New in v3:
- Remove things related to the dwarf-5 format.
- Fix compilation on mingw (scoped_mmap.c).
GDB can generate indexes for DWARF debug information, which, when
integrated in the original binary, can speed up loading object files.
This can be done using the gdb-add-index script or directly by the
linker itself. However, not many people know about this. And even
among those who do, because it requires additional steps, I don't know a
lot of people who actually go through that trouble.
To help make using the DWARF index more transparent, this patch
introduces a DWARF index cache. When enabled, loading an index-less
binary in GDB will automatically save an index file in ~/.cache/gdb.
When loading that same object file again, the index file will be looked
up and used to load the DWARF index. You therefore get the benefit of
the DWARF index without having to do additional manual steps or
modifying your build system. When an index section is already present
in the file, GDB will prefer that one over looking up the cache.
When doing my edit-compile-debug cycle, I often debug multiple times the
same build, so the cache helps reducing the load time of the debug
sessions after the first one.
- The saved index file is exactly the same as the output of the "save
gdb-index" command. It is therefore the exact same content that would
be found in the .gdb_index or .debug_names section. We just leave it
as a standalone file instead of merging it in the binary.
- The cache is just a directory with files named after the object
file's build-id. It is not possible to save/load the index for an
object file without build-id in the cache.
- The cache uses the gdb index format. The problem with the dwarf-5
format is that we can generate an addendum to the .debug_str section
that you're supposed to integrate to the original binary. This
complicates a little bit loading the data from the cached index files,
so I would leave this for later.
- The size taken up by ~/.cache/gdb is not limited. I was thinking we
could add configurable limit (like ccache does), but that would come
after. Also, maybe a command to flush the cache.
- The cache is disabled by default. I think once it's been out there
and tested for a while, it could be turned on by default, so that
everybody can enjoy it.
- The code was made to follow the XDG specification: if the
XDG_CACHE_HOME environment variable, it is used, otherwise it falls
back to ~/.cache/gdb. It is possible to change it using "set
index-cache directory". On other OSes than GNU/Linux, ~/.cache may
not be the best place to put such data. On macOS it should probably
default to ~/Library/Caches/... On Windows, %LocalAppData%/... I
don't intend to do this part, but further patches are welcome.
- I think that we need to be careful that multiple instances of GDB
don't interfere with each other (not far fetched at all if you run GDB
in some automated script) and the cache is always coherent (either the
file is not found, or it is found and entirely valid). Writing the
file directly to its final location seems like a recipe for failure.
One GDB could read a file in the index while it is being written by
another GDB. To mitigate this, I made write_psymtabs_to_index write
to temporary files and rename them once it's done. Two GDB instances
writing the index for the same file should not step on each other's
toes (the last file to be renamed will stay). A GDB looking up a file
will only see a complete file or no file. Also, if GDB crashes while
generating the index file, it will leave a work-in-progress file, but
it won't be picked up by other instances looking up in the cache.
gdb/ChangeLog:
* common/pathstuff.h (get_standard_cache_dir): New.
* common/pathstuff.c (get_standard_cache_dir): New.
* build-id.h (build_id_to_string): New.
* dwarf-index-common.h (INDEX4_SUFFIX, INDEX5_SUFFIX,
DEBUG_STR_SUFFIX): Move to here.
* dwarf-index-write.c (INDEX4_SUFFIX, INDEX5_SUFFIX,
DEBUG_STR_SUFFIX): Move from there.
(write_psymtabs_to_index): Make non-static, add basename
parameter. Write to temporary files, rename when done.
(save_gdb_index_command): Adjust call to
write_psymtabs_to_index.
* dwarf2read.h (dwarf2_per_objfile) <index_cache_res>: New
field.
* dwarf2read.c (dwz_file) <index_cache_res>: New field.
(get_gdb_index_contents_from_cache): New.
(get_gdb_index_contents_from_cache_dwz): New.
(dwarf2_initialize_objfile): Read index from cache.
(dwarf2_build_psymtabs): Save to index.
* dwarf-index-cache.h: New file.
* dwarf-index-cache.c: New file.
* dwarf-index-write.h: New file.
gdb/testsuite/ChangeLog:
* boards/index-cache-gdb.exp: New file.
* gdb.dwarf2/index-cache.exp: New file.
* gdb.dwarf2/index-cache.c: New file.
* gdb.base/maint.exp: Check if we are using the index cache.
New in v2:
- As Tom pointed out, we don't need to keep the fd around after
mmapping. This simplifies things quite a bit, since we don't need a
new class. It's now just a function that returns a scoped_mmap.
We already have scoped_mmap, which is a thin RAII layer over mmap. If
one simply wants to mmap an entire file for reading, it takes a bit of
boilerplate. This patch introduces the mmap_file function to make this
easier.
gdb/ChangeLog:
* Makefile.in (COMMON_SFILES): Add common/scoped_mmap.c.
* common/scoped_mmap.c: New file.
* common/scoped_mmap.h (destroy): New method.
(~scoped_mmap, reset): Use destroy.
(scoped_mmap): New move constructor.
(mmap_file): New declaration.
* unittests/scoped_mmap-selftests.c (test_normal,
test_invalid_filename, run_tests): New functions.
(_initialize_scoped_mmap_selftests): Register selftest.
This introduces a new header, buildsym-legacy.h, and changes all the
symbol readers to use it. The idea is to put the function-based
interface, that relies on the buildsym_compunit global, into a
separate header. Then when a symbol reader is updated to use the new
interface, it can simply not include buildsym-legacy.h, so it's easy
to be sure that the new API is used everywhere.
gdb/ChangeLog
2018-07-20 Tom Tromey <tom@tromey.com>
* xcoffread.c: Include buildsym-legacy.h.
* windows-nat.c: Include buildsym-legacy.h.
* stabsread.c: Include buildsym-legacy.h.
* mdebugread.c: Include buildsym-legacy.h.
* buildsym-legacy.h: New file.
* buildsym-legacy.c: New file, from buildsym.c.
* go32-nat.c: Include buildsym-legacy.h.
* dwarf2read.c: Include buildsym-legacy.h.
* dbxread.c: Include buildsym-legacy.h.
* cp-namespace.c: Include buildsym-legacy.h.
* coffread.c: Include buildsym-legacy.h.
* buildsym.h: Move some contents to buildsym-legacy.h.
* buildsym.c: Include buildsym-legacy.h. Move many functions to
buildsym-legacy.c.
* Makefile.in (HFILES_NO_SRCDIR): Add buildsym-legacy.h.
I think it doesn't really make sense to allow building gdb without the
CLI. Perhaps at one time this was a goal, but libgdb is long gone and
the CLI is intrinsic to gdb.
So, this patch removes the implementation of this configure option.
It is still recognized (this is autoconf's default), but does nothing.
This simplifies configure.ac and Makefile.in a bit.
Tested by rebuilding.
gdb/ChangeLog
2018-07-17 Tom Tromey <tom@tromey.com>
* configure.ac: Remove --disable-gdbcli.
* configure: Rebuild.
* Makefile.in (SUBDIR_CLI_DEPS, SUBDIR_CLI_LDFLAGS)
(SUBDIR_CLI_CFLAGS): Remove.
(SFILES): Use SUBDIR_CLI_SRCS.
(COMMON_OBS): Use SUBDIR_CLI_OBS.
tests added for:
* number_or_range_parser
In particular, it tests the cur_tok when parsing is finished.
* parse_flags
* parse_flags_qcs
gdb/ChangeLog
2018-07-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/cli-utils-selftests.c
* unittests/cli-utils-selftests.c: New file.
This patch implements IPv6 support for both GDB and gdbserver. Based
on my research, it is the fourth attempt to do that since 2006. Since
I used ideas from all of the previous patches, I also added their
authors's names on the ChangeLogs as a way to recognize their
efforts. For reference sake, you can find the previous attempts at:
https://sourceware.org/ml/gdb-patches/2006-09/msg00192.htmlhttps://sourceware.org/ml/gdb-patches/2014-02/msg00248.htmlhttps://sourceware.org/ml/gdb-patches/2016-02/msg00226.html
The basic idea behind the patch is to start using the new
'getaddrinfo'/'getnameinfo' calls, which are responsible for
translating names and addresses in a protocol-independent way. This
means that if we ever have a new version of the IP protocol, we won't
need to change the code again (or, at least, won't have to change the
majority of the code).
The function 'getaddrinfo' returns a linked list of possible addresses
to connect to. Dealing with multiple addresses proved to be a hard
task with the current TCP auto-retry mechanism implemented on
ser-tcp:net_open. For example, when gdbserver listened only on an
IPv4 socket:
$ ./gdbserver --once 127.0.0.1:1234 ./a.out
and GDB was instructed to try to connect to both IPv6 and IPv4
sockets:
$ ./gdb -ex 'target extended-remote localhost:1234' ./a.out
the user would notice a somewhat big delay before GDB was able to
connect to the IPv4 socket. This happened because GDB was trying to
connect to the IPv6 socket first, and had to wait until the connection
timed out before it tried to connect to the IPv4 socket.
For that reason, I had to rewrite the main loop and implement a new
method for handling multiple connections. After some discussion,
Pedro and I agreed on the following algorithm:
1) For each entry returned by 'getaddrinfo', we try to open a socket
and connect to it.
2.a) If we have a successful 'connect', we just use that connection.
2.b) If we don't have a successfull 'connect', but if we've got a
ECONNREFUSED (meaning the the connection was refused), we keep track
of this fact by using a flag.
2.c) If we don't have a successfull 'connect', but if we've got a
EINPROGRESS (meaning that the connection is in progress), we perform
a 'select' call on the socket until we have a result (either a
successful connection, or an error on the socket).
3) If tcp_auto_retry is true, and we haven't gotten a successful
connection, and at least one of our attempts failed with
ECONNREFUSED, then we wait a little bit (i.e., call
'wait_for_connect'), check to see if there was a
timeout/interruption (in which case we bail out), and then go back
to (1).
After multiple tests, I was able to connect without delay on the
scenario described above, and was also able to connect in all other
types of scenarios.
I also implemented some hostname parsing functions (along with their
corresponding unit tests) which are used to help GDB and gdbserver to
parse hostname strings provided by the user. These new functions are
living inside common/netstuff.[ch]. I've had to do that since IPv6
introduces a new URL scheme, which defines that square brackets can be
used to enclose the host part and differentiate it from the
port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some
time thinking about a reasonable way to interpret what the user wants,
and I came up with the following:
- If the user has provided a prefix that doesn't specify the protocol
version (i.e., "tcp:" or "udp:"), or if the user has not provided
any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when
dealing with 'getaddrinfo') *unless* the host starts with "[" (in
which case, assume it's an IPv6 host).
- If the user has provided a prefix that does specify the protocol
version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect
that.
This method doesn't follow strictly what RFC 2732 proposes (that
literal IPv6 addresses should be provided enclosed in "[" and "]")
because IPv6 addresses still can be provided without square brackets
in our case, but since we have prefixes to specify protocol versions I
think this is not an issue.
Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST'
testcase parameter, which makes it possible to specify the
hostname (without the port) to be used when testing GDB and
gdbserver. For example, to run IPv6 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]'
Or, to run IPv4 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1'
This required a few changes on the gdbserver-base.exp, and also a
minimal adjustment on gdb.server/run-without-local-binary.exp.
Finally, I've implemented a new testcase,
gdb.server/server-connect.exp, which is supposed to run on the native
host and perform various "smoke tests" using different connection
methods.
This patch has been regression-tested on BuildBot and locally, and
also built using a x86_64-w64-mingw32 GCC, and no problems were found.
gdb/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
'unittests/parse-connection-spec-selftests.c'.
(COMMON_SFILES): Add 'common/netstuff.c'.
(HFILES_NO_SRCDIR): Add 'common/netstuff.h'.
* NEWS (Changes since GDB 8.2): Mention IPv6 support.
* common/netstuff.c: New file.
* common/netstuff.h: New file.
* ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'.
(wait_for_connect): Update comment. New parameter
'gdb::optional<int> sock' instead of 'struct serial *scb'.
Use 'sock' directly instead of 'scb->fd'.
(try_connect): New function, with code from 'net_open'.
(net_open): Rewrite main loop to deal with multiple
sockets/addresses. Handle IPv6-style hostnames; implement
support for IPv6 connections.
* unittests/parse-connection-spec-selftests.c: New file.
gdb/gdbserver/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'.
(OBS): Add 'common/netstuff.o'.
(GDBREPLAY_OBS): Likewise.
* gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'.
(remote_open): Implement support for IPv6
connections.
* remote-utils.c: Include 'netstuff.h', 'filestuff.h'
and 'wspiapi.h'.
(handle_accept_event): Accept connections from IPv6 sources.
(remote_prepare): Handle IPv6-style hostnames; implement
support for IPv6 connections.
(remote_open): Implement support for printing connections from
IPv6 sources.
gdb/testsuite/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST'
parameter.
* boards/native-extended-gdbserver.exp: Do not set 'sockethost'
by default.
* boards/native-gdbserver.exp: Likewise.
* gdb.server/run-without-local-binary.exp: Improve regexp used
for detecting when a remote debugging connection succeeds.
* gdb.server/server-connect.exp: New file.
* lib/gdbserver-support.exp (gdbserver_default_get_comm_port):
Do not prefix the port number with ":".
(gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement
support for detecting and using it. Add '$debughost_gdbserver'
to the list of arguments used to start gdbserver. Handle case
when gdbserver cannot resolve a network name.
gdb/doc/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* gdb.texinfo (Remote Connection Commands): Add explanation
about new IPv6 support. Add new connection prefixes.
Neither XM_CDEPS nor NAT_CLIBS are defined anywhere, so remove the
uses.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (CDEPS): Don't mention XM_CDEPS.
(CLIBS): Don't mention NAT_CLIBS.
Nothing defines XM_ADD_FILES, TM_ADD_FILES, or NAT_ADD_FILES any more,
so consequently ADD_FILES and ADD_DEPS are no longer needed. So, this
removes them.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (ADD_FILES, ADD_DEPS): Remove.
(LIBGDB_OBS, clean mostlyclean): Update.
(gdb$(EXEEXT), insight$(EXEEXT)): Update.
This minimizes the "make" output from the yacc and lex rules,
following the same technique as the rest of the Makefile.
The lex rule had a special case to deal with the situation where flex
is not available. I don't think this is needed, so I removed it. If
flex is truly unavailable, the person building gdb can simply "touch"
the output file.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (%.c: %.y): Use ECHO_YACC.
(%.c: %.l): Use ECHO_LEX. Just fail if flex not available.
* silent-rules.mk (ECHO_YACC, ECHO_LEX): New variables.
exec.c ws handled specially in COMMON_OBS, but there doesn't seem to
be a reason for this. This changes the Makefile to treat exec.c as an
ordinary source file.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (ALLDEPFILES): Remove exec.c.
(COMMON_OBS): Remove exec.o.
(COMMON_SFILES): Add exec.c.
I don't think anyone uses lint any more, so this removes the support
for it from the Makefile.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (LINT, LINTFLAGS, LINTFILES, lint): Remove.
This introduces a stamp file for version.c, preventing unnecessary
version.o rebuilds.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (clean mostlyclean): Remove stamp-version.
(version.c): Depend on stamp-version.
(stamp-version): New rule, from version.c rule.
This introduces a stamp file for init.c. This prevents constant
rebuilds of init.o, by arranging for init.c to only be modified when
its contents change. (FWIW this is a standard idiom in use by
Automake and by gdb itself for many years.)
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (init.c): Depend on stamp-init.
(stamp-init): New rule, from init.c rule.
(clean mostlyclean): Remove stamp-init.
This simplifies the INIT_FILES variable. COMMON_OBS includes
CONFIG_OBS and SUBDIR_GCC_COMPILE_OBS, so there's no need to reference
CONFIG_OBS or SUBDIR_GCC_COMPILE_SRCS there. Once this is done, it it
clear that duplicates can't occur, so remove the duplicate-removing
code as well.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (INIT_FILES): Remove CONFIG_SRCS,
SUBDIR_GCC_COMPILE_SRCS.
The init.c build rule has a few sed expressions that aren't necessary
any more. This removes them.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (init.c): Remove some unused sed rules.
The TSOBS variable doesn't seem to serve a useful purpose in
gdb/Makefile.in, so remove it.
gdb/ChangeLog
2018-07-09 Tom Tromey <tom@tromey.com>
* Makefile.in (TSOBS): Remove.
(INIT_FILES): Update.
(LIBGDB_OBS): Update.
(COMMON_SFILES): Add inflow.c.
(SFILES): Remove inflow.c.
macOS requires that the gdb executable be signed in order to be able
to successfully use ptrace. This must be done after each link.
This patch adds a new --enable-codesign configure option so that this
step can be automated.
gdb/ChangeLog
2018-06-28 Tom Tromey <tom@tromey.com>
* NEWS: Mention --enable-codesign.
* silent-rules.mk (ECHO_SIGN): New variable.
* configure.ac: Add --enable-codesign.
* configure: Rebuild.
* Makefile.in (CODESIGN, CODESIGN_CERT): New variables.
(gdb$(EXEEXT)): Optionally invoke codesign.
I have thought for a long time how nice it would be to have cool pretty
printers for GDB's internal types. Well, turns out there are few
already in gdb-gdb.py! Unfortunately, if you build GDB outside of the
source directory, that file never gets loaded. top-gdb will look for a
file called
../path/to/build/gdb/gdb-gdb.py
but that file is in the source directory at
../path/to/src/gdb/gdb-gdb.py
This patch makes it so we copy it to the build directory, just like we
do for gdb-gdb.gdb. With this, I can at least see the file getting
automatically loaded:
(top-gdb) info pretty-printer
global pretty-printers:
builtin
mpx_bound128
objfile /home/emaisin/build/binutils-gdb/gdb/gdb pretty-printers:
type_lookup_function
I noticed that running "make" didn't re-generate gdb-gdb.py from
gdb-gdb.py.in. That's because it's copied when running the configure
script and that's it. I added a rule in the Makefile for that (and for
gdb-gdb.gdb too) and added them as a dependency to the "all" target.
gdb/ChangeLog:
* gdb-gdb.py: Move to...
* gdb-gdb.py.in: ... here.
* configure.ac (AC_CONFIG_FILES): Add gdb-gdb.py.
* Makefile.in (all): Add gdb-gdb.gdb and gdb-gdb.py as
dependencies.
(distclean): Remove gdb-gdb.py when cleaning.
(gdb-gdb.py, gdb-gdb.gdb): New rules.
* configure: Re-generate.
After pulling Alan's change that added aarch64-sve-linux-ptrace.o to
configure.nat, I got an undefined reference to aarch64_sve_get_vq when
doing a "make clean && make". It turns out that re-running configure
(./config.status --recheck) was needed to re-generate the Makefile with
aarch64-sve-linux-ptrace.o included in the object list. Putting
configure.nat in the dependencies of config.status would make sure that
when we modify configure.nat, the configure script is re-ran. I think
it also makes sense because configure.tgt and configure.host are also
there.
gdb/ChangeLog:
* Makefile.in (config.status): Add configure.nat as a
dependency.
Returns 0 for systems without SVE support.
Note the defines taken from Linux kernel headers
in aarch64-sve-linux-ptrace.h.
gdb/
* Makefile.in: Add new header.
* gdb/arch/aarch64.h (sve_vg_from_vl): New macro.
(sve_vl_from_vg): Likewise.
(sve_vq_from_vl): Likewise.
(sve_vl_from_vq): Likewise.
(sve_vq_from_vg): Likewise.
(sve_vg_from_vq): Likewise.
* configure.nat: Add new c file.
* nat/aarch64-sve-linux-ptrace.c: New file.
* nat/aarch64-sve-linux-ptrace.h: New file.
gdbserver/
* configure.srv: Add new c/h file.
The or1k-tdep.o object is missing from the ALL_TARGET_OBS, which means
it's not currently included in an --enable-targets=all build.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add or1k-tdep.o.
REMOTE_OBS was removed from Makefile.in in
18ca73470a, but one reference remains.
This patch removes the lingerer.
ChangeLog
2018-05-27 Tom Tromey <tom@tromey.com>
* Makefile.in (DEPFILES): Don't reference REMOTE_OBS.
Share target description declarations and selection among ppc linux
native targets, core files, gdbserver and IPA.
To avoid complicated define guards, gdbserver and IPA now have
declarations for all descriptions, including 64-bit generated
descriptions when compiled in 32-bit mode. These have always been
linked into the gdbserver and IPA binaries. Because they might be
uninitialized, the selection function checks that the selected
description is initialized.
gdb/ChangeLog:
2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com>
* arch/ppc-linux-common.c: New file.
* arch/ppc-linux-common.h: New file.
* arch/ppc-linux-tdesc.h: New file.
* configure.tgt (powerpc*-*-linux*): Add arch/ppc-linux-common.o.
* Makefile.in (ALL_TARGET_OBS): Add arch/ppc-linux-common.o.
(HFILES_NO_SRCDIR): Add arch/ppc-linux-common.h and
arch/ppc-linux-tdesc.h.
* ppc-linux-nat.c: Include arch/ppc-linux-common.h and
arch/ppc-linux-tdesc.h.
(ppc_linux_nat_target::read_description): Remove target
description matching code. Fill a ppc_linux_features struct and
call ppc_linux_match_description with it. Move comment about ISA
2.05 to ppc-linux-common.c.
