_name, which works with
an untyped raw buffer output (i.e., void*).
#3 - fp->fctrl is an unsigned short (16-bit). For some such
registers we're masking off the uninitialized bits with 0xffff,
but not in all cases.
We end up in such a fragile situation because
collect_registers_by_name works with an untyped output buffer pointer,
making it easy to pass a pointer to a variable of the wrong size.
Fix this by using regcache_raw_get_unsigned instead (actually a new
regcache_raw_get_unsigned_by_name wrapper), which always returns a
zero-extended ULONGEST register value. It ends up simplifying the
i387-tdep.c code a bit, even.
gdb/gdbserver/ChangeLog:
2018-07-11 Pedro Alves <palves@redhat.com>
* i387-fp.c (i387_cache_to_fsave, cache_to_fxsave)
(i387_cache_to_xsave): Use regcache_raw_get_unsigned_by_name
instead of collect_register_by_name.
* regcache.c (regcache_raw_get_unsigned_by_name): New.
* regcache.h (regcache_raw_get_unsigned_by_name): New.
There's a buildroot where I want to debug a binary, and I tried to
connect to it from outside, but got very weird errors like
architecture mismatch or protocol errors. At last, after switching on
'--debug' for gdbserver I found a message 'Can't open /proc/pid/'
message and suddenly found that I forgot to mount procfs in my
buildroot.
Make discovering the problem easier by making GDB / GDBserver warn
(even without --debug) if /proc can not be accessed.
Native debugging:
(gdb) start
Temporary breakpoint 1 at 0x400835: file test.c, line 10.
Starting program: /tmp/test
warning: /proc is not accessible.
GDBserver/remote debugging:
$ ./gdbserver :9999 ./gdbserver
gdbserver: /proc is not accessible.
gdb/ChangeLog:
2018-07-04 Vyacheslav Barinov <v.barinov@samsung.com>
Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_init_ptrace): Rename to ...
(linux_init_ptrace_procfs): ... this. Call
linux_proc_init_warnings.
(linux_nat_target::post_attach)
(linux_nat_target::post_startup_inferior): Adjust.
* nat/linux-procfs.c (linux_proc_init_warnings): Define function.
* nat/linux-procfs.h (linux_proc_init_warnings): Declare function.
gdb/gdbserver/ChangeLog:
2018-07-04 Vyacheslav Barinov <v.barinov@samsung.com>
Pedro Alves <palves@redhat.com>
* linux-low.c (initialize_low): Call linux_proc_init_warnings.
While building gdbserver on GNU/Linux, the build failed with:
../../../binutils-gdb/gdb/gdbserver/linux-x86-tdesc.c: In function ‘const target_desc* amd64_linux_read_description(uint64_t, bool)’:
../../../binutils-gdb/gdb/gdbserver/linux-x86-tdesc.c:121:67: error: too few arguments to function ‘target_desc* amd64_create_target_description(uint64_t, bool, bool, bool)’
*tdesc = amd64_create_target_description (xcr0, is_x32, true);
^
In file included from ../../../binutils-gdb/gdb/gdbserver/linux-x86-tdesc.c:26:0:
../../../binutils-gdb/gdb/gdbserver/../arch/amd64.h:21:14: note: declared here
target_desc *amd64_create_target_description (uint64_t xcr0, bool is_x32,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
According to Joel Brobecker:
> I think the parameter should be set to "true". Otherwise, it will
> not include the fs_base and gs_base register in the list of registers.
> Although the name of the source file says x86, the code itself is
> protected by...
>
> #ifdef __x86_64__
>
> ... and is inside a function called amd64_linux_read_description.
> I also verified that this file gets compiled on amd64-linux platforms.
> See gdb/gdbserver/configure.srv:
>
> x86_64-*-linux*) srv_regobj="$srv_amd64_linux_regobj $srv_i386_linux_regobj"
>
> The last piece of confirmation is that setting the parameter to "true"
> provides the behavior before the parameter was added; and the reason
> for adding the parameter was to remove the {fs,gs}_base registers
> from the list for Windows only.
