This fixes PR symtab/14604, PR symtab/14605, and Jan's test at
https://sourceware.org/ml/gdb-patches/2014-07/msg00158.html, in a tree
with bddbbed reverted:
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
The PRs are about variables described by the DWARF as being split over
multiple registers using DWARF piece information, but some of those
registers being marked as optimised out (not saved) by a later frame.
GDB currently incorrectly mishandles these partially-optimized-out
values.
Even though we can usually tell from the debug info whether a local or
global is optimized out, handling the case of a local living in a
register that was not saved in a frame requires fetching the variable.
GDB also needs to fetch a value to tell whether parts of it are
"<unavailable>". Given this, it's not worth it to try to avoid
fetching lazy optimized-out values based on debug info alone.
So this patch makes GDB track which chunks of a value's contents are
optimized out like it tracks <unavailable> contents. That is, it
makes value->optimized_out be a bit range vector instead of a boolean,
and removes the struct lval_funcs check_validity and check_any_valid
hooks.
Unlike Andrew's series which this is based on (at
https://sourceware.org/ml/gdb-patches/2013-08/msg00300.html, note some
pieces have gone in since), this doesn't merge optimized out and
unavailable contents validity/availability behind a single interface,
nor does it merge the bit range vectors themselves (at least yet).
While it may be desirable to have a single entry point that returns
existence of contents irrespective of what may make them
invalid/unavailable, several places want to treat optimized out /
unavailable / etc. differently, so each spot that potentially could
use it will need to be careful considered on case-by-case basis, and
best done as a separate change.
This fixes Jan's test, because value_available_contents_eq wasn't
considering optimized out value contents. It does now, and because of
that it's been renamed to value_contents_eq.
A new intro comment is added to value.h describing "<optimized out>",
"<not saved>" and "<unavailable>" values.
gdb/
PR symtab/14604
PR symtab/14605
* ada-lang.c (coerce_unspec_val_to_type): Use
value_contents_copy_raw.
* ada-valprint.c (val_print_packed_array_elements): Adjust.
* c-valprint.c (c_val_print): Use value_bits_any_optimized_out.
* cp-valprint.c (cp_print_value_fields): Let the common printing
code handle optimized out values.
(cp_print_value_fields_rtti): Use value_bits_any_optimized_out.
* d-valprint.c (dynamic_array_type): Use
value_bits_any_optimized_out.
* dwarf2loc.c (entry_data_value_funcs): Remove check_validity and
check_any_valid fields.
(check_pieced_value_bits): Delete and inline ...
(check_pieced_synthetic_pointer): ... here.
(check_pieced_value_validity): Delete.
(check_pieced_value_invalid): Delete.
(pieced_value_funcs): Remove check_validity and check_any_valid
fields.
(read_pieced_value): Use mark_value_bits_optimized_out.
(write_pieced_value): Switch to use
mark_value_bytes_optimized_out.
(dwarf2_evaluate_loc_desc_full): Copy the value contents instead
of assuming the whole value is optimized out.
* findvar.c (read_frame_register_value): Remove special handling
of optimized out registers.
(value_from_register): Use mark_value_bytes_optimized_out.
* frame-unwind.c (frame_unwind_got_optimized): Use
mark_value_bytes_optimized_out.
* jv-valprint.c (java_value_print): Adjust.
(java_print_value_fields): Let the common printing code handle
optimized out values.
* mips-tdep.c (mips_print_register): Remove special handling of
optimized out registers.
* opencl-lang.c (lval_func_check_validity): Delete.
(lval_func_check_any_valid): Delete.
(opencl_value_funcs): Remove check_validity and check_any_valid
fields.
* p-valprint.c (pascal_object_print_value_fields): Let the common
printing code handle optimized out values.
* stack.c (read_frame_arg): Remove special handling of optimized
out values. Fetch both VAL and ENTRYVAL before comparing
contents. Adjust to value_available_contents_eq rename.
* valprint.c (valprint_check_validity)
(val_print_scalar_formatted): Use value_bits_any_optimized_out.