* ppc-linux-tdep.c: Include arch/ppc-linux-common.h and
arch/ppc-linux-tdesc.h.
(ppc_linux_core_read_description): Remove target description
matching code. Fill a ppc_linux_features struct and call
ppc_linux_match_description with it.
* ppc-linux-tdep.h (tdesc_powerpc_32l, tdesc_powerpc_64l)
(tdesc_powerpc_altivec32l, tdesc_powerpc_altivec64l)
(tdesc_powerpc_cell32l, tdesc_powerpc_cell64l)
(tdesc_powerpc_vsx32l, tdesc_powerpc_vsx64l)
(tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_64l)
(tdesc_powerpc_isa205_altivec32l, tdesc_powerpc_isa205_altivec64l)
(tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_isa205_vsx64l)
(tdesc_powerpc_e500l): Remove.
gdb/gdbserver/ChangeLog:
2018-05-22 Pedro Franco de Carvalho <pedromfc@linux.vnet.ibm.com>
* configure.srv (srv_tgtobj): Add arch/ppc-linux-common.o.
* Makefile.in (SFILES): Add arch/ppc-linux-common.c.
* linux-ppc-tdesc.h: Rename to linux-ppc-tdesc-init.h.
* linux-ppc-tdesc-init.h (tdesc_powerpc_32l, tdesc_powerpc_64l)
(tdesc_powerpc_altivec32l, tdesc_powerpc_altivec64l)
(tdesc_powerpc_cell32l, tdesc_powerpc_cell64l)
(tdesc_powerpc_vsx32l, tdesc_powerpc_vsx64l)
(tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_64l)
(tdesc_powerpc_isa205_altivec32l, tdesc_powerpc_isa205_altivec64l)
(tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_isa205_vsx64l)
(tdesc_powerpc_e500l): Remove.
* linux-ppc-ipa.c: Include arch/ppc-linux-tdesc.h and
linux-ppc-tdesc-init.h. Don't include linux-ppc-tdesc.h.
* linux-ppc-low.c: Include arch/ppc-linux-common.h,
arch/ppc-linux-tdesc.h, and linux-ppc-tdesc-init.h. Don't include
linux-ppc-tdesc.h.
(ppc_arch_setup): Remove target description matching code. Fill a
ppc_linux_features struct and call ppc_linux_match_description
with it.
I noticed that the printf command did not recognize the \e escape
sequence, used amongst other things to use colors:
(gdb) printf "This is \e[32mgreen\e[m!\n"
Unrecognized escape character \e in format string.
This patch makes format_pieces recognize it, which makes that command
print the expected result in glorious color.
I wrote a really simple unit test for format_pieces.
format_pieces::operator[] is unused so I removed it. I added
format_piece::operator==, which is needed to compare vectors of
format_piece.
gdb/ChangeLog:
PR cli/14975
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/format_pieces-selftests.c.
* common/format.h (format_piece) <operator==>: New.
(format_pieces) <operator[]>: Remove.
* common/format.c (format_pieces::format_pieces): Handle \e.
* unittests/format_pieces-selftests.c: New.
As reported in
https://sourceware.org/ml/gdb-patches/2018-05/msg00042.html
some old versions of flex (2.5.4) don't support the --stdout switch.
Use -t, which is an alias.
gdb/ChangeLog:
* Makefile.in (%.c: %.l): Use -t instead of --stdout.
Prevent a race when building ada-lex.c, and any target of rules .c:.l or
.c:.y. The target should be written only at the last step, else SIGINT
(^C) can leave an inconsistent state. Being .PRECIOUS makes it even
worse.
gdb/ChangeLog:
PR build/22873
* gdb/Makefile.in: (.c:.l, .c:.y): Write the target only in the
last step, and do it atomically.
Since bfd dropped support for SH-5, there's no point in keeping it in
GDB either.
This restores --enable-targets=all builds.
gdb/ChangeLog:
2018-04-16 Pedro Alves <palves@redhat.com>
* MAINTAINERS (sh): Remove.
* Makefile.in (ALL_TARGET_OBS): Remove sh64-tdep.o.
(HFILES_NO_SRCDIR): Remove sh64-tdep.h.
(ALLDEPFILES): Remove sh64-tdep.c.
* NEWS: Mentions that support for SH-5/SH64 is removed.
* configure.tgt (sh*-*-linux*): Remove reference to sh64-tdep.o.
(sh*-*-openbsd*): Ditto.
(sh64-*-elf*): Remove.
(sh*): Remove.
* regcache.c (cooked_write_test): Remove bfd_mach_sh5 case.
* sh-linux-tdep.c: Remove reference to bfd_mach_sh5.
* sh-tdep.c: No longer include "sh64-tdep.h".
(sh_gdbarch_init): Remove reference to bfd_mach_sh5.
* sh64-tdep.c, sh64-tdep.h: Remove files.
Support for m88k was fully removed from bfd, which broke gdb
--enable-targets=all builds:
> gdb/m88k-tdep.c: In function void _initialize_m88k_tdep():
> gdb/m88k-tdep.c:867:21: error: bfd_arch_m88k was not declared in this scope
> gdbarch_register (bfd_arch_m88k, m88k_gdbarch_init, NULL);
There's no point in keeping GDB support for OpenBSD/m88k with no bfd
support, so this commit simply removes the port.
gdb/ChangeLog:
2018-04-16 Pedro Alves <palves@redhat.com>
* MAINTAINERS: Remove m88k.
* Makefile.in (ALL_TARGET_OBS): Remove m88k-tdep.o.
(HFILES_NO_SRCDIR): Remove m88k-tdep.h.
(ALLDEPFILES): Remove m88k-bsd-nat.c and m88k-tdep.c.
* NEWS: Mention that support for OpenBSD/m88k was removed.
* configure.host (m88*-*-*): Remove support.
* configure.nat (m88k-*-*): Remove support.
* configure.tgt (m88*-*-openbsd*): Remove.
* m88k-bsd-nat.c, m88k-tdep.c, m88k-tdep.h: Delete.
With version 7.3 GCC supports new options
-mindirect-branch=<choice>
-mfunction-return=<choice>
The choices are:
keep behaves as before
thunk jumps through a thunk
thunk-external jumps through an external thunk
thunk-inline jumps through an inlined thunk
For thunk and thunk-external, GDB would, on a call to the thunk, step into
the thunk and then resume to its caller assuming that this is an
undebuggable function. On a return thunk, GDB would stop inside the
thunk.
Make GDB step through such thunks instead.
Before:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
30 }
After:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
inc (x=41) at gdb.base/step-indirect-call-thunk.c:23
23 return x + 1;
This is independent of the step-mode. In order to step into the thunk,
you would need to use stepi.
When stepping over an indirect call thunk, GDB would first step through
the thunk, then recognize that it stepped into a sub-routine and resume to
the caller (of the thunk). Not sure whether this is worth optimizing.
Thunk detection is implemented via gdbarch. I implemented the methods for
IA. Other architectures may run into unexpected fails.
The tests assume a fixed number of instruction steps to reach a thunk.
This depends on the compiler as well as the architecture. They may need
adjustments when we add support for more architectures. Or we can simply
drop those tests that cover being able to step into thunks using
instruction stepping.
When using an older GCC, the tests will fail to build and will be reported
as untested:
Running .../gdb.base/step-indirect-call-thunk.exp ...
gdb compile failed, \
gcc: error: unrecognized command line option '-mindirect-branch=thunk'
gcc: error: unrecognized command line option '-mfunction-return=thunk'
=== gdb Summary ===
# of untested testcases 1
gdb/
* infrun.c (process_event_stop_test): Call
gdbarch_in_indirect_branch_thunk.
* gdbarch.sh (in_indirect_branch_thunk): New.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* x86-tdep.h: New.
* x86-tdep.c: New.
* Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o.
(HFILES_NO_SRCDIR): Add x86-tdep.h.
(ALLDEPFILES): Add x86-tdep.c.
* arch-utils.h (default_in_indirect_branch_thunk): New.
* arch-utils.c (default_in_indirect_branch_thunk): New.
* i386-tdep: Include x86-tdep.h.
(i386_in_indirect_branch_thunk): New.
(i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch
function.
* amd64-tdep: Include x86-tdep.h.
(amd64_in_indirect_branch_thunk): New.
(amd64_init_abi): Set in_indirect_branch_thunk gdbarch function.
testsuite/
* gdb.base/step-indirect-call-thunk.exp: New.
* gdb.base/step-indirect-call-thunk.c: New.
* gdb.reverse/step-indirect-call-thunk.exp: New.
* gdb.reverse/step-indirect-call-thunk.c: New.
The previous patch copied the string_view tests from libstdc++. This
patch adjusts them in a similar way that the libstdc++ optional tests
are integrated in our unit test suite.
Not all tests are used, some of them require language features not
present in c++11. For example, we can't use a string_view constructor
where the length is not explicit in a constexpr, because
std::char_traits::length is not a constexpr itself (it is in c++17
though). Nevertheless, a good number of tests are integrated, which
covers pretty well the string_view features.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
string_view-selftests.c.
* unittests/basic_string_view/capacity/1.cc: Adapt to GDB
testsuite.
* unittests/basic_string_view/cons/char/1.cc: Likewise.
* unittests/basic_string_view/cons/char/2.cc: Likewise.
* unittests/basic_string_view/cons/char/3.cc: Likewise.
* unittests/basic_string_view/element_access/char/1.cc:
Likewise.
* unittests/basic_string_view/element_access/char/empty.cc:
Likewise.
* unittests/basic_string_view/element_access/char/front_back.cc:
Likewise.
* unittests/basic_string_view/inserters/char/2.cc: Likewise.
* unittests/basic_string_view/modifiers/remove_prefix/char/1.cc:
Likewise.
* unittests/basic_string_view/modifiers/remove_suffix/char/1.cc:
Likewise.
* unittests/basic_string_view/modifiers/swap/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/compare/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/compare/char/13650.cc:
Likewise.
* unittests/basic_string_view/operations/copy/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/data/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/2.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/3.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/4.cc:
Likewise.
* unittests/basic_string_view/operations/rfind/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/rfind/char/2.cc:
Likewise.
* unittests/basic_string_view/operations/rfind/char/3.cc:
Likewise.
* unittests/basic_string_view/operations/substr/char/1.cc:
Likewise.
* unittests/basic_string_view/operators/char/2.cc: Likewise.
* unittests/string_view-selftests.c: New file.
I want to add a DWARF index-related feature (automatically produce index
files when loading objfiles in GDB), but I don't want to add many
hundred lines to the already too big dwarf2read.c. I thought it would
be a logical split to move everything related to the DWARF index to its
own file.
I first tried to move everything that reads and writes DWARF indices to
a separate file, but found that the "read" part is a little bit
entangled with the rest of dwarf2read.c, so the line is hard to draw
about where to split. The write part is quite isolated though, so I
moved this part to a new file, dwarf-index-write.c. Some things are
necessary to both reading and writing indices, so I placed them in
dwarf-index-common.{c,h}. The idea would be to have a
dwarf-index-read.c eventually that would use it too (for now that code
is still in dwarf2read.c).
This required moving some things to a new dwarf2read.h header, so they
can be read by the code that writes the index.
The patch is big in number of lines, but it's all existing code being
moved around. The only changes are that some functions are not static
anymore, a declaration is added in a .h file, and therefore the comment
is moved there.
I built-tested it with a little and big endian target.
This patch is also available on the users/simark/split-dwarf2read
branch.
gdb/ChangeLog:
* Makefile.in (COMMON_SFILES): Add dwarf-index-common.c and
dwarf-index-write.c
(HFILES_NO_SRCDIR): Add dwarf-index-common.h and dwarf2read.h.
* dwarf-index-common.c: New file.
* dwarf-index-common.h: New file.
* dwarf-index-write.c: New file.
* dwarf2read.c: Include dwarf2read.h and dwarf-index-common.h.
(struct dwarf2_section_info): Move from here.
(dwarf2_section_info_def): Likewise.
(DEF_VEC_O (dwarf2_section_info_def)): Likewise.
(offset_type): Likewise.
(DW2_GDB_INDEX_SYMBOL_STATIC_SET_VALUE): Likewise.
(DW2_GDB_INDEX_SYMBOL_KIND_SET_VALUE): Likewise.
(DW2_GDB_INDEX_CU_SET_VALUE): Likewise.
(byte_swap): Likewise.
(MAYBE_SWAP): Likewise.
(dwarf2_per_cu_ptr): Likewise.
(DEF_VEC_P (dwarf2_per_cu_ptr)): Likewise.
(struct tu_stats): Likewise.
(struct dwarf2_per_objfile): Likewise.
(struct dwarf2_per_cu_data): Likewise.
(struct signatured_type): Likewise.
(sig_type_ptr): Likewise.
(DEF_VEC_P (sig_type_ptr)): Likewise.
(INDEX4_SUFFIX): Likewise.
(INDEX5_SUFFIX): Likewise.
(DEBUG_STR_SUFFIX): Likewise.
(dwarf2_read_section): Make non-static.
(mapped_index_string_hash): Move from here.
(dwarf5_djb_hash): Likewise.
(file_write): Likewise.
(class data_buf): Likewise.
(struct symtab_index_entry): Likewise.
(struct mapped_symtab): Likewise.
(find_slot): Likewise.
(hash_expand): Likewise.
(add_index_entry): Likewise.
(uniquify_cu_indices): Likewise.
(class c_str_view): Likewise.
(class c_str_view_hasher): Likewise.
(class vector_hasher): Likewise.
(write_hash_table): Likewise.
(psym_index_map): Likewise.
(struct addrmap_index_data): Likewise.
(add_address_entry): Likewise.
(add_address_entry_worker): Likewise.
(write_address_map): Likewise.
(symbol_kind): Likewise.
(write_psymbols): Likewise.
(struct signatured_type_index_data): Likewise.
(write_one_signatured_type): Likewise.
(recursively_count_psymbols): Likewise.
(recursively_write_psymbols): Likewise.
(class debug_names): Likewise.
(check_dwarf64_offsets): Likewise.
(psyms_seen_size): Likewise.
(write_gdbindex): Likewise.
(write_debug_names): Likewise.
(assert_file_size): Likewise.
(write_psymtabs_to_index): Likewise.
(save_gdb_index_command): Likewise.
(_initialize_dwarf2_read): Don't register the "save gdb-index"
command.
* dwarf2read.h: New file.
Since I modify the parse_static_tracepoint_marker_definition function in
the next patch, I wanted to write a unit test for it. Doing so showed
that it doesn't handle multiple consecutive static tracepoint
definitions separated by commas. However, the RSP documentation [1]
states that servers may return multiple definitions, like:
1234:6d61726b657231:6578747261207374756666,abba:6d61726b657232:
The problem is that the function uses strlen to compute the length of
the last field (the extra field). If there are additional definitions
in addition to the one we are currently parsing, the returned length
will include those definitions, and we'll try to hex-decode past the
extra field.
This patch changes parse_static_tracepoint_marker_definition to consider
the case where the current definition is followed by a comma and more
definitions. It also adds the unit test that found the issue in the
first place.
I don't think this causes any backwards compatibility issues, because
the previous code only handled single static tracepoint definitions, and
the new code handles that correctly.
gdb/ChangeLog:
* tracepoint.c (parse_static_tracepoint_marker_definition):
Consider case where the definition is followed by more
definitions.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
tracepoint-selftests.c.
* unittests/tracepoint-selftests.c: New.
[1] https://sourceware.org/gdb/onlinedocs/gdb/Tracepoint-Packets.html#qTfSTM
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
Many projects (e.g. the Linux kernel) and build systems use "silent"
rules, which means that they'll only print a summary of what's being
done instead of printing all the detailed command lines. While chatting
on the #gdb IRC channel, I realized a few people (including me) thought
it would be nice to have it in GDB too.
The idea is that too much text is not useful, the important information
gets lost. If there's only the essential information, it's more likely
to be useful. Most of the time, when I look at the build output, it's
to see how it's progressing. By just printing a brief summary of each
operation, I can easily spot what's currently being compiled and
therefore how the build progresses (with time you know the order in
which files are compiled almost by heart).
As with other projects (Linux, automake-based things, probably others),
it's possible to print the complete command lines by passing V=1 to make
(or any other non-zero value).
I had one hesitation about this: when people report build failures, we
are more likely to miss the full compile command line. We'll probably
sometimes need to ask people to include the build log with "make V=1".
I don't think it's a big downside, if other projects the size of the
Linux kernel can live with it, I'm sure we can too.
gdb/ChangeLog:
* silent-rules.mk: New.
* Makefile.in: Include silent-rules.mk
(srcdir, VPATH, top_srcdir): Move up.
(COMPILE): Add ECHO_CXX.
(test-cp-name-parser$(EXEEXT)): Add ECHO_CXXLD.
(init.c): Add ECHO_INIT_C.
(gdb$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
(version.c): Add ECHO_GEN.
(printcmd.o): Add ECHO_CXX.
(target-float.o): Add ECHO_CXX.
(ada-exp.o): Add ECHO_CXX.
(stamp-xml): Add SILENCE and ECHO_GEN_XML_BUILTIN.
(insight$(EXEEXT)): Add ECHO_CXXLD.
* gnulib/configure.ac: Add AM_SILENT_RULES.
* gnulib/aclocal.m4: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* Makefile.in: Include silent-rules.mk.
(srcdir, abs_top_srcdir, abs_srcdir, VPATH): Move up.
(COMPILE): Add ECHO_CXX.
(gdbserver$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
(gdbreplay$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
($(IPA_LIB)): Add SILENCE and ECHO_CXXLD.
(version-generated.c): Add ECHO_GEN.
(stamp-xml): Add SILENCE and ECHO_GEN_XML_BUILTIN_GENERATED.
(IPAGENT_COMPILE): Add ECHO_CXX.
(%-generated.c): Add ECHO_REGDAT.
This patch add some unit tests for the substitute_path_component
function.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/utils-selftests.c.
* unittests/utils-selftests.c: New file.
This commit introduces basic support for baremetal RiscV as a GDB
target. This target is currently only tested against the RiscV software
simulator, which is not included as part of this commit. The target has
been tested against the following RiscV variants: rv32im, rv32imc,
rv32imf, rv32imfc, rv64im, rv64imc, rv64imfd, rv64imfdc.
Across these variants we pass on average 34858 tests, and fail 272
tests, which is ~0.8%.
The RiscV has a feature of its ABI where structures with a single
floating point field, a single complex float field, or one float and
one integer field are treated differently for argument passing. The
new test gdb.base/infcall-nested-structs.exp is added to cover this
feature. As passing these structures should work on all targets then
I've made the test as a generic one, even though, for most targets,
there's probably nothing special about any of these cases.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add riscv-tdep.o
(HFILES_NO_SRCDIR): Add riscv-tdep.h.
(ALLDEPFILES): Add riscv-tdep.c
* configure.tgt: Add riscv support.
* riscv-tdep.c: New file.
* riscv-tdep.h: New file.
* NEWS: Mention new target.
* MAINTAINERS: Add entry for riscv.
gdb/testsuite/ChangeLog:
* gdb.base/infcall-nested-structs.exp: New file.
* gdb.base/infcall-nested-structs.c: New file.
* gdb.base/float.exp: Add riscv support.
This commit moves the path manipulation routines found on utils.c to a
new common/pathstuff.c, and updates the Makefile.in's accordingly.
The routines moved are "gdb_realpath", "gdb_realpath_keepfile" and
"gdb_abspath".
This will be needed because gdbserver will have to call "gdb_abspath"
on my next patch, which implements a way to expand the path of the
inferior provided by the user in order to allow specifying just the
binary name when starting gdbserver, like:
$ gdbserver :1234 a.out
With the recent addition of the startup-with-shell feature on
gdbserver, this scenario doesn't work anymore if the user doesn't have
the current directory listed in the PATH variable.
I had to do a minor adjustment on "gdb_abspath" because we don't have
access to "tilde_expand" on gdbserver, so now the function is using
"gdb_tilde_expand" instead. Otherwise, the code is the same.
Regression tested on the BuildBot, without regressions.
gdb/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (COMMON_SFILES): Add "common/pathstuff.c".
(HFILES_NO_SRCDIR): Add "common/pathstuff.h".
* auto-load.c: Include "common/pathstuff.h".
* common/common-def.h (current_directory): Move here.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up): New
function.
* common/gdb_tilde_expand.h (gdb_tilde_expand_up): New
prototype.
* common/pathstuff.c: New file.
* common/pathstuff.h: New file.
* compile/compile.c: Include "common/pathstuff.h".
* defs.h (current_directory): Move to "common/common-defs.h".
* dwarf2read.c: Include "common/pathstuff.h".
* exec.c: Likewise.
* guile/scm-safe-call.c: Likewise.
* linux-thread-db.c: Likewise.
* main.c: Likewise.
* nto-tdep.c: Likewise.
* objfiles.c: Likewise.
* source.c: Likewise.
* symtab.c: Likewise.
* utils.c: Include "common/pathstuff.h".
(gdb_realpath): Move to "common/pathstuff.c".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
* utils.h (gdb_realpath): Move to "common/pathstuff.h".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "$(srcdir)/common/pathstuff.c".
(OBJS): Add "pathstuff.o".
* server.c (current_directory): New global variable.