Therefore I'm pushing the patch to unbreak the build.
gdb/gdbserver/ChangeLog:
2018-06-29 Joel Brobecker <brobecker@adacore.com>
* linux-x86-tdesc.c (amd64_linux_read_description): Add missing
parameter in call to 'amd64_create_target_description'.
GDB is currently crashing anytime we try to access the fs_base/gs_base
registers, either to read them, or to write them. This can be observed
under various scenarios:
- Explicit reference to those registers (eg: print $fs_base) --
probably relatively rare;
- Calling a function in the inferior, with the crash happening
because we are trying to read those registers in order to save
their value ahead of making the function call;
- Just a plain "info registers";
The crash was introduced by the following commit:
| commit 48aeef91c2
| Date: Mon Jun 26 18:14:43 2017 -0700
| Subject: Include the fs_base and gs_base registers in amd64 target descriptions.
The Windows-nat implementation was unfortunately not prepared to deal
with those new registers. In particular, the way it fetches registers
is done by using a table where the index is the register number, and
the value at that index is the offset in the area in the thread's CONTEXT
data where the corresponding register value is stored.
For instance, in amd64-windows-nat.c, we can find the mappings static
array containing the following 57 elements in it:
#define context_offset(x) (offsetof (CONTEXT, x))
static const int mappings[] =
{
context_offset (Rax),
[...]
context_offset (FloatSave.MxCsr)
};
That array is then used by windows_fetch_one_register via:
char *context_offset = ((char *) &th->context) + mappings[r];
The problem is that fs_base's register number is 172, which is
well past the end of the mappings array (57 elements in total).
We end up getting an undefined offset, which happens to be so large
that it then causes the address where we try to read the register
value (a little bit later) to be invalid, thus crashing GDB with
a SEGV.
This patch side-steps the issue entirely by removing support for
those registers in GDB on x86_64-windows, because a look at the
CONTEXT structure indicates no support for getting those registers.
A more comprehensive fix would patch the potential buffer overflow
of the mappings array, but this can be done as a separate commit.
gdb/ChangeLog:
* gdb/amd64-tdep.h (amd64_create_target_description): Add
"segments" parameter.
* gdb/amd64-tdep.c (amd64_none_init_abi, amd64_x32_none_init_abi)
(_initialize_amd64_tdep): Update call to
amd64_create_target_description.
(amd64_target_description): Add "segments" parameter. Adjust
the implementation to use it.
* gdb/amd64-linux-tdep.c (amd64_linux_read_description): Update
call to amd64_create_target_description.
* gdb/amd64-windows-tdep.c (amd64_windows_init_abi): Likewise.
* gdb/arch/amd64.h (amd64_create_target_description): Add
"segments" register.
* gdb/arch/amd64.c (amd64_create_target_description): Add
"segments" parameter. Call create_feature_i386_64bit_segments
only if SEGMENTS is true.
* gdb/gdbserver/win32-i386-low.c (i386_arch_setup): Update
call to amd64_create_target_description.
Tested on x86_64-windows using AdaCore's testsuite (by Joel Brobecker
<brobecker at adacore dot com>).
Fedora rpmbuild has been complaining:
*** WARNING: ./usr/src/debug/gdb-8.1.50.20180618-24.fc28.x86_64/gdb/gdbserver/x86-tdesc.h is executable but has empty or no shebang, removing executable bit
gdb/gdbserver/ChangeLog
2018-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
* x86-tdesc.h: Remove executable permission flag.
gdb/testsuite/ChangeLog
2018-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
* lib/compiler.c: Remove executable permission flag.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
The variable has been removed in c12a508 ("Add client_state struct."),
remove the leftover declaration.
gdb/gdbserver/ChangeLog:
* tracepoint.h (current_traceframe): Remove declaration.
Add checks to detect SVE tdesc. Easiest way to do this is by checking the
size of the vector registers.
Use the common aarch64 ptrace copy functions for reading/writing registers.
