Ian Lance Taylor
7fcd3aa988
* object.cc (Sized_relobj::do_add_symbols): Always pass
...
local_symbol_count_ to add_from_relobj.
2008-04-19 19:34:41 +00:00
Ian Lance Taylor
4c94d6ae7b
* testsuite/Makefile.am (many_sections_check.h): Only check one in
...
every thousand variables.
* testsuite/Makefile.in: Rebuild.
2008-04-19 19:15:36 +00:00
Ian Lance Taylor
fa29711731
* elfcpp_file.h (class Elf_file): Add large_shndx_offset_ field.
...
(Elf_file::large_shndx_offset): New function.
(Elf_file::construct): Initialize large_shndx_offset_.
(Elf_File::initialize_shnum): If necessary, adjust shstrndx_ and
set large_shndx_offset_.
2008-04-19 18:33:19 +00:00
Ian Lance Taylor
d491d34e93
* object.cc (Xindex::initialize_symtab_xindex): New function.
...
(Xindex::read_symtab_xindex): New function.
(Xindex::sym_xindex_to_shndx): New function.
(Sized_relobj::find_symtab): Pick up SHT_SYMTAB_SHNDX section if
available.
(Sized_relobj::do_initialize_xindex): New function.
(Sized_relobj::do_read_symbols): Adjust section links.
(Sized_relobj::symbol_section_and_value): Add is_ordinary
parameter. Change all callers.
(Sized_relobj::include_section_group): Adjust section links and
symbol section indexes.
(Sized_relobj::do_layout): Adjust section links.
(Sized_relobj::do_count_local_symbols): Adjust section links and
symbol section indexes.
(Sized_relobj::do_finalize_local_symbols): Distinguish between
ordinary and special symbols.
(Sized_relobj::write_local_symbols): Add symtab_xindex and
dynsym_xindex parameters. Change all callers. Adjust section
links. Use SHN_XINDEX when needed.
(Sized_relobj::get_symbol_location_info): Adjust section links.
Don't get fooled by special symbols.
* object.h (class Xindex): Define.
(class Object): Add xindex_ parameter. Declare virtual functoin
do_initialize_xindex.
(Object::adjust_sym_shndx): New function.
(Object::set_xindex): New protected function.
(class Symbol_value): Add is_ordinary_shndx_ field.
(Symbol_value::Symbol_value): Initialize is_ordinary_shndx_.
(Symbol_value::value): Assert ordinary section.
(Symbol_value::initialize_input_to_output_map): Likewise.
(Symbol_value::set_input_shndx): Add is_ordinary parameter.
Change all callers.
(Symbol_value::input_shndx): Add is_ordinary parameter. Change
all callers.
(class Sized_relobj): Update declarations.
(Sized_relobj::local_symbol_input_shndx): Add is_ordinary
parameter. Change all callers.
(Sized_relobj::adjust_shndx): New function.
* dynobj.cc (Sized_dynobj::Sized_dynobj): Initialize dynsym_shndx_
field.
(Sized_dynobj::find_dynsym_sections): Remove pdynsym_shndx
parameter. Change all callers. Pick up SHT_DYNSYM_SHNDX section
for SHT_DYNSYM section if available. Set dynsym_shndx_ field.
(Sized_dynobj::read_dynsym_section): Adjust section links.
(Sized_dynobj::read_dynamic): Likewise.
(Sized_dynobj::do_read_symbols): Use dynsym_shndx_ field. Adjust
section links.
(Sized_dynobj::do_initialize_xindex): New function.
* dynobj.h (class Sized_dynobj): Add dynsym_shndx_ field. Declare
do_initialize_xindex.
(Sized_dynobj::adjust_shndx): New function.
* layout.cc (Layout::Layout): Initialize symtab_xindex_ and
dynsym_xindex_ fields.
(Layout::finalize): Add a call to set_section_indexes before
creating the symtab sections.
(Layout::set_section_indexes): Don't do anything if the section
already has a section index.
(Layout::create_symtab_sections): Add shnum parameter. Change
caller. Create .symtab_shndx section if needed.
(Layout::create_shdrs): Add shstrtab_section parameter. Change
caller.
(Layout::allocated_output_section_count): New function.
(Layout::create_dynamic_symtab): Create .dynsym_shndx section if
needed.
* layout.h (class Layout): Add symtab_xindex_ and dynsym_xindex_
fields. Update declarations.
(Layout::symtab_xindex): New function.
(Layout::dynsym_xindex): New function.