(captured_main): Initialize "current_directory".
unpack_bits_as_long is documented as sign-extending its result when
the type is signed. However, it was only doing sign-extension in the
case where the field was a bitfield -- that is, not when the "bitsize"
parameter was 0, indicating the size should be taken from the type.
Also, unpack_bits_as_long was incorrectly computing the shift for
big-endian architectures for the non-bitfield case.
This patch fixes these bugs in a straightforward way. A new selftest
is included.
2018-02-26 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/unpack-selftests.c.
* unittests/unpack-selftests.c: New file.
* value.c (unpack_bits_as_long): Fix bugs in non-bitfield cases.
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
This patch removes the MT port. The removal was annoucned
https://sourceware.org/ml/gdb-announce/2017/msg00006.html
I'll remove MT from the top-level configure later.
gdb:
2018-01-22 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_TARGET_OBS): Remove mt-tdep.o.
* configure.tgt: Remove target mt.
* mt-tdep.c: Remove.
* regcache.c (cooked_read_test): Remove the check for mt.
The "gdb-add-index" script has been resurrected on:
commit caf26be91a
Author: Samuel Bronson <naesten@gmail.com>
Date: Fri Nov 15 16:09:33 2013 -0500
Resurrect gdb-add-index as a contrib script
However, for some reason (I couldn't find it in the archives), only
the script has been checked-in; the Makefile parts responsible for
installing it in the system were left out. This commit fixes that, by
also resurrecting the Makefile and documentation bits.
This commit is part of our effort to upstream the local Fedora GDB
changes. With this commit, we'll only carry a very small
Fedora-specific modification to the script.
gdb/ChangeLog:
2017-01-12 Tom Tromey <tom@tromey.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (install-only): Install gdb-add-index.
gdb/doc/ChangeLog:
2017-01-12 Tom Tromey <tom@tromey.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Index Files): Mention gdb-add-index.
(gdb-add-index man): New section.
* Makefile.in (gdb-add-index.1): New rule to generate manpage
from gdb.texinfo.
We don't build GDB selftests bits when $development is false. However, if
we turn bfd/development.sh:$development to false, common/selftest.c is
compiled which is not expected. It causes the build failure,
selftest.o: In function `selftests::run_tests(char const*)':
binutils-gdb/gdb/common/selftest.c:97: undefined reference to `selftests::reset()'
collect2: error: ld returned 1 exit status
I fix this issue by putting selftest.o selftest-arch.o into CONFIG_OBS
only when $development is true. After this is fixed, there are other
build failures in maint.c, this patch fixes them as well.
In the release mode, the output of these commands are:
(gdb) maintenance selftest
Selftests are not available in a non-development build.
(gdb) maintenance selftest foo
Selftests are not available in a non-development build.
(gdb) maintenance info selftests
Selftests are not available in a non-development build.
gdb:
2018-01-08 Yao Qi <yao.qi@linaro.org>
Simon Marchi <simon.marchi@ericsson.com>
* Makefile.in (COMMON_SFILES): Remove selftest-arch.c and
common/selftest.c.
(COMMON_OBS): Remove selftest.o.
* configure.ac: Append selftest-arch.c and common/selftest.c to
CONFIG_SRCS. Append selftest-arch.o and selftest.o to COMMON_OBS.
* configure: Re-generated.
* maint.c (maintenance_selftest): Wrap selftests::run_tests with
GDB_SELF_TEST.
(maintenance_info_selftests): Likewise.
gdb/testsuite:
2018-01-08 Simon Marchi <simon.marchi@ericsson.com>
* gdb.gdb/unittest.exp: Match output in non-development mode.
On irc, Pedro pointed out that dependencies for objects in
subdirectories didn't seem to be working.
The bug was that the "-include" for .deps files was using the wrong file
name for subdirectory objects; e.g., for cli/cli-decode.o it was trying
to open .deps/cli/cli-decode.o, whereas the correct file is
cli/.deps/cli-decode.o.
This patch changes how the dep files are found. Tested by touching a
source file and rebuilding cli/cli-decode.o.
2017-12-01 Tom Tromey <tom@tromey.com>
* Makefile.in (all_deps_files): New variable.
Include .Po files using all_deps_files.
Joel pointed out that gdb snapshots were broken by my Makefile patch
series. The bug is that rmdir in distclean was failing, because the
directory did not exist. This fixes the bug by only invoking rmdir when
the directory exists.
Tested using "src-release.sh gdb".
2017-11-29 Tom Tromey <tom@tromey.com>
* Makefile.in (distclean): Handle the case where rmdir fails.
This removes REMOTE_OBS from the Makefile. It is no longer needed, as
remote support is always built into gdb. The relevant sources are now
added to COMMON_SFILES, where they are treated like other ordinary
sources.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (REMOTE_OBS): Remove.
(SFILES): Remove remote sources.
(COMMON_SFILES): Add remote sources.
(ALLDEPFILES): Remove dcache.c.
Move the object files corresponding to target/*.c to the target
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_TARGET_SRCS, SUBDIR_TARGET_OBS): New
variables.
(SFILES): Use SUBDIR_TARGET_SRCS.
(COMMON_OBS): Use SUBDIR_TARGET_OBS. Remove waitstatus.o.
(CONFIG_SRC_SUBDIR): Add target.
(%.o): Remove target rule.
While working on the previous patch, I found a few .o files whose
corresponding .c file was not mentioned in Makefile.in. This patch
fixes the problem. I pulled this out separately to make it simpler to
review.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (COMMON_OBS): Remove filename-seen-cache.o,
registry.o, thread-fsm.o, debug.o.
(COMMON_SFILES): Add filename-seen-cache.c, registry.c,
thread-fsm.c, debug.c.
This introduces a new COMMON_SFILES variable, and then defines some of
COMMON_OBS in terms of this new variable. This simpifies adding a new
ordinary source file.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (COMMON_SFILES): New.
(SFILES): Move some entries to COMMON_SFILES.
(COMMON_OBS): Use COMMON_SFILES.
Change YYOBJ to be defined in terms of YYFILES.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (YYFILES): Update comment.
(YYOBJ): Redefine.
Move the object files corresponding to python/*.c to the python
subdirectory in the build tree.
Because special CFLAGS are passed just to Python compilations, this
patch also required the addition of a pattern rule to update
INTERNAL_CFLAGS for here.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_PYTHON_OBS): Redefine.
(CONFIG_SRC_SUBDIR): Add python.
(%.o): Remove python rule.
(python/%.o): New rule.
* configure: Rebuild.
* configure.ac (CONFIG_OBS): Refer to python/python.o
Move the object files corresponding to guile/*.c to the guile
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac (CONFIG_OBS): Refer to guile/guile.o.
* Makefile.in (SUBDIR_GUILE_OBS): Redefine.
(CONFIG_SRC_SUBDIR): Add guile.
(%.o): Remove guile rule.
Move the object files corresponding to unittests/*.c to the unittests
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_UNITTESTS_OBS): Redefine.
(%.o): Remove unittests rule.
(CONFIG_SRC_SUBDIR): Add unittests.
Move the object files corresponding to tui/*.c to the tui subdirectory
in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_TUI_OBS): Redefine.
(CONFIG_SRC_SUBDIR): Add tui.
(%.o): Remove tui rule.
Move the object files corresponding to compile/*.c to the compile
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_GCC_COMPILE_OBS): Redefine.
(%.o): Remove compile rule.
(CONFIG_SRC_SUBDIR): Add compile.
Move object files corresponding to mi/*.c to a subdirectory in the
build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_MI_OBS): Redefine.
(%.o): Remove mi rule.
(CONFIG_SRC_SUBDIR): Add mi.
(COMMON_OBS): Use mi/mi-common.o
Following the "arch" move, this moves the object files corresponding
to the cli/*.c source files to the "cli" build directory.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_CLI_OBS): Redefine.
(%.o): Remove cli rule.
(CONFIG_SRC_SUBDIR): Add cli.
This implements a simpler way to make the "arch" build directory --
namely, now it is done as an order-only dependency in the Makefile,
rather than being created when config.status is run. This simpler
because it means that the build directories can be changed without
re-running autoconf.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* configure.ac (CONFIG_SRC_SUBDIR): Don't subst.
* configure: Rebuild.
* Makefile.in (CONFIG_SRC_SUBDIR): Redefine.
(CONFIG_DEP_SUBDIR): New variable.
(%.o): Add order-only dependency.
($(CONFIG_DEP_SUBDIR)): New target.
This patch C++ifies the thread_item and threads_listing_context
structures in remote.c. thread_item::{extra,name} are changed to
std::string. As a result, there's a bit of awkwardness in
remote_update_thread_list, where we have to xstrdup those strings when
filling the private_thread_info structure. This is removed in the
following patch, where private_thread_info is also C++ified and its
corresponding fields made std::string too. The xstrdup then becomes an
std::move.
Other than that there's nothing really special, it's a usual day-to-day
VEC -> vector and char* -> std::string change. It allows removing a
cleanup in remote_update_thread_list.
Note that an overload of hex2bin that returns a gdb::byte_vector is
added, with corresponding selftests.
gdb/ChangeLog:
* remote.c (struct thread_item): Add constructor, disable copy
construction and copy assignment, define default move
construction and move assignment.
<extra, name>: Change type to std::string.
<core>: Initialize.
<thread_handle>: Make non-pointer.
(thread_item_t): Remove typedef.
(DEF_VEC_O(thread_item_t)): Remove.
(threads_listing_context) <contains_thread>: New method.
<remove_thread>: New method.
<items>: Change type to std::vector.
(clear_threads_listing_context): Remove.
(threads_listing_context_remove): Remove.
(remote_newthread_step): Use thread_item constructor, adjust to
change to std::vector.
(start_thread): Use thread_item constructor, adjust to change to
std::vector.
(end_thread): Adjust to change to std::vector and std::string.
(remote_get_threads_with_qthreadinfo): Use thread_item
constructor, adjust to std::vector.
(remote_update_thread_list): Adjust to change to std::vector and
std::string, use threads_listing_context methods.
(remove_child_of_pending_fork): Adjust.
(remove_new_fork_children): Adjust.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add rsp-low-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add rsp-low-selftests.o.
* unittests/rsp-low-selftests.c: New file.
* common/rsp-low.h: Include common/byte-vector.h.
(hex2bin): New overload.
* common/rsp-low.c (hex2bin): New overload.
This second patch introduces mfpr_float_ops, an new implementation
of target_float_ops. This implements precise emulation of target
floating-point formats using the MPFR library. This is then used
to perform operations on types that do not match any host type.
Note that use of MPFR is still not required. The patch adds
a configure option --with-mpfr similar to --with-expat. If use of
MPFR is disabled via the option or MPFR is not available, code will
fall back to current behavior. This means that operations on types
that do not match any host type will be implemented on the host
long double type instead.
A new test case verifies that we can correctly print the largest
__float128 value now.
gdb/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* NEWS: Document use of GNU MPFR.
* README: Likewise.
* Makefile.in (LIBMPFR): Add define.
(CLIBS): Add $(LIBMPFR).
* configure.ac: Add --with-mpfr configure option.
* configure: Regenerate.
* config.in: Regenerate.
* target-float.c [HAVE_LIBMPFR]: Include <mpfr.h>.
(class mpfr_float_ops): New type.
(mpfr_float_ops::from_target): Two new overloaded functions.
(mpfr_float_ops::to_target): Likewise.
(mpfr_float_ops::to_string): New function.
(mpfr_float_ops::from_string): Likewise.
(mpfr_float_ops::to_longest): Likewise.
(mpfr_float_ops::from_longest): Likewise.
(mpfr_float_ops::from_ulongest): Likewise.
(mpfr_float_ops::to_host_double): Likewise.
(mpfr_float_ops::from_host_double): Likewise.
(mpfr_float_ops::convert): Likewise.
(mpfr_float_ops::binop): Likewise.
(mpfr_float_ops::compare): Likewise.
(get_target_float_ops): Use mpfr_float_ops if available.
gdb/doc/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.texinfo (Requirements): Document use of GNU MPFR.
gdb/testsuite/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.base/float128.c (large128): New variable.
* gdb.base/float128.exp: Add test to print largest __float128 value.
In my patch
Get rid of VEC (mem_region)
a664f67e50
I introduced a regression, where the length of the memory region is
assigned to the "hi" field. It should obviously be computed as "start +
length". To my defense, no test had caught this :). As a penance, I
wrote one.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
memory-map-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add memory-map-selftests.o.
* memory-map.c (memory_map_start_memory): Fix computation of hi
address.
* unittests/memory-map-selftests.c: New file.
A few places in the completion code look for a "(" to find a
function's parameter list, in order to strip it, because psymtabs (and
gdb index) don't include parameter info in the symbol names.
See compare_symbol_name and
default_collect_symbol_completion_matches_break_on.
This is too naive. Consider:
ns_overload2_test::([TAB]
We'd want to complete that to:
ns_overload2_test::(anonymous namespace)::struct_overload2_test
Or:
b (anonymous namespace)::[TAB]
That currently completes to:
b (anonymous namespace)
Which is obviously broken. This patch makes that work.
Also, the current compare_symbol_name hack means that while this
works:
"b function([TAB]" -> "b function()"
This does not:
"b function ([TAB]"
This patch fixes that. Whitespace "ignoring" now Just Works, i.e.,
assuming a symbol named "function(int, long)", this:
b function ( int , lon[TAB]
completes to:
b function ( int , long)
To address all of this, this patch builds on top of the rest of the
series, and pushes the responsibility of stripping parameters from a
lookup name to the new lookup_name_info object, where we can apply
per-language rules. Also note that we now only make a version of the
lookup name with parameters stripped out where it's actually required
to do that, in the psymtab and GDB index code.
For C++, the right way to strip parameters is with "cp_remove_params",
which uses a real parser (cp-name-parser.y) to split the name into a
component tree and then discards parameters.
The trouble for completion is that in that case we have an incomplete
name, like "foo::func(int" and thus cp_remove_params throws an error.
This patch sorts that by adding a cp_remove_params_if_any variant of
cp_remove_params that tries removing characters from the end of the
string until cp_remove_params works. So cp_remove_params_if_any
behaves like this:
With a complete name:
"foo::func(int)" => foo::func(int) # cp_remove_params_1 succeeds the first time.
With an incomplete name:
"foo::func(int" => NULL # cp_remove_params fails the first time.
"foo::func(in" => NULL # and again...
"foo::func(i" => NULL # and again...
"foo::func(" => NULL # and again...
"foo::func" => "foo::func" # success!
Note that even if this approach removes significant rightmost
characters, it's still OK, because this parameter stripping is only
necessary for psymtabs and gdb index, where we're determining whether
to expand a symbol table. Say cp_remove_params_if_any returned
"foo::" above for "foo::func(int". That'd cause us to expand more
symtabs than ideal (because we'd expand all symtabs with symbols that
start with "foo::", not just "foo::func"), but then when we actually
look for completion matches, we'd still use the original lookup name,
with parameter information ["foo::func(int"], and thus we'll return no
false positive to the user. Whether the stripping works as intended
and doesn't strip too much is thus covered by a unit test instead of a
testsuite test.
The "if_any" part of the name refers to the fact that while
cp_remove_params returns NULL if the input name has no parameters in
the first place, like:
"foo::func" => NULL # cp_remove_params
cp_remove_params_if_any still returns the function name:
"foo::func" => "foo::func" # cp_remove_params_if_any
gdb/ChangeLog:
2017-11-08 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/lookup_name_info-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add lookup_name_info-selftests.o.
* cp-support.c: Include "selftest.h".
(cp_remove_params_1): Rename from cp_remove_params. Add
'require_param' parameter, and handle it.
(cp_remove_params): Reimplement.
(cp_remove_params_if_any): New.
(selftests::quote): New.
(selftests::check_remove_params): New.
(selftests::test_cp_remove_params): New.
(_initialize_cp_support): Install
selftests::test_cp_remove_params.
* cp-support.h (cp_remove_params_if_any): Declare.
* dwarf2read.c :Include "selftest.h".
(dw2_expand_symtabs_matching_symbol): Use
lookup_name_info::make_ignore_params.
(selftests::dw2_expand_symtabs_matching::mock_mapped_index)
(selftests::dw2_expand_symtabs_matching::string_or_null)
(selftests::dw2_expand_symtabs_matching::check_match)
(selftests::dw2_expand_symtabs_matching::test_symbols)
(selftests::dw2_expand_symtabs_matching::run_test): New.
(_initialize_dwarf2_read): Register
selftests::dw2_expand_symtabs_matching::run_test.
* psymtab.c (psym_expand_symtabs_matching): Use
lookup_name_info::make_ignore_params.
* symtab.c (demangle_for_lookup_info::demangle_for_lookup_info):
If the lookup name wants to ignore parameters, strip them.
(compare_symbol_name): Remove sym_text/sym_text_len parameters and
code handling '('.
(completion_list_add_name): Don't pass down sym_text/sym_text_len.
(default_collect_symbol_completion_matches_break_on): Don't try to
strip parameters.
* symtab.h (lookup_name_info::lookup_name_info): Add
'ignore_parameters' parameter.
(lookup_name_info::ignore_parameters)
(lookup_name_info::make_ignore_params): New methods.
(lookup_name_info::m_ignore_parameters): New field.
* unittests/lookup_name_info-selftests.c: New file.
This commit garbage collects the termio and sgtty support.
GDB's terminal handling code still has support for the old termio and
sgtty interfaces in addition to termios. However, I think it's pretty
safe to assume that for a long, long time, Unix-like systems provide
termios. GNU/Linux, Solaris, Cygwin, AIX, DJGPP, macOS and the BSDs
all have had termios.h for many years. Looking around the web, I
found discussions about FreeBSD folks trying to get rid of old sgtty.h
a decade ago:
https://lists.freebsd.org/pipermail/freebsd-hackers/2007-March/019983.html
So I think support for termio and sgtty in GDB is just dead code that
is never compiled anywhere and is just getting in the way. For
example, serial_noflush_set_tty_state and the raw<->cooked concerns
mentioned in inflow.c only exist because of sgtty (see
hardwire_noflush_set_tty_state).
Regtested on GNU/Linux.
Confirmed that I can still build Solaris, DJGPP and AIX GDB and that
the resulting GDBs still include the termios.h-guarded code.
Confirmed mingw-w64 GDB still builds and skips the termios.h-guarded
code.
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* Makefile.in (SER_HARDWIRE): Update comment.
(HFILES_NO_SRCDIR): Remove gdb_termios.h.
* common/gdb_termios.h: Delete file.
* common/job-control.c: Include termios.h and unistd.h instead of
gdb_termios.h.
(gdb_setpgid): Remove HAVE_TERMIOS || TIOCGPGRP preprocessor
check.
(have_job_control): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS.
Remove sgtty code.
* configure.ac: No longer check for termio.h and sgtty.h.
* configure: Regenerate.
* inflow.c: Include termios.h instead of gdb_termios.h. Replace
PROCESS_GROUP_TYPE checks with HAVE_TERMIOS_H checks throughout.
Replace PROCESS_GROUP_TYPE references with pid_t references
throughout.
(gdb_getpgrp): Delete.
(set_initial_gdb_ttystate): Use tcgetpgrp instead of gdb_getpgrp.
(child_terminal_inferior): Remove comment. Remove sgtty code.
(child_terminal_ours_1): Use tcgetpgrp directly instead of
gdb_getpgrp. Use serial_set_tty_state instead aof
serial_noflush_set_tty_state. Remove sgtty code.
* inflow.h: Include unistd.h instead of gdb_termios.h. Replace
PROCESS_GROUP_TYPE check with HAVE_TERMIOS_H check.
(inferior_process_group): Now returns pid_t.
* ser-base.c (ser_base_noflush_set_tty_state): Delete.
* ser-base.h (ser_base_noflush_set_tty_state): Delete.
* ser-event.c (serial_event_ops): Update.
* ser-go32.c (dos_noflush_set_tty_state): Delete.
(dos_ops): Update.
* ser-mingw.c (hardwire_ops, tty_ops, pipe_ops, tcp_ops): Update.
* ser-pipe.c (pipe_ops): Update.
* ser-tcp.c (tcp_ops): Update.
* ser-unix.c: Include termios.h instead of gdb_termios.h. Remove
HAVE_TERMIOS checks.
[HAVE_TERMIO] (struct hardwire_ttystate): Delete.
[HAVE_SGTTY] (struct hardwire_ttystate): Delete.
(get_tty_state, set_tty_state): Drop termio and sgtty code, and
assume termios.
(hardwire_noflush_set_tty_state): Delete.
(hardwire_print_tty_state, hardwire_drain_output)
(hardwire_flush_output, hardwire_flush_input)
(hardwire_send_break, hardwire_raw, hardwire_setbaudrate)
(hardwire_setstopbits, hardwire_setparity): Drop termio and sgtty
code, and assume termios.
(hardwire_ops): Update.
(_initialize_ser_hardwire): Remove HAVE_TERMIOS check.
* serial.c (serial_noflush_set_tty_state): Delete.
* serial.h (serial_noflush_set_tty_state): Delete.
(serial_ops::noflush_set_tty_state): Delete.
gdb/gdbserver/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* configure.ac: No longer check for termio.h and sgtty.h.
* configure: Regenerate.
* remote-utils.c: Include termios.h instead of gdb_termios.h.
(remote_open): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS.
Remove termio and sgtty code.
Now that all target FP operations are performed via target-float.c,
this file remains the sole caller of functions in doublest.c and dfp.c.
