Revert parts of commit fee24f1c5b ("objdump improvements for mips
elf64"), <https://sourceware.org/ml/binutils/2003-03/msg00108.html>, and
make the `->reloc_count' member of `struct bfd_section' hold the actual
number of internal relocations stored in its `->relocation' vector. To
do so adjust `mips_elf64_slurp_one_reloc_table' to set `->reloc_count'
to the actual number of internal relocations retrieved and discard
`mips_elf64_canonicalize_reloc', `mips_elf64_canonicalize_dynamic_reloc'
and their corresponding target macros. Contrary to the description of
`mips_elf64_slurp_one_reloc_table', adjusted appropriately, this makes
generic relocation processing code happy and satisfies the "merge notes
section" binutils test case.
Add extra binutils test cases to expand the coverage of the generic
"merge notes section" test case, now passing with the n64 ABI, across
the MIPS o32, n32 and n64 ABIs regardless of the default ABI selected in
target configuration, and also to verify correctness of the relocations
produced. Conversely, do not provide any additional test cases for the
original issue addressed with the commit referred:
- objdump would display only 1/3 of the total number of relocations,
because it used the external relocation count, but each external
relocation is brought in as 3 internal relocations.
as n64 ABI relocation processing with `objdump -r' and `objdump -R' is
already widely covered across the GAS and LD test suites.
bfd/
* elf64-mips.c (mips_elf64_canonicalize_reloc): Remove prototype
and function.
(mips_elf64_canonicalize_dynamic_reloc): Likewise.
(mips_elf64_slurp_one_reloc_table): Set `reloc_count' to the
actual number of internal relocations retrieved. Adjust
function description.
(bfd_elf64_canonicalize_reloc): Remove macro.
(bfd_elf64_canonicalize_dynamic_reloc): Likewise.
binutils/
* testsuite/binutils-all/mips/mips-note-2.d: New test.
* testsuite/binutils-all/mips/mips-note-2r.d: New test.
* testsuite/binutils-all/mips/mips-note-2-n32.d: New test.
* testsuite/binutils-all/mips/mips-note-2-n64.d: New test.
* testsuite/binutils-all/mips/mips-note-2r-n32.d: New test.
* testsuite/binutils-all/mips/mips-note-2r-n64.d: New test.
* testsuite/binutils-all/mips/mips.exp: Define `has_newabi'.
Run the new tests.
The pr20882 testcase fails on a number of targets that add attribute
or note sections to object files, and the default linker script says
those sections should be kept. This patch changes --gc-sections to
drop debug and special sections like .comment when no SEC_ALLOC
section in an object file is kept. The assumption is that debug
sections are describing code and data that will become part of the
final image in memory.
* elflink.c (_bfd_elf_gc_mark_extra_sections): Don't keep
debug and special sections when no non-note alloc sections in an
object are kept.
If a debug section is referenced by a kept debug section, it should
also be kept.
Some targets, like mips, keep input files when there are some special
sections, like .gnu.attributes, even if input file is unused otherwise.
In this case, all debug sections are kept. The new test will fail on
such targets. We can either fix those targets or XFAIL the test.
bfd/
PR ld/20882
* elflink.c (elf_gc_mark_debug_section): New function.
(_bfd_elf_gc_mark_extra_sections): Mark any debug sections
referenced by kept debug sections.
ld/
PR ld/20882
* testsuite/ld-gc/gc.exp: Run pr20882.
* testsuite/ld-gc/pr20882.d: New file.
* testsuite/ld-gc/pr20882a.s: Likewise.
* testsuite/ld-gc/pr20882b.s: Likewise.
* testsuite/ld-gc/pr20882c.s: Likewise.
dynamic_ref_after_ir_def is a little odd compared to other symbol
flags in that as the name suggests, it is set only for certain
references after a definition. It turns out that setting a flag for
any non-ir reference from a dynamic object can be used to solve the
problem for which this flag was invented, which I think is a cleaner.
This patch does that, and sets non_ir_ref only for regular object
references.
include/
* bfdlink.h (struct bfd_link_hash_entry): Update non_ir_ref
comment. Rename dynamic_ref_after_ir_def to non_ir_ref_dynamic.
ld/
* plugin.c (is_visible_from_outside): Use non_ir_ref_dynamic.
(plugin_notice): Set non_ir_ref for references from regular
objects, non_ir_ref_dynamic for references from dynamic objects.
bfd/
* elf64-ppc.c (add_symbol_adjust): Transfer non_ir_ref_dynamic.
* elflink.c (elf_link_add_object_symbols): Update to use
non_ir_ref_dynamic.
(elf_link_input_bfd): Test non_ir_ref_dynamic in addition to
non_ir_ref.
* linker.c (_bfd_generic_link_add_one_symbol): Likewise.
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
If there are more than GNU property note in an input, we should merge
X86_ISA_1_USED and X86_ISA_1_NEEDED properties.
bfd/
* elf32-i386.c (elf_i386_parse_gnu_properties): Merge
GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED
properties.
* elf64-x86-64.c (elf_x86_64_parse_gnu_properties): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Run property-x86-3.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/property-x86-3.d: New file.
* testsuite/ld-i386/property-x86-3.s: Likewise.
* testsuite/ld-x86-64/property-x86-3.d: Likewise.
* testsuite/ld-x86-64/property-x86-3.s: Likewise.
Rename .plt.bnd to .plt.sec to indicate that this is used as the second
PLT section. There is no change in run-time behavior. We also scan the
.plt.sec section to synthesize PLT symbols.
bfd/
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Rename plt_bnd
to plt_second.
(elf_x86_64_link_hash_table): Rename plt_bnd/plt_bnd_eh_frame
to plt_second/plt_second_eh_frame.
(elf_x86_64_link_hash_newfunc): Updated.
(elf_x86_64_allocate_dynrelocs): Likewise.
(elf_x86_64_size_dynamic_sections): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_finish_dynamic_symbol): Likewise.