A wrapper is required due to the common functions using reg_buffer_common.
gdbserver/
* linux-aarch64-low.c (is_sve_tdesc): New function.
(aarch64_sve_regs_copy_to_regcache): Likewise.
(aarch64_sve_regs_copy_from_regcache): Likewise.
(aarch64_regs_info): Add SVE checks.
(initialize_low_arch): Initialize SVE.
Add support for reading and writing registers for Aarch64 SVE.
We need to support the cases where the kernel only gives us a
fpsimd structure. This occurs when there is no active SVE state
in the kernel (for example, after starting a new process).
Added checks to make sure the vector length has not changed whilst
the process is running.
gdb/
* aarch64-linux-nat.c (fetch_sveregs_from_thread): New function.
(store_sveregs_to_thread): Likewise.
(aarch64_linux_fetch_inferior_registers): Check for SVE.
(aarch64_linux_store_inferior_registers): Likewise.
* nat/aarch64-sve-linux-ptrace.c (aarch64_sve_get_sveregs): New
function.
(aarch64_sve_regs_copy_to_regcache): Likewise.
(aarch64_sve_regs_copy_from_regcache): Likewise.
* nat/aarch64-sve-linux-ptrace.h (aarch64_sve_get_sveregs): New
declaration.
(aarch64_sve_regs_copy_to_regcache): Likewise.
(aarch64_sve_regs_copy_from_regcache): Likewise.
(sve_context): Structure from Linux headers.
(SVE_SIG_ZREGS_SIZE): Define from Linux headers.
(SVE_SIG_ZREG_SIZE): Likewise.
(SVE_SIG_PREG_SIZE): Likewise.
(SVE_SIG_FFR_SIZE): Likewise.
(SVE_SIG_REGS_OFFSET): Likewise.
(SVE_SIG_ZREGS_OFFSET): Likewise.
(SVE_SIG_ZREG_OFFSET): Likewise.
(SVE_SIG_ZREGS_SIZE): Likewise.
(SVE_SIG_PREGS_OFFSET): Likewise.
(SVE_SIG_PREG_OFFSET): Likewise.
(SVE_SIG_PREGS_SIZE): Likewise.
(SVE_SIG_FFR_OFFSET): Likewise.
(SVE_SIG_REGS_SIZE): Likewise.
(SVE_SIG_CONTEXT_SIZE): Likewise.
(SVE_PT_REGS_MASK): Likewise.
(SVE_PT_REGS_FPSIMD): Likewise.
(SVE_PT_REGS_SVE): Likewise.
(SVE_PT_VL_INHERIT): Likewise.
(SVE_PT_VL_ONEXEC): Likewise.
(SVE_PT_REGS_OFFSET): Likewise.
(SVE_PT_FPSIMD_OFFSET): Likewise.
(SVE_PT_FPSIMD_SIZE): Likewise.
(SVE_PT_SVE_ZREG_SIZE): Likewise.
(SVE_PT_SVE_PREG_SIZE): Likewise.
(SVE_PT_SVE_FFR_SIZE): Likewise.
(SVE_PT_SVE_FPSR_SIZE): Likewise.
(SVE_PT_SVE_FPCR_SIZE): Likewise.
(__SVE_SIG_TO_PT): Likewise.
(SVE_PT_SVE_OFFSET): Likewise.
(SVE_PT_SVE_ZREGS_OFFSET): Likewise.
(SVE_PT_SVE_ZREG_OFFSET): Likewise.
(SVE_PT_SVE_ZREGS_SIZE): Likewise.
(SVE_PT_SVE_PREGS_OFFSET): Likewise.
(SVE_PT_SVE_PREG_OFFSET): Likewise.
(SVE_PT_SVE_PREGS_SIZE): Likewise.
(SVE_PT_SVE_FFR_OFFSET): Likewise.
(SVE_PT_SVE_FPSR_OFFSET): Likewise.
(SVE_PT_SVE_FPCR_OFFSET): Likewise.
(SVE_PT_SVE_SIZE): Likewise.
(SVE_PT_SIZE): Likewise.