Therefore, this patch merges the latter files into the former and
makes all their function static there.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.in (SFILES): Remove doublest.c and dfp.c.
(HFILES_NO_SRCDIR): Remove doublest.h and dfp.h.
(COMMON_OBS): Remove doublest.o and dfp.o.
Do not build target-float.c (instead of doublest.c)
with -Wformat-nonliteral.
* doublest.c: Remove file.
* doublest.h: Remove file.
* dfp.c: Remove file.
* dfp.h: Remove file.
* target-float.c: Do not include "doublest.h" and "dfp.h".
(DOUBLEST): Move here from doublest.h.
(enum float_kind): Likewise.
(FLOATFORMAT_CHAR_BIT): Likewise.
(FLOATFORMAT_LARGEST_BYTES): Likewise.
(floatformat_totalsize_bytes): Move here from doublest.c. Make static.
(floatformat_precision): Likewise.
(floatformat_normalize_byteorder, get_field, put_field): Likewise.
(floatformat_is_negative, floatformat_classify, floatformat_mantissa):
Likewise.
(host_float_format, host_double_format, host_long_double_format):
Likewise.
(floatformat_to_string, floatformat_from_string): Likewise.
(floatformat_to_doublest): Likewise. Also, inline the original
convert_floatformat_to_doublest.
(floatformat_from_doublest): Likewise. Also, inline the original
convert_floatformat_from_doublest.
Include "dpd/decimal128.h", "dpd/decimal64.h", and "dpd/decimal32.h".
(MAX_DECIMAL_STRING): Move here from dfp.c.
(match_endianness): Likewise.
(set_decnumber_context, decimal_check_errors): Likewise.
(decimal_from_number, decimal_to_number): Likewise.
(decimal_to_string, decimal_from_string): Likewise. Make static.
(decimal_from_longest, decimal_from_ulongest): Likewise.
(decimal_to_longest): Likewise.
(decimal_binop, decimal_is_zero, decimal_compare): Likewise.
(decimal_convert): Likewise.
This patch introduces the new set of target floating-point handling routines
in target-float.{c,h}. In the end, the intention is that this file will
contain support for all operations in target FP format, fully replacing
both the current doublest.{c,h} and dfp.{c,h}.
To begin with, this patch only adds a target_float_is_zero routine,
which handles the equivalent of decimal_is_zero for both binary and
decimal FP. For the binary case, to avoid conversion to DOUBLEST,
this is implemented using the floatformat_classify routine.
However, it turns out that floatformat_classify actually has a bug
(it was not used to check for zero before), so this is fixed as well.
The new routine is used in both value_logical_not and valpy_nonzero.
There is one extra twist: the code previously used value_as_double
to convert to DOUBLEST and then compare against zero. That routine
performs an extra task: it detects invalid floating-point values
and raises an error. In any place where value_as_double is removed
in favor of some target-float.c routine, we need to replace that check.
To keep this check centralized in one place, I've added a new routine
is_floating_value, which returns a boolean determining whether a
value's type is floating point (binary or decimal), and if so, also
performs the validity check. Since we need to check whether a value
is FP before calling any of the target-float routines anyway, this
seems a good place to add the check without much code size overhead.
In some places where we only want to check for floating-point types
and not perform a validity check (e.g. for the *output* of an operation),
we can use the new is_floating_type routine (in gdbarch) instead.
The validity check itself is done by a new target_float_is_valid
routine in target-float, encapsulating floatformat_is_valid.
ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.c (SFILES): Add target-float.c.
(HFILES_NO_SRCDIR): Add target-float.h.
(COMMON_OBS): Add target-float.o.
* target-float.h: New file.
* target-float.c: New file.
* doublest.c (floatformat_classify): Fix detection of float_zero.
* gdbtypes.c (is_floating_type): New function.
* gdbtypes.h (is_floating_type): Add prototype.
* value.c: Do not include "floatformat.h".
(unpack_double): Use target_float_is_valid.
(is_floating_value): New function.
* value.h (is_floating_value): Add prototype-
* valarith.c: Include "target-float.h".
(value_logical_not): Use target_float_is_zero.
* python/py-value.c: Include "target-float.h".
(valpy_nonzero): Use target_float_is_zero.
'make tags' fails with the following error:
make[2]: Entering directory '/local-ssd/mgulick/gdb/git/binutils-gdb/gdb'
make[2]: *** No rule to make target 'gdb.h', needed by 'TAGS'. Stop.
make[2]: Leaving directory '/local-ssd/mgulick/gdb/git/binutils-gdb/gdb'
The file gdb/gdb.h was removed in commit
65630365f7.
gdb/ChangeLog:
2017-10-30 Mike Gulick <mgulick@mathworks.com>
* Makefile.in (HFILES_NO_SRCDIR): Remove reference to gdb.h.
The print_floating routine currently makes a lot of assumptions about host
and target floating point formats. This patch cleans up many of those.
One problem is that print_floating may currently be called with types
that are not actually floating-point types, and it tries hard to output
those as floating-point values anyway. However, there is only one single
caller of print_floating where this can ever happen: print_scalar_formatted.
And in fact, it is much simpler to handle the case where the value to be
printed is not already of floating-point type right there.
So this patch changes print_scalar_formatted to handle the 'f' format
as follows:
- If the value to be printed is already of floating-point type, just
call print_floating on it.
- Otherwise, if there is a standard target floating-point type of
the same size as the value, call print_floating using that type.
- Otherwise, just print the value as if the 'f' format had not been
specified at all.
This has the overall effect to printing everything the same way as
the old code did, but is overall a lot simpler. (Also, it would
allow us to change the above strategy more easily, if that might
be a more intuitive user interface. For example, in the third
case above, maybe an error would be more appropriate?)
Given that change, print_floating can become much simpler. In particular,
we now always have a floating-point format that we can consult. This
means we can use the floating-point format to programmatically determine
the number of digits necessary to print the value.
The current code uses a hard-coded value of 9, 17, or 35 digits. Note
that this matches the DECIMAL_DIG values for IEEE-32, IEEE-64, and
IEEE-128. (Actually, for IEEE-128 the correct value is 36 -- the 35
seems to be an oversight.) The DECIMAL_DIG value is defined to be
the smallest number so that any number in the target format, when
printed to this number of digits and then scanned back into a binary
floating-point number, will result in the original value.
Now that we always have a FP format, we can just compute the DECIMAL_DIG
value using the formula from the C standard. This will be correct for
*all* FP formats, not just the above list, and it will be correct (as
opposed to current code) if the target formats differ from the host ones.
The patch moves the new logic to a new floatformat_to_string routine
(analogous to the existing decimal_to_string). The print_floating
routine now calls floatformat_to_string or decimal_to_string, making
the separate print_decimal_floating and generic_val_print_decfloat routines
unnecessary.
gdb/ChangeLog:
2017-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* doublest.c (floatformat_precision): New routine.
(floatformat_to_string): Likewise.
* doublest.c (floatformat_to_string): Add prototype.
* printcmd.c (print_scalar_formatted): Only call print_floating
on floating-point types.
* valprint.c: Do not include "floatformat.h".
(generic_val_print_decfloat): Remove.
(generic_val_print): Call generic_val_print_float for both
TYPE_CODE_FLT and TYPE_CODE_DECFLOAT.
(print_floating): Use floatformat_to_string. Handle decimal float.
(print_decimal_floating): Remove, merge into floatformat_to_string.
* value.h (print_decimal_floating): Remove.
* Makefile.in: Do not build doublest.c with -Wformat-nonliteral.
This patch replaces the last usages of VEC(mem_range_s) with
std::vector<mem_range>. This allows getting rid of a few cleanups and
of the DEF_VEC_O(mem_range_s).
I added a test for normalize_mem_ranges to make sure I didn't break
anything there.
Regtested on the buildbot.
gdb/ChangeLog:
* memrange.h (struct mem_range): Define operator< and operator==.
(mem_range_s): Remove.
(DEF_VEC_O (mem_range_s)): Remove.
(normalize_mem_ranges): Change parameter type to std::vector.
* memrange.c (compare_mem_ranges): Remove.
(normalize_mem_ranges): Change parameter type to std::vector,
adjust to vector change.
* exec.c (section_table_available_memory): Return vector, remove
parameter.
(section_table_read_available_memory): Adjust to std::vector
change.
* remote.c (remote_read_bytes): Adjust to std::vector
change.
* tracepoint.h (traceframe_available_memory): Change parameter
type to std::vector.
* tracepoint.c (traceframe_available_memory): Change parameter
type to std::vector, adjust.
* gdb/mi/mi-main.c (mi_cmd_trace_frame_collected): Adjust to
std::vector change.
* gdb/Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/memrange-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add memrange-selftests.o.
* gdb/unittests/memrange-selftests.c: New file.
Support for collecting and supplying general purpose and floating
point registers is provided along with signal frame unwinding. While
FreeBSD/arm kernels do populate NT_FPREGSET notes, they are always
zero-filled, so this implementation ignores them. Recent FreeBSD/arm
kernels generate NT_ARM_VFP notes which are used to supply
floating-point registers. As with Linux, the AT_HWCAP feature flags
are used to determine the correct target description.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add arm-fbsd-tdep.o.
(ALLDEPFILES): Add arm-fbsd-tdep.c.
* NEWS: Mention new FreeBSD/arm target.
* configure.tgt: Add arm*-*-freebsd*.
* arm-fbsd-tdep.c: New file.
* arm-fbsd-tdep.h: New file.
Commit f38307f5 changed COMPILE.post and POSTCOMPILE to remove
$(basename) from the dependency file name computation. However, it
did not update the `-include' at the end of the Makefile.in; this in
effect disabled automatic dependency tracking.
This patch restores the $(basename) wrapper so that the dependency
files are named "file.Po" rather than "file.o.Po".
I also tested the non-gcc3 dependency mode, which pointed out that
this case hadn't been working since the switch to C++. This is also
fixed in this patch.
Tested by rebuilding.
ChangeLog
2017-10-09 Tom Tromey <tom@tromey.com>
* Makefile.in (COMPILE.post, POSTCOMPILE): Restore $(basename).
(COMPILE.pre): Use $(CXX).
This patch moves aarch64-insn.o to arch/aarch64-insn.o. Then, all
arch/*.c are built to arch/*.o, so we don't need a Makefile rule to build
*.o from arch/*.c. This patch removes it too.
gdb:
2017-10-06 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_64_TARGET_OBS): Replace aarch64-insn.o with
arch/aarch64-insn.o.
Remove one rule.
* configure.tgt: Replace aarch64-insn.o with arch/aarch64-insn.o.
It is tested by building GDB for some targets, arm-elf, arm-netbsd,
arm-linux, and aarch64-linux.
gdb:
2017-10-06 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_TARGET_OBS): Replace arm.o, arm-get-next-pcs.o,
and arm-linux.o with arch/arm.o, arch/arm-get-next-pcs.o and
arch/arm-linux.o respectively.
* configure.tgt: Likewise.
This patch changes the build that arch/i386.c is built to arch/i386.o,
instead of i386.o.
gdb:
2017-10-06 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_TARGET_OBS): Rename i386.o to arch/i386.o.
* configure.tgt (i386_tobjs): Replace i386.o with arch/i386.o.
Nowadays, GDB build tree is almost flat, but source tree isn't. We
have arch/ nat/ target/ common/ cli/ mi/ tui/ python/ guile/ directories.
We need to some rules in Makefile for source files in different source
directories, like,
# Rules for compiling .c files in the various source subdirectories.
%.o: ${srcdir}/arch/%.c
$(COMPILE) $<
$(POSTCOMPILE)
%.o: ${srcdir}/nat/%.c
$(COMPILE) $<
$(POSTCOMPILE)
so we should take care of some special case that files' base name is the
same, like,
# Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the
# object file generate by gdb/agent.c.
common-agent.o: $(srcdir)/common/agent.c
$(COMPILE) $(srcdir)/common/agent.c
$(POSTCOMPILE)
As we add more and more files in different directories, it becomes tricky
to name files, because we need take this into account.
This patch takes the first step toward "Replicate src dir in build dir",
that is, we create arch/ directory in buildtree, and put amd64.o there
as an example. Dependency tracking is updated for files with directory
name. Currently, when we build amd64.o,
"-c -o amd64.o -MT amd64.o -MMD -MP -MF .deps/amd64.Tpo"
with this patch applied, it becomes,
"-c -o arch/amd64.o -MT arch/amd64.o -MMD -MP -MF arch/.deps/amd64.o.Tpo"
"make clean" removes the object files, and "make distclean" removes .deps
additionally. configure file create .deps directory in each of
CONFIG_SRC_SUBDIR, and pass it to Makefile.in, so that "make clean" and
"make distclean" can remove stuffs there.
If people agree with this change, I'll add more directories to
CONFIG_SRC_SUBDIR.
gdb:
2017-10-06 Yao Qi <yao.qi@linaro.org>
* Makefile.in (CONFIG_SRC_SUBDIR): New.
(ALL_64_TARGET_OBS): Replace amd64.o with arch/amd64.o.
(clean): Remove object files and dependency files.
(distclean): Remove the directory.
* configure.ac: Invoke AC_CONFIG_COMMANDS.
* configure: Re-generated.
* configure.tgt: Replace amd64.o with arch/amd64.o.
Currently, whenever we want to handle paths provided by the user and
perform tilde expansion on GDB, we rely on "tilde_expand", which comes
from readline. This was enough for our use cases so far, but the
situation will change when we start dealing with paths on gdbserver as
well, which is what the next patches implement.
Unfortunately it is not possible to use "tilde_expand" in this case
because gdbserver doesn't use readline. For that reason I decided to
implement a new "gdb_tilde_expand" function, which is basically a
wrapper for "glob" and its GNU extension, GLOB_TILDE_CHECK. With the
import of the "glob" module from gnulib, we're sure that "glob" always
supports this extension.
gdb/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add gdb_tilde_expand.c.
(HFILES_NO_SRCDIR): Add gdb_tilde_expand.h.
(COMMON_OBS): Add gdb_tilde_expand.o.
* common/gdb_tilde_expand.c: New file.
* common/gdb_tilde_expand.h: Likewise.
gdb/gdbserver/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add $(srcdir)/common/gdb_tilde_expand.c.
(OBS): Add gdb_tilde_expand.o.
This file was only under gdb/ currently because it predates the
gdb/unittests/ directory.
gdb/ChangeLog:
2017-09-28 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/common-utils-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add common-utils-selftests.o.
(COMMON_OBS): Remove utils-selftests.o.
* utils-selftests.c: Move to ...
* unittests/common-utils-selftests.c: ... here and rename self
test to "string_printf".
gdb/monitor.c was removed by 40e0b27 (Delete the remaining ROM monitor
targets).
gdb:
2017-09-19 Yao Qi <yao.qi@linaro.org>
* Makefile.in (monitor.o): Remove the rule.
The following patch modifies xml_escape_text, so I took the opportunity
to write a unit test for it.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add new source file.
(SUBDIR_UNITTESTS_OBS): Add new object file.
* unittests/xml-utils-selftests.c: New file.
Support for collecting and supplying general purpose and floating point
register sets is provided along with signal frame unwinding.
gdb/ChangeLog:
* Makefile.in (ALL_64_TARGET_OBS): Add aarch64-fbsd-tdep.o.
(ALLDEPFILES): Add aarch64-fbsd-tdep.c.
* NEWS: Mention new FreeBSD/aarch64 target.
* configure.tgt: Add aarch64*-*-freebsd*.
* aarch64-fbsd-tdep.c: New file.
* aarch64-fbsd-tdep.h: New file.
This patch changes amd64-linux target descriptions so that they can be
dynamically generated in both GDB and GDBserver.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* Makefile.in (arch-amd64.o): New rule.
* configure.srv: Append arch-amd64.o.
* linux-amd64-ipa.c: Include common/x86-xstate.h.
(get_ipa_tdesc): Call amd64_linux_read_description.
(initialize_low_tracepoint): Don't call init_registers_x32_XXX
and init_registers_amd64_XXX.
* linux-x86-low.c (x86_linux_read_description): Call
amd64_linux_read_description.
(x86_get_ipa_tdesc_idx): Call amd64_get_ipa_tdesc_idx.
(initialize_low_arch): Don't call init_registers_x32_XXX and
init_registers_amd64_XXX.
* linux-x86-tdesc-selftest.c: Declare init_registers_amd64_XXX
and tdesc_amd64_XXX.
[__x86_64__] (amd64_tdesc_test): New function.
(initialize_low_tdesc) [__x86_64__]: Call init_registers_x32_XXX
and init_registers_amd64_XXX.
* linux-x86-tdesc.c: Include arch/amd64.h.
(xcr0_to_tdesc_idx): New function.
(i386_linux_read_description): New function.
(amd64_get_ipa_tdesc_idx): New function.
* linux-x86-tdesc.h (amd64_get_ipa_tdesc_idx): Declare.
(amd64_get_ipa_tdesc): Declare.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* amd64-linux-tdep.c: Include arch/amd64.h. Don't include
features/i386/*.c.
(amd64_linux_read_description): Call
amd64_create_target_description.
* arch/amd64.c: New file.
* arch/amd64.h: New file.
* configure.tgt (x86_64-*-linux*): Append amd64.o.
* Makefile.in (ALL_64_TARGET_OBS): Append amd64.o.
The code on creating i386-linux target descriptions are quite similar
between GDB and GDBserver, so this patch moves them into a shared file
arch/i386.c. I didn't name it as i386-linux.c, because I want to reuse it
to create other i386 non-linux target descriptions later.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_TARGET_OBS): Add i386.o.
(SFILES): Add arch/i386.c.
(HFILES_NO_SRCDIR): Add arch/i386.h.
* arch/i386.c: New file.
* arch/i386.h: New file.
* arch/tdesc.h (allocate_target_description): Declare.
(set_tdesc_architecture): Declare.
(set_tdesc_osabi): Declare.
* configure.tgt (i[34567]86-*-linux*): Add i386.o.
* i386-linux-tdep.c: Don't include ../features/i386/32bit-XXX.c.
include arch/i386.h.
(i386_linux_read_description): Remove code and call
i386_create_target_description.
(set_tdesc_architecture): New function.
(set_tdesc_osabi): New function.
* target-descriptions.h (allocate_target_description): Remove.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* Makefile.in (arch-i386.o): New rule.
* configure.srv (i[34567]86-*-linux*): Add arch-i386.o.
(x86_64-*-linux*): Likewise.
* linux-x86-tdesc.c: Don't include ../features/i386/32bit-XXX.c,
include arch/i386.h.
(i386_linux_read_description): Remove code and call
i386_create_target_description.
* tdesc.c (allocate_target_description): New function.
* tdesc.h (set_tdesc_architecture): Remove declaration.
(set_tdesc_osabi): Likewise.
An array_view is an abstraction that provides a non-owning view over a
sequence of contiguous objects.
A way to put it is that array_view is to std::vector (and std::array
and built-in arrays with rank==1) like std::string_view is to
std::string.
The main intent of array_view is to use it as function input parameter
type, making it possible to pass in any sequence of contiguous
objects, irrespective of whether the objects live on the stack or heap
and what actual container owns them. Implicit construction from the
element type is supported too, making it easy to call functions that
expect an array of elements when you only have one element (usually on
the stack). For example:
struct A { .... };
void function (gdb::array_view<A> as);
std::vector<A> std_vec = ...;
std::array<A, N> std_array = ...;
A array[] = {...};
A elem;
function (std_vec);
function (std_array);
function (array);
function (elem);
Views can be either mutable or const. A const view is simply created
by specifying a const T as array_view template parameter, in which
case operator[] of non-const array_view objects ends up returning
const references. (Making the array_view itself const is analogous to
making a pointer itself be const. I.e., disables re-seating the
view/pointer.) Normally functions will pass around array_views by
value.
Uses of gdb::array_view (other than the ones in the unit tests) will
be added in a follow up patch.
gdb/ChangeLog
2017-09-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/array-view-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add array-view-selftests.o.
* common/array-view.h: New file.
* unittests/array-view-selftests.c: New file.
This patch uses GDB self test in GDBserver. The self tests are run if
GDBserver is started with option --selftest.
gdb:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* NEWS: Mention GDBserver's new option "--selftest".
* Makefile.in (SFILES): Remove selftest.c, add common/selftest.c.
* selftest.c: Move it to common/selftest.c.
* selftest.h: Move it to common/selftest.h.
* selftest-arch.c (reset): New function.
(tests_with_arch): Call reset.
gdb/gdbserver:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* Makefile.in (OBS): Add selftest.o.
* configure.ac: AC_DEFINE GDB_SELF_TEST if $development.
* configure, config.in: Re-generated.
* server.c: Include common/sefltest.h.
(captured_main): Handle option --selftest.
gdb/testsuite:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.server/unittest.exp: New.
gdb/doc:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Server): Document "--selftest".
Tab completion when debugging a program binary that uses GDB index is
surprisingly much slower than when GDB uses psymtabs instead. Around
1.5x/3x slower. That's surprising, because the whole point of GDB
index is to speed things up...