(elf_x86_64_finish_dynamic_sections): Likewise.
(elf_x86_64_plt_type): Rename plt_bnd to plt_second.
(elf_x86_64_get_synthetic_symtab): Updated. Also scan the
.plt.sec section.
(elf_backend_setup_gnu_properties): Updated. Create the
.plt.sec section instead of the .plt.sec section.
ld/
* emulparams/elf_x86_64.sh (TINY_READONLY_SECTION): Replace
.plt.bnd with .plt.sec.
* testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1.d: Likewise.
* testsuite/ld-x86-64/mpx3.dd: Likewise.
* testsuite/ld-x86-64/mpx3n.dd: Likewise.
* testsuite/ld-x86-64/mpx4.dd: Likewise.
* testsuite/ld-x86-64/mpx4n.dd: Likewise.
* testsuite/ld-x86-64/plt-main-bnd-now.rd: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038b.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
This patch partially reverses:
commit 25070364b0
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sat May 16 07:00:21 2015 -0700
Don't generate PLT relocations for now binding
to support LD_AUDIT and LD_PROFILE with -z now. If there is an existing
GOT relocation, it is still used to avoid PLT relocation against the same
function symbol.
bfd/
* elf32-i386.c (elf_i386_allocate_dynrelocs): Partially revert
commit 25070364b0.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewse.
ld/
* testsuite/ld-i386/plt-pic2.dd: Updated.
* testsuite/ld-i386/plt2.dd: Likewise.
* testsuite/ld-i386/plt2.rd: Likewise.
* testsuite/ld-i386/pr17689now.rd: Likewise.
* testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-16-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise.
* testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/plt2.dd: Likewise.
* testsuite/ld-x86-64/plt2.rd: Likewise.
* testsuite/ld-x86-64/pr17689now.rd: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
This patch fixes the deletion of relocations in BFD sections in
sparc64 targets.
A specialized `_bfd_set_reloc' function is provided that updates the
internal canon_reloc_count(sec) counter instead of sec->reloc_count.
Additionally, the `write_relocs' callback in elf64-sparc is adapted to
use the canon_reloc_count to traverse `sec->orelocation'.
Tested in sparc64-linux-gnu targets.
Fixes an existing failure in the merge-notes objcopy test.
No regressions.
bfd/ChangeLog:
2017-05-10 Jose E. Marchesi <jose.marchesi@oracle.com>
* elf64-sparc.c (elf64_sparc_set_reloc): New function.
(bfd_elf64_set_reloc): Define.
(elf64_sparc_write_relocs): Use `canon_reloc_count'.
This patch adds a new entry point to the BFD_JUMP_TABLE_RELOCS. The
previous common implementation `bfd_set_reloc', in bfd/bfd.c, has been
moved to bfd/reloc.c with the name `_bfd_generic_set_reloc', and all
BFD targets has been adapted to use it.
This patch doesn't introduce any change on functionality, but prepares
the ground for further work.
bfd/ChangeLog:
2017-05-10 Jose E. Marchesi <jose.marchesi@oracle.com>
* targets.c (BFD_JUMP_TABLE_RELOCS): Add NAME##_set_reloc.
(struct bfd_target): New field _bfd_set_reloc.
* bfd.c (bfd_set_reloc): Call backend _set_bfd.
* reloc.c (_bfd_generic_set_reloc): New function.
* coffcode.h (coff_set_reloc): Define to _bfd_generic_set_reloc.
* nlm-target.h (nlm_set_reloc): Likewise.
* coff-rs6000.c (_bfd_xcoff_set_reloc): Likewise.
* aout-tic30.c (MY_set_reloc): Likewise.
* aout-target.h (MY_set_reloc): Likewise.
* elfxx-target.h (bfd_elfNN_set_reloc): Likewise.
* coff-alpha.c (_bfd_ecoff_set_reloc): Likewise.
* mach-o-target.c (bfd_mach_o_set_reloc): Likewise.
* vms-alpha.c (alpha_vms_set_reloc): Likewise.
* aout-adobe.c (aout_32_set_reloc): Likewise.
* bout.c (b_out_set_reloc): Likewise.
* coff-mips.c (_bfd_ecoff_set_reloc): Likewise.
* i386os9k.c (aout_32_set_reloc): Likewise.
* ieee.c (ieee_set_reloc): Likewise.
* oasys.c (oasys_set_reloc): Likewise.
* som.c (som_set_reloc): Likewise.
* versados.c (versados_set_reloc): Likewise.
* coff64-rs6000.c (rs6000_xcoff64_vec): Add
_bfd_generic_set_reloc.
(rs6000_xcoff64_aix_vec): LIkewise.
* libbfd.c (_bfd_norelocs_set_reloc): New function.
* libbfd-in.h: Prototype for _bfd_norelocs_set_reloc.
* i386msdos.c (msdos_set_reloc): Define to
_bfd_norelocs_set_reloc.
* elfcode.h (elf_set_reloc): Define.
* bfd-in2.h: Regenerated.
When -z bndplt is used, we must use the .plt.bnd entry for IFUNC function
address.
bfd/
PR ld/21481
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Use .plt.bnd
for IFUNC function address.
ld/
PR ld/21481
* testsuite/ld-x86-64/pr21481a.c: New file.
* testsuite/ld-x86-64/pr21481b.S: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/21481 tests.
PR ld/21458
* elf32-arm.c (elf32_arm_final_link_relocate): Set the bottom bit
of the value when resolving a R_ARM_THM_ALU_PREL_11_0 relocation
and the destination is a Thumb symbol.
On x86-64, the procedure linkage table (PLT) is used to
1. Call external function.
2. Call internal IFUNC function. The best implementation is selected
for the target processor at run-time.