(val_print_array_elements): Adjust.
* value.c (struct value) <optimized_out>: Now a VEC(range_s).
(value_bits_any_optimized_out): New function.
(value_entirely_covered_by_range_vector): New function, factored
out from value_entirely_unavailable.
(value_entirely_unavailable): Reimplement.
(value_entirely_optimized_out): New function.
(insert_into_bit_range_vector): New function, factored out from
mark_value_bits_unavailable.
(mark_value_bits_unavailable): Reimplement.
(struct ranges_and_idx): New struct.
(find_first_range_overlap_and_match): New function, factored out
from value_available_contents_bits_eq.
(value_available_contents_bits_eq): Rename to ...
(value_contents_bits_eq): ... this. Check both unavailable
contents and optimized out contents.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this.
(allocate_value_lazy): Remove reference to the old optimized_out
boolean.
(allocate_optimized_out_value): Use
mark_value_bytes_optimized_out.
(require_not_optimized_out): Adjust to check whether the
optimized_out vec is empty.
(ranges_copy_adjusted): New function, factored out from
value_contents_copy_raw.
(value_contents_copy_raw): Also copy the optimized out ranges.
Assert the destination ranges aren't optimized out.
(value_contents_copy): Update comment, remove call to
require_not_optimized_out.
(value_contents_equal): Adjust to check whether the optimized_out
vec is empty.
(set_value_optimized_out, value_optimized_out_const): Delete.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New functions.
(value_entirely_optimized_out, value_bits_valid): Delete.
(value_copy): Take a VEC copy of the 'optimized_out' field.
(value_primitive_field): Remove special handling of optimized out.
(value_fetch_lazy): Assert that lazy values have no unavailable
regions. Use value_bits_any_optimized_out. Remove some special
handling for optimized out values.
* value.h: Add intro comment about <optimized out> and
<unavailable>.
(struct lval_funcs): Remove check_validity and check_any_valid
fields.
(set_value_optimized_out, value_optimized_out_const): Remove.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New declarations.
(value_bits_any_optimized_out): New declaration.
(value_bits_valid): Delete declaration.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this, and extend comments.
gdb/testsuite/
PR symtab/14604
PR symtab/14605
* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
gdb_test.
Constructing a value based on a type and address might change the type
of the newly constructed value. Thus re-fetch type via value_type to ensure
we have the correct type at hand.
gdb/ChangeLog
* ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from value.
(ada_template_to_fixed_record_type_1): Likewise.
(ada_to_fixed_type_1): Likewise.
* cp-valprint.c (cp_print_value_fields_rtti): Likewise.
(cp_print_value): Likewise.
* d-valprint.c (dynamic_array_type): Likewise.
* findvar.c (address_of_variable): Likewise.
* jv-valprint.c (java_value_print): Likewise.
* valops.c (value_ind): Likewise.
* value.c (coerce_ref): Likewise.
This reverts the following patch series, as they cause some regresssions.
commit 37c1ab67a3
type: add c99 variable length array support
gdb/
* dwarf2loc.c (dwarf2_locexpr_baton_eval): New function.
(dwarf2_evaluate_property): New function.
* dwarf2loc.h (dwarf2_evaluate_property): New function prototype.
* dwarf2read.c (attr_to_dynamic_prop): New function.
(read_subrange_type): Use attr_to_dynamic_prop to read high bound
attribute.
* gdbtypes.c: Include dwarf2loc.h.
(is_dynamic_type): New function.
(resolve_dynamic_type): New function.
(resolve_dynamic_bounds): New function.
(get_type_length): New function.
(check_typedef): Use get_type_length to compute type length.
* gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro.
(TYPE_LOW_BOUND_KIND): New macro.
(is_dynamic_type): New function prototype.
* value.c (value_from_contents_and_address): Call resolve_dynamic_type
to resolve dynamic properties of the type. Update comment.