(class Write_symbols_task): Add layout_ field.
(Write_symbols_task::Write_symbols_task): Add layout parameter.
Change caller.
* output.cc (Output_section_headers::Output_section_headers): Add
shstrtab_section parameter. Change all callers.
(Output_section_headers::do_sized_write): Store overflow values
for section count and section string table section index in
section header zero.
(Output_file_header::do_sized_write): Check for overflow of
section count and section string table section index.
(Output_symtab_xindex::do_write): New function.
(Output_symtab_xindex::endian_do_write): New function.
* output.h (class Output_section_headers): Add shstrtab_section_.
Update declarations.
(class Output_symtab_xindex): Define.
(Output_section::has_out_shndx): New function.
* symtab.cc (Symbol::init_fields): Initialize is_ordinary_shndx_
field.
(Symbol::init_base): Add st_shndx and is_ordinary parameters.
Change all callers.
(Sized_symbol::init): Likewise.
(Symbol::output_section): Check for ordinary symbol.
(Symbol_table::add_from_object): Remove orig_sym parameter. Add
st_shndx, is_ordinary, and orig_st_shndx parameters. Change all
callers.
(Symbol_table::add_from_relobj): Add symndx_offset parameter.
Change all callers. Simplify handling of symbols from sections
not included in the link.
(Symbol_table::add_from_dynobj): Handle ordinary symbol
distinction.
(Weak_alias_sorter::operator()): Assert that symbols are
ordinary.
(Symbol_table::sized_finalize_symbol): Handle ordinary symbol
distinction.
(Symbol_table::write_globals): Add symtab_xindex and dynsym_xindex
parameters. Change all callers.
(Symbol_table::sized_write_globals): Likewise. Handle ordinary
symbol distinction. Use SHN_XINDEX when needed.
(Symbol_table::write_section_symbol): Add symtab_xindex
parameter. Change all callers.
(Symbol_table::sized_write_section_symbol): Likewise. Use
SHN_XINDEX when needed.
* symtab.h (class Symbol): Add is_ordinary_shndx_ field. Update
declarations.
(Symbol::shndx): Add is_ordinary parameter. Change all callers.
(Symbol::is_defined): Check is_ordinary.
(Symbol::is_undefined, Symbol::is_weak_undefined): Likewise.
(Symbol::is_absolute, Symbol::is_common): Likewise.
(class Sized_symbol): Update declarations.
(class Symbol_table): Update declarations.
* resolve.cc (Symbol::override_base): Add st_shndx and is_ordinary
parameters. Change all callers.
(Sized_symbol::override): Likewise.
(Symbol_table::override): Likewise.
(symbol_to_bits): Add is_ordinary parameter. Change all callers.
(Symbol_table::resolve): Remove orig_sym parameter. Add st_shndx,
is_ordinary, and orig_st_shndx parameters. Change all callers.
* copy-relocs.cc (Copy_relocs::emit_copy_reloc): Require symbol
to be in an ordinary section.
* dwarf_reader.cc (Sized_dwarf_line_info::symbol_section): Add
object and is_ordinary parameters. Change all callers.
(Sized_dwarf_line_info::read_relocs): Add object parameter.
Change all callers. Don't add undefined or non-ordinary symbols
to reloc_map_.
(Sized_dwarf_line_info::read_line_mappings): Add object parameter.
Change all callers.
* dwarf_reader.h (class Sized_dwarf_line_info): Update
declarations.
* ehframe.cc (Eh_frame::read_fde): Check for ordinary symbol.
* reloc.cc (Sized_relobj::do_read_relocs): Adjust section links.
(Sized_relobj::relocate_sections): Likewise.
* target-reloc.h (scan_relocs): Adjust section symbol index.
(scan_relocatable_relocs): Likewise.
* i386.cc (Scan::local): Check for ordinary symbols.
* sparc.cc (Scan::local): Likewise.
* x86_64.cc (Scan::local): Likewise.
* testsuite/binary_unittest.cc (Sized_binary_test): Update calls
to symbol_section_and_value.
* testsuite/many_sections_test.cc: New file.
* testsuite/Makefile.am (BUILT_SOURCES): Define.
(check_PROGRAMS): Add many_sections_test.
(many_sections_test_SOURCES): Define.
(many_sections_test_DEPENDENCIES): Define.
(many_sections_test_LDFLAGS): Define.
(BUILT_SOURCES): Add many_sections_define.h.
(many_sections_define.h): New target.