3. Act as the canonical function address.
4. Support LD_AUDIT to audit external function calls.
5. Support LD_PROFILE to profile external function calls.
PLT looks like:
PLT0: push GOT[1]
jmp *GOT[2]
nop
PLT1: jmp *GOT[name1_index]
push name1_reloc_index
jmp PLT0
GOT is an array of addresses. Initially the GOT entry of name1 is
filled with the address of the "push name1_reloc_index" instruction.
The function, name1, is called via "jmp *GOT[name1]" in the PLT entry.
Even when lazy binding is disabled by "-z now", the PLT0 entry may
still be used with LD_AUDIT or LD_PROFILE if PLT entry is used for
canonical function address.
When linker is invoked with "-z bndplt", a different PLT layout in .plt
is used:
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
PLT1: push name1_reloc_index
bnd jmp PLT0
nop
together with a second PLT section, .pl.bnd:
PLT1: bnd jmp *GOT[name1_index]
nop
where the GOT entry of name1 is filled with the address of the push
instruction of the corresponding entry in .plt.
1. With lazy binding, when the external function, name1, is called the
first time, dynamic linker is called via PLT0 to update GOT[name1_index]
with the actual address of name1 and transfers control to name1
afterwards.
2. PLT is also used to call a local IFUNC function, name1, run-time
loader updates GOT[name1_index] when loading the module.
This patch
1. Remove PLT layout configurations from x86-64 backend_data.
2. Add generic, lay and non-lazy PLT layout configurations to x86-64
link_hash_table. Generic PLT layout includes the PLT entry templates,
information how to update the first instruction in PLT and PLT eh_frame
informaton, which are initialized in x86-64 setup_gnu_properties, based
on "-z bndplt" and target selection. PLT section alignment is also set
to PLT entry size for non-NaCl target.
3. Remove elf_x86_64_create_dynamic_sections. create_dynamic_sections
isn't always called, but GOT relocations need GOT relocations. Instead,
create all x86-64 specific dynamic sections with alignment to their entry
size in x86-64 setup_gnu_properties, which initializes elf.dynobj, so
that x86-64 check_relocs can be simplified.
4. Rewrite elf_x86_64_get_synthetic_symtab to check PLT sections against
all dynamic relocations to support both lazy and non-lazy PLTs.
There is no change in PLT. The only externally visible change is the
improvement of synthetic PLT symbols for .plt.got.
bfd/
* elf64-x86-64.c (PLT_ENTRY_SIZE): Renamed to ...
(LAZY_PLT_ENTRY_SIZE): This.
(NON_LAZY_PLT_ENTRY_SIZE): New.
(elf_x86_64_plt0_entry): Renamed to ...
(elf_x86_64_lazy_plt0_entry): This.
(elf_x86_64_plt_entry): Renamed to ...
(elf_x86_64_lazy_plt_entry): This.
(elf_x86_64_bnd_plt0_entry): Renamed to ...
(elf_x86_64_lazy_bnd_plt0_entry): This.
(elf_x86_64_legacy_plt_entry): Removed.
(elf_x86_64_bnd_plt_entry): Renamed to ...
(elf_x86_64_lazy_bnd_plt_entry): This.
(elf_x86_64_legacy_plt2_entry): Renamed to ...
(elf_x86_64_non_lazy_plt_entry): This.
(elf_x86_64_bnd_plt2_entry): Renamed to ...
(elf_x86_64_non_lazy_bnd_plt_entry): This.
(elf_x86_64_eh_frame_plt): Renamed to ...
(elf_x86_64_eh_frame_lazy_plt): This.
(elf_x86_64_eh_frame_bnd_plt): Renamed to ...
(elf_x86_64_eh_frame_lazy_bnd_plt): This.
(elf_x86_64_eh_frame_plt_got): Renamed to ...
(elf_x86_64_eh_frame_non_lazy_plt): This.
(elf_x86_64_lazy_plt_layout): New.
(elf_x86_64_non_lazy_plt_layout): Likewise.
(elf_x86_64_plt_layout): Likewise.
(elf_x86_64_backend_data): Remove PLT layout information. Add
os for target system.
(GET_PLT_ENTRY_SIZE): Removed.
(elf_x86_64_lazy_plt): New.
(elf_x86_64_non_lazy_plt): Likewise.
(elf_x86_64_lazy_bnd_plt): Likewise.
(elf_x86_64_non_lazy_bnd_plt): Likewise.
(elf_x86-64_arch_bed): Updated.
(elf_x86_64_link_hash_table): Add plt, lazy_plt and non_lazy_plt.
(elf_x86_64_create_dynamic_sections): Removed.
(elf_x86_64_check_relocs): Don't check elf.dynobj. Don't call
_bfd_elf_create_ifunc_sections nor _bfd_elf_create_got_section.
(elf_x86-64_adjust_dynamic_symbol): Updated.
(elf_x86_64_allocate_dynrelocs): Updated. Pass 0 as PLT header
size to _bfd_elf_allocate_ifunc_dyn_relocs and don't allocate
size for PLT0 if there is no PLT0. Get plt_entry_size from
non_lazy_plt for non-lazy PLT entries.
(elf_x86_64_size_dynamic_sections): Updated. Get plt_entry_size
from non_lazy_plt for non-lazy PLT entries.
(elf_x86-64_relocate_section): Updated. Properly get PLT index
if there is no PLT0.
(elf_x86_64_finish_dynamic_symbol): Updated. Fill the first slot
in the PLT entry with generic PLT layout. Fill the non-lazy PLT
entries with non-lazy PLT layout. Don't fill the second and third
slots in the PLT entry if there is no PLT0.
(elf_x86_64_finish_dynamic_sections): Updated. Don't fill PLT0
if there is no PLT0. Set sh_entsize on the .plt.got section.
(compare_relocs): New.
(elf_x86_64_plt_type): Likewise.
(elf_x86_64_plt): Likewise.
(elf_x86_64_nacl_plt): New. Forward declaration.
(elf_x86_64_get_plt_sym_val): Removed.
(elf_x86_64_get_synthetic_symtab): Rewrite to check PLT sections
against all dynamic relocations.