* valops.c (get_value_at, value_at, value_at_lazy): Update comment.
commit 26cb189f8b
vla: enable sizeof operator to work with variable length arrays
gdb/
* eval.c (evaluate_subexp_for_sizeof) <OP_VAR_VALUE>: If the type
passed to sizeof is dynamic evaluate the argument to compute the length.
commit 04b19544ef
vla: enable sizeof operator for indirection
gdb/
* eval.c (evaluate_subexp_for_sizeof) <UNOP_IND>: Create an indirect
value and retrieve the dynamic type size.
commit bcd629a44f
vla: update type from newly created value
gdb/
* ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from value.
(ada_template_to_fixed_record_type_1): Likewise.
(ada_to_fixed_type_1): Likewise.
* cp-valprint.c (cp_print_value_fields_rtti): Likewise.
(cp_print_value): Likewise.
* d-valprint.c (dynamic_array_type): Likewise.
* eval.c (evaluate_subexp_with_coercion): Likewise.
* findvar.c (address_of_variable): Likewise.
* jv-valprint.c (java_value_print): Likewise.
* valops.c (value_ind): Likewise.
* value.c (coerce_ref): Likewise.
commit b86138fb04
vla: print "variable length" for unresolved dynamic bounds
gdb/
* c-typeprint.c (c_type_print_varspec_suffix): Added
check for not yet resolved high bound. If unresolved, print
"variable length" string to the console instead of random
length.
commit e1969afbd4
vla: support for DW_AT_count
gdb/
* dwarf2read.c (read_subrange_type): Convert DW_AT_count to a dynamic
property and store it as the high bound and flag the range accordingly.
* gdbtypes.c (resolve_dynamic_bounds): If range is flagged as
RANGE_UPPER_BOUND_IS_COUNT assign low + high - 1 as the new high bound.
* gdbtypes.h (enum range_flags): New enum.
(struct range_bounds): Add flags member.
commit 92b09522dc
vla: resolve dynamic bounds if value contents is a constant byte-sequence
gdb/
* findvar.c (default_read_var_value): Resolve dynamic bounds if location
points to a constant blob.
commit 3bce82377f
vla: evaluate operand of sizeof if its type is a vla
gdb/
* eval.c (evaluate_subexp_for_sizeof): Add enum noside argument.
(evaluate_subexp_standard): Pass noside argument.
(evaluate_subexp_for_sizeof) <BINOP_SUBSCRIPT>: Handle subscript case
if noside equals EVAL_NORMAL. If the subscript yields a vla type
re-evaluate subscript operation with EVAL_NORMAL to enable sideffects.
* gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated.
* gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case.
gdb/testsuite
* gdb.base/vla-sideeffect.c: New file.
* gdb.base/vla-sideeffect.exp: New file.
commit 504f34326e
test: cover subranges with present DW_AT_count attribute
gdb/testsuite/
* gdb.dwarf2/count.exp: New file.
commit 1a237e0ee5
test: multi-dimensional c99 vla.
gdb/testsuite/
* gdb.base/vla-multi.c: New file.
* gdb.base/vla-multi.exp: New file.
commit 024e13b46f
test: evaluate pointers to C99 vla correctly.
gdb/testsuite/
* gdb.base/vla-ptr.c: New file.
* gdb.base/vla-ptr.exp: New file.
commit c8655f75e2
test: basic c99 vla tests for C primitives
gdb/testsuite/
* gdb.base/vla-datatypes.c: New file.
* gdb.base/vla-datatypes.exp: New file.
commit 58a84dcf29
test: add mi vla test
gdb/testsuite/
* gdb.mi/mi-vla-c99.exp: New file.
* gdb.mi/vla.c: New file.
Constructing a value based on a type and address might change the type
of the newly constructed value. Thus re-fetch type via value_type to ensure
we have the correct type at hand.
* ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from value.
(ada_template_to_fixed_record_type_1): Likewise.
(ada_to_fixed_type_1): Likewise.
* cp-valprint.c (cp_print_value_fields_rtti): Likewise.
(cp_print_value): Likewise.
* d-valprint.c (dynamic_array_type): Likewise.
* eval.c (evaluate_subexp_with_coercion): Likewise.
* findvar.c (address_of_variable): Likewise.