(HAS_SVE_STATE): New define.
gdbserver/
* Makefile.in: Add aarch64-sve-linux-ptrace.c.
A purely virtual class containing functions from gdb/regcache.h
Both the gdb regcache structures and gdbserver regcache inherit
directly from reg_buffer_common. This will allow for common
functions which require the use of a regcache.
gdb/
* common/common-regcache.h (reg_buffer_common): New structure.
* regcache.c (reg_buffer::invalidate): Move from detached_regcache.
(reg_buffer::raw_supply): Likewise.
(reg_buffer::raw_supply_integer): Likewise.
(reg_buffer::raw_supply_zeroed): Likewise.
(reg_buffer::raw_collect): Likewise.
(reg_buffer::raw_collect_integer): Likewise.
* regcache.h (reg_buffer::invalidate): Move from detached_regcache.
(reg_buffer::raw_supply): Likewise.
(reg_buffer::raw_supply_integer): Likewise.
(reg_buffer::raw_supply_zeroed): Likewise.
(reg_buffer::raw_collect): Likewise.
(reg_buffer::raw_collect_integer): Likewise.
gdbserver/
* regcache.c (new_register_cache): Use new.
(free_register_cache): Use delete.
(register_data): Use const.
(supply_register): Move body inside regcache.
(regcache::raw_supply): New override function.
(collect_register): Move body inside regcache.
(regcache::raw_collect): New override function.
(regcache::get_register_status): New override function.
* regcache.h (struct regcache): Inherit from reg_buffer_common.
This removes a use of queue.h from gdbserver/event-loop.c, replacing
it with std::queue.
I was not completely sure whether std::queue is even that useful.
Perhaps plain std::list could be used just as easily.
Tested by the buildbot.
gdb/gdbserver/ChangeLog
2018-06-09 Tom Tromey <tom@tromey.com>
* event-loop.c (gdb_event, gdb_event_p): Remove typedefs. Don't
declare queue.
(event_queue): Use std::queue.
(gdb_event_xfree): Remove.
(initialize_event_loop, process_event, wait_for_event): Update.
This makes gdbreplay share a bit more code with gdbserver, and paves
the way to share more in future. Including common-defs.h pulls in
defines and headers that gdb and gdbserver assume are always
defined/available too, such as for example _(), ansidecl.h or a set of
system headers. Including that revealed (static vs extern conflict)
gdbreplay had a local copy of perror_with_name (which exited directly
instead of throwing an error). So I removed gdbreplay's local copy,
and then added enough .o files until gdbreplay linked successfully.
Also, use xstrdup instead of strdup.
gdb/gdbserver/ChangeLog:
2018-06-08 Pedro Alves <palves@redhat.com>
* Makefile.in (GDBREPLAY_OBS): Add common/cleanups.o,
common/common-exceptions.o, common/common-utils.o,
common/errors.o, common/print-utils.o and utils.o.
* gdbreplay.c: Include "common-defs.h" instead of the two
'config.h's here. Don't include stdio.h, errno.h, stdlib.h,
string.h or alloca.h.
(perror_with_name): Delete.
(remote_open): Use xstrdup instead of strdup.
(main): Rename to ...
(captured_main): ... this.
(main): New.
Collect per client specific global data items into struct client_state,
which is similar in purpose to remote.c::remote_state.
gdbserver/ChangeLog
* server.h (struct client_state): New.
* server.c (cont_thread, general_thread, multi_process)
(report_fork_events, report_vfork_events, report_exec_events)
(report_thread_events, swbreak_feature, hwbreak_feature)
(vCont_supported, disable_randomization, pass_signals)
(program_signals, program_signals_p, last_status, last_ptid, own_buf):
Moved to client_state.
* remote-utils.c (remote_debug, noack_mode)
(transport_is_reliable): Moved to client_state.
* tracepoint.c (current_traceframe): Moved to client_state.
Update all callers.
* server.c, remote-utils.c, tracepoint.c, fork-child.c,
linux-low.c, remote-utils.h, target.c: Use client_state.