(elf_x86_64_link_setup_gnu_properties): New function.
(elf_backend_create_dynamic_sections): Updated.
(elf_backend_setup_gnu_properties): New.
(elf_x86_64_nacl_plt): New.
(elf_x86_64_nacl_arch_bed): Updated.
ld/
* testsuite/ld-ifunc/ifunc-16-x86-64-now.d: New file.
* testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise.
* testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/mpx3n.dd: Likewise.
* testsuite/ld-x86-64/mpx4n.dd: Likewise.
* testsuite/ld-x86-64/plt-main-bnd-now.rd: Likewise.
* testsuite/ld-x86-64/plt2.dd: Likewise.
* testsuite/ld-x86-64/plt2.rd: Likewise.
* testsuite/ld-x86-64/plt2.s: Likewise.
* testsuite/ld-x86-64/pr20830a-now.d: Likewise.
* testsuite/ld-x86-64/pr20830b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038a-now.d: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
* testsuite/ld-x86-64/load1b-nacl.d: Updated.
* testsuite/ld-x86-64/load1b.d: Likewise.
* testsuite/ld-x86-64/plt-main-bnd.dd: Likewise.
* testsuite/ld-x86-64/pr20253-1h.d: Likewise.
* testsuite/ld-x86-64/pr20830a.d: Update the .plt.got section
with func@plt.
* testsuite/ld-x86-64/pr20830b.d: Likewise.
* testsuite/ld-x86-64/pr21038a.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
* testsuite/ld-x86-64/mpx.exp: Add some -z now tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
This fixes a problem with a missing R_390_64 reloc against .data for a
function pointer to an ifunc function.
No regressions on s390x.
Pushed to mainline.
bfd/ChangeLog:
2017-05-08 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf-s390-common.c: Don't check non_got_ref flag.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elf64-s390.c (elf_s390_relocate_section): Likewise.
On i386, the procedure linkage table (PLT) is used to
1. Call external function.
2. Call internal IFUNC function. The best implementation is selected
for the target processor at run-time.
3. Act as the canonical function address.
4. Support LD_AUDIT to audit external function calls.
5. Support LD_PROFILE to profile external function calls.
PLT looks like:
PLT0: push GOT[1]
jmp *GOT[2]
nop
PLT1: jmp *GOT[name1_index]
push name1_reloc_index
jmp PLT0
GOT is an array of addresses. Initially the GOT entry of name1 is
filled with the address of the "push name1_reloc_index" instruction.
The function, name1, is called via "jmp *GOT[name1]" in the PLT entry.
Even when lazy binding is disabled by "-z now", the PLT0 entry may
still be used with LD_AUDIT or LD_PROFILE if PLT entry is used for
canonical function address.
1. With lazy binding, when the external function, name1, is called the
first time, dynamic linker is called via PLT0 to update GOT[name1_index]
with the actual address of name1 and transfers control to name1
afterwards.
2. PLT is also used to call a local IFUNC function, name1, run-time
loader updates GOT[name1_index] when loading the module.
This patch
1. Remove PLT layout configurations from i386 backend_data.
2. Add generic, lay and non-lazy PLT layout configurations to i386
link_hash_table. Generic PLT layout includes the PLT entry templates,
information how to update the first instruction in PLT and PLT eh_frame
informaton, which are initialized in i386 setup_gnu_properties, based
on PIC and target selection. PLT section alignment is also set to PLT
entry size for non-NaCl/VxWorks target.
3. Remove elf_i386_create_dynamic_sections. create_dynamic_sections
isn't always called, but GOT relocations need GOT relocations. Instead,
create all i386 specific dynamic sections in i386 setup_gnu_properties,
which initializes elf.dynobj, so that i386 check_relocs can be simplified.
4. Rewrite elf_i386_get_synthetic_symtab to check PLT sections against
all dynamic relocations to support both lazy and non-lazy PLTs.
bfd/
* elf32-i386.c (PLT_ENTRY_SIZE): Renamed to ...
(LAZY_PLT_ENTRY_SIZE): This.
(NON_LAZY_PLT_ENTRY_SIZE): New.
(elf_i386_plt0_entry): Renamed to ...
(elf_i386_lazy_plt0_entry): This.
(elf_i386_plt_entry): Renamed to ...
(elf_i386_lazy_plt_entry): This.
(elf_i386_pic_plt0_entry): Renamed to ...
(elf_i386_pic_lazy_plt0_entry): This.
(elf_i386_pic_plt_entry): Renamed to ...
(elf_i386_pic_lazy_plt_entry): This.
(elf_i386_got_plt_entry): Renamed to ...
(elf_i386_non_lazy_plt_entry): This.
(elf_i386_pic_got_plt_entry): Renamed to ...
(elf_i386_pic_non_lazy_plt_entry): This.
(elf_i386_eh_frame_plt): Renamed to ...
(elf_i386_eh_frame_lazy_plt): This.
(elf_i386_eh_frame_plt_got): Renamed to ...
(elf_i386_eh_frame_non_lazy_plt): This.
(elf_i386_plt_layout): Renamed to ...
(elf_i386_lazy_plt_layout): This. Remove eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_i386_non_lazy_plt_layout): New.
(elf_i386_plt_layout): Likewise.
(elf_i386_non_lazy_plt): Likewise.
(GET_PLT_ENTRY_SIZE): Removed.
(elf_i386_plt): Renamed to ...
(elf_i386_lazy_plt): This.
(elf_i386_backend_data): Remove plt. Rename is_vxworks to os.
(elf_i386_arch_bed): Updated.
(elf_i386_link_hash_table): Add plt, lazy_plt and non_lazy_plt.
(elf_i386_create_dynamic_sections): Removed.
(elf_i386_check_relocs): Don't check elf.dynobj. Don't call
_bfd_elf_create_ifunc_sections nor _bfd_elf_create_got_section.