* jv-valprint.c (java_value_print): Likewise.
* valops.c (value_ind): Likewise.
* value.c (coerce_ref): Likewise.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
With:
struct static_struct { static int aaa; };
struct static_struct sss;
int main () { return 0; }
We get:
(gdb) p sss
$1 = {static aaa = <optimized out>}
(gdb) p sss.aaa
field aaa is nonexistent or has been optimized out
Note that the "field aaa ..." message is an error being thrown.
GDB is graceful everywhere else when printing optimized out values.
IOW it usually prints an <optimized out> value and puts that in the
value history. I see no reason for here to be different, more so that
when the print the whole "containing" object (well, it's a static
field, so it's not really a container), we already print <optimized
out>.
After the patch:
(gdb) p sss
$1 = {static aaa = <optimized out>}
(gdb) p sss.aaa
$2 = <optimized out>
The value_entirely_optimized_out checks are there to preserve
behavior. Without those, if the static field is a struct/union, GDB
would go and print its fields one by one (and print <optimized out>
for each).
Tested on x86_64 Fedora 17.
gdb/
2013-10-25 Pedro Alves <palves@redhat.com>
* cp-valprint.c (cp_print_value_fields): No longer handle a NULL
static field value.
(cp_print_static_field): If the value is entirely optimized out,
print <optimized out> here.
* jv-valprint.c (java_print_value_fields): No longer handle a NULL
static field value.
* p-valprint.c (pascal_object_print_static_field): If the value is
entirely optimized out, print <optimized out> here.
* valops.c (do_search_struct_field)
(value_struct_elt_for_reference): No longer handle a NULL static
field value.
* value.c (value_static_field): Return an optimized out value
instead of NULL.
gdb/testsuite/
2013-10-25 Pedro Alves <palves@redhat.com>
* gdb.cp/m-static.exp: Adjust expected output of printing a
nonexistent or optimized out static field. Also test printing the
the "container" object.
Currently, in some scenarios, GDB prints <optimized out> when printing
outer frame registers. An <optimized out> register is a confusing
concept. What this really means is that the register is
call-clobbered, or IOW, not saved by the callee. This patch makes GDB
say that instead.
Before patch:
(gdb) p/x $rax $1 = <optimized out>
(gdb) info registers rax
rax <optimized out>
After patch:
(gdb) p/x $rax
$1 = <not saved>
(gdb) info registers rax
rax <not saved>
However, if for some reason the debug info describes a variable as
being in such a register (**), we still want to print <optimized out>
when printing the variable. IOW, <not saved> is reserved for
inspecting registers at the machine level. The patch uses
lval_register+optimized_out to encode the not saved registers, and
makes it so that optimized out variables always end up in
!lval_register values.
** See <https://sourceware.org/ml/gdb-patches/2012-08/msg00787.html>.
Current/recent enough GCC doesn't mark variables/arguments as being in
call-clobbered registers in the ranges corresponding to function
calls, while older GCCs did. Newer GCCs will just not say where the
variable is, so GDB will end up realizing the variable is optimized
out.
frame_unwind_got_optimized creates not_lval optimized out registers,
so by default, in most cases, we'll see <optimized out>.
value_of_register is the function eval.c uses for evaluating
OP_REGISTER (again, $pc, etc.), and related bits. It isn't used for
anything else. This function makes sure to return lval_register
values. The patch makes "info registers" and the MI equivalent use it
too. I think it just makes a lot of sense, as this makes it so that
when printing machine registers ($pc, etc.), we go through a central
function.
We're likely to need a different encoding at some point, if/when we
support partially saved registers. Even then, I think
value_of_register will still be the spot to tag the intention to print
machine register values differently.
value_from_register however may also return optimized out
lval_register values, so at a couple places where we're computing a
variable's location from a dwarf expression, we convert the resulting
value away from lval_register to a regular optimized out value.
Tested on x86_64 Fedora 17
gdb/
2013-10-02 Pedro Alves <palves@redhat.com>
* cp-valprint.c (cp_print_value_fields): Adjust calls to
val_print_optimized_out.