(BUILT_SOURCES): Add many_sections_check.h.
(many_sections_check.h): New target.
(check_PROGRAMS): Add many_sections_r_test.
(many_sections_r_test_SOURCES): Define.
(many_sections_r_test_DEPENDENCIES): Define.
(many_sections_r_test_LDFLAGS): Define.
(many_sections_r_test_LDADD): Define.
(many_sections_r_test.o): New target.
* testsuite/Makefile.in: Rebuild.
2008-04-19 18:30:58 +00:00
Vladimir Prus
8e91f0232c
* mi/mi-cmd-var.c (varobj_update_one): Print new
...
value for variable objects that changed type.
2008-04-19 17:03:20 +00:00
Vladimir Prus
603ba1de0b
* varobj.c (varobj_invalidate): Don't touch floating
...
varobjs.
2008-04-19 16:38:25 +00:00
Mark Kettenis
7fc830e290
* symtab.c: (multiple_symbols_modes, multiple_symbols_ask)
...
(multiple_symbols_cancel): Remove extra const.
* symtab.h: Likewise.
2008-04-19 11:39:50 +00:00
Nick Roberts
bb2edc7f62
(linespec.o, mi-interp.o): Add dependencies.
2008-04-19 06:12:16 +00:00
Nick Roberts
dc67126b79
Include interps.h and mi/mi-cmds.h.
...
(decode_line_2): When using MI, always set all breakpoints in menu.
2008-04-19 06:09:37 +00:00
Nick Roberts
79a688876b
New extern for top_level_interpreter.
2008-04-19 06:09:15 +00:00
Nick Roberts
eb18d289ab
(top_level_interpreter): Rename static variable...
...
(top_level_interpreter_ptr): ...to this.
(top_level_interpreter): New function.
2008-04-19 06:08:18 +00:00
Nick Roberts
bcbf8b680d
*** empty log message ***
2008-04-19 06:07:51 +00:00
Craig Silverstein
233a11ab1c
* configure.ac (AC_SEARCH_LIBS): Add check for zlib.
...
* config.in, configure: Regenerate.
* dwarf2read.c: Include zlib.h if present.
Modified *_SECTION macros.
(section_is_p): New.
(dwarf2_locate_sections): Use section_is_p instead of strcmp
(dwarf2_resize_section): New.
to determine whether a given section has a given name.
(zlib_decompress_section): New.
(dwarf2_read_section): Read the compressed section if present
in the binary.
* testsuite/gdb.dwarf2/dw2-compressed.S: New file.
* testsuite/gdb.dwarf2/dw2-compressed.exp: New file.
* MAINTAINERS: Added myself to section Write After Approval.
2008-04-19 05:06:54 +00:00
Thiago Jung Bauermann
a03b3a9785
* defs.h (exec_set_section_offsets): Remove prototype.
...
* exec.c (exec_set_section_offsets): Remove function.
2008-04-19 02:07:19 +00:00
Joel Brobecker
9c1137add5
* gdb.ada/atomic_enum: New test program.
...
* gdb.ada/atomic_enum.exp: New testcase.
2008-04-19 01:35:49 +00:00
Joel Brobecker
9e3867569f
* stabsread.c (cleanup_undefined_types_1): Add instance flags check
...
in the search for the matching symbol.
2008-04-19 01:33:26 +00:00
gdbadmin
eca56c549e
*** empty log message ***
2008-04-19 00:00:34 +00:00
Alan Modra
ec32d1e818
daily update
2008-04-19 00:00:06 +00:00
David S. Miller
c15295d545
* doc/c-sparc.texi: Add syntax section.
2008-04-18 21:19:48 +00:00
H.J. Lu
eff014d916
2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
...
* config/tc-i386.c (build_modrm_byte): Don't check FMA to swap
REG and NDS for instructions with immediate operand.
2008-04-18 18:22:37 +00:00
DJ Delorie
5ae542419d
merge from gcc
2008-04-18 15:14:13 +00:00
H.J. Lu
dae39accc2
gas/
...
2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (build_modrm_byte): Swap REG and NDS for
FMA.
gas/testsuite/
2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/arch-10.d: Updated.
* gas/i386/avx.d: Likewise.
* gas/i386/avx-intel.d: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/x86-64-avx.d: Likewise.
* gas/i386/x86-64-avx-intel.d: Likewise.
opcodes/
2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_VEX_FMA): New.
(OP_EX_VexImmW): Likewise.
(VexFMA): Likewise.