(elf_i386_adjust_dynamic_symbol): Updated.
(elf_i386_allocate_dynrelocs): Updated. Pass 0 as PLT header
size to _bfd_elf_allocate_ifunc_dyn_relocs and don't allocate
size for PLT0 if there is no PLT0.
(elf_i386_size_dynamic_sections): Updated. Check whether GOT
output section is discarded only if GOT isn't empty.
(elf_i386_relocate_section): Updated. Properly get PLT index
if there is no PLT0.
(elf_i386_finish_dynamic_symbol): Updated. Don't fill the
second and third slots in the PLT entry if there is no PLT0.
(elf_i386_finish_dynamic_sections): Updated. Don't fill PLT0
if there is no PLT0. Set sh_entsize on the .plt.got section.
(elf_i386_nacl_plt): Forward declaration.
(elf_i386_get_plt_sym_val): Removed.
(elf_i386_get_synthetic_symtab): Rewrite to check PLT sections
against all dynamic relocations.
(elf_i386_link_setup_gnu_properties): New function.
(elf_backend_create_dynamic_sections): Updated.
(elf_backend_setup_gnu_properties): New.
(elf_i386_nacl_plt): Updated.
(elf_i386_nacl_arch_bed): Likewise.
(elf_i386_vxworks_arch_bed): Likewise.
ld/
* testsuite/ld-i386/i386.exp: Add some -z now tests.
* testsuite/ld-i386/plt-pic2.dd: New file.
* testsuite/ld-i386/plt2.dd: Likewise.
* testsuite/ld-i386/plt2.rd: Likewise.
* testsuite/ld-i386/plt2.s: Likewise.
* testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386-now.d: Likewise.
* testsuite/ld-i386/pr20830.d: Update the .plt.got section
with func@plt.
For ELF targets --out-implib currently generates an executable file
(e_type is ET_EXEC) despite the file being expected to be linked against
some other object file to make an executable later. It seems therefore
more sensible to make the import library a relocatable object file
(e_type set to ET_REL).
Incidentally, as dicted by requirement 8 of
"ARM v8-M Security Extensions: Requirements on Development Tools"
(document ARM-ECM-0359818) version 1.0, import libraries generated when
using --cmse-implib *must* be relocatable object file so this commit
also adds an assert there in case the type of ELF import library is
changed again in the future.
2017-05-08 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elflink.c (elf_output_implib): Remove executable flag from import
library bfd.
* elf32-arm.c (elf32_arm_filter_implib_symbols): Assert that the import
library is a relocatable object file.
ld/
* testsuite/ld-arm/arm-elf.exp
(Secure gateway import library generation): Check e_type field
of import library and executable produced.
* testsuite/ld-arm/cmse-implib.type: Expectations for e_type field.
Fix a host of problems related to adjustment of
symbol values and sizes when relaxing for avr.
1. Adjust symbol size first before adjusting symbol
value. Otherwise, a symbol whose value just got adjusted to the
relaxed address also ends up getting resized. See pr21404-1.s.
2. Reduce symbol sizes only if their span is below an
alignment boundary. Otherwise, the size gets decremented once when the
actual instruction is relaxed and padding bytes are added, and again
when the padding bytes are deleted (if padding ends up being unnecessary).
pr21404-2.s addresses that, and this bug is really the root cause of PR21404.
3. Adjust all symbol values before an alignment boundary.
Previous code did not adjust symbol values if they fell in the
would-be padded area, resulting in incorrect symbol values in some
cases (see pr21404-3.s).
4. Increase symbol sizes if alignment directives require so.
As pr21404-4.s shows
.global nonzero_sym
L1:
jmp L1
nonzero_sym:
nop
nop
.p2align 2
.size nonzero_sym, .-nonzero_sym
The two nops satisfy the 4 byte alignment at assembly time and
therefore the size of nonzero_sym is 4. Relaxation shortens
the 4 byte jmp to a 2 byte rjmp, and to satisfy 4 byte alignment
the code places 2 extra padding bytes after the nops, increasing
nonzero_sym's size by 2. This wasn't handled before.
If the assembly code does not have any align directives, then the
boundary is the section size, and symbol values and sizes == boundary
should also get adjusted. To handle that case, add a did_pad variable
and use that to determine whether it should use < boundary or <= boundary.
Also get rid of reloc_toaddr, which is now redundant. toaddr is now not
adjusted to handle the above case - the newly added
did_pad variable does the job.
pr21404-{5,6,7,8} are the same testcases written for local symbols, as
the code handles them slightly differently.
We've been telling people that the riscv32-* and riscv64-* toolchains
are exactly the same, but it turns out we were lying: the riscv32-* BFD
doesn't handle 64-bit objects. This fixes that difference, so the ports
are actually the same.
bfd/ChangeLog
2017-05-01 Palmer Dabbelt <palmer@dabbelt.com>
* config.bfd (riscv32-*): Enable rv64.
The commit to "Always descend into output section statements in
lang_do_assignments" meant that linker script symbols were not
bfd_link_hash_new when ld called bfd_elf_record_link_assignment.
This patch corrects that problem by testing h->non_elf instead.
PR 21384
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Test h->non_elf
rather than h->root.type == bfd_link_hash_new.
(bfd_elf_record_link_assignment): Similarly, call
bfd_elf_link_mark_dynamic_symbol when h->non_elf.
The existing reloc offset range tests didn't catch small negative
offsets less than the size of the reloc field.
PR 21432
* reloc.c (reloc_offset_in_range): New function.
(bfd_perform_relocation, bfd_install_relocation): Use it.
(_bfd_final_link_relocate): Likewise.
Since the GOT procedure linkage table is supported only if plt_got
isn't NULL, we need to check plt_got before using it.