For example, with:
set pagination off
set $count = 0
while $count < 400
complete b string_prin # matches gdb's string_printf
printf "count = %d\n", $count
set $count = $count + 1
end
$ time ./gdb --batch -q ./gdb-with-index -ex "source script.cmd"
real 0m11.042s
user 0m10.920s
sys 0m0.042s
$ time ./gdb --batch -q ./gdb-without-index -ex "source script.cmd"
real 0m4.635s
user 0m4.590s
sys 0m0.037s
Same but with:
- complete b string_prin
+ complete b zzzzzz
to exercise the no-matches worst case, master currently gets you
something like:
with index without index
real 0m11.971s 0m8.413s
user 0m11.912s 0m8.355s
sys 0m0.035s 0m0.035s
Running gdb under perf shows 80% spent inside
maybe_add_partial_symtab_filename, and 20% spent in the lbasename
inside that.
The problem that tab completion walks over all compunit symtabs, and
for each, walks the contained file symtabs. And there a huge number
of file symtabs (each included system header, etc.) that appear in
each compunit symtab's file symtab list. As in, when debugging GDB, I
have 367381 symtabs iterated, when of those only 5371 filenames are
unique...
This was a regression from the earlier (nice) split of symtabs in
compunit symtabs + file symtabs.
The fix here is to add a cache of unique filenames per objfile so that
the walk / uniquing is only done once. There's already a abstraction
for this in symtab.c; this patch moves that code out to a separate
file and C++ifies it bit.
This makes the worst-case scenario above consistently drop to ~2.5s
(1.5s for the "string_prin" hit case), making it over 3.3x times
faster than psymtabs in this use case (7x in the "string_prin" hit
case).
gdb/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_OBS): Add filename-seen-cache.o.
* dwarf2read.c: Include "filename-seen-cache.h".
* dwarf2read.c (dwarf2_per_objfile) <filenames_cache>: New field.
(dw2_map_symbol_filenames): Build and use a filenames_seen_cache.
* filename-seen-cache.c: New file.
* filename-seen-cache.h: New file.
* symtab.c: Include "filename-seen-cache.h".
(struct filename_seen_cache, INITIAL_FILENAME_SEEN_CACHE_SIZE)
(create_filename_seen_cache, clear_filename_seen_cache)
(delete_filename_seen_cache, filename_seen): Delete, parts moved
to filename-seen-cache.h/filename-seen-cache.c.
(output_source_filename, sources_info)
(maybe_add_partial_symtab_filename)
(make_source_files_completion_list): Adjust to use
filename_seen_cache.
As part of the preparation necessary for my upcoming task, I'd like to
propose that we turn gdb_environ into a class. The approach taken
here is simple: the class gdb_environ contains everything that is
needed to manipulate the environment variables. These variables are
stored in an std::vector<char *>, which can be converted to a 'char
**' and passed as argument to functions that need it.
The usage has not changed much. As per Pedro's suggestion, this class
uses a static factory method initialization. This means that when an
instance is created, it is initially empty. When needed, it has to be
initialized using the static method 'from_host_environ'.
As mentioned before, this is a preparation for an upcoming work that I
will be posting in the next few weeks or so. For that work, I'll
probably create another data structure that will contain all the
environment variables that were set by the user using the 'set
environment' command, because I'll need access to them. This will be
much easier with the class-ification of gdb_environ.
As noted, this has been regression-tested with the new version of
environ.exp and no regressions were found.
gdb/ChangeLog:
2017-06-20 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
'unittests/environ-selftests.c'.
(SUBDIR_UNITTESTS_OBS): Add 'environ-selftests.o'.
* charset.c (find_charset_names): Declare object 'iconv_env'.
Update code to use 'iconv_env' object. Remove call to
'free_environ'.
* common/environ.c: Include <utility>.
(make_environ): Delete function.
(free_environ): Delete function.
(gdb_environ::clear): New function.
(gdb_environ::operator=): New function.
(gdb_environ::get): Likewise.
(environ_vector): Delete function.
(set_in_environ): Delete function.
(gdb_environ::set): New function.
(unset_in_environ): Delete function.
(gdb_environ::unset): New function.
(gdb_environ::envp): Likewise.
* common/environ.h: Include <vector>.
(struct gdb_environ): Delete; transform into...
(class gdb_environ): ... this class.
(free_environ): Delete prototype.
(init_environ, get_in_environ, set_in_environ, unset_in_environ,
environ_vector): Likewise.
* infcmd.c (run_command_1): Update code to call
'envp' from 'gdb_environ' class.
(environment_info): Update code to call methods from 'gdb_environ'
class.
(unset_environment_command): Likewise.
(path_info): Likewise.
(path_command): Likewise.
* inferior.c (inferior::~inferior): Delete call to 'free_environ'.
(inferior::inferior): Initialize 'environment' using the host's
information.
* inferior.h: Remove forward declaration of 'struct gdb_environ'.
Include "environ.h".
(class inferior) <environment>: Change type from 'struct
gdb_environ' to 'gdb_environ'.
* mi/mi-cmd-env.c (mi_cmd_env_path): Update code to call
methods from 'gdb_environ' class.
* solib.c (solib_find_1): Likewise
* unittests/environ-selftests.c: New file.
gdb/gdbserver/ChangeLog:
2017-06-20 Sergio Durigan Junior <sergiodj@redhat.com>
* linux-low.c (linux_create_inferior): Adjust code to access the
environment information via 'gdb_environ' class.
* lynx-low.c (lynx_create_inferior): Likewise.
* server.c (our_environ): Make it an instance of 'gdb_environ'.
(get_environ): Return a pointer to 'our_environ'.
(captured_main): Initialize 'our_environ'.
* server.h (get_environ): Adjust prototype.
* spu-low.c (spu_create_inferior): Adjust code to access the
environment information via 'gdb_environ' class.
Because we are compiling .c files containing C++ code, clang++ complains
with:
clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated
If renaming all the source files to .cpp is out of the question, an
alternative is to pass "-x c++" to convince the compiler that we are
really compiling C++. It works fine with GCC too.
gdb/ChangeLog:
* Makefile.in (COMPILE.pre): Add "-x c++".
gdb/gdbserver/ChangeLog:
* Makefile.in (COMPILE.pre): Add "-x c++".
This is the most important (and the biggest, sorry) patch of the
series. It moves fork_inferior from gdb/fork-child.c to
nat/fork-inferior.c and makes all the necessary adjustments to both
GDB and gdbserver to make sure everything works OK.
There is no "most important change" with this patch; all changes are
made in a progressive way, making sure that gdbserver had the
necessary features while not breaking GDB at the same time.
I decided to go ahead and implement a partial support for starting the
inferior with a shell on gdbserver, although the full feature comes in
the next patch. The user won't have the option to disable the
startup-with-shell, and also won't be able to change which shell
gdbserver will use (other than setting the $SHELL environment
variable, that is).
Everything is working as expected, and no regressions were present
during the tests.
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/common-inferior.h"
and "nat/fork-inferior.h".
* common/common-inferior.h: New file, with contents from
"gdb/inferior.h".
* commom/common-utils.c: Include "common-utils.h".
(stringify_argv): New function.
* common/common-utils.h (stringify_argv): New prototype.
* configure.nat: Add "fork-inferior.o" as a dependency for
"*linux*", "fbsd*" and "nbsd*" hosts.
* corefile.c (get_exec_file): Update comment.
* darwin-nat.c (darwin_ptrace_him): Call "gdb_startup_inferior"
instead of "startup_inferior".
(darwin_create_inferior): Call "add_thread_silent" after
"fork_inferior".
* fork-child.c: Cleanup unnecessary includes.
(SHELL_FILE): Move to "common/common-fork-child.c".
(environ): Likewise.
(exec_wrapper): Initialize.
(get_exec_wrapper): New function.
(breakup_args): Move to "common/common-fork-child.c"; rename to
"breakup_args_for_exec".
(escape_bang_in_quoted_argument): Move to
"common/common-fork-child.c".
(saved_ui): New variable.
(prefork_hook): New function.
(postfork_hook): Likewise.
(postfork_child_hook): Likewise.
(gdb_startup_inferior): Likewise.
(fork_inferior): Move to "common/common-fork-child.c". Update
function to support gdbserver.
(startup_inferior): Likewise.
* gdbcore.h (get_exec_file): Remove declaration.
* gnu-nat.c (gnu_create_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* inf-ptrace.c: Include "nat/fork-inferior.h" and "utils.h".
(inf_ptrace_create_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* inferior.h: Include "common-inferior.h".
(trace_start_error): Move to "common/common-utils.h".
(trace_start_error_with_name): Likewise.
(fork_inferior): Move prototype to "nat/fork-inferior.h".
(startup_inferior): Likewise.
(gdb_startup_inferior): New prototype.
* nat/fork-inferior.c: New file, with contents from "fork-child.c".
* nat/fork-inferior.h: New file.
* procfs.c (procfs_init_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* target.h (target_terminal_init): Move prototype to
"target/target.h".
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* target/target.h (target_terminal_init): New prototype, moved
from "target.h".
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* utils.c (gdb_flush_out_err): New function.
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add "nat/fork-inferior.o".
* configure: Regenerate.
* configure.srv (srv_linux_obj): Add "fork-child.o" and
"fork-inferior.o".
(i[34567]86-*-lynxos*): Likewise.
(spu*-*-*): Likewise.
* fork-child.c: New file.
* linux-low.c: Include "common-inferior.h", "nat/fork-inferior.h"
and "environ.h".
(linux_ptrace_fun): New function.
(linux_create_inferior): Adjust function prototype to reflect
change on "target.h". Adjust function code to use
"fork_inferior".
(linux_request_interrupt): Delete "signal_pid".
* lynx-low.c: Include "common-inferior.h" and "nat/fork-inferior.h".
(lynx_ptrace_fun): New function.
(lynx_create_inferior): Adjust function prototype to reflect
change on "target.h". Adjust function code to use
"fork_inferior".
* nto-low.c (nto_create_inferior): Adjust function prototype and
code to reflect change on "target.h". Update comments.
* server.c: Include "common-inferior.h", "nat/fork-inferior.h",
"common-terminal.h" and "environ.h".
(terminal_fd): Moved to fork-child.c.
(old_foreground_pgrp): Likewise.
(restore_old_foreground_pgrp): Likewise.
(last_status): Make it global.
(last_ptid): Likewise.
(our_environ): New variable.
(startup_with_shell): Likewise.
(program_name): Likewise.
(program_argv): Rename to...
(program_args): ...this.
(wrapper_argv): New variable.
(start_inferior): Delete function.
(get_exec_wrapper): New function.
(get_exec_file): Likewise.
(get_environ): Likewise.
(prefork_hook): Likewise.
(post_fork_inferior): Likewise.
(postfork_hook): Likewise.
(postfork_child_hook): Likewise.
(handle_v_run): Update code to deal with arguments coming from the
remote host. Update calls from "start_inferior" to
"create_inferior".
(captured_main): Likewise. Initialize environment variable. Call
"have_job_control".
* server.h (post_fork_inferior): New prototype.
(get_environ): Likewise.
(last_status): Declare.
(last_ptid): Likewise.
(signal_pid): Likewise.
* spu-low.c: Include "common-inferior.h" and "nat/fork-inferior.h".
(spu_ptrace_fun): New function.
(spu_create_inferior): Adjust function prototype to reflect change
on "target.h". Adjust function code to use "fork_inferior".
* target.c (target_terminal_init): New function.
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* target.h: Include <vector>.
(struct target_ops) <create_inferior>: Update prototype.
(create_inferior): Update macro.
* utils.c (gdb_flush_out_err): New function.
* win32-low.c (win32_create_inferior): Adjust function prototype
and code to reflect change on "target.h".
gdb/testsuite/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.server/non-existing-program.exp: Update regex in order to
reflect the fact that gdbserver is now using fork_inferior (with a
shell) to startup the inferior.
GDB and gdbserver now share 'switch_to_thread' because of
fork_inferior. To make things clear, I created a new file name
common/common-gdbthread.h, and left the implementation specific to
each part.
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/common-gdbthread.h".
* common/common-gdbthread.h: New file, with parts from
"gdb/gdbthread.h".
* gdbthread.h: Include "common-gdbthread.h".
(switch_to_thread): Moved to "common/common-gdbthread.h".
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* inferiors.c (switch_to_thread): New function.
This commit moves a few bits responsible for dealing with inferior job
control from GDB to common/, which makes them available to gdbserver.
This is necessary for the upcoming patches that will share
fork_inferior et al between GDB and gdbserver.
We move some parts of gdb/terminal.h to gdb/common/common-terminal.h,
especifically the code that checks terminal features and that are used
to set job_control accordingly.
After sharing parts of gdb/terminal.h, we also to share the two
functions on gdb/inflow.c that are going to be needed by the
fork_inferior rework. They are 'gdb_setpgid' and the new
'have_job_control'. I've also taken the opportunity to give a more
meaningful name to "inflow.c" on common/. Now it is called
"job-control.c" (thanks Pedro for the suggestion).
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "common/job-control.c".
(HFILES_NO_SRCDIR): Add "common/job-control.h".
(COMMON_OBS): Add "job-control.o".
* common/job-control.c: New file, with contents from
"gdb/inflow.c".
* common/job-control.h: New file, with contents from "terminal.h".
* fork-child.c: Include "job-control.h".
* inflow.c: Include "job-control.h".
(gdb_setpgid): Move to "common/common-inflow.c".
(_initialize_inflow): Move setting of "job_control" to
"handle_job_control".
* terminal.h (job_control): Moved to "common/common-terminal.h".
(gdb_setpgid): Likewise.
* top.c: Include "job_control.h".
* utils.c: Likewise.
(job_control): Moved to "job-control.c".
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILE): Add "common/job-control.c".
(OBS): Add "job-control.o".
This patch replaces compile_rx_or_error and make_regfree_cleanup with
a class that wraps a regex_t.
gdb/ChangeLog:
2017-06-07 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add gdb_regex.c.
(COMMON_OBS): Add gdb_regex.o.
* ada-lang.c (ada_add_standard_exceptions)
(ada_add_exceptions_from_frame, name_matches_regex)
(ada_add_global_exceptions, ada_exceptions_list_1): Change regex
parameter type to compiled_regex. Adjust.
(ada_exceptions_list): Use compiled_regex.
* break-catch-throw.c (exception_catchpoint::pattern): Now a
std::unique_ptr<compiled_regex>.
(exception_catchpoint::~exception_catchpoint): Remove regfree
call.
(check_status_exception_catchpoint): Adjust to use compiled_regex.
(handle_gnu_v3_exceptions): Adjust to use compiled_regex.
* breakpoint.c (solib_catchpoint::compiled): Now a
std::unique_ptr<compiled_regex>.
(solib_catchpoint::~solib_catchpoint): Remove regfree call.
(check_status_catch_solib): Adjust to use compiled_regex.
(add_solib_catchpoint): Adjust to use compiled_regex.
* cli/cli-cmds.c (apropos_command): Use compiled_regex.
* cli/cli-decode.c (apropos_cmd): Change regex parameter to
compiled_regex reference. Adjust to use it.
* cli/cli-decode.h: Remove struct re_pattern_buffer forward
declaration. Include "gdb_regex.h".
(apropos_cmd): Change regex parameter to compiled_regex reference.
* gdb_regex.c: New file.
* gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Delete
declarations.
(class compiled_regex): New.
* linux-tdep.c: Include "common/gdb_optional.h".
(struct mapping_regexes): New, factored out from
mapping_is_anonymous_p, and adjusted to use compiled_regex.
(mapping_is_anonymous_p): Use mapping_regexes wrapped in a
gdb::optional and remove cleanups. Adjust to compiled_regex.
* probe.c: Include "common/gdb_optional.h".
(collect_probes): Use compiled_regex and gdb::optional and remove
cleanups.
* skip.c: Include "common/gdb_optional.h".
(skiplist_entry::compiled_function_regexp): Now a
gdb::optional<compiled_regex>.
(skiplist_entry::compiled_function_regexp_is_valid): Delete field.
(free_skiplist_entry): Remove regfree call.
(compile_skip_regexp, skip_rfunction_p): Adjust to use
compiled_regex and gdb::optional.
* symtab.c: Include "common/gdb_optional.h".
(search_symbols): Use compiled_regex and gdb::optional.
* utils.c (do_regfree_cleanup, make_regfree_cleanup)
(get_regcomp_error, compile_rx_or_error): Delete. Some bits moved
to gdb_regex.c.
This patch adds one unit test for gdbarch methods register_to_value and
value_to_register. The test pass different combinations of {regnu, type}
to gdbarch_register_to_value and gdbarch_value_to_register. In order
to do the test, add a new function create_new_frame to create a fake
frame. It can be improved after we converted frame_info to class.
In order to isolate regcache (from target_ops operations on writing
registers, like target_store_registers), the sub-class of regcache in the
test override raw_write. Also, in order to get the right regcache from
get_thread_arch_aspace_regcache, the sub-class of regcache inserts itself
to current_regcache.
Suppose I incorrectly modified the size of buffer as below,
@@ -1228,7 +1228,7 @@ ia64_register_to_value (struct frame_info *frame, int regnum,
int *optimizedp, int *unavailablep)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
- gdb_byte in[MAX_REGISTER_SIZE];
+ gdb_byte in[1];
/* Convert to TYPE. */
if (!get_frame_register_bytes (frame, regnum, 0,
build GDB with "-fsanitize=address" and run unittest.exp, asan can detect
such error
==2302==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fff98193870 at pc 0xbd55ea bp 0x7fff981935a0 sp 0x7fff98193598
WRITE of size 16 at 0x7fff98193870 thread T0
#0 0xbd55e9 in frame_register_unwind(frame_info*, int, int*, int*, lval_type*, unsigned long*, int*, unsigned char*) /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1119
#1 0xbd58c8 in frame_register(frame_info*, int, int*, int*, lval_type*, unsigned long*, int*, unsigned char*) /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1147
#2 0xbd6e25 in get_frame_register_bytes(frame_info*, int, unsigned long, int, unsigned char*, int*, int*) /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1427
#3 0x70080a in ia64_register_to_value /home/yao/SourceCode/gnu/gdb/git/gdb/ia64-tdep.c:1236
#4 0xbf570e in gdbarch_register_to_value(gdbarch*, frame_info*, int, type*, unsigned char*, int*, int*) /home/yao/SourceCode/gnu/gdb/git/gdb/gdbarch.c:2619
#5 0xc05975 in register_to_value_test /home/yao/SourceCode/gnu/gdb/git/gdb/gdbarch-selftests.c:131
Or, even if GDB is not built with asan, GDB just crashes.
*** stack smashing detected ***: ./gdb terminated
Aborted (core dumped)
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* Makefile.in (SFILES): Add gdbarch-selftests.c.
(COMMON_OBS): Add gdbarch-selftests.o.
* frame.c [GDB_SELF_TESTS] (create_new_frame): New function.
* frame.h [GDB_SELF_TESTS] (create_new_frame): Declare.
* gdbarch-selftests.c: New file.
* regcache.h (regcache) <~regcache>: Mark it virtual if
GDB_SELF_TEST.
<raw_write>: Likewise.
Due to my ongoing work to make it possible for gdbserver to start the
inferior using the shell, I had to share the fork_inferior function
under the "nat/" directory. In order to do that, I created a new file
and put the function there; however, this meant that I now had to
update some of the *.mh files (under "gdb/config") and add the new
file as a dependency to be built natively. Bleh...
After talking a bit to Pedro about this, the idea came up to write a
new "gdb/configure.nat" file, a la "gdb/configure.tgt", which would
concentrate all of the native settings for each host/system. I
decided to tackle this issue.
The patch is simple. All of the previous Makefile variables that were
being declared inside the *.mh files are now inside "gdb/Makefile.in",
and "gdb/configure" is responsible for AC_SUBST'ing them. The
definitions of these variables were put inside "gdb/configure.nat", so
now they're shell variables. For excerpts of Makefile code, one must
create a file under "gdb/config/${gdb_cpu_host}" and reference it on
the "nat_extra_makefile_frag" variable.
It should now be easier to update the native dependencies of hosts in
this single file.
This has been tested on x86_64 without regressions.
gdb/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in: Remove "@host_makefile_frag@". Add variables
NAT_FILE, NATDEPFILES, NAT_CDEPS, LOADLIBES, MH_CFLAGS, XM_CLIBS,
NAT_GENERATED_FILES, HAVE_NATIVE_GCORE_HOST. Add
"@nat_extra_makefile_frag@".
(Makefile): Remove dependency on "@frags@".
($(GNULIB_BUILDDIR)/Makefile): Likewise.
(data-directory/Makefile): Likewise.
* config/aarch64/linux.mh: Deleted; moved contents to
"gdb/configure.nat".
* config/alpha/alpha-linux.mh: Likewise.
* config/alpha/nbsd.mh: Likewise.
* config/arm/linux.mh: Likewise.
* config/arm/nbsdelf.mh: Likewise.
* config/i386/cygwin.mh: Likewise.
* config/i386/cygwin64.mh: Likewise.
* config/i386/darwin.mh: Likewise.
* config/i386/fbsd.mh: Likewise.
* config/i386/fbsd64.mh: Likewise.
* config/i386/go32.mh: Likewise.
* config/i386/i386gnu.mh: Likewise.
* config/i386/i386sol2.mh: Likewise.
* config/i386/linux.mh: Likewise.
* config/i386/linux64.mh: Likewise.
* config/i386/mingw.mh: Likewise.
* config/i386/mingw64.mh: Likewise.
* config/i386/nbsd64.mh: Likewise.
* config/i386/nbsdelf.mh: Likewise.