(Vex128FMA): Likewise.
(EXVexImmW): Likewise.
(get_vex_imm8): Likewise.
(OP_EX_VexReg): Likewise.
(vex_i4_done): Renamed to ...
(vex_w_done): This.
(prefix_table): Replace EXVexW with EXVexImmW on vpermil2ps
and vpermil2pd. Replace Vex/Vex128 with VexFMA/Vex128FMA on
FMA instructions.
(print_insn): Updated.
(OP_EX_VexW): Rewrite to swap register in VEX with EX.
(OP_REG_VexI4): Check invalid high registers.
2008-04-18 13:10:32 +00:00
Paolo Bonzini
266df637a8
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
...
Sync with gcc:
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/35457
* configure.ac: Include override.m4.
* configure: Regenerate.
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (restrap): Call `make all' using double-colon rules.
* Makefile.in: Regenerate.
2008-04-11 Eric B. Weddington <eweddington@cso.atmel.com>
* configure.ac: Do not build libssp for the AVR.
* configure: Regenerate.
config:
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/35457
* override.m4: Add this. Make sure aclocal always picks it.
Add more lenient precious variable check, backported from
autoconf trunk.
2008-04-18 11:07:31 +00:00
Nick Clifton
e0c880965c
* aix5ppc-core.c: Define macros for the default architecture and
...
machine for matching core files.
(xcoff64_core_p): Set the architecture and machine to the default
values defined in the macros mentioned above.
* rs6000-core.c: Define macros to determine whether or not the
core file header uses the core_dumpxx header format.
(rs6000coff_core_p): Don't match core files that use the
core_dumpxx header format.
2008-04-18 09:22:24 +00:00
Kai Tietz
da6fa31a22
[patch]: ctor/dtor section must start at alignment of 8 for x86_64-pc-mingw32.
...
* scripttempl/pep.sc: Align start of symbol __CTOR_LIST__.
2008-04-18 09:06:22 +00:00
Nick Clifton
a86a761e17
* MAINTAINERS: Replace reference to configure.in with reference to configure.ac.
2008-04-18 08:55:06 +00:00
David S. Miller
14865d7608
* config/tc-sparc.c (sparc_ip): Recognize %pc22 and %pc10.
2008-04-18 08:47:35 +00:00
Nick Clifton
523108582e
* configure.ac (cr16-*-*): Add case for cr16 target and include gdb
...
as nonconfigurable directories list.
* configure: Regenerate.
2008-04-18 08:45:05 +00:00
Ben Elliston
8386c82a58
* Makefile.in (distclean): Add gstdint.h.
2008-04-18 02:12:45 +00:00
Marc Khouzam
2ec9323810
2008-04-17 Marc Khouzam <marc.khouzam@ericsson.com>
...
* breakpoint.c (update_watchpoint): Always reparse
condition.
2008-04-18 00:41:28 +00:00
Alan Modra
3f7df0f0f4
daily update
2008-04-18 00:00:06 +00:00
gdbadmin
5303f635ca
*** empty log message ***
2008-04-18 00:00:03 +00:00
Doug Evans
66d0bbc7b8
* gdb.opt/Makefile.in: Fix whitespace.
2008-04-17 23:06:54 +00:00
Cary Coutant
c5818ff112
* errors.cc (Errors::info): New function.
...
(gold_info): New function.
* errors.h (Errors::info): New function.
* gold.h (gold_info): New function.
* object.cc (Input_objects::add_object): Print trace output.
* options.cc (options::parse_set): New function.
(General_options::parse_wrap): Deleted.
(General_options::General_options): Deleted initializer.
* options.h (options::String_set): New typedef.
(options::parse_set): New function.
(DEFINE_set): New macro.
(General_options::wrap): Changed to use DEFINE_set. Changed
callers of any_wrap_symbols and is_wrap_symbol.
(General_options::trace, General_options::trace_symbol):
New options.
(General_options::any_wrap_symbols, General_options::is_wrap_symbol)
(General_options::wrap_symbols_): Deleted.
* symtab.cc (Symbol_table::add_from_object): Print trace output.
2008-04-17 22:45:47 +00:00
Joel Brobecker
e9bbd7c5e4
* breakpoint.c (print_one_breakpoint_location): Make sure to print
...
the breakpoint address only once.
2008-04-17 22:43:17 +00:00
Ulrich Weigand
100906b03a
2008-04-17 Daniel Jacobowitz <dan@codesourcery.com>
...