* elf32-i386.c (elf_i386_allocate_dynrelocs): Check plt_got
before using .plt.got.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
Use
if (htab->elf.splt->size == 0)
htab->elf.splt->size = GET_PLT_ENTRY_SIZE (output_bfd);
instead of
if (htab->elf.splt->size == 0)
htab->elf.splt->size += GET_PLT_ENTRY_SIZE (output_bfd);
* elf64-x86-64.c (elf_x86_64_size_dynamic_sections): Use "="
instead of "+=" to update 0.
This patch creates dynamic sections in i386/x86-64 create_dynamic_sections
instead of creating them on demend. Linker will strip them if they are
empty. It changes order in x86-64 .eh_frame section. The extra DW_CFA_nop
paddings is due to
https://sourceware.org/bugzilla/show_bug.cgi?id=21441
bfd/
* elf32-i386.c (elf_i386_create_dynamic_sections): Create the
.plt.got section here.
(elf_i386_check_relocs): Don't create the .plt.got section.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Create
the .plt.got and .plt.bnd sections here.
(elf_x86_64_check_relocs): Don't create the .plt.got nor
.plt.bnd sections.
ld/
* testsuite/ld-x86-64/pr21038a.d: Update DW_CFA_nop paddings
in .eh_frame section.
* testsuite/ld-x86-64/pr21038c.d: Update .eh_frame order.
has_bnd_reloc was added to elf_x86_64_link_hash_entry track BND
relocations by
commit 0ff2b86e7c
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Nov 20 09:01:04 2013 -0800
Create the second PLT for BND relocations
Since BND relocations have been deprecated by
commit d258b82828
Author: Igor Zamyatin <igor.zamyatin@intel.com>
Date: Tue Nov 18 10:52:36 2014 +0300
Add -z bndplt to generate BND prefix in PLT entries
This patch removes has_bnd_reloc from elf_x86_64_link_hash_entry and
checks bndplt instead of has_bnd_reloc.
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Remove
has_bnd_reloc.
(elf_x86_64_link_hash_newfunc): Don't clear has_bnd_reloc.
(elf_x86_64_copy_indirect_symbol): Don't copy has_bnd_reloc.
(elf_x86_64_check_relocs): Don't set has_bnd_reloc.
(elf_x86_64_finish_dynamic_symbol): Check bndplt instead of
has_bnd_reloc.
Remove has_bnd_reloc
Change setup_gnu_properties to return the first relocatable ELF input
with GNU properties so that a backend can make decision based on GNU
properties.
* elf-bfd.h (elf_backend_data): Change setup_gnu_properties
to return bfd *.
(_bfd_elf_link_setup_gnu_properties): Return bfd *.
* elf-properties.c (_bfd_elf_link_setup_gnu_properties): Return
the first relocatable ELF input with GNU properties.
Experimental support for moving symbols defined in .eh_frame as their
CIEs/FDEs are edited or merged.
* elf-bfd.h (struct eh_cie_fde): Add aug_str_len and aug_data_len.
(_bfd_elf_adjust_eh_frame_global_symbol): Declare.
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Set aug_str_len and
aug_data_len.
(offset_adjust): New function.
(_bfd_elf_adjust_eh_frame_global_symbol): Likewise.
(adjust_eh_frame_local_symbols): Likewise.
(_bfd_elf_discard_section_eh_frame): Call adjust_eh_frame_local_symbols
after changing anything. Return true if anything changed.
* elflink.c (bfd_elf_discard_info): If .eh_frame changed, call
_bfd_elf_adjust_eh_frame_global_symbol for globals.
This is really just cosmetic, but it does protect a little from
accidentally reading a stale value.
* elflink.c (_bfd_elf_link_hash_hide_symbol): Clear dynstr_index
when force_local.
This patch fixes a number of cases where -z nodynamic-undefined-weak
was not effective in preventing dynamic relocations or linkage stubs.
* elf32-ppc.c (UNDEFWEAK_NO_DYNAMIC_RELOC): Define.
(ppc_elf_select_plt_layout, ppc_elf_tls_setup): Use it.
(ppc_elf_adjust_dynamic_symbol, allocate_dynrelocs): Likewise.
(ppc_elf_relocate_section): Likewise. Delete silly optimisation
for undef and undefweak dyn_relocs.
* elf64-ppc.c (UNDEFWEAK_NO_DYNAMIC_RELOC): Define.
(ppc64_elf_adjust_dynamic_symbol, ppc64_elf_tls_setup): Use it.
(allocate_got, allocate_dynrelocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
x86, PLT relocation may contain R_386_TLS_DESC or R_X86_64_TLSDESC
even though there is no real PLT. We need to add DT_PLTRELSZ, DT_PLTREL
and DT_JMPREL if there is a .rel.plt/.rela.plt section.
bfd/
* elf32-i386.c (elf_i386_size_dynamic_sections): Alwasys add
DT_PLTRELSZ, DT_PLTREL and DT_JMPREL for .rel.plt section.
* elf64-x86-64.c (elf_x86_64_size_dynamic_sections): Alwasys
add DT_PLTRELSZ, DT_PLTREL and DT_JMPREL for .rela.plt section.
ld/
* testsuite/ld-i386/tlsdesc2.d: New test.
* testsuite/ld-x86-64/tlsdesc2.d: Likewise.
Complement commit e17b0c351f ("MIPS/BFD: Respect the ELF gABI dynamic
symbol table sort requirement") and correct an inconsistency in dynamic
symbol accounting data causing an assertion failure in the MIPS backend:
ld: BFD (GNU Binutils) 2.28.51.20170330 assertion fail
../../binutils-gdb/bfd/elfxx-mips.c:3860
in the course of making a GOT entry in a static binary to satisfy a GOT
relocation present in input, due to the local dynamic symbol count not
having been established.
To do so let backends request `_bfd_elf_link_renumber_dynsyms' to be
always called, rather than where a dynamic binary is linked only, and
then make this request in the MIPS backend.
bfd/
PR ld/21334
* elf-bfd.h (elf_backend_data): Add `always_renumber_dynsyms'
member.