* jv-valprint.c (java_print_value_fields): Likewise.
* p-valprint.c (pascal_object_print_value_fields): Likewise.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full)
<DWARF_VALUE_REGISTER>: If the register was not saved, return a
new optimized out value.
* findvar.c (address_from_register): Likewise.
* frame.c (put_frame_register): Tweak error string to say the
register was not saved, rather than optimized out.
* infcmd.c (default_print_one_register_info): Adjust call to
val_print_optimized_out. Use value_of_register instead of
get_frame_register_value.
* mi/mi-main.c (output_register): Use value_of_register instead of
get_frame_register_value.
* valprint.c (valprint_check_validity): Likewise.
(val_print_optimized_out): New value parameter. If the value is
lval_register, print <not saved> instead.
(value_check_printable, val_print_scalar_formatted): Adjust calls
to val_print_optimized_out.
* valprint.h (val_print_optimized_out): New value parameter.
* value.c (struct value) <optimized_out>: Extend comment.
(error_value_optimized_out): New function.
(require_not_optimized_out): Use it. Use a different string for
lval_register values.
* value.h (error_value_optimized_out): New declaration.
* NEWS: Mention <not saved>.
gdb/testsuite/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-reg-undefined.exp <pattern_rax_rbx_rcx_print,
pattern_rax_rbx_rcx_info>: Set to "<not saved>".
* gdb.mi/mi-reg-undefined.exp (opt_out_pattern): Delete.
(not_saved_pattern): New.
Replace use of the former with the latter.
gdb/doc/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Registers): Expand description of saved registers
in frames. Explain <not saved>.
Enum values rename as well. All uses updated.
* valprint.h (value_print_options): Rename member pretty to
pretty format. Rename member prettyprint_arrays to
prettyformat_arrays. Rename member prettyprint_structs to
prettyformat_structs. All uses updated.
(get_no_prettyformat_print_options): Renamed from
get_raw_print_options.
* valprint.c (get_no_prettyformat_print_options): Renamed from
get_raw_print_options. All callers updated.
(show_prettyformat_structs): Renamed from show_prettyprint_structs.
All callers updated.
(show_prettyformat_arrays): Renamed from show_prettyprint_arrays.
All callers updated.
(_initialize_valprint): Improve help text for "set print pretty" and
"set print arrays".
testsuite/
* gdb.base/default.exp: Update expected output of "show print array"
and "show print pretty".
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* p-valprint.c (pascal_val_print) <TYPE_CODE_PTR>: Optionally
print space before string or vtbl.
* m2-valprint.c (print_unpacked_pointer): Optionally print space
before string.
* jv-valprint.c (java_value_print): Print space before string.
* go-valprint.c (print_go_string): Print space before string.
* f-valprint.c (f_val_print) <TYPE_CODE_PTR>: Optionally print
space before string.
* c-valprint.c (c_val_print) <TYPE_CODE_PTR>: Optionally print
space before string or vtbl.
* auxv.c (fprint_target_auxv): Print space after address.
and fields.name members from char * to const char *. All uses updated.
(struct cplus_struct_type): Change type of fn_fieldlists.name member
from char * to const char *. All uses updated.
(type_name_no_tag): Update.
(lookup_unsigned_typename, lookup_signed_typename): Update.
* gdbtypes.c (type_name_no_tag): Change result type
from char * to const char *. All callers updated.
(lookup_unsigned_typename, lookup_signed_typename): Change type of
name parameter from char * to const char *.
* symtab.h (struct cplus_specific): Change type of demangled_name
member from char * to const char *. All uses updated.
(struct general_symbol_info): Change type of name and
mangled_lang.demangled_name members from char * to const char *.
All uses updated.
(symbol_get_demangled_name, symbol_natural_name): Update.
(symbol_demangled_name, symbol_search_name): Update.
* symtab.c (symbol_get_demangled_name): Change result type
from char * to const char *. All callers updated.
(symbol_natural_name, symbol_demangled_name): Ditto.