* gdb.threads/linux-dp.exp: Continue after unrecognized lines.
2008-04-17 21:36:23 +00:00
Ulrich Weigand
b6430ec3fe
* configure.srv [powerpc64-*-linux*]: Remove powerpc-e500.o from
...
srv_regobj. Remove rs6000/powerpc-e500.xml and rs6000/power-spe.xml
from reg_xmlfiles.
* linux-ppc-low.c: Include <elf.h>.
(PPC_FEATURE_HAS_ALTIVEC, PPC_FEATURE_HAS_SPE): Define.
(ppc_hwcap): New global variable.
(ppc_regmap): Remove __SPE__ #ifdef sections.
(ppc_regmap_e500): New global variable.
(ppc_cannot_store_register): Update __SPE__ special case.
(ppc_get_hwcap): New function.
(ppc_arch_setup): Use it to determine whether inferior supports
AltiVec or SPE registers. Set the_low_target.regmap if appropriate.
(ppc_fill_vrregset, ppc_store_vrregset): Define unconditionally.
Do not access registers if target does not support AltiVec.
(ppc_fill_evrregset, ppc_store_evrregset): Define unconditionally.
Do not access registers if target does not support SPE.
(target_regsets): Unconditionally include AltiVec and SPE regsets.
2008-04-17 21:22:41 +00:00
Ulrich Weigand
52fa2412d2
2008-04-17 Daniel Jacobowitz <dan@codesourcery.com>
...
* linux-low.c (disabled_regsets, num_regsets): New.
(use_regsets_p): Delete.
(linux_wait_for_process): Clear disabled_regsets.
(regsets_fetch_inferior_registers): Check and set it.
(regsets_store_inferior_registers): Likewise.
(linux_fetch_registers, linux_store_registers): Do not use
use_regsets_p.
(initialize_low): Allocate disabled_regsets.
2008-04-17 21:21:38 +00:00
Joel Brobecker
475bbd17e0
* rs6000-tdep.c (rs6000_gdbarch_init): Use the BFD architecture,
...
rather than a hard-coded architecture, for xcoff executables.
2008-04-17 21:00:53 +00:00
David S. Miller
b5be4a7c8c
* options.cc (General_options::parse_V): New function.
...
* options.h: Add entries for -V and -Qy.
2008-04-17 20:23:59 +00:00
Doug Evans
4584e32ea4
* buildsym.c (watch_main_source_file_lossage): New fn.
...
(end_symtab): Call it.
* gdb.base/hashline1.exp: New testcase.
* gdb.base/hashline2.exp: New testcase.
* gdb.base/hashline2.exp: New testcase.
2008-04-17 17:54:05 +00:00
Doug Evans
86991504e7
* source.c (find_and_open_source): Add some comments clarifying
...
handling of FULLNAME argument. Make static. Remove pointless
xstrdup/xfree.
2008-04-17 17:43:58 +00:00
Pedro Alves
0a320680e8
gdb/
...
* inf-loop.c (inferior_event_handler): Also run the intermediate
continuations in the INF_EXEC_COMPLETE case.
gdb/testsuite/
* gdb.base/step-break.exp, gdb.base/step-break.c: New files.
2008-04-17 11:49:56 +00:00
Ian Lance Taylor
155a0dd763
* common.cc (Symbol_table::allocate_commons): Remove options
...
parameter. Change caller.
(Symbol_table::do_allocate_commons): Remove options parameter.
Change caller. Just call do_allocate_commons_list twice.
(Symbol_table::do_allocate_commons_list): New function, broken out
of do_allocate_commons.
* common.h (class Allocate_commons_task): Remove options_ field.
Update constructor.
* symtab.cc (Symbol_table::Symbol_table): Initialize
tls_commons_.
(Symbol_table::add_from_object): Put TLS common symbols on
tls_commons_ list.
(Symbol_table::sized_finalize_symbol): Handle STT_TLS symbols
which are IN_OUTPUT_DATA.
* symtab.h (class Symbol_table): Add tls_commons_ field. Update
allocate_commons and do_allocate_commons declarations. Declare
do_allocate_commons_list.
* gold.cc (queue_middle_tasks): Update creation of
Allocate_commons_task to not pass options.
* testsuite/Makefile.am (INCLUDES): Add -I.. .
(TLS_TEST_C_FLAGS): New variable.
(tls_test_c_pic.o): New target.
(tls_test_shared.so): Link in tls_test_c_pic.o.
(tls_test_c_pic_ie.o): New target.