* config/i386/nto.mh: Likewise.
* config/i386/obsd.mh: Likewise.
* config/i386/obsd64.mh: Likewise.
* config/i386/sol2-64.mh: Likewise.
* config/ia64/linux.mh: Likewise.
* config/m32r/linux.mh: Likewise.
* config/m68k/linux.mh: Likewise.
* config/m68k/nbsdelf.mh: Likewise.
* config/m68k/obsd.mh: Likewise.
* config/m88k/obsd.mh: Likewise.
* config/mips/fbsd.mh: Likewise.
* config/mips/linux.mh: Likewise.
* config/mips/nbsd.mh: Likewise.
* config/mips/obsd64.mh: Likewise.
* config/pa/linux.mh: Likewise.
* config/pa/nbsd.mh: Likewise.
* config/pa/obsd.mh: Likewise.
* config/powerpc/aix.mh: Likewise.
* config/powerpc/fbsd.mh: Likewise.
* config/powerpc/linux.mh: Likewise.
* config/powerpc/nbsd.mh: Likewise.
* config/powerpc/obsd.mh: Likewise.
* config/powerpc/ppc64-linux.mh: Likewise.
* config/powerpc/spu-linux.mh: Likewise.
* config/s390/linux.mh: Likewise.
* config/sh/nbsd.mh: Likewise.
* config/sparc/fbsd.mh: Likewise.
* config/sparc/linux.mh: Likewise.
* config/sparc/linux64.mh: Likewise.
* config/sparc/nbsd64.mh: Likewise.
* config/sparc/nbsdelf.mh: Likewise.
* config/sparc/obsd64.mh: Likewise.
* config/sparc/sol2.mh: Likewise.
* config/tilegx/linux.mh: Likewise.
* config/vax/nbsdelf.mh: Likewise.
* config/vax/obsd.mh: Likewise.
* config/xtensa/linux.mh: Likewise.
* config/i386/i386gnu.mn: New file, with excerpts from
"config/i386/i386gnu.mh".
* configure: Regenerate.
* configure.ac: Rewrite code to use "gdb/configure.nat" instead of
*.mh files under "gdb/config".
* configure.nat: New file, with contents from the
"gdb/config/*/*.mh" files.
gdb/doc/ChangeLog:
2017-05-06 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile: Remove "@host_makefile_frag@".
After all the make_cleanup_restore_current_thread fixing, I thought
I'd convert that and its relatives (which are all cleanups) to RAII
classes.
scoped_restore_current_pspace_and_thread was put in a separate file to
avoid a circular dependency.
Tested on x86-64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add progspace-and-thread.c.
(HFILES_NO_SRCDIR): Add progspace-and-thread.h.
(COMMON_OBS): Add progspace-and-thread.o.
* breakpoint.c: Include "progspace-and-thread.h".
(update_inserted_breakpoint_locations)
(insert_breakpoint_locations, create_longjmp_master_breakpoint):
Use scoped_restore_current_pspace_and_thread.
(create_std_terminate_master_breakpoint): Use
scoped_restore_current_program_space.
(remove_breakpoint): Use scoped_restore_current_pspace_and_thread.
(print_breakpoint_location): Use
scoped_restore_current_program_space.
(bp_loc_is_permanent): Use
scoped_restore_current_pspace_and_thread.
(resolve_sal_pc): Use scoped_restore_current_pspace_and_thread.
(download_tracepoint_locations): Use
scoped_restore_current_pspace_and_thread.
(breakpoint_re_set): Use scoped_restore_current_pspace_and_thread.
* exec.c (exec_close_1): Use scoped_restore_current_program_space.
(enum step_over_calls_kind): Moved from inferior.h.
(class scoped_restore_current_thread): New class.
* gdbthread.h (make_cleanup_restore_current_thread): Delete
declaration.
(scoped_restore_current_thread): New class.
* infcmd.c: Include "common/gdb_optional.h".
(continue_1, proceed_after_attach): Use
scoped_restore_current_thread.
(notice_new_inferior): Use scoped_restore_current_thread.
* inferior.c: Include "progspace-and-thread.h".
(restore_inferior, save_current_inferior): Delete.
(add_inferior_command, clone_inferior_command): Use
scoped_restore_current_pspace_and_thread.
* inferior.h (scoped_restore_current_inferior): New class.
* infrun.c: Include "progspace-and-thread.h" and
"common/gdb_optional.h".
(follow_fork_inferior): Use
scoped_restore_current_pspace_and_thread.
(scoped_restore_exited_inferior): New class.
(handle_vfork_child_exec_or_exit): Use
scoped_restore_exited_inferior,
scoped_restore_current_pspace_and_thread,
scoped_restore_current_thread and scoped_restore.
(fetch_inferior_event): Use scoped_restore_current_thread.
* linespec.c (decode_line_full, decode_line_1): Use
scoped_restore_current_program_space.
* mi/mi-main.c: Include "progspace-and-thread.h".
(exec_continue): Use scoped_restore_current_thread.
(mi_cmd_exec_run): Use scoped_restore_current_pspace_and_thread.
(mi_cmd_trace_frame_collected): Use scoped_restore_current_thread.
* proc-service.c (ps_pglobal_lookup): Use
scoped_restore_current_program_space.
* progspace-and-thread.c: New file.
* progspace-and-thread.h: New file.
* progspace.c (release_program_space, clone_program_space): Use
scoped_restore_current_program_space.
(restore_program_space, save_current_program_space)
(save_current_space_and_thread): Delete.
(switch_to_program_space_and_thread): Moved to
progspace-and-thread.c.
* progspace.h (save_current_program_space)
(save_current_space_and_thread): Delete declarations.
(scoped_restore_current_program_space): New class.
* remote.c (remote_btrace_maybe_reopen): Use
scoped_restore_current_thread.
* symtab.c: Include "progspace-and-thread.h".
(skip_prologue_sal): Use scoped_restore_current_pspace_and_thread.
* thread.c (print_thread_info_1): Use
scoped_restore_current_thread.
(struct current_thread_cleanup): Delete.
(do_restore_current_thread_cleanup)
(restore_current_thread_cleanup_dtor): Rename/convert both to ...
(scoped_restore_current_thread::~scoped_restore_current_thread):
... this new dtor.
(make_cleanup_restore_current_thread): Rename/convert to ...
(scoped_restore_current_thread::scoped_restore_current_thread):
... this new ctor.
(thread_apply_all_command): Use scoped_restore_current_thread.
(thread_apply_command): Use scoped_restore_current_thread.
* tracepoint.c (tdump_command): Use scoped_restore_current_thread.
* varobj.c (value_of_root_1): Use scoped_restore_current_thread.
I left making inferior::detaching a bool to a separate patch, because
doing that makes a make_cleanup_restore_integer call in
infrun.c:prepare_for_detach no longer compile (passing a 'bool *' when
an 'int *' is expected). Since we want to get rid of cleanups anyway,
I looked at converting that to a scoped_restore. However,
prepare_for_detach wants to discard the cleanup on success, and
scoped_restore doesn't have an equivalent for that. So I added one --
I called it "release()" because it seems like a natural fit in the way
standard components call similarly-spirited methods, and, it's also
what the proposal for a generic scope guard calls it too, AFAICS:
http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2014/n4189.pdf
I've added some scoped_guard unit tests, while at it.
gdb/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/scoped_restore-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add scoped_restore-selftests.o.
* common/scoped_restore.h (scoped_restore_base): Make "class".
(scoped_restore_base::release): New public method.
(scoped_restore_base::scoped_restore_base): New protected ctor.
(scoped_restore_base::m_saved_var): New protected field.
(scoped_restore_tmpl::scoped_restore_tmpl(T*)): Initialize the
scoped_restore_base base class instead of m_saved_var directly.
(scoped_restore_tmpl::scoped_restore_tmpl(T*, T2)): Likewise.
(scoped_restore_tmpl::scoped_restore_tmpl(const
scoped_restore_tmpl<T>&)): Likewise.
(scoped_restore_tmpl::~scoped_restore_tmpl): Use the saved_var
method.
(scoped_restore_tmpl::saved_var): New method.
(scoped_restore_tmpl::m_saved_var): Delete.
* inferior.h (inferior::detaching): Now a bool.
* infrun.c (prepare_for_detach): Use a scoped_restore instead of a
cleanup.
* unittests/scoped_restore-selftests.c: New file.
Note to self: 'o' before 'p'.
gdb/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS, SUBDIR_UNITTESTS_OBS):
Re-sort in alphabetic order.
I thought I'd add some unit tests to make sure gdb::optional behaved
correctly, and started writing some, but then thought/realized that
libstdc++ already has extensive testing for C++17 std::optional, which
gdb::optional is a subset of, and thought why bother writing something
from scratch. So I tried copying over a subset of libstdc++'s tests
(that ones that cover the subset supported by gdb::optional), and was
positively surprised that they mostly work OOTB. This did help shake
out a few bugs from what I was implementing in the previous patch to
gdb::optional. Still, it's a good chunk of code being copied over, so
if people dislike this copying/duplication, I can drop this patch.
gdb/ChangeLog:
2017-04-18 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/optional-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add optional-selftests.o.
* unittests/optional-selftests.c: New file.
* unittests/optional/assignment/1.cc: New file.
* unittests/optional/assignment/2.cc: New file.
* unittests/optional/assignment/3.cc: New file.
* unittests/optional/assignment/4.cc: New file.
* unittests/optional/assignment/5.cc: New file.
* unittests/optional/assignment/6.cc: New file.
* unittests/optional/assignment/7.cc: New file.
* unittests/optional/cons/copy.cc: New file.
* unittests/optional/cons/default.cc: New file.
* unittests/optional/cons/move.cc: New file.
* unittests/optional/cons/value.cc: New file.
* unittests/optional/in_place.cc: New file.
* unittests/optional/observers/1.cc: New file.
* unittests/optional/observers/2.cc: New file.
As requested, I'm sending this as a separate patch because it is ready
to be included as-is.
The idea here is that both gdb/terminal.h and gdb/gdbserver/terminal.h
share the same code, which is responsible for setting a bunch of
defines on based on the presence of termios.h and a few other headers.
This simple patch just moves this common code to common/gdb_termios.h
and makes the necessary adjustments on both GDB and gdbserver so that
they can use this new header. It also implements the some header
checks on common/common.m4.
As a bonus, gdb/gdbserver/terminal.h can be removed because it's now
empty.
Built on x86_64, no regressions found.
gdb/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/gdb_termios.h".
* common/common.m4: Check headers 'termios.h', 'termio.h' and
'sgtty.h'.
* common/gdb_termios.h: New file, with parts of "terminal.h".
* inflow.c: Include "gdb_termios.h".
* ser-unix.c: Include "gdb_termios.h".
* terminal.h: Move terminal-related defines to
"common/gdb_termios.h".
gdb/gdbserver/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* remote-utils.c: Include "gdb_termios.h" instead of
"terminal.h".
* terminal.h: Delete file.
I posit that this makes them easier to find.
The other day while working on the wchar_t patch, I had a bit of
trouble finding the DJGPP/go32 tdep bits. My initial reaction was
looking for a go32-specific tdep file, but there's none.
Confirmed that a --host=i586-pc-msdosdjgpp GDB still builds
successfully and includes the i386-go32-tdep.o object.
Confirmed that an --enable-targets=all build of GDB on x86-64
GNU/Linux includes the DJGPP/go32 bits too.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Add i386-go32-tdep.o.
* configure.tgt: Handle i[34567]86-*-go32* and
i[34567]86-*-msdosdjgpp*.
* i386-tdep.c (i386_svr4_reg_to_regnum):
Make extern.
(i386_go32_init_abi, i386_coff_osabi_sniffer): Moved to
i386-go32-tdep.c.
(_initialize_i386_tdep): DJGPP bits moved to i386-go32-tdep.c.
* i386-go32-tdep.c: New file.
* i386-tdep.h (tdesc_i386_mmx, i386_svr4_reg_to_regnum): New
declarations.
I grew a bit tired of using ptid_get_{lwp,pid,tid} and friends, so I decided to
make it a bit easier to use by making it a proper class. The fields are now
private, so it's not possible to change a ptid_t field by mistake.
The new methods of ptid_t map to existing functions/practice like this:
ptid_t (pid, lwp, tid) -> ptid_build (pid, lwp, tid)
ptid_t (pid) -> pid_to_ptid (pid)
ptid.is_pid () -> ptid_is_pid (ptid)
ptid == other -> ptid_equal (ptid, other)
ptid != other -> !ptid_equal (ptid, other)
ptid.pid () -> ptid_get_pid (ptid)
ptid.lwp_p () -> ptid_lwp_p (ptid)
ptid.lwp () -> ptid_get_lwp (ptid)
ptid.tid_p () -> ptid_tid_p (ptid)
ptid.tid () -> ptid_get_tid (ptid)
ptid.matches (filter) -> ptid_match (ptid, filter)
I've replaced the implementation of the existing functions with calls to
the new methods. People are encouraged to gradually switch to using the
ptid_t methods instead of the functions (or we can change them all in
one pass eventually).
Also, I'm not sure if it's worth it (because of ptid_t's relatively
small size), but I have made the functions and methods take ptid_t
arguments by const reference instead of by value.
gdb/ChangeLog:
* common/ptid.h (struct ptid): Change to...
(class ptid_t): ... this.
<ptid_t>: New constructors.
<pid, lwp_p, lwp, tid_p, tid, is_pid, operator==, operator!=,
matches>: New methods.
<make_null, make_minus_one>: New static methods.
<pid>: Rename to...
<m_pid>: ...this.
<lwp>: Rename to...
<m_lwp>: ...this.
<tid>: Rename to...
<m_tid>: ...this.
(ptid_build, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal,
ptid_is_pid, ptid_lwp_p, ptid_tid_p, ptid_match): Take ptid arguments
as references, move comment to class ptid_t.
* common/ptid.c (null_ptid, minus_one_ptid): Initialize with
ptid_t static methods.
(ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_tid,
ptid_equal, ptid_is_pid, ptid_lwp_p, ptid_tid_p, ptid_match):
Take ptid arguments as references, implement using ptid_t methods.
* unittests/ptid-selftests.c: New file.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/ptid-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add unittests/ptid-selftests.o.
gdb/gdbserver/ChangeLog:
* server.c (handle_v_cont): Initialize thread_resume::thread
with null_ptid.
FreeBSD last shipped a release for Alpha (6.3) in 2008.
This also removes support for GNU/kFreeBSD on Alpha.
gdb/ChangeLog:
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-fbsd-tdep.o.
(ALLDEPFILES): Remove alpha-fbsd-tdep.c
* NEWS: Mention that support for FreeBSD/alpha was removed.
* alpha-fbsd-tdep.c: Delete file.
* config/alpha/fbsd.mh: Delete file.
* configure.host: Delete alpha*-*-freebsd* and
alpha*-*-kfreebsd*-gnu.
* configure.tgt: Delete alpha*-*-freebsd* and
alpha*-*-kfreebsd*-gnu.
A while ago, back when GDB was a C program, the sect_offset and
cu_offset types were made structs in order to prevent incorrect mixing
of those offsets. Now that we require C++11, we can make them
integers again, while keeping the safety, by exploiting "enum class".
We can add a bit more safety, even, by defining operators that the
types _should_ support, helping making the suspicious uses stand out
more.
Getting at the underlying type is done with the new to_underlying
function added by the previous patch, which also helps better spot
where do we need to step out of the safety net. Mostly, that's around
parsing the DWARF, and when we print the offset for complaint/debug
purposes. But there are other occasional uses.
Since we have to define the sect_offset/cu_offset types in a header
anyway, I went ahead and generalized/library-fied the idea of "offset"
types, making it trivial to add more such types if we find a use. See
common/offset-type.h and the DEFINE_OFFSET_TYPE macro.
I needed a couple generaly-useful preprocessor bits (e.g., yet another
CONCAT implementation), so I started a new common/preprocessor.h file.
I included units tests covering the "offset" types API. These are
mostly compile-time tests, using SFINAE to check that expressions that
shouldn't compile (e.g., comparing unrelated offset types) really are
invalid and would fail to compile. This same idea appeared in my
pending enum-flags revamp from a few months ago (though this version
is a bit further modernized compared to what I had posted), and I plan
on reusing the "check valid expression" bits added here in that
series, so I went ahead and defined the CHECK_VALID_EXPR macro in its
own header -- common/valid-expr.h. I think that's nicer regardless.
I was borderline between calling the new types "offset" types, or
"index" types, BTW. I stuck with "offset" simply because that's what
we're already calling them, mostly.
gdb/ChangeLog:
2017-04-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/offset-type-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add offset-type-selftests.o.
* common/offset-type.h: New file.
* common/preprocessor.h: New file.
* common/traits.h: New file.
* common/valid-expr.h: New file.
* dwarf2expr.c: Include "common/underlying.h". Adjust to use
sect_offset and cu_offset strong typedefs throughout.
* dwarf2expr.h: Adjust to use sect_offset and cu_offset strong
typedefs throughout.
* dwarf2loc.c: Include "common/underlying.h". Adjust to use
sect_offset and cu_offset strong typedefs throughout.
* dwarf2read.c: Adjust to use sect_offset and cu_offset strong
typedefs throughout.
* gdbtypes.h: Include "common/offset-type.h".
(cu_offset): Now an offset type (strong typedef) instead of a
struct.
(sect_offset): Likewise.
(union call_site_parameter_u): Rename "param_offset" field to
"param_cu_off".
* unittests/offset-type-selftests.c: New file.
We will need access to the environment functions when we share
fork_inferior between GDB and gdbserver, therefore we simply make the
API on gdb/environ.[ch] available on common/. No extra adjustments
are needed to make it compile on gdbserver.
gdb/ChangeLog:
2017-03-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Replace "environ.c" with
"common/environ.c".
(HFILES_NO_SRCDIR): Likewise, for "environ.h".
* environ.c: Include "common-defs.h" instead of "defs.h. Moved
to...
* common/environ.c: ... here.
* environ.h: Moved to...
* common/environ.h: ... here.
gdb/gdbserver/ChangeLog:
2017-03-07 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "common/environ.c".
(OBJS): Add "common/environ.h".
This commit adds a new function_view type. This type holds a
non-owning reference to a callable. It is meant to be used as
callback type of functions, instead of using the C-style pair of
function pointer and 'void *data' arguments. function_view allows
passing references to stateful function objects / lambdas with
captures as callbacks efficiently, while function pointer + 'void *'
does not.
See the intro in the new function-view.h header for more.
Unit tests included, put into a new gdb/unittests/ subdir.
gdb/ChangeLog:
2017-02-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS, SUBDIR_UNITTESTS_OBS): New.
(%.o) <unittests/%.c>: New pattern.
* configure.ac ($development): Add $(SUBDIR_UNITTESTS_OBS) to
CONFIG_OBS, and $(SUBDIR_UNITTESTS_SRCS) to CONFIG_SRCS.
* common/function-view.h: New file.
* unittests/function-view-selftests.c: New file.
* configure: Regenerate.
This patch implements the gdb.Record Python object methods and fields for
record target btrace. Also, implement a stub for record target full.
Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com>
gdb/ChangeLog:
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-record-btrace.o,
py-record-full.o.
(SUBDIR_PYTHON_SRCS): Add py-record-btrace.c, py-record-full.c.
* python/py-record-btrace.c, python/py-record-btrace.h,
python/py-record-full.c, python/py-record-full.h: New file.
* python/py-record.c: Add include for py-record-btrace.h and
py-record-full.h.
(recpy_method, recpy_format, recpy_goto, recpy_replay_position,
recpy_instruction_history, recpy_function_call_history, recpy_begin,
recpy_end): Use functions from py-record-btrace.c and py-record-full.c.
* python/python-internal.h (PyInt_FromSsize_t, PyInt_AsSsize_t):
New definition.
(gdbpy_initialize_btrace): New export.
* python/python.c (_initialize_python): Add gdbpy_initialize_btrace.
Change-Id: I8bd893672ffc7e619cc1386767897249e125973a
This patch adds three new functions to the gdb module in Python:
- start_recording
- stop_recording
- current_recording
start_recording and current_recording return an object of the new type
gdb.Record, which can be used to access the recorded data.
Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com>
gdb/ChangeLog
* Makefile.in (SUBDIR_PYTHON_OBS): Add python/py-record.o.
(SUBDIR_PYTHON_SRCS): Add python/py-record.c.
* python/py-record.c: New file.
* python/python-internal.h (gdbpy_start_recording,
gdbpy_current_recording, gdpy_stop_recording,
gdbpy_initialize_record): New export.
* python/python.c (_initialize_python): Add gdbpy_initialize_record.
(python_GdbMethods): Add gdbpy_start_recording,
gdbpy_current_recording and gdbpy_stop_recording.
Change-Id: I772aa9aa068621443f10a330b11dc7dc9a63face
This patch adds one unit test, which disassemble one instruction for
every gdbarch if available. The test needs one valid instruction of
each gdbarch, and most of them are got from breakpoint instruction.
For the rest gdbarch whose breakpoint instruction isn't a valid
instruction, I copy one instruction from the gas/testsuite/gas/
directory.
I get the valid instruction of most gdbarch except ia64, mep, mips,
tic6x, and xtensa. People familiar with these arch should be easy
to extend the test.