(symbol_search_name): Ditto.
(completion_list_add_name): Change type of symname,sym_text,
text,word parameters from char * to const char *.
(completion_list_objc_symbol): Change type of sym_text,
text,word parameters from char * to const char *.
* ada-lang.c (find_struct_field): Change type of name parameter
from char * to const char *.
(encoded_ordered_before): Similarly for N0,N1 parameters.
(old_renaming_is_invisible): Similarly for function_name parameter.
(ada_type_name): Change result type from char * to const char *.
All callers updated.
* ada-lang.h (ada_type_name): Update.
* buildsym.c (hashname): Change type of name parameter
from char * to const char *.
* buildsym.h (hashname): Update.
* dbxread.c (end_psymtab): Change type of include_list parameter
from char ** to const char **.
* dwarf2read.c (determine_prefix): Change result type
from char * to const char *. All callers updated.
* f-lang.c (find_common_for_function): Change type of name, funcname
parameters from char * to const char *.
* f-lang.c (find_common_for_function): Update.
* f-valprint.c (list_all_visible_commons): Change type of funcname
parameters from char * to const char *.
* gdbarch.sh (static_transform_name): Change type of name parameter
and result from char * to const char *.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* i386-sol2-tdep.c (i386_sol2_static_transform_name): Change type
of name parameter from char * to const char *.
* jv-lang.c (java_primitive_type_from_name): Ditto.
(java_demangled_signature_length): Similarly for signature parameter.
(java_demangled_signature_copy): Ditto.
(java_demangle_type_signature): Ditto.
* jv-lang.h (java_primitive_type_from_name): Update.
(java_demangle_type_signature): Update.
* objc-lang.c (specialcmp): Change type of a,b parameters
from char * to const char *.
* p-lang.c (is_pascal_string_type): Change type of arrayname parameter
from char * to const char *. All callers updated.
* p-lang.h (is_pascal_string_type): Update.
* solib-frv.c (find_canonical_descriptor_in_load_object): Change type
of name parameter from char * to const char *.
* sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Ditto.
* utils.c (fprintf_symbol_filtered): Ditto.
* defs.h (fprintf_symbol_filtered): Update.
* sparc-tdep.h (sparc_sol2_static_transform_name): Update.
* stabsread.h (end_psymtab): Update.
* stack.c (find_frame_funname): Change type of funname parameter
from char ** to const char **.
* stack.h (find_frame_funname): Update.
* typeprint.c (type_print): Change type of varstring parameter
from char * to const char *.
* value.h (type_print): Update.
* xcoffread.c (xcoff_start_psymtab): Change type of filename parameter
from char * to const char *. All callers updated.
(xcoff_end_psymtab): Change type of include_list parameter
from char ** to const char **. All callers updated.
(swap_sym): Similarly for name parameter. All callers updated.
* coffread.c (patch_type): Add (char*) cast to xfree parameter.
Use xstrdup.
(process_coff_symbol): Use xstrdup.
* stabsread.c (stabs_method_name_from_physname): Renamed from
update_method_name_from_physname. Change result type from void
to char *. All callers updated.
(read_member_functions): In has_destructor case, store name in objfile
obstack instead of malloc space. In !has_stub case, fix mem leak.
* value.h (unpack_bits_as_long): Delete declaration.
(unpack_value_bits_as_long): Declare.
(unpack_value_field_as_long): Declare.
(value_field_bitfield): Declare.
* value.c (unpack_bits_as_long): Rename to...
(unpack_value_bits_as_long_1): ... this. Add embedded_offset and
value parameters. Return the extracted result in a new output
parameter. If the value contents are unavailable, return false,
otherwise return true.
(unpack_value_bits_as_long): New.
(unpack_field_as_long): Rename to...
(unpack_value_field_as_long_1): ... this. Add embedded_offset and
Add embedded_offset and value parameters. Return the extracted
result in a new output parameter. If the value contents are
unavailable, return false, otherwise return true.
(unpack_value_field_as_long): New.
(unpack_field_as_long_1): New.