(tls_test_ie_shared.so): Link in tls_test_c_pic_ie.o.
(tls_test_DEPENDENCIES, tls_test_LDADD): Add tls_test_c.o.
(tls_test_c.o): New target.
(tls_pic_test_DEPENDENCIES): Add tls_test_c_pic.o.
(tls_pic_test_LDADD): Likewise.
(tls_shared_gd_to_ie_test_DEPENDENCIES): Add tls_test_c_pic.o.
(tls_shared_gd_to_ie_test_LDADD): Likewise.
(tls_test_c_gnu2.o): New target.
(tls_shared_gnu2_gd_to_ie_test_DEPENDENCIES): Add
tls_test_c_gnu2.o.
(tls_shared_gnu2_gd_to_ie_test_LDADD): Likewise.
(tls_test_gnu2_shared.so): Link in tls_test_c_gnu2.o.
(tls_test_shared_nonpic.so): Link in tls_test_c.o.
* testsuite/tls_test.cc: Include "config.h".
(t_last): Call t11_last.
* testsuite/tls_test.h (t11, t11_last): Declare.
* testsuite/tls_test_c.c: New file.
* testsuite/tls_test_main.cc (thread_routine): Call t11.
* configure.ac: Check for OpenMP support.
* configure, config.in, Makefile.in: Rebuild.
* testsuite/Makefile.in: Rebuild.
2008-04-17 07:12:00 +00:00
David S. Miller
32b769e114
* sparc.cc (Target_sparc::Scan): Change from struct to class.
...
Add issued_non_pic_error_ field. Declare check_non_pic.
(Target_sparc::Scan::check_non_pic): New function.
(Target_sparc::Scan::local): Call check_non_pic as appropriate.
(Target_sparc::Scan::global): Likewise.
2008-04-17 07:07:37 +00:00
David S. Miller
11936fb178
* configure.ac (FN_PTRS_IN_SO_WITHOUT_PIC): Add sparc64.
...
* configure: Rebuild.
2008-04-17 05:52:32 +00:00
Cary Coutant
edfbb02953
* i386.cc (Target_i386::define_tls_base_symbol): New function.
...
(Target_i386::tls_base_symbol_defined_): New field.
(Target_i386::Scan::local): Define _TLS_MODULE_BASE_ symbol.
(Target_i386::Scan::global): Likewise.
* symtab.cc (sized_finalize_symbol): Add check for TLS symbol.
* x86_64.cc (Target_x86_64::define_tls_base_symbol): New function.
(Target_x86_64::tls_base_symbol_defined_): New field.
(Target_x86_64::Scan::local): Define _TLS_MODULE_BASE_ symbol.
(Target_x86_64::Scan::global): Likewise.
2008-04-17 02:00:54 +00:00
Tom Tromey
700b53b17a
* cli/cli-decode.h (CMD_ASYNC_OK): New define.
...
(set_cmd_async_ok, get_cmd_async_ok): Declare.
* cli/cli-decode.c (set_cmd_async_ok): New function.
(get_cmd_async_ok): New function.
* cli/cli-cmds.c (init_cli_cmds): Mark "pwd", "help", "info", and
"show" as async-ok.
* top.c (execute_command): Use get_cmd_async_ok.
* infcmd.c: Include cli/cli-decode.h.
(_initialize_infcmd): Mark "interrupt" as async-ok.
* Makefile.in (infcmd.o): Depend on cli_decode_h.
2008-04-17 00:25:01 +00:00
Cary Coutant
f3c69fcab1
* symtab.h (Symbol::is_strong_undefined): Removed unused function.
...
(Symbol::needs_plt_entry): Allow weak undefined symbols.
(Symbol::needs_dynamic_reloc): Allow weak undefined symbols when
building shared libraries.
* testsuite/Makefile.am (weak_undef_nonpic_test): New target.
(weak_undef_file1_nonpic.o, weak_undef_file2_nonpic.o)
(weak_undef_lib_nonpic.so, alt/weak_undef_lib_nonpic.so): New targets.
* testsuite/Makefile.in: Rebuild.
* testsuite/weak_undef.h: New file.
* testsuite/weak_undef_file1.cc: Add extra test cases.
* testsuite/weak_undef_file2.cc: Likewise.
* testsuite/weak_undef_test.cc: Likewise.
2008-04-17 00:14:36 +00:00
gdbadmin
ed83b95326
*** empty log message ***
2008-04-17 00:00:33 +00:00