* elfxx-target.h [!elf_backend_always_renumber_dynsyms]
(elf_backend_always_renumber_dynsyms): Define.
(elfNN_bed): Initialize `always_renumber_dynsyms' member.
* elfxx-mips.h (elf_backend_always_renumber_dynsyms): Define.
* elflink.c (bfd_elf_size_dynamic_sections): Also call
`_bfd_elf_link_renumber_dynsyms' if the backend has requested
it.
(bfd_elf_size_dynsym_hash_dynstr): Likewise.
ld/
PR ld/21334
* testsuite/ld-mips-elf/pr21334.dd: New test.
* testsuite/ld-mips-elf/pr21334.gd: New test.
* testsuite/ld-mips-elf/pr21334.ld: New test linker script.
* testsuite/ld-mips-elf/pr21334.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Consistently call `_bfd_elf_link_renumber_dynsyms' only if linking a
dynamic binary, complementing code in `bfd_elf_size_dynsym_hash_dynstr'
and commit ccabcbe51e ("New attempt at fixing MIPS --gc-sections et
al."), <https://sourceware.org/ml/binutils/2005-08/msg00258.html>.
bfd/
* elflink.c (bfd_elf_size_dynamic_sections): Only call
`_bfd_elf_link_renumber_dynsyms' after section GC if dynamic
sections have been created.
Force symbol dynamic if it isn't undefined weak. Generate relative
relocation for GOT reference against non-dynamic symbol in PIC to
avoid unnecessary dynamic symbols.
bfd/
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Add
no_finish_dynamic_symbol.
(elf_x86_64_link_hash_newfunc): Set no_finish_dynamic_symbol to
0.
(elf_x86_64_allocate_dynrelocs): If a symbol isn't undefined
weak symbol, don't make it dynamic.
(elf_x86_64_relocate_section): If a symbol isn't dynamic in PIC,
set no_finish_dynamic_symbol and generate R_X86_64_RELATIVE
relocation for GOT reference.
(elf_x86_64_finish_dynamic_symbol): Abort if
no_finish_dynamic_symbol isn't 0.
ld/
* testsuite/ld-x86-64/no-plt.exp: Also check no-plt-1e.nd.
* testsuite/ld-x86-64/no-plt-1e.nd: New file.
Force symbol dynamic if it isn't undefined weak. Generate R_386_RELATIVE
relocation for R_386_GOT32 relocation against non-dynamic symbol in PIC.
PR ld/21402
* elf32-i386.c (elf_i386_allocate_dynrelocs): If a symbol isn't
undefined weak symbol, don't make it dynamic.
(elf_i386_relocate_section): If a symbol isn't dynamic in PIC,
set no_finish_dynamic_symbol and generate R_386_RELATIVE
relocation for R_386_GOT32.
commit a27e437177
Author: Roland McGrath <roland@gnu.org>
Date: Thu Jul 28 22:35:15 2011 +0000
BFD vector for elf32-i386-nacl:
changed ELF_MAXPAGESIZE to 0x10000 for VxWorks. This patch fixes it
and updated testsuite/ld-i386/vxworks2.sd to add space for program
headers.
bfd/
PR ld/21425
* elf32-i386.c (ELF_MAXPAGESIZE): Set to 0x1000 for VxWorks.
ld/
PR ld/20815
* testsuite/ld-i386/vxworks2.sd: Add space for program headers.
This patch fixes an assumption made by code that runs for objcopy and
strip, that SHT_REL/SHR_RELA sections are always named starting with a
.rel/.rela prefix. I'm also modifying the interface for
elf_backend_get_reloc_section, so any backend function just needs to
handle name mapping.
PR 21412
* elf-bfd.h (struct elf_backend_data <get_reloc_section>): Change
parameters and comment.
(_bfd_elf_get_reloc_section): Delete.
(_bfd_elf_plt_get_reloc_section): Declare.
* elf.c (_bfd_elf_plt_get_reloc_section, elf_get_reloc_section):
New functions. Don't blindly skip over assumed .rel/.rela prefix.
Extracted from..
(_bfd_elf_get_reloc_section): ..here. Delete.
(assign_section_numbers): Call elf_get_reloc_section.
* elf64-ppc.c (elf_backend_get_reloc_section): Define.
* elfxx-target.h (elf_backend_get_reloc_section): Update.
GOT reference to global symbol in PIE will lead to dynamic symbol. It
becomes a problem when "time" or "times" is defined as a variable in
an executable, clashing with functions of the same name in libc. If
a symbol isn't undefined weak symbol, don't make it dynamic in PIE and
generate R_386_RELATIVE relocation.
bfd/
PR ld/21402
* elf32-i386.c (elf_i386_link_hash_entry): Add
no_finish_dynamic_symbol.
(elf_i386_link_hash_newfunc): Set no_finish_dynamic_symbol to 0.
(elf_i386_allocate_dynrelocs): If a symbol isn't undefined weak
symbol, don't make it dynamic in PIE.
(elf_i386_relocate_section): If a symbol isn't dynamic in PIE,
set no_finish_dynamic_symbol and generate R_386_RELATIVE
relocation for R_386_GOT32
(elf_i386_finish_dynamic_symbol): Abort if no_finish_dynamic_symbol
isn't 0.
ld/
PR ld/21402
* testsuite/ld-elf/indirect.exp: Don't skip PIE indirect5 and
indirect6 tests on i386.
When -static -E/--dynamic-list are passed to linker, linker may create
executable with dynamic sections which aren't supported by run-time.
We require --no-dynamic-linker together with -static -E/--dynamic-list
before adding dynamic symbol table to static executable.
bfd/
PR ld/19617
PR ld/21086
* elflink.c (elf_link_add_object_symbols): Require
--no-dynamic-linker with -E/--dynamic-list when creating
dynamic sections.
ld/
PR ld/19617
PR ld/21086
* testsuite/ld-elf/pr19617a.d: Pass --no-dynamic-linker to ld.