(unpack_field_as_long): Reimplement as wrapper around
unpack_value_field_as_long_1.
(value_field_bitfield): New function.
* valops.c (value_fetch_lazy): When fetching a bitfield, use
unpack_value_bits_as_long. Mark the value as unavailable, if it
is unavailable.
* jv-valprint.c (java_print_value_fields): Use
value_field_bitfield.
* p-valprint.c (pascal_object_print_value_fields): Use
value_field_bitfield.
* cp-valprint.c (cp_print_value_fields): Use value_field_bitfield.
Don't lose embedded_offset in printing routines throughout.
gdb/
* valprint.h (val_print_array_elements): Change prototype.
* valprint.c (val_print_array_elements): Add `embedded_offset'
parameter, and adjust to pass it down to val_print, while passing
`valaddr' or `address' unmodified. Take embedded_offset into
account when checking repetitions.
* c-valprint.c (c_val_print): Pass embedded_offset to
val_print_array_elements instead of adjusting `valaddr' and
`address'.
* m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
embedded_offset to val_print_array_elements instead of adjusting
`valaddr'.
* p-lang.h (pascal_object_print_value_fields): Adjust prototype.
* p-valprint.c (pascal_val_print): Pass embedded_offset to
val_print_array_elements and pascal_object_print_value_fields
instead of adjusting `valaddr'.
(pascal_object_print_value_fields): Add `offset' parameter, and
adjust to use it.
(pascal_object_print_value): Add `offset' parameter, and adjust to
use it.
(pascal_object_print_static_field): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* ada-valprint.c (val_print_packed_array_elements): Add `offset'
parameter, and adjust to use it. Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
(ada_val_print): Rename `valaddr0' parameter to `valaddr'.
(ada_val_print_array): Add `offset' parameter, and adjust to use
it.
(ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
`embedded_offset' to `offset'. Don't re-adjust `valaddr'.
Instead work with offsets. Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents. Change `defer_val_int' local type to CORE_ADDR,
and use value_from_pointer to extract a target pointer, rather
than value_from_longest.
(print_variant_part): Add `offset' parameter. Replace
`outer_valaddr' parameter by a new `outer_offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
(ada_value_print): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
(print_record): Add `offset' parameter, and adjust to pass it
down.
(print_field_values): Add `offset' parameter. Replace
`outer_valaddr' parameter by a new `outer_offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
Use value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* d-valprint.c (dynamic_array_type): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* jv-valprint.c (java_print_value_fields): Add `offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
(java_print_value_fields): Take `offset' into account. Don't
re-adjust `valaddr'. Instead pass down adjusted offsets.
(java_val_print): Take `embedded_offset' into account. Pass it to
java_print_value_fields.
* f-valprint.c (f77_print_array_1): Add `embedded_offset'
parameter. Don't re-adjust `valaddr' or `address'. Instead pass
down adjusted offsets.
(f77_print_array): Add `embedded_offset' parameter. Pass it down.
(f_val_print): Take `embedded_offset' into account.
gdb/testsuite/
* gdb.base/printcmds.c (some_struct): New struct and instance.
* gdb.base/printcmds.exp (test_print_repeats_embedded_array): New
procedure.
<global scope>: Call it.
* jv-lang.c: White space.
* jv-typeprint.c: White space.
* jv-valprint.c: White space.
* language.c: White space.
* libunwind-frame.c: White space.
* linespec.c: White space.
* linux-nat.c: White space.
* linux-record.c: White space.
* linux-thread-db.c: White space.
smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
Use type architecture instead of current_gdbarch.
* gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
Add GDBARCH paramter.
* gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
Add GDBARCH parameter. Use it instead of current_gdbarch.
* c-typeprint.c (c_type_print_modifier): Update call.
* parse.c (push_type_address_space): Likewise.
* findvar.c (extract_typed_address, store_typed_address): Use type
architecture instead of current_gdbarch.
* value.c (value_as_address, unpack_field_as_long): Use type architecture
instead of current_gdbarch.
* doublest.c (floatformat_from_length): Add GDBARCH argument. Use it
instead of current_gdbarch.