In order to achieve "do the unit test for every gdbarch", I add
selftest-arch.[c,h], so that we can register a function pointer,
which has one argument gdbarch. selftest.c will iterate over all
gdbarches to call the registered function pointer.
gdb:
2017-01-26 Yao Qi <yao.qi@linaro.org>
* Makefile.in (SFILES): Add disasm-selftests.c and
selftest-arch.c.
(COMMON_OBS): Add disasm-selftests.o and selftest-arch.o.
* disasm-selftests.c: New file.
* selftest-arch.c: New file.
* selftest-arch.h: New file.
If I run 'make check-headers', I get these errors,
....
In file included from ../../binutils-gdb/gdb/common/common-defs.h:78:0,
from ../../binutils-gdb/gdb/defs.h:28,
from <command-line>:0:
../../binutils-gdb/gdb/common/common-utils.h:23:18: fatal error: string: No such file or directory
#include <string>
^
because we still parse headers as c file with a c compiler, which is no
longer true after we moved to C++. This patch changes it to use C++
compiler and parse headers as c++ headers.
gdb:
2017-01-13 Yao Qi <yao.qi@linaro.org>
* Makefile.in (checker-headers): Use CXX and CXX_DIALET instead
of CC. Pass "-x c++-header" instead of "-x c".
Commit e379037 (Move gdb_ptrace.h to nat/), so we should update
file name in HFILES_NO_SRCDIR too. Otherwise, 'make tags' complains,
$ make tags
make: *** No rule to make target `gdb_ptrace.h', needed by `TAGS'. Stop.
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* Makefile.in (HFILES_NO_SRCDIR): Replace gdb_ptrace.h
with nat/gdb_ptrace.h.
This has been tested for the n64 and o32 ABIs. Signal frame unwinders for
both ABIs are provided. FreeBSD/mips requires custom linkmap offsets since
it contains an additional l_off member in 'struct link_map' that other
FreeBSD platforms do not have. Support for collecting and supplying
general purpose and floating point register sets are provided. Common
routines for working with native format register sets are exported for
use by the native target.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add mips-fbsd-tdep.o.
(ALLDEPFILES): Add mips-fbsd-tdep.c.
* NEWS: Mention new FreeBSD/mips target.
* configure.tgt: Add mips*-*-freebsd*.
* mips-fbsd-tdep.c: New file.
* mips-fbsd-tdep.h: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Contributors): Add SRI International and University
of Cambridge for FreeBSD/mips.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Since we don't use suffix rules nor implicit rules in gdb, we can
disable them. The advantage is a slightly faster make [1].
Here are some numbers about the speedup. I ran this on my trusty old
Intel Q6600, so the time numbers are probably higher than what you'd get
on any recent hardware. I ran "make" in the gdb/ directory of an
already built repository (configured with --enable-targets=all). I
recorded the time of execution (average of 5). I then ran "make -d" and
recorded the number of printed lines, which gives a rough idea of the
number of operations done.
I compared the following configurations, to see the impact of both the
empty .SUFFIXES target and the empty pattern rules, as well as running
"make -r", which can be considered the "ideal" case.
A - baseline
B - baseline + .SUFFIXES
C - baseline + pattern rules
D - baseline + .SUFFIXES + pattern rules
E - baseline + make -r
config | time (s) | "make -d"
-----------------------------
A | 5.74 | 2396643
B | 1.19 | 298469
C | 2.81 | 1266573
D | 1.13 | 245489
E | 1.01 | 163914
We can see that the empty .SUFFIXES target has a bigger impact than the
empty pattern rules, but still it doesn't hurt to disable the implicit
pattern rules as well.
There are still some mentions of implicit rules I can't get rid of in
the "make -d" output. For example, it's trying to build .c files from
.w files:
Looking for an implicit rule for '/home/simark/src/binutils-gdb/gdb/infrun.c'.
Trying pattern rule with stem 'infrun'.
Trying implicit prerequisite '/home/simark/src/binutils-gdb/gdb/infrun.w'.
and trying to build Makefile.in from a bunch of extensions:
Looking for an implicit rule for 'Makefile.in'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.o'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.c'.
Trying pattern rule with stem 'Makefile.in'.
Trying implicit prerequisite 'Makefile.in.cc'.
... many more ...
If somebody knows how to disable them, we can do it, but at this point
the returns are minimal, so it is not that important.
I verified that both in-tree and out-of-tree builds work.
[1] Switching from explicit rules to pattern rules for files in
subdirectories actually made it slower, so this is kind of a way to
redeem myself. But it the end it's faster than it was previously,
so it was all worth it. :)
gdb/ChangeLog:
* disable-implicit-rules.mk: New file.
* Makefile.in: Include disable-implicit-rules.mk.
* data-directory/Makefile.in: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/ChangeLog:
* Makefile.in: Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
gdb/testsuite/ChangeLog:
* Makefile.in: Include disable-implicit-rules.mk.
This patch fixes a few problems with GDB's time handling.
#1 - It avoids problems with gnulib's C++ namespace support
On MinGW, the struct timeval that should be passed to gnulib's
gettimeofday replacement is incompatible with libiberty's
timeval_sub/timeval_add. That's because gnulib also replaces "struct
timeval" with its own definition, while libiberty expects the
system's.
E.g., in code like this:
gettimeofday (&prompt_ended, NULL);
timeval_sub (&prompt_delta, &prompt_ended, &prompt_started);
timeval_add (&prompt_for_continue_wait_time,
&prompt_for_continue_wait_time, &prompt_delta);
That's currently handled in gdb by not using gnulib's gettimeofday at
all (see common/gdb_sys_time.h), but that #undef hack won't work with
if/when we enable gnulib's C++ namespace support, because that mode
adds compile time warnings for uses of ::gettimeofday, which are hard
errors with -Werror.
#2 - But there's an elephant in the room: gettimeofday is not monotonic...
We're using it to:
a) check how long functions take, for performance analysis
b) compute when in the future to fire events in the event-loop
c) print debug timestamps
But that's exactly what gettimeofday is NOT meant for. Straight from
the man page:
~~~
The time returned by gettimeofday() is affected by
discontinuous jumps in the system time (e.g., if the system
administrator manually changes the system time). If you need a
monotonically increasing clock, see clock_gettime(2).
~~~
std::chrono (part of the C++11 standard library) has a monotonic clock
exactly for such purposes (std::chrono::steady_clock). This commit
switches to use that instead of gettimeofday, fixing all the issues
mentioned above.
gdb/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/run-time-clock.c.
(HFILES_NO_SRCDIR): Add common/run-time-clock.h.
(COMMON_OBS): Add run-time-clock.o.
* common/run-time-clock.c, common/run-time-clock.h: New files.
* defs.h (struct timeval, print_transfer_performance): Delete
declarations.
* event-loop.c (struct gdb_timer) <when>: Now a
std::chrono::steady_clock::time_point.
(create_timer): use std::chrono::steady_clock instead of
gettimeofday. Use new instead of malloc.
(delete_timer): Use delete instead of xfree.
(duration_cast_timeval): New.
(update_wait_timeout): Use std::chrono::steady_clock instead of
gettimeofday.
* maint.c: Include <chrono> instead of "gdb_sys_time.h", <time.h>
and "timeval-utils.h".
(scoped_command_stats::~scoped_command_stats)
(scoped_command_stats::scoped_command_stats): Use
std::chrono::steady_clock instead of gettimeofday. Use
user_cpu_time_clock instead of get_run_time.
* maint.h: Include "run-time-clock.h" and <chrono>.
(scoped_command_stats): <m_start_cpu_time>: Now a
user_cpu_time_clock::time_point.
<m_start_wall_time>: Now a std::chrono::steady_clock::time_point.
* mi/mi-main.c: Include "run-time-clock.h" and <chrono> instead of
"gdb_sys_time.h" and <sys/resource.h>.
(rusage): Delete.
(mi_execute_command): Use new instead of XNEW.
(mi_load_progress): Use std::chrono::steady_clock instead of
gettimeofday.
(timestamp): Rewrite in terms of std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
(timeval_diff): Delete.
(print_diff): Adjust to use std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
* mi/mi-parse.h: Include "run-time-clock.h" and <chrono> instead
of "gdb_sys_time.h".
(struct mi_timestamp): Change fields types to
std::chrono::steady_clock::time_point, user_cpu_time_clock::time
and system_cpu_time_clock::time_point, instead of struct timeval.
* symfile.c: Include <chrono> instead of <time.h> and
"gdb_sys_time.h".
(struct time_range): New.
(generic_load): Use std::chrono::steady_clock instead of
gettimeofday.
(print_transfer_performance): Replace timeval parameters with a
std::chrono::steady_clock::duration parameter. Adjust.
* utils.c: Include <chrono> instead of "timeval-utils.h",
"gdb_sys_time.h", and <time.h>.
(prompt_for_continue_wait_time): Now a
std::chrono::steady_clock::duration.
(defaulted_query, prompt_for_continue): Use
std::chrono::steady_clock instead of
gettimeofday/timeval_sub/timeval_add.
(reset_prompt_for_continue_wait_time): Use
std::chrono::steady_clock::duration instead of struct timeval.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
(vfprintf_unfiltered): Use std::chrono::steady_clock instead of
gettimeofday. Use std::string. Use '.' instead of ':'.
* utils.h: Include <chrono>.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
gdb/gdbserver/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* debug.c: Include <chrono> instead of "gdb_sys_time.h".
(debug_vprintf): Use std::chrono::steady_clock instead of
gettimeofday. Use '.' instead of ':'.
* tracepoint.c: Include <chrono> instead of "gdb_sys_time.h".
(get_timestamp): Use std::chrono::steady_clock instead of
gettimeofday.
Mostly some whitespace changes to make things a bit more consistent.
gdb/ChangeLog:
* Makefile.in: Fix whitespace formatting.
gdb/gdbserver/ChangeLog:
* Makefile.in: Fix whitespace formatting.
I find the big file lists in the Makefiles a bit ugly and not very
practical. Since there are multiple filenames on each line (as much as
fits in 80 columns), it's not easy to add, remove or change a name in
the middle. As a result, we have a mix of long and short lines in no
particular order (ALL_TARGET_OBS is a good example).
I therefore suggest flattening the lists (one name per line) and keeping
them in alphabetical order. The diffs will be much clearer and merge
conflicts will be easier to resolve.
A nice (IMO) side-effect I observed is that the files are compiled
alphabetically by make, so it gives a rough idea of the progress of the
build.
I added a comment in gdb/Makefile.in to mention to keep the file lists
ordered, and gave the general guidelines on what order to respect. I
added a comment in other Makefiles which refers to gdb/Makefile.in, to
avoid duplication.
Running the patch through the buildbot found that gdb.base/default.exp
started to fail. The languages in the error message shown when typing
"set language" have changed order. We could probably improve gdb so
that it prints them in a stable order, regardless of the order of the
object list passed to the linked, but just fixing the test is easier for
now.
New in v2:
- Change ordering style, directories go at the end.
- Cleanup gdbserver's and data-directory's Makefile as well.
- Add comments at top of Makefiles about the ordering.
- Remove wrong trailing backslahes.
- Fix test gdb.base/default.exp.
gdb/ChangeLog:
* Makefile.in: Add comment about file lists ordering.
(SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_MI_OBS, SUBDIR_MI_SRCS,
SUBDIR_TUI_OBS, SUBDIR_TUI_SRCS, SUBDIR_GCC_COMPILE_OBS,
SUBDIR_GCC_COMPILE_SRCS, SUBDIR_GUILE_OBS, SUBDIR_GUILE_SRCS,
SUBDIR_PYTHON_OBS, SUBDIR_PYTHON_SRCS, SUBDIR_GDBTK_OBS,
SUBDIR_GDBTK_SRCS, XMLFILES, REMOTE_OBS, ALL_64_TARGET_OBS,
ALL_TARGET_OBS, SFILES, HFILES_NO_SRCDIR, HFILES_WITH_SRCDIR,
COMMON_OBS, YYFILES, YYOBJ, generated_files, ALLDEPFILES):
Flatten list and order alphabetically.
* data-directory/Makefile.in: Add comment about file lists
ordering.
(GEN_SYSCALLS_FILES, PYTHON_FILE_LIST): Flatten list and order
alphabetically.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES, OBS): Flatten list and order
alphabetically.
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Fix output of "set language".
A little oversight from my part, it caused the Makefile not to track
the dependencies from mi/*.c files.
gdb/ChangeLog:
* Makefile.in (%o: $(srcdir)/mi/%.c): Add missing POSTCOMPILE
step.
When adding a .c file in subdirectory (e.g. mi/), the current practice
is to add an explicit rule, such as:
mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
$(COMPILE) $(srcdir)/mi/mi-cmd-break.c
$(POSTCOMPILE)
I find it a bit verbose and cumbersome. Since we now require GNU make,
we can change those rules with pattern rules, one for each subdirectory.
For example, the following rule works for all files under mi:
%.o: $(srcdir)/mi/%.c
$(COMPILE) $<
$(POSTCOMPILE)
Those pattern rules assume that the source and target files have the
same stem (foo.c and foo.o). In one case, common-agent.o is generated
from common/agent.c, to avoid a conflict with the agent.o in gdb/. In
this case, I kept the explicit rule, which takes precedence over the
pattern rule. We could also rename common/agent.c to
common/common-agent.c to get rid of the special case and still avoid the
clash, as it is done with common/common-regcache.c, for example.
This strategy was the least intrusive I found, as it only requires
changing the rules, not the target names.
I also considered two other solutions, which I did not like because I
would have had to change target names a bit everywhere.
- Replicate the source directory structure in the build directory,
which would generate common/agent.o from common/agent.c. However,
something was not right with the dependency tracking (the .deps
directory). It's probably not hard to fix, but I did not
investigate further.
- Name the object files after the directory they are in, so that
common/agent.c would generate common_agent.c.
GDBserver can benefit from the same treatment, but I'll do it in another
patch.
Built-tested with --enable-targets=all.
New in v2:
- Regroup pattern rules for .c -> .o compilation in a single place.
- Add comment about common-agent.o.
gdb/ChangeLog:
(PYTHON_CFLAGS): Move up.
(%.o: $(srcdir)/arch/%.c): New rule.
(%.o: $(srcdir)/cli/%.c): New rule.
(%.o: $(srcdir)/common/%.c): New rule.
(%.o: $(srcdir)/compile/%.c): New rule.
(%.o: $(srcdir)/gdbtk/generic/%.c): New rule.
(%.o: $(srcdir)/guile/%.c): New rule.
(%.o: $(srcdir)/mi/%.c): New rule.
(%.o: $(srcdir)/nat/%.c): New rule.
(%.o: $(srcdir)/python/%.c): New rule.
(%.o: $(srcdir)/target/%.c): New rule.
(%.o: $(srcdir)/tui/%.c): New rule.
(cli-cmds.o): Remove.
(cli-decode.o): Likewise.
(cli-dump.o): Likewise.
(cli-interp.o): Likewise.
(cli-logging.o): Likewise.
(cli-script.o): Likewise.
(cli-setshow.o): Likewise.
(cli-utils.o): Likewise.
(compile.o): Likewise.
(compile-c-types.o): Likewise.
(compile-c-symbols.o): Likewise.
(compile-object-load.o): Likewise.
(compile-object-run.o): Likewise.
(compile-loc2c.o): Likewise.
(compile-c-support.o): Likewise.
(gdbtk.o): Likewise.
(gdbtk-bp.o): Likewise.
(gdbtk-cmds.o): Likewise.
(gdbtk-hooks.o): Likewise.
(gdbtk-interp.o): Likewise.
(gdbtk-main.o): Likewise.
(gdbtk-register.o): Likewise.
(gdbtk-stack.o): Likewise.
(gdbtk-varobj.o): Likewise.
(gdbtk-wrapper.o): Likewise.
(mi-cmd-break.o): Likewise.
(mi-cmd-catch.o): Likewise.
(mi-cmd-disas.o): Likewise.
(mi-cmd-env.o): Likewise.
(mi-cmd-file.o): Likewise.
(mi-cmd-info.o): Likewise.
(mi-cmds.o): Likewise.
(mi-cmd-stack.o): Likewise.
(mi-cmd-target.o): Likewise.
(mi-cmd-var.o): Likewise.
(mi-console.o): Likewise.
(mi-getopt.o): Likewise.
(mi-interp.o): Likewise.
(mi-main.o): Likewise.
(mi-out.o): Likewise.
(mi-parse.o): Likewise.
(mi-symbol-cmds.o): Likewise.
(mi-common.o): Likewise.
(signals.o): Likewise.
(common-utils.o): Likewise.
(gdb_vecs.o): Likewise.
(xml-utils.o): Likewise.
(ptid.o): Likewise.
(buffer.o): Likewise.
(filestuff.o): Likewise.
(format.o): Likewise.
(vec.o): Likewise.
(print-utils.o): Likewise.
(rsp-low.o): Likewise.
(errors.o): Likewise.
(common-debug.o): Likewise.
(cleanups.o): Likewise.
(common-exceptions.o
(posix-strerror.o): Likewise.
(mingw-strerror.o): Likewise.
(btrace-common.o): Likewise.
(fileio.o): Likewise.
(common-regcache.o): Likewise.
(signals-state-save-restore.o): Likewise.
(new-op.o): Likewise.
(waitstatus.o): Likewise.
(arm.o): Likewise.
(arm-linux.o): Likewise.
(arm-get-next-pcs.o): Likewise.
(x86-dregs.o): Likewise.
(linux-btrace.o): Likewise.
(linux-osdata.o): Likewise.
(linux-procfs.o): Likewise.
(linux-ptrace.o): Likewise.
(linux-waitpid.o): Likewise.
(mips-linux-watch.o): Likewise.
(ppc-linux.o): Likewise.
(linux-personality.o): Likewise.
(x86-linux.o): Likewise.
(x86-linux-dregs.o): Likewise.
(amd64-linux-siginfo.o): Likewise.
(linux-namespaces.o): Likewise.
(aarch64-linux-hw-point.o): Likewise.
(aarch64-linux.o): Likewise.
(aarch64-insn.o): Likewise.
(tui.o): Likewise.
(tui-command.o): Likewise.
(tui-data.o): Likewise.
(tui-disasm.o): Likewise.
(tui-file.o): Likewise.
(tui-hooks.o): Likewise.
(tui-interp.o): Likewise.
(tui-io.o): Likewise.
(tui-layout.o): Likewise.
(tui-out.o): Likewise.
(tui-regs.o): Likewise.
(tui-source.o): Likewise.
(tui-stack.o): Likewise.
(tui-win.o): Likewise.
(tui-windata.o): Likewise.
(tui-wingeneral.o): Likewise.
(tui-winsource.o): Likewise.
(guile.o): Likewise.
(scm-arch.o): Likewise.
(scm-auto-load.o): Likewise.
(scm-block.o): Likewise.
(scm-breakpoint.o): Likewise.
(scm-cmd.o): Likewise.
(scm-disasm.o): Likewise.
(scm-exception.o): Likewise.
(scm-frame.o): Likewise.
(scm-gsmob.o): Likewise.
(scm-iterator.o): Likewise.
(scm-lazy-string.o): Likewise.
(scm-math.o): Likewise.
(scm-objfile.o): Likewise.
(scm-param.o): Likewise.
(scm-ports.o): Likewise.
(scm-pretty-print.o): Likewise.
(scm-progspace.o): Likewise.
(scm-safe-call.o): Likewise.
(scm-string.o): Likewise.
(scm-symbol.o): Likewise.
(scm-symtab.o): Likewise.
(scm-type.o): Likewise.
(scm-utils.o): Likewise.
(scm-value.o): Likewise.
(python.o): Likewise.
(py-arch.o): Likewise.
(py-auto-load.o): Likewise.
(py-block.o): Likewise.
(py-bpevent.o): Likewise.
(py-breakpoint.o): Likewise.
(py-cmd.o): Likewise.
(py-continueevent.o): Likewise.
(py-xmethods.o): Likewise.
(py-event.o): Likewise.
(py-evtregistry.o): Likewise.
(py-evts.o): Likewise.
(py-exitedevent.o): Likewise.
(py-finishbreakpoint.o): Likewise.
(py-frame.o): Likewise.
(py-framefilter.o): Likewise.
(py-function.o): Likewise.
(py-gdb-readline.o): Likewise.
(py-inferior.o): Likewise.
(py-infevents.o): Likewise.
(py-infthread.o): Likewise.
(py-lazy-string.o): Likewise.
(py-linetable.o): Likewise.
(py-newobjfileevent.o): Likewise.
(py-objfile.o): Likewise.
(py-param.o): Likewise.
(py-prettyprint.o): Likewise.
(py-progspace.o): Likewise.
(py-signalevent.o): Likewise.
(py-stopevent.o): Likewise.
(py-symbol.o): Likewise.
(py-symtab.o): Likewise.
(py-threadevent.o): Likewise.
(py-type.o): Likewise.
(py-unwind.o): Likewise.
(py-utils.o): Likewise.
(py-value.o): Likewise.
(py-varobj.o): Likewise.
As mentioned here [1], suffix rules are obsolete and have been
superseeded with pattern rules. People (myself included, before writing
this patch) are more likely to know what pattern rules are than suffix
rules.
AFAIK, .SUFFIXES targets are only used for those rules, and can be
removed as well.
New in v2:
- Replace rule in gdbserver/Makefile.in as well.