* testsuite/ld-elf/pr19617b.d: Likewise.
* testsuite/ld-elf/pr19617c.d: Likewise.
*testsuite/ld-i386/pr19636-4d.d: Likewise.
* testsuite/ld-elf/readelf.exp: Pass --no-dynamic-linker to ld
with --export-dynamic.
* testsuite/ld-elf/shared.exp: Pass --no-dynamic-linker to ld
with -E.
Do not require forced local (STB_LOCAL) symbols to have a definition in
a regular file to be considered to resolve local to the current module,
matching `elf_link_renumber_local_hash_table_dynsyms'. In the absence
of a regular definition any reference to a STB_LOCAL symbol will have to
be garbage collected along with the undefined symbol itself, or the link
will eventually fail. Either way the symbol concerned is not going to
be external.
bfd/
* elflink.c (_bfd_elf_symbol_refs_local_p): Always return TRUE
if forced local.
Move the comment about dynamic symbol sorting next to where it happens.
bfd/
* elfxx-mips.c (_bfd_mips_elf_final_link): Reorder comment about
dynamic symbol sorting.
We need to make an IR symbol visible if it is defined in an IR object
and referenced in a dynamic object. When --as-needed is used, since
linker removes the IR symbol reference of the dynamic object if the
dynamic object isn't needed in the first pass, the IR definition isn't
visible to the dynamic object even if the dynamic object becomes needed
in the second pass. Add dynamic_ref_after_ir_def to bfd_link_hash_entry
to track IR symbol which is defined in an IR object and later referenced
in a dynamic object. dynamic_ref_after_ir_def is preserved when restoring
the symbol table for unneeded dynamic object.
bfd/
PR ld/21382
* elflink.c (elf_link_add_object_symbols): Preserve
dynamic_ref_after_ir_def when restoring the symbol table for
unneeded dynamic object.
include/
PR ld/21382
* bfdlink.h (bfd_link_hash_entry): Add dynamic_ref_after_ir_def.
ld/
PR ld/21382
* plugin.c (is_visible_from_outside): Symbol may be visible
from outside if dynamic_ref_after_ir_def is set.
(plugin_notice): Set dynamic_ref_after_ir_def if the symbol is
defined in an IR object and referenced in a dynamic object.
* testsuite/ld-plugin/lto.exp: Run PR ld/21382 tests.
* testsuite/ld-plugin/pr21382a.c: New file.
* testsuite/ld-plugin/pr21382b.c: Likewise.
Since undefined IFUNC symbol is treated as normal FUNC symbol, don't
abort on undefined IFUNC symbol in the second PLT.
bfd/
PR ld/21401
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Don't abort
on on undefined IFUNC symbol in the second PLT.
ld/
PR ld/21401
* testsuite/ld-ifunc/ifunc.exp: Add a libtest-2-now.so test with
-z now.
-z nodynamic-undefined-weak is only implemented for x86. (The sparc
backend has some support code but doesn't enable the option by
including ld/emulparams/dynamic_undefined_weak.sh, and since the
support looks like it may be broken I haven't enabled it.) This patch
adds the complementary -z dynamic-undefined-weak, extends both options
to affect building of shared libraries as well as executables, and
adds support for the option on powerpc.
include/
* bfdlink.h (struct bfd_link_info <dynamic_undefined_weak>):
Revise comment.
bfd/
* elflink.c (_bfd_elf_adjust_dynamic_symbol): Hide undefweak
or make dynamic for info->dynamic_undefined_weak 0 and 1.
* elf32-ppc.c:Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard undef dyn_relocs when
not default visibility. Discard undef and undefweak
dyn_relocs earlier.
(ppc_elf_relocate_section): Adjust to suit.
* elf64-ppc.c: Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard them earlier.
ld/
* ld.texinfo (dynamic-undefined-weak): Document.
(nodynamic-undefined-weak): Document that this option now can
be used with shared libs.
* emulparams/dynamic_undefined_weak.sh: Support -z
dynamic-undefined-weak.
* emulparams/elf32ppccommon.sh: Include dynamic_undefined_weak.sh.
* testsuite/ld-undefined/weak-undef.exp (undef_weak_so),
(undef_weak_exe): New. Use them. Add -z dynamic-undefined-weak
and -z nodynamic-undefined-weak tests.
* Makefile.am: Update powerpc dependencies.
* Makefile.in: Regenerate.
commit 902e9fc76a
Author: Maciej W. Rozycki <macro@imgtec.com>
Date: Tue Feb 21 01:46:42 2017 +0000
PR ld/20828: Move symbol version processing ahead of GC symbol sweep
breaks version definition with --version-script --soname. This patch
fixes it by getting soname index before generating the version definition
section.
bfd/
PR ld/21389
* elflink.c (bfd_elf_size_dynamic_sections): Get soname index
before generating the version definition section.
ld/
PR ld/21389
* testsuite/ld-elf/pr21389.map: New file.
* testsuite/ld-elf/pr21389.s: Likewise.
* testsuite/ld-elf/pr21389a.d: Likewise.
* testsuite/ld-elf/pr21389b.d: Likewise.
* testsuite/ld-elf/pr21389c.d: Likewise.
We already handle the case of an object file first defining a symbol
that a later shared library also defines where the symbol types are
incompatible. This patch handles the reverse, when a later object
file defines an incompatible symbol defined by an earlier shared
library.
bfd/
* elflink.c (_bfd_elf_merge_symbol): Undo dynamic linking
state when a regular object file defines a symbol with
incompatible type to that defined by an earlier shared lib.
ld/
* testsuite/ld-elf/indirect5a.c,
* testsuite/ld-elf/indirect5b.c,
* testsuite/ld-elf/indirect5.map,
* testsuite/ld-elf/indirect5.out: New test.
* testsuite/ld-elf/indirect6a.c: Likewise.
* testsuite/ld-elf/indirect.exp (check_dynamic_syms): New proc.
Run new tests and check dynsyms.