(floatformat_from_type): Pass type architecture.
* infcall.c (find_function_addr): Use type architecture instead
of current_gdbarch.
* valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
value_bit_index): Use type architecture instead of current_gdbarch.
* valops.c (value_cast, value_slice): Likewise.
* value.h (modify_field): Add TYPE argument.
* value.c (modify_field): Add TYPE argument. Use type architecture
instead of current_gdbarch.
(set_internalvar_component): Likewise.
* eval.c (evaluate_struct_tuple): Update call.
* valops.c (value_assign): Likewise.
* ada-lang.c (modify_general_field): Likewise. Add TYPE argument.
(make_array_descriptor): Update calls.
(move_bits): Add BITS_BIG_ENDIAN_P argument. Use it instead of
current_gdbarch.
(ada_value_assign, value_assign_to_component): Update calls.
(decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
value_assign_to_component): Use type arch instead of current_gdbarch.
* printcmd.c (float_type_from_length): Remove GDBARCH argument,
use type architecture instead.
(print_scalar_formatted, printf_command): Update calls. Use type
architecture instead of current_gdbarch.
* valprint.c (val_print_type_code_int): Use type architecture
instead of current_gdbarch.
* varobj.c (value_get_print_value): Likewise.
* python/python-prettyprint.c (print_string_repr): Add GDBARCH
argument. Use it instead of current_gdbarch.
(apply_val_pretty_printer): Update call.
* ada-valprint.c (ada_val_print_1): Use type architecture instead
of current_gdbarch.
* c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
Use it instead of current_gdbarch.
(c_val_print): Update calls passing type architecture.
* f-valprint.c (f_val_print): Use type architecture instead of
current_gdbarch.
* jv-valprint (java_value_print): Likewise.
* m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
Use it instead of current_gdbarch.
(print_unpacked_pointer): Update calls passing type architecture.
* scm-valprint.c (scm_scmval_print): Use type architecture instead of
current_gdbarch.
* gnu-v3-abi.c (get_class_arch): Remove.
(gnuv3_rtti_type): Use get_type_arch instead of get_class_arch. Remove
special-case check for Java classes.
(gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
Use get_type_arch instead of get_class_arch.
java_long_type, java_boolean_type, java_char_type, java_float_type,
java_double_type, java_void_type): Remove.
(struct builtin_java_type): New data type.
(builtin_java_type): Add prototype.
(java_primitive_type): Add GDBARCH argument.
(java_primitive_type_from_name): Likewise.
(type_from_class): Likewise.
* jv-lang.c (java_int_type, java_byte_type, java_short_type,
java_long_type, java_boolean_type, java_char_type, java_float_type,
java_double_type, java_void_type): Remove.
(build_java_types, builtin_java_type): New functions.
(java_type_data): New static variable.
(_initialize_java_language): Initialize it. No longer initialize
global types.
(java_language_arch_info): Use per-architecture types.
(java_primitive_type): Add GDBARCH argument. Return per-architecture
type instead of refering to global variable.
(java_primitive_type_from_name): Add GDBARCH argument.
(java_primitive_type_name): New function.
(java_demangled_signature_length): Use it instead of
java_primitive_type_from_name.
(java_demangled_signature_copy): Likewise.
(type_from_class): Add GDBARCH argument. Pass to java_link_class_type,
java_primitive_type, and recursive type_from_class call.
(java_link_class_type): Add GDBARCH argument. Pass to type_from_class
calls. Use per-architecture types instead of global types.
* jv-exp.y (parse_java_type): New define.
Use per-architecture types instead of global types througout.
* jv-valprint.c (java_value_print): Pass architecture to
type_from_class and java_primitive_type_from_name. Use per-
architecture types instead of global types.
Pedro Alves
Gary Benson
Sanimir Agovic
Joel Brobecker
Tom Tromey
Doug Evans
Aleksandar Ristovski
Joel Brobecker
Michael Snyder
Ulrich Weigand
Jan Kratochvil
Daniel Jacobowitz
Eli Zaretskii