[1] https://www.gnu.org/software/make/manual/html_node/Suffix-Rules.html
gdb/ChangeLog:
* Makefile.in (.c.o): Replace rule with ...
(%.o: %.c): ... this one.
(.po.gmo): Replace rule with ...
(%.gmo: %.po): ... this one.
(.po.pox): Replace rule with ...
(%.pox: %.po): ... this one.
(.y.c): Replace rule with ...
(%.c: %.y): ... this one.
(.l.c): Replace rule with ...
(%.c: %.l): ... this one.
(.SUFFIXES): Remove all instances.
gdb/gdbserver/ChangeLog:
* Makefile.in (.c.o): Replace rule with ...
(%.o: %.c): ... this one.
Since GNU make is now required to build GDB, we can remove everything
that checks whether the current make implemention is the GNU one or
not. I simply removed the @GMAKE_TRUE@ prefixes and removed the whole
lines that were prefixed with @GMAKE_FALSE@.
I removed the code in the configure scripts that set those variables.
I also removed the following bits from the configure scripts:
AC_CHECK_PROGS(MAKE, make): GNU make already defines a MAKE variable
internally to be used when invoking Makefiles recursively. I don't see
this variable being used anywhere else (in scripts for example), so I
think it's safe for removal.
AC_PROG_MAKE_SET: This macro defines a SET_MAKE output variable, which
is meant to be used in Makefiles to define the MAKE variable when
using an implementation of make that doesn't already define it.
Since we are now requiring GNU make, we don't need it anymore.
Plus, I don't see SET_MAKE being used anywhere, so I don't think it
was actually doing anything...
gdb/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
gdb/gdbserver/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
gdb/testsuite/ChangeLog:
* Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
make.
* configure.ac: Remove checks for the make program.
* configure: Re-generate.
This introduces the string_printf function. Like asprintf, but
returns a std::string.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_OBS): Add utils-selftests.o.
* common/common-utils.c (string_printf): New function.
* common/common-utils.h: Include <string>.
(string_printf): Declare.
* utils-selftests.c: New file.
As we require c++11, GDB fails to build if bison is not new enough.
I see the following error on the system (fedora 19) that bison is
2.6.4,
g++ -std=gnu++11 .... \
-c -o ada-exp.o -MT ada-exp.o -MMD -MP -MF .deps/ada-exp.Tpo 'if test -f ada-exp.c; then echo ada-exp.c; else echo ../../binutils-gdb/gdb/ada-exp.c; fi`
In file included from ../../binutils-gdb/gdb/ada-exp.y:731:0:
ada-lex.c:113:0: error: "YY_NULL" redefined [-Werror]
#define YY_NULL 0
^
ada-exp.c:158:0: note: this is the location of the previous definition
# define YY_NULL nullptr
^
cc1plus: all warnings being treated as errors
make: *** [ada-exp.o] Error 1
Both ada-exp.c and ada-lex.c has macro YY_NULL, like this,
$ cat 1.c
# ifndef YY_NULL
# if defined __cplusplus && 201103L <= __cplusplus
# define YY_NULL nullptr
# else
# define YY_NULL 0
# endif
# endif
#define YY_NULL 0
as we can see, YY_NULL is defined differently (nullptr vs 0)
$ g++ -std=c++11 -Wall 1.c -c
1.c:9:0: warning: "YY_NULL" redefined
#define YY_NULL 0
^
1.c:3:0: note: this is the location of the previous definition
# define YY_NULL nullptr
^
$ g++ -Wall 1.c -c
bison renames YY_NULL to YY_NULLPTR in 2013 Nov,
https://lists.gnu.org/archive/html/bison-patches/2013-11/msg00002.html
and bison released later than 2013 Nov have this patch. Bison 3.0.2,
released on 2013 Dec, is OK.
The fix is to replace YY_NULL with YY_NULLPTR via sed. With old bison,
YY_NULL becomes YY_NULLPTR; with new bison, YY_NULLPTR becomes
YY_NULLPTRPTR,
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
* Makefile.in (.y.c): Replace YY_NULL with YY_NULLPTR.
Use AX_CXX_COMPILE_STDCXX to detect if the compiler supports C++11,
and if -std=xxx switches are necessary to enable C++11.
We need to tweak AX_CXX_COMPILE_STDCXX a bit though. Pristine
upstream AX_CXX_COMPILE_STDCXX appends -std=gnu++11 to CXX directly.
That doesn't work for us, because the top level Makefile passes CXX
down to subdirs, and that overrides whatever gdb/Makefile may set CXX
to. The result would be that a make invocation from the build/gdb/
directory would use "g++ -std=gnu++11" as expected, while a make
invocation at the top level would not.
So instead of having AX_CXX_COMPILE_STDCXX set CXX directly, tweak it
to AC_SUBST a separate variable -- CXX_DIALECT -- and use '$(CXX)
(CXX_DIALECT)' to compile/link.
Confirmed that this enables C++11 starting with gcc 4.8, the first gcc
release with full C++11 support.
Also confirmed that configure errors out gracefully with older GCC
releases:
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features by default... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++0x... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++0x... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with +std=c++11... no
checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -h std=c++11... no
configure: error: *** A compiler with support for C++11 language features is required.
Makefile:9451: recipe for target 'configure-gdb' failed
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory '/home/pedro/brno/pedro/gdb/mygit/cxx-convertion/build-gcc-4.7'
If we need to revert back to making C++11 optional, all that's
necessary is to change the "mandatory" to "optional" in configure.ac
and regenerate configure (both gdb and gdbserver).
gdb/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
(COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
(FLAGS_TO_PASS): Pass CXX_DIALECT.
* acinclude.m4: Include ax_cxx_compile_stdcxx.m4.
* ax_cxx_compile_stdcxx.m4: Add FSF copyright header. Set and
AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP.
* configure.ac: Call AX_CXX_COMPILE_STDCXX.
* config.in: Regenerate.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
(COMPILE.pre, CC_LD): Append $(CXX_DIALECT).
* acinclude.m4: Include ../ax_cxx_compile_stdcxx.m4.
* configure.ac: Call AX_CXX_COMPILE_STDCXX.
* config.in: Regenerate.
* configure: Regenerate.
If xmalloc fails allocating memory, usually because something tried a
huge allocation, like xmalloc(-1) or some such, GDB asks the user what
to do:
.../src/gdb/utils.c:1079: internal-error: virtual memory exhausted.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
If the user says "n", that throws a QUIT exception, which is caught by
one of the multiple CATCH(RETURN_MASK_ALL) blocks somewhere up the
stack.
The default implementations of operator new / operator new[] call
malloc directly, and on memory allocation failure throw
std::bad_alloc. Currently, if that happens, since nothing catches it,
the exception escapes out of main, and GDB aborts from unhandled
exception.
This patch replaces the default operator new variants with versions
that, just like xmalloc:
#1 - Raise an internal-error on memory allocation failure.
#2 - Throw a QUIT gdb_exception, so that the exact same CATCH blocks
continue handling memory allocation problems.
A minor complication of #2 is that operator new can _only_ throw
std::bad_alloc, or something that extends it:
void* operator new (std::size_t size) throw (std::bad_alloc);
That means that if we let a gdb QUIT exception escape from within
operator new, the C++ runtime aborts due to unexpected exception
thrown.
So to bridge the gap, this patch adds a new gdb_quit_bad_alloc
exception type that inherits both std::bad_alloc and gdb_exception,
and throws _that_.
If we decide that we should be catching memory allocation errors in
fewer places than all the places we currently catch them (everywhere
we use RETURN_MASK_ALL currently), then we could change operator new
to throw plain std::bad_alloc then. But I'm considering such a change
as separate matter from this one -- it'd make sense to do the same to
xmalloc at the same time, for instance.
Meanwhile, this allows using new/new[] instead of xmalloc/XNEW/etc.
without losing the "virtual memory exhausted" internal-error
safeguard.
Tested on x86_64 Fedora 23.
gdb/ChangeLog:
2016-09-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/new-op.c.
(COMMON_OBS): Add common/new-op.o.
(new-op.o): New rule.
* common/common-exceptions.h: Include <new>.
(struct gdb_quit_bad_alloc): New type.
* common/new-op.c: New file.
gdb/gdbserver/ChangeLog:
2016-09-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/new-op.c.
(OBS): Add common/new-op.o.
(new-op.o): New rule.
ARC is a family of licensable processors developed by Synopsys.
This is an initial patch that doesn't yet support some of the features, that
are already available in Synopsys' fork of GDB, namely:
* longjmp support
* signal frame handling
* prologue analysis
* Linux targets support
* native Linux support
ARC cores are configurable and extensible, which means from debugger
perspective that some registers and debug capabilities are optional, therefore
it is up to the GDB stub to determine exact list of register available on
target and supply it to GDB via XML target descriptions. List of registers
that is known to GDB and is required is intentionally kept small to simplify
requirements to GDB stub and implementation of a GDB client.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add arc-tdep.o.
(HFILES_NO_SRCDIR): Add arc-tdep.h.
(ALLDEPFILES): Add arc-tdep.c.
* NEWS: Mention new ARC port.
* configure.tgt: Add ARC.
* arc-tdep.c: New file.
* arc-tdep.h: New file.
* features/Makefile (XMLTOC): Add arc-v2.xml and arc-arcompact.xml.
* features/arc-v2.xml: New file.
* features/arc-v2.c: New file (generated).
* features/arc-arcompact.xml: New file.
* features/arc-arcompact.c: New file (generated).
gdb/doc/ChangeLog:
* gdb.texinfo (Embedded Processors): Document ARC.
(Synopsys ARC): New section.
(Standard Target Features): Document ARC features.
(ARC Features): New section.
gdb/testsuite/ChangeLog:
* gdb.xml/tdesc-regs.exp: set core-regs for arc*-*-elf32.
This removes all support for building gdb & gdbserver with a C
compiler from gdb & gdbserver's build machinery.
gdb/ChangeLog:
2016-09-05 Pedro Alves <palves@redhat.com>
* NEWS: Mention that a C++ compiler is now required.
* Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
(COMPILE.pre, CC_LD): Use CXX directly.
(INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
* acinclude.m4: Don't include build-with-cxx.m4.
* build-with-cxx.m4: Delete file.
* configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
* warning.m4: Assume $enable_build_with_cxx is yes.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2016-09-05 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
(COMPILE.pre, CC_LD): Use CXX directly.
(INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
* acinclude.m4: Don't include build-with-cxx.m4.
* configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
* configure: Regenerate.
gdb's (or gdbserver's) own signal handling should not interfere with
the signal dispositions their spawned children inherit. However, it
currently does. For example, some paths in gdb cause SIGPIPE to be
set to SIG_IGN, and as consequence, the child starts with SIGPIPE to
set to SIG_IGN too, even though gdb was started with SIGPIPE set to
SIG_DFL.
This is because the exec family of functions does not reset the signal
disposition of signals that are set to SIG_IGN:
http://pubs.opengroup.org/onlinepubs/7908799/xsh/execve.html
Signals set to the default action (SIG_DFL) in the calling process
image are set to the default action in the new process
image. Signals set to be ignored (SIG_IGN) by the calling process
image are set to be ignored by the new process image. Signals set to
be caught by the calling process image are set to the default action
in the new process image (see <signal.h>).
And neither does it reset signal masks or flags.
In order to be transparent, when spawning new child processes to debug
(with "run", etc.), reset signal actions and mask back to what was
originally inherited from gdb/gdbserver's parent, just before execing
the target program to debug.
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (SFILES): Add
common/signals-state-save-restore.c.
(HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h.
(COMMON_OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* configure: Regenerate.
* fork-child.c: Include "signals-state-save-restore.h".
(fork_inferior): Call restore_original_signals_state.
* main.c: Include "signals-state-save-restore.h".
(captured_main): Call save_original_signals_state.
* common/common.m4: Add sigaction to AC_CHECK_FUNCS checks.
* common/signals-state-save-restore.c: New file.
* common/signals-state-save-restore.h: New file.
gdb/gdbserver/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* Makefile.in (OBS): Add signals-state-save-restore.o.
(signals-state-save-restore.o): New rule.
* config.in: Regenerate.
* configure: Regenerate.
* linux-low.c: Include "signals-state-save-restore.h".
(linux_create_inferior): Call
restore_original_signals_state.
* server.c: Include "dispositions-save-restore.h".
(captured_main): Call save_original_signals_state.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR gdb/18653
* gdb.base/signals-state-child.c: New file.
* gdb.base/signals-state-child.exp: New file.
* gdb.gdb/selftest.exp (do_steps_and_nexts): Add new pattern.
Move the debug register support code from amd64bsd-nat.c and
i386bsd-nat.c into a shared x86bsd-nat.c.
Instead of setting up x86_dr_low in amd64fbsd-nat.c and
i386fbsd-nat.c, add a x86bsd_target function that creates a new target
that inherits from inf_ptrace and sets up x86 debug registers if
supported. In addition to initializing x86_dr_low, the x86bsd target
installs a custom mourn_inferior target operation to clean up the
x86 debug register state. Previously this was only done on amd64.
Now it will be done for both i386 and amd64. The i386bsd_target and
amd64bsd_target functions create targets that inherit from x86bsd
rather than inf_ptrace.
gdb/ChangeLog:
* Makefile.in [HFILES_NO_SRCDIR]: Replace 'amd64bsd-nat.h' with
'x86bsd-nat.h'.
* amd64bsd-nat.c: Include 'x86bsd-nat.h' instead of
'amd64bsd-nat.h'.
(amd64bsd_xsave_len): Rename and move to x86bsd-nat.c.
(amd64bsd_fetch_inferior_registers): Replace 'amd64bsd_xsave_len'
with 'x86bsd_xsave_len'.
(amd64bsd_store_inferior_registers): Likewise.
(amd64bsd_target): Inherit from x86bsd_target.
(amd64bsd_dr_get): Rename and move to x86bsd-nat.c.
(amd64bsd_dr_set): Likewise.
(amd64bsd_dr_set_control): Likewise.
(amd64bsd_dr_set_addr): Likewise.
(amd64bsd_dr_get_addr): Likewise.
(amd64bsd_dr_get_status): Likewise.
(amd64bsd_dr_get_control): Likewise.
* amd64fbsd-nat.c: Include 'x86bsd-nat.h' instead of
'amd64bsd-nat.h'.
(super_mourn_inferior): Move to x86bsd-nat.c.
(amd64fbsd_mourn_inferior): Rename and move to x86bsd-nat.c.
(amd64fbsd_read_description): Replace 'amd64bsd_xsave_len' with
'x86bsd_xsave_len'.
(_initialize_amd64fbsd_nat): Remove x86 watchpoint setup and
mourn_inferior' target op.
* config/i386/fbsd.mh (NATDEPFILES): Add x86bsd-nat.o.
* config/i386/fbsd64.mh: Likewise.
* config/i386/nbsd64.mh: Likewise.
* config/i386/nbsdelf.mh: Likewise.
* config/i386/obsd.mh: Likewise.
* config/i386/obsd64.mh: Likewise.
* i386bsd-nat.c: Include 'x86bsd-nat.h'.
(i386bsd_xsave_len): Rename and move to x86bsd-nat.c.
(i386bsd_fetch_inferior_registers): Replace 'i386bsd_xsave_len'
with 'x86bsd_xsave_len'.
(i386bsd_store_inferior_registers): Likewise.
(i386bsd_target): Inherit from x86bsd_target.
(i386bsd_dr_get): Rename and move to x86bsd-nat.c.
(i386bsd_dr_set): Likewise.
(i386bsd_dr_set_control): Likewise.
(i386bsd_dr_set_addr): Likewise.
(i386bsd_dr_get_addr): Likewise.
(i386bsd_dr_get_status): Likewise.
(i386bsd_dr_get_control): Likewise.
* i386bsd-nat.h (i386bsd_xsave_len): Remove.
(i386bsd_dr_set_control): Remove.
(i386bsd_dr_set_addr): Remove.
(i386bsd_dr_get_addr): Remove.
(i386bsd_dr_get_status): Remove.
(i386bsd_dr_get_control): Remove.
* i386fbsd-nat.c: Include 'x86bsd-nat.h'.
(i386fbsd_read_description): Replace 'i386bsd_xsave_len' with
'x86bsd_xsave_len'.
(_initialize_i386fbsd_nat): Remove x86 watchpoint setup and
mourn_inferior' target op.
* x86bsd-nat.c: New file.
* x86bsd-nat.h: New file.
I noticed that the rust-exp handling in the Makefile differed from
that of other .y files. I believe I noticed this by seeing a stray
"rm" in the build log.
This patch changes the Makefile to bring the rust-exp handling in line
with that of other .y files.
2016-06-10 Tom Tromey <tom@tromey.com>
* Makefile.in (COMMON_OBS): Remove rust-exp.o.
(YYFILES): Add rust-exp.c.
(YYOBJ): Add rust-exp.o.
(local-maintainer-clean): Remove rust-exp.c.
I wanted to unit test the Rust lexer, so I added a simple unit testing
command to gdb.
The intent is that self tests will only be compiled into gdb in
development mode. In release mode they simply won't exist. So, this
exposes $development to C code as GDB_SELF_TEST.
In development mode, test functions are registered with the self test
module. A test function is just a function that does some checks, and
throws an exception on failure.
Then this adds a new "maint selftest" command which invokes the test
functions, and a new dejagnu test case that invokes it.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add "maint selftest" entry.
* selftest.h: New file.
* selftest.c: New file.
* maint.c: Include selftest.h.
(maintenance_selftest): New function.
(_initialize_maint_cmds): Add "maint selftest" command.
* configure.ac (GDB_SELF_TEST): Maybe define.
* config.in, configure: Rebuild.
* Makefile.in (SFILES): Add selftest.c.
(COMMON_OBS): Add selftest.o.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document "maint selftest".
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.gdb/unittest.exp: New file.
gdb's Makefile.in does not currently scan .y files to add global
initializers from these files to init.c. However, at least ada-exp.y
tries to use this feature.
This patch fixes the problem.
2016-05-17 Tom Tromey <tom@tromey.com>
* Makefile.in (init.c): Search .y files for initialization
functions.
This patch adds a new "event" struct serial type, that is an
abstraction specifically for waking up blocking waits/selects,
implemented on top of a pipe on POSIX, and on top of a native Windows
event (CreateEvent, etc.) on Windows.
This will be used to plug signal handler / mainline code races.
For example, GDB can indefinitely delay handling a quit request if the
user presses Ctrl-C between the last QUIT call and the next (blocking)
gdb_select call in the event loop:
QUIT;
<<< press ctrl-c here and end up blocked in gdb_select
indefinitely.
gdb_select (...); // whoops, SIGINT was already handled, no EINTR.
A global alone (either the quit flag, or the "ready" flag of the async
signal handlers in the event loop) is not sufficient.
To plug races such as these on POSIX systems, we have to register some
waitable file descriptor in the set of files gdb_select waits on, and
write to it from the signal handler. This is classically a pipe, and
the pattern called the self-pipe trick. On Linux, it could be a more
efficient eventfd instead, but I'm sticking with a pipe for
simplifity, as we need it for portability anyway.
(Alternatively, we could use pselect/ppoll, and block signals until
the pselect. The latter is not a design I think GDB could use,
because we want the QUIT macro to be super cheap, as it is used in
loops. Plus, Windows.)
This is a "struct serial" because Windows's gdb_select relies on that.
Windows's gdb_select, our "select" replacement, knows how to wait on
all kinds of handles (regular files, pipes, sockets, console, etc.)
unlike the native Windows "select" function, which can only wait on
sockets. Each file descriptor for a "serial" type that is not
normally waitable with WaitForMultipleObjects must have a
corresponding struct serial instance. gdb_select then internally
looks up the struct serial instance that wraps each file descriptor,
and asks it for the corresponding Windows waitable handle.
We could use serial_pipe() to create a "struct serial"-wrapped pipe
that is usable everywhere, including Windows. That's what currently
python/python.c uses for cross-thread posting of events.
However, serial_write and serial_readchar are not designed to be
async-signal-safe on POSIX hosts. It's easier to bypass those when
setting/clearing the event source.
And writing and a serial pipe is a bit heavy weight on Windows.
gdb_select requires an extra thread to wait on the pipe and several
Windows events, when a single manual-reset Windows event, with no
extra thread is sufficient.
The intended usage is simply:
- Call make_serial_event to create a serial event object.
- From the signal handler call serial_event_set to set the event.
- From mainline code, have select/poll wait for serial_event_fd(), in
addition to whatever other files you're about to wait for.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add ser-event.c.
(HFILES_NO_SRCDIR): Add ser-event.h.
(COMMON_OBS): Add ser-event.o.
* ser-event.c, ser-event.h: New files.
* serial.c (new_serial): New function, factored out from
(serial_fdopen_ops): ... this.
(serial_open_ops_1): New function, factored out from
(serial_open): ... this.
(serial_open_ops): New function.
* serial.h (struct serial): Forware declare.
(serial_open_ops): New declaration.
Simon Marchi
Tom Tromey
Philippe Waroquiers
Sergio Durigan Junior
Alan Hayward
Pedro Franco de Carvalho
John Reiser
Pedro Alves
Markus Metzger
Simon Marchi
Andrew Burgess
Yao Qi
Philipp Rudo
Joel Brobecker
Ulrich Weigand
Mike Gulick
John Baldwin
Walfred Tedeschi
Tim Wiederhake
Anton Kolesov
Yan-Ting